USGS Science⌕ Search

SEARCH · USGS Science

Results for “Water International”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60Linked to original sources
USGS2010

Pre-eruptive storage conditions of the Holocene dacite erupted from Kizimen Volcano, Kamchatka

This study describes an investigation of the pre-eruptive conditions (T, P and fO 2 ) of dacite magma erupted during the KZI cycle (12,000-8400 years ago) of Kizimen Volcano, Kamchatka, the earliest, most voluminous and most explosive eruption cycle in the Kizimen record. Hydrothermal, water-saturated experiments on KZI dacite pumice coupled with titanomagnetite-ilmenite geothermometry calculations require that the KZI dacite existed at a temperature of 823 ?? 20??C and pressures of 125-150 MPa immediately prior to eruption. This estimate corresponds to a lithologic contact between Miocene volcaniclastic rocks and Pliocene-Pleistocene volcanic rocks located at a depth of 5-6 km beneath the Kizimen edifice, which may have facilitated the accumulation of atypically large volumes of gas-rich dacite during the KZI cycle.

International Geology Review↗
USGS1990

Partitioning and bioavailability of mercury in an experimentally acidified Wisconsin lake

We studied the partitioning of mercury (Hg) among air, water, sediments and fish at Little Rock Lake, a clear water seepage lake in north-central Wisconsin. The lake was divided with a sea curtain into two basins, one acidified with sulfuric acid to pH 5.6 for two years and the other an untreated reference site (mean pH 6.1), to document the effects of acidification. Trace-metal-free protocols were used to measure Hg at the picomolar level in air and water. Total gaseous Hg in air samples averaged 2.0 ng/m 3 . Total Hg in unfiltered water samples collected in 1986 after the fall overturn averaged about 1 ng/L in the acidified and reference basins. Mercury in surficial sediments was strongly correlated with volatile matter content and ranged from 10 to about 170 ng/g (dry weight) in both basins. Total Hg concentrations in whole, calendar age-1 yellow perch ( Perca flavescens ), sampled after one year of residence in the lake, averaged 114 ng/g (fresh weight) in the reference basin and 135 ng/g in the acidified basin – a highly significant ( p < 0.01) difference. The mean whole-body burden (quantity) of Hg in age-1 perch did not differ between basins after the first year, but was significantly greater in the treatment basin than in the reference basin after the second year of acidification. Differences between the two basins in the bioaccumulation of Hg were attributed to internal (within-lake) processes that influence the bioavailability of the metal. An initial Hg budget for the treatment basin of Little Rock Lake showed that atmospheric deposition and sedimentary remobilization of Hg are potentially important processes influencing its biogeochemical cycling and uptake by fish.

Wisconsin↗
USGS2011

Surface complexation modeling for predicting solid phase arsenic concentrations in the sediments of the Mississippi River Valley alluvial aquifer, Arkansas, USA

The potential health impact of As in drinking water supply systems in the Mississippi River Valley alluvial aquifer in the state of Arkansas, USA is significant. In this context it is important to understand the occurrence, distribution and mobilization of As in the Mississippi River Valley alluvial aquifer. Application of surface complexation models (SCMs) to predict the sorption behavior of As and hydrous Fe oxides (HFO) in the laboratory has increased in the last decade. However, the application of SCMs to predict the sorption of As in natural sediments has not often been reported, and such applications are greatly constrained by the lack of site-specific model parameters. Attempts have been made to use SCMs considering a component additivity (CA) approach which accounts for relative abundances of pure phases in natural sediments, followed by the addition of SCM parameters individually for each phase. Although few reliable and internally consistent sorption databases related to HFO exist, the use of SCMs using laboratory-derived sorption databases to predict the mobility of As in natural sediments has increased. This study is an attempt to evaluate the ability of the SCMs using the geochemical code PHREEQC to predict solid phase As in the sediments of the Mississippi River Valley alluvial aquifer in Arkansas. The SCM option of the double-layer model (DLM) was simulated using ferrihydrite and goethite as sorbents quantified from chemical extractions, calculated surface-site densities, published surface properties, and published laboratory-derived sorption constants for the sorbents. The model results are satisfactory for shallow wells (10.6 m below ground surface), where the redox condition is relatively oxic or mildly suboxic. However, for the deep alluvial aquifer (21–36.6 m below ground surface) where the redox condition is suboxic to anoxic, the model results are unsatisfactory.

