SEARCH · USGS Science

Results for “One Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources

USGS2024

Monitoring marine eruptions

Introduction Submarine volcanoes produce much of the same seismicity and eruptive activity as subaerial volcanoes and can pose hazards to society. Although they can be monitored with similar techniques and methods as described in other chapters of this volume, their submerged location brings unique challenges. This chapter addresses these challenges and provides recommendations for monitoring volcanoes fully or partly in marine environments to meet the capabilities described in other chapters of this volume. The United States and its territories host dozens of submarine volcanoes with most (around 60) in the Commonwealth of the Northern Mariana Islands. Approximately 20 of the Northern Mariana Islands submarine volcanoes are known to be hydrothermally active, and 10 have confirmed eruptions since the 1950s (for example, Baker and others, 2008; Tepp and others, 2019a). Nine of those volcanoes were considered by the National Volcanic Threat Assessment (Ewert and others, 2018) to have a combination of eruptive type and summit depth that poses a higher risk of hazardous eruptions, although only one was listed as a moderate (level 3) threat. Other notable submarine volcanoes of interest to the United States that have historically erupted are Axial Seamount off the Washington State coast, Kamaʻehuakanaloa in Hawaiʻi, and Vailuluʻu seamount in American Samoa. All of these, however, have a low risk of hazards because of their depth (greater than 600 meters below sea level) and eruptive type and so are not included in the National Volcanic Threat Assessment. In addition to submarine volcanoes, the submerged flanks of island volcanoes can also be a source of hazardous submarine eruptions—for example, the 1877 eruption of Mauna Loa, Hawai‘i, in Kealakekua Bay (Wanless and others, 2006). The most notable submarine eruption in recent times was the 2022 eruption of Hunga Tonga–Hunga Haʻapai in Tonga, which was one of the largest eruptions on Earth in the past 100 years. It created a massive volcanic plume, unprecedented shock waves, and far-reaching tsunami (Lynett and others, 2022). Other recent submarine eruptions in the Pacific Ocean Basin have produced subaerial plumes that reached aircraft heights (Carey and others, 2014) and large pumice rafts that can affect marine traffic and harbors (for example, Jutzeler and others, 2014; Kornei, 2019). These examples illustrate the potential hazards of major submarine eruptions. Yet, submarine volcanoes are largely unmonitored, and many eruptions occur that are unnoticed or only identified hours or days afterward. Within U.S. territory, submarine volcanoes in the Northern Mariana Islands have been known to produce eruptive activity that can affect society. Reports from fishermen and other marine vessels in the Northern Mariana Islands have noted underwater explosions, sea-surface discoloration, and bubbling water, all of which are known to be signs of submarine volcanic activity. South Sarigan seamount, located about 160 kilometers (km) north of Saipan, erupted in 2010 from greater than 150 meters below the sea surface, resulting in a gas and ash plume that reached more than 11.9 km into the atmosphere (for example, Searcy, 2013; Embley and others, 2014), high enough to affect international air traffic. Precursory and co-eruptive seismicity was detected on the regional Northern Mariana Islands seismic network (Searcy, 2013) and on global monitoring instruments (Green and others, 2013). Monitoring of submarine volcanoes is best accomplished with marine-based instrumentation, which is also useful for monitoring small island volcanoes that may not have the land area necessary for comprehensive subaerial monitoring. The primary marine-based instrumentation used for submarine volcanoes includes ocean-bottom pressure sensors to assess sea-floor deformation, ocean-bottom seismometers (OBSs) to detect seismicity, and both moored and ocean-bottom hydrophones to detect submarine explosions. Other sensors offer important monitoring data, such as turbidity, temperature, and chemistry of hydrothermal emissions. Marine-based instruments are typically deployed in campaign-style networks with no real-time telemetry owing to cost considerations and technical limitations. However, when necessary, marine instruments can be operated in real time using cables to transmit data to land-based facilities; other technologies for this purpose are in use or in development, such as acoustic transmission from the instrument to a moored buoy (Matsumoto and others, 2016) and a winch-based system with a satellite antenna that is part of the instrument mooring (Matsumoto and others, 2019). Emerging technologies for marine-based monitoring may be considered as part of a future monitoring plan. These technologies include ocean gliders and floats with on-board hydrophones that have been used to record earthquakes and submarine eruptions (for example, Matsumoto and others, 2013; Sukhovich and others, 2015) and fiber-optic cables that have been used as strainmeters to detect earthquakes (for example, Marra and others, 2018; Lindsey and others, 2019). Land-based instruments and satellites can also provide some capability for monitoring submarine volcanoes, but they provide more limited observations than marine-based instrumentation.

