SEARCH · USGS Science

Results for “Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60Linked to original sources

USGS1970

Seismic activity in the Sunnyside mining district, Carbon and Emery Counties, Utah, during 1968

More than 20,000 local earth tremors were recorded by the seismic monitoring network in the Sunnyside mining district during 1968. This is about 40 percent of the number of tremors recorded by the network in 1967. In 1968 a total of 281 tremors were of sufficient magnitude to be located accurately--about 50 percent of the number of tremors in 1967 that were located accurately. As in previous years, nearly all the earth tremors originated near, or within a few thousand feet of, the mine workings. This distribution indicates that mine-induced stress changes caused most of the seismic activity. However, over periods of weeks and months there were significant changes in the distribution of seismic activity caused by tremors that were not directly related to mining but probably were caused by adjustment of natural stresses 6r by a complex combination of both natural and mine-induced stress changes. In 1968 the distribution of tremor hypocenters varied considerably with time, relative to active mining areas and to faults present in the mine workings. During the first 6 months, most tremors originated along or near faults that trend close to or through the active mine workings. However, in the last 6 months, the tremor hypocenters tended to concentrate in the rock mass closer to, or around, the active mining areas. This shift in concentration of seismic activity with time has been noted throughout the district many times since recording began in 1963, and is apparently caused by spontaneous releases of stored strain energy resulting from mine-induced stress changes. These spontaneous releases of strain energy, together with rock creep, apparently are the mechanism of adjustment within the rock mass toward equilibrium conditions, which are continually disrupted by mining. Although potentially hazardous bumps were rare in the Sunnyside mining district during 1968, smaller bumps and rock falls were more common in a given active mining area whenever hypocenters of larger-magnitude earth tremors concentrated near it.

Open-File Report↗

USGS1973

Summary of seismic activity and its relation to geology and mining in the Sunnyside mining district, Carbon and Emery Counties, Utah, during 1967-1970

In the Sunnyside mining district, Utah, coal is mined under thick and variable overburden which is locally weakened by faults and other structural discontinuities. Stress changes and local stress concentrations produced by mining under these conditions often cause sudden and violent ruptures in the coal and surrounding rock mass. The strain energy released by this type of failure, which can produce shock waves and may discharge coal and rock with explosive force, is often a serious threat to life and property. These releases of strain energy are called bumps or bounces by miners if they occur in the coal, and rock bursts if they occur in the surrounding rock mass. Many of these releases are so violent that they generate seismic waves that can be felt, or at least detected by seismic instruments, miles from the site of the rupture, whereas others are smaller and can be detected only by those sensitive seismic instruments within a few thousand feet of the site of the rupture. In 1969 and 1970, about 27,000 and about 15,000 earth tremors, respectively, were recorded by the five-station seismic monitoring network that is located at the surface and encompasses most of the mine workings in the district. Of these totals, 512 and 524 earth tremors, respectively, were of sufficient magnitude (greater than 1. 5 on the Richter scale) so that the hypocenters could be accurately located. In 1968 about 20,000 tremors were recorded, with 281 large enough to plot, but in 1967 over 50,000 were recorded, of which 540 were plotted. In this report we discuss the way in which seismic activity, geology, and mining are related or seem to be related for the period 1967 through 1970, with emphasis on the period 1969-70. We also suggest certain mining procedures which, based on studies during the period, might increase the safety and efficiency of mining operations in the Sunnyside district. A complete tabulation of the larger magnitude earth tremors which occurred during 1969-70 and descriptions of how they relate to mining are given in the appendix. Similar tabulations and descriptions for 1967 and 1968 are available in earlier reports (Barnes and others, 1969; Dunrud and others, 1970).

