USGS Science⌕ Search

SEARCH · USGS Science

Results for “Marine Ornithology: Journal of Seabird Research and Conservation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,688 records · Page 60Linked to original sources
USGS1989

Techniques for simulating flood hydrographs and estimating flood volumes for ungaged basins in east and west Tennessee

A dimensionless hydrograph developed for a variety of basin conditions in Georgia was tested for its applicability to streams in East and West Tennessee by comparing it to a similar dimensionless hydrograph developed for streams in East and West Tennessee. Hydrographs of observed discharge at 83 streams in East Tennessee and 38 in West Tennessee were used in the study. Statistical analyses were performed by comparing simulated (or computed) hydrographs, derived by application of the Georgia dimensionless hydrograph, and dimensionless hydrographs developed from Tennessee data, with the observed hydrographs at 50 and 75% of their peak-flow widths. Results of the tests indicate that the Georgia dimensionless hydrography is virtually the same as the one developed for streams in East Tennessee, but that it is different from the dimensionless hydrograph developed for streams in West Tennessee. Because of the extensive testing of the Georgia dimensionless hydrograph, it was determined to be applicable for East Tennessee, whereas the dimensionless hydrograph developed from data on streams in West Tennessee was determined to be applicable in West Tennessee. As part of the dimensionless hydrograph development, an average lagtime in hours for each study basin, and the volume in inches of flood runoff for each flood event were computed. By use of multiple-regression analysis, equations were developed that relate basin lagtime to drainage area size, basin length, and percent impervious area. Similarly, flood volumes were related to drainage area size, peak discharge, and basin lagtime. These equations, along with the appropriate dimensionless hydrograph, can be used to estimate a typical (average) flood hydrograph and volume for recurrence-intervals up to 100 years at any ungaged site draining less than 50 sq mi in East and West Tennessee.

Tennessee↗
USGS2024

Limited evidence of late Quaternary tectonic surface deformation in the eastern Tennessee seismic zone, USA

The ~300-km-long eastern Tennessee seismic zone (ETSZ), USA, is the second-most seismically active region east of the Rocky Mountains. Seismicity generally occurs below the Paleozoic fold-and-thrust belt within the Mesoproterozoic basement, at depths of 5–26 km, and earthquake magnitudes during the instrumental record have been moment magnitude ( M w )≤4.8. Evidence of surface deformation may not exist or be difficult to detect because of the vegetated and soil-mantled landscape, landslides, locally steep topography, anthropogenic landscape modification, or long, irregular recurrence intervals between surface-rupturing earthquakes. Despite the deep seismicity, analog models indicate that accumulation of strike-slip or oblique-slip displacement at depth could be expected to propagate upward through the Paleozoic section, producing a detectable surficial signal of distributed faulting. To identify potential surface deformation, we interrogated the landscape at different spatial scales. We evaluated morphotectonic and channel metrics, such as channel sinuosity and catchment-scale hypsometry. Additionally, we mapped possible fault-related topographic features on 1-m lidar. Finally, we integrated our observations with available bedrock and Quaternary surficial mapping and subsurface geophysical data. At a regional scale, most morphotectonic and channel metrics have a strong lithologic control. Within smaller regions of similar lithology, we observe changes in landscape metrics like channel sinuosity and catchment-scale hypsometry that spatially correlate with new lineaments identified in this study and previously mapped east–west Cenozoic faults. These faults have apparent left-lateral offsets, are optimally oriented to slip in the current stress field, and match kinematics from recent focal mechanisms, but do not clearly preserve evidence of late Pleistocene or Holocene tectonic surface deformation. Most newly mapped lineaments might be explained by either tectonic or non-tectonic origins, such as fluvial or karst processes. We also re-evaluated a previously described paleoseismic site and interpret that the exposure does not record evidence of late Pleistocene faulting but instead is explained by fluvial stratigraphy.

Tennessee↗
USGS1998

Assessment of the hydraulic connection between ground water and the Peace River, west-central Florida

