SEARCH · USGS Science

Results for “International Journal of Disaster Risk Reduction”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,661 records · Page 61Linked to original sources

USGS2025

Spatiotemporal variability of algal biomass and nitrate in Owasco and Seneca Lakes in the Finger Lakes Region, New York, in 2019

Cyanobacterial harmful algal blooms (CyanoHABs) have become increasingly common, threatening the security of water resources globally. The U.S. Geological Survey conducted high-resolution nearshore mapping surveys using boat-mounted multiparameter sondes and nitrate sensors during the summer and fall of 2019 on Owasco Lake and Seneca Lake, two lakes with documented CyanoHABs in the Finger Lakes region of New York State. Discrete sensor measurements and water-quality samples were collected at fixed points along survey routes and continuous data were generated at open-water monitoring platforms. This investigation examined whether water-quality information from nearshore surveys was representative of open-water conditions and if nearshore surveys could be used to identify areas with localized nearshore CyanoHABs and potential sources of nutrients not captured by tributary sampling. In addition to comparisons across methods, nearshore concentrations of nitrate and chlorophyll were evaluated relative to tributary outlets, cyanobacterial abundance and biovolume at discrete locations, and the locations of near-surface CyanoHABs that were designated as “confirmed with high toxins” by the New York State Department of Environmental Conservation. Nitrate and chlorophyll concentrations were comparable across methods for each lake, although concentration ranges were typically higher for nearshore mapping datasets than for nearshore discrete datasets. Nearshore surveys indicated areas of nitrate enrichment that varied temporally in both lakes. Orthophosphate was not routinely detected. Across methods, median chlorophyll concentrations were higher for the summer survey than for the fall survey in Owasco Lake. Nearshore chlorophyll concentrations varied more temporally in Owasco Lake than in Seneca Lake. Phytoplankton and cyanobacterial abundance and biovolume were about five times higher in Owasco Lake than in Seneca Lake. Cyanobacteria dominated the phytoplankton community in most samples, and Microcystis comprised the bulk of the cyanobacterial biovolume. The most abundant potential cyanotoxin-producing (specifically microcystins) genera were Microcystis , Synechococcus , Aphanocapsa , and Pseudanabaena . The cyanobacterial community composition was comparable between open-water monitoring platforms and nearshore samples. Microcystins were detected in seven survey samples from Owasco Lake, in one survey sample from Seneca Lake, and in one sample each from the open-water monitoring platforms on Owasco and Seneca Lakes that were collected about 7 days before the fall surveys. Microcystin detections were not consistently associated with high cyanobacterial cell counts or cyanotoxin-producing genera. Results from nearshore surveys were comparable to open-water monitoring platforms and discrete nearshore observations in the absence of nearshore or open-water CyanoHABs in these systems during the study. Patterns of nearshore concentrations of nitrate and chlorophyll from nearshore surveys may aid in the identification of areas with localized nitrate loading and shifts in phytoplankton abundance and community composition.

New York↗

USGS2000

Pesticides in surface waters of the Upper Colorado River Basin, Colorado, 1996-98

Forty-four river, stream, and drain sites in the Upper Colorado River Basin in Colorado were sampled during 1996-98 to determine the occurrence and distribution of pesticides in the basin. In a fixed-station study, 57 surface-water samples were collected from October 1996 through January 1998 at four sites. Each site was sampled approximately monthly for up to a year, with more frequent sampling during the spring and summer growing season. In a synoptic study, surface-water samples were collected at 43 sites in the agricultural areas of the Grand Valley and the Uncompahgre River Valley in May 1998. Each site was sampled once. Pesticide concentrations generally were low and varied seasonally and across land uses. Thirty-five pesticides were detected at least once in the two studies, and 11 pesticides accounted for almost 82 percent of the detections. Herbicides were more commonly detected than insecticides, and only the herbicides alachlor and atrazine were detected in more than 50 percent of the samples. Carbofuran was the most commonly detected insecticide and was detected in 19 percent of the samples. Pesticide detections increased and were measured at higher concentrations in the summer months and at the agriculture sites. All pesticide concentrations were less than drinking-water standards, and most complied with human-health advisories and criteria for the protection of freshwater aquatic life. Pesticides in the Upper Colorado River Basin in Colorado were detected slightly less frequently and generally at lower concentrations than in 20 National Water-Quality Assessment Program study-unit basins that collected water-quality data from 1992 through 1996. Results from surface-water sampling conducted during 1996?98 in the Upper Colorado River Basin in Colorado indicate that beneficial uses of water were not being impaired by the presence of pesticides in surface waters in the basin.