Arkansas↗
USGS2008

Mycobacteriosis in striped bass

Mycobacteriosis is a bacterial disease in which striped bass (rockfish) may be disfigured as a result of skin ulcers and internal lesions. The bass may also be skinny or in extremely poor condition due to the chronic nature of this wasting disease. Stripers are a highly prized target species for both recreational anglers and commercial fishermen. As such, the economic impact of diseased and devalued fish could be significant. In addition, some of the mycobacteria that commonly infect fishes can cause infections in people and therefore are a human health concern. The total extent to which the disease is occurring along the Eastern seaboard is unknown but the disease has been reported from stripers taken from North Carolina to New York. During 1998-99, skin ulcers attributed to mycobacterial infection were observed in up to 28% of the striped bass from some Virginia tributaries of the Chesapeake Bay. Data obtained during 2002—2003 from fish harvested in Virginia and Maryland waters indicated that, at least in some areas, over 80% of striped bass may be infected with the mycobacteria that are associated with the disease. Given the persistence over the last 8 years of this mycobacteriosis outbreak, this does not appear to be a short-term problem.

Fact Sheet↗
USGS2020

Hydrodynamics drive pelagic communities and food web structure in a tidal environment

Hydrodynamic processes can lead to the accumulation and/or dispersal of water column constituents, including sediment, phytoplankton, and particulate detritus. Using a combination of field observations and stable isotope tracing tools, we identified how hydrodynamic processes influenced physical habitat, pelagic communities, and food web structure in a freshwater tidal system. The pelagic habitat of a terminal channel differed spatially, likely aligning with differences in hydrodynamics. Three zones that we classified by exchange with downstream habitat had distinct water quality characteristics, supported different densities of zooplankton and nekton, and exhibited disparate support from benthic and pelagic trophic pathways to pelagic consumers. Hydrodynamically driven zones and their emergent characteristics appeared sensitive to hydrology, as elevated runoff was correlated with a shift in hydrodynamic habitat and organismal distributions. The results of our study highlight the relationship between hydrodynamic processes, biological responses, and climate, and suggest that understanding the physical process can improve understanding of pelagic habitats and communities.

California↗
USGS2021

Pilot-scale expanded assessment of inorganic and organic tapwater exposures and predicted effects in Puerto Rico, USA

A pilot-scale expanded target assessment of mixtures of inorganic and organic contaminants in point-of-consumption drinking water (tapwater, TW) was conducted in Puerto Rico (PR) to continue to inform TW exposures and corresponding estimations of cumulative human-health risks across the US. In August 2018, a spatial synoptic pilot assessment of than 524 organic, 37 inorganic, and select microbiological contaminant indicators was conducted in 14 locations (7 home; 7 commercial) across PR. A follow-up 3-day temporal assessment of TW variability was conducted in December 2018 at two of the synoptic locations (1 home, 1 commercial) and included daily pre- and post-flush samples. Concentrations of regulated and unregulated TW contaminants were used to calculate cumulative in vitro bioactivity ratios and Hazard Indices (HI) based on existing human-health benchmarks. Synoptic results confirmed that human exposures to inorganic and organic contaminant mixtures, which are rarely monitored together in drinking water at the point of consumption, occurred across PR and consisted of elevated concentrations of inorganic contaminants (e.g., lead, copper), disinfection byproducts (DBP), and to a lesser extent per/polyfluoroalkyl substances (PFAS) and phthalates. Exceedances of human-health benchmarks in every synoptic TW sample support further investigation of the potential cumulative risk to vulnerable populations in PR and emphasize the importance of continued broad characterization of drinking-water exposures at the tap with analytical capabilities that better represent the complexity of both inorganic and organic contaminant mixtures known to occur in ambient source waters. Such health-based monitoring data are essential to support public engagement in source water sustainability and treatment and to inform consumer point-of-use treatment decision making in PR and throughout the US.