The hydraulic connection between the Peace River and the underlying aquifers along the length of the Peace River from Bartow to Arcadia was assessed to evaluate flow exchanges between these hydrologic systems. Methods included an evaluation of hydrologic and geologic records and seismic-reflection profiles, seepage investigations, and thermal infrared imagery interpretation. Along the upper Peace River, a progressive long-term decline in streamflow has occurred since 1931 due to a lowering of the potentiometric surface of the Upper Floridan aquifer by as much as 60 feet because of intensive ground-water withdrawals for phosphate mining and agriculture. Another effect from lowering the potentiometric surface has been the cessation of flow at several springs located near and within the Peace River channel, including Kissengen Spring, that once averaged a flow of about 19 million gallons a day. The lowering of ground-water head resulted in flow reversals at locations where streamflow enters sinkholes along the streambed and floodplain. Hydrogeologic conditions along the Peace River vary from Bartow to Arcadia. Three distinctive hydrogeologic areas along the Peace River were delineated: (1) the upper Peace River near Bartow, where ground-water recharge occurs; (2) the middle Peace River near Bowling Green, where reversals of hydraulic gradients occur; and (3) the lower Peace River near Arcadia, where ground-water discharge occurs. Seismic-reflection data were used to identify geologic features that could serve as potential conduits for surface-water and ground-water exchange. Depending on the hydrologic regime, this exchange could be recharge of surface water into the aquifer system or discharge of ground water into the stream channel. Geologic features that would provide pathways for water movement were identified in the seismic record; they varied from buried irregular surfaces to large-scale subsidence flexures and vertical fractures or enlarged solution conduits. Generally, the upper Peace River is characterized by a shallow, buried irregular top of rock, numerous observed sinkholes, and subsidence depressions. The downward head gradient provides potential for the Peace River to lose water to the ground-water system. Along the middle Peace River area, head gradients alternate between downward and upward, creating both recharging and discharging ground-water conditions. Seismic records show that buried, laterally continuous reflectors in the lower Peace River pinch out in the middle Peace River streambed. Small springs have been observed along the streambed where these units pinch out. This area corresponds to the region where highest ground-water seepage volumes were measured during this study. Further south, along the lower Peace River, upward head gradients provide conditions for ground-water discharge into the Peace River. Generally, confinement between the surficial aquifer and the confined ground-water systems in this area is better than to the north. However, localized avenues for surface-water and ground-water interactions may exist along discontinuities observed in seismic reflectors associated with large-scale flexures or subsidence features. Ground-water seepage gains or losses along the Peace River were quantified by making three seepage runs during periods of: (1) low base flow, (2) high base flow, and (3) high flow. Low and high base-flow seepage runs were performed along a 74-mile length of the Peace River, between Bartow and Nocatee. Maximum losses of 17.3 cubic feet per second (11.2 million gallons per day) were measured along a 3.2-mile reach of the upper Peace River. The high-flow seepage run was conducted to quantify losses in the Peace River channel and floodplain between Bartow and Fort Meade. Seepage losses calculated during high-flow along a 7.2-mile reach of the Peace River, from the Clear Springs Mine bridge to the Mobil Mine bridge, were approximately 10 percent of the river flow, or 118 cubic feet per second. Calculated seepages along the Peace River in Hardee and De Soto Counties were inconclusive, because most seepages were within the range of discharge measurement error. Two continuous aerial thermal infrared imagery surveys were conducted to locate sites of ground-water discharge along the Peace River. Although temperature and hydrologic conditions were ideal to observe spring flow using thermal infrared imaging techniques, no sources of ground-water discharge were identified using this method. Diffuse ground-water seepage may, however, provide significant ground-water discharge.

Florida↗
USGS1973

Geohydrology of the Cross-Florida Barge Canal area, with special reference to the Ocala vicinity