Scientific Investigations Report↗

USGS2024

Ranking of 10 global one-arc-second DEMs reveals limitations in terrain morphology representation

At least 10 global digital elevation models (DEMs) at one-arc-second resolution now cover Earth. Comparing derived grids, like slope or curvature, preserves surface spatial relationships, and can be more important than just elevation values. Such comparisons provide more nuanced DEM rankings than just elevation root mean square error (RMSE) for a small number of points. We present three new comparison categories: fraction of unexplained variance (FUV) for grids with continuous floating point values; accuracy metrics for integer code raster classifications; and comparison of stream channel vector networks. We compare six global DEMs that are digital surface models (DSMs), and four edited versions that use machine learning/artificial intelligence techniques to create a bare-earth digital terrain model (DTM) for different elevation ranges: full Earth elevations, under 120 m, under 80 m, and under 10 m. We find edited DTMs improve on elevation values, but because they do not incorporate other metrics in their training they do not improve overall on the source Copernicus DSM. We also rank 17 common geomorphic-derived grids for sensitivity to DEM quality, and document how landscape characteristics, especially slope, affect the results. None of the DEMs perform well in areas with low average slope compared to reference DTMs aggregated from 1 m airborne lidar data. This indicates that accurate work in low-relief areas grappling with global climate change should use airborne lidar or very high resolution image-derived DTMs.

Remote Sensing↗

USGS1986

Volcano monitoring at the U.S. Geological Survey's Hawaiian Volcano Observatory

The island of Hawaii has one of the youngest landscapes on Earth, formed by the frequent addition of new lava to its surface. Because Hawaiian eruptions are generally nonexplosive and easily accessible, the island has long attracted geologists interested in studying the extraordinary power of volcanic eruption. The U.S. Geological Survey's Hawaiian Volcano Observatory (HVO), now nearing its 75th anniversary, has been in the forefront of volcanology since the early 1900s. This issue of <i>Earthquakes and Volcanoes</i> is devoted to the work of the Observatory and its role in studying the most recent eruptions of Hawaii's two currently active volcanoes, Kilauea and Mauna Loa.

Earthquakes & Volcanoes (USGS)↗

USGS1986

Volcano monitoring at the U.S. Geological Survey's Hawaiian Volcano Observatory

The island of Hawaii has one of the youngest landscapes on Earth, formed by frequent addition of new lava to its surface. Because Hawaiian are generally nonexplosive and easily accessible, the island has long attracted geologists interested in studying the extraordinary power of volcanic eruptions. The U.S. Geological Survey's Hawaiian Volcano Observatory (HVO), now nearing its 75th anniversary. has been in the forefront of volcanology since the 1900's. This issue of Earthquakes and volcanoes is devoted to the work of the Observatory and its role in studying the most recent eruptions of Hawaii's two currently active volcanoes, Kilauea and Mauna Loa.

Hawaii↗

USGS2012

One hundred years of volcano monitoring in Hawaii

In 2012 the Hawaiian Volcano Observatory (HVO), the oldest of five volcano observatories in the United States, is commemorating the 100th anniversary of its founding. HVO's location, on the rim of Kilauea volcano (Figure 1)—one of the most active volcanoes on Earth—has provided an unprecedented opportunity over the past century to study processes associated with active volcanism and develop methods for hazards assessment and mitigation. The scientifically and societally important results that have come from 100 years of HVO's existence are the realization of one man's vision of the best way to protect humanity from natural disasters. That vision was a response to an unusually destructive decade that began the twentieth century, a decade that saw almost 200,000 people killed by the effects of earthquakes and volcanic eruptions.

Hawai'i↗

USGS2011

Seismicity of the Earth 1900-2010 Mexico and vicinity

Mexico, located in one of the world's most seismically active regions, lies on three large tectonic plates: the North American plate, Pacific plate, and Cocos plate. The relative motion of these tectonic plates causes frequent earthquakes and active volcanism and mountain building. Mexico's most seismically active region is in southern Mexico where the Cocos plate is subducting northwestward beneath Mexico creating the deep Middle America trench. The Gulf of California, which extends from approximately the northern terminus of the Middle America trench to the U.S.-Mexico border, overlies the plate boundary between the Pacific and North American plates where the Pacific plate is moving northwestward relative to the North American plate. This region of transform faulting is the southern extension of the well-known San Andreas Fault system.