Open-File Report↗

USGS1976

Physical constraints on sounds generated by very small earthquakes

Vertical vibrations of the ground surface due to elastic waves from an earthquake will generate acoustic pressure waves in the overlying atmosphere. Sufficiently intense vibrations of the ground at frequencies greater than about 20 HZ can produce pressure waves that are within the audible range of many animals, including humans. People in the epicentral region of moderate to large earthquakes, for instance, commonly relate hearing sounds accompanying individual earthquakes (here we exclude sounds associated with mechanical resonances in structures such as houses). Descriptions of these sounds range from the report of distant guns to the rumble of thunder or the rushing of a wind (Davison, 1938; Lanchow Seismological Brigade, Appendix II). In many instances, the sounds are described as starting several seconds before the earthquake is felt. Experimental and theoretical verification that such earthquake sounds are generated by high-frequency ground motion from local earthquakes is based on simultaneous acoustic and seismic recordings recently obtained during a swarm of earthquakes in the Imperial Valley, California (Hill and others, 1976). These results show that for local earthquakes in the magnitude range 2 to-3, audible sounds are generated by the first arriving compressional (P) wave while perceptible shaking begins with the larger but slower shear (S) wave, explaining the reports that "earthquake sounds" are frequently heard several seconds before the earthquake is felt. A commonly proposed explanation for alleged anomalous animal behavior hours to days prior to large earthquakes suggests that animals with acute, high-frequency hearing respond to weak '''ultrasonic" sounds generated by small earthquakes occurring in the epicentral region of the impending event. Such earthquakes are presumably too small to be either felt or heard by humans in the region and too small to be routinely recognized as earthquakes on seismograms recorded on a local seismograph network. Evidence that such "popping and cracking" may occur in the region of an impending earthquake comes from laboratory experiments in which the rate of microfracturing in a rock sample subjected to large stress differences increases dramatically before catastrophic failure of the sample (Scholz, 1968; Stesky, 1975). In this paper we investigate the following question: What are the constraints on earthquake size (fault dimension and displacement) and hypocentral distance (distance from the earthquake focus to a point on the Earth's surface) such that animals noted for their acute hearing might react to the sound generated by the event while the same event would go undetected by humans (either by feeling, hearing, or routine identification on a local seismograph network)? Factors to be considered include: 1) the nature of the displacement spectral amplitudes of elastic waves radiated from an earthquake, 2) the effects of attenuation on the spectral components of elastic (seismic) waves over propagation paths from the focus to the Earth's surface, 3) the appropriate scaling of spectral amplitudes from moderate to very small earthquakes, 4) the coupling of elastic waves in the Earth to acoustic waves in the atmosphere, and 5) the threshold-of-hearing characteristics for various animals, including man. In considering these factors, we will find that, except for extremely small, shallow "earthquakes" (fracture dimension on the order of 10 cm and focal depths on the order of 10 m), acoustic emissions from premonitory fracturing ought to be equally audible to both people and animals in the immediate area of the fracturing.

Open-File Report↗

USGS1976

Preliminary space image lineament maps of Alaska

Examination of images from Nimbus, NOAA and Landsat satellites has revealed a series of lineaments in the earth's surface in Alaska 1000 km or more in length (fig. 1). These lineaments occur as alinements of surface geologic structures, linear valleys or ridges, and linear changes in tonal contrast marking differences in soil type, soil moisture, or vegetation. The lineaments are believed to represent the surface traces of zones of weakness deep within the earth's crust along which vertical or horizontal adjustments to earth stresses persistently recurred since at least Precambrian time. A consistent pattern in the lineaments can be discerned in Alaska (fig. 1D), and throughout the North American Cordillera (fig. 2). This pattern is believed to represent a mosaic of crustal blocks, whose differential movements have guided the tectonic development of the Cordillera. Areas in which mineral deposits are known to be concentrated are alined along many of the lineaments or occur at lineament intersections, suggesting that the zones of weakness reflected by the lineaments provided felicitous pathways for upward movement of mineralizing agents. Other lineaments bound areas of high mineral concentration suggesting that some crustal blocks have had a tectonic history more favorable for mineralization than others. These conclusions suggest that the study of space image lineaments can provide new and fruitful approaches to the search for concealed mineral deposits. In Alaska, some lineaments coincide in part with active fault traces and some separate areas of significantly different structure and geologic history. However, the movements along the zones of weakness which these lineaments are believed to reflect have been too slow and spread over too many millions of years for the lineaments to be considered as marking zones of present earthquake hazard. Detailed discussion of the lineaments, and of interpretations as to their meaning, are contained in: 1) a paper presented by Lathram and Raynolds at the First William T. Pecora Memorial Symposium, Sioux Falls, South Dakota, October 28-31, 1975, and 2) Lathram and Albert, 1976, Significance of space image linears in Alaska, in Hodgson, R.A., Gay, S.P., and Benjamins, J.Y., eds., Proceedings of the First International Conference on the New Basement Tectonics: Utah Geol. Assoc. Pub. 5, p. 11-26.

Alaska↗

USGS1978

Characteristics of the Landsat Multispectral Data System

Landsat satellites were launched into orbit in 1972 and 1975. Additional Landsat satellites are planned for launch in 1978 and 1981. The satellites orbit the Earth at an altitude of approximately 900 km and each can obtain repetitive coverage of cloud-free areas every 18 days. A sun-synchronous orbit is used to insure repeatable illumination conditions. Repetitive satellite coverage allows optimal cover conditions for geologic applications to be identified. Seasonal variations in solar illumination must be analyzed to select the best Landsat data for geologic applications. Landsat data may be viewed in stereo where there is sufficient sidelap and sufficient topographic relief. Landsat-1 ceased operation on January 10, 1978. Landsat-2 detects, only solar radiation that is reflected from the Earth's surface in visible and near-visible wavelengths. The third Landsat will also detect emitted thermal radiation. The multispectral scanner (MSS) was the only sensing instrument used on the first two satellites. The MSS on Landsats-1 and -2 detect radiation which is reflected from a 79 m by 79 m area, and the data are formatted as if the measurement was made from a 56 m by 79 m area. The MSS integrates spectral response from all cover types within the 79 m by 79 m area. The integrated spectral signature often does not resemble the spectral signature from individual cover types, and the integrated signature is also modified by the atmosphere. Landsat-1 and -2 data are converted to 70 mm film and computer compatible tapes (CCT's) at Goddard Space Flight Center (GSFC); these are shipped to the EROS Data Center (EDC) for duplication and distribution to users. Landsat-C data will be converted to 241 mm-wide film and CCT's at EDC. Landsat-D data will be relayed from the satellite directly to geosynchronous satellites and then to the United States from any location on Earth.