The Cross-Florida Barge Canal route commences at Palatka on the St. Johns River, about 75 miles upstream from the Atlantic Ocean, and extends 110 miles southwestward across Peninsular Florida into deep water in the Gulf of Mexico near Yankeetown. The canal will be equipped with five locks, each 600 feet long and 84 feet wide, and the channel will be a minimum of 12 feet deep and 150 feet wide. From near Ocala northeastward, the canal channel will replace much of the natural channel of the Oklawaha River, and will be excavated into beds of the so-called shallow sand aquifer of Miocene age and younger, which overlies limestone of the Floridan aquifer. Westward from Ocala, most of the canal will be excavated below the potentiometric surface into limestone and dolomite of the Floridan aquifer. Water levels of Rodman, Eureka, and Inglis Pools will be controlled by dams and spillways with the limited exchange of water between the pools and the aquifers. The water levels in the Summit Pools will fluctuate with the natural changes in the ground-water level of the Floridan aquifer, although the stage of the pool will be controlled partly by the stage held in the Eureka Pool. A dynamic inflow-outflow relationship will exist between the Summit Pool and the Floridan aquifer. The Floridan aquifer in the canal area is 1,000 to 1,200 feet thick and consists of limestone and dolomite of middle Eocene Miocene age, including from older to younger, the Lake City, Avon Park, and Ocala limestones plus permeable sandy, dolomitic limestone in the lower part of the Hawthorn Formation. It is possible that most of the flow to the two major springs in the area occurs in the upper 100 feet or so of the aquifer in the Ocala Limestone. The aquifer is underlain by the Oldsmar limestone of early Eocene age and is overlain by sand, clayey sand, clay and shell beds of Miocene through Holocene age, in thickness from a few feet to 300 feet. The permeable beds overlying the Floridan aquifer constitute the shallow aquifer, while the poorly permeable ones act as confining beds where the Floridan aquifer is under artesian conditions. A north-south line drawn separating the head of Silver Springs on the west from the Oklawaha River on the east marks the approximate western limit of a continuous blanket of materials of Miocene-Pliocene(?) age covering the rocks of the Floridan aquifer. East of the line, much of the aquifer is under artesian conditions, particularly in the Oklawaha River valley, although in some areas east of the valley, direct recharge through thick permeable Miocene-Pliocene(?) sands occurs. West of the line, only scattered remnants of a once continuous Miocene-Pliocene(?) cover remain. Lack of the cover is a result of erosion on the crest and flank of the Ocala Uplift, a broad northwest-southeast trending anticlinal upwarp, the axis of which is crossed by the canal route in the Dunnellon area. Over most of this area the Floridan aquifer is unconfined and receives direct recharge through a cover of a few tens of feet of sand and clayey sand of Quaternary age. Tensional stresses during the structural evolution of the Ocala Uplift produced an intersecting system of fractures and normal faults in rocks of the Floridan aquifer. The fractures and faults are important controls for orientation of solution channels and, therefore, for development of ground-water circulation patterns. When the system surface streams, which once drained the Barge Canal area, eroded the poorly permeable Miocene-Pliocene(?) cover from the flanks of the Ocala Uplift, surface runoff was reduced and precipitation began to directly infiltrate the underlying limestones. Now only principal streams remain, such as the Oklawaha and Withlacoochee Rivers and a few short tributaries, while one of the most highly developed subsurface drainage systems in the world has evolved in cavernous limestone of the Floridan aquifer. Two of the larger freshwater springs in the world now discharge from the Floridan aquifer in the canal area. Silver Springs near Ocala discharges an average 531 mgd (million gallons per day) down the 4-mile long Silver River, which flows on poorly permeable beds to the Oklawaha River. Rainbow Springs near Dunnellon discharges on average 468 mgd from numerous orifices in the bed of the 5-mile-long Rainbow River, which flows into the Withlacoochee River. The heads of the springs have migrated to their present positions partly because of a tendency of ground-water levels to decline as permeability in the aquifer is increased due to removal of limestone by solution, and because of mechanical erosion of the limestone in the vicinity of the spring heads. Also, points of principal spring discharges have shifted in the past due to changes in ground-water levels in response to changes in sea level. The subsurface drainage system is continuing to evolve today, as evidenced in part by frequent occurrence of new sinkholes and by the presence of significant amounts of calcium bicarbonate in the spring waters. Rodman Pool, at the east end of the canal, is separated from the Floridan aquifer by poorly permeable materials. The pool's operating water level will be only a few feet above the potentiometric surface at the downstream end, and at or slightly below the potentiometric surface at the upstream end. Little exchange of water between the Rodman Pool and the Floridan aquifer is expected. Eureka Pool, just upstream from Rodman Pool, will also be separated from the Floridan aquifer by poorly permeable beds. However, the stage of the pool will be about 15 feet higher than the natural potentiometric surface at the pool's downstream end, and some seepage into the Floridan aquifer is anticipated through faults and leaky parts of the poorly permeable beds, with a consequent rise in ground-water levels in areas adjacent to the lower end of the pool. Possibilities for particulate contamination of the aquifer will tend to be minimized because of the filtering capacity of the materials through which water must pass to reach the aquifer, although the natural filter will not preclude movement into the aquifer of contaminants which might become dissolved in the pool waters. No significant interchange of water between the pool and the aquifer is expected at the upstream end of the Eureka Pool. Present construction plans indicate an operating stage for Eureka Pool which will range between 38 and 40 feet above mean sea level, although it is possible to dredge the pool deep enough to permit a range in stage of 36 to 40 feet. A backwater effect extending up Silver River from the Eureka Pool is expected to regulate the stage at the head of Silver Springs between 39 and 44 feet above mean sea level if the pool ranges between 36 and 40 feet. If Eureka Pool ranges only between 38 and 40 feet, the range of stage at the head of the springs should be about 41 to 44 feet above mean sea level. From Inglis Lock west, the canal will have direct connection with the Gulf, and canal stage will fluctuate with the Gulf tide. Since the canal stage will be slightly lower than the adjacent ground-water levels along much of the reach, there will be some ground-water inflow to the canal. No significant changes in the existing ground-water regime are expected in the vicinity of Inglis Pool, the first step up in the canal east of the Gulf. Existing ground-water and surface-water levels in the area will not change appreciable, and the natural stage and flow of Rainbow Springs, which will flow by way of Rainbow River into Inglis Pool, should not be affected by canal operations. A possible adverse effect of the canal on the Inglis Pool area could result if sea water is locked up from the Gulf through Inglis Lock. However, the high step of 25 feet at the lock, flushing action of continuous flow from Inglis Pool to the lower reaches of the Withlacoochee River, and use of possible preventive locking procedures should minimize the problem. The potential for adverse effects on the ground-water regime is greatest in the area of the Summit Pool. Through most of the length of the pool, the canal channel will be excavated into limestone of the Floridan aquifer to depths of 12 to 27 feet below the potentiometric surface. Changes that will take place in the ground-water flow system in the Silver Springs drainage area, once the canal is completed, were estimated by flow-net analysis. Variation in aquifer transmissivity was determined by calculating transmissivity in 25 different flow cells surrounding Silver Springs. Transmissivity in the 25 cells averages about 15,600,000 gpd/ft [2,090,000 ft2/day (feet squared)], but transmissivity in the six cells through which the Summit Pool passes ranges from 9,000,000 to 44,000,000 gpd/ft (1,210,000 to 5,900,000 ft2/day). Transmissivity was used to compute static stage of the Summit Pool under given ground-water level conditions. Had the canal existed in May 1968 and had the stage of Eureka Pool been held at 36 feet at the time, the static stage in Summit Pool would have been about 42.1 feet above mean sea level. Thus, a conceptual model of the changes in the potentiometric surface wrought by the finished canal was drawn, and zones of ground-water inflow and outflow were delineated. Most outflow from the Summit Pool to the aquifer should be limited to one 4-mile-long zone along the north side of the pool, about 5 miles south of Silver Springs. It is estimated that a water volume equivalent to about 8 percent of the daily flow of Silver Springs will enter the Summit Pool each day from the southern one-third of the Silver Springs drainage area. A like amount will reenter the aquifer at the main zone of outflow and move toward Silver Springs at an estimated average velocity of about 200 feet per day, if something close to the natural static stage of the pool is maintained by return pumpage of the lockage losses. At a velocity of 200 feet per day, water from the Summit Pool would discharge at Silver Springs about 140 days later. However, any estimate of velocity in the highly cavernous limestone aquifer in the area should be used with caution, because difficult to measure changes in porosity and thickness of major zones of flow may cause large variations in velocity. If all lockage losses are returned to the Summit Pool by pumping from Eureka Pool, no net loss from the Silver Springs drainage area, except for some evaporation from the water surface in the canal and possible leakage around locks, will result from canal operations. The zone of outflow from the Summit Pool to the aquifer will be in a natural potentiometric trough, and the zone of inflow will be in a potentiometric ridge area. The equilibrium water level in the pool will tend to be about 1 foot higher than the altitude of the lowest level in the pre-canal potentiometric trough, and about 2 feet lower than the highest level on the pre-canal potentiometric ridge. West of the Silver Springs drainage area just east of Dunnellon Lock, in the area of a local potentiometric high, the water level in the Summit Pool is expected to be about 15 feet below the natural potentiometric surface. In most areas 2 to 3 miles away from the Summit Pool, effects of the canal on the natural potentiometric surface should be slight. The stage of the Summit Pool, judging from the 36-year record for ground-water level changes and the anticipated indirect effect of the controlled stage in Eureka Pool, should have a maximum of about 10.5 feet with a maximum water level of about 51.5 feet above mean sea level and a minimum of about 41.0 feet above mean sea level. Of particular importance in the Summit Pool is an implementation of well planned construction and operational procedures designed to minimize risks of ground-water contamination.

