USGS ScienceSearch

SEARCH · USGS Science

Results for “Hydrology and Earth System Sciences (HESS)”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,661 records · Page 61Linked to original sources

Relatively stable pressure effects and time-increasing thermal contraction control Heber geothermal field deformation

Due to geological complexities and observational gaps, it is challenging to identify the governing physical processes of geothermal field deformation including ground subsidence and earthquakes. In the west and east regions of the Heber Geothermal Field (HGF), decade-long subsidence was occurring despite injection of heat-depleted brines, along with transient reversals between uplift and subsidence. These observed phenomena contradict current knowledge that injection leads to surface uplift. Here we show that high-yield production wells at the HGF center siphon fluid from surrounding regions, which can cause subsidence at low-rate injection locations. Moreover, the thermal contraction effect by cooling increases with time and eventually overwhelms the pressure effects of pressure fluctuation and poroelastic responses, which keep relatively stable during geothermal operations. The observed subsidence anomalies result from the siphoning effect and thermal contraction. We further demonstrate that thermal contraction dominates long-term trends of surface displacement and seismicity growth, while pressure effects drive near-instantaneous changes.

California

High-pass corner frequency selection and review tool for use in ground-motion processing

Raw seismological waveform data contain noise from the instrument’s surroundings and the instrument itself that can dominate recordings at low and high frequencies. To use these data in ground‐motion modeling, the effects of noise on the signals must be reduced and the signals’ usable frequency range identified. We present automated procedures to efficiently reduce low‐frequency noise that are implemented in the software package gmprocess. These procedures check for, and as needed remove, low‐frequency artifacts in the displacement record using polynomial fits, which can be used in combination with existing signal‐to‐noise ratio (SNR)‐based corner‐frequency selection procedures. The automated selections are then efficiently verified and refined using a graphical user interface (GUI) that plots relevant ground‐motion time series and spectra and tracks modifications to signal processing parameters. We demonstrate these procedures using recordings from the 2020 M 5.1 Sparta, North Carolina, and the 2013 M 4.7 southern Ontario earthquakes. Data processed with the SNR‐only and polynomial criteria for these events contain displacement artifacts in 37% and 23% of processed traces, respectively. Records with remaining artifacts are corrected manually using the GUI. These processing steps illustrate the workflow for efficient data processing with quality control.

Seismological Research Letters

Measurement of in situ-produced cosmogenic nuclides in fine-grained quartz from shale

In situ -produced 10 Be in quartz is widely used to constrain exposure ages and denudation rates, traditionally measured in sand-sized grains. Here we report a new method for isolating fine-grained quartz from shale and demonstrate its reliability for grain sizes down to single microns. Sequential dissolution tests and analyses of grain size separates show that meteoric 10 Be is eliminated and that recoil losses during cosmogenic nuclide production are balanced by implantation from other mineral grains. High-temperature combustion leads to diffusion of meteoric 10 Be into fine-grained quartz and must be used with caution.

Nuclear Instruments and Methods in Physics Researc

Temperature

The “National Field Manual for the Collection of Water-Quality Data” (NFM) provides guidelines and procedures for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation’s surface-water and groundwater resources. This chapter, NFM A6.1, provides guidance and protocols for the measurement of temperature of air, of a surface-water body or in groundwater, which include the scientific basis of the measurement, selection and maintenance of equipment, calibration verification, troubleshooting, and procedures for measurement and reporting. It updates and supersedes USGS Techniques of Water-Resources Investigations, book 9, chapter A6.1, version 2.0, by Franceska D. Wilde. Temperature of air and water is routinely measured when water samples are collected, is often measured continually at USGS streamgages, and is a parameter regularly measured during laboratory and field experiments. The field method for measuring temperature described in this chapter is applicable to air and most natural waters. Before 2017, the NFM chapters were released in the USGS Techniques of Water-Resources Investigations series. Effective in 2018, new and revised NFM chapters are being released in the USGS Techniques and Methods series; this series change does not affect the content and format of the NFM. More information is in the general introduction to the NFM (USGS Techniques and Methods, book 9, chapter A0) at https://doi.org/10.3133/tm9A0 . The authoritative current versions of NFM chapters are available in the USGS Publications Warehouse at https://pubs.usgs.gov/ . Comments, questions, and suggestions related to the NFM can be addressed to nfm@usgs.gov .

Techniques and Methods

Geophysical characterization of an alkaline‑carbonatite complex using gravity and magnetic methods at Magnet Cove, Arkansas, USA

The Magnet Cove alkaline‑carbonatite complex (MCC), located in the Ouachita Mountains of south-central Arkansas in the United States, hosts an extensive variety of rare rock types and critical mineral resources with physical properties (density and magnetization) that contrast significantly with the sedimentary rocks into which they have intruded. Newly acquired ground-based gravity and magnetic data were used to develop two-dimensional and three-dimensional geophysical models of the Cretaceous-aged Magnet Cove intrusive complex. The models reveal that the MCC: (1) widens out at middle crustal depths to as much 22 km across, and may reach a depth of 20 km; (2) has a total volume (exposed and subsurface) that may be over 800 km 3 ; (3) is likely connected at depth to other intrusions in the Arkansas alkaline province; and (4) has a geometry that is aligned with pre-existing structures such as the Reelfoot rift and the Ouachita orogenic belt, some of which were likely structurally controlled by the Precambrian crystalline basement and the continent-ocean transition zone buried beneath the Ouachita orogen. For the first time, the magnetic models of the MCC account for the presence of strong remanent magnetization. This results in a geophysical workflow necessary to accurately interpret magnetic anomalies over the much larger Arkansas alkaline province, its geologic and structural framework, and critical mineral potential.