Colorado↗

USGS2024

Characteristics of the fault damage zone From high-resolution seismic imaging along the Palos Verdes Fault, California

The distribution and intensity of fault damage zones provides insight into fault activity and its relationship to fluid flow in the crust. Presently, measures of the in-situ distribution of fault damage remain limited and along-strike studies are rare. This study focuses on an offshore section Palos Verdes Fault damage zone that spans 28 km, near Los Angeles, California. To investigate the previously unresolved shallow (∼400 m below the seafloor) fault damage zone we use densely spaced (∼500 m line separation) newly collected sparker multichannel seismic lines and sub-bottom profiles. The combination of high-resolution acquisition methods and specialized seismic processing workflows provide improved imaging of shallow faulting. We apply a multi-trace similarity technique to identify discontinuities in the seismic data that may be attributed to faults and fractures. This fault detection approach reveals diverse fault damage patterns on adjacent seismic profiles. However, a discernible damage zone pattern emerges by stacking multiple damage detection profiles along strike. We find that peak damage identified in this way corresponds to the active main fault strand, confirmed in this study, and thus the technique may be useful for identifying active fault strands elsewhere. Additionally, we observe that the variable width of the damage zone along strike is controlled by fault obliquity. Furthermore, our observations reveal a correlation between fault damage and seafloor fluid seeps visible in the water column, suggesting that damage plays a role in controlling fluid flow around the fault.

California↗

USGS2025

Near-fault amplification and ground motion variability during the 2019 Ridgecrest, California sequence

We estimate ground-motion variability near the 2019 M 7.1 Ridgecrest earthquake sequence. Accurate seismic hazard estimation requires understanding ground-motion spatial correlations, yet many studies lack the dense station coverage needed to resolve small-scale variability. The 2019 M 7.1 Ridgecrest earthquake sequence presents a unique opportunity to examine ground motions and their spatial correlations at a range of interstation distances. The permanent seismic network was augmented with hundreds of temporary stations including several fault-crossing nodal arrays. We compute the event ( δE i ) and within-event ( δW ij ) residuals from the observed peak ground velocity and peak ground acceleration data to isolate potential sources of ground-motion variability. We then compare δW ij between station pairs that record an event to understand the semivariance of the ground motion versus interstation distance. By fitting an exponential model to the semivariances, we determine a correlation range of 25 km for the Ridgecrest region. Although the exponential model fits the broad-scale increase of semivariance with interstation distance, we also observe smaller-scale trends. We find that ground motions are less correlated for station pairs that are near or across faults that ruptured during the 2019 Ridgecrest sequence. We also find large, positive median δW ij with relative values 2–3 times larger than nearby stations for individual stations’ near-fault traces. Near-fault amplification and greater ground-motion variability can delineate fault zones and may locally increase the seismic hazard.

California↗

USGS2026

Core microbiomes as a potential fingerprinting method of Western USA dust sources

