USGS Science⌕ Search

SEARCH · USGS Science

Results for “Special Study”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60Linked to original sources

Response of breeding birds to aerial sprays of trichlorfon (Dylox) and carbaryl (Sevin-4-Oil) in Montana forests

Breeding density, food, nesting success, and mortality of 20 bird species were monitored at Beaverhead National Forest, Montana, in 1975 in conjunction with experimental applications of trichlorfon (Dylox) and carbaryl (Sevin-4-oil) to western budworms (Choristoneura occidentalis). Bird species on nine 350- to 550-ha forested plots (three controls and three treated with each pesticide) were studied before and for 14 days after the spraying of trichlorfon at 1.1 kg in?9.4 L of Panasol AN3 per ha (1 pound active ingredient in 1.0 gallon/acre) and of carbaryl at 1.1 kg in 4.7 L of diesel oil per ha (l pound active ingredient in 0.5 gallon/acre). No significant decrease in bird numbers was detected from breeding-pair estimates or live bird counts after the spraying. Of the breeding pairs present before spraying, 92% remained on control plots, 89% on trichlorfon plots, and 92% on carbaryl plots. Counts of live birds made before and after spraying in three types of habitat supported the. results of the breeding-pair estimates. Nests with eggs or with young at the time of spraying were 74 and 97% successful, respectively, in control plots, 83 and 100% in plots sprayed with trichlorfon, and 86 and 100% in plots sprayed with carbaryl. No sick or dead birds were found after the spraying, although budworms were found in bird stomachs, and tracer-dye from the pesticide occurred on the feathers or feet of 74% of the 202 birds collected. Species dwelling in the tree canopy encountered the dye (and thus the pesticide) at a slightly higher rate (80%) than did species below the treetops (71 %) or near the ground and in open areas (70%).

Special Scientific Report - Wildlife↗

Geologic framework and evidence for neotectonism in the epicentral area of the 2011 Mineral, Virginia, earthquake

The epicenters of the main shock and associated aftershocks of the 2011 moment magnitude, M w 5.8 Mineral, Virginia (USA), earthquake, and the updip projection of the possible fault plane that triggered the quakes, are contained in the areas of 2 adjoining 7.5′ quadrangles in the central Virginia Piedmont. These quadrangles have therefore been the focus of concentrated geologic study in the form of bedrock and surficial mapping and near-surface trenching in order to identify potential seismogenic structures. Bedrock mapping has outlined a series of northeast-southwest–trending lithologic belts that include the Ordovician Chopawamsic and Quantico Formations, the narrow neck of the Late Ordovician Ellisville pluton, and mélange zone III of the Mine Run Complex. The region was affected by at least two ductile deformational events, one in the early Paleozoic that was broadly synchronous with the intrusion of the pluton, and one later in the Paleozoic. The earlier deformation produced the Quantico synclinorium and other regional folds, and the later deformation produced faults with associated high-strain zones. Two of these faults have been trenched at their intersection along the east-dipping eastern contact of the Ellisville neck, near where the causative fault for the earthquake projects to the surface. The trenches have exposed abundant evidence of post-Paleozoic fracturing and faulting, including brecciated quartz-tourmaline veins, slickensided thrust and strike-slip faults, and clay-filled fractures. Fluvial and colluvial gravels that overlie these brittle structures have yielded optically stimulated luminescence ages ranging from ca. 27 to 10 ka. These structures are likely representative of surface features associated with Quaternary earthquakes in the Central Virginia seismic zone.

GSA Special Papers↗

Authigenic potassium feldspar: A tracer for the timing of palaeofluid flow in carbonate rocks, Northern Calcareous Alps, Austria

Feldspar is a common authigenic constituent in Permian carbonate rocks which occur as tectonically isolated blocks within the evaporitic Haselgebirge mélange in the Northern Calcareous Alps (NCA). Coexisting with pyrite, anhydrite, (saddle) dolomite, magnesite, fluorite and calcite, K-feldspar and minor albite record an event of regionally extensive interaction of hot brines with carbonate rocks. Detailed petrographic, crystallographic and geochemical studies reveal a variability in crystal size and shape, Al-Si ordering, elemental and stable isotopic compositions of the K-feldspar, which is only partially consistent with the traditional view of authigenic feldspar as a well-ordered, compositionally pure mineral. 40 Ar- 39 Ar step-heating measurements of authigenic potassium feldspar from several localities yield two age populations, an older one of 145–154 Ma, and a younger one of c. 90–97 Ma. Most age spectra reflect cooling through the argon retention temperature interval, which was rapid in some localities (as indicated by plateau ages) and slower in others. Rb-Sr isotope data are more difficult to interpret, because in many K-feldspar samples they are controlled largely by Sr-bearing inclusions. The Jurassic 40 Ar- 39 Ar dates are interpreted as minimum ages of feldspar growth and hence imply that fluid-rock interaction is likely to be simultaneous with or to slightly predate mélange formation. Deformation associated with the closure and subduction of the Meliata-Hallstatt ocean south of the NCA during the Upper Jurassic is regarded as the principal geodynamic driving force for both enhanced fluid circulation and mélange formation. Some localities were reheated beyond the argon retention temperature for microcline during mid-Cretaceous nappe stacking of the NCA, thus obliterating the older signal.