Arkansas

Baseflow and snowmelt sustained streamflow in the Upper Colorado River Basin, 1986-2020

The Upper Colorado River Basin (UCRB) faces substantial water availability limitations. Although most streamflow originates as snowmelt, the partitioning of snowmelt between surface runoff and groundwater recharge and subsequent groundwater discharge to streams is highly uncertain. On average, over half of the streamflow in the UCRB is estimated to originate from groundwater discharge to streams, highlighting the importance of baseflow in sustaining surface water. However, the historical patterns of baseflow and streamflow, along with their variability over space and time and their specific sources, remain unknown at the basin scale. This study addresses those gaps by characterizing the sources and transport pathways of both baseflow and streamflow in the UCRB at a seasonal timestep from 1986 to 2020, including the lagged delivery of subsurface water to streams beyond the current season, using coupled models of baseflow and streamflow. Between 1986 and 2020, on average 63% of UCRB streamflow originated from baseflow. About half of this baseflow took longer than one season to reach streams, and outside the snowmelt season, baseflow was the dominant source of streamflow. Snowmelt was a key source of both baseflow and streamflow. Current season snowmelt contributed 33% of streamflow via runoff, and 22% of the 29% of streamflow that originated as current season baseflow via subsurface flow to streams. Over the study period, baseflow index (BFI) declined in headwaters and increased at mid-elevations. Springtime increases in BFI demonstrate the increasingly important role baseflow plays in water supply. Identifying the sources, locations, and timing of water that contributed to the UCRB outlet can inform management of water resources in the basin.

Arizona, Colorado, New Mexico, Utah, Wyoming

Using peak geometry and shifts in the x-ray spectrum of carbon from electron probe microanalysis to determine thermal maturity of organic matter

During the burial of mudstones, the associated organic matter undergoes gradual thermal maturation, a key process that can influence the reactivity of organic matter during catagenesis, the formation of hydrocarbon deposits and the chemical weathering of mudstones. Conventional methods for assessing the thermal maturity of organic matter often fail to reflect the geochemical heterogeneity between individual organic phases in mudstone samples. Here, we report an alternative, non-destructive, surficial and micro-scale (analytical spot size of ~ 300 nm with about 4 μm diffusion depth for micrometre-size organic grains) method to evaluate the thermal maturity of organic matter in mudstones using the carbon K α X-ray spectrum measured by field emission-electron probe microanalyser (FE-EPMA). Using this method, we observed correlations between parameter values derived from FE-EPMA spectra, including the peak position, the peak area and the intra-sample heterogeneity of these measurements, and independently measured vitrinite/solid bitumen reflectance for a suite of mudstones, representing different age, geological context and burial depth. With the increased values in peak area and position, we identified an increase in the carbon mass fraction of organic matter and the mean nominal oxidation state of carbon approaching zero. These trends, which are consistent with aromatisation and graphitisation, provide the rationale for using FE-EPMA to estimate the thermal maturity of organic matter. To explore some of these trends in more detail, we employed time-of-flight secondary ionisation mass spectrometry, X-ray photoelectron spectroscopy and optical reflectance measurements on a subset of samples.

Geostandards and Geoanalytical Research

Investigation of drivers and sources of potential harmful algal blooms in Lake Anna, Virginia, 2023-24

Algal blooms in freshwater reservoirs are an increasing concern because of the risk to aquatic ecosystem health, recreational use, and water quality. Among the taxa that comprise an algal bloom, cyanobacteria are of particular concern due to the potential to produce toxic compounds which can cause acute and chronic illness in humans if ingested through contaminated water or shellfish. When toxins are above a toxin-specific threshold in the water column, the Commonwealth of Virginia categorizes the bloom as a harmful algal bloom (HAB), distinguishing it from an algal bloom without toxins present. Toxins are of particular concern in bodies of water which serve as major recreational areas, such as Lake Anna in central Virginia. Lake Anna is a 27 km-long and 47 km2 reservoir in central Virginia. Since the Commonwealth of Virginia revised the HAB monitoring framework in 2018, algal bloom advisories for potentially toxigenic blooms have been issued in the western, riverine zone of the reservoir. There were detections of microcystin and anatoxin production but no detections of cylindrospermopsin and saxitoxin production in Lake Anna; however, toxin concentrations were low, at values less than 0.65 µg/L. In 2023, the U.S. Geological Survey, in cooperation with Virginia Department of Environmental Quality, initiated a 19-month intensive and extensive study of western Lake Anna and its tributaries (North Anna River and Pamunkey Creek) to (1) characterize the algal community, biomass, and toxin production; (2) identify potential drivers leading to algal bloom initiation, persistence, and decline; and (3) assess the primary sources of the drivers contributing to algal blooms. Continuous and discrete monitoring of water quality within the lake, watershed inputs, meteorological conditions, and algal communities were monitored. Multiple modeling scenarios identified that the formation and persistence of algal blooms in Lake Anna are driven by interactions among chemical, macro- and micronutrient, and physical factors. Key drivers include total nitrogen, total phosphorus, water temperature, suspended sediment concentration, wind speed, copper, iron, molybdenum, nickel, sodium, and alkalinity. During this study, winter stormflow events delivered the highest loading of macro- and micronutrients from the tributaries to the lake. The lake is a sink for these nutrients in the water column or in the lake-bed sediments. During high-occupancy and recreation periods on the lake in the summer months, boating activity can promote internal loading by the resuspension of the lake-bed sediments, thereby increasing the nutrient availability for algal uptake. Thermal stratification and hypoxic conditions were observed, which can contribute to the passive release of nutrients into the water column, further facilitating algal bloom proliferation. These processes may create a positive feedback loop that supports the formation, persistence, and annual recurrence of algal blooms in the western region of Lake Anna. Continued water-quality monitoring of early warning indicators may improve the detection and forecasting of algal growth in the lake and help managers proactively manage water quality and algal growth.