Open-File Report↗

USGS1998

Aeromagnetic evidence for a volcanic caldera(?) complex beneath the divide of the West Antarctic Ice Sheet

A 1995–96 aeromagnetic survey over part of the Sinuous Ridge (SR) beneath the West Antarctic Ice Sheet (WAIS) divide shows a 70-km diameter circular pattern of 400–1200-nT anomalies suggesting one of the largest volcanic caldera(?) complexes on earth. Radar-ice-sounding (RIS) shows the northern part of this pattern overlies the SR, and extends south over the Bentley Subglacial Trench (BST). Modeled sources of all but one the caldera(?) anomalies are at the base of <1–2-km thick ice and their volcanic edifices have been glacially removed. The exception is a 700-m high, 15-km wide "volcano" producing an 800-nT anomaly over the BST. “Intrusion” of this “volcano” beneath 3 km of ice probably resulted in pillow basalt rather than easily removed hyaloclastite erupted beneath thinner ice. The background area (−300 to −500-nT) surrounding the caldera(?) is possibly caused by a shallow Curie isotherm. We suggest uplift of the SR forced the advance of the WAIS.

Geophysical Research Letters↗

USGS2025

The progression of basaltic–rhyolitic melt storage at Yellowstone Caldera

Yellowstone Caldera is one of the largest volcanic systems on Earth, hosting three major caldera-forming eruptions in the past two million years, interspersed with periods of less explosive, smaller-volume eruptions 1 . Caldera-forming eruptions at Yellowstone are sourced by rhyolitic melts stored within the mid- to upper crust. Seismic tomography studies have suggested that a broad region of rhyolitic melt extends beneath Yellowstone Caldera, with an estimated melt volume that is one to four times greater than the eruptive volume of the largest past caldera-forming eruption, and an estimated melt fraction of 6–28 per cent 2 , 3 , 4 , 5 . Seismic velocity is strongly influenced by temperature, pressure and melt; however, magnetotelluric data are primarily sensitive to the presence of melt, making these data ideal for constraining volcanic systems. Here we utilize magnetotelluric data to model the resistivity structure of Yellowstone Caldera’s crustal magma reservoir and constrain the region’s potential for producing major volcanic eruptions. We find that rhyolitic melts are stored in segregated regions beneath the caldera with low melt fractions, indicating that the reservoirs are not eruptible. Typically, these regions have melt volumes equivalent to small-volume post-caldera Yellowstone eruptions. The largest region of rhyolitic melt storage, concentrated beneath northeast Yellowstone Caldera, has a storage volume similar to the eruptive volume of Yellowstone’s smallest caldera-forming eruption. We identify regions of basalt migrating from the lower crust, merging with and supplying heat to the northeast region of rhyolitic melt storage. On the basis of our analysis, we suggest that the locus of future rhyolitic volcanism has shifted to northeast Yellowstone Caldera.

Idaho, Montana, Wyoming↗

USGS2009

Earth system sensitivity inferred from Pliocene modelling and data

Quantifying the equilibrium response of global temperatures to an increase in atmospheric carbon dioxide concentrations is one of the cornerstones of climate research. Components of the Earths climate system that vary over long timescales, such as ice sheets and vegetation, could have an important effect on this temperature sensitivity, but have often been neglected. Here we use a coupled atmosphere-ocean general circulation model to simulate the climate of the mid-Pliocene warm period (about three million years ago), and analyse the forcings and feedbacks that contributed to the relatively warm temperatures. Furthermore, we compare our simulation with proxy records of mid-Pliocene sea surface temperature. Taking these lines of evidence together, we estimate that the response of the Earth system to elevated atmospheric carbon dioxide concentrations is 30-50% greater than the response based on those fast-adjusting components of the climate system that are used traditionally to estimate climate sensitivity. We conclude that targets for the long-term stabilization of atmospheric greenhouse-gas concentrations aimed at preventing a dangerous human interference with the climate system should take into account this higher sensitivity of the Earth system. ?? 2010 Macmillan Publishers Limited. All rights reserved.