Florida↗
USGS2025

Grammar to graph—An approach for semantic transformation of annotations to triples

Data annotation is the process of labeling data to show the outcome that a related data model should predict. In this study, annotation data were transformed into semantic graph triples, mainly for use with the Resource Description Framework (RDF), a type of entity-relationship-attribute data model for graph databases. The transformation of annotation data to semantic graph triples provides complex linguistic meaning with data handling advantages such as reduced data storage needs, improved logical specification of relations between objects, and reusable classes and properties that support logic and inference. A grammar-based framework in graph form supports user questions and queries. The words defining approximately 334 topographic feature types compiled by the U.S. Geological Survey were tokenized as units of analysis and grouped by part of speech. Their dependency relations were identified for this study using natural language processing libraries. Dependency concepts are used as structured semantic relations among part-of-speech classes. Tokens, units equivalent to words, form instances of classes and were quantified within a tabular output format using PostgreSQL data storage software. Table data were logically aligned as triples following a mapping file and stored with an ontology file using Ontop virtual triplestore software. A grammar ontology schema for the data was synchronized to match queries whose results validated the graph’s structure. The text analysis produced 8 part-of-speech classes of content words for object representations and 4 classes of function words for operational applications. Dependency relations formed 27 ontology properties for topographic subgraph structures. Token occurrences shaped overall ontology salience and formed a lexicon of syntactic terms for subgraph objects and properties. The schema ontology of class and property population shapes formed the lexicon of English terms. SPARQL Protocol and RDF Query Language (SPARQL) was used with the lexicon to conform data to RDF guidelines. This study confirms the hypothesis that although linguistic logic varies from description logic, its approximation applies to ontology design. Property and query use case patterns extracted from the analysis support queries concerning complex topographic relations and patterns normally embedded within text definitions. The method used in this study could be applied to text forms in other domains, such as survey notes.

Scientific Investigations Report↗
USGS2026

Use of precariously balanced rocks to constrain postglacial earthquake magnitudes in New England, United States

We use the age and fragility of 13 precariously balanced rocks (PBRs) in Massachusetts, New Hampshire, and southwestern Maine to evaluate the estimated probabilistic seismic hazard (PSH) from the U.S. Geological Survey’s National Seismic Hazard Model (NSHM), and also develop a map of maximum postglacial earthquake magnitudes in the region. The PBRs are erratic boulders left behind by the retreat of the Laurentide ice sheet between 13 and 18 ka, and published ice retreat maps are used to estimate their fragility ages. The fragilities and ages of the rocks appear to be consistent with the NSHM, in that the estimated earthquake magnitudes and resulting ground motions that would topple them are only expected on timescales longer than their fragility ages. This result, on the North American passive margin, contrasts with PBR studies at active plate boundaries, where the PBR constraints imply large reductions to estimated PSH. It may be that the PBRs are not old enough in the eastern United States to reveal the same PSH modeling issues as those revealed in the plate boundary settings. The study provides constraints on maximum magnitudes of postglacial earthquakes across much of Massachusetts, New Hampshire, and southwestern Maine, with the constraints limited to the ages of the PBRs.