Introduction: Changing frequency and intensity of dust emissions impacts ecosystems and human health. Dust carries microbes, nutrients, heavy metals, and other materials that may change environmental biogeochemistry at deposition sites. Identifying dust sources provides key information on where and when mitigation strategies should be employed. However, commonly used geochemical or isotopic tracers are often not capable of distinguishing between geographic regions. Methods: We explored whether soil bacterial communities may provide distinct fingerprints of dust sources in the western United States. We identified bacterial core communities of dust from ten locations monitored by the National Wind Erosion Research Network (NWERN) with varied land use (cropland, rangeland, and playa), and compared communities to location, soil, and regional characteristics. Samples were collected monthly from Modified Wilson and Cooke (MWAC) samplers, composited by season (spring, summer, and fall), and analyzed using 16S rRNA sequencing. Results: We found distinct bacterial core communities that reflected dust source characteristics. In order of importance, precipitation levels ( p = 0.0001), location ( p = 0.0001), soil texture ( p = 0.0001), seasonality ( p = 0.0001), and elevation (p = 0.0002) were correlated with bacterial community composition. Discussion: Distinct bacterial core communities were associated with site characteristics such as biocrusts, playas, and military base proximity. Our results suggest that the use of core microbiomes may offer a fingerprinting method to identify dust source regions.

Colorado, Nevada, New Mexico, North Dakota, Oklaho↗

USGS2025

Hydrogeologic framework of the Mountain Home area, southern Idaho

In the arid western Snake River Plain around the City of Mountain Home, Idaho, declining groundwater levels concern agricultural, municipal, and other water users who rely on groundwater for sustenance because surface-water resources are limited. The U.S. Geological Survey developed this hydrogeologic framework to provide an updated characterization of groundwater resources in the western Snake River Plain around the City of Mountain Home. The hydrogeologic framework comprises: (1) a conceptual description of hydrogeologic units, (2) a three-dimensional hydrogeologic model and borehole database, (3) a map of groundwater levels and change, and (4) a discussion of groundwater occurrence and movement within the study area. Hydrogeologic units were defined based on existing literature and the borehole database compiled for this study; the five hydrogeologic units are granite, rhyolite, basalt, fine-grained sediments, and coarse-grained sediments. Each unit can bear water, but the main regional aquifer in the study area occurs in the basalt and fine-grained sediment units with depth to water ranging from 150 to 765 feet. A perched groundwater zone near the City of Mountain Home is primarily hosted in basalt and used domestically with most depths to water ranging from 30 to 100 feet. Interflow zones, scoria, and vertical fractures create heterogeneity within the basalt hydrogeologic unit that exerts strong control on groundwater movement, creating horizontal perching conditions and zones of enhanced vertical conductivity that facilitate downward groundwater percolation. In the fine- and coarse-grained sediments and rhyolite units, inferred faults both impede and enhance groundwater movement. The borehole database was constructed by digitizing 540 well-driller reports and was used to build a three-dimensional hydrogeologic framework model which reasonably represents the spatial distribution of hydrogeologic units in the study area. Generally, fine-grained sediments underlie much of the study area, with basalt concentrated in the central and western study area and rhyolite and granite in the uplands to the north. Groundwater levels were measured in 180 wells in March and November 2023; these data were used to develop water-table contour maps and describe groundwater-level change over an irrigation season. Groundwater generally flows south-southwest to the Snake River and groundwater levels declined across most of the study area (from 0.03 to 22.01 feet) between spring and autumn 2023, which is consistent with long-term declines in the Cinder Cone Butte Critical Groundwater Area and Mountain Home Groundwater Management Area. Groundwater levels rose (0.6 to 15.44 feet) over the irrigation season in most wells in the perched groundwater zone near the City of Mountain Home and near the Snake River, indicating the importance of surface-water recharge to groundwater in areas where surface water irrigation occurs. In aggregate, this hydrogeologic framework provides an updated characterization of and new insights into groundwater resources in the study area to help inform water resources management.