Geological Society Special Publication↗

The 2011 Virginia M5.8 earthquake: Insights from seismic reflection imaging into the influence of older structures on eastern U.S. seismicity

The Mineral, Virginia (USA), earthquake of 23 August 2011 occurred at 6– 8 km depth within the allochthonous terranes of the Appalachian Piedmont Province, rupturing an ~N36°E striking reverse fault dipping ~50° southeast. This study used the Interstate Highway 64 seismic refl ection profi le acquired ~6 km southwest of the hypocenter to examine the structural setting of the earthquake. The profi le shows that the 2011 earthquake and its aftershocks are almost entirely within the early Paleozoic Chopawamsic volcanic arc terrane, which is bounded by listric thrust faults dipping 30°–40° southeast that sole out into an ~2-km-thick, strongly refl ective zone at 7– 12 km depth. Refl ectors above and below the southward projection of the 2011 earthquake focal plane do not show evidence for large displacement, and the updip projection of the fault plane does not match either the location or trend of a previously mapped fault or lithologic boundary. The 2011 earthquake thus does not appear to be a simple reactivation of a known Paleozoic thrust fault or a major Mesozoic rift basin-boundary fault. The fault that ruptured appears to be a new fault, a fault with only minor displacement, or to not extend the ~3 km from the aftershock zone to the seismic profi le. Although the Paleozoic structures appear to infl uence the general distribution of seismicity in the area, Central Virginia seismic zone earthquakes have yet to be tied directly to specifi c fault systems mapped at the surface or imaged on seismic profiles.

Virginia↗

Earthquake location in island arcs

A comprehensive data set of selected teleseismic P-wave arrivals and local-network P- and S-wave arrivals from large earthquakes occurring at all depths within a small section of the central Aleutians is used to examine the general problem of earthquake location in island arcs. Reference hypocenters for this special data set are determined for shallow earthquakes from local-network data and for deep earthquakes from combined local and teleseismic data by joint inversion for structure and location. The high-velocity lithospheric slab beneath the central Aleutians may displace hypocenters that are located using spherically symmetric Earth models; the amount of displacement depends on the position of the earthquakes with respect to the slab and on whether local or teleseismic data are used to locate the earthquakes. Hypocenters for trench and intermediate-depth events appear to be minimally biased by the effects of slab structure on rays to teleseismic stations. However, locations of intermediate-depth events based on only local data are systematically displaced southwards, the magnitude of the displacement being proportional to depth. Shallow-focus events along the main thrust zone, although well located using only local-network data, are severely shifted northwards and deeper, with displacements as large as 50 km, by slab effects on teleseismic travel times. Hypocenters determined by a method that utilizes seismic ray tracing through a three-dimensional velocity model of the subduction zone, derived by thermal modeling, are compared to results obtained by the method of joint hypocenter determination (JHD) that formally assumes a laterally homogeneous velocity model over the source region and treats all raypath anomalies as constant station corrections to the travel-time curve. The ray-tracing method has the theoretical advantage that it accounts for variations in travel-time anomalies within a group of events distributed over a sizable region of a dipping, high-velocity lithospheric slab. In application, JHD has the practical advantage that it does not require the specification of a theoretical velocity model for the slab. Considering earthquakes within a 260 km long by 60 km wide section of the Aleutian main thrust zone, our results suggest that the theoretical velocity structure of the slab is presently not sufficiently well known that accurate locations can be obtained independently of locally recorded data. Using a locally recorded earthquake as a calibration event, JHD gave excellent results over the entire section of the main thrust zone here studied, without showing a strong effect that might be attributed to spatially varying source-station anomalies. We also calibrated the ray-tracing method using locally recorded data and obtained results generally similar to those obtained by JHD. ?? 1982.

Physics of the Earth and Planetary Interiors↗

Environment of deposition of CaCO3 in Elk Lake, Minnesota

Elk Lake is near the present forest-prairie border in northwestern Minnesota, and is also located on the boundary between hard-water lakes that are typical of once-glaciated parts of the north-central United States and more saline prairie lakes of western Minnesota and the Dakotas. The sediments of the prairie lakes just west of Elk Lake are unusual in that they commonly contain high-Mg calcite and dolomite in addition to low-Mg calcite, which is the dominant carbonate mineral in most marl lakes. During the mid-Holocene dry period, prairie conditions expanded eastward into the forested regions of Minnesota. Variations in types and abundances of carbonate minerals in the Holocene sediments of Elk Lake recorded this climatic change. Studies of primary productivity, carbonate saturation, water chemistry, and sediment-trap samples show that low-Mg calcite precipitates during the summer, triggered by algal photosynthesis. The epilimnion of Elk Lake is always oversaturated with calcite, and the degree of oversaturation increases progressively during the summer. The pH of the epilimnion increases from <8.0 after spring overturn to almost 9.0 in late summer in response to photosynthetic removal of CO 2 during the summer months. The rate of calcium depletion from the epilimnion is proportional to the increase in pH and the rate of photosynthetic carbon fixation. Today the only carbonate minerals that are accumulating in the sediments of Elk Lake are low-Mg calcite and manganese carbonate (rhodochrosite). Rhodochrosite, and probably manganese oxyhydroxide, precipitates when manganese-rich anoxic bottom waters come in contact with carbonate-rich oxic surface waters. During the arid mid-Holocene prairie period, however, low-Mg calcite, dolomite, aragonite, and rhodochrosite all accumulated in the sediments of Elk Lake. Dolomite formed in Elk Lake during this period in response to a higher Mg:Ca ratio in the water, just as it is forming today in lakes of the prairie regions of western Minnesota. The coincident occurrence of aragonite and biological indicators of high salinity suggests that the salinity of Elk Lake and the Mg:Ca ratio were higher than in any of the present prairie lakes of western Minnesota.