Maine. Massachusetts, New Hampshire↗
USGS2024

Volcanic gas monitoring

Introduction As magma rises through the crust, decreasing pressure conditions allow volatiles to exsolve from the magma. These volatiles then migrate upward through the crust, where they can be stored at shallower levels or escape to the atmosphere. Rising magma also heats rock masses beneath volcanic centers, causing water in shallow aquifers and hydrothermal systems to boil and release additional gases and steam (see chapter F , this volume; Ingebritsen and Hurwitz, 2024). The chemistry and quantity of gases that reach the surface during periods of quiescence or volcanic unrest can reveal that gas-rich magma is ascending, crystallizing, or alternatively stalling, with important implications for volcanic hazard (for example, Sutton and others, 1992; Aiuppa and others, 2007, 2021; Werner and others, 2009, 2011, 2012; Moretti and others, 2013; de Moor and others, 2016; Lewicki and others, 2019; Edmonds and others, 2022; Kern and others, 2022; Kunrat and others, 2022). Most volcanoes in Alaska and the western United States are characterized by weak degassing, with one or more low-temperature fumaroles (typically near the local boiling temperature of water) and connect to a deeper and sometimes extensive hydrothermal system (for example, McGee and others, 2001; Symonds and others, 2003a, b). Hydrothermal systems will affect the chemistry of rising gases exsolved from deeper magma (Symonds and others, 2001), including sulfur dioxide (SO 2 ), hydrogen chloride (HCl), and water vapor (for example, Doukas and Gerlach, 1995; Gerlach and others, 1998, 2008; Symonds and others, 2001; Werner and others, 2013). As an example, depending on factors such as temperature, pressure, and oxidation state, rising SO 2 will react with groundwater to form hydrogen sulfide (H 2 S) gas, dissolved sulfate (SO 4 2− ), or elemental sulfur (Christenson, 2000; Symonds and others, 2001; Werner and others, 2008). The reaction and dissolution of SO 2 into shallow groundwater is commonly referred to as scrubbing, and can reduce the likelihood that ascending, degassing magma can be detected. Carbon dioxide, however, in addition to exsolving from magma early in the ascent process, is not easily removed by hydrothermal fluids (Lowenstern, 2001). As scrubbing and other processes take place, the SO 2 /H 2 S, CO 2 /SO 2 , and CO 2 /H 2 S ratios may change. High rates of SO 2 emission indicate that magma has moved to relatively shallow levels in the volcano and that the system has heated up enough to establish dry pathways from depth to the surface. Monitoring multiple gas species and the total output of those species is thereby useful for volcano monitoring during both periods of quiescence, to establish background degassing conditions, and during unrest, when gas geochemistry and emission rates can provide information on changing conditions, such as magma ascent. To provide context for multidisciplinary volcano forecasts, we focus on the following two key required capabilities: (1) characterizing baseline geochemistry and gas discharge from volcanoes and volcanic regions and (2) monitoring changes in gas geochemistry and discharge to inform forecasts of volcanic eruptions and their effects. Sufficient baseline data must be collected to identify and interpret anomalous degassing associated with volcanic unrest (for example, Sorey and others, 1998; Rouwet and others, 2014). Differences in volcano type, baseline degassing rates, local hydrology, and geography (for example, high versus low latitude) will result in a different baseline for each volcano. Volcanoes of any threat level that exhibit one or more degassing phenomena would ideally be monitored by techniques needed to establish baseline degassing data, with the sampling frequency of baseline data dictated by the threat level (table E1). Additional monitoring techniques become necessary during periods of unrest. In general, three of the most important techniques for gas monitoring are (1) direct sampling of fumarole, spring, and soil gases for laboratory geochemical measurements, (2) measurements of the chemical composition of the volcanic plume and emission rates of major gas species (for example, H 2 O, CO 2 , SO 2 , and H 2 S) by satellite, airborne, or ground-based techniques, and (3) measurements of diffuse emissions of CO 2 and other gases through soils. Various methods and instruments may be useful both for baseline studies and during unrest.

Scientific Investigations Report↗
USGS1999

The mineral economy of Brazil--Economia mineral do Brasil

This study depicts the Brazilian government structure, mineral legislation and investment policy, taxation, foreign investment policies, environmental laws and regulations, and conditions in which the mineral industry operates. The report underlines Brazil's large and diversified mineral endowment. A total of 37 mineral commodities, or groups of closely related commodities, is discussed. An overview of the geologic setting of the major mineral deposits is presented. This report is presented in English and Portuguese in pdf format.

Data Series↗
USGS2025

Simulated effects of future water availability and protected species habitat in a perennial wetland, Santa Barbara County, California

This study evaluates the potential water availability in Barka Slough and the effects of changing hydrological conditions on the aquatic habitat of five protected species. Barka Slough is a historically perennial wetland at the downstream western end of the San Antonio Creek Valley watershed (SACVW). A previously published hydrologic model of the SACVW for 1948–2018 was extended to include 2019–2021 and then modified to simulate the future years of 2022–2051. Two models simulating the future years of 2022–2051 were constructed, each with different climate inputs: (1) a repeated historical climate and (2) a 2070-centered Drier Extreme Warming climate (2070 DEW). The model with the 2070 DEW climate had warmer temperatures and an increase in average annual precipitation driven by larger, albeit more infrequent, precipitation events than the model with the historical climate. Simulated groundwater pumpage resulted in cumulative groundwater storage depletion and groundwater-level decline in Barka Slough in both future models. The simulations indicate that Barka Slough may transition from a perennial to an ephemeral wetland. Streamflow, stream disconnection, and depth to groundwater are key habitat metrics for federally listed species in Barka Slough. Future seasonal conditions for each metric are more likely to affect federally listed species’ habitats under 2070 DEW climatic conditions. Future seasonal streamflow volume may negatively impact unarmored threespine stickleback ( Gasterosteus aculeatus williamsoni ) and tidewater goby ( Eucyclogobis newberryi) habitats. Future seasonal stream disconnection may negatively impact the unarmored threespine stickleback habitat. Future groundwater-level decline may negatively impact Gambel’s watercress ( Nasturtium gambelii ) and La Graciosa thistle ( Cirsium scariosum var. loncholepis ) habitats and could influence the ability to use Barka Slough as a restoration or reintroduction site for these species. Results from this study can be used to inform water management decisions to sustain future groundwater availability in the SACVW.

California↗
USGS2024

From exploration to production: Understanding the development dynamics of lithium mining projects

Recently, there has been considerable recent controversy whether current and new lithium mines will be able to supply the rapidly growing needs of the electromobility transition. Mineral exploration projects are typically active for many years, and only some become operational mines. From exploration to production, the projects go through several stages of characterisation and evaluation. At each stage, decisions are made by companies and stakeholders to advance, continue or stop the project. This is a complex process, and even projects with very similar geological and technical characteristics may take very different trajectories, depending on external factors such as global market conditions and local regulatory environments. The present study investigates the dynamics of this process for lithium exploration projects. A global database of 397 lithium projects was compiled, covering their progression through major development stages between 2004 and 2022. Ordinal logistic regression was used for the statistical analysis of this data. Different explanatory variables were tested, including economic, geological, technical, and geographic factors, to identify the best predictors for project progress at each development stage. The results suggest an essential role for lithium carbonate prices, and a variable role for other factors at each stage. Critically, the already elapsed lead time and project economics, which are traditionally considered important for the prediction of the start-up of individual mines, do not appear to be relevant in all cases. The results provide important insights into the dynamics of lithium supply and may eventually allow more realistic forecasts to be made for future lithium market dynamics.

