USGS Science⌕ Search

SEARCH · USGS Science

Results for “Minerals and the Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources
USGS2009

Discovery of jarosite within the Mawrth Vallis region of Mars: Implications for the geologic history of the region

Analysis of visible to near infrared reflectance data from the MRO CRISM hyperspectral imager has revealed the presence of an ovoid-shaped landform, approximately 3 by 5 km in size, within the layered terrains surrounding the Mawrth Vallis outflow channel. This feature has spectral absorption features consistent with the presence of the ferric sulfate mineral jarosite, specifically a K-bearing jarosite (KFe 3 (SO 4 ) 2 (OH) 6 ). Terrestrial jarosite is formed through the oxidation of iron sulfides in acidic environments or from basaltic precursor minerals with the addition of sulfur. Previously identified phyllosilicates in the Mawrth Vallis layered terrains include a basal sequence of layers containing Fe-Mg smectites and an upper set of layers of hydrated silica and aluminous phyllosilicates. In terms of its fine scale morphology revealed by MRO HiRISE imagery, the jarosite-bearing unit has fracture patterns very similar to that observed in Fe-Mg smectite-bearing layers, but unlike that observed in the Al-bearing phyllosilicate unit. The ovoid-shaped landform is situated in an east-west bowl-shaped depression superposed on a north sloping surface. Spectra of the ovoid-shaped jarosite-bearing landform also display an anomalously high 600 nm shoulder, which may be consistent with the presence of goethite and a 1.92 ??m absorption which could indicate the presence of ferrihydrite. Goethite, jarosite, and ferrihydrite can be co-precipitated and/or form through transformation of schwertmannite, both processes generally occurring under low pH conditions (pH 2-4). To date, this location appears to be unique in the Mawrth Vallis region and could represent precipitation of jarosite in acidic, sulfur-rich ponded water during the waning stages of drying. ?? 2009 Elsevier Inc. All rights reserved.

Icarus↗
USGS2020

Sphalerite oxidation in seawater with covellite: Implications for seafloor massive sulfide deposits and mine waste

Metal sulfide minerals exist in several marine environments and are in thermodynamic disequilibrium with oxygenated seawater from the time of their formation. Oxidation is both ubiquitous and heterogeneous, as observational and experimental evidence demonstrates that sulfide minerals may oxidize completely on decadal timescales (hydrothermal plumes) or incompletely in billions of years (mineral deposits); however, the processes, rates, and interactions among minerals as oxidative dissolution occurs are not well understood. Added impetus to understanding these processes exists due to the potential for mining of seafloor massive sulfide deposits and potential environmental impacts of that activity. Here, we present a laboratory-based experimental study on the galvanic oxidation of sphalerite and synthesized zinc sulfide and coupled to covellite. We find that, in contrast to single-mineral reactions, coupled mineral reactions are at least 2 orders of magnitude more rapid, light independent, and have a lower apparent activation energy for oxidation. These results begin to provide insight into observed differences between laboratory and environmentally observed oxidation rates and are a step in the direction of more accurately predicting environmental rates as well as any changes to those rates from anthropogenic disturbances.

ACS Earth and Space Chemistry↗
USGS2014

Biogenic iron mineralization at Iron Mountain, CA with implications for detection with the Mars Curiosity rover

(Introduction) Microbe-mineral interactions and biosignature preservation in oxidized sulfidic ore bodies (gossans) are prime candidates for astrobiological study. Such oxidized iron systems have been proposed as analogs for some Martian environments. Recent studies identified microbial fossils preserved as mineral-coated filaments. This study documents microbially-mediated mineral biosignatures in hydrous ferric oxide (HFO) and ferric oxyhydroxysulfates (FOHS) in three environments at Iron Mountain, CA. We investigated microbial community preservation via HFO and FOHS precipitation and the formation of filamentous mineral biosignatures. These environments included 1) actively precipitating (1000's yrs), naturally weathered HFO from in situ gossan, and 3) remobilized iron deposits, which contained lithified clastics and zones of HFO precipitate. We used published biogenicity criteria as guidelines to characterize the biogenicity of mineral filaments. These criteria included A) an actively precipitating environment where microbes are known to be coated in minerals, B) presence of extant microbial communities with carbon signatures, C) structures observable as a part of the host rock, and D) biological morphology, including cellular lumina, multiple member population, numerous taxa, variable and 3-D preservation, biological size ranges, uniform diameter, and evidence of flexibility. This study explores the relevance and detection of these biosignatures to possible Martian biosignatures. Similar filamentous biosignatures are resolvable by the Mars Hand Lens Imager (MAHLI) onboard the Mars Science Laboratory (MSL) rover, Curiosity, and may be identifiable as biogenic if present on Mars.

