USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geothermics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60Linked to original sources

Geophysical investigation of the Denali fault and Alaska Range orogen within the aftershock zone of the October–November 2002, M = 7.9 Denali fault earthquake

The aftershock zone of the 3 November 2002, M = 7.9 earthquake that ruptured along the right-slip Denali fault in south-central Alaska has been investigated by using gravity and magnetic, magnetotelluric, and deep-crustal, seismic reflection data as well as outcrop geology and earthquake seismology. Strong seismic reflections from within the Alaska Range orogen north of the Denali fault dip as steeply as 25°N and extend to depths as great as 20 km. These reflections outline a relict crustal architecture that in the past 20 yr has produced little seismicity. The Denali fault is nonreflective, probably because this fault dips steeply to vertical. The most intriguing finding from geophysical data is that earthquake aftershocks occurred above a rock body, with low electrical resistivity (>10 Ω·m), that is at depths below ∼10 km. Aftershocks of the Denali fault earthquake have mainly occurred shallower than 10 km. A high geothermal gradient may cause the shallow seismicity. Another possibility is that the low resistivity results from fluids, which could have played a role in locating the aftershock zone by reducing rock friction within the middle and lower crust.

Alaska↗

Dissolved gases in hydrothermal (phreatic) and geyser eruptions at Yellowstone National Park, USA

Multiphase and multicomponent fluid flow in the shallow continental crust plays a significant role in a variety of processes over a broad range of temperatures and pressures. The presence of dissolved gases in aqueous fluids reduces the liquid stability field toward lower temperatures and enhances the explosivity potential with respect to pure water. Therefore, in areas where magma is actively degassing into a hydrothermal system, gas-rich aqueous fluids can exert a major control on geothermal energy production, can be propellants in hazardous hydrothermal (phreatic) eruptions, and can modulate the dynamics of geyser eruptions. We collected pressurized samples of thermal water that preserved dissolved gases in conjunction with precise temperature measurements with depth in research well Y-7 (maximum depth of 70.1 m; casing to 31 m) and five thermal pools (maximum depth of 11.3 m) in the Upper Geyser Basin of Yellowstone National Park, USA. Based on the dissolved gas concentrations, we demonstrate that CO 2 mainly derived from magma and N 2 from air-saturated meteoric water reduce the near-surface saturation temperature, consistent with some previous observations in geyser conduits. Thermodynamic calculations suggest that the dissolved CO 2 and N 2 modulate the dynamics of geyser eruptions and are likely triggers of hydrothermal eruptions when recharged into shallow reservoirs at high concentrations. Therefore, monitoring changes in gas emission rate and composition in areas with neutral and alkaline chlorine thermal features could provide important information on the natural resources (geysers) and hazards (eruptions) in these areas.

Idaho, Montana, Wyoming↗

Fault zone characteristics and basin complexity in the southern Salton Trough, California

Ongoing oblique slip at the Pacific–North America plate boundary in the Salton Trough produced the Imperial Valley (California, USA), a seismically active area with deformation distributed across a complex network of exposed and buried faults. To better understand the shallow crustal structure in this region and the connectivity of faults and seismicity lineaments, we used data primarily from the Salton Seismic Imaging Project to construct a three-dimensional P-wave velocity model down to 8 km depth and a velocity profile to 15 km depth, both at 1 km grid spacing. A V P = 5.65–5.85 km/s layer of possibly metamorphosed sediments within, and crystalline basement outside, the valley is locally as thick as 5 km, but is thickest and deepest in fault zones and near seismicity lineaments, suggesting a causative relationship between the low velocities and faulting. Both seismicity lineaments and surface faults control the structural architecture of the western part of the larger wedge-shaped basin, where two deep subbasins are located. We estimate basement depths, and show that high velocities at shallow depths and possible basement highs characterize the geothermal areas.