Puerto Rico↗
USGS2002

Flood-hazard mapping in Honduras in response to Hurricane Mitch

The devastation in Honduras due to flooding from Hurricane Mitch in 1998 prompted the U.S. Agency for International Development, through the U.S. Geological Survey, to develop a country-wide systematic approach of flood-hazard mapping and a demonstration of the method at selected sites as part of a reconstruction effort. The design discharge chosen for flood-hazard mapping was the flood with an average return interval of 50 years, and this selection was based on discussions with the U.S. Agency for International Development and the Honduran Public Works and Transportation Ministry. A regression equation for estimating the 50-year flood discharge using drainage area and annual precipitation as the explanatory variables was developed, based on data from 34 long-term gaging sites. This equation, which has a standard error of prediction of 71.3 percent, was used in a geographic information system to estimate the 50-year flood discharge at any location for any river in the country. The flood-hazard mapping method was demonstrated at 15 selected municipalities. High-resolution digital-elevation models of the floodplain were obtained using an airborne laser-terrain mapping system. Field verification of the digital elevation models showed that the digital-elevation models had mean absolute errors ranging from -0.57 to 0.14 meter in the vertical dimension. From these models, water-surface elevation cross sections were obtained and used in a numerical, one-dimensional, steady-flow stepbackwater model to estimate water-surface profiles corresponding to the 50-year flood discharge. From these water-surface profiles, maps of area and depth of inundation were created at the 13 of the 15 selected municipalities. At La Lima only, the area and depth of inundation of the channel capacity in the city was mapped. At Santa Rose de Aguan, no numerical model was created. The 50-year flood and the maps of area and depth of inundation are based on the estimated 50-year storm tide.

Water-Resources Investigations Report↗
USGS2020

Soil moisture product validation good practices protocol, version 1.0

The Global Climate Observing System (GCOS) included soil moisture in the list of Essential Climate Variables (ECVs) to express its important role in Earth’s water, energy and carbon cycle. Soil moisture has a major impact on agriculture, land surface hydrology, weather, and climate forecasting. This document is a community-based effort to provide recommendations on good practices for the validation of global to regional soil moisture products. Definitions are given and metrics to adequately describe the quality of soil moisture products are presented. Spaceborne active and passive microwave sensors are listed with their characteristics, and the typical soil moisture retrieval methods are explained, including dielectric mixing models and optical methods. Spatial scaling, root zone soil moisture estimation, and operational implementations are addressed, as these issues continue to gain more and more importance. Standard and advanced in situ measurement techniques are described as well as sensor calibration, spatial representativity, sampling strategies, and the benefit of airborne campaigns.The community has agreed upon the utilization of the International Soil Moisture Network (ISMN) as the main online repository for in situ soil moisture measurements. Different validation methods such as ground-based validation, satellite product intercomparison, and time series analyses are presented. We provide strategies to evaluate the long-term quality of soil moisture products, and give advice on how to handle typical temporal and spatial-scale mismatches and how to effectively report validation results. Moreover, the benefit of blind tests is discussed to gain objective validation results. We encourage data providers, scientists and practitioners to use this Soil Moisture Product Validation Good Practices Protocol to provide, analyze, and improve high quality Earth Observation results.