California↗
USGS1993

Relations of ammonium minerals at several hydrothermal systems in the western U.S.

Ammonium bound to silicate and sulfate minerals has recently been located at several major hydrothermal systems in the western U.S. utilizing newly-discovered near-infrared spectral properties. Knowledge of the origin and mineralogic relations of ammonium minerals at known hydrothermal systems is critical for the proper interpretation of remote sensing data and for testing of possible links to mineralization. Submicroscopic analysis of ammonium minerals from two mercury- and gold-bearing hot-springs deposits at Ivanhoe, Nevada and McLaughlin, California shows that the ammonium feldspar, buddingtonite, occurs as fine-grained euhedral crystals coating larger sulfide and quartz crystals. Ammonium feldspar seems to precipitate relatively late in the crystallization sequence and shows evidence for replacement of NH4+ by K+ or other monovalent cations. Some buddingtonite is observed in close association with mercury, but not with gold. Ammonioalunite is found in a variety of isolated crystal forms at both deposits. Nitrogen isotopic values for ammonium-bearing minerals show a 14??? range in composition, precluding assignment of a specific provenance to the nitrogen. The correlations of nitrogen isotopic values with depth and ammonium content suggest some loss of nitrogen in the oxidizing supergene environment, possibly as a metastable mineral. The high ammonium content in these hydrothermal systems, the close association to mercury, and the small crystal size of the ammonium-bearing minerals all suggest that ammonium may be transported in a late-stage vapor phase or as an organic volatile. Such a process could lead to the formation of a non-carbonaceous organic aureole above a buried geothermal source. The discovery of a 10-km outcrop of ammonium minerals confirms that significant substitution of ammonium in minerals is possible over an extensive area and that remote sensing is a feasible means to detect such aureoles. ?? 1993.

Journal of Volcanology and Geothermal Research↗
USGS1989

The campi flegrei (Italy) geothermal system: A fluid inclusion study of the mofete and San Vito fields

A fluid inclusion study of core from the Mofete 1, Mofete 2, Mofete 5, San Vito 1, and San Vito 3 geothermal wells (Campi Flegrei, Campania, Italy) indicates that the hydrothermal minerals were precipitated from aqueous fluids (??CO2) that were moderately saline (3-4 wt.% NaCl equiv.) to hypersaline (> 26 wt.% NaCl equiv.) and at least in part, boiling. Three types of primary fluid inclusions were found in authigenic K-feldspar, quartz, calcite, and epidote: (A) two-phase [liquid (L) + vapor (V)], liquid-rich inclusions with a range of salinity; (B) two-phase (L + V), vaporrich inclusions with low salinity; and (C) three-phase [L + V + crystals (NaCL)], liquid-rich inclusions with hypersalinity. Results of microthermometric and crushing studies are reported for twenty drill core samples taken from the lower portions of the five vertical wells. Data presented for selected core samples reveal a general decrease in porosity and increase in bulk density with increasing depth and temperature. Hydrothermal minerals commonly fill fractures and pore-spaces and define a zonation pattern, similar in all five wells studied, in response to increasing depth (pressure) and temperature. A greenschist facies assemblage, defined by albite + actinolite, gives way to an amphibolite facies, defined by plagioclase (andesine) + hornblende, in the San Vito 1 well at about 380??C. The fluid inclusion salinity values mimic the saline and hypersaline fluids found by drilling. Fluid inclusion V/L homogenization temperatures increase with depth and generally correspond to the extrapolated down-hole temperatures. However, fluid inclusion data for Mofete 5 and mineral assemblage data for San Vito 3, indicate fossil, higher-temperature regimes. A limited 87Sr/86Sr study of leachate (carbonate) and the leached cores shows that for most samples (except San Vito 3) the carbonate deposition has been from slightly 87Sr-enriched fluids and that Sr isotopic exchange has been incomplete. However, San Vito 3 cores show an approach to fluid/rock Sr equilibrium with a fluid similar to modern ocean water in 87Sr/86Sr ratio. The Campi Flegrei volcanic system has evolved undersaturated products, mostly trachyte, and defines a large (??? 12 km) caldera. The hydrothermal system developed in this location can be used as an analog for fossil systems in similar trachytic environments. The potential for ore mineralization is expressed by the recognition, from fluid inclusion and drilling data, of ore-forming environments such as boiling and brine stratification. ?? 1989.