Minnesota↗

Methods for determining magnitude and frequency of floods in California, based on data through water year 2006

Methods for estimating the magnitude and frequency of floods in California that are not substantially affected by regulation or diversions have been updated. Annual peak-flow data through water year 2006 were analyzed for 771 streamflow-gaging stations (streamgages) in California having 10 or more years of data. Flood-frequency estimates were computed for the streamgages by using the expected moments algorithm to fit a Pearson Type III distribution to logarithms of annual peak flows for each streamgage. Low-outlier and historic information were incorporated into the flood-frequency analysis, and a generalized Grubbs-Beck test was used to detect multiple potentially influential low outliers. Special methods for fitting the distribution were developed for streamgages in the desert region in southeastern California. Additionally, basin characteristics for the streamgages were computed by using a geographical information system. Regional regression analysis, using generalized least squares regression, was used to develop a set of equations for estimating flows with 50-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probabilities for ungaged basins in California that are outside of the southeastern desert region. Flood-frequency estimates and basin characteristics for 630 streamgages were combined to form the final database used in the regional regression analysis. Five hydrologic regions were developed for the area of California outside of the desert region. The final regional regression equations are functions of drainage area and mean annual precipitation for four of the five regions. In one region, the Sierra Nevada region, the final equations are functions of drainage area, mean basin elevation, and mean annual precipitation. Average standard errors of prediction for the regression equations in all five regions range from 42.7 to 161.9 percent. For the desert region of California, an analysis of 33 streamgages was used to develop regional estimates of all three parameters (mean, standard deviation, and skew) of the log-Pearson Type III distribution. The regional estimates were then used to develop a set of equations for estimating flows with 50-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probabilities for ungaged basins. The final regional regression equations are functions of drainage area. Average standard errors of prediction for these regression equations range from 214.2 to 856.2 percent. Annual peak-flow data through water year 2006 were analyzed for eight streamgages in California having 10 or more years of data considered to be affected by urbanization. Flood-frequency estimates were computed for the urban streamgages by fitting a Pearson Type III distribution to logarithms of annual peak flows for each streamgage. Regression analysis could not be used to develop flood-frequency estimation equations for urban streams because of the limited number of sites. Flood-frequency estimates for the eight urban sites were graphically compared to flood-frequency estimates for 630 non-urban sites. The regression equations developed from this study will be incorporated into the U.S. Geological Survey (USGS) StreamStats program. The StreamStats program is a Web-based application that provides streamflow statistics and basin characteristics for USGS streamgages and ungaged sites of interest. StreamStats can also compute basin characteristics and provide estimates of streamflow statistics for ungaged sites when users select the location of a site along any stream in California.

California↗

The geophysical character of southern Alaska - Implications for crustal evolution

The southern Alaska continental margin has undergone a long and complicated history of plate convergence, subduction, accretion, and margin-parallel displacements. The crustal character of this continental margin is discernible through combined analysis of aeromagnetic and gravity data with key constraints from previous seismic interpretation. Regional magnetic data are particularly useful in defining broad geophysical domains. One of these domains, the south Alaska magnetic high, is the focus of this study. It is an intense and continuous magnetic high up to 200 km wide and &sim;1500 km long extending from the Canadian border in the Wrangell Mountains west and southwest through Cook Inlet to the Bering Sea shelf. Crustal thickness beneath the south Alaska magnetic high is commonly 40&ndash;50 km. Gravity analysis indicates that the south Alaska magnetic high crust is dense. The south Alaska magnetic high spatially coincides with the Peninsular and Wrangellia terranes. The thick, dense, and magnetic character of this domain requires significant amounts of mafic rocks at intermediate to deep crustal levels. In Wrangellia these mafic rocks are likely to have been emplaced during Middle and (or) Late Triassic Nikolai Greenstone volcanism. In the Peninsular terrane, the most extensive period of mafic magmatism now known was associated with the Early Jurassic Talkeetna Formation volcanic arc. Thus the thick, dense, and magnetic character of the south Alaska magnetic high crust apparently developed as the response to mafic magmatism in both extensional (Wrangellia) and subduction-related arc (Peninsular terrane) settings. The south Alaska magnetic high is therefore a composite crustal feature. At least in Wrangellia, the crust was probably of average thickness (30 km) or greater prior to Triassic mafic magmatism. Up to 20 km (40%) of its present thickness may be due to the addition of Triassic mafic magmas. Throughout the south Alaska magnetic high, significant crustal growth was caused by the addition of mafic magmas at intermediate to deep crustal levels.