Open-File Report↗

USGS1978

Tin and related elements in sediments and beach sands from Afghanistan, Iran, and Turkey

Sixty samples of sediments from stream beds, outwash plains, and beaches were collected in Afghanistan, Iran, and Turkey by Fred L. Klinger, U.S. Bureau of Mines, as part of the field work undertaken by the National Geographic-Smithsonian Pyrotechnological Expedition of 1968. Facilities for the analysis of the samples for tin and other metals were not immediately available, but in 1973 arrangements were made for analyses to be made on a time-permitting basis in the U.S. Geological Survey. The original purpose in collecting the samples was to determine whether tin was present in amounts indicative of sources for tin ores used in antiquity for the manufacture of bronze. The results of the analyses not only permitted an evaluation of the potential for tin in the localities sampled, but also afforded chemical and mineralogical data that were interpretable in the context of regional potential for other elements of current industrial use. These include gold, base metals, ferro-alloy metals, beryllium, rare earths, and barium. The original 60 samples of sand were sieved to make three size fraction (>0.707 mm, <O.707->O.177 mm, and <0.177 mm) for spectrographic and chemical analysis. Splits of these fractions were used for replicate analyses to permit evaluation of the precision of the analytical procedures. Further splitting of the <0.707->0.177 mm sand gave fractions from each sample that were separated in bromoform. Concentrates from the heavy-liquid separations were divided magnetically into six parts from most magnetic to least magnetic. These concentrates were analyzed spectrographically. The precision of the spectrographic analyses is well within the limits of precision expected from semiquantitative procedures. Such precision allows semiquantitative spectrographic procedures to be used with confidence as a valuable tool for reconnaissance investigations in which multi-element analyses are necessary. The analyses of the various fractions of sediments and sediment concentrates indicate the sample media in which an element was most likely to occur. Tin exhibited no preferential concentration into any particular medium. However, many elements with which tin is associated, and other elements of industrial use, do concentrate into one or more of the sample media. This indication of a preferred medium permits interpretation of the analyses as to the best sample medium for a particular element in the environment of western Asia. Cassiterite and/or tin were detected in many samples from Afghanistan, Iran, and Turkey, but in most of the samples the tin was present in normal crustal abundance. Sixteen samples, including seven from Afghanistan, eight from Iran, and one from Turkey contain unusually large amounts of tin. The most notable areas of anomalous tin are near Mirzaka, Qala-i-Asad, and Shah Agha in Afghanistan; near Meshed, Shir Kuh, Natanz, Nodus, and Talmesi in Iran; and on the shore of the Balck Sea just west of Trabzon in Turkey. Even in these localities the tin appears to be a minor element associated with other ores. The most common association of tin is with copper at known mineralized areas. This relation may have historical significance in the context of the development of bronze. The results of the analyses provided geochemical data on the distribution of other elements of industrial use and clearly identified nine of the ten known mineral deposits represented by the samples. The known metallization at the reported deposits may be only a part of more complex groups of metals. In Afghanistan an array of anomalous elements at the known gold placers around Mirzaka and along the Anguri River signals the presence of complex ore deposits. These elements are silver, arsenic, gold, bismuth, cadmium, copper, mercury, indium, molybdenum, lead, antimony, tin, thallium, tungsten, and zinc. They may indicate a Carlin-type gold deposit in which the wall-rocks are enriched in micron-sized particles of gold. Other localities in Afghanistan signalled by the results of the analyses to be anomalous and to merit further geochemical exploration are: (1) a reach of the Panjshir River for beryllium, lead, zinc, chromium and nickel; (2) the area near Bamian for beryllium; (3) the Siakhak village area for gold and copper; (4) around Qala-i-Asad and Shah Agha for lead, zinc, gold, and tungsten. Some attention to the distribution of monazite around Siakhak, Shahjui, Qala-i-Asad, and Shah Agha is justified to determine if this ore mineral for the rare earths and thorium is enriched over its normally expectable trace as an accessory mineral in granitic rocks, pelitic schists, and gneisses. In Iran, the pluton of granodiorite porphyry near Sar Cheshmeh, an area where a huge porphyry copper deposit was being investigated by the Geological Survey of Iran when the present samples were collected in 1968, shows as a strong geochemical anomaly for copper and molybdenum. The granitic area near Meshed is geochemically enriched persistently in beryllium, tin, and barium, and locally in gold, lanthanum, niobium, yttrium, and other elements. This area deserves a thorough regional geochemical survey for beryl and nonberyl sources of beryllium, for fluorite, and for the ores of niobium, tin, barium, the rare earths, and thorium. Other localities in Iran that merit geochemical exploration on the basis of these data are: ;1) the areas between Tabas and Deyhuk, east of Naiband, and south of Naiband for barium and zinc; (2) a locality about midway between Kerman and Sirdjan for barium, lanthanum, strontium, and zinc; (4) the Meskani copper mine area for mercury, lead, and nickel as well as copper; (5) the Talmesi copper mine area for such other elements as barium, cobalt, mercury, strontium, and zinc; (6) a small pluton of granodiorite north of Natanz for tungsten and base metals; (7) the vicinity of Zendjan for auriferous polymetallic sufide deposits; (8) gold in the gorge 15 km east of Miyaneh; and (9) the area near Nodus for gold, base metals, molybdenum, and niobium, and possibly uranium. The Harsit River basin in Turkey appears to be a suitable target for geochemical exploration for gold and low-temperature hydrothermal deposits of base metals, barium, and mercury.