Nature Geoscience↗

USGS1983

Geology and description of thorium and rare-earth deposits in the southern Bear Lodge Mountains, northeastern Wyoming

The Bear Lodge Mountains are a small northerly trending range approximately 16 km northwest of the Black Hills in the northeast corner of Wyoming. Thorium and rare-earth deposits occur over an area of 16 km 2 in the southern part of these mountains. These deposits occur in the core of the Bear Lodge dome in a large multiple intrusive body made up principally of trachyte and phonolite. Two types of deposits are recognized: disseminated deposits and veins. The disseminated deposits are made up of altered igneous rocks cut by numerous crisscrossing veinlets. The disseminated deposits contain thorium and rare-earth minerals in a matrix consisting principally of potassium feldspar, quartz, and iron and manganese oxides. Total rare-earth content of these deposits is about 27 times that of the thorium content. The general size and shape of the disseminated deposits were outlined by making a radiometric map using a scintillation counter of the entire Bear Lodge core, an area of approximately 30 km 2 . The most favorable part of this area, which was outlined by the 40 countJs (count-per-second) isograd on the radiometric map, was sampled in detail. A total of 341 samples were taken over an area of 10.6 km 2 and analyzed for as many as 60 elements. Rare earths and thorium are the principal commodities of interest in these deposits. Total rare-earth content of these samples ranged from 47 to 27,145 ppm (parts per million), and the thorium content from 9.3 to 990 ppm. The amount of total rare earths of individual samples shows little correlation with that of thorium. Contour maps were constructed using the analytical data for total rare earths, thorium, uranium, and potassium. The total rare-earth and thorium maps can be used to define the size of the deposits based on what cut-off grade may be needed during mining. The size is large as the 2,000 ppm total rare-earth isograd encloses several areas that total 3.22 km 2 in size, and the 200 ppm thorium isograd encloses several areas that total 1.69 km 2 . These deposits could be mined by open pit. The Bear Lodge disseminated deposits have one of the largest resources of both total rare earths and thorium in the United States, and although the grade of both commodities is lower than some other deposits, their large size and relative cheapness of mining make them an important future resource. Vein deposits in the Bear Lodge Mountains include all tabular bodies at least 5 cm thick. Twenty-six veins were noted in this area. These veins are thin and short; the longest vein was traced for only 137 m. Minerals vary greatly in the amount present. Gangue minerals are commonly potassium feldspar, quartz, or cristobalite intermixed with varying amounts of limonite, hematite, and various manganese oxides. Rare earths and thorium occur in the minerals monazite, brockite, and bastnaesite. Thorium content of 35 samples ranged from 0.01 to 1.2 percent, and the total rare-earth content of 21 samples from 0.23 to 9.8 percent. Indicated reserves were calculated to a depth of one-third the exposed length of the vein. Inferred reserves lie in a block surrounding indicated reserves. Indicated reserves of all veins are only 50 t of Th0 2 and 1,360 t of total rare-earth oxides; inferred reserves are 250 t of Th0 2 and 6,810 t of total rare-earth oxides. The Bear Lodge dome, which underlies the greater part of this area, is formed by multiple intrusive bodies of Tertiary age that dome up the surrounding sedimentary rocks. In the southern part of the core, the younger intrusive bodies surround and partly replace a granite of Precambrian age. This granite is approximately 2.6 b.y. old. The sedimentary rocks around the core are (from oldest to youngest): Deadwood Formation of Late Cambrian and Early Ordovician age, Whitewood Limestone of Late Ordovician age, Pahasapa Limestone of Early Mississippian age, Minnelusa Sandstone of Pennsylvanian and Early Permian age, Opeche Formation of Permian age, Minnek