Special Paper of the Geological Society of America↗

Ground deformation and gravity for volcano monitoring

Introduction When magma accumulates or migrates, it can cause pressurization and related ground deformation. Characterization of surface deformation provides important constraints on the potential for future volcanic activity, especially in combination with seismic activity, gas emissions, and other indicators. A wide variety of techniques and instrument types have been applied to the study of ground deformation at volcanoes (sidebar, p. 2; Dzurisin, 2000, 2003, 2007). Geodetic instruments include continuously recording Global Navigation Satellite System (GNSS; of which the United States’ Global Positioning System is one example) stations (fig. D1), borehole tiltmeters, and interferometric synthetic aperture radar (InSAR) measurements (from satellites, occupied and unoccupied aircraft systems, and ground-based sensors). Additional geodetic measurements like continuous- and survey-mode gravity (fig. D2) can contribute substantially to interpreting these data. Borehole strainmeters (see chapter K , this volume, by Hurwitz and Lowenstern, 2024) also have outstanding utility for monitoring deformation, although because of cost and permitting challenges, we do not include them as part of standard volcano monitoring networks for U.S. volcanoes. Still other techniques like light detection and ranging (lidar), structure from motion, and optical satellite data can be used to derive gross topographic changes, which can be used to map volcanic deposits, infer eruption rates, and gain insights into the source processes associated with eruptive activity (see chapter G , this volume, on tracking surface changes caused by volcanic activity; Orr and others, 2024). Experience has shown that no single geodetic monitoring technique is adequate to detect and track the entire range of ground-motion patterns that occur at volcanoes, primarily because of the temporal and spatial diversity of volcano deformation (fig. D3). Similarly, the magnitude of surface deformation varies widely. Geodetic monitoring strategies should therefore include multiple techniques and instrument types to cover a wide range of spatial and temporal scales. In identifying recommendations for geodetic instrumentation for volcano monitoring networks, we attempted to maximize the diversity of instrument types to measure the full range of deformation signals and minimize their expense and number; thus, we do not include several well-known deformation-monitoring techniques in our recommendations. Extensometers, for example, measure strains over distances of a few meters and have an excellent record of success in detecting changes in preeruptive localized ground motion across existing cracks, including at Mount St. Helens, Washington (Iwatsubo and others, 1992), and Piton de la Fournaise, Réunion Island (Peltier and others, 2006). Despite being relatively inexpensive, extensometers are best used primarily when localized ground displacements (for example, ground cracks) need to be tracked, and are not necessary at all volcanoes. In considering volcano deformation monitoring strategies, two complicating factors are deserving of special attention. First, not all deformation is driven by subsurface magmatic activity—for example, at many large stratovolcanoes (for example, Mount Rainier), flank collapses and landslides are significant geologic hazards (Reid and others, 2001) that may occur even in the absence of magmatic activity. Monitoring the stability of volcanoes is thus another critical application of geodetic monitoring networks to inform hazard assessment. One of the most famous examples of edifice instability is the large flank collapse that initiated the May 18, 1980, eruption of Mount St. Helens. Deformation monitoring had detected a bulge on the north flank of the mountain in April 1980 that was expanding by several meters per day (Lipman and others, 1981). Given that flank collapses can happen at any time during a period of volcanic unrest (or even outside a period of unrest), the capability to assess edifice stability is critical. Second, although volcanoes are commonly treated as idealized structures that erupt from single points, like centralvent stratovolcanoes, many are characterized by long rift zones from which eruptions may originate, and distributed volcanic fields are characterized by broadly spaced vents. For example, linear dikes are common at Kīlauea, Mauna Loa, and between Mount Shasta and Medicine Lake in California. At Kīlauea, one of these linear dikes emerged more than 40 kilometers (km) away from the summit of the volcano during the lower East Rift Zone eruption in 2018. Other volcanic fields, like Lassen volcanic center, California, or the San Francisco Volcanic Field, Arizona, have many small vents spread over a wide area. Although the instrumentation guidelines presented in this chapter remain phrased for central-vent volcanoes, they should be modified as needed in the context of the eruptive characteristics of each individual volcanic system. Spatial analysis of geodetic network coverage could help to ensure adequate instrumentation in areas where volcanism can occur over a broad area as opposed to a central vent. As an example, consider the adjacent volcanoes Mount Shasta and Medicine Lake. If station locations are chosen based only on the distance from the centers of the volcanoes, then any geodetic anomalies between the two volcanoes—an area of potential volcanism as indicated by the presence of volcanic features—may remain undetected by ground-based instrumentation. The spatial analysis is accomplished via a grid of pressure point sources (Mogi, 1958) evenly distributed across the map area, at a depth of 5 km in this example (fig. D4). Each source is inflated until predicted deformations exceed the GNSS white noise uncertainty estimates at one site (Langbein, 2017; Murray and Svarc, 2017). This volume of detectable magma provides a measure of the quality of the coverage (fig. D4). The results indicate that, as of 2022, there is a large area between Mount Shasta and Medicine Lake volcano with existing mapped dikes in which a substantial amount of magma could intrude without being detected geodetically. Applying this style of analysis to individual volcanic systems can provide a guide for designing network geometry given the expected locations of future eruptions.

Scientific Investigations Report↗

A modern analogue for tectonic, eustatic, and climatic processes in cratonic basins: Gulf of Carpentaria, northern Australia

The Gulf of Carpentaria is a tropical, silled epicontinental sea and may be a modern analogue for ancient cratonic basins. For the purpose of this study, the Gulf of Carpentaria is compared to Pennsylvanian cratonic basins of the United States. During the Pennsylvanian, the North American continent moved from the Southern Hemisphere, through the Equator, into the Northern Hemisphere. Today, the Gulf of Carpentaria–New Guinea region is a few degrees south of the Equator and is moving towards it. During the Pennsylvanian, the world was subjected to major glaciations and associated sea-level changes. The island of New Guinea and the Gulf of Carpentaria have undergone similar processes during the Quaternary. A reconnaissance seismic survey of the gulf conducted by the USGS and the Australian National University (ANU), combined with oil-exploration well data, provided the first step in a systematic evaluation of a modern tropical epicontinental system. During the Cenozoic, the region was dominated by terrestrial sedimentation in a temperate climate. At the same time, carbonates were being deposited on the northern shelf edge of the Australian Plate. During the Miocene, carbonate deposition expanded southward into the gulf region. Then in the Late Miocene, carbonate sedimentation was replaced by terrigenous clastics derived from the developing Central Range of the island of New Guinea, which developed a wetter climate while moving northwards into the tropics. At least 14 basin-wide transgressive–regressive cycles are identified by channels that were eroded under subaerial conditions since about the Miocene. Comparison of the modern Gulf of Carpentaria sequences with those of the Pennsylvanian reveals many similarities.

Gulf Of Carpentaria↗

Food habits of rodents inhabiting arid and semi-arid ecosystems of central New Mexico

In this study, we describe seasonal dietary composition for 15 species of rodents collected in all major habitats on the Sevilleta National Wildlife Refuge (Socorro County) in central New Mexico. A comprehensive literature review of food habits for these species from throughout their distribution also is provided. We collected rodents in the field during winter, spring and late summer in 1998 from six communities: riparian cottonwood forest; pi&ntilde;on-juniper woodland; juniper-oak savanna; mesquite savanna; short-grass steppe; and Chihuahuan Desert scrubland. Rodents included Spermophilus spilosoma (Spotted Ground Squirrel), Perognathus flavescens (Plains Pocket Mouse), Perognathus flavus (Silky Pocket Mouse), Dipodomys merriami (Merriam&rsquo;s Kangaroo Rat), Dipodomys ordii (Ord&rsquo;s Kangaroo Rat), Dipodomys spectabilis (Banner-tailed Kangaroo Rat), Reithrodontomys megalotis (Western Harvest Mouse), Peromyscus boylii (Brush Mouse), Peromyscus eremicus (Cactus Mouse), Peromyscus leucopus (White-footed Mouse), Peromyscus truei (Pi&ntilde;on Mouse), Onychomys arenicola (Mearn&rsquo;s Grasshopper Mouse), Onychomys leucogaster (Northern Grasshopper Mouse), Neotoma albigula/leucodon (White-throated Woodrats), and Neotoma micropus (Southern Plains Woodrat). We collected stomach contents of all species, and cheek-pouch contents of heteromyids, and quantified them in the laboratory. We determined seasonal diets in each habitat by calculating mean percentage volumes of seeds, arthropods and green vegetation (plant leaves and stems) for each species of rodent. Seeds consumed by each rodent were identified to genus, and often species, and quantified by frequency counts. Comparisons of diets between and among species of rodents, seasons, and ecosystems were also examined. We provide an appendix of all plant taxa documented.