Idaho↗

USGS2025

Widespread anhydrite saturation in Laramide-age arc magmas of southwestern USA

Anhydrite is considered a rare mineral phase in magmas, with only ∼33 documented occurrences worldwide. However, anhydrite readily decomposes in the near-surface environment, making it difficult to recognize its former presence in rocks collected at or near Earth’s surface. In such samples, only small anhydrite inclusions fully shielded within other minerals can have survived. During a recent field trip to the southwestern USA, we sampled 17 Laramide-age (ca. 40−80 Ma) magma systems, most of which are associated with porphyry copper deposits. A systematic search for anhydrite inclusions preserved within apatite, amphibole, plagioclase, and quartz phenocrysts in ∼100 rock samples by optical microscopy and Raman spectroscopy revealed that each of these 17 magma systems was at least temporarily anhydrite-saturated. Also, most previously identified magmatic anhydrite-bearing intrusions are associated with porphyry copper deposits, and both intrusive and volcanic rocks containing magmatic anhydrite show high Sr/Y ratios. These observations suggest that anhydrite saturation and porphyry copper formation are linked via magma fractionation at high pressure. Compared to average arc magmas, anhydrite-bearing magmas are unusually oxidized and sulfur-rich and seem to also be unusually water-rich. Hence, our preferred interpretation is that magma generation and/or fractionation at high pressure promotes the formation of superhydrous and oxidized magmas, which in turn promotes high sulfur contents and ultimately the precipitation of anhydrite. The high mineralization potential of these magmas does not need to result from their high sulfur content but could be caused by other properties of high-pressure magmas.

Arizona, New Mexico↗

USGS2026

Rapid characterization of the 2025 Mw 8.8 Kamchatka, Russia earthquake

The 29 July 2025 M w 8.8 Kamchatka, Russia, earthquake was the sixth largest instrumentally recorded earthquake. This event was seismically well observed at regional and teleseismic distances, but publicly available near‐source data were sparse at the time of the event, presenting unique challenges for rapid source and impact characterization. The U.S. Geological Survey (USGS) National Earthquake Information Center provides global real‐time monitoring for earthquakes, including rapid response information products that estimate source characteristics, shaking, and the resulting impacts. We describe the USGS rapid response earthquake information products following the Kamchatka event and discuss their implications for ongoing hazards in the region. We describe potential improvements to our response workflows motivated by this event, including more rapid constraints on source geometries and the automated selection of fault geometries for finite‐fault inversions. The rapid response products together support the interpretation of a unilateral southwestward rupture with significant slip on the southwestern end of the rupture extent. The M w 8.8–9.0 event in 1952, which ruptured a comparable extent of the Kuril–Kamchatka subduction interface, has many similarities to the 2025 rupture. This illustrates that slip deficits may remain following great earthquakes and highlights the usefulness of comparative studies between historic and modern events.

Kuril-Kamchatka subduction zone↗

USGS2024

StreamStats—A quarter century of delivering web-based geospatial and hydrologic information to the public, and lessons learned

StreamStats is a U.S. Geological Survey (USGS) web application that provides streamflow statistics, such as the 1-percent annual exceedance probability peak flow, the mean flow, and the 7-day, 10-year low flow, to the public through a map-based user interface. These statistics are used in many ways, such as in the design of roads, bridges, and other structures; in delineation of floodplains for land-use zoning and setting of insurance rates; for regulatory purposes, such as the permitting of wastewater discharges; and for hydrologic and climate change studies. StreamStats was first developed for Massachusetts and released in 2001. The application provided users with the ability to obtain streamflow statistics computed from data collected at USGS streamgages and to obtain estimates of streamflow statistics for user-selected ungaged sites. Massachusetts StreamStats used geographic information system software and digital mapping to compute drainage-basin characteristics, which were then used in statistical models to estimate streamflow statistics for the user-selected sites. The statistical models were in the form of equations that were developed through a process known as regression analysis. StreamStats was the first known web application with the ability to do interactive geoprocessing. The utility of Massachusetts StreamStats was instantly apparent, leading the USGS to develop a version of StreamStats that could be implemented nationally. USGS State offices normally were required to develop custom regression equations and prepare local digital mapping data needed for implementing StreamStats for their States. Funding needed to complete this work usually was provided through cooperative agreements between the USGS and State agencies. In 2004, Idaho became the first to be released in the national version of StreamStats. By 2023, 44 States were fully implemented and six were undergoing implementation. StreamStats has undergone many modifications over the years to keep up with changes to the underlying software and to add functionality. Customized functionality and separate linked StreamStats applications were developed for several States. Meeting the high demand for additions and improvements to StreamStats while also adhering to budgetary constraints has, at times, been challenging. The StreamStats development team has identified numerous additional improvements that could be made to provide better performance and more functionality. The lessons learned from the experience of building and operating StreamStats for nearly 25 years could be relevant to others interested in pursuing efforts of a similar scale.

