USGS ScienceSearch

SEARCH · USGS Science

Results for “Mineralogical Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources

Stratigraphy, correlation, depositional setting, and geophysical characteristics of the Oligocene Snowshoe Mountain Tuff and Creede Formation in two cored boreholes

Core descriptions and geophysical logs from two boreholes (CCM-1 and CCM-2) in the Oligocene Snowshoe Mountain Tuff and Creede Formation, south-central Colorado, are used to interpret sedimentary and volcanic facies associations and their physical properties. The seven facies association include a mixed sequence of intracaldera ash-flow tuffs and breccias, alluvial and lake margin deposits, and tuffaceous lake beds. These deposits represent volcanic units related to caldera collapse and emplacement of the Snowshoe Mountain Tuff, and sediments and pyroclastic material deposited in the newly formed caldera basin, Early sedimentation is interpreted to have been rapid, and to have occurred in volcaniclastic fan environments at CCM-1 and in a variery of volcaniclastic fan, braided stream shallow lacustrine, and mudflat environments at CCM-2. After an initial period of lake-level rise, suspension settling, turbidite, and debris-flow sedimentation occurred in lacustrine slope and basin environments below wave base. Carbonate sedimentation was initially sporadic, but more continuous in the latter part of the recorded lake history (after the H fallout tuff). Sublacustrine-fan deposition occurred at CCM-1 after a pronounced lake-level fall and subsequent rise that preceded the H tuff. Variations in density, neutron, gamma-ray, sonic, and electrical properties of deposits penetrated oin the two holes reflect variations in lithology, porosity, and alteration. Trends in the geophysical properties of the lacustrine strata are linked to downhole changes in authigenic mineralology and a decrease in porosity interpreted to have resulted primarily from diagenesis. Lithological and geophysical characteristics provide a basis for correlation of the cores; however, mineralogical methods of correlation are hampered by the degree of diagenesis and alteration.

Colorado

Zircon-scale insights into the history of a Supervolcano, Bishop Tuff, Long Valley, California, with implications for the Ti-in-zircon geothermometer

Zircon has the outstanding capacity to record chronological, thermal, and chemical information, including the storage history of zoned silicic magma reservoirs like the one responsible for the Bishop Tuff of eastern California, USA. Our novel ion microprobe approach reveals that Bishop zircon rims with diverse chemical characteristics surround intermediate domains with broadly similar compositions. The highest Y, REE, U, and Th concentrations tend to accompany the largest excesses in Y + REE3+:P beyond what can be explained by xenotime substitution in zircon. Apparent Ti-in-zircon temperatures of <720??C for zircon rims are distinctly lower than most of the range in eruption temperatures, as estimated from FeTi-oxide equilibria and zircon solubility at quench. While permissive of crystallization of zircon at near-solidus conditions, the low Ti-in-zircon temperatures are probably better explained by sources of inaccuracy in the temperature estimates. After apparently nucleating from different melts, zircons from across the Bishop Tuff compositional spectrum may have evolved to broadly similar chemical and thermal conditions and therefore it is possible that there was no significant thermal gradient in the magma reservoir at some stage in its evolution. There is also no compelling evidence for punctuated heat ?? chemical influxes during the intermediate stages of zircon growth. Judging by the zircon record, the main volume of the erupted magma evolved normally by secular cooling but the latest erupted portion is characterized by a reversal in chemistry that appears to indicate perfusion of the magma reservoir by-or zircon entrainment in-a less evolved melt from the one in which the zircons had previously resided. ?? 2010 Springer-Verlag.

Contributions to Mineralogy and Petrology

Probing the volcanic-plutonic connection and the genesis of crystal-rich rhyolite in a deeply dissected supervolcano in the Nevada Great Basin: Source of the late Eocene Caetano Tuff