EarthArXiv

Alternative approaches to dryland reclamation enhance vegetation cover and soil stability at a former uranium mine

Introduction Conventional reclamation methods to recover dryland ecosystems after mineral extraction often have low success. Alternative reclamation techniques may help overcome the many challenges to establishing persistent native vegetation and stable soils. Objectives Compare conventional reclamation approaches that focus primarily on soil stabilization to alternative approaches that may improve native ecosystem restoration at the Kanab North Mine in northern Arizona. Methods In a fully crossed experiment, conventional seed mix (native and non-native species) and seeding methods (drill-seeding) were compared to alternative practices, including a native-only seed mix, connectivity modifiers (ConMods) with hand seeding, and a biocrust inoculation. Restoration metrics like plant establishment, species composition, soil surface cover and stability, biocrust establishment, and near-surface wind-driven sediment were monitored over the first 5 years post-reclamation. Results While all restoration metrics improved with time, compared to traditional methods, ConMods increased total, graminoid, and native plant species cover, and the native-only seed mix increased woody, native, and perennial species cover. Biocrust inoculation increased late-successional biocrust development, but biocrusts only persisted over 5 years in combination with ConMods. Soil stability increased in all treatments, but both ConMods and biocrust inoculation increased stability compared to traditional practices. Conclusion Overall, alternative approaches to reclamation tested here (ConMods, native seed, and biocrust inoculation) were more effective than traditional practices at increasing total plant cover, facilitating biocrust establishment, and promoting soil stability after uranium mine reclamation.

Arizona

Methodology for compilation of previously published contour data showing the altitude of the base of Dakota Sandstone on the Colorado Plateau, Arizona, Colorado, New Mexico, and Utah

Structure contours and other geologic information from numerous published geologic maps were digitized and compiled into a digital dataset showing the configuration of a single stratigraphic datum, the base of the Dakota Sandstone and its equivalents across the Colorado Plateau. The principal maps compiled in digital form are a series of 1:250,000-scale 1 degree (°) × 2° quadrangle maps published by the U.S. Geological Survey, augmented by other geologic maps published at various map scales. The compiled digital dataset contains geologic map polygons of the Dakota Sandstone and regional stratigraphic equivalents, the location of faults and fold axes, structure contour lines that define the altitude of the base of the unit and bedding orientation data computed from the structure contour lines. This report provides the scientific rationale for compilation of these data and describes the compilation methodology for each of the data elements. This report provides an extended description of the data compilation in a companion U.S. Geological Survey digital data release of spatial data and attributes associated with the contoured surface and associated geologic data layers.

Arizona, Colorado, New Mexico, Utah

Hydrogeologic mapping and three-dimensional geologic modeling of glacial deposits in a multicounty area of southeastern Michigan, northeastern Indiana, and northwestern Ohio

The glacial deposits underlying southeastern Michigan, northeastern Indiana, and northwestern Ohio are a substantial source of water to communities, agriculture, and industry in the region. Previous efforts to characterize aquifer materials in the area cited a need for additional information about the underlying hydrogeologic characteristics and related groundwater availability as well as improved mapping of the extent and properties of the glacial deposits. Recent U.S. Geological Survey multi-State compilations of water-well drilling records have greatly increased access to high-resolution geologic data, particularly in glacial depositional environments. This study by the U.S. Geological Survey, in cooperation with the Ohio Environmental Protection Agency, uses processed data from the State-managed collections of well records to characterize the glacial deposits in the study area using two methods. The first method creates two-dimensional maps of basic hydrogeologic information commonly required for assessments of groundwater availability, including (1) total thickness of glacial deposits, (2) total thickness of coarse-grained deposits, (3) specific-capacity-based transmissivity and hydraulic conductivity, and (4) texture-based estimated equivalent horizontal and vertical hydraulic conductivity and transmissivity. The second method builds a hydrogeologic framework of the complex glacial aquifer through construction of a volumetric geologic model by using three-dimensional kriging. Results of the volumetric model indicate that aquifer materials are primarily concentrated in the western parts of the study area near the Indiana-Ohio border. Coarse-grained sediments are also present as surficial deposits in the north of the study area where intermixing glacial advances created complex distributions of unconsolidated deposits. Two-dimensional maps of hydrogeologic properties support the volumetric model, showing thicknesses of coarse-grained deposits that reach up to 250 feet in the western sections of the study area and progressively thin to near absence in the east. Visualization of the aquifer materials with a volumetric model generally shows a highly discontinuous distribution of coarse- and fine-grained materials, with no clearly defined boundaries to delineate the extent of the aquifer. Comparisons of cross sections derived from the volumetric model with existing published maps support previous near-surface hydrogeologic interpretations while filling gaps where data are sparse, particularly in deeper parts of the aquifer. Both the two-dimensional maps and the volumetric model provide data that can directly inform assessments of groundwater availability, in addition to having future applications to studies of groundwater flow and transport.

Indiana, Michigan, Ohio

Environmental setting and water-quality issues in the lower Tennessee River basin