Open-File Report↗

USGS1979

Abundance and distribution of thorium in the carbonatite stock at Iron Hill, Powderhorn District, Gunnison County, Colorado

The carbonatite stock at Iron Hill is part of an alkalic complex of Cambrian or latest Precambrian age containing pyroxenite, uncompahgrite, ijolite, nepheline syenite, and related rocks characterized by their subsilicic composition and by their lack of calcic plagioclase. Thorium averages 36.2 parts per million (ppm) Th (0.0041 percent Th0 2 ) in the carbonatite, which also contains considerably more Ba, Ce, Nd, La, Nb, P, Mn, Mo, Sr, U, and rare-earth elements than average igneous rocks. Thorium content of the carbonatite ranges from 6 ppm Th (0.0007 percent Th0 2 ) 150 ppm Th (0.017 percent Th0 2 ), and several areas of anomalous concentration are apparent. The distribution of thorium is not the same as the distribution of niobium and rare-earth elements. Thorium abundances of the level found in the carbonatite at Iron Hill are of little economic interest unless considered as a byproduct of potential niobium, rare-earth, and uranium exploitation.

Colorado↗

USGS1980

Water-level monitoring along San Andreas and San Jacinto faults, southern California, during fiscal year 1980

Beginning in October 1976, a program of water-level monitoring of abandoned water wells was initiated in the Palmdale area with the purpose of identifying possible water-level changes premonitory to a major earthquake on the San Andreas fault. In October 1977, the program was extended southeastward along the rift zone to the Valyermo area. In November 1977, the monitoring of water wells along the San Jacinto fault was initiated with the expectation of experiencing a moderate size earthquake while monitoring was in progress. Currently over thirty wells are being monitored. Eleven wells are monitored continuously with Stevens Type F recorders, two of which have been modified to operate with the Caltech Remote Observatory Support Systems (TIMS). The remaining wells are probed weekly, or in some cases semi-weekly or daily, by volunteers. We are endeavoring to improve the volunteer program by increasing the frequency of measurements and simplifying the procedure to minimize measurement errors. Weekly water-level data are displayed on computer-generated hydrographs for each well. Rainfall and earthquakes are plotted on the graphs for direct comparison with water levels. The hydrographs are updated and reviewed weekly. Weekly hydrographs are also prepared from recorder charts on two wells maintained by W. R. Moyle, Jr., of the U.S. Geological Survey, Water Resources Division Office, Laguna Niguel, California. A M5.5 earthquake occurred on 25 February 1980, between the Buck Ridge and San Jacinto strands of the San Jacinto fault zone, about 8 miles east-southeast of Anza. This is the largest earthquake which has occurred on the faults within our monitoring network. The Stevens recorder chart for well number 11S/6E-3N4 located in Borrego Valley about 20 miles southeast of the epicenter indicates that, during a period of about four hours on 21 February, the water level rose 1.5 to 1.6 feet and returned to its prior level. This is one of the most remarkable short-term water-level fluctuations observed during our monitoring program; it occurred about 88 hours prior to the earthquake. This well has been monitored since October 1977 and has had a Stevens recorder since October 1978. Long-term water levels have been remarkably steady compared to those in other wells we are monitoring. This well shows a strong response to earth tides. The Stevens record on a second well in Borrego Valley (11S/6E-1C1) showed a much smaller (0.1 foot) spike in water level at the same time as the spike in well number 11S/6E-3N4. Other continuously recording wells in Anza and Ocotillo Wells showed no identifiable water-level anomalies. The two wells in Borrego Valley which showed possible strain-induced water-level spikes appear to be more sensitive to earth tides than wells in the same area which did not show spikes in water level. We cannot conceive of any nontectonic cause for the spike on the Stevens record of well 11S/6E3N4. A creep event on the Coyote Creek fault about four miles from the well is one possibility. Because the spikes in the two wells in Borrego Valley are unique for the long-term record of these wells, they may represent precursors to the 25 February earthquake. Local seismic activity was also recorded in water levels of the two wells in Borrego Springs with continuous water-level recorders. One well showed peculiar high frequency water-level fluctuations from 22 July to 21 August 1980; since then the record has appeared normal. Several wells in the Palmdale-Valyermo area have shown peculiar changes in water level within the past year or so. The long-term hydrograph of well number 5N/12W-4H1 shows the most unusual behavior. The well showed no response to the 1977 and very heavy 1978 rainstorms, yet began to rise in early 1979 and continued to rise through the dry season of 1979. By comparison, most wells show a more normal seasonal response to rainfall. Eight wells in the Palmdale-Valyermo area have shown water-level changes which are different than would have been predicted from the previous history of water-level changes and seasonal rainfall. A longer period of observation is required to determine whether the changes are anomalous. Changes in the strain pattern and other geophysical phenomena have also been observed in southern California during about the same period as the water-level changes. If the water-level changes are the result of tectonic strain, the mechanism and significance are unknown. However, it is interesting that five of the eight wells with possibly anomalous water-level changes have been identified as good strain meters based on their response to earth tides. Six wells showing an unexpected rise in water level are located west of the earthquake swarm which occurred in 1976-1977 (McNally et al, 1978), whereas the two which show water levels lower than would have been predicted are located east of the earthquake swarm.