Report↗
USGS2015

Chesapeake Bay impact structure: A blast from the past

About 35 million years ago, a 2-mile-wide meteorite smashed into Earth in what is now the lower Chesapeake Bay in Virginia. The oceanic impact vaporized, melted, fractured, and displaced rocks and sediments and sent billions of tons of water, sediments, and rocks into the air. Glassy particles of solidified melt rock rained down as far away as Texas and the Caribbean. Large tsunamis affected most of the North Atlantic basin. The resulting impact structure is more than 53 miles wide and has a 23-mile-wide, filled central crater surrounded by collapsed sediments. Now buried by hundreds of feet of younger sediments, the Chesapeake Bay impact structure is among the 20 largest known impact structures on Earth. Since its discovery in the early 1990s, scientists have conducted deep drilling and geophysical surveys of the impact structure to find out more about its size, composition, structure, age, and biological effects and to understand its lingering influences on the regional groundwater system. These efforts culminated in the drilling of a 1-mile-deep, continuously sampled corehole in 2005 by an international group of scientists and agencies.

Chesapeake Bay↗
USGS1998

Developmental geology of coalbed methane from shallow to deep in Rocky Mountain basins and in Cook Inlet-Matanuska Basin, Alaska, USA and Canada

The Rocky Mountain basins of western North America contain vast deposits of coal of Cretaceous through early Tertiary age. Coalbed methane is produced in Rocky Mountain basins at depths ranging from 45 m (150 ft) to 1981 m (6500 ft) from coal of lignite to low-volatile bituminous rank. Although some production has been established in almost all Rocky Mountain basins, commercial production occurs in only a few. despite more than two decades of exploration for coalbed methane in the Rocky Mountain region, it is still difficult to predict production characteristics of coalbed methane wells prior to drilling. Commonly cited problems include low permeabilities, high water production, and coals that are significantly undersaturated with respect to methane. Sources of coalbed gases can be early biogenic, formed during the early stages of coalification, thermogenic, formed during the main stages of coalification, or late stage biogenic, formed as a result of the reintroduction of methane-gnerating bacteria by groundwater after uplift and erosion. Examples of all three types of coalbed gases, and combinations of more than one type, can be found in the Rocky Mountain region. Coals in the Rocky Mountain region achieved their present ranks largely as a result of burial beneath sediments that accumulated during the Laramide orogeny (Late Cretaceous through the end of the eocene) or shortly after. Thermal events since the end of the orogeny have also locally elevated coal ranks. Coal beds in the upper part of high-volatile A bituminous rank or greater commonly occur within much more extensive basin-centered gas deposits which cover large areas of the deeper parts of most Rocky Mountain basins. Within these basin-centered deposits all lithologies, including coals, sandstones, and shales, are gas saturated, and very little water is produced. The interbedded coals and carbonaceous shales are probably the source of much of this gas. Basin-centered gas deposits become overpressured from hydrocarbon generation as they form, and this overpressuring is probably responsible for driving out most of the water. Sandstone permeabilities are low, in part because of diagenesis caused by highly reactive water given off during the early stages of coalification. Coals within these basin-centered deposits commonly have high gas contents and produce little water, but they generally occur at depths greater than 5000 ft and have low permeabilities. Significant uplift and removal of overburden has occurred throughout the Rocky Mountain region since the end of the Eocene, and much of this erosion occurred after regional uplift began about 10 Ma. The removal of overburden generally causes methane saturation levels in coals to decrease, and thus a significant drop in pressure is required to initiate methane production. The most successful coalbed methane production in the Rocky Mountain region occurs in areas where gas contents were increased by post-Eocene thermal events and/or the generation of late-stage biogenic gas. Methane-generating bacteria were apparently reintroduced into the coals in some areas after uplift and erosion, and subsequent changes in pressure and temperature, allowed surface waters to rewater the coals. Groundwater may also help open up cleat systems making coals more permeable to methane. If water production is excessive, however, the economics of producing methane are impacted by the cost of water disposal.The Rocky Mountain basins of western North America contain vast deposits of coal of Cretaceous through early Tertiary age. Coalbed methane is produced in Rocky Mountain basins at depths ranging from 45 to 1981 m from coal of lignite to low volatile bituminous rank. Despite more than two decades of exploration for coalbed methane in Rocky Mountain region, it is still difficult to predict production characteristics of coalbed methane wells prior to drilling. Sources of coalbed gases can be early biogenic, formed during the main stages of coa