Journal of Volcanology and Geothermal Research↗
USGS1979

Geology and porphyry copper-type alteration-mineralization of igneous rocks at the Christmas Mine, Gila County, Arizona

The Christmas copper deposit, located in southern Gila County, Arizona, is part of the major porphyry copper province of southwestern North America. Although Christmas is known for skarn deposits in Paleozoic carbonate rocks, ore-grade porphyry-type copper mineralization also occurs in a composite granodioritic intrusive complex and adjacent mafic volcanic country rocks. This study considers the nature, distribution, and genesis of alteration-mineralization in the igneous rock environment at Christmas. At the southeast end of the Dripping Spring Mountains, the Pennsylvanian Naco Limestone is unconformably overlain by the Cretaceous Williamson Canyon Volcanics, a westward-thinning sequence of basaltic volcanic breccia and lava flows, and subordinate clastic sedimentary rocks. Paleozoic and Mesozoic strata are intruded by Laramide-age dikes, sills, and small stocks of hornblende andesite porphyry and hornblende rhyodacite porphyry, and the mineralized Christmas intrusive complex. Rocks of the elongate Christmas stock, intruded along an east-northeast-trending fracture zone, are grouped into early, veined quartz diorite (Dark Phase), biotite granodiorite porphyry (Light Phase), and granodiorite; and late, unveined dacite porphyry and granodiorite porphyry. Biotite rhyodacite porphyry dikes extending east and west from the vicinity of the stock are probably coeval with biotite granodiorite porphyry. Accumulated normal displacement of approximately 1 km along the northwest-trending Christmas-Joker fault system has juxtaposed contrasting levels (lower, intrusive-carbonate rock environment and upper, intrusive-volcanic rock environment) within the porphyry copper system. K-Ar age determinations and whole-rock chemical analyses of the major intrusive rock types indicate that Laramide calc-alkaline magmatism and ore deposition at Christmas evolved over an extended period from within the Late Cretaceous (~75-80 m.y. ago) to early Paleocene (~63-61 m.y. ago). The sequence of igneous rocks is progressively more alkaline and silicic from basalt to granodiorite. Early (Stage I) chalcopyrite-bornite (-molybdenite) mineralization and genetically related K-silicate alteration are centered on the Christmas stock. K-silicate alteration is manifested by pervasive hornblende-destructive biotitization in the stock, biotitization of basaltic volcanic wall rocks, and a continuous stockwork of K-feldspar veinlets and quartz-K-feldspar veins in the stock and quartz-sulfide veins in volcanic rocks. Younger (Stage II) pyrite-chalcopyrite mineralization and quartz-sericite-chlorite alteration occur in a zone overlapping with but largely peripheral to the zone of Stage I stockwork veins. Within the Christmas intrusive complex, K-silicate-altered rocks in the central stock are flanked east and west by zones of fracture-controlled quartz-sericite alteration and strong pyritization. In volcanic rocks quartz-chlorite-pyrite-chalcopyrite veins are superimposed on earlier biotitization and crosscut Stage I quartz-sulfide veins. Beyond the zones of quartz-sericite alteration, biotite rhyodacite porphyry dikes contain the propylitic alteration assemblage epidote-chlorite-albite-sphene. Chemical analyses indicate the following changes during pervasive alteration of igneous rocks: (1) addition of Si, K, H, S, and Cu, and loss of Fe 3+ and Ca during intense biotitization of basalt; (2) loss of Na and Ca, increase of Fe3+/Fe2+, and strong H-metasomatism during sericitization of quartz diorite; and (3) increase in Ca, Na, and Fe3+/Fe2+, and loss of K during intense propylitization of biotite rhyodacite porphyry dikes. Thorough biotitization of biotite granodiorite porphyry in the Christmas stock was largely an isochemical process. Fluid-inclusion petrography reveals that Stage I veins are characterized by low to moderate populations of moderate-salinity and gas-rich inclusions, and sparse but ubiquitous halite-bearing inclusions. Moderate-salinity an