Late Cenozoic faulting and large-magnitude extension in the Great Basin of the western USA has created locally deep windows into the upper crust, permitting direct study of volcanic and plutonic rocks within individual calderas. The Caetano caldera in north–central Nevada, formed during the mid-Tertiary ignimbrite flare-up, offers one of the best exposed and most complete records of caldera magmatism. Integrating whole-rock geochemistry, mineral chemistry, isotope geochemistry and geochronology with field studies and geologic mapping, we define the petrologic evolution of the magmatic system that sourced the >1100 km 3 Caetano Tuff. The intra-caldera Caetano Tuff is up to ∼5 km thick, composed of crystal-rich (30–45 vol. %), high-silica rhyolite, overlain by a smaller volume of comparably crystal-rich, low-silica rhyolite. It defies classification as either a monotonous intermediate or crystal-poor zoned rhyolite, as commonly ascribed to ignimbrite eruptions. Crystallization modeling based on the observed mineralogy and major and trace element geochemistry demonstrates that the compositional zonation can be explained by liquid–cumulate evolution in the Caetano Tuff magma chamber, with the more evolved lower Caetano Tuff consisting of extracted liquids that continued to crystallize and mix in the upper part of the chamber following segregation from a cumulate-rich, and more heterogeneous, source mush. The latter is represented in the caldera stratigraphy by the less evolved upper Caetano Tuff. Whole-rock major, trace and rare earth element geochemistry, modal mineralogy and mineral chemistry, O, Sr, Nd and Pb isotope geochemistry, sanidine Ar–Ar geochronology, and zircon U–Pb geochronology and trace element geochemistry provide robust evidence that the voluminous caldera intrusions (Carico Lake pluton and Redrock Canyon porphyry) are genetically equivalent to the least evolved Caetano Tuff and formed from magma that remained in the lower chamber after ignimbrite eruption and caldera collapse. Thus, the Caetano Tuff contradicts models for the mutually exclusive origins of voluminous volcanic and plutonic magmas in the upper crust. Crystal-scale O isotope data indicate that the Caetano Tuff is one of the most 18 O-enriched rhyolites in the Great Basin (δ 18 O magma = 10·2 ± 0·2‰), supporting anatexis of local metasedimentary basement crust. Metapelite xenoliths in the Carico Lake pluton and ubiquitous xenocrystic zircons in the Caetano Tuff provide constraints for the anatexis process; these data point to shallow (<15 km) dehydration melting of a protolith similar to the Proterozoic McCoy Creek Group siliciclastic sediments in eastern Nevada, projected beneath Caetano in fault-stacked shelf sediments that were thickened during Mesozoic crustal shortening. Mean zircon U–Pb ages for different stratigraphic levels of the intra-caldera Caetano Tuff are 34·2–34·5 Ma, 0·2–0·5 Myr older than the caldera sanidine 40 Ar/ 39 Ar age of 34·00 ± 0·03 Ma, documenting protracted duration of assembly and homogenization of isotopically diverse upper crustal melts, followed by crystallization and zonation to generate the Caetano Tuff magma chamber. Sanidine rims in the least evolved Caetano Tuff and in the Carico Lake pluton and Redrock Canyon porphyry have sharply zoned Ba domains that point to crystal growth during magmatic recharge events. The recharge magma is inferred to have been compositionally similar to the Caetano Tuff magma, with increased Ba resulting from remelting of Ba-rich sanidine cumulates. Mush reactivation to generate the Caetano Tuff eruption was sufficiently rapid to preserve compositional gradients in the intracaldera ignimbrite, calling into question models that predict homogeneity as a prerequisite for remobilizing crystal-rich ignimbrite magmas.

Journal of Petrology

Fe-Ca-phosphate, Fe-silicate, and Mn-oxide minerals in concretions from the Monterey Formation

Concentrically zoned phosphatic-enriched concretions were collected at three sites from the Monterey Formation. The following minerals were identified: vivianite, lipscombite, rockbridgeite, leucophosphite, mitridatite, carbonate fluorapatite, nontronite, todorokite, and barite. The mineralogy of the concretions was slightly different at each of the three collection sites. None of the concretions contains all of the minerals, but the spatial distribution of minerals in individual concretions, overlapping mineralogies between different concretions, and the geochemical properties of the separate minerals suggest a paragenesis represented by the above order. Eh increased from the precipitation of vivianite to that of rockbridgeite/lipscombite. The precipitation of leucophosphite, then mitridatite, carbonate fluorapatite and todorokite/Fe-oxide indicates increasing pH. Concretion growth culminated with the precipitation of todorokite, a Mn oxide, and minor amounts of barite along microfractures. Conspicuously absent are Fe-sulfide and Mn-phosphate minerals. The concretions are hosted by finely laminated diatomite. The laminations exhibit little to no deformation around the concretions, requiring that the concretions formed after compaction. We interpret this sediment feature and the paragenesis as recording the evolving pore-water chemistry as the formation was uplifted into the fresh-ground-water zone.