The goals of the National Water-Quality Assessment Program are to describe current water-quality conditions for a large part of the Nation's water resources, identify water-quality changes over time, and identify the primary natural and human factors that affect water quality. The lower Tennessee River Basin is one of 59 river basins selected for study. The water-quality assessment of the lower Tennessee River Basin study unit began in 1997. The lower Tennessee River Basin study unit encompasses an area of about 19,500 square miles and extends from Chattanooga, Tennessee, to Paducah, Kentucky. The study unit had a population of about 1.5 million people in 1995. The study unit was subdivided into subunits with relatively homogeneous geology and physiography. Subdivision of the study unit creates a framework to assess the effects of natural and cultural settings on water quality. Nine subunits were delineated in the study unit; their boundaries generally coincide with level III and level IV ecoregion boundaries. The nine subunits are the Coastal Plain, Transition, Western Highland Rim, Outer Nashville Basin, Inner Nashville Basin, Eastern Highland Rim, Plateau Escarpment and Valleys, Cumberland Plateau, and Valley and Ridge.The lower Tennessee River Basin consists of predominantly forest (51 percent) and agricultural land (40 percent). Activities related to agricultural land use, therefore, are the primary cultural factors likely to have a widespread effect on surface- and ground-water quality in the study unit. Inputs of total nitrogen and phosphorus from agricultural activities in 1992 were about 161,000 and 37,900 tons, respectively. About 3.7 million pounds (active ingredient) of pesticides was applied to crops in the lower Tennessee River Basin in 1992. State water-quality agencies identified nutrient enrichment and pathogens as water-quality issues affecting both surface and ground water in the lower Tennessee River Basin. Water-quality data collected by State and Federal agencies between 1980 and 1996 were summarized to characterize surface- and ground-water quality of the subunits with respect to these issues. Median concentrations of nitrogen species generally were less than 1 milligram per liter in surface and ground water in all subunits, and were highest throughout the subunits that had the largest percentages of agricultural land use. Median phosphorus concentrations also were less than 1 milligram per liter in all subunits. Phosphatic limestones present in two subunits had a larger effect on phosphorus concentrations in surface and ground water than did the amount of agricultural land use in these subunits. Median counts of fecal coliform were higher in surface water than in ground water in all subunits. The highest median counts in surface water were in the Valley and Ridge (7,500 colonies per 100 milliliters) and the Outer Nashville Basin subunits (5,000 colonies per 100 milliliters). Highest median counts in ground water were in the Inner and Outer Nashville Basin subunit. Natural setting likely has an important effect with respect to fecal contamination of surface and ground water in the lower Tennessee River Basin.

Alabama, Georgia, Kentucky, Mississippi, Tennessee

Water-quality assessment of south-central Texas — Descriptions and comparisons of nutrients, pesticides, and volatile organic compounds at three intensive fixed sites, 1996-98

Water-quality samples were collected during April 1996-April 1998 at three intensive fixed sites in the San Antonio region of the South-Central Texas study unit as part of the U.S. Geological Survey National Water-Quality Assessment Program. The sampling strategy for the intensive fixed-site assessment is centered on obtaining information about the occurrence and seasonal patterns of selected constituents including nutrients, pesticides, and volatile organic compounds. The three sites selected to determine the effects of agriculture and urbanization on surface-water quality in the study unit are Medina River at LaCoste (agriculture indicator site), Salado Creek (lower station) at San Antonio (urban indicator site), and San Antonio River near Elmendorf (integrator site). Concentrations of two nutrients, dissolved nitrite plus nitrate nitrogen and total phosphorus, were largest at the integrator site, which is downstream of municipal wastewater treatment plants. Nitrite plus nitrate nitrogen concentrations at this site often exceeded the U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL) for drinking water. All total phosphorus concentrations at the site exceeded the EPA recommended maximum concentration for streams not discharging directly into reservoirs. Nitrite plus nitrate nitrogen concentrations at the integrator site tended to be smaller, and total phosphorus concentrations at the urban site tended to be larger in samples collected during stormflow than during base flow. The most detections and largest concentrations of three pesticides (atrazine, diazinon, and prometon) were in samples collected at the urban site. Some pesticide concentrations at the agriculture site showed a seasonal pattern of increasing concentrations during spring, the peak application season. Four pesticides (atrazine, deethylatrazine, diazinon, and prometon) were detected in at least 38 percent of samples collected at all three sites. The concentrations of all detected pesticides that have an MCL were less than the MCL at the three sites. More volatile organic compounds (VOC) were detected at the urban indicator site than at the agriculture indicator site, mostly likely because more sources are located in urbanized areas. The most VOCs detected and the largest concentrations of two VOCs (chloroform and tetrahydrofuran) were in samples from the integrator site. More VOCs were detected in samples collected at the integrator site during stormflow than during base flow. The concentrations of all detected VOCs that have an MCL were less than the MCL at the three sites.

Texas

Reservoir evolution, downstream sediment transport, downstream channel change, and synthesis of geomorphic responses of Fall Creek and Middle Fork Willamette River to water years 2012–18 streambed drawdowns at Fall Creek Lake, Oregon