International Journal of Coal Geology↗
USGS2003

The U.S. Geological Survey Land Remote Sensing Program

In 2002, the U. S. Geological Survey (USGS) launched a program to enhance the acquisition, preservation, and use of remotely sensed data for USGS science programs, as well as for those of cooperators and customers. Remotely sensed data are fundamental tools for studying the Earth's land surface, including coastal and near-shore environments. For many decades, the USGS has been a leader in providing remotely sensed data to the national and international communities. Acting on its historical topographic mapping mission, the USGS has archived and distributed aerial photographs of the United States for more than half a century. Since 1972, the USGS has acquired, processed, archived, and distributed Landsat and other satellite and airborne remotely sensed data products to users worldwide. Today, the USGS operates and manages the Landsats 5 and 7 missions and cooperates with the National Aeronautics and Space Administration (NASA) to define and implement future satellite missions that will continue and expand the collection of moderate-resolution remotely sensed data. In addition to being a provider of remotely sensed data, the USGS is a user of these data and related remote sensing technology. These data are used in natural resource evaluations for energy and minerals, coastal environmental surveys, assessments of natural hazards (earthquakes, volcanoes, and landslides), biological surveys and investigations, water resources status and trends analyses and studies, and geographic and cartographic applications, such as wildfire detection and tracking and as a source of information for The National Map. The program furthers these distinct but related roles by leading the USGS activities in providing remotely sensed data while advancing applications of such data for USGS programs and a wider user community.