Chemical Geology

Chesapeake Bay impact structure—Development of "brim" sedimentation in a multilayered marine target

The late Eocene Chesapeake Bay impact structure was formed in a multilayered target of seawater underlain sequentially by a sediment layer and a rock layer in a continental-shelf environment. Impact effects in the “brim” (annular trough) surrounding and adjacent to the transient crater, between the transient crater rim and the outer margin, primarily were limited to the target-sediment layer. Analysis of published and new lithostratigraphic, biostratigraphic, sedimentologic, petrologic, and mineralogic studies of three core holes, and published studies of a fourth core hole, provided information for the interpretation of the impact processes, their interactions and relative timing, their resulting products, and sedimentation in the brim. Most studies of marine impact-crater materials have focused on those found in the central crater. There are relatively few large, complex marine craters, of which most display a wide brim around the central crater. However, most have been studied using minimal data sets. The large number of core holes and seismic profiles available for study of the Chesapeake Bay impact structure presents a special opportunity for research. The physical and chronologic records supplied by study of the sediment and rock cores of the Chesapeake Bay impact indicate that the effects of the initial, short-lived contact and compression and excavation stages of the impact event primarily were limited to the transient crater. Only secondary effects of these processes are evident in the brim. The preserved record of the brim was created primarily in the subsequent modification stage. In the brim, the records of early impact processes (e.g., outgoing tsunamis, overturned flap collapse) were modified or removed by later processes. Transported and rotated, large and small clasts of target sediments, and intervals of fluidized sands indicate that seismic shaking fractured and partially fluidized the Cretaceous and Paleogene target sediments, which led to their inward transport by collapse and lateral spreading toward the transient crater. The succeeding inward seawater-resurge flow quickly overtook and interacted with the lateral spreading, further facilitating sediment transport across the brim and into the transient crater. Variations in the cohesion and relative depth of the target sediments controlled their degree of disaggregation and redistribution during these events. Melt clasts and shocked and unshocked rock clasts in the resurge sediments indicate fallout from the ejecta curtain and plume. Basal parautochthonous remnant sections of target Cretaceous sediments in the brim thin toward the collapsed transient crater. Overlying seawater-resurge deposits consist primarily of diamictons that vary laterally in thickness, and vertically and laterally in maximum grain size. After cessation of resurge flow and re-establishment of pre-impact sea level, sandy sediment gravity flows moved from the margin to the center of the partially filled impact structure (shelf basin). The uppermost unit consists of stratified sediments deposited from suspension. Postimpact clayey silts cap the crater fill and record the return to shelf sedimentation at atypically large paleodepths within the shelf basin. An unresolved question involves a section of gravel and sand that overlies Neoproterozoic granite in the inner part of the brim in one core hole. This section may represent previously unrecognized, now parautochthonous Cretaceous sediments lying nonconformably above basement granite, or it may represent target sediments that were moved significant distances by lateral spreading above basement rocks or above a granite megaclast from the overturned flap. The Chesapeake Bay impact structure is perhaps the best documented example of the small group of multilayer, marine-target impacts formed in continental shelves or beneath epeiric seas.

Chesapeake Bay

The antiquity of the Sahara Desert: New evidence from the mineralogy and geochemistry of Pliocene paleosols on the Canary Islands, Spain

The Sahara is the largest warm desert in the world, but its age has been controversial, with estimates ranging from Miocene to Holocene. Mineralogical and geochemical data show that paleosols of Pliocene to mid-Pleistocene age on Fuerteventura and Gran Canaria in the Canary Islands have developed in part from inputs of dust from Africa. These paleosols contain quartz and mica, minerals that are abundant in African dust but are rare in the basaltic rocks that dominate the Canary Islands. Trace elements with minimal mobility, Sc, Cr, Hf, Th, and Ta as well as the rare earth elements, show that paleosols have compositions that are intermediate between those of local rocks and African-derived dust. Thus, results reported here and in a recently published study by others indicate that 9 paleosols record delivery of African dust to the Canary Islands between ~4.8–2.8 Ma, ~3.0–2.9 Ma, ~2.3–1.46 Ma, and ~0.4 Ma. A long-term paleosol record of African dust input agrees with deep-sea records off the coast of western Africa that imply increased dust fluxes to the eastern Atlantic Ocean at ~4.6 Ma. It is concluded that the Sahara Desert has been in existence as an arid-region dust source, at least intermittently, for much of the Pliocene and continuing into the Pleistocene.