Executive Summary Chapter A. Introduction Fall Creek Dam impounds Fall Creek Lake, a 10-kilometer-long reservoir in western Oregon and is operated by the U.S. Army Corps of Engineers (USACE) primarily for flood-risk management (or flood control) in late autumn through early spring months, as well as for water quality, irrigation, recreation, and habitat in late spring through early autumn. Since 2011 (water year [WY] 2012), Fall Creek Lake has been temporarily drawn down each year to facilitate downstream passage of juvenile spring Chinook salmon ( Oncorhynchus tshawytscha ) through the 55-meter (m) high dam. This annual dam operation is temporary, typically lasting about 1–2 weeks from WY 2012 through 2020 (drawdown operations in WY 2022–24 have increased to more than 6 weeks). Drawdown of the reservoir results in lake levels being lowered to the elevation near the historical, pre-dam streambed. The annual streambed drawdowns of WY 2012–18 have improved fish passage and led the USACE to formally adopt streambed drawdowns as part of annual operations at Fall Creek Dam. However, temporarily lowering the lake to streambed creates free-flowing conditions in the reservoir that result in the erosion and episodic export of predominantly sand and finer-grained sediments (less than 2 millimeters [mm]) to the lower gravel-bed reaches of Fall Creek and the Middle Fork Willamette River. The introduction of large volumes of sand and finer-grain sediment into the dam-regulated reaches downstream from Fall Creek Dam prompted questions about the geomorphic responses to annual streambed drawdowns within Fall Creek Lake and downstream reaches along Fall Creek and the Middle Fork Willamette River. The U.S. Geological Survey (USGS) in partnership with USACE initiated a comprehensive geomorphic and sediment transport investigation to assess the coupled processes of reservoir erosion, sediment evacuation from Fall Creek Lake, and patterns of sediment transport and deposition in reaches downstream from the Fall Creek Dam that have resulted from annual streambed drawdowns. The purpose of this report is to systematically describe the processes of sediment erosion, transport, and deposition at Fall Creek Lake and geomorphic interactions between reaches upstream and downstream from Fall Creek Dam that relate to dam operations. Specifically, this report focuses on evaluating geomorphic responses to streambed drawdowns from WY 2012 through 2018 and placing drawdown-induced geomorphic responses within the broader context of physiographic and historical conditions and dam operations of Fall Creek and Middle Fork Willamette Rivers. Key objectives for this study were to characterize changes in reservoir morphology and substrate at Fall Creek Lake, describe the character and temporal pattern of sediment transport downstream from Fall Creek Dam, characterize geomorphic changes in channel reaches downstream from the Fall Creek Dam, and relate these data to the annual streambed drawdowns of WY 2012–18. This study uses multiple independent monitoring and measurement approaches to assess site, reach, and river-scale geomorphic responses to drawdowns to inform dam and reservoir management. Patterns and processes of reservoir evolution were assessed with geomorphic mapping and volumetric analyses of topography through comparison of multiple digital surface models (DSMs). Just downstream from Fall Creek Dam, analyses of sediment export from the reservoir focused on suspended sediment but also incorporated bedload analyses to assess sediment sizes. Geomorphic assessments downstream from the dam used reach-scale and site-scale approaches to document changes in channel morphology and substrate, including site measurements of sand and finer-grained sediment deposition and in-channel bed-material, volumetric change analyses from comparison of digital elevation models (DEMs), and repeat geomorphic mapping. Findings from this study inform river management and dam operations by providing an understanding of (1) coupled upstream-downstream geomorphic responses to the Fall Creek Lake streambed drawdowns, (2) geomorphic responses of Fall Creek Lake streambed drawdowns in comparison to drawdowns at other large dams, (3) controls on reservoir erosion and downstream geomorphic responses, and (4) implications for future hydrogeomorphic changes that may result from continued drawdowns and monitoring activities to assess those changes. Chapter B. Reservoir Morphology and Evolution Related to Dam Operations at Fall Creek Lake To understand the volume and distribution of sediment accumulation in Fall Creek Lake since dam closure in 1965, decadal-scale sedimentation patterns (spanning approximately 1965–2016) are evaluated using a combination of storage curve analyses and geomorphic mapping. Short-term (drawdown event-scale) patterns of erosion, sedimentation, and sediment export downstream are evaluated using a combination of geomorphic mapping and change detection analyses that quantify the distribution and total volume of sediment erosion and deposition within Fall Creek Lake. Geomorphic mapping of reservoir topography and analyses of historical datasets reveals four categories of landforms and sediment processes within Fall Creek Lake related to lake level operations: lacustrine sedimentation expressed in the reservoir floor, fluvial erosion and deposition within historical stream channels during streambed drawdowns, channel-like features created by erosion within the reservoir floor during streambed drawdowns, and erosion on reservoir hillslopes. Where the reservoir floor is mapped for this study as pelagic (deep water), deposition up to 3 meters (m) thick by lacustrine processes and burial of pre-dam topography with deposits thinning toward the edges of the valley floor and upstream areas of reservoir are observed. Despite over 50 years of sediment accumulation since dam construction, the main stream channels of Fall and Winberry Creeks (or reservoir thalwegs) through the reservoir are well defined, though their distinct morphology is likely influenced by a long history of recurring historical drawdowns to or near streambed since dam construction. Unregulated streamflow and sediment transport through the reservoir primarily are confined to these channels during the streambed drawdown periods. Erosional channel-like features created by drawdowns are carved through underlying, unconsolidated reservoir floor sediments and are most prominent in the lower reservoir below minimum conservation pool (the low pool elevation during winter flood season); sediment generated from the formation of these drawdown channels is more likely to be transported through and out of the reservoir than sediment deposits along the reservoir hillslopes at the valley margins that are separated from main channels by areas of low-gradient reservoir floor. Morphologic changes in the lower reservoir topography between January 2012 and November 2016 indicate overall net erosion of about 129,500 cubic meters (m 3 ). The most prominent geomorphic changes occurred along the main channels of Fall and Winberry Creeks near the Fall Creek Dam where incision, lateral migration, and slumping banks resulted in vertical and lateral adjustments to channel position, whereas most changes fell below the detectable limit on higher-elevation reservoir floor surfaces except where erosion occurred along features mapped as drawdown channels. Chapter C. Sediment Delivery from Fall Creek Lake and Transport through Downstream Reaches USGS implemented a sediment monitoring program in WY 2013–18 to evaluate the quantity and character of reservoir sediment exported from Fall Creek Lake during streambed drawdowns. Turbidity and suspended sediments were monitored annually autumn through spring