California↗

Heat Flow and Hydrologic Characteristics at the AND-1B borehole, ANDRILL McMurdo Ice Shelf Project, Antarctica

The Antarctic Drilling Program (ANDRILL) successfully drilled and cored a borehole, AND-1B, beneath the McMurdo Ice Shelf and into a flexural moat basin that surrounds Ross Island. Total drilling depth reached 1285 m below seafloor (mbsf) with 98 percent core recovery for the detailed study of glacier dynamics. With the goal of obtaining complementary information regarding heat flow and permeability, which is vital to understanding the nature of marine hydrogeologic systems, a succession of three temperature logs was recorded over a five-day span to monitor the gradual thermal recovery toward equilibrium conditions. These data were extrapolated to true, undisturbed temperatures, and they define a linear geothermal gradient of 76.7 K/km from the seafloor to 647 mbsf. Bulk thermal conductivities of the sedimentary rocks were derived from empirical mixing models and density measurements performed on core, and an average value of 1.5 W/mK ± 10 percent was determined. The corresponding estimate of heat flow at this site is 115 mW/m2. This value is relatively high but is consistent with other elevated heat-flow data associated with the Erebus Volcanic Province. Information regarding the origin and frequency of pathways for subsurface fluid flow is gleaned from drillers' records, complementary geophysical logs, and core descriptions. Only two prominent permeable zones are identified and these correspond to two markedly different features within the rift basin; one is a distinct lithostratigraphic subunit consisting of a thin lava flow and the other is a heavily fractured interval within a single thick subunit.

Geosphere↗

Slab-rollback ignimbrite flareups in the southern Great Basin and other Cenozoic American arcs: A distinct style of arc volcanism

In continental-margin subduction zones, basalt magmas spawned in the mantle interact with the crust to produce a broad spectrum of volcanic arc associations. A distinct style of very voluminous arc volcanism develops far inland on thick crust over periods of 10–20 m.y. and involves relatively infrequent caldera-forming explosive eruptions of dominantly calc-alkaline rhyolite, dacite, and trachydacite with repose times of 10 4 –10 6 yr. Volumes of individual eruptions are large (10 2 –10 3 km 3 ), and nested super-eruptions of thousands of cubic kilometers are common. Calderas are as much as 60–75 km in diameter, and surrounding individual ignimbrite outflow sheets extend outward as much as 150 km, blanketing upwards of 10 5 km 2 . Little or no basalt is extruded, whereas andesitic differentiates coeval with silicic ignimbrites range from minor to dominant in relative volume. A common feature in these flareups is essentially nonextending, thick, inland crust overlying a subducting oceanic plate with transverse tears that rolled back to a steeper dip from a previously flat configuration. Lithospheric delamination is locally possible. Large volumes of basalt that provide heat and mass for silicic magma generation in the crust form by fluid fluxing of the growing mantle wedge overlying the steepening dehydrating slab and from asthenospheric decompression. Variations in the mantle input, together with variations in crustal thickness, temperature, and composition, modulate the expression of the flareups. As a consequence of the high flux of mantle-derived magma into the thick crust, geotherms become elevated, and the brittle-ductile transition can rise to depths as shallow as 7 km. At this transition, diapirically rising magmas from a melting, assimilation, storage, and homogenization (MASH) zone are blocked and spread laterally into discoid chambers that grow until a thermomechanical threshold is attained, triggering climactic eruption and caldera collapse. This ignimbrite flareup style of continental arc volcanism is exemplified by the mid-Cenozoic southern Great Basin ignimbrite province; other examples include the contemporaneous Southern Rocky Mountain, Mogollon-Datil, vast Sierra Madre Occidental volcanic fields, and the late Cenozoic Altiplano-Puna volcanic complex in the Central Andes. Rhyolitic and trachydacitic ignimbrites typically have erupted, but where the crust was predominantly felsic, prewarmed, and orogenically thickened, well-developed MASH zones have spawned multiple super-eruptions of phenocryst-rich dacite, or monotonous intermediates, and smaller volumes of calc-alkaline rhyolite ignimbrite. In the Great Basin, eruptions of dry, hot trachydacite magma followed the monotonous intermediates. Partial melting in thinner crust with a major mafic component yielded more alkalic rhyolite and related trachydacite.