Fact Sheet↗
USGS2017

Mineral-deposit model for lithium-cesium-tantalum pegmatites

Lithium-cesium-tantalum (LCT) pegmatites comprise a compositionally defined subset of granitic pegmatites. The major minerals are quartz, potassium feldspar, albite, and muscovite; typical accessory minerals include biotite, garnet, tourmaline, and apatite. The principal lithium ore minerals are spodumene, petalite, and lepidolite; cesium mostly comes from pollucite; and tantalum mostly comes from columbite-tantalite. Tin ore as cassiterite and beryllium ore as beryl also occur in LCT pegmatites, as do a number of gemstones and high-value museum specimens of rare minerals. Individual crystals in LCT pegmatites can be enormous: the largest spodumene was 14 meters long, the largest beryl was 18 meters long, and the largest potassium feldspar was 49 meters long. Lithium-cesium-tantalum pegmatites account for about one-fourth of the world’s lithium production, most of the tantalum production, and all of the cesium production. Giant deposits include Tanco in Canada, Greenbushes in Australia, and Bikita in Zimbabwe. The largest lithium pegmatite in the United States, at King’s Mountain, North Carolina, is no longer being mined although large reserves of lithium remain. Depending on size and attitude of the pegmatite, a variety of mining techniques are used, including artisanal surface mining, open-pit surface mining, small underground workings, and large underground operations using room-and-pillar design. In favorable circumstances, what would otherwise be gangue minerals (quartz, potassium feldspar, albite, and muscovite) can be mined along with lithium and (or) tantalum as coproducts. Most LCT pegmatites are hosted in metamorphosed supracrustal rocks in the upper greenschist to lower amphibolite facies. Lithium-cesium-tantalum pegmatite intrusions generally are emplaced late during orogeny, with emplacement being controlled by pre-existing structures. Typically, they crop out near evolved, peraluminous granites and leucogranites from which they are inferred to be derived by fractional crystallization. In cases where a parental granite pluton is not exposed, one is inferred to lie at depth. Lithium-cesium-tantalum LCT pegmatite melts are enriched in fluxing components including H2O, F, P, and B, which depress the solidus temperature, lower the density, and increase rates of ionic diffusion. This, in turn, enables pegmatites to form thin dikes and massive crystals despite having a felsic composition and temperatures that are significantly lower than ordinary granitic melts. Lithium-cesium-tantalum pegmatites crystallized at remarkably low temperatures (about 350–550 °C) in a remarkably short time (days to years). Lithium-cesium-tantalum pegmatites form in orogenic hinterlands as products of plate convergence. Most formed during collisional orogeny (for example, Kings Mountain district, North Carolina). Specific causes of LCT pegmatite-related magmatism could include: ordinary arc processes; over thickening of continental crust during collision or subduction; slab breakoff during or after collision; slab delamination before, during, or after collision; and late collisional extensional collapse and consequent decompression melting. Lithium-cesium-tantalum pegmatite deposits are present in all continents including Antarctica and in rocks spanning 3 billion years of Earth history. The global age distribution of LCT pegmatites is similar to those of common pegmatites, orogenic granites, and detrital zircons. Peak times of LCT pegmatite genesis at about 2640, 1800, 960, 485, and 310 Ma (million years before present) correspond to times of collisional orogeny and supercontinent assembly. Between these pulses were long intervals when few or no LCT pegmatites formed. These minima overlap with supercontinent tenures at ca. 2450–2225, 1625–1000, 875–725, and 250–200 Ma. Exploration and assessment for LCT pegmatites are guided by a number of observations. In frontier areas where exploration has been minimal at best, the key first-order criteria are an orogenic hinterland setting, appropriate regional metamorphic grades, and the presence of evolved granites and common granitic pegmatites. New LCT pegmatites are most likely to be found near known deposits. Pegmatites tend to show a regional mineralogical and geochemical zoning pattern with respect to the inferred parental granite, with the greatest enrichment in the more distal pegmatites. Mineral-chemical trends in common pegmatites that can point toward an evolved LCT pegmatite include: increasing rubidium in potassium feldspar, increasing lithium in white mica, increasing manganese in garnet, and increasing tantalum and manganese in columbite-tantalite. Most LCT pegmatite bodies show a distinctive internal zonation featuring four zones: border, wall, intermediate (where lithium, cesium, and tantalum are generally concentrated), and core. This zonation is expressed both in cross section and map view; thus, what may appear to be a common pegmatite may instead be the edge of a mineralized body. Neither lithium-cesium-tantalum pegmatites nor their parental granites are likely to cause serious environmental concerns. Soils and country rock surrounding a LCT pegmatite, as well as waste from mining operations, may be enriched in characteristic elements relative to global average soil and bedrock values. These elements may include lithium, cesium, tantalum, beryllium, boron, fluorine, phosphorus, manganese, gallium, rubidium, niobium, tin, and hafnium. Among this suite of elements, however, the only ones that might present a concern for environmental health are beryllium and fluorine, which are included in the U.S. Environmental Protection Agency drinking-water regulations with maximum contaminant levels of 4 micrograms per liter and 4 milligrams per liter, respectively.

Scientific Investigations Report↗
USGS2022

Hydrologic and landscape controls on dissolved organic matter composition across western North American Arctic lakes