to span the WY 2013–18 streambed drawdowns; however, unequal monitoring timeframes each year reduced the ability to compare results and factors affecting sediment export from the reservoir difficult between years. These data were originally measured to develop regressions and compute suspended-sediment loads (SSL). Bedload sediment monitoring from a cableway at the Fall Creek streamgage was completed in the autumn-winter of WY 2013 and 2017. The limited number of samples and presumed variability in sediment supply from the reservoir precluded construction of streamflow and bedload discharge relations to compute more than instantaneous bedload. Sand and finer-grained silts and clays were transported from the reservoir in suspension, though some coarser grains (up to 32 mm) were also mobilized and transported downstream from the dam as bedload. Observations of increased sediment transport downstream from Fall Creek Dam coincided with lake levels approaching about 3 m (10 feet [ft] or elevation 690 ft) above the streambed regulating outlets. Suspended-sediment loads computed for the full monitoring periods WY 2013–18 at the Fall Creek streamgage, located 1.4 kilometers (km) downstream from Fall Creek Dam, range from 54,700 metric tons (t) in WY 2013 to 13,900 t in WY 2018. Although the total annual SSL varied from year to year, the overall seasonal patterns of suspended sediment transport throughout each year were similar during monitoring in WY 2013-18. Suspended-sediment loads were low prior to the drawdown, then increased rapidly as lake levels lowered and approached the streambed. In the weeks following the drawdown period, as pool levels were increased, SSL remained slightly elevated above pre-drawdown levels but generally declined through the following winter and spring except during streamflow-driven pulses of suspended-sediment transport. WY 2013 had the greatest total computed SSL for each streambed drawdown and partial-year monitoring period. SSL computed for the partial-year period have generally decreased since WY 2013 and have varied by about 6,800 t with the exception of WY 2014. WY 2014 SSL reflects anomalously low sediment export due to low streamflows and freezing conditions that stabilized reservoir floor deposits. Bedload measurements in the short 1.4-km reach between Fall Creek Dam and the Fall Creek streamgage showed an inverse correlation between bedload transport rates and discharge, which probably reflects diminishing supply of coarse-sized sediment. Sand was more abundant (60–100 percent) than gravel in bedload samples confirming sand and finer-grained sediment dominated sediment evacuated from the reservoir during streambed drawdowns at Fall Creek Lake. Chapter D. Geomorphic Responses to Fall Creek Lake Streambed Drawdowns Downstream from Fall Creek Dam In the days, weeks, and months following streambed drawdown operations at Fall Creek Dam through WY 2018, sites downstream from the dam displayed a variety of geomorphic responses to reservoir sediment delivery within the main channel and overbank areas. Evaluation of streambed elevations at two streamgages located 1.4 km downstream from the dam on Fall Creek and 16.3 km downstream from the dam on the Middle Fork Willamette River indicated the effects of drawdown sediment on bed elevations were modest and transient. Repeat particle size measurements (October 2015 and September 2016) at five sites along Fall Creek and the Middle Fork Willamette River showed similar grain-sized distributions that do not reveal substantial deposition of fine-grained sediment related to the WY 2016 streambed drawdown. Altogether, these findings indicate that transport capacity in the main, low-flow channels of Fall Creek and Middle Fork Willamette River during WY 2012–18 was sufficient to mobilize and evacuate reservoir sediments from streambed drawdowns or other bank material and tributary sources. However, other monitoring for this study indicate low-velocity zones in off-channel areas are prime locations for sand and finer-grain sediment deposition. Patterns of overbank sediment accumulation indicate that the magnitude and timing of overbank deposition on bars and low-elevation floodplain varies with proximity to the dam, geomorphic setting, streamflows, and other factors. Sand and finer-grained reservoir sediments carried as suspended-sediment load in the reaches downstream from Fall Creek Dam were deposited in overbank areas as observed with clay-horizon markers during WY 2016–17. Overbank deposition quantified with Geomorphic Change Detection (GCD) software evaluated landform-scale patterns of erosion and deposition using repeat light detection and ranging (lidar) surveys at two sites in the Upper Fall Creek reach and one site in the Jasper reach for 3 years (2012–15) and one site in the Clearwater reach for 6 years (2009–15). Deposition thickness and spatial patterns from the GCD analysis were variable; some sites had dispersed but measurable deposition while at others, deposition was highly localized and exceeded 1 m in depth. Patterns of overbank deposition illustrate interactions among bar morphology, local hydraulics, and suspended-sediment transport dynamics that can create patches of highly localized deposition. The measured deposition at the two Fall Creek GCD sites likely resulted from reservoir sediments released from Fall Creek Lake during streambed drawdowns in WY 2016 and 2017 because the limited sediment inputs from bank material (geomorphically laterally stable reach) or tributaries (no significant tributaries) provided few other sediment sources. On the Middle Fork Willamette River, observed patterns of overbank deposition could reflect sediment sourced from upstream tributaries, bank erosion, or Fall Creek Lake streambed drawdown operations. Despite the introduction of several thousand tons of reservoir sediment delivered from the Fall Creek Lake streambed drawdowns to below-dam river corridors, reach-scale mapping of channel features downstream from Fall Creek Dam shows minimal evidence of changes in channel planform or landforms that can be attributed to a drawdowns in WY 2012–16. On Upper Fall Creek reach, widespread increases in gravel bars or other in-channel sediment did not result from the five streambed drawdowns. The main changes attributable to sediment releases from Fall Creek Lake were localized increases in vegetated bar area, particularly on channel margin areas where sand and finer-grain sediment was deposited and rapidly colonized by vegetation. The area of mapped secondary water features decreased between 2005 and 2016, but that may be due to lower discharges depicted in the 2016 aerial photographs and less mapped area of inundation. Primary changes along the Lower Fall Creek reach include a 6.4 percent decrease in area of secondary water features between 2011 and 2016, and a nearly twofold increase in the area of unvegetated bars. Immediately downstream from the Fall Creek confluence, there were negligible changes in the location and areas of vegetated bars and the main wetted channel between 2005 and 2016, and local increases in bar area cannot be attributed solely to deposition of reservoir sediments from Fall Creek Lake because (1) areas along the Middle Fork Willamette River just upstream from the Fall Creek confluence display similar type and magnitude of changes and (2) some of the increases at the confluence area pre-date the drawdowns. The cumulative effect of sediment releases from Fall Creek Lake streambed drawdowns from WY 2012 to 2016 on downstream channel planform and landforms are modest compared to the river-scale transformations and planform changes that occurred in the decades following dam construction. Chapter E. Discussion of Geomorphic Responses of Fall Creek and Middle