Special publication of the Museum of Southwestern ↗

Connectivity of Mojave Desert tortoise populations—Management implications for maintaining a viable recovery network

Executive Summary The historic distribution of Mojave desert tortoises ( Gopherus agassizii ) was relatively continuous across the range, and the importance of tortoise habitat outside of designated tortoise conservation areas (TCAs) to recovery has long been recognized for its contributions to supporting gene flow between TCAs and to minimizing impacts and edge effects within TCAs. However, connectivity of Mojave desert tortoise populations has become a concern because of recent and proposed development of large tracts of desert tortoise habitat that cross, fragment, and surround designated conservation areas. This paper summarizes the underlying concepts and importance of connectivity for Mojave desert tortoise populations by reviewing current information on connectivity and providing information to managers for maintaining or enhancing desert tortoise population connectivity as they consider future proposals for development and management actions. Maintaining an ecological network for the Mojave desert tortoise, with a system of core habitats (TCAs) connected by linkages, is necessary to support demographically viable populations and long-term gene flow within and between TCAs. There are four points for wildlife and land-management agencies to consider when making decisions that could affect connectivity of Mojave desert tortoise populations (for example, in updating actions in resource management plans or amendments that could help maintain or restore functional connectivity in light of the latest information): Management of all desert tortoise habitat for persistence and connectivity . Desert tortoise populations continue to decline within most TCAs, and it is unlikely that trends are better in populations outside protected areas. Fragmentation exacerbates negative population trends by breaking large continuous populations into smaller isolated populations. Connectivity within large populations can enhance resilience to localized disturbances due to rescue by neighboring individuals. In contrast, smaller fragmented populations are resistant to rescue by their isolation and thus could suffer irreversible declines to extirpation from a variety of threats and stochastic events. Enhanced threat reduction to reverse declines within TCAs and to maintain occupied habitat in the surrounding matrix would help reduce the variability in population growth rates and improve the resilience of protected populations even while implementing efforts to improve connectivity. Each TCA has unique strengths and weaknesses regarding its ability to support minimum sustainable populations based on areal extent and its ability to support population increases based on landscape connection with adjacent populations. Considering how proposed projects (inside or outside of TCAs) affect connectivity and the ability of TCAs to support at least 5,000 adult tortoises (the numerical goal for each TCA) could help managers to maintain the resilience of TCAs to population declines. The same project, in an alternative location, could have very different impacts on local and regional populations. For example, within the habitat matrix surrounding TCAs, narrowly delineated corridors may not allow for natural population dynamics if they do not accommodate overlapping home ranges along most of their widths so that tortoises reside, grow, find mates, and produce offspring that can replace older tortoises. In addition, most habitat outside TCAs may receive more surface disturbance than habitat within TCAs. Therefore, managing the entire remaining matrix of desert tortoise habitat for permeability may be better than delineating fixed corridors. These concepts apply, especially given uncertainty about long-term condition of habitat, within and outside of TCAs under a changing climate. Ultimately, questions such as “ What are the critical linkages that need to be protected ?” could be better framed as “ How can we manage the remaining habitat matrix in ways that sustain ecological processes and habitat suitability for special status species ?” Land-management decisions made in the context of the latter question may be more conducive to maintenance of a functional ecological network. Limitations on landscape-level disturbance across habitat managed for the desert tortoise Clearly delineating habitat linkages and differentiating them from non-delineated areas by the uses that are permitted or prohibited within them by specific management guidelines can help achieve functional connectivity. Such guidelines would be most effective if they considered and accounted for all surface disturbances (for example, temporary disturbances such as fiberoptic lines or off-highway vehicle routes, right-of-ways, utility-scale solar development, urbanization) to the extent possible. A weighted framework that varies with the permanence or severity of the disturbance, and can be additive to quantify cumulative effects, could be useful (Xiong, 2020). For example, minor roads can alter tortoise movements independently of other features (Peaden and others, 2017; Hromada and others, 2020), but if the isolated dirt road is accompanied by a powerline that encourages raven predation (Xiong, 2020), then the two features together may be additive. Ignoring minor or temporary disturbance on the landscape could result in a cumulatively large impact that is not explicitly acknowledged (Goble, 2009); therefore, understanding and quantifying all surface disturbance on a given landscape is prudent. In California, the Bureau of Land Management established 0.1–1.0 percent caps on new surface-disturbance for TCAs and mapped linkages that address the issues described in number 1 of this list. Nevada, Utah, and Arizona currently do not have surface-disturbance limits. Limits comparable to those in the Desert Renewable Energy Conservation Plan (DRECP) would be 0.5 percent within TCAs and 1 percent within the linkages modeled by Averill-Murray and others (2013). Limits in some areas of California within the Desert Renewable Energy Conservation Plan, such as Ivanpah Valley, are more restrictive, at 0.1 percent. Continuity across the state line in Nevada could be achieved with comparable limits in the adjacent portion of Ivanpah Valley, as well as the Greater Trout Canyon Translocation Area and the Stump Springs Regional Augmentation Site. These more restrictive limits would help protect remaining habitat in the major interstate connectivity pathway through Ivanpah Valley and focal areas of population augmentation that provide additional population connectivity along the western flank of the Spring Mountains. In a recent study that analyzed 13 years of desert tortoise monitoring data, nearly all desert tortoise observations were at sites in which 5 percent or less of the surrounding landscape within 1 kilometer was disturbed (Carter and others, 2020a). To help maintain tortoise habitability and permeability across all other non-conservation-designated tortoise habitat, all surface disturbance could be limited to less than 5-percent development per square kilometer because the 5-percent threshold for development is the point at which tortoise occupation drops precipitously (Carter and others, 2020a). However, although individual desert tortoises were observed at development levels up to 5 percent, we do not know the fitness or reproductive characteristics of these individuals. This level of development also may not allow for long-term persistence of healthy populations that are of adequate size needed for demographic or functional connectivity; therefore, a conservative interpretation suggests that, ideally, development could be lower. Lower development levels would be particularly useful in areas within the upper 5th percentile of connectivity values modeled by Gray and others (2019). Reducing ancillary threats in places where connectivity is restricted to narrow strips of habitat, for example, narrow mountain passes or vegetated strips between solar development, could enhance the functionality of these vulnerable linkages. In such areas, maintaining multiple, redundant linkages could further enhance overall connectivity. Minimization of mortality from roads and maximization of passage under roads . Roads pose a significant threat to the long-term persistence of local tortoise populations, and roads of high traffic volume lead to severe population declines, which ultimately fragments populations farther away from the roads. Three points (a.–c.) pertain to reducing direct mortality of tortoises on the many paved roads that cross desert tortoise habitat and to maintaining a minimal level of permeability across these roads: Tortoise-exclusion fencing tied into culverts, underpasses, overpasses, or other passages below roads in desert tortoise habitat, would limit vehicular mortality of tortoises and provide opportunities for movement across the roads. Installation of shade structures on the habitat side of fences installed in areas with narrow population-depletion zones would limit overheating of tortoises that may pace the fence. Passages below highways could be maintained or retrofitted to ensure safe tortoise access, for example, by filling eroded drop-offs or modifying erosion-control features such as rip-rap to make them safer and more passable for tortoises. Wildlife management agencies could work with transportation departments to develop construction standards that are consistent with hydrologic/erosion management goals, while also incorporating a design and materials consistent with tortoise survival and passage and make the standards widely available. The process would be most effective if the status of passages was regularly monitored and built into management plans. Healthy tortoise populations along fenced highways could be supported by ensuring that land inside tortoise-exclusion fences is not so degraded that it leads to degradation of tortoise habitat outside the exclusion areas. For example, severe invasive plant infestations inside a highway exclusion could cause an increase of invasive plants outside the exclusion area and degrade habitat; therefore, invasive plants inside road rights of way could be mown or treated with herbicide to limit their spread into adjacent tortoise habitat and minimize the risk of these plants carrying wildfires into adjacent habitat. Adaptation of management based on new information . Future research will continue to build upon and refine models related to desert tortoise population connectivity and develop new ones. New models could consider landscape levels of development and be constructed such that they share common foundations to support future synthesis efforts. If model development was undertaken in partnership with entities that are responsible for management of desert tortoise habitat, it would facilitate incorporation of current and future modeling results into their land management decisions. There are specific topics that may be clarified with further evaluation: The effects of climate change on desert tortoise habitat, distribution, and population connectivity; The effects of large-scale fires, especially within repeatedly burned habitat, on desert tortoise distribution and population connectivity; The ability of solar energy facilities or similar developments to support tortoise movement and presence by leaving washes intact; leaving native vegetation intact whenever possible, or if not possible, mowing the site, allowing vegetation to re-sprout, and managing weeds; and allowing tortoises to occupy the sites; and The design and frequency of underpasses necessary to maintain functional demographic and genetic connectivity across linear features, like highways.