Canary Islands

Aeolian dust in Colorado Plateau soils: Nutrient inputs and recent change in source

Aeolian dust (windblown silt and clay) is an important component in arid-land ecosystems because it may contribute to soil formation and furnish essential nutrients. Few geologic surfaces, however, have been characterized with respect to dust-accumulation history and resultant nutrient enrichment. We have developed a combination of methods to identify the presence of aeolian dust in arid regions and to evaluate the roles of this dust in ecosystem processes. Unconsolidated sandy sediment on isolated surfaces in the Canyonlands region of the Colorado Plateau differs greatly in mineralogical and chemical composition from associated bedrock, mainly aeolian sandstone. Detrital magnetite in the surficial deposits produces moderately high values of magnetic susceptibility, but magnetite is absent in nearby bedrock. A component of the surficial deposits must be aeolian to account for the abundance of magnetite, which formed originally in far-distant igneous rocks. Particle-size analysis suggests that the aeolian dust component is typically as much as 20–30%. Dust inputs have enriched the sediments in many elements, including P, Mg, Na, K, and Mo, as well as Ca, at sites where bedrock lacks calcite cement. Soil-surface biologic crusts are effective dust traps that apparently record a change in dust sources over the past several decades. Some of the recently fallen dust may result from human disturbance of land surfaces that are far from the Canyonlands, such as the Mojave Desert. Some land-use practices in the study area have the potential to deplete soil fertility by means of wind-erosion removal of aeolian silt. Many studies have addressed the presence of aeolian dust in soils and surficial deposits in deserts to provide important geologic and ecologic information bearing on landscape dynamics (1–16). From this body of work, we have improved understanding about: ( i ) current and past sources and flux of dust, hence changing conditions of dust emission; ( ii ) the genesis of desert soils; ( iii ) the influences of aeolian silt and clay on water-infiltration rates in soil; ( iv ) the evolution of desert surfaces (such as desert pavement) relevant to surface stability, as well as the distribution of surface and subsurface water; and ( v ) interrelations among aeolian dust, distribution of plants and soil crust, rain-water runoff, and productivity. Nevertheless, we lack fundamental knowledge about the accumulation history of aeolian dust on most landscapes and about how to discriminate between contributions from parent material and aeolian dust to the biotic system. Although many different methods provide clear evidence for aeolian input into soils (4, 6, 8, 9, 11, 13, 17, 18), ecosystem studies would benefit from rapid assessment of aeolian components in soils. Here we demonstrate that magnetic methods, which characterize the type and distribution of iron oxide minerals, can be applied to detect the presence of aeolian dust in young surficial sediments and soils over large arid-land areas. The magnetic results, combined with geochemical and textural analyses, form a basis for understanding the influence of fine-grained aeolian inputs on soil fertility of the central Colorado Plateau, Utah.

Utah

Paleomagnetism and environmental magnetism of GLAD800 sediment cores from Bear Lake, Utah and Idaho

A ???220,000-year record recovered in a 120-m-long sediment core from Bear Lake, Utah and Idaho, provides an opportunity to reconstruct climate change in the Great Basin and compare it with global climate records. Paleomagnetic data exhibit a geomagnetic feature that possibly occurred during the Laschamp excursion (ca. 40 ka). Although the feature does not exhibit excursional behavior (???40?? departure from the expected value), it might provide an additional age constraint for the sequence. Temporal changes in salinity, which are likely related to changes in freshwater input (mainly through the Bear River) or evaporation, are indicated by variations in mineral magnetic properties. These changes are represented by intervals with preserved detrital Fe-oxide minerals and with varying degrees of diagenetic alteration, including sulfidization. On the basis of these changes, the Bear Lake sequence is divided into seven mineral magnetic zones. The differing magnetic mineralogies among these zones reflect changes in deposition, preservation, and formation of magnetic phases related to factors such as lake level, river input, and water chemistry. The occurrence of greigite and pyrite in the lake sediments corresponds to periods of higher salinity. Pyrite is most abundant in intervals of highest salinity, suggesting that the extent of sulfidization is limited by the availability of SO 4 2- . During MIS 2 (zone II), Bear Lake transgressed to capture the Bear River, resulting in deposition of glacially derived hematite-rich detritus from the Uinta Mountains. Millennial-scale variations in the hematite content of Bear Lake sediments during the last glacial maximum (zone II) resemble Dansgaard-Oeschger (D-O) oscillations and Heinrich events (within dating uncertainties), suggesting that the influence of millennial-scale climate oscillations can extend beyond the North Atlantic and influence climate of the Great Basin. The magnetic mineralogy of zones IV-VII (MIS 5, 6, and 7) indicates varying degrees of post-depositional alteration between cold and warm substages, with greigite forming in fresher conditions and pyrite in the more saline conditions. Copyright ?? 2009 The Geological Society of America.