Open-File Report↗
USGS1982

Clay mineralogy of weathering rinds and possible implications concerning the sources of clay minerals in soils

Weathering rinds on volcanic clasts in Quaternary deposits in the western United States contain only very fine grained and poorly crystalline clay minerals. Rinds were sampled from soils containing well-developed argillic B horizons in deposits about 10 5 yr old or more. The clay-size fraction of the rinds is dominated by allophane and iron hydroxy-oxides, whereas the B horizons contain abundant, well-crystallized clay minerals. The contrast between the clay mineralogy of the weathering rinds, in which weathering is isolated from other soil processes, and that of the associated soil matrices suggests a need to reassess assumptions concerning the rates at which clay minerals form and the sources of clay minerals in argillic B horizons. This study suggests that crystalline clay minerals form more slowly in weathering rinds than is generally assumed for soil environments and that the weathering of primary minerals may not be the dominant source of crystalline clay minerals in middle to late Pleistocene soils.

Geology↗
USGS1973

Ultrafiltration by a compacted clay membrane-II. Sodium ion exclusion at various ionic strengths

Several recent laboratory studies and field investigations have indicated that shales and compacted clay minerals behave as semipermeable membranes. One of the properties of semipermeable membranes is to retard or prevent the passage of charged ionic species through the membrane pores while allowing relatively free movement of uncharged species. This phenomenon is termed salt filtering, reverse osmosis, or ultrafiltration. This paper shows how one can proceed from the ion exchange capacity of clay minerals and, by means of Donnan membrane equilibrium concept and the Teorell-Meyer-Siever theory, develop a theory to explain why and to what extent ultrafiltration occurs when solutions of known concentration are forced to flow through a clay membrane. Reasonable agreement between theory and laboratory results were found. The concentration of the ultrafiltrate was always greater than predicted because of uncertainty in values of some parameters in the equations. Ultrafiltration phenomena may be responsible for the formation of some subsurface brines and mineral deposits. The effect should also be taken into consideration in any proposal for subsurface waste emplacement in an environment containing large quantities of clay minerals.

Geochimica et Cosmochimica Acta↗
USGS2011

Microbial reduction of structural iron in interstratified illite-smectite minerals by a sulfate-reducing bacterium

Clay minerals are ubiquitous in soils, sediments, and sedimentary rocks and could coexist with sulfate‐reducing bacteria (SRB) in anoxic environments, however, the interactions of clay minerals and SRB are not well understood. The objective of this study was to understand the reduction rate and capacity of structural Fe(III) in dioctahedral clay minerals by a mesophilic SRB, Desulfovibrio vulgaris and the potential role in catalyzing smectite illitization. Bioreduction experiments were performed in batch systems, where four different clay minerals (nontronite NAu‐2, mixed‐layer illite‐smectite RAr‐1 and ISCz‐1, and illite IMt‐1) were exposed to D. vulgaris in a non‐growth medium with and without anthraquinone‐2,6‐disulfonate (AQDS) and sulfate. Our results demonstrated that D. vulgaris was able to reduce structural Fe(III) in these clay minerals, and AQDS enhanced the reduction rate and extent. In the presence of AQDS, sulfate had little effect on Fe(III) bioreduction. In the absence of AQDS, sulfate increased the reduction rate and capacity, suggesting that sulfide produced during sulfate reduction reacted with the phyllosilicate Fe(III). The extent of bioreduction of structural Fe(III) in the clay minerals was positively correlated with the percentage of smectite and mineral surface area of these minerals. X‐ray diffraction, and scanning and transmission electron microscopy results confirmed formation of illite after bioreduction. These data collectively showed that D. vulgaris could promote smectite illitization through reduction of structural Fe(III) in clay minerals.