Arizona, California, Nevada↗

The Snowmastodon Project

Studies of terrestrial biotic and environmental dynamics of the last interglacial period, Marine Oxygen Isotope Stage (MIS) 5, provide insight into the effects of long-term climate change on Pleistocene ecosystems. In North America, however, there are relatively few fossil sites that definitively date to MIS 5. Even fewer contain multiple ecosystem components (vertebrates, invertebrates, plants) that have been studied in detail, and none are located at high elevation. Thus, our view of North American ecosystems during MIS 5 is, at best, an incomplete composite view, and alpine ecosystems are entirely undocumented. The Ziegler Reservoir fossil site allows us to begin filling these gaps. Discovered on October 14, 2010 by a construction crew while enlarging a small reservoir near Snowmass Village, Colorado (USA), the site is situated high in the Rocky Mountains at an elevation of ~ 2705 m. Initial excavations exposed a series of stacked fossil ecosystems, including abundant faunal and floral components. Subsequent work revealed an exceptionally diverse biota composed of nearly 6000 large bones of late Pleistocene megafauna, including mastodons, mammoths, ground sloths, horses, camels, deer, bison, black bear, coyotes, and big horn sheep. This collection is complemented by more than 200 bones from at least 40 species of small animals including otters, muskrats, minks, rabbits, beavers, frogs, lizards, snakes, fish, and birds, and more than 20,000 salamander bones. Geomorphic evidence and multiple dating techniques show that the small, ridge-top basin containing the site was formed by a lateral lobe of a valley glacier that filled, and ultimately overtopped, the Snowmass Creek drainage during the Bull Lake glaciation (MIS 6). When the glacier receded, a lake that occupied the basin began to fill slowly with what is hypothesized to be eolian sediment and occasional input from slope failures of the impounding moraine. As sedimentation continued, the lake transformed first into a shallow pond, then a marsh, and later an alpine meadow. In all, the Ziegler Reservoir sedimentary record spans the time encompassed by the end of MIS 6, all of MIS 5 and MIS 4, and the earliest part of MIS 3. MIS 5e, which is considered to be the peak warmth of the last interglacial period, is especially well represented. Preservation of organic material at the Ziegler Reservoir fossil site is exceptional. Even after more than 100,000 years of burial, sedge and willow leaves were still green, mollusks and gastropods showed color, beetle parts remained iridescent, fossil conifer cones were intact, and an entire beach of 20-meter-long driftwood logs was found intact. The exquisite preservation allowed for detailed analysis of pollen, plant macrofossils, conifer cones, and fossil wood, as well as insects, chironomids, mollusks, ostracodes, and other invertebrates &mdash; all in addition to the spectacular faunal remains. This special volume of Quaternary Research represents a comprehensive scientific report of &ldquo;The Snowmastodon Project,&rdquo; as the investigations at the Ziegler Reservoir fossil site came to be known. Summarizing the work of scientists from more than 20 institutions, the volume details the environments in which the animals lived, provides insight into how they died, and forms the foundation of our understanding of alpine ecosystem dynamics during the last interglacial period in the Rocky Mountains.