Circular↗

USGS2024

Three-dimensional temperature maps of the Williston Basin, USA: Implications for deep hot sedimentary and enhanced geothermal resources

As part of U.S. Geological Survey's (USGS) efforts to identify and assess geothermal energy resources of the US, a three-dimensional (3D) geologic and thermal model has been constructed for the Williston Basin, USA. The geologic model consists of all sedimentary units above the Proterozoic and Archean crystalline rock (called basement herein), with a total sedimentary thickness of up to 5 km near the basin center. Twenty-nine geologic units were mapped from interpreted formation tops from 16,465 wells. A 3D temperature model was constructed to a depth of 7 km by constructing a 3D heat flow model for the sedimentary units, followed by estimating underlying temperature using a one-dimensional (1D) analytic solution for heat flow within the underlying crystalline basement. Using the sedimentary basin model, heat flow was simulated in 3D and was calibrated using three temperature datasets: 1) 24 high-confidence static temperature logs (equilibrium thermal profiles), 2) more than15,000 drill stem test (DST) measurements from >7,000 wells, and 3) more than 45,000 bottomhole temperature (BHT) measurements from >14,000 wells. The DST and BHT datasets provide broad spatial coverage, but are lower confidence, primarily because measurements were made prior to attaining thermal equilibrium. DST and BHT measurements were binned regionally to develop representative thermal profiles that generally agree with these lower quality data (hereafter called pseudowell temperature profiles). Layer properties (primarily thermal conductivity and compaction curves) were set to best estimate values, then the heat flow model was calibrated to fit pseudowell and static temperature logs primarily by adjusting basal heat flow to approximate the overall temperature profile. Minor adjustments to thermal conductivity allowed adjusting changes in slope at lithologic contacts. Resulting maps include 3D temperature and basal (bottom of sedimentary units) heat flow estimates, which are used as input for the temperature model of the basement. The crystalline basement temperature model uses an analytic 1D solution to the heat flow equation that requires estimates of heat flow and temperature at the upper boundary (i.e., the sediment/basement contact), radiogenic heat production within the crystalline basement, and reference thermal conductivity (i.e., uncorrected for temperature). Two regions of high heat flow are identified: 1) in western North Dakota along the North American Central Plains Conductivity Anomaly and 2) in eastern Montana near the Poplar dome. Within the sedimentary column in the center of the basin of the basin, an area of approximately 100,000 km2 is predicted to have moderate- to high-temperature geothermal resources (>90 °C) under the thickest sequences of sediments. Where thick insulation and high heat flow coincide, electric-grade resources can be less than 4 km deep. Assuming a maximum feasible drilling depth of 7 km, temperatures are predicted to be as high as 175 °C. The geologic model may be used to identify strata at sufficient temperatures that may have natural permeability or that may have conditions that favor development of enhanced/engineered geothermal systems resources.

Montana, North Dakota, South Dakota↗

USGS1976

Availability of ground water in the area surrounding the Trident submarine construction facility, Kitsap County, Washington

This report provides general information on the water resources--with emphasis on ground-water occurrence and availability--in that part of Kitsap County (referred to as Trident Impact Area) that would be most affected by the development of the Trident submarine-construction facility at Bangor. Ground water occurs principally in a lower, confined aquifer near and below sea level and an upper, unconfined aquifer above sea level; both aquifers are extensive beneath the study area and are composed of sand and gravel layers separated by poorly permeable silt, clay, and till layers. Locally throughout the area efficiently constructed wells tapping each of the two aquifers are capable of yielding 100 to 1,300 or more gallons per minute. The estimated 1970 water use in the study area averaged about 13 million gal/day (gallons per day); of this amount about 9 million gal/day came from surface-water sources--from a large reservoir outside the study area--and about 4 million gal/day came from ground water pumped from the two aquifers. Anticipated water use soon will be about 18 to 21 million gal/day; virtually all the additional quantity required (about 5 to 8 million gal/day) above present use must come from ground-water sources. Preliminary evaluation of the aquifers suggests that an additional 1.5 million gal/day can be developed from the upper aquifer and 7 million gal/day from the lower aquifer. Existing wells tapping the lower aquifer might yield additional water and increase the total yield in the area by 3.5 million gal/day, and new wells drilled in selected areas could produce an additional 3.5 million gal/day from this aquifer. However, additional, large-scale ground-water withdrawal from the lower aquifer could induce saltwater intrusion into wells situated in coastal areas. Recommended future studies include additional data collection, monitoring of chloride concentrations in water from large-yield coastal wells, confirmation of well yields and capacities, and test-well drilling and analysis.