Professional Paper↗

USGS2017

Field-trip guide to a volcanic transect of the Pacific Northwest

The Pacific Northwest region of the United States provides world-class and historically important examples of a wide variety of volcanic features. This guide is designed to give a broad overview of the region’s diverse volcanism rather than focusing on the results of detailed studies; the reader should consult the reference list for more detailed information on each of the sites, and we have done our best to recognize previous field trip leaders who have written the pioneering guides. This trip derives from one offered as a component of the joint University of Idaho- Washington State University volcanology class taught from 1995 through 2014, and it borrows in theme from the classic field guide of Johnston and Donnelly-Nolan (1981). For readers interested in using this field guide as an educational tool, we have included an appendix with supplemental references to resources that provide useful background information on relevant topics, as well as a few suggestions for field-based exercises that could be useful when bringing students to these locations in the future. The 4-day trip begins with an examination of lava flow structures of the Columbia River Basalt, enormous lava fields that were emplaced during one of the largest eruptive episodes in Earth’s recent history. On the second day, the trip turns to the High Lava Plains, a bimodal volcanic province that transgressed from southeast to northwest from the Miocene through the Holocene, at the northern margin of the Basin and Range Province. This volcanic field provides excellent examples of welded ignimbrite, silicic lavas and domes, monogenetic basaltic lava fields, and hydrovolcanic features. The third day is devoted to a circumnavigation of Crater Lake, the result of one of the world’s best-documented caldera-forming eruptions. The caldera walls also expose the anatomy of Mount Mazama, a stratovolcano of the Cascade Range. The last day is spent at Newberry Volcano, a back-arc shield volcano topped by a caldera. Newberry is compositionally bimodal with an abundance of explosive and effusive deposits, including the youngest rhyolites in the Pacific Northwest.

Oregon↗

USGS2013

Seismicity of the Earth 1900–2010 Himalaya and vicinity

Seismicity in the Himalaya region predominantly results from the collision of the India and Eurasia continental plates, which are converging at a relative rate of 40–50 mm/yr. Northward underthrusting of India beneath Eurasia generates numerous earthquakes and consequently makes this area one of the most seismically hazardous regions on Earth. The surface expression of the plate boundary is marked by the foothills of the north-south trending Sulaiman Range in the west, the Indo-Burmese Arc in the east, and the east-west trending Himalaya Front in the north of India. Along the western margin of the India plate, relative motions between India and Eurasia are accommodated by strike-slip, reverse, and oblique-slip faulting resulting in the complex Sulaiman Range fold and thrust belt, and the major translational Chaman Fault in Afghanistan. Beneath the Pamir‒Hindu Kush Mountains of northern Afghanistan, earthquakes occur to depths as great as 200 km as a result of remnant lithospheric subduction. Further north again, the Tian Shan is a seismically active intra-continental mountain belt defined by a series of east-west trending thrust faults thought to be related to the broad footprint of the India-Eurasia collision. Tectonics in northern India are dominated by motion along the Main Frontal Thrust and associated thrust faults of the India-Eurasia plate boundary, which have resulted in a series of large and devastating earthquakes in (and prior to) the 20th century. The Tibetan Plateau to the north of the main plate boundary is a broad region of uplift associated with the India-Eurasia collision, and is cut by a series of generally east-west trending strike-slip faults. These include the Kunlun, Haiyuan, and the Altyn Tagh faults, all of which are left-lateral structures, and the Kara-Koram right-lateral fault. Throughout the plateau, thrust faults accommodate the north-south compressional component of crustal shortening associated with the ongoing collision of India and Eurasia, while strike-slip and normal faults accommodate east-west extension. To the east, The Longmen Shan thrust belt marks the eastern margin of the Tibetan Plateau separating the complex tectonics of the plateau region from the relatively undeformed Sichuan Basin. Further south, the left-lateral Xiangshuihe-Xiaojiiang, right-lateral Red River and right-lateral Sagaing strike-slip fault systems accommodate deformation along the eastern margin of the India plate. Deep earthquakes have also occurred in the Indo-Burmese Arc region, thought to be an expression of eastward-directed subduction of the India plate, though whether subduction is ongoing is still debated.

Himalaya and vicinity↗

USGS2021

Zircon surface crystallization ages for the extremely reduced magmatic products of the Millennium Eruption, Changbaishan Volcano (China/North Korea)