California↗

USGS1981

E-field ratio telluric survey near the Big Maria Mountains, Riverside County, California

The U.S. Geological Survey (USGS) under the Wilderness Act (Public Law 88-577) and the Federal Land Policy and Management Act (Public Law 94-579) has the responsibility, along with the U.S. Bureau of Mines, to survey certain areas in order to determine their mineral resource potential. This report presents results of three electric-field ratio telluric traverses conducted as part of the Bureau of Land Management Wilderness Program in the Big Maria Mountains, Riverside County, Calif. The telluric traverses were run on the southwest side of the Big Maria Mountains in an attempt to define the location of major buried faults near the eroded front of the range. E-field ratio tellurics is a descriptive name applied to the electrical exploration technique used in this survey. The telluric method refers to the measurement of the earth's electric field generated by induction from natural electromagnetic waves arriving at the surface. The E-field ratio telluric method uses a receiving array of three electrodes spaced equidistant and inline. This array is, in effect, two colinear dipoles sharing a common electrode. The potential difference across each dipole is then proportional to the component of the telluric field in the direction of the array. This configuration permits the measurement of the ratio of the telluric field at each dipole in the direction of the dipole line, and hence the name. The traverse data is extended by moving the three-electrode array forward one dipole length so that the forward electrode becomes the center electrode for the next ratio measurement. Electric-field data so obtained are proportional to the square root of the apparent resistivity of the earth at the location of the dipoles. However, because the apparent resistivity can be a function of the dipole direction, it is important to know the orientation of the dipoles with respect to major structures. Because the resistivity of fluid-saturated earth materials is largely dependent on the porosity of the rocks, the salinity of the pore fluid, and the presence of clays or similar material where surface conduction is high, alluvial fill, argillite and similar rocks tend to have low resistivities whereas igneous or high-grade metamorphic rocks have high resistivities. Variation in the electrical properties along a traverse may then be used to infer lithologic or structural changes.

California↗

USGS1983

A practical, low-noise coil system for magnetotellurics

Magnetotellurics is a geophysical technique which was developed by Cagnaird (1953) and Tikhonov (1950) and later refined by other scientists worldwide. The technique is a method of electromagnetic sounding of the Earth and is based upon the skin depth effect in conductive media. The electric and magnetic fields arising from natural sources are measured at the surface of the earth over broad frequency bands. An excellent review of the technique is provided in the paper by Vozoff (1972). The sources of the natural fields are found in two basic mechanisms. At frequencies above a few hertz, most of the energy arises from lightning in thunderstorm belts around the equatorial regions. This energy is propagated in a wave-guide formed by the earthionospheric cavity. Energy levels are higher at fundamental modes for this cavity, but sufficient energy exists over most of the audio range to be useful for sounding at these frequencies, in which case the technique is generally referred to as audio-magnetotellurics or AMT. At frequencies lower than audio, and in general below 1 Hz, the source of naturally occuring electromagnetic energy is found in ionospheric currents. Current systems flowing in the ionosphere generate EM waves which can be used in sounding of the earth. These fields generate a relatively complete spectrum of electromagnetic energy that extends from around 1 Hz to periods of one day. Figure 1 shows an amplitude spectrum characteristic of both the ionospheric and lightning sources, covering a frequency range from 0.0001 Hz to 1000 Hz. It can be seen that there is a minimum in signal levels that occurs at about 1 Hz, in the gap between the two sources, and that signal level increases with a decrease in frequency.