Northern high-latitude lakes are hotspots for cycling dissolved organic carbon (DOC) inputs from allochthonous sources to the atmosphere. However, the spatial distribution of lake dissolved organic matter (DOM) is largely unknown across Arctic-boreal regions with respect to the surrounding landscape. We expand on regional studies of northern high-latitude DOM composition by integrating DOC concentrations, optical properties, and molecular-level characterization from lakes spanning the Canadian Taiga to the Alaskan Tundra. Lakes were sampled during the summer from July to early September to capture the growing season. DOM became more optically processed and molecular-level aromaticity increased northward across the Canadian Shield to the southern Arctic and from interior Alaska to the Tundra, suggesting relatively greater DOM incorporation from allochthonous sources. Using water isotopes (δ 18 O-H 2 O), we report a weak overall trend of increasing DOC and decreasing aromaticity in lakes that were hydrologically isolated from the landscape and enriched in δ 18 O-H 2 O, while within-region trends were stronger and varied depending on the landscape. Finally, DOC correlated weakly with chromophoric dissolved organic matter (CDOM) across the study sites, suggesting that autochthonous and photobleached DOM were a major component of the DOC in these regions; however, some of the northernmost and wetland-dominated lakes followed pan-Arctic riverine DOC-CDOM relationships, indicating strong contributions from allochthonous inputs. As many lakes across the North American Arctic are experiencing changes in temperature and precipitation, we expect the proportions of allochthonous and autochthonous DOM to respond with aquatic optical browning with greater landscape connectivity and more internally produced DOM in hydrologically isolated lakes.

Global Biogeochemical Cycles↗
USGS2010

Detecting the spatial and temporal variability of chlorophyll-a concentration and total suspended solids in Apalachicola Bay, Florida using MODIS imagery

Apalachicola Bay, Florida, accounts for 90% of Florida's and 10% of the nation's eastern oyster ( Crassostrea virginica ) harvesting. Chlorophyll- a concentration and total suspended solids (TSS) are two important water quality variables, among other environmental factors such as salinity, for eastern oyster production in Apalachicola Bay. In this research, we developed regression models of the relationships between the reflectance of the Moderate-Resolution Imaging Spectroradiometer (MODIS) Terra 250 m data and the two water quality variables based on the Bay-wide field data collected during 14–17 October 2002, a relatively dry period, and 3–5 April 2006, a relatively wet period, respectively. Then we selected the best regression models (highest coefficient of determination, R 2 ) to derive Bay-wide maps of chlorophyll- a concentration and TSS for the two periods. The MODIS-derived maps revealed large spatial and temporal variations in chlorophyll- a concentration and TSS across the entire Apalachicola Bay.

Florida↗
USGS2007

International Polar Year (IPY), 2007-2008

The International Polar Year is an intense scientific campaign to explore new frontiers in polar science, improve our understanding of the critical role of the polar regions in global processes, engage the public in polar discovery, and help attract the next generation of earth scientists. Participation in the IPY allows the USGS to celebrate this enduring tradition with the rest of the global polar research community and to renew our commitment to polar science at a time when the world is focused on the extraordinary changes happening in these regions.

General Information Product↗
USGS1978

A sediment-dispersal model for the South Texas continental shelf, northwest Gulf of Mexico

Textural-distribution patterns of sea-floor sediments on the South Texas continental shelf between Matagorda Bay and the U.S.-Mexico international boundary were evaluated as part of a regional environmental-studies program. Sediment textural gradients support a conceptual model for the regional sediment-dispersal system, which is characterized by both net offshore transport and net south-trending coastwise transport components on a wind-dominated shelf. Coastwise transport results in the net southward migration of both palimpsest sandy mud composing the ancestral Brazos-Colorado delta flank in the northern sector, and modern mud composing the central sector; these migrating sediments are encroaching southward onto immobile relict muddy sands composing the ancestral Rio Grande delta in the southern sector. In the proposed model, the suspension transport of modern silt-enriched mud derived mainly from coastal sources is the dominant dispersal mechanism. Net offshore transport is attributed both to diffusion, and to the advective ebb-tide discharge of turbid lagoonal-estuarine waters from coastal inlets. Net southward transport is attributed mainly to advection by seasonally residual coastwise drift currents reflecting a winter-dominated hydraulic regime. Frequent winter storms characterized by relatively high-speed northerly winds that accompany the passage of cold fronts appear to be dominant regional dispersal agents.