Special Paper of the Geological Society of America

Evidence from xenoliths for a dynamic lower crust, eastern Mojave Desert, California

Garnet-rich xenoliths in a Tertiary dike in the eastern Mojave Desert, California, preserve information about the nature and history of the lower crust. These xenoliths record pressures of ∼ 10–12 kbar and temperatures of ∼ 750–800°C. Approximately 25% have mafic compositions and bear hornblende + plagioclase + clinopyroxene + quartz in addition to garnet. The remainder, all of which contain quartz, include quartzose, quartzofeldspathic, and aluminous (kyanite±sillimanite-bearing) varieties. Most xenoliths have identifiable protoliths—mafic from intermediate or mafic igneous rocks, quartzose from quartz-rich sedimentary rocks, aluminous from Al-rich graywackes or pelites, and quartzofeldspathic from feldspathic sediments and/or intermediate to felsic igneous rocks. However, many have unusual chemical compositions characterized by high FeO(t), FeO(t)/MgO, Al 2 O 3 , and Al 2 O 3 /CaO, which correspond to high garnet abundance. The mineralogy and major-and trace-element compositions are consistent with the interpretation that the xenoliths are the garnet-rich residues of high-pressure crustal melting, from which granitic melt was extracted. High 87 Sr/ 86 Sr and low 143 Nd/ 144 Nd, together with highly discordant zircons from a single sample with Pb/Pb ages of ∼ 1.7 Ga, demonstrate that the crustal material represented by the xenoliths is at least as old as Early Proterozoic. This supracrustal-bearing lithologic assemblage may have been emplaced in the lower crust during either Proterozoic or Mesozoic orogenesis, but Sr and Nd model ages> 4 Ga require late Phanerozoic modification of parent/daughter ratios, presumably during the anatectic event. Pressures of equilibration indicate that peak metamorphism and melting occurred before the Mojave crust had thinned to its current thickness of <30 km. The compositions of the xenoliths suggest that the lower crust here is grossly similar to estimated world-wide lower-crustal compositions in terms of silica and mafic content; however, it is considerably more peraluminous, has a lower mg -number, and is distinctive in some trace element concentrations, reflecting its strong metasedimentary and restitic heritage.

Journal of Petrology

Aluminum mobility in mildly acidic mine drainage: Interactions between hydrobasaluminite, silica and trace metals from the nano to the meso-scale

Aluminum precipitates control the hydrochemistry and mineralogy of a broad variety of environments on Earth (e.g., acid mine drainage, AMD, coastal wetlands, boreal and alpine streams, tropical acid sulfate soils, laterites and bauxites, …). However, the geochemical and mineralogical processes controlling Al (and other associated metals and metalloids) transport and removal in those environments are not fully understood. The geochemical system of Paradise Portal (Colorado, USA) comprises sulfate-rich mildly acidic waters, the hydrochemistry of which is directly controlled by the massive precipitation of hydrobasaluminite Al 4 (SO 4 )(OH) 10 ·12-36H 2 O. Three connected but discernible aluminum precipitation stages were identified and described: 1) nanoparticle formation and size decrease along the creek, 2) hydrobasaluminite neoformation on the riverbed, and 3) precipitate accretion and accumulation on the riverbed leading to Al and Fe banded formations. The co-occurrence of Al and Si in the system was observed, recording significant amounts of Si accompanying the three different components of the system (i.e., nanoparticles and fresh and aged Al-precipitates). Also, abrupt and minor changes in the sedimentary record were described and proposed to be the response of the system to seasonal and interannual changes in AMD chemistry. Concerning the mobility of other metals and metalloids, P, Th, V, W, Ti and B showed a tendency to be preferentially incorporated into hydrobasaluminite, while others like Be, As, Se or Ba tend to remain dissolved in the water.