Nevada, Utah↗

Pleistocene hydrothermal activity on Brokeoff volcano and in the Maidu volcanic center, Lassen Peak area, northeast California: Evolution of magmatic-hydrothermal systems on stratovolcanoes

Partially eroded stratovolcanoes worldwide, notably Mounts Rainier and Adams in the Cascades and several volcanoes in Japan, record episodic periods of eruption and geothermal activity that produce zones of hydrothermal alteration. The partly eroded core of late Pleistocene Brokeoff volcano on the south side of Lassen Peak exposes the upper 1 km of multiple ancient (ca. 410–300 ka) magmatic-hydrothermal alteration zones in a 3.5 by 5 km area that allows characterization of the three-dimensional hydrothermal evolution of the volcano. Both acid- and neutral-pH hydrothermal solutions produced distinctive alteration mineral assemblages in close proximity. Early hydrothermal activity is characterized by alunite-rich alteration that is temporally and spatially related to shallow intrusions in the center of the volcano. Younger acid alteration and a large area of neutral-pH alteration formed along the volcano’s flanks. The neutral-pH alteration is vertically zoned over 1000 m from shallow zeolite ± adularia through intermediate argillic (smectite-pyrite ± illite) to deep propylitic (chlorite-calcite-albite-illite) alteration. Pleistocene alteration is partly overprinted by surficial, steam-heated alteration related to Lassen’s modern hydrothermal activity. A large (∼3.5 km 2 ), shallow (≤300 m), ca. 1.5 Ma alunite-rich magmatic-hydrothermal alteration zone is exposed on the northeast flank of the nearby Maidu volcanic center.

California↗

Crustal studies using magnetic data

The magnetic method plays an important role in mineral, petroleum, and geothermal exploration. It also has made important contributions to geologic mapping, structural geology, and plate-tectonic theory. In particular, magnetic measurements using aircraft provide a relatively inexpensive way to trace magnetic rock units beneath covered areas, to reveal the shape of subsurface magnetic bodies, and to interpolate subsurface geologic information between widely spaced seismic data and other localized geophysical measurements. Computerized interpretation procedures currently fall into two categores: techniques designed to enhance the data, which include various display and filtering procedures, and modeling experiments, which may be either forward (trial-and-error) or inverse in nature.

GSA Memoirs↗

Apatite fission-track evidence of widespread Eocene heating and exhumation in the Yukon-Tanana Upland, interior Alaska

We present an apatite fission-track (AFT) study of five plutonic rocks and seven metamorphic rocks across 310 km of the Yukon–Tanana Upland in east-central Alaska. Samples yielding ~40 Ma AFT ages and mean confined track lengths > 14 µm with low standard deviations cooled rapidly from >120°C to <50°C during a 3–5 Ma period, beginning at about 40 Ma. Data from samples yielding AFT ages >40 Ma suggest partial annealing and, therefore, lower maximum temperatures (~90–105°C). A few samples with single-grain ages of ~20 Ma apparently remained above ~50°C after initial cooling. Although the present geothermal gradient in the western Yukon–Tanana Upland is ~32°C/km, it could have been as high as 45°C/km during a widespread Eocene intraplate magmatic episode. Prior to rapid exhumation, samples with ~40 Ma AFT ages were >3.8–2.7 km deep and samples with >50 Ma AFT ages were >3.3–2.0 km deep. We calculate a 440–320 m/Ma minimum rate for exhumation of all samples during rapid cooling. Our AFT data, and data from rocks north of Fairbanks and from the Eielson deep test hole, indicate up to 3 km of post-40 Ma vertical displacement along known and inferred northeast-trending high-angle faults. The predominance of 40–50 Ma AFT ages throughout the Yukon–Tanana Upland indicates that, prior to the post-40 Ma relative uplift along some northeast-trending faults, rapid regional cooling and exhumation closely followed the Eocene extensional magmatism. We propose that Eocene magmatism and exhumation were somehow related to plate movements that produced regional-scale oroclinal rotation, northward translation of outboard terranes, major dextral strike-slip faulting, and subduction of an oceanic spreading ridge along the southern margin of Alaska.

Alaska↗

Fission-track dating of the tectonic development of the San Juan Islands, Washington