Geobiology↗
USGS2009

Volcanogenic Massive Sulfide Deposits of the World - Database and Grade and Tonnage Models

Grade and tonnage models are useful in quantitative mineral-resource assessments. The models and database presented in this report are an update of earlier publications about volcanogenic massive sulfide (VMS) deposits. These VMS deposits include what were formerly classified as kuroko, Cyprus, and Besshi deposits. The update was necessary because of new information about some deposits, changes in information in some deposits, such as grades, tonnages, or ages, revised locations of some deposits, and reclassification of subtypes. In this report we have added new VMS deposits and removed a few incorrectly classified deposits. This global compilation of VMS deposits contains 1,090 deposits; however, it was not our intent to include every known deposit in the world. The data was recently used for mineral-deposit density models (Mosier and others, 2007; Singer, 2008). In this paper, 867 deposits were used to construct revised grade and tonnage models. Our new models are based on a reclassification of deposits based on host lithologies: Felsic, Bimodal-Mafic, and Mafic volcanogenic massive sulfide deposits. Mineral-deposit models are important in exploration planning and quantitative resource assessments for two reasons: (1) grades and tonnages among deposit types vary significantly, and (2) deposits of different types occur in distinct geologic settings that can be identified from geologic maps. Mineral-deposit models combine the diverse geoscience information on geology, mineral occurrences, geophysics, and geochemistry used in resource assessments and mineral exploration. Globally based deposit models allow recognition of important features and demonstrate how common different features are. Well-designed deposit models allow geologists to deduce possible mineral-deposit types in a given geologic environment and economists to determine the possible economic viability of these resources. Thus, mineral-deposit models play a central role in presenting geoscience information in a useful form to policy makers. The foundation of mineral-deposit models is information about known deposits. The purpose of this publication is to present the latest geologic information and newly developed grade and tonnage models for VMS deposits in digital form. This publication contains computer files with information on VMS deposits from around the world. It also presents new grade and tonnage models for three subtypes of VMS deposits and a text file allowing locations of all deposits to be plotted in geographic information system (GIS) programs. The data are presented in FileMaker Pro and text files to make the information available to a wider audience. The value of this information and any derived analyses depends critically on the consistent manner of data gathering. For this reason, we first discuss the rules used in this compilation. Next, we provide new grade and tonnage models and analysis of the information in the file. Finally, the fields of the data file are explained. Appendix A gives the summary statistics for the new grade-tonnage models and Appendix B displays the country codes used in the database.

Open-File Report↗
USGS1999

Stable isotopes and mineral resource investigations in the United States

The elements oxygen, hydrogen, sulfur, and carbon are important constituents of hydrothermal ore-forming systems and the weathering processes of mineral deposits in the surficial environment. They also play key roles in volcanic activity, ecosystem dynamics, climate change, and hydrologic and atmospheric processes. Therefore, study of the stable isotopes of these elements can provide powerful insights into these processes. This is especially true for ongoing U.S. Geological Survey (USGS) projects in the Eastern United States that are concerned with the origins of base (copper, lead, and zinc) and precious (gold and silver) metal deposits in the Carolina slate belt and northern Maine and with the environmental effects of weathering of mineral deposits (fig. 1).

Information Handout↗
USGS2007

Landscape geochemistry near mineralized areas of eastern Alaska

The Pogo lode gold deposit was discovered in eastern Alaska in the early 1990s and provided the opportunity to study elemental distribution and mobility in the natural environment prior to mine development. Studying mineralized systems prior to mining allows us to compare the natural biogeochemical signature in mineralized versus nonmineralized areas. The resultant data and interpretation also provide a baseline for evaluating what, if any, changes in elemental distribution result from development. This report investigates the chemistry of stream water, streambed sediment, and soil in the context of regional bedrock geology. The major-ion chemistry of the waters reflects a rock-dominated aqueous system, and the waters are classified as Ca 2+ and Mg 2+ - HCO 3 - to Ca 2+ and Mg 2+ - SO 4 -2 waters. Creeks draining the gneissic lithologies tend to be more sulfate dominated than those draining the intrusive units. Sulfate also dominated creeks draining mineralized areas; however, the underlying paragneiss unit could be contributing substantially to the sulfate concentration, and the sulfate concentration in these creeks may reflect a complex baltholith-paragneiss boundary rather than mineralization. Arsenic concentrations in bed sediments were elevated in mineralized areas relative to nonmineralized areas. Elevated concentrations of nickel, chromium, iron, manganese, and cobalt appear to reflect the presence of ultramafic rocks in the drainage. In general, aqueous metal concentrations were below the State of Alaska’s Aquatic Life Criteria and Drinking Water Standards, with the exception of arsenic in stream water, which ranged in concentration from less than 1 to 14 micrograms per liter (μg/L) and exceeded the drinking water standard at one site. The arsenic and antimony concentration in the A, B, and C soil horizons ranged from 3 to 410 milligrams per kilogram (mg/kg), 6.1 to 440 mg/kg, and 2 to 300 mg/kg, respectively, for arsenic and 0.4 to 24 mg/kg, 0.6 to 25 mg/kg, and 0.2 to 16 mg/kg, respectively, for antimony. The arsenic and antimony concentrations in stream waters correlate well with the concentrations in soils. However, significantly less arsenic and antimony was extracted from C horizon soils in water leaching experiments, indicating that the arsenic and antimony in the C horizon is present in a less available form than in the A or B horizons. Arsenic and antimony uptake by grayleaf willow (Salix glauca L.) appears minimal, with arsenic concentrations ranging from less than 0.01 to 0.14 mg/kg and antimony concentrations ranging from less than 0.003 to 0.23 mg/kg in willow leaves. In general, the highest concentrations of both arsenic and antimony in water and soils were found near mineralized areas. Elevated arsenic concentrations were also found in bed sediments from mineralized areas. In these sample matrices, the presence of arsenic and (or) antimony was a good indicator of contact with mineralized rock units.