Resources Policy↗
USGS2024

Groundwater, surface-water, and water-chemistry data, Black Mesa area, northeastern Arizona—2019–2021

The Navajo (N) aquifer is an extensive aquifer and the primary source of groundwater in the 5,400-square-mile Black Mesa area in northeastern Arizona. Water availability is an important issue in the Black Mesa area because of the arid climate, past industrial water use, and continued water requirements for municipal use by a growing population. Precipitation in the area typically ranges from less than 6 to more than 16 inches per year, depending on location. The U.S. Geological Survey water-monitoring program in the Black Mesa area began in 1971 and provides information about the long-term effects of groundwater withdrawals from the N aquifer for industrial and municipal uses. This report presents the results of data collected as part of the monitoring program in the Black Mesa area from calendar years 2020–2021 and, additionally, uses streamflow statistics from November and December 2019. The monitoring program includes measurements of (1) groundwater withdrawals (pumping), (2) groundwater levels, (3) spring discharge, (4) surface-water discharge, and (5) groundwater chemistry. In calendar year 2020, total groundwater withdrawals were estimated to be 2,680 acre-feet (acre-ft), and, in 2021, total withdrawals were estimated to be 2,570 acre-ft. Total withdrawals during 2021 were about 65 percent less than total withdrawals in 2005 because the Peabody Western Coal Company discontinued its use of water to transport coal in a coal slurry pipeline after 2005 and ceased mining operations in 2019. Owing to Navajo Nation and Hopi Reservation access restrictions during the Coronavirus pandemic, water levels were not collected from municipal wells in 2020 or 2021. Water levels measured in 2021 from wells completed in the unconfined areas of the N aquifer within the Black Mesa area showed a decline in 7 of 13 wells when compared with water levels from the prestress period (prior to 1965). The changes in water levels across all 13 wells ranged from +8.4 feet (ft) to −42.4 ft, and the median change was −0.4 ft. Water levels also showed decline in 11 of 12 wells measured in the confined area of the aquifer when compared to the prestress period. The median change for the confined area of the aquifer was −25.9 ft, with changes across all 12 wells ranging from +17.3 ft to −133.7 ft. Spring flow was measured at four springs between 2020 and 2021. Flow fluctuated during the period of record for Burro Spring and Pasture Canyon Spring, but a decreasing trend was statistically significant (p<0.05) at Moenkopi School Spring and Unnamed Spring near Dennehotso, Arizona. Discharge at Burro Spring has remained relatively constant since it was first measured in the 1980s, and discharge at Pasture Canyon Spring has fluctuated for the period of record. Continuous records of surface-water discharge in the Black Mesa area were collected from streamflow-gaging stations at the following sites: Moenkopi Wash at Moenkopi 09401260 (1976–2021), Dinnebito Wash near Sand Springs 09401110 (1993–2020), Polacca Wash near Second Mesa 09400568 (1994–2020), and Pasture Canyon Springs 09401265 (2004–2021). Median winter flows (November through February) of each winter were used as an estimate of the amount of groundwater discharge at the above-named sites. For the period of record, the median winter flows have generally remained constant at Polacca Wash and Pasture Canyon Springs, whereas a decreasing trend was observed at Moenkopi Wash and Dinnebito Wash. In 2020 and 2021, water samples were collected from a total of four springs in the Black Mesa area and analyzed for selected chemical constituents. Results from the four springs were compared with previous analyses from the same springs. Dissolved solids, chloride, and sulfate concentrations increased at Moenkopi School Spring during the more than 30 years of record at that site. Concentrations of dissolved solids and sulfate at Pasture Canyon Spring have not varied significantly (p>0.05) since the early 1980s, and there is no increasing or decreasing trend in those data. However, concentrations of chloride from Pasture Canyon Spring show a diminishing trend. Concentrations of dissolved solids, chloride, and sulfate at Unnamed Spring near Dennehotso have varied for the period of record, but there is no statistical trend in the data. Concentrations of dissolved solids at Burro Spring have varied for the period of record, but there is no statistical trend in the data. However, concentrations of chloride and sulfate from Burro Spring show a trend towards lower concentrations.

Arizona↗
USGS2026

Numerical modeling of Late Pleistocene to Holocene earthquake-induced progressive rock slope damage in the paraglacial Serpentine valley, Prince William Sound, Alaska

Landslides in deglaciating fjords pose a potential tsunami threat to nearby communities; however, processes contributing to long-term progressive rock damage and landslide conditioning remain poorly constrained in paraglacial settings. Here, we analyse the role of earthquake-induced rock mass damage over late Pleistocene to Holocene time scales, as a conditioning factor for modern landslides, using distinct element numerical modelling to assess spatial and temporal patterns of fracture propagation influenced by varying glacier thickness. Conceptualised numerical models were parameterised by in situ rock mass, glacial and topographic conditions in Serpentine valley, located in Prince William Sound, Alaska, where several large landslides are actively developing along the western valley wall. Results show that although rigid glacier buttressing reduces co-seismic rock mass damage, it does not suppress it completely, and damage occurs both above and below the glacier surface elevation. We demonstrate that topography, and especially steep slopes with topographic convexity, as well as preexisting damage of joint networks and faults inherited from tectonic and exhumation induced stresses, exert primary control on the location of new co-seismic damage. Simulations representing a simplified deglaciation sequence over the past 25 ka, with a series of 10 evenly spaced earthquakes, generated rock mass damage patterns that qualitatively match in situ landslide structural and kinematic observations at one instability in Serpentine valley. Our conceptual study helps clarify the role of repeated seismicity over glacial timescales as a long-term conditioning process for paraglacial rock slope failure, highlighting spatial and temporal patterns of progressive damage accumulation, with outcomes relevant for modern landslide hazard assessment.