The San Juan Islands of Washington State form a geologically complex province located between the north Cascades, Vancouver Island, and the Olympic Peninsula. We have obtained 53 fission-track dates from the San Juan Islands province that help constrain its late Paleozoic to early Cenozoic tectonic and sedimentary history and its relationship to neighboring geologic terranes. The San Juan Islands can be divided into two main blocks separated by the Haro fault. South of the Haro fault, complexly deformed, metamorphosed, and probably exotic early Paleozoic to early Late Cretaceous rocks form four imbricate thrust plates separated by south- and east-dipping late Early to Late Cretaceous thrust faults. Reset zircon fission-track dates indicate that thrusting may have produced an upside-down geothermal gradient in the uppermost plate, the Decatur terrane. If present, this gradient was probably produced by conductive or frictional heating associated with a now-eroded overlying thrust fault and hot thrust plate. Cretaceous thrusting in the southern San Juan Islands was accompanied by uplift and resetting of apatite fission-track dates. In contrast to correlative rocks of the southern San Juan Islands, Upper Triassic to Lower Cretaceous rocks in and north of the Haro fault zone are essentially unmetamorphosed and only broadly folded. Apatite dates from the Upper Triassic Haro Formation and the Upper Jurassic and Lower Cretaceous Spieden Group indicate they did not participate in Late Cretaceous uplift of the southern San Juan Islands. Together with their basement (the Wrangellia terrane?), these rocks probably acted as a backstop to thrusting. The synorogenic Late Cretaceous Nanaimo basin formed north of the Haro fault in front of the advancing San Juan Islands thrust system. The age of Nanaimo deposition matches uplift (apatite) dates in the southern San Juan Islands, and detrital zircons from the Nanaimo Group yield dates consistent with southern San Juan Islands sources. Burial led to resetting of apatite dates in what is probably the deeper part of the Nanaimo basin.

Washington↗

Dissolved inorganic nitrogen composition, transformation, retention, and transport in naturally phosphate-rich and phosphate-poor tropical streams

The composition, transformation, and transport of dissolved inorganic nitrogen (DIN) was compared in waters associated with two lowland streams in Costa Rica. The Salto River is enriched by geothermal-based soluble reactive phosphorus (SRP), which raises the concentration up to 200 μg/L whereas Pantano Creek, an unimpacted tributary, has an SRP concentration <10 μg/L. Ammonium concentration in springs adjacent to the Salto and Pantano was typically greater than channel water (13 of 22 locations) whereas nitrate concentration was less (20 of 22 locations). Ground waters were typically high in ammonium relative to nitrate whereas channel waters were high in nitrate relative to ammonium. Sediment slurry studies indicated nitrification potential in two sediment types, firm clay (3.34 μg N∙cm −3 ∙d −1 ) and uncompacted organic-rich sediment (1.76 μg N∙cm −3 ∙d −1 ). Ammonium and nitrate amendments to each stream separately resulted in nitrate concentrations in excess of that expected after correction for dilution using a conservative tracer. SRP concentration was not affected by DIN amendment to either stream. SRP concentration in the Pantano appeared to be regulated by abiotic sediment exchange reactions whereas DIN composition and concentration were regulated by a combination of biotic and abiotic processes.

Canadian Journal of Fisheries and Aquatic Sciences↗

Anthropogenic vs. natural pollution: An environmental study of an industrial site under remediation (Naples, Italy)

Heavy metal concentrations and Pb isotopic composition were determined in the soils, slags, scums and landfill materials from a shut down industrial (brownfield) site. This was the second largest integrated steelworks in Italy, and is now under remediation by a Government project. It is located in the outskirts of Napoli on the Bagnoli-Fuorigrotta plain (BFP), which is part of the Campi Flegrei (CF) volcanic caldera, where many spas and geothermal springs occur. The purpose of this work is to distinguish the natural (geogenic) component, originated by hydrothermal activity, from anthropogenic contamination owing to industrial activity. 'In-situ sediments' (soils), slags, scums and landfill materials from 20 drill-cores were selected from a network of 197 drills carried out on a 100 ?? 100 m grid, covering the entire brownfield site. In general, heavy metal enrichments in the upper 3 m of the cores strongly suggest mixing between natural (geogenic) and anthropogenic components. Pb isotopic data are suggestive of three potential end members, and confirm the existence of a strong natural component in addition to contamination from anthropogenic activities. The slags, scums and landfill materials have been proved, through mineralogy and leachate experiments, to be geochemically stable; this shows that metal pollutants are not bio-available and, hence, do not pose a risk to future developments on this site. The natural contribution of hydrothermal fluids to soil pollution, in addition to the non-bio-availability of metal pollutants from industrial materials, indicate that heavy metal remediation of soils in this area would be of little use. Continuous discharge from mineralized hydrothermal solutions would cancel out any remediation effort.