Alaska, Yukon↗
USGS2008

Rock magnetic characterization of faulted sediments with associated magnetic anomalies in the Albuquerque Basin, Rio Grande rift, New Mexico

Variations in rock magnetic properties are responsible for the many linear, short-wavelength, low-amplitude magnetic anomalies that are spatially associated with faults that cut Neogene basin sediments in the Rio Grande rift, including the San Ysidro normal fault, which is well exposed in the northern part of the Albuquerque Basin. Magnetic-susceptibility measurements from 310 sites distributed through a 1200-m-thick composite section of rift-filling sediments of the Santa Fe Group and prerift Eocene and Cretaceous sedimentary rocks document large variations of magnetic properties juxtaposed by the San Ysidro fault. Mean volume magnetic susceptibilities generally increase upsection through eight map units: from 1.7 to 2.2E-4 in the prerift Eocene and Cretaceous rocks to 9.9E-4-1.2E-3 in three members of the Miocene Zia Formation of the Santa Fe Group to 1.5E-3-3.5E-3 in three members of the Miocene-Pleistocene Arroyo Ojito Formation of the Santa Fe Group. Rock magnetic measurements and petrography indicate that the amount of detrital magnetite and its variable oxidation to maghemite and hematite within the Santa Fe Group sediments are the predominant controls of their magnetic property variations. Magnetic susceptibility increases progressively with sediment grain size within the members of the Arroyo Ojito Formation (deposited in fluvial environments) but within members of the Zia Formation (deposited in mostly eolian environments) reaches highest values in fine to medium sands. Partial oxidation of detrital magnetite is spatially associated with calcite cementation in the Santa Fe Group. Both oxidation and cementation probably reflect past flow of groundwater through permeable zones. Magnetic models for geologic cross sections that incorporate mean magnetic susceptibilities for the different stratigraphic units mimic the aeromagnetic profiles across the San Ysidro fault and demonstrate that the stratigraphic level of dominant magnetic contrast changes with different exposure levels into the fault. These data indicate that tectonic juxtaposition of primary variations of magnetic properties of strata across the fault is the source of the associated magnetic anomaly. This study indicates that magnetic anomalies over faults and folds can be generated by sediments (1) deposited within tectonic basins having volcanic or basement source areas rich in magnetite, (2) having depositional environments with sufficient but varying energy to transport dense magnetic minerals and cause stratigraphic changes of magnetic properties, and (3) having magnetic minerals preserved owing to their youth or nonreactive geochemical environments. ?? 2007 Geological Society of America.