Alaska↗
USGS2025

Using visualization science to inform the design of environmental decision-support tools—A case study of the U.S. Geological Survey Waterwatch

Environmental decision-support tools are increasingly being used to serve both expert and non-expert audiences. Many existing tools are primarily expert-focused, and redesigning them can be challenging because experts and non-experts interact with tools differently, existing users may be resistant to changes, and there is little guidance on how to prioritize redesign efforts and demonstrate their efficacy. In this report, we present a case study of a user-centered redesign of an established environmental decision-support tool—the U.S. Geological Survey WaterWatch. WaterWatch supports flood, drought, and other water resource management decisions through the display of water levels at gages across the United States. Using a participatory process, we identified a functional change (replacing the existing rainbow colormap), created an alternative design, and tested the alternative’s usability through two general public surveys. The results showed that replacing the rainbow colormap with a more intuitive diverging colormap improves usability, regardless of the audience’s subjective preference for the rainbow color scheme. In addition, we demonstrated the importance of using legends to improve the audience’s understanding of the map symbols. This study demonstrates how user-centered design approaches can be used to inform the design of high-profile products and tools.

Scientific Investigations Report↗
USGS2024

Constraining the earthquake recording threshold of intraslab earthquakes with turbidites in southcentral Alaska’s lakes and fjords

Strong ground motion from intraslab earthquakes, which do not produce primary paleoseismic evidence, may initiate gravity-driven turbidity flows in subaqueous basins. The resulting deposits (turbidites) can provide a paleoseismic proxy if the conditions that initiate these flows are known. To better constrain the initiating conditions, we use two recent intraslab earthquakes in southcentral Alaska, the M w 7.1 30 November 2018 Anchorage earthquake and the M w 7.1 24 January 2016 Iniskin earthquake, as calibration events. Through a multilake investigation, we document the occurrence, or the absence, of earthquake-generated turbidity flows from these two events. Both earthquakes are recorded by centimeter-scale turbidites that can be differentiated from climatically generated deposits, as well as other seismic sources based on deposit thickness, sedimentological properties, and deposit age. We show that a Modified Mercalli Intensity (MMI) of ∼V–V1/2 is the minimum shaking intensity required to generate localized sediment remobilization from deltaic slopes, and an MMI of ∼V1/2 is required to produce a deposit of sufficient thickness that a seismic origin can be confidently assigned. The documentation of seismically generated deposits in quick succession (∼2 years) with diagnostic features highlights the utility of using recent earthquakes as calibration events to investigate the subaqueous response to strong ground motion.

Alaska↗
USGS2026

Ground-motion aleatory-variability models for Puerto Rico and the U.S. Virgin Islands

I develop independent logic trees for aleatory variability for crustal and subduction-zone (interface and intraslab) earthquakes for seismic hazards analyses in Puerto Rico and the U.S. Virgin Islands (PRVI) from existing suites of ground-motion models (GMMs) and from ground-motion datasets, including a regional PRVI dataset. The aleatory variability models are parameterized using a partially nonergodic partitioning of standard deviation that consists of independently developed between-event ( ), site-to-site ( ), and event-corrected single-station ( ) standard deviation components. The effects of nonlinear site response on aleatory variability are incorporated through additional terms that modify the standard deviation components. Because one goal of this work is to develop independent logic trees for aleatory variability that synthesize the aleatory variability models from GMMs, I make use of the functional forms of the input GMMs. The PRVI dataset contains a limited number of stations with high-quality site metadata and does not contain records from earthquakes with magnitudes greater than 6.1, so I choose not to develop the aleatory variability models from the regional dataset alone. Instead, the standard deviation components from regional ground-motion data are evaluated against the components derived from GMMs and from available global datasets, and regionalized standard deviation components are incorporated where there is evidence that regional effects exhibit substantial differences. The resulting logic trees for aleatory variability consist of models of and that are consistent with semiempirical GMMs for active crustal and subduction-zone regimes, and two alternative models of , including one model that exhibits site-to-site variability informed by PRVI data, with values that exceed global models. The aleatory variability models may be considered in future hazards assessments in PRVI to simplify the hazard calculations, to incorporate regional ground-motion variability effects, and to enable direct logic-tree weighs of aleatory variability.

Puerto Rico, U.S. Virgin Islands↗
USGS1976

The water quality of Livingston Reservoir on the Trinity River, Southeastern Texas

The concentrations of dissolved solids, chloride, and sulfate in Livingstone Reservoir on the Trinity River in southeastern Texas usually average less than 250 mg/1 (milligrams per litre), 40 mg/1, and 50 mg/1, respectively. The water is usually hard or moderately hard (61 to 180 mg/1 as calcium carbonate). The concentrations of principal dissolved constituents in the reservoir are usually maximum during summer and fall when evaporation is high and inflow is low. Thermal stratification of the reservoir usually begins in March and persists until September or October. Neither the seasonal variation of dissolved constituents in inflow to the reservoir nor thermal stratification has resulted in significant stratification of the principal dissolved constituents. However, thermal stratification has resulted in significant seasonal and areal variations of dissolved oxygen, which results in higher concentration of dissolved iron, dissolved manganese, total phosphorus, and total inorganic nitrogen.