Geochemistry: Exploration, Environment, Analysis↗

Major occurrences and reservoir concepts of marine clathrate hydrates: Implications of field evidence

This paper is part of the special publication Gas hydrates: relevance to world margin stability and climatic change (eds J.P. Henriet and J. Mienert). Questions concerning clathrate hydrate as an energy resource, as a factor in modifying global climate and as a triggering mechanism for mass movements invite consideration of what factors promote hydrate concentration, and what the quintessential hydrate-rich sediment may be. Gas hydrate field data, although limited, provide a starting point for identifying the environments and processes that lead to more massive concentrations. Gas hydrate zones are up to 30 m thick and the vertical range of occurrence at a site may exceed 200 m. Zones typically occur more than 100m above the phase boundary. Thicker zones are overwhelmingly associated with structural features and tectonism, and often contain sand. It is unclear whether an apparent association between zone thickness and porosity represents a cause-and-effect relationship. The primary control on the thickness of a potential gas hydrate reservoir is the geological setting. Deep water and low geothermal gradients foster thick gas hydrate stability zones (GHSZs). The presence of faults, fractures, etc. can favour migration of gas-rich fluids. Geological processes, such as eustacy or subsidence, may alter the thickness of the GHSZ or affect hydrate concentratiion. Tectonic forces may promote injection of gas into the GHSZ. More porous and permeable sediment, as host sediment properties, increase storage capacity and fluid conductivity, and thus also enhance reservoir potential.

Geological Society Special Publication↗

Application of optical-fiber temperature logging - An example in a sedimentary environment

Continuous‐temperature depth logs, especially when recorded in boreholes under thermal equilibrium conditions, provide detailed information of the subsurface thermal structure, which is necessary for the determination of reliable heat‐flow and rock thermal properties. In conjunction with independent thermal‐conductivity determinations, thermal logging data also allow the separation of heat conduction effects from thermal convection effects by fluid flow driven by various pressure differences such as pore fluid pressure. The Earth's thermal field is related intimately to geothermal resources and hydrocarbon resources. Therefore, the characterization of temperature in the subsurface and its relationship to lithology is of critical importance.

Geophysics↗

The historical development of the magnetic method in exploration

The magnetic method, perhaps the oldest of geophysical exploration techniques, blossomed after the advent of airborne surveys in World War II. With improvements in instrumentation, navigation, and platform compensation, it is now possible to map the entire crustal section at a variety of scales, from strongly magnetic basement at regional scale to weakly magnetic sedimentary contacts at local scale. Methods of data filtering, display, and interpretation have also advanced, especially with the availability of low-cost, high-performance personal computers and color raster graphics. The magnetic method is the primary exploration tool in the search for minerals. In other arenas, the magnetic method has evolved from its sole use for mapping basement structure to include a wide range of new applications, such as locating intrasedimentary faults, defining subtle lithologic contacts, mapping salt domes in weakly magnetic sediments, and better defining targets through 3D inversion. These new applications have increased the method's utility in all realms of exploration - in the search for minerals, oil and gas, geothermal resources, and groundwater, and for a variety of other purposes such as natural hazards assessment, mapping impact structures, and engineering and environmental studies.

Geophysics↗

Summer of Applied Geophysical Experience (SAGE): Training for our future geoscientists

Energy and natural resources are crucial to the sustainability of worldwide economies, security, and overall well-being. However, the future workforce in the energy and natural-resources sector is at risk, and meeting the challenges of this dwindling workforce requires well-educated geoscientists in exploration and applied geophysics and related geoscience and technology disciplines. Programs such as geophysical field courses that are supported by SEG and industry, in partnership with academic institutions and government laboratories, are important approaches to maintaining and enhancing expertise in exploration geophysics. One example of a geophysical field course devoted to educating our future workforce is the Summer of Applied Geophysical Experience (SAGE), a four-week program based in Santa Fe, New Mexico, designed to actively engage students in all phases of applied geophysical research. SAGE is a unique educational experience that combines teaching and research as a partnership among universities, industry, government agencies, and professional societies. SAGE teaches the principles and applications of refraction and reflection seismology, magnetics, gravity, GPS, heat flow, several electromagnetic (EM) methods, and ground-penetrating radar (GPR) in a field-based, hands-on setting. More than 850 students and qualified professionals have attended SAGE, many of whom have gone on to become leaders in academia, industry, and government. SAGE students are exposed to the exciting challenges that face earth scientists today, and they develop skills that are necessary to address the world's growing energy demands. Examples of SAGE research projects include mapping archaeological sites and tectonic structure and investigating water and geothermal resources in the Rio Grande rift.