Quaternary Research↗

Paleoproterozoic Mojave Province in northwestern Mexico? Isotopic and U-Pb zircon geochronologic studies of Precambrian and Cambrian crystalline and sedimentary rocks, Caborca, Sonora

Whole-rock Nd isotopic data and U-Pb zircon geochronology from Precambrian crystalline rocks in the Caborca area, northern Sonora, reveal that these rocks are most likely a segment of the Paleoproterozoic Mojave province. Supporting this conclusion are the observations that paragneiss from the > or =1.75 Ga Bamori Complex has a 2.4 Ga Nd model age and contains detrital zircons ranging in age from Paleoproterozoic (1.75 Ga) to Archean (3.2 Ga). Paragneisses with similar age and isotopic characteristics occur in the Mojave province in southern California. In addition, "A-type" granite exposed at the southern end of Cerro Rajon has ca 2.0 Ga Nd model age and a U-Pb zircon age of 1.71 Ga, which are similar to those of Paleoproterozoic granites in the Mojave province. Unlike the U.S. Mojave province, the Caborcan crust contains ca. 1.1 Ga granite (Aibo Granite), which our new Nd isotopic data suggest is largely the product of anatexis of the local Precambrian basement. Detrital zircons from Neoproterozoic to early Cambrian miogeoclinal arenites at Caborca show dominant populations ca. 1.7 Ga, ca. 1.4 Ga, and ca. 1.1 Ga, with subordinate Early Cambrian and Archean zircons. These zircons were likely derived predominately from North American crust to the east and northeast, and not from the underlying Caborcan basement. The general age and isotopic similarities between Mojave province basement and overlying miogeoclinal sedimentary rocks in Sonora and southern California is necessary, but not sufficient, proof of the hypothesis that Sonoran crust is allochthonous and was transported to its current position during the Mesozoic along the proposed Mojave-Sonora megashear. One viable alternative model is that the Caborcan Precambrian crust is an isolated, autochthonous segment of Mojave province crust that shares a similar, but not identical, Proterozoic geological history with Mojave province crust found in the southwest United States.

Sonora↗

Source region of a granite batholith: evidence from lower crustal xenoliths and inherited accessory minerals

Like many granites, the Late Cretaceous intrusives of the eastern Mojave Desert, California, have heretofore provided useful but poorly focused images of their source regions. New studies of lower crustal xenoliths and inherited accessory minerals are sharpening these images. Xenoliths in Tertiary dykes in this region are the residues of an extensive partial melting event. Great diversity in their composition reflects initial heterogeneity (both igneous and sedimentary protoliths) and varying amounts of melt extraction (from <10% to >70%). Mineral assemblages and thermobarometry suggest that the melting event occurred at T≥750°C at a depth of about 40 km. Present-day Sr, Nd, and Pb isotopic ratios indicate a Mojave Proterozoic heritage, but unrealistic model ages demonstrate the late Phanerozoic adjustment of parent/daughter ratios. A link between these xenoliths and the Late Cretaceous granites, though not fully documented, is probable; in any case, they provide invaluable clues concerning a crustal melting event, recording information about nature of source material (heterogeneous, supracrustal-rich), conditions of melting (moderately deep, moderately high T, accompanied by partial dehydration), and melt extraction (highly variable, locally extensive). The Old Woman-Piute granites contain a large fraction of inherited zircon and monazite. A SHRIMP ion probe investigation shows that these zircons record a Proterozoic history similar to that which affected the Mojave region. Zonation patterns in zircons, and to a lesser extent monazites and xenotimes, document multiple phases of igneous, metamorphic, and sedimentary growth and degradation, commonly several in a single grain. Low Y in portions of the cores of inherited zircons and monazites and in monazites and outer portions of zircons from the xenoliths appear to indicate growth in equilibrium with abundant garnet.