Fork Willamette River to Streambed Drawdowns at Fall Creek Lake Multiple aspects of Fall Creek Dam infrastructure and operations exert first-order controls on the magnitudes of reservoir erosion that occur during the streambed drawdowns and ultimately determine the sediment delivery to downstream reaches. Key aspects of the dam and its operations that are most relevant to assessing geomorphic responses to streambed drawdowns include the (1) dam infrastructure, including configuration and size of regulating outlets and their proximity to the streambed which dictates the capacity and competence of the river to deliver sediment to downstream reaches and mode of sediment transport as suspended-sediment load or bedload; (2) frequency of historical drawdowns and long-term, year-round dam operations and lake level management, which partly dictate reservoir morphology and locations and magnitudes of readily erodible materials; (3) dam operations and hydroclimatic conditions during the streambed drawdown (including length of the drawdown and streamflows entering the reservoir), which directly control the timing, duration and magnitude of reservoir erosion and sediment evacuation; and (4) dam operations following the streambed drawdown operation that regulate streamflows (and thereby sediment transport conditions) downstream of Fall Creek Dam which primarily reflect interactions between hydroclimatic conditions and flood control operations. Patterns of sediment erosion and evacuation observed in this study at Fall Creek Lake from WY 2012–18 suggest that reservoir erosion during annual streambed drawdowns may remain similar or decrease in future years assuming (1) annual streambed drawdown operations are implemented in similar manner as the WY 2012–18 drawdowns (in terms of duration, late autumn or early winter implementation, rate of pool-level lowering to reach streambed, and other factors), (2) streambed drawdowns coincide with similar conditions as were observed WY 2012–18 (similar sediment yield into reservoir, low reservoir inflows, limited precipitation, moderate air temperature), and (3) no major geomorphic changes in the main reservoir channels of Fall and Winberry Creeks occur (for example, channel avulsion). Under such conditions, it is hypothesized that the stream channel within the reservoir would achieve a quasi-equilibrium state with respect to annual influx and export of sediment and aided by the substantial amount of in-channel bedrock, will remain laterally stable without erosion across reservoir deposits. Patterns of sediment transport measured at the Fall Creek streamgage downstream from Fall Creek Dam provide insight into the potential effects of future streambed drawdowns at Fall Creek Lake. Analyses of suspended sediment measured in WY 2013–18 show a major reduction in suspended-sediment loads between WY 2013 and later years, indicating streamflows transporting sediment through the reservoir to downstream reaches during streambed drawdowns have become supply limited. The 6-year suspended-sediment monitoring and sampling program is insufficient to make predictions about future sediment transport conditions because of uneven monitoring periods and varying controls on reservoir sediment erosion. It is likely that future suspended-sediment loads will be variable but similar to those observed in WY 2015–18 if operational, climatic, and geomorphological factors remain similar to those monitored WY 2015–18. Suspended-sediment loads downstream from Fall Creek Lake will likely remain highest when regulating outlets are fully open and Fall Creek is free flowing with the reservoir fully drained with little to no residual pool. Over time, it is possible that the suspended-sediment loads would reflect mobilization of reservoir sediment deposited in the previous year rather than erosion of sediment deposited years or decades earlier. Bedload is likely to remain a small fraction of the total sediment load evacuated from the reservoir and is relatively modest compared with pre-dam bedload transport rates because most coarse sediment remains trapped by the dam. If sediment releases from Fall Creek Lake and ensuing streamflow conditions follow a similar pattern in the future as was assessed in this study spanning WY 2012–18, near-term geomorphic adjustments downstream of the dam are expected to be modest. Barring major operational, climatic, and geomorphological changes, local site-scale deposition on bars, overbank areas, or off-channel features that persists several months after the streambed drawdown will likely continue to be highly variable, ranging from negligible to several centimeters of deposition. At the landform-scale, low velocity areas nearest to Fall Creek Dam will likely continue to undergo rapid deposition immediately during and after a streambed drawdown event, similar to patterns observed for WY 2012–18. Some of the sediment entering these off-channel features and margin areas may be temporarily stored, then later remobilized and dispersed farther downstream. But if newly deposited sediment persists through the following spring, there is a greater likelihood that local vegetation will establish, reinforce deposited material, and trap sediment during later drawdowns. The reach-scale geomorphic changes may become more apparent if (1) streambed drawdowns continued for several decades, and geomorphic changes were measured at decadal scales or (2) the amount of sediment introduced to downstream reaches substantially increased and (or) sediment transport capacity decreased. The continued streamflow regulation of Fall Creek Dam after sediment releases provides an opportunity to strategically manage streamflows during and after the streambed drawdowns to minimize downstream sediment impacts and ensure other operational thresholds are satisfied. This study provides a comprehensive foundation of datasets and geomorphic analyses to inform dam operations at Fall Creek Lake, monitor sediment transport downstream, and consider operational schemes for future drawdowns. The datasets from this study also provide baselines of sediment transport and geomorphic conditions to assess future changes in reservoir and downstream environments. Future monitoring could be tailored to address specific questions regarding the long-term geomorphic effects of streambed drawdowns on fluvial habitats, flood hazards, cultural resources, or downstream water quality. Future monitoring activities could focus on the relevant geomorphic processes and spatial domains within the three categories used for this study: (1) reservoir erosion and net sediment evacuation, (2) sediment delivery to downstream reaches, including magnitude and temporal pattern of sediment transport, and (3) geomorphic responses of downstream reaches to sediment delivery. Specifically, high priority future monitoring activities could include: Repeat topographic or photographic surveys in the reservoir to characterize changes occurring within individual drawdowns, to quantify sediment export, to determine temporal changes in reservoir storage, and to identify locations of erosion and deposition. Continuous, year-round turbidity monitoring supplemented with suspended-sediment measurements at a streamflow-gaging station immediately downstream from the dam to quantify sediment export. Repeat geomorphic monitoring, mapping, or modeling in downstream reaches to track changes in channel and over bank features using a combination of site- and reach-scale monitoring approaches. This could support assessments of sediment deposition and ensuing vegetation encroachment on flood hazards and habitats and examine how sediment transport and depositional processes may be affected by different sediment supply, streamflow, or dam management scenarios.