Open-File Report↗

USGS1986

Trace-element contents of postorogenic granites of the eastern Arabian Shield, Kingdom of Saudi Arabia

Trace-element contents for 46 postorogenic granitoids vary by as much as two orders of magnitude; most samples are strongly enriched in incompatible elements (such as the heavy rare earths, yttrium, niobium, and uranium) and depleted in the compatible elements (such as barium, strontium, scandium, europium, and cobalt). These trace-element characteristics are typical of A-type granites found in other areas of the world. In spite of the wide range in trace-element contents, no samples contained economically significant concentrations of a single element. Samples range from peralkaline to strongly peraluminous; most are weakly peraluminous or metaluminous. All three subgroups (peralkaline, metaluminous, and peraluminous) are enriched in uranium and hafnium and are depleted in compatible elements. The peralkaline granites are generally enriched in yttrium and niobium - the strongly peraluminous granites in rubidium and tantalum; both groups are also somewhat enriched in the heavy-rare-earth elements. Several of the peraluminous granites are known to be tin-bearing and, like tin-bearing granites found elsewhere in the world, their chondrite-normalized, rare-earth-element patterns are flat and have large negative europium anomalies. Samples from several plutons have very anomalous ratios for geochemically similar elements such as yttrium and holmium, niobium and tantalum, and zirconium and hafnium. These ratios may reflect differential complexing with a halogen-rich aqueous phase that may be characteristic of plutons that have been subjected to an ore-forming process. A program to test these hypotheses, through study of known mineralized areas and laboratory experiments, should be implemented. The regional trends for the chemical data and geochemical correlations over the large area sampled, suggest that the postorogenic granites were derived from a single protolith that formed by the mixing of oceanic sediments from the west, continental sediments from the east.

Open-File Report↗

USGS2000

Surveys of water velocities in the vicinity of the discharge-release gates of Salamonie Lake Dam, northeastern Indiana, spring and winter 1998

Two water-velocity surveys in the vicinity of the discharge-release gates were performed at the Salamonie Lake flood-control reservoir in northeastern Indiana during periods of high-discharge release. One survey was done in the spring when the reservoir pool was at high elevation; the other survey was in the winter when the reservoir pool was low. The maximum measured velocity was 2.4 feet per second for the spring survey and 1.9 feet per second for the winter survey. The maximum measured velocities occurred in the immediate vicinity of the spillway tower containing the discharge-release gates. Velocity-field magnitudes diminished rapidly with distance from the tower. Beyond an estimated 40 feet from the tower, velocity magnitudes were below 0.5 feet per second. For the spring and winter surveys, data were collected along four transects that were parallel to the face of the spillway tower. The transects were at the following approximate distances from the spillway tower: 900, 600, and 300 feet and as close to the tower as practical. For the spring and winter surveys, velocity-contour plots were produced for the transects closest to the tower. Plots were not made for the transects at 900-, 600-, and 300-foot intervals because velocities were negligible at these distances. An acoustic Doppler current profiler (ADCP) mounted on a boat was used to collect velocity and depth data and to compute positions of the velocity and depth data relative to the boat track. A global positioning system (GPS) was used to collect earth-referenced position data, and a GPS base station receiver was used to improve the accuracy of the earth-referenced position data. The earth-referenced position data were used to transform the ADCP-computed positions (which were relative to boat tracks) to positions referenced to a point on the spillway tower.

Indiana↗

USGS1999

An interpretation of the 1997 airborne electromagnetic (AEM) survey, Fort Huachuca vicinity, Cochise County, Arizona

Executive Summary -- In March of 1997, an airborne electromagnetic (AEM) survey of the Fort Huachuca Military Reservation and immediate surrounds (location map, http://geopubs.wr.usgs.gov/open-file/of99-007-b/index.jpg) was conducted. This survey was sponsored by the U.S. Army and contracted through the Geologic Division of the U.S. Geological Survey (USGS). Data were gathered by Geoterrex-Dighem Ltd. of Ottawa, Canada. The survey aircraft is surrounded by a coil through which a large current pulse is passed. This pulse induces currents in the Earth which are recorded by a set of three mutually perpendicular coils towed in a 'bird' about 100 m behind and below the aircraft. The bird also records the Earth's magnetic field. The system samples the Earth response to the electromagnetic pulse about every 16 m along the aircraft flight path. For this survey, the bulk of the flightpaths were spaced about 400 m apart and oriented in a northeast-southwest direction extending from bedrock over the Huachuca Mountains to bedrock over the Tombstone Hills. A preliminary report on the unprocessed data collected in the field was delivered to the U.S. Army by USGS in July 1997 (USGS Open-File Report 97?457). The final data were delivered in March, 1998 by the contractor to USGS and thence to the U.S. Army. The present report represents the final interpretive report from USGS. The objectives of the survey were to: 1) define the structure of the San Pedro basin in the Sierra Vista-Fort Huachuca-Huachuca City area, including the depth and shape of the basin, and to delineate large faults that may be active within the basin fill and therefore important in the hydrologic regime; 2) define near surface and subsurface areas that contain a large volume fraction of silt and clay in the basin fill and which both reduce the volume of available storage for water and reduce the permeability of the aquifer; and 3) to evaluate the use of the time domain electromagnetic method in the southwest desert setting as a means of mapping depth to water. Chapter one, written by M.E. Gettings, reports the results of the analysis of the aeromagnetic anomaly data. Depths to magnetic rocks computed from these data are in good agreement with depths from gravity anomaly models (Gettings and Houser, in prep.) and confirm and refine the location of the bedrock highs which reach to within 200 m of the surface in several parts of the study area. The highly faulted and generally shallow character of the basin within the study area deduced from the gravity studies is also evident in the aeromagnetic data. The caldera ring fault delimiting the buried structural southwest edge of the Tombstone caldera is expressed in the magnetic data and deeper intrusives extending outside the caldera to the southwest are inferred. Several magnetic bodies occur at shallow depths within the Precambrian granite of the Huachuca Mountains along the eastern foothills of the mountains. These are inferred to be Tertiary intrusives but remain to be confirmed by field work if any of their uppermost dikes or apotheses are exposed. Faults delineating the east-west trending bedrock high beneath the city of Sierra Vista appear to be shallow and should be investigated for surface expressions. Chapter two, written by Jeff Wynn, analyzes and interprets the conductivity depth transforms (CDTs) and provides a general evaluation of the data quality. He concludes that there is a good general correlation between the uppermost conductor seen in the CDTs and water table depth in many cases. Detailed comparisons between the ground-based vertical electric soundings (VES) and the CDTs are reported in this chapter. The two sets of data compare well in general for most sounding sites where the VES data are not noisy.