Geological Society of America Bulletin↗
USGS2021

Improved Automated Identification and Mapping of Iron Sulfate Minerals, Other Mineral Groups, and Vegetation using Landsat 8 Operational Land Imager Data, San Juan Mountains, Colorado, and Four Corners Region

Multispectral remote sensing data acquired by the Landsat 8 Operational Land Imager (OLI) sensor were analyzed using a new, automated technique to generate a map of exposed mineral and vegetation groups in the western San Juan Mountains, Colo., and the Four Corners Region of the United States. Band ratio results were combined into displayed mineral and vegetation groups using Boolean algebra. New analysis logic has been implemented to exploit the coastal aerosol band in Landsat 8 OLI data and identify concentrations of iron sulfate minerals. These may indicate the presence of near-surface pyrite, which can be a potential nonpoint source of acid rock drainage. Zoned occurrences of iron sulfate minerals in areas surrounding and down gradient of known sources of pyrite have been mapped using this technique. They show high correlation with occurrences of jarosite-bearing mineral assemblages, as mapped using airborne imaging spectrometer data and supporting field verification surveys. Mapping the occurrence of iron sulfate minerals produced by the weathering and oxidation of pyrite in exposed hydrothermally altered rocks can also provide an important indicator of the genetic environment of alteration and the associated mineral deposit type. The automated analysis methodology is being employed to rapidly and cost-effectively generate maps of large regions of the United States in support of U.S. Geological Survey mineral resource and mineral-environmental assessments. This map, which includes the ERDAS IMAGINE thematic raster format in the data release, has been attributed by pixel value with mineral and vegetation group classification data, which can be queried in most image processing and GIS software packages.

Colorado, Utah↗
USGS1951

Uranium in the Copper King Mine, Black Hawk No. 1 Claim, Larimer County, Colorado

Radioactive rock was discovered on the dump of the Copper King mine, sec. 8, T. 10 N., R. 72 W., Larirrier County, Colo., in the summer of 1949. The mine had been prospected intermittently for copper and zinc since 1,916, but there is no record that ore was produced. The country rock is pre-Cambrian granite containing many schist inclusions and narrow pegmatite dikes. Pitchblende disseminated in chlorite and sulfides was deposited in an obscure vein system during an intermediate stage of mineralization. This stage was preceded by biotitic alteration of amphiboles and sulfide deposition. The latest stage of mineralization is represented-by the limonitic dense quartz vein followed during mining. The uranium-bearing vein is about 2-3 feet wide and the dense quartz vein is less than 6 inches wide. Both veins are bordered by 1-3 feet of biotite- and sulfide-bearing granite and arriphibole schist. The uranium content of 26 samples taken in the mine and on the dump ranges from 0.002 to 1.40 percent. These samples contained as much as 2.97 percent copper and 5.96 percent zinc. The general outlook for further prospecting near the Copper King shaft is not favorable, because much of the 'immediately surrounding area has been thoroughly investigated without finding abnormal radioactivity. The most favorable environment for concentration of uranium minerals appears to have been in or near schist inclusions in granite, and further exploration in nearby prospects may result in the discovery of other uranium-bearing deposits. In the Copper King mine, additional exploration would aid in determining the extent of the uranium-bearing material.

Colorado↗
USGS1963

Studies of fluid inclusions; [Part] 2, Freezing data and their interpretation

Aqueous and non-aqueous inclusions in 84 samples of various minerals from a wide range of geologic environments were studied with the freezing stage in order to gain an insight into the range of concentrations and compositions of fluid inclusions . Inclusions in most Mississippi Valley-type ore minerals contain highly concentrated saline solutions, showing freezing temperatures between -23.4° and -10.5° C; minerals from ore deposits of more typically hydrothermal affiliations mainly show temperatures of -9.4° to nearly 0° C; and inclusions in quartz crystals from sedimentary, metamorphic, and igneous rock environments show a wide range of freezing temperatures. Inclusions in pegmatite minerals in particular vary over a wide range, from the most concentrated solutions found in any inclusion (> 40% salts) to fairly dilute solutions (< 5% salts). Most inclusions in quartz from Swiss Alpine-type veins, and from Brazilian quartz veins and pegmatites, show freezing temperatures in the range -8.5° to - 2 .5°, and considerable free C02. Other geologic environments sampled include Colombian emerald, pegmatitic topaz and fluorite, the Triassic traprock zeolite assemblage, and sedimentary halite beds. Not all the phenomena exhibited by inclusions at low temperature are completely understood at present but several crystalline hydrate phases, such as NaCl-2H,0 and CO,-5%H,0 (structural formula 8C02-46H20), are shown to be stable in inclusions of appropriate composition even at temperatures above 0° C, and probably exist in the inclusions in natural rocks in polar regions. More significantly, the formation and recognition of such phases aid in establishing the gross composition of individual inclusions far too small for chemical analysis. The data obtained are useful in a variety of ways, such as: discriminating among gas, liquid, and supercritical fluid , and among liquid water, liquid oil, and liquid C02 in inclusions ; improving precision of the pressure corrections applied to inclusion filling temperature determinations; proving the general lack of leakage into or out of inclusions ; estimating the minimum pressure at the time of deposition of certain samples; verifying the lack of extraneous solid crystallization nuclei in the inclusions and hence their formation from exceedingly quiet, clean solutions; determining the total equivalent NaCl concentrations and some information concerning the composition of the fluids from which ores have formed; and determining changes in the composition of the fluids bathing a single crystal during its growth, and at certain times throughout its history.