Washington↗

USGS2024

Mafic alkaline magmatism and rare earth element mineralization in the Mojave Desert, California: The Bobcat Hills connection to Mountain Pass

Occurrences of alkaline and carbonatite rocks with high concentrations of rare earth elements (REE) are a defining feature of Precambrian geology in the Mojave Desert of southeastern California. The most economically important occurrence is the carbonatite stock at Mountain Pass, which constitutes the largest REE deposit in the United States. A central scientific goal is to understand the genesis of the carbonatite ore body in the context of widespread REE-rich igneous activity. A swarm of mafic alkaline (shonkinite) dikes has been mapped and sampled at Bobcat Hills, 65 km southeast of the Mountain Pass mine. Whole-rock geochemistry and zircon geochronology demonstrate a clear affinity to the ca. 1.4 Ga Mountain Pass intrusive system. Bobcat Hills dikes have comparably high REE concentrations (La ∼1,000× chondritic) and an error-weighted mean 207 Pb/ 206 Pb zircon crystallization age of 1,426 ± 2 Ma (2 σ ). Unlike the alkaline intrusions at Mountain Pass, which have abundant inherited zircon from Paleoproterozoic basement rocks and crustally influenced oxygen isotope compositions (δ 18 O zircon = 6.5–7.5‰), the Bobcat Hills dikes lack any evidence of crustal assimilation and have oxygen isotope values that overlap a mantle range (Bobcat Hills average δ 18 O zircon = 5.6 ± 0.3‰). The dikes were a high-temperature, early center of mafic alkaline magmatism in the Mojave Desert that serve as a snapshot of melt generation from a spatially extensive, metasomatized mantle source. We propose that modification of the crust over many tens of Myr at Mountain Pass created an environment that favored crustal assimilation and enabled ascent of late-stage, REE-rich carbonatite magmas.

California↗

USGS2025

Landsliding follows signatures of wildfire history and vegetative regrowth in a steep coastal shrubland

Five years after the deadly and destructive 9 January 2018 Montecito debris flows (Santa Barbara County, California, USA), an atmospheric river storm on 9 January 2023 triggered widespread landsliding that affected many of the same drainages in the Santa Ynez Mountains. Using high-resolution aerial imagery, we identified >10,000 landslides over an ∼160 km 2 area. Most of the landslides were shallow (<1 m in depth) translational debris slides that initiated on steep (∼40°), south-facing hillslopes, with the highest incidence of landsliding in a sandstone-dominated bedrock unit. The landslides mobilized into debris flows and delivered substantial quantities of sediment downstream, which contributed to costly infrastructure impairments. We detected order-of-magnitude differences in landslide density across the study area that could not be attributed to variations in geomorphology (topographic aspect and slope), geology (bedrock type), or hydrology (seasonal antecedent rainfall, peak hourly storm rainfall intensity, total storm rainfall), which are usually considered relevant factors for shallow landsliding. Rather, we found that vegetation regrowth following wildfire was likely a relevant factor associated with the highly variable landslide densities. Hillslopes with less and different types of vegetation regrowth after fire appear to have been more susceptible to shallow landslides. We identify a possible vegetation control on postfire landsliding, which highlights an opportunity for hypothesis testing using more advanced techniques to track the evolution of vegetation cover and vegetation type in steep shrubland environments following wildfire.