Arizona↗

USGS1999

An interpretation of the 1997 airborne electromagnetic (AEM) survey, Fort Huachuca vicinity, Cochise County, Arizona

In March of 1997, an airborne electromagnetic (AEM) survey of the Fort Huachuca Military Reservation and immediate surrounds was conducted. This survey was sponsored by the U.S. Army and contracted through the Geologic Division of the U.S. Geological Survey (USGS). Data were gathered by Geoterrex-Dighem Ltd. of Ottawa, Canada. The survey aircraft is surrounded by a coil through which a large current pulse is passed. This pulse induces currents in the Earth which are recorded by a set of three mutually perpendicular coils towed in a "bird" about 100 m behind and below the aircraft. The bird also records the Earth's magnetic field. The system samples the Earth response to the electromagnetic pulse about every 16 m along the aircraft flight path. For this survey, the bulk of the flightpaths were spaced about 400 m apart and oriented in a northeast-southwest direction extending from bedrock over the Huachuca Mountains to bedrock over the Tombstone Hills. A preliminary report on the unprocessed data collected in the field was delivered to the U.S. Army by USGS in July 1997 (USGS Open-File Report 97–457). The final data were delivered in March, 1998 by the contractor to USGS and thence to the U.S. Army. The present report represents the final interpretive report from USGS. The objectives of the survey were to: 1) define the structure of the San Pedro basin in the Sierra Vista-Fort Huachuca-Huachuca City area, including the depth and shape of the basin, and to delineate large faults that may be active within the basin fill and therefore important in the hydrologic regime; 2) define near surface and subsurface areas that contain a large volume fraction of silt and clay in the basin fill and which both reduce the volume of available storage for water and reduce the permeability of the aquifer; and 3) to evaluate the use of the time domain electromagnetic method in the southwest desert setting as a means of mapping depth to water.

Arizona↗

USGS2010

Glaciers of Asia

This chapter is the ninth to be released in U.S. Geological Survey Professional Paper 1386, Satellite Image Atlas of Glaciers of the World, a series of 11 chapters. In each of the geographic area chapters, remotely sensed images, primarily from the Landsat 1, 2, and 3 series of spacecraft, are used to analyze the specific glacierized region of our planet under consideration and to monitor glacier changes. Landsat images, acquired primarily during the middle to late 1970s and early 1980s, were used by an international team of glaciologists and other scientists to study various geographic regions and (or) to discuss related glaciological topics. In each glacierized geographic region, the present areal distribution of glaciers is compared, wherever possible, with historical information about their past extent. The atlas provides an accurate regional inventory of the areal extent of glacier ice on our planet during the 1970s as part of a growing international scientific effort to measure global environmental change on the Earth’s surface. The chapter is divided into seven geographic parts and one topical part: Glaciers of the Former Soviet Union (F–1), Glaciers of China (F–2), Glaciers of Afghanistan (F–3), Glaciers of Pakistan (F–4), Glaciers of India (F–5), Glaciers of Nepal (F–6), Glaciers of Bhutan (F–7), and the Paleoenvironmental Record Preserved in Middle-Latitude, High-Mountain Glaciers (F–8). Each geographic section describes the glacier extent during the 1970s and 1980s, the benchmark time period (1972–1981) of this volume, but has been updated to include more recent information. Glaciers of the Former Soviet Union are located in the Russian Arctic and various mountain ranges of Russia and the Republics of Georgia, Kyrgyzstan, Tajikistan, and Kazakstun. The Glacier Inventory of the USSR and the World Atlas of Ice and Snow Resources recorded a total of 28,881 glaciers covering an area of 78,938 square kilometers (km 2 ). China includes many of the mountain-glacier systems of the world including the Himalaya, Karakorum, Tien Shan and Altay mountain ranges. The glaciers are widely scattered and cover an area of about 59,425 km 2 . The mountain glaciers may be classified as maritime, subcontinental or extreme continental. In Afghanistan, more than 3,000 small glaciers occur in the Hindu Kush and Pamir mountains. Most glaciers occur on north-facing slopes shaded by mountain peaks and on east and southeast slopes that are shaded by monsoon clouds. The glaciers provide vital water resources to the region and cover an area of about 2,700 km 2 . Glaciers of northern Pakistan are some of the largest and longest mid-latitude glaciers on Earth. They are located in the Hindu Kush, Himalaya, and Karakoram mountains and cover an area of about 15,000 km 2 . Glaciers here are important for their role in providing water resources and their hazard potential. The glaciers in India are located in the Himalaya and cover about 8,500 km 2 . The Himalaya contains one of the largest reservoirs of snow and ice outside the polar regions. The glaciers are a major source of fresh water and supply meltwater to all the rivers in northern India, thereby affecting the quality of life of millions of people. In Nepal, the glaciers are located in the Himalaya as individual glaciers; the glacierized area covers about 5,324 km 2 . The region is the highest mountainous region on Earth and includes the Mt. Everest region. Glaciers in the Bhutan Himalaya have a total area of about 1,317 km 2 . Many recent glacier studies are focused on glacier lakes that have the potential of generating dangerous glacier lake outburst floods. Research on the glaciers of the middle-latitude, high-mountain glaciers of Asia has also focused on the information contained in the ice cores from the glaciers. This information helps in the reconstruction of paleoclimatic records, and the computer modeling of global climate change.