Economic Geology↗
USGS1983

Time-domain electromagnetic tests in the Wadi Bidah District, Kingdom of Saudi Arabia

A time-domain electromagnetic (TDEM) method was tested in two areas of mineralization in Precambrian rocks in the Wadi Bidah district, Kingdom of Saudi Arabia. Transient-decay voltages in profile mode were measured across the Sha'ab at Tare and Rabathan prospects by use of three transmitterreceiver loop configurations. At the Sha'ab at Tare prospect all of the loop configurations indicated the mineralized zone. Analysis of the coincident loop data at Sha'ab at Tare reveals that gossanous and altered rock of i0 ohm-m resistivity extends to a depth of 35 m, where there is an unweathered, dry mineralized zone of about 1 ohm-m resistivity. The model further suggests that the rocks at a depth of 55 m and below the water table are even less resistive (0. 1 ohm-m). The TDEM method successfully discriminated conductors within from those below the weathered zone at the Rabathan prospect. Conductors below the weathered zone are identified by a lack of transient response in the early part of the transient decay curve, followed by an increasing response in the middle to late parts of the transient decay curve. Results of these limited tests suggest the potential value of integrating TDEM with other geophysical tools in the Kingdom. Recommendations are made to expand these tests into a more comprehensive program that will evaluate the TDEM potential in various geologic environments that are host to mineral deposits of diverse origin.

Open-File Report↗
USGS1958

Role of clay minerals in the transportation of iron

The clay minerals have iron associated with them in several ways: 1. (1) as an essential constituent 2. (2) as a minor constituent within the crystal lattice where it is in isomorphous substitution and 3. (3) as iron oxide on the surface of the mineral platelets. Nontronite, “hydromica,” some chlorites, vermiculite, glauconite and chamosite contain iron as an essential constituent. Kaolinite and halloysite have no site within the lattice for iron, but in certain environments iron oxide (goethite or hematite) is intimately associated as a coating on the micelles. Analyses of clay minerals show that the content of Fe 2 O 3 varies: 29 per cent (nontronite), 7·3 per cent (griffithite), 4.5 per cent (“hydromica”), 5.5 per cent (chlorite), 4 per cent (vermiculite) and 18 per cent (glauconite). The FeO content is: 40 per cent (chamosite), 7.8 per cent (griffithite), 1–2 per cent (“hydromica”), 3 per cent (glauconite) and 2 per cent (chlorite). The iron associated with the clay minerals remains stable in the environment in which the minerals occur, but if either pH or Eh or both are changed the iron may be affected. Change of environment will cause: 1. (1) removal of iron by reduction of Fe 3+ to Fe 2+ ; 2. (2) ion-exchange reactions; 3. (3) instability of the crystal lattice. Experiments using bacterial activity to produce reducing conditions with kaolinite and halloysite coated with iron oxides and with nontronite in which ferric iron is in the octahedral position within the lattice showed that ferric oxide is removed at Eh +0·215 in fresh water and at Eh +0.098 in sea water. Hematite, goethite, and indefinite iron oxides were removed at different rates. Red ferric oxides were changed to black indefinite noncrystalline ferrous sulphide at Eh −0.020 but reverted to ferric oxide under oxidizing conditions. Nontronite turned bright green under reducing conditions and some of the ferrous iron remained within the lattice on a return to oxidizing conditions. Bacterial activity seems to be necessary for maintaining reducing conditions in the environments studied.

Geochimica et Cosmochimica Acta↗