California↗

USGS2025

Site response and wave propagation effects in the eastern United States

Fourier amplitude spectra from regional earthquakes in the eastern United States are used in a parametric inversion for source, path, and site effects. Five earthquakes are selected for analysis during the installation of the United States National Seismic Network (US), Earthscope’s USArray Transportable Array (TA), and other temporary arrays to maximize station coverage. A global search algorithm is used to solve for site response from 0.1 to 15 Hz, corner frequency, geometrical spreading ( r - γ ), and frequency dependent anelastic attenuation in the form Q(f) = Q o f α . Tradeoff between moment and geometric spreading is handled by fixing the moment. The tradeoff between corner frequency and Q(f) is solved by selecting the value of corner frequency that minimizes an objective function defined over all stations. Values of site response and attenuation parameters show a strong spatial correlation with the physiographic provinces of the eastern United States. Site response for the Atlantic Coastal Plain is consistent with previous work using spectral ratios relative to a reference site, defined by strong resonance peaks correlated with the thickness of sediments. Site response for the other physiographic provinces is markedly different from the coastal plain, with a lack of distinct resonance peaks and a broad moderate high at frequences from 0.1 to 0.5 Hz consistent with the hard-rock geology of the regions. Like site response, Q(f) has a strong correlation with physiographic province, showing lower values on the coastal plain and higher values inland. Geometric spreading exponent, γ, decreases with increasing hypocenter distance from just above 1 at a few tens of kilometers to 0.9 at 500 km. The limited range in geometric spreading values is attributed to starting the Fourier transform window at the S ‐wave arrival for all distances and averaging over multiple wave types.

eastern United States↗

USGS2008

Geology and geochemistry of Jurassic plutonic rocks, Baboquivari Mountains, south-central Arizona

Among the plutons of the Jurassic magmatic arc segment in southern Arizona, northern Sonora, and southern California, two distinctive rock types dominate, occurring together in numerous mountain ranges: porphyritic, titanite-bearing hornblende-biotite granodiorite; and biotite leucogranite. These characteristic rocks are particularly well preserved and well exposed around Kitt Peak, in the Baboquivari Mountains, southern Arizona. The Middle to early Late Jurassic Kitt Peak Plutonic Suite (KPPS) comprises three units: Aguirre Peak Quartz Diorite (APQD;<170 Ma, >=165 Ma, U-Pb), chiefly hornblende mesodiorite; Kitt Peak Granodiorite (KPGD; 165 Ma), hornblende-biotite granodiorite and monzogranite; and Pavo Kug Granite (PKG; 159 Ma), equigranular biotite leucogranite. This range also hosts a fourth, regionally unusual, Jurassic plutonic unit: the Baboquivari Peak Perthite Granite, related to post-arc, Late Jurassic crustal extension. Binary variation diagrams, incompatible element patterns, and REE spectra indicate APQD and KPGD are consanguineous. APQD basaltic mesodiorite evidently approximates the parental magma for the APQD–KPGD series. More evolved rocks of this series evidently formed by combinations of fractional crystallization and mixing with or assimilation of crustal material. PKG is less directly related to APQD and KPGD than these two are to one another.

Arizona, Sonora↗

USGS2026

Numerical modeling of Late Pleistocene to Holocene earthquake-induced progressive rock slope damage in the paraglacial Serpentine valley, Prince William Sound, Alaska