Professional Paper↗

USGS2002

Studies by the U.S. Geological Survey in Alaska, 2000

The collection of eight papers that follow continue the series of U.S. Geological Survey (USGS) investigative reports in Alaska under the broad umbrella of the geologic sciences. The series presents new and sometimes-preliminary findings that are of interest to earth scientists in academia, government, and industry; to land and resource managers; and to the general public. Reports presented in Studies by the U.S. Geological Survey in Alaska cover a broad spectrum of topics from various parts of the State (fig. 1), serving to emphasize the diversity of USGS efforts to meet the Nation's needs for earth-science information in Alaska. The papers in this volume are organized under the topics Geologic Framework, Resources, and Environment and Climate. This organization is intended to reflect the scope and objectives of current USGS geologic programs in Alaska. In particular, Geologic Framework studies provide background information that is the scientific basis for present and future earth-science investigations.

Alaska↗

USGS2015

Studies by the U.S. Geological Survey in Alaska, Volume 15

Summary Professional Paper 1814— Studies by the U.S. Geological Survey in Alaska, Volume 15 —continues a long-running series of collected volumes of U.S. Geological Survey (USGS) scientific reports on Alaska. This series presents new and sometimes preliminary findings that are of interest to Earth and biological scientists in academia, government, and industry; to land and resource managers; and to the general public. The series covers a broad spectrum of scientific topics, from various parts of Alaska, serving to emphasize the diversity of USGS efforts to meet the Nation’s needs for Earth-science information in the State. The USGS provides reliable scientific information to describe and understand the Earth; minimize loss of life and property from natural disasters; manage water, biological, energy, and mineral resources; and enhance and protect our quality of life.

Professional Paper↗

USGS2026

Forecasting volcanic activity in Germany—A multi-criteria approach

Igneous activity, including shallow intrusions and volcanism, has the potential to disrupt underground critical infrastructure. Notably, future underground infrastructure projects like high-level radioactive waste repositories must be sited in areas of extremely low disruption probability by igneous activity. In Germany, according to the Repository Site Selection Act of 2017 (Standortauswahlgesetz, or StandAG), areas in which Quaternary volcanism is either present or future volcanic activity is expected within the next 1 million years (m.y.) must be excluded from the site selection process. Although the locations of regions with Quaternary volcanism are reasonably well known in Germany, forecasting potential igneous activity at intraplate volcanic fields is challenging, as many processes and their interactions control the spatial distribution of volcanic centers. Here, a semi-quantitative, multi-criteria approach is proposed for a regional evaluation of the relative potential of future igneous activity in Germany. A variety of geoscientific indicators are used, including seismic anomalies in Earth’s mantle, gravity data, tectonic activity, sutures, ground motion, earthquakes, mantle degassing centers, and geochronological data of volcanic rocks. The indicators describe the sequence of processes from potential melt generation in Earth’s mantle, through ascent and accumulation of melt within the lithosphere, to eruption at Earth’s surface. In total, 15 out of 30 proposed geoscientific indicators are selected and quantified using 20 total assigned parameters. Defined threshold values are used to spatially delimit relevant parameter properties to focus on areas with higher potential of future magmatic activity. To consider uncertainties of parameters and their underlying processes, which are usually more spatially extensive below ground, buffer zones are defined in which values of relevance decrease with increasing distance from the initial lateral shape of a parameter. Normalized parameters are combined into an index, whose spatial value distribution is used to differentiate the relative potential of future igneous activity (within the next 1 m.y.). The sensitivity of the results is shown by varying the weighting factors for the relevant parameters in country-wide index maps. Thereby, profiles illustrate the distribution of the resulting index values and respective index fractions of various parameters. Different index maps for the relative potential of future igneous activity are presented and can be used for hazard assessments.

Professional Paper↗