Texas↗
USGS2000

Analyzing slug tests in wells screened across the watertable: A field assessment

The slug test is the most widely used technique for the in situ estimation of hydraulic conductivity in confined and unconfined formations. Currently, there are no generally accepted methods in the groundwater literature for the analysis of response data from slug tests performed in wells screened across the watertable. A field study was undertaken in an attempt to develop a set of practical guidelines for tests conducted in such wells. Three wells, screened within unconsolidated material exhibiting a range of hydraulic conductivities (.05-30.0 m/day), were installed to depths of up to 9 m (30 ft) in Kansas River alluvium that ranges in thickness from 15 m to 21 m (50 ft to 70 ft) near Lawrence, Kansas. Intensive well-development efforts removed any drilling debris that could interfere with well-formation hydraulics. Once the wells were developed properly, a series of slug tests was performed at each well. The tests were designed to assess the role of the unsaturated zone and the appropriateness of assuming a fixed hydraulic head upper boundary. The results of this investigation can be summarized as follows: (1) the sufficiency of well development should be based on repeat slug tests and not the clarity of pumped water; (2) the effective screen radius for best model analysis should be based on a mass balance and not nominal screen dimensions; (3) the watertable can be represented as a constant head boundary and flow in the unsaturated zone can be ignored in most situations; (4) conventional techniques for the analysis of slug-test data seem to be reasonable for slug tests conducted in wells screened across the watertable, when used with the appropriate effective screen radius and normalized head range; and (5) fluctuations in the watertable elevation through time can be exploited to obtain some insight into the nature of vertical variation in hydraulic conductivity at a well. The results of this investigation indicate that multiple slug tests should be performed at wells screened across the watertable in order to reliably assess the sufficiency of well development and the appropriateness of conventional theory. ?? 2000 International Association for Mathematical Geology.

Natural Resources Research↗
USGS2021

DLR Earth Sensing Imaging Spectrometer (DESIS) level 1 product evaluation using RadCalNet measurements

The DLR Earth Sensing Imaging Spectrometer (DESIS) is the first hyperspectral imaging spectrometer installed in the Multi-User System for Earth Sensing (MUSES) on the International Space Station (ISS) for acquiring routine science grade images from orbit. It was launched on 29 June 2018 and integrated into MUSES. DESIS measures energy in the spectral range of 400 to 1000 nm with high spatial and spectral resolution: 30 m and 2.55 nm, respectively. DESIS data should be sufficiently quantitative and accurate to use it for different applications and research. This work performs a radiometric evaluation of DESIS Level 1 product (Top of Atmosphere (TOA) reflectance) by comparing it with coincident Radiometric Calibration Network (RadCalNet) measurements at Railroad Valley Playa (RVUS), Gobabeb (GONA), and La Crau (LCFR). RVUS, GONA, and LCFR offer 4, 15, and 5 coincident datasets between DESIS and RadCalNet measurements, respectively. The results show an agreement between DESIS and RadCalNet TOA reflectance within ~5% for most spectral regions. However, there is an additional ~5% disagreement across the wavelengths affected by water vapor absorption and atmospheric scattering. Among the three RadCalNet sites, RVUS and GONA show a similar measurement disagreement with DESIS of ~5%, while LCFR differs by ~10%. Agreement between DESIS and RadCalNet measurements is variable across all three sites, likely due to surface type differences. DESIS and RadCalNet agreement show a precision of ~2.5%, 4%, and 7% at RVUS, GONA, and LCFR, respectively. RVUS and GONA, which have a similar surface type, sand, have a similar level of radiometric accuracy and precision, whereas LCFR, which consists of sparse vegetation, has lower accuracy and precision. The observed precision of DESIS Level 1 products from all the sites, especially LCFR, can be improved with a better Bidirectional Reflection Distribution Function (BRDF) characterization of the RadCalNet sites.

Remote Sensing↗