The Millennium Eruption (ME) of Changbaishan volcano (Baitoushan, Paektu) at 946 CE (Common Era) is one of the largest explosive eruptions on Earth during Holocene times. We date unpolished zircon crystal faces from diverse ME products collected from the southern side of Changbaishan volcano where the ME pumice and welded and non-welded pyroclastic flow deposits (PFD) are better exposed. All zircons from a pumice sample of the southern caldera rim and the youngest (Group 1) zircons from a welded pumiceous PFD sample yield an isochron crystallization age of 0.7 ± 1.8 ka (2σ). Zircons from the welded pumiceous PFD sample yield additional two age groups at ~10 ka and ~ 100 ka. Zircons from a non-welded charcoal-containing PFD have only one age population at 100 ka. Our work shows that different eruption products from ME have different zircon surface age distributions and may tap different levels of a zoned felsic magma chamber. In addition, the results indicate that ion microprobe U-Th dating of zircon crystal surfaces from ME pumices can effectively date the Millennium eruption age. Previously reported zircon U-series ages for Qixangzhan eruption (12.2 ± 1.1 ka, 2σ) and Yuanchi eruption (7.3 ± 1.8 ka, 2σ) at Changbaishan are also likely to date their respective eruption ages. The occurrence of 100 ka zircons in welded and non-welded PFDs reveals an important magmatic event for the Changbaishan volcano. Zircon and Fe-rich clinopyroxene crystallized at similar temperature at 770–750 °C, indicative of early zircon crystallization in peralkaline magmas. Another important result is the extremely low oxygen fugacity (fO 2 = ΔFMQ-2) of the Changbaishan samples. Minerals in ME magmas were crystallized under some of the most reducing magmatic environments on Earth. Highly reducing conditions of magmas from Changbaishan supports a continental rift setting and argues against significant involvements of subduction-related oxidizing fluids during magma genesis.

Changbaishan Volcano↗

USGS2013

Tallgrass prairie restoration: seeding for success

Tallgrass prairie is one of the most imperiled ecosystems on Earth. A 2004 estimate indicated that only 2.4 percent of the original northern tallgrass prairie remained in the United States. If tallgrass prairie and the species dependent on it are to survive, management must include restoration of cropland and degraded prairies, in addition to preservation of the few remaining fragments. Despite the importance of restoration and its long history (the first tallgrass prairie restoration was started in 1935 at Curtis Prairie in Wisconsin), few studies have been undertaken with the goal of refining restoration practice. This fact sheet contains the results of one such study, started in 2005, in which we compared three seeding methods (dormant-season broadcast, growing-season broadcast, and growing-season drill) fully crossed with low (10-), medium (20-), and high (34-species) seed mixes replicated 12 times on each of 9 former agricultural fields in Minnesota and Iowa. Plots were 12.2 x 12.2 meters (m) and occupied about 1.6 hectares (ha) (4 acres) of each field. A “successful” restoration is one in which cover and richness of planted species is maximized and cover of exotic and invasive species, especially the noxious weed Canada thistle (Cirsium arvense), is minimized. Details of the planting methods can be located in Larson and others (2011).

Iowa;Minnesota↗

USGS2001

Standard reference water samples for rare earth element determinations

Standard reference water samples (SRWS) were collected from two mine sites, one near Ophir, CO, USA and the other near Redding, CA, USA. The samples were filtered, preserved, and analyzed for rare earth element (REE) concentrations (La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu) by inductively coupled plasma-mass spectrometry (ICP-MS). These two samples were acid mine waters with elevated concentrations of REEs (0.45–161 μg/l). Seventeen international laboratories participated in a ‘round-robin’ chemical analysis program, which made it possible to evaluate the data by robust statistical procedures that are insensitive to outliers. The resulting most probable values are reported. Ten to 15 of the participants also reported values for Ba, Y, and Sc. Field parameters, major ion, and other trace element concentrations, not subject to statistical evaluation, are provided.

Applied Geochemistry↗

USGS1981

Tonalites in crustal evolution

Tonalites, including trondhjemite as a variety, played three roles through geological time in the generation of Earth’s crust. Before about 2.9 Ga ago they were produced largely by simple partial melting of metabasalt to give the dominant part of Archaean grey gneiss terranes. These terranes are notably bimodal; andesitic rocks are rare. Tonalites played a crucial role in the generation of this protocontinental and oldest crust 3.7- 2.9 Ga ago in that they were the only low-density, high-SiO 2 rocks produced directly from basaltic crust. In the enormous event giving the greenstone-granite terranes, mostly 2.8-2.6 Ga ago, tonalites formed in lesser but still important proportions by partial melting of metabasalt in the lower regions of down-buckled greenstone belts and by remobilization of older grey gneisses. Tectonism in the Archaean (3.9- 2.5 Ga ago) perhaps was controlled by small-cell convection (McKenzie & Weiss 1975). Little or no ophiolite or eclogite formed, and only minor andesite. Plate tectonics of modern type (involving large, rigid plates) commenced in the early Proterozoic. Uniformitarianism thus goes back one-half of the age of the earth. Tonalites compose about 5-10 % of crust generated in Proterozoic and Phanerozoic time at convergent oceanic-continental margins. They occur here as minor to prominent members of the compositionally continuous continental-margin batholiths. A simple model of generation of these batholiths is offered: mantle-derived mafic magma pools in the lower crust above a subduction zone reacts with and incorporates wall-rock components (Bowen 1922), and breaches its roof rocks as an initial diapir. This mantle magma also develops a gradient of partial melting in its wall rocks. This wall-rock melt accretes in the collapsed chamber and moves up the conduit broached by the initial diapir, the higher, less siliceous fractions of melting first, the lower, more siliceous (and further removed) fractions of melting last. The process gives in the optimum case a mafic-to-siliceous sequence of diorite or quartz diorite through tonalite or quartz monzodiorite to granodiorite and granite. The model implies that great masses of cumulate phases and refractory wall rock form the roots of continentalmargin batholiths, and that migmatites overlie that residuum and underlie the batholiths.