Texas↗
USGS2025

A time-space model of graphite mineral systems

Increasing demand for graphite in energy storage systems warrants review of graphite ore genesis in a mineral systems framework. Orogenic graphite encompasses the metamorphic and orogenic mineral systems that produce flake graphite and hydrothermal vein (lump and chip) graphite deposits, respectively. A common feature of orogenic graphite deposits is an association with upper amphibolite- to granulite-facies metasedimentary rocks in continent-continent or continent-island arc collisional orogens. Orogenic flake graphite deposits form primarily through graphitization of organic carbon during regional metamorphism, but strain localization and partial melting of pelitic protoliths are likely important processes for graphite grade and quality enrichment. Orogenic vein graphite deposits precipitate from hydrothermal fluids, possibly derived from metamorphism or anatexis at depth. Decarbonation reactions in mixed calcareous-carbonaceous metasedimentary sequences are the most likely carbon sources for the veins. In contrast, intrusion-related graphite includes magmatic-hydrothermal and metamorphic mineral systems that form primarily in continental arc settings via the interaction of magmas with carbonaceous sedimentary packages. Magmatic-hydrothermal flake graphite deposits are hosted in plutonic and volcanic rocks, and result from the exsolution of CO 2 -CH 4 -rich fluids from melts contaminated by such packages. Contact metamorphism of carbonaceous sedimentary rocks by plutons produces some microcrystalline (amorphous) graphite deposits, including many in China. Compilation of geologic data from known graphite deposits globally suggests that pulses of carbon deposition in the Paleoproterozoic, Mesoproterozoic, and Neoproterozoic provided source carbon material. Subsequent supercontinent orogenesis at ca. 2,100 to 1,700 Ma (Columbia), ca. 1,300 to 1,000 Ma (Rodinia), and ca. 650 to 500 Ma (Gondwana) resulted in the genesis of orogenic flake and vein graphite deposits, where favorable geologic components overlapped with organic ± carbonate carbon-rich strata. Cryogenian deposition of graphite protoliths and Cryogenian – Cambrian metamorphic mineralization account for nearly 75% of all known resources globally and coincide with profound carbon isotope excursions and climate variability, implying a link with the global carbon budget. Comparatively few graphite deposits are associated with Pangea-forming orogens, attributed to less exhumation and/or denudation. High-temperature metasedimentary belts containing organic carbon-rich protoliths are most favorable for hosting orogenic flake graphite deposits, whereas sequences that also contain carbonate protoliths are favorable for orogenic graphite veins. Continent-scale orogenic belts may host both deposit types along with vanadium deposits. Use of a time-space mineral systems framework for graphite deposits can improve exploration models needed to ensure future supply of this critical mineral and provide insights into Earth’s long-term carbon cycle.

Mineralium Deposita↗
USGS2024

Identifying transportation data and system needs for a Federal lands transportation data platform

Executive Summary Modern transportation and land-use planning efforts include information from many sources to address topics such as safety, efficiency, commercial, and social needs. This wide breadth of topics provides opportunities for collaboration and development of common tools for diverse users. In many cases, different information systems provide the spatial data and geographic content necessary for transportation and land-use planners to consider multiple lines of evidence. The Federal Highway Administration Office of Federal Lands Highway (FLH) and Federal Land Management Agency partners use detailed spatial and quantitative data to inform transportation decisions. However, logistic challenges to data sharing exist because data are often managed by separate agencies; data-exchange frameworks and interagency data agreements are insufficient; and consistency from aggregated data requires maintenance, coordination, and supporting infrastructure. The FLH and U.S. Geological Survey collaboratively examined (1) use and availability of spatial data for transportation planning and (2) a possible mechanism to use more shared and consistent data in a common planning environment. The goals of this collaborative effort were to describe data needs from the perspective of planners and to identify opportunities for shared data resources. Results presented here focus on two workshops and a subsequent investigation of data and tools available from partner agencies. The objectives of this report are to (1) describe information used in transportation planning with geographic data; (2) identify spatially explicit data that inform transportation plans and could be shared among all partners; and (3) describe current platforms, planning and administrative opportunities, and potential barriers to developing an integrated planning tool. Key information and data needs were identified in three major classes: system, user, and influential factors. System data are parts of the transportation network and information about the condition of individual segments and the network. User data provide details about the function of the system and insights into potential needs; for example, user trips between source and destinations inform road and network demands that can lead to congestion and safety issues (in the future, user data might also include scenarios and projections based on land-use plans). Influential data represent social and environmental factors that influence transit demands and network conditions. These factors could be popular locations or seasonal events that influence demand and congestion; wildlife habitat or migration intersections that affect safety and management priorities; or geologic features that influence hazards, maintenance, and safety. Responses described here provide specific information for web-tool design and give a framework for interagency communication and cooperation to address specific information needs for integrated planning. Existing web-mapping and web-services, and the data that inform them, are also described. Commonly, these data are created and published by one agency, and the core users are outside of that agency; for example, threatened species distributions are published by the U.S. Fish and Wildlife Service for consideration by planners in advance of National Environmental Policy Act (42 U.S.C. 4321 et seq.) evaluation. This report is provided to inform FLH leaders and Federal Land Management Agency partners by articulating user needs and requirements for integrated planning tool(s). Programmers creating a secure web-based data-sharing platform (with data-viewing, -analysis and -download functions) can use the information presented here to organize data and user interfaces. This integrated perspective can help FLH and Federal Land Management Agency partners develop transportation networks that better serve the needs of people in local communities and across States and the Nation.

Open-File Report↗