Landslides in deglaciating fjords pose a potential tsunami threat to nearby communities; however, processes contributing to long-term progressive rock damage and landslide conditioning remain poorly constrained in paraglacial settings. Here, we analyse the role of earthquake-induced rock mass damage over late Pleistocene to Holocene time scales, as a conditioning factor for modern landslides, using distinct element numerical modelling to assess spatial and temporal patterns of fracture propagation influenced by varying glacier thickness. Conceptualised numerical models were parameterised by in situ rock mass, glacial and topographic conditions in Serpentine valley, located in Prince William Sound, Alaska, where several large landslides are actively developing along the western valley wall. Results show that although rigid glacier buttressing reduces co-seismic rock mass damage, it does not suppress it completely, and damage occurs both above and below the glacier surface elevation. We demonstrate that topography, and especially steep slopes with topographic convexity, as well as preexisting damage of joint networks and faults inherited from tectonic and exhumation induced stresses, exert primary control on the location of new co-seismic damage. Simulations representing a simplified deglaciation sequence over the past 25 ka, with a series of 10 evenly spaced earthquakes, generated rock mass damage patterns that qualitatively match in situ landslide structural and kinematic observations at one instability in Serpentine valley. Our conceptual study helps clarify the role of repeated seismicity over glacial timescales as a long-term conditioning process for paraglacial rock slope failure, highlighting spatial and temporal patterns of progressive damage accumulation, with outcomes relevant for modern landslide hazard assessment.

Alaska↗

USGS1998

Technique for simulating peak-flow hydrographs in Maryland

The efficient design and management of many bridges, culverts, embankments, and flood-protection structures may require the estimation of time-of-inundation and (or) storage of floodwater relating to such structures. These estimates can be made on the basis of information derived from the peak-flow hydrograph. Average peak-flow hydrographs corresponding to a peak discharge of specific recurrence interval can be simulated for drainage basins having drainage areas less than 500 square miles in Maryland, using a direct technique of known accuracy. The technique uses dimensionless hydrographs in conjunction with estimates of basin lagtime and instantaneous peak flow. Ordinary least-squares regression analysis was used to develop an equation for estimating basin lagtime in Maryland. Drainage area, main channel slope, forest cover, and impervious area were determined to be the significant explanatory variables necessary to estimate average basin lagtime at the 95-percent confidence interval. Qualitative variables included in the equation adequately correct for geographic bias across the State. The average standard error of prediction associated with the equation is approximated as plus or minus (+/-) 37.6 percent. Volume correction factors may be applied to the basin lagtime on the basis of a comparison between actual and estimated hydrograph volumes prior to hydrograph simulation. Three dimensionless hydrographs were developed and tested using data collected during 278 significant rainfall-runoff events at 81 stream-gaging stations distributed throughout Maryland and Delaware. The data represent a range of drainage area sizes and basin conditions. The technique was verified by applying it to the simulation of 20 peak-flow events and comparing actual and simulated hydrograph widths at 50 and 75 percent of the observed peak-flow levels. The events chosen are considered extreme in that the average recurrence interval of the selected peak flows is 130 years. The average standard errors of prediction were +/- 61 and +/- 56 percent at the 50 and 75 percent of peak-flow hydrograph widths, respectively.

Maryland↗

USGS2025

Sand provenance boundary in the Mu Us Sandy Land of northern China

Desert dunes are often assumed to have uniform mineral compositions due to extensive mixing during lateral transport, which complicates provenance studies. The Mu Us Sandy Land in north-central China, near the East Asian summer monsoon precipitation boundary, experiences a wetter climate than most deserts. Climate wetting as a result of a warming climate, and the ‘Sand Control Project’ implemented by the Chinese government to decrease the lateral movement of sand dunes in this area provide an opportunity to study surface processes of sand production and transport. Previous studies using zircon U Pb geochronology and heavy mineral composition indicate distinct sand sources for the Mu Us Sandy Land: local basement-derived middle Yellow River sediments and recycled dried-up lacustrine sediments for the eastern part, and northeastern Tibetan Plateau-derived upper Yellow River sediments for the western part. However, zircons and heavy minerals only represent trace amounts of the bulk mineralogy within a sand dune, so broader provenance analysis targeting common minerals is essential. We focus on the area near the proposed provenance difference boundary between the western and eastern Mu Us Sandy Land, using comprehensive sampling and provenance techniques to confirm distinct provenance characteristics and delineate the provenance boundary. Our findings reveal that sand from most of the Mu Us Sandy Land originated from the erosion of local basement by the middle Yellow River and recycled local dried-up lacustrine sediments, whereas the southwestern corner and the neighboring western-central Chinese Loess Plateau received sediments from the distal northeastern Tibetan Plateau.

Mu Us Sandy Land↗