Philosophical Transactions of the Royal Society A:↗

USGS2012

Eolian features in the Western Desert of Egypt and some applications to Mars

Relations of landform types to wind regimes, bedrock composition, sediment supply, and topography are shown by field studies and satellite photographs of the Western Desert of Egypt. This desert, which lies at the core of the largest hyperarid region on earth, provides analogs of Martian wind-formed features. These include sand dunes, alternating light and dark streaks, knob ‘shadows,’ and yardangs. Surface particles have been segregated by wind into deposits (dunes, sand sheets, and light streaks) that can be differentiated by their grain size distributions, surface shapes, and colors. Throughgoing sand of mostly fine to medium grain size is migrating southward in longitudinal dune belts and barchan chains whose long axes lie parallel to the prevailing northerly winds, but topographic variations such as scarps and depressions strongly influence the zones of deposition and dune morphology. Sand from the longitudinal dunes on the plains is commonly redistributed into barchans in the depressions. These barchans are generally simple crescents that are morphologically similar to many of the dunes seen on Viking orbiter pictures of the north polar sand sea on mars. Light streaks are depositional features consisting of dune belts and elongate sheets of coarse to medium sand and granules. Intervening dark streaks are erosional features consisting of strips of desert-varnished bedrock and lag gravel surfaces exposed between the sand deposits. The shape of both light and dark streaks is controlled by wind flow around topographic highs. Dark zones (shadows) in the lee of mountains, hills, and knobs are erosional products from the topographic highs; they change shape only in response to movement of the adjacent lighter-colored sand deposits. Streamlined yardangs carved in crystalline limestone constitute one of the largest yardang fields on earth. Yardangs occur also in sandstone of the Nubian Series and in lacustrine sediments. The variables that affect the patterns of wind erosion and deposition in the Western Desert are topographic effects on wind velocities and directions, resistance of the bedrock, sand supply, and climatic change with time; vegetation is essentially absent and is not a controlling factor.

Journal of Geophysical Research Solid Earth↗

USGS2021

Down to Earth with nuclear electromagnetic pulse: Realistic surface impedance aﬀects mapping of the E3 geoelectric hazard

An analysis is made of Earth-surface geoelectric fields and voltages on electricity transmission power-grids induced by a late-phase E3 nuclear electromagnetic pulse (EMP). A hypothetical scenario is considered of an explosion of several hundred kilotons set several hundred kilometers above the eastern-midcontinental United States. Ground-level E3 geoelectric fields are estimated by convolving a standard parameterization of E3 geomagnetic field variation with magnetotelluric Earth-surface impedance tensors derived from wideband measurements acquired across the study region during a recent survey. These impedance tensors are a function of subsurface three-dimensional electrical conductivity structure. Results, presented as a movie-map, demonstrate that localized differences in surface impedance strongly distort the amplitude, polarization, and variational phase of induced E3 geoelectric fields. Locations with a high degree of E3 geoelectric polarization tend to have high geoelectric amplitude. Uniform half-space models and one-dimensional, depth-dependent models of Earth-surface impedance, such as those widely used in government and industry reports informing power-grid vulnerability assessment projects, do not provide accurate estimates of the E3 geoelectric hazard in complex geological settings. In particular, for the Eastern-Midcontinent, half-space models can lead to (order-one) overestimates/underestimates of EMP-induced geovoltages on parts of the power grid by as much as 1,000 volts (a range of 2,000 volts)—comparable to the amplitudes of the geovoltages themselves.

Earth and Space Sciences↗