Oregon

Computing flow-field distortion coefficients from well-construction and formation properties

Direct measurements of groundwater velocity made with borehole flowmeters in screened wells must be compensated for the effects of flow-field distortion (also known as borehole acceleration). A theoretical equation developed by Drost et al. (1968) and simple inputs describing hydraulic properties of well construction and geologic formation were programmed into an Excel workbook to facilitate computation by groundwater-flowmeter users. Tables describing the physical and hydraulic properties for well constructions and gravel pack media are provided with an example to facilitate use of the workbook. Groundwater flowlines converge or diverge as they pass from a geologic formation, through a gravel pack and well screen. The extent of flowline convergence or divergence and the value of the flow-field distortion coefficient is related to the relative changes in hydraulic conductivity of the well screen, gravel pack, and geologic formation. Convergence or divergence is accompanied by acceleration or deceleration of groundwater. Direct measurements of groundwater velocity at the center of the monitoring well can be adjusted to provide a more accurate estimate of velocity in the formation by applying a correction for flow-field distortion. Variables required to compute the flow-field distortion coefficient include the hydraulic conductivity of the gravel pack, well screen, and the geologic formation surrounding the well screen; the borehole radius, and the inside radius and outside radius of the well screen.

Groundwater

Streamflow, water quality, and constituent loads and yields, Scituate Reservoir drainage area, Rhode Island, water year 2023

As part of a long-term cooperative program to monitor water quality within the Scituate Reservoir drainage area, the U.S. Geological Survey, in cooperation with Providence Water (formerly the Providence Water Supply Board), collected streamflow and water-quality data in tributaries to the Scituate Reservoir, Rhode Island. Streamflow and concentrations of chloride and sodium estimated from records of specific conductance for 16 tributaries were used to calculate loads of chloride and sodium during water year 2023 (October 1, 2022, through September 30, 2023). Water-quality samples were collected by Providence Water at 38 sampling stations on tributaries to the Scituate Reservoir during water year 2023. These water-quality data are summarized by using values of central tendency and are used, in combination with measured (or estimated) streamflows, to calculate loads and yields of selected water-quality constituents for water year 2023. Annual mean streamflows for monitoring stations in this study ranged from 0.47 to 34.4 cubic feet per second during water year 2023. At the 16 continuous-record streamgages, tributaries transported about 3,000 metric tons of chloride and 1,900 metric tons of sodium to the Scituate Reservoir; annual chloride yields for the tributaries ranged from 19 to 200 metric tons per square mile, and annual sodium yields ranged from 13 to 120 metric tons per square mile. At the stations where water-quality samples were collected by Providence Water, the medians of the median daily loads were 65,000 million colony forming units per day for coliform bacteria, 870 million colony forming units per day for Escherichia coli , 200 kilograms per day for chloride, 8.2 grams per day as nitrogen for nitrite, 520 grams per day as nitrogen for nitrate, and 300 grams per day as orthophosphate for phosphate. The medians of the median yields were 25,000 million colony forming units per day per square mile for coliform bacteria, 600 million colony forming units per day per square mile for Escherichia coli , 65 kilograms per day per square mile for chloride, 4.6 grams per day per square mile as nitrogen for nitrite, 180 grams per day per square mile as nitrogen for nitrate, and 180 grams per day per square mile as orthophosphate for phosphate.

Rhode Island

Tracking diagenetic alteration of magnetic susceptibility in thrust ridge and slope basin sediments of the Cascadia margin (ODP Sites 1249 and 1252; IODP Site U1325)

We investigated sediment core records from the Cascadia Margin (Ocean Drilling Program Sites 1249 and 1252 at Hydrate Ridge; Integrated Ocean Drilling Program Site U1325 offshore Vancouver Island) using a Zr/Rb heavy mineral proxy from X-ray fluorescence (XRF) core scanning to identify intervals of primary detrital magnetic susceptibility (κ) and predict intervals where diagenesis caused magnetite dissolution by hydrogen sulfide. We also measured total sulfur (TS) content, grain size distributions, total organic carbon (TOC) content, and the magnetic mineral assemblage to further constrain the role of diagenesis on κ. Understanding how κ can be used to better characterize the varied effects of detrital and diagenetic signals in marine settings is important for understanding biogeochemical cycling and records of paleoenvironmental change. The upper 100 m of slope basin Site 1252 contains multiple intervals (> 90 m total) of decreased κ correlated with elevated TS content, consistent with dissolution of magnetite and precipitation of pyrite, iron monosulfides, and/or elemental sulfur. Similarly at the other slope basin site, Site U1325, κ is lower and TS is elevated in the interval between 24 and 51 mbsf, due to sulfide formation. At both slope basin sites, these low κ intervals correspond with high TOC, suggesting the possibility that organoclastic sulfate reduction (OSR) is likely a major driver of diagenetic alteration of κ at these sites. High TS:TOC ratios at Site U1325 suggests anaerobic oxidation of methane (AOM) during sulfate-methane transition zone (SMTZ) migration may have contributed to alteration of κ. In contrast, within the upper 90 m of Site 1249, a methane seep site at the summit of Hydrate Ridge, κ is almost entirely altered by diagenetic processes, with much of the low κ explained by a high degree of iron sulfide formation, while some intervals are affected by precipitation of magnetic iron sulfides that maintain or even increase κ. The presence of abundant methane seepage and gas hydrate as well as chemosynthetic seafloor fauna at this site, suggests that sulfide is released to the water column and AOM, rather than OSR, drives diagenetic alteration of κ at this site. Overall, the slope basin sites show episodic variation of κ that is influenced by TOC content, likely driven by changes in marine primary productivity and sedimentation rate, while the seep site shows consistently altered κ with lower TS content and no correlation with TOC. Methane seep environments likely experience loss of hydrogen sulfide to the water column and oxidation of hydrogen sulfide by seafloor seep fauna, which limits the amount of solid phase sulfur (pyrite, iron monosulfides, elemental sulfur) that can be precipitated within the sediments. In contrast, the migration of a buried SMTZ at slope basin sites results in enhanced sulfur precipitation within the sediments. This integrated magnetic and geochemical approach reveals the diagenetic production pathway and residence time of sulfide with the sediment column ultimately controls the style and degree of diagenetic loss of κ in marine sediments. This approach works best in environments with unaltered reference intervals/sites, consistent magnetic mineralogy, and clay-to-silt grain sizes.

Cascadia margin, Pacific Ocean