Leading Edge (Tulsa, OK)↗

Use of relational databases to evaluate regional petroleum accumulation, groundwater flow, and CO2 sequestration in Kansas

Large-scale relational databases and geographic information system tools are used to integrate temperature, pressure, and water geo-chemistry data from numerous wells to better understand regional-scale geothermal and hydrogeological regimes of the lower Paleozoic aquifer systems in the mid-continent and to evaluate their potential for geologic CO2 sequestration. The lower Paleozoic (Cambrian to Mississippian) aquifer systems in Kansas, Missouri, and Oklahoma comprise one of the largest regional-scale saline aquifer systems in North America. Understanding hydrologic conditions and processes of these regional-scale aquifer systems provides insight to the evolution of the various sedimentary basins, migration of hydrocarbons out of the Anadarko and Arkoma basins, and the distribution of Arbuckle petroleum reservoirs across Kansas and provides a basis to evaluate CO2 sequestration potential. The Cambrian and Ordovician stratigraphic units form a saline aquifer that is in hydrologic continuity with the freshwater recharge from the Ozark plateau and along the Nemaha anticline. The hydrologic continuity with areas of freshwater recharge provides an explanation for the apparent underpressure in the Arbuckle Group. Copyright ?? 2005. The American Association of Petroleum Geologists. All rights reserved.

American Association of Petroleum Geologists Bulle↗

Simulations of the origin of fluid pressure, fracture gen­ eration, and the movement of fluids in the Uinta Basin, Utah

The Altamont oil field in the deep Uinta basin is known to have reservoir fluid pressures that approach lithostatic. One explanation for this high pore-fluid pressure is the generation of oil from kerogen in the Green River oil shale at depth. A three-dimensional simulation of flow in the basin was done to test this hypothesis. In the flow simulation, oil generation is included as a fluid source. The kinetics of oil generation from oil shale is a function of temperature. The temperature is controlled by (1) the depth of sediment burial and (2) the geothermal gradient. Using this conceptual model, the pressure buildup results from the trade-off between the rate of oil generation and the flow away from the source volume. The pressure increase depends primarily on (1) the rate of the oil-generation reaction and (2) the permeability of the reservoir rocks. A sensitivity analysis was performed in which both of these parameters were systematically varied. The reservoir permeability must be lower than most of the observed data for the pressure to build up to near lithostatic. The results of the simulations indicated that once oil generation was initiated, the pore pressure built up rapidly to near lithostatic. We simulated hydrofractures in that part of the system in which the pressures approach lithostatic by increasing both the horizontal and the vertical permeability by an order of magnitude. Because the simulated hydrofractures were produced by the high pore pressure, they were restricted to the Altamont field. A new flow system was established in the vicinity of the reservoir; the maximum pore pressure was limited by the least principal stress. Fluids moved vertically up and down and laterally outward away from the source of oil generation. The analysis indicated that, assuming that one is willing to accept the low values of permeability, oil generati n can account for the observed high pressures at Altamont field.

AAPG Bulletin↗

Hydrocarbon source rock evaluation of Middle Proterozoic Solor Church Formation, North American Mid-Continent Rift System, Rice County, Minnesota

Hydrocarbon source rock evaluation of the Middle Proterozoic Solor Church Formation (Keweenawan Supergroup) as sampled in the Lonsdale 65-1 well, Rice County, Minnesota, shows that: (1) the rocks are organic matter lean (24 of 25 samples have less than 0.8% organic carbon); (2) the organic matter is thermally post-mature, probably near the transition between the wet gas phase of catagenesis and metagenesis (dry gas zone); and (3) the rocks have minimal potential for producing additional hydrocarbons (genetic potential < 0.30 mg HC/g rock). Although no direct evidence exists from which to determine maximum burial depths, the observed thermal maturity of the organic matter requires significantly greater burial depths, a higher geothermal gradient, or both. It is likely, t least on the Saint Croix horst, that thermal maturation of the organic matter in the Solor Church took place relatively early, and that any hydrocarbons generated during this early phase were probably lost prior to deposition of the overlying Middle Proterozoic Fond du Lac Formation (Keweenawan Supergroup).

Minnesota↗