California↗

Intrusive rock database for the Digital Geologic Map of Utah

Digital geologic maps offer the promise of rapid and powerful answers to geologic questions using Geographic Information System software (GIS). Using modern GIS and database methods, a specialized derivative map can be easily prepared. An important limitation can be shortcomings in the information provided in the database associated with the digital map, a database which is often based on the legend of the original map. The purpose of this report is to show how the compilation of additional information can, when prepared as a database that can be used with the digital map, be used to create some types of derivative maps that are not possible with the original digital map and database. This Open-file Report consists of computer files with information about intrusive rocks in Utah that can be linked to the Digital Geologic Map of Utah (Hintze et al., 2000), an explanation of how to link the databases and map, and a list of references for the databases. The digital map, which represents the 1:500,000-scale Geologic Map of Utah (Hintze, 1980), can be obtained from the Utah Geological Survey (Map 179DM). Each polygon in the map has a unique identification number. We selected the polygons identified on the geologic map as intrusive rock, and constructed a database (UT_PLUT.xls) that classifies the polygons into plutonic map units (see tables). These plutonic map units are the key information that is used to relate the compiled information to the polygons on the map. The map includes a few polygons that were coded as intrusive on the state map but are largely volcanic rock; in these cases we note the volcanic rock names (rhyolite and latite) as used in the original sources Some polygons identified on the digital state map as intrusive rock were misidentified; these polygons are noted in a separate table of the database, along with some information about their true character. Fields may be empty because of lack of information from references used or difficulty in finding information. The information in the database is from a variety of sources, including geologic maps at scales ranging from 1:500,000 to 1:24,000, and thesis monographs. The references are shown twice: alphabetically and by region. The digital geologic map of Utah (Hintze and others, 2000) classifies intrusive rocks into only 3 categories, distinguished by age. They are: Ti, Tertiary intrusive rock; Ji, Upper to Middle Jurassic granite to quartz monzonite; and pCi, Early Proterozoic to Late Archean intrusive rock. Use of the tables provided in this report will permit selection and classification of those rocks by lithology and age. This database is a pilot study by the Survey and Analysis Project of the U.S. Geological Survey to characterize igneous rocks and link them to a digital map. The database, and others like it, will evolve as the project continues and other states are completed. We release this version now as an example, as a reference, and for those interested in Utah plutonic rocks.

Utah↗

Characteristics of Southern California coastal aquifer systems

Most groundwater produced within coastal Southern California occurs within three main types of siliciclastic basins: (1) deep (>600 m), elongate basins of the Transverse Ranges Physiographic Province, where basin axes and related fluvial systems strike parallel to tectonic structure, (2) deep (>6000 m), broad basins of the Los Angeles and Orange County coastal plains in the northern part of the Peninsular Ranges Physiographic Province, where fluvial systems cut across tectonic structure at high angles, and (3) shallow (75-350 m), relatively narrow fluvial valleys of the generally mountainous southern part of the Peninsular Ranges Physiographic Province in San Diego County. Groundwater pumped for agricultural, industrial, municipal, and private use from coastal aquifers within these basins increased with population growth since the mid-1850s. Despite a significant influx of imported water into the region in recent times, groundwater, although reduced as a component of total consumption, still constitutes a significant component of water supply. Historically, overdraft from the aquifers has caused land surface subsidence, flow between water basins with related migration of groundwater contaminants, as well as seawater intrusion into many shallow coastal aquifers. Although these effects have impacted water quality, most basins, particularly those with deeper aquifer systems, meet or exceed state and national primary and secondary drinking water standards. Municipalities, academicians, and local water and governmental agencies have studied the stratigraphy of these basins intensely since the early 1900s with the goals of understanding and better managing the important groundwater resource. Lack of a coordinated effort, due in part to jurisdictional issues, combined with the application of lithostratigraphic correlation techniques (based primarily on well cuttings coupled with limited borehole geophysics) have produced an often confusing, and occasionally conflicting, litany of names for the various formations, lithofacies, and aquifer systems identified within these basins. Despite these nomenclatural problems, available data show that most basins contain similar sequences of deposits and share similar geologic histories dominated by glacio-eustatic sea-level fluctuations, and overprinted by syndepositional and postdepositional tectonic deformation. Impermeable, indurated mid-Tertiary units typically form the base of each siliciclastic groundwater basin. These units are overlain by stacked sequences of Pliocene to Holocene interbedded marine, paralic, fluvial, and alluvial sediment (weakly indurated, folded, and fractured) that commonly contain the historically named "80-foot sand," "200-foot sand," and "400-foot gravel" in the upper part of the section. An unconformity, cut during the latest Pleistocene lowstand (?? 18 O stage 2; ca. 18 ka), forms a major sequence boundary that separates these units from the overlying Holocene fluvial sands and gravels. Unconfined aquifers occur in amalgamated coarse facies near the bounding mountains (forebay area). These units are inferred to become lithologically more complex toward the center of the basins and coast line, where interbedded permeable and low-permeability alluvial, fluvial, paralic, and marine facies contain confined aquifers (pressure area). Coastal bounding faults limit intrabasin and/or interbasin flow in parts of many basins. ?? 2009 Geological Society of America.

Special Paper of the Geological Society of America↗

Modeling sandhill crane population dynamics

The impact of sport hunting on the Central Flyway population of sandhill cranes (Grus canadensis) has been a subject of controversy for several years. A recent study (Buller 1979) presented new and important information on sandhill crane population dynamics. The present report is intended to incorporate that and other information into a mathematical model for the purpose of assessing the long-range impact of hunting on the population of sandhill cranes.The model is a simple deterministic system that embodies density-dependent rates of survival and recruitment. The model employs four kinds of data: (1) spring population size of sandhill cranes, estimated from aerial surveys to be between 250,000 and 400,000 birds; (2) age composition in fall, estimated for 1974-76 to be 11.3% young; (3) annual harvest of cranes, estimated from a variety of sources to be about 5 to 7% of the spring population; and (4) age composition of harvested cranes, which was difficult to estimate but suggests that immatures were 2 to 4 times as vulnerable to hunting as adults.Because the true nature of sandhill crane population dynamics remains so poorly understood, it was necessary to try numerous (768 in all) combinations of survival and recruitment functions, and focus on the relatively few (37) that yielded population sizes and age structures comparable to those extant in the real population. Hunting was then applied to those simulated populations. In all combinations, hunting resulted in a lower asymptotic crane population, the decline ranging from 5 to 54%. The median decline was 22%, which suggests that a hunted sandhill crane population might be about three-fourths as large as it would be if left unhunted. Results apply to the aggregate of the three subspecies in the Central Flyway; individual subspecies or populations could be affected to a greater or lesser degree.

Special Scientific Report - Wildlife↗