Chemical Geology

Tracking the timing of subduction and exhumation using 40 Ar/ 39 Ar phengite ages in blueschist- and eclogite-facies rocks (Sivrihisar, Turkey)

Geochronologic studies of high-pressure/low-temperature rocks can be used to determine the timing and rates of burial and exhumation in subduction zones by dating different stages of the pressure–temperature history. In this study, we present new in situ UV laser ablation 40 Ar/ 39 Ar phengite ages from a suite of lawsonite blueschist- and eclogite-facies rocks representing different protoliths (metabasalt, metasediment), different structural levels (within and outside of a high-strain zone), and different textural positions (eclogite pod core vs. margin) to understand the timing of these events in an exhumed Neo-Tethyan subduction zone (Sivrihisar Massif, Tavşanlı Zone, Turkey). Weighted mean in situ 40 Ar/ 39 Ar ages of phengite from the cores of lawsonite eclogite pods (90–93 Ma) are distinctly older than phengite from retrogressed, epidote eclogite (82 ± 2 Ma). These ages are interpreted as the age of peak and retrograde metamorphism, respectively. Eclogite records the narrowest range of ages (10–14 m.y.) of any rock type analyzed. Transitional eclogite- and blueschist-facies assemblages and glaucophane-rimmed lawsonite + garnet + phengite veins from eclogite pod margins record a much wider age range of 40 Ar/ 39 Ar ages (~20 m.y.) with weighted mean ages of ~91 Ma. Blueschists and quartzites record more variable 40 Ar/ 39 Ar ages that may in part be related to structural position: samples within a high-strain zone at the tectonic contact of the HP rocks with a meta-ultramafic unit have in situ UV laser ablation 40 Ar/ 39 Ar ages of 84.0 ± 1.3–103.7 ± 3.1 Ma, whereas samples outside this zone range to older ages (84.6 ± 2.4–116.7 ± 2.7 Ma) and record a greater age range (22–38 m.y.). The phengite ages can be correlated with the preservation of HP mineral assemblages and fabrics as well as the effects of deformation. Collectively, these results show that high-spatial resolution UV laser ablation 40 Ar/ 39 Ar phengite data, when considered in a petrologic and structural context, may document prograde (burial) and retrograde (exhumation) stages of subduction metamorphism.

Contributions to Mineralogy and Petrology

Major thermal springs of Utah

As part of a study of the springs of Utah, reconnaissance data were obtained on the thermal, chemical, and geologic characteristics of the major thermal springs or Utah. Only three of the springs have temperatures near the boiling point of water; the maximum recorded temperatures of these springs range from 185° to 189° F. All three springs are in or near areas of late Tertiary or Quaternary volcanism. Temperatures of the thermal springs studied ranged from 68° to 189° F. Nearly all thermal springs in Utah are in or near fault zones. Very few of these springs issue from volcanic rocks, but several springs are close to areas of late Tertiary or Quaternary volcanic rocks.

Utah

Magmatic ore deposits in layered intrusions - Descriptive model for reef-type PGE and contact-type Cu-Ni-PGE deposits

Layered, ultramafic to mafic intrusions are uncommon in the geologic record, but host magmatic ore deposits containing most of the world's economic concentrations of platinum-group elements (PGE) (figs. 1 and 2). These deposits are mined primarily for their platinum, palladium, and rhodium contents (table 1). Magmatic ore deposits are derived from accumulations of crystals of metallic oxides, or immiscible sulfide, or oxide liquids that formed during the cooling and crystallization of magma, typically with mafic to ultramafic compositions. "PGE reefs" are stratabound PGE-enriched lode mineralization in mafic to ultramafic layered intrusions. The term "reef" is derived from Australian and South African literature for this style of mineralization and used to refer to (1) the rock layer that is mineralized and has distinctive texture or mineralogy (Naldrett, 2004), or (2) the PGE-enriched sulfide mineralization that occurs within the rock layer. For example, Viljoen (1999) broadly defined the Merensky Reef as "a mineralized zone within or closely associated with an unconformity surface in the ultramafic cumulate at the base of the Merensky Cyclic Unit." In this report, we will use the term PGE reef to refer to the PGE-enriched mineralization, not the host rock layer. Within a layered igneous intrusion, reef-type mineralization is laterally persistent along strike, extending for the length of the intrusion, typically tens to hundreds of kilometers. However, the mineralized interval is thin, generally centimeters to meters thick, relative to the stratigraphic thickness of layers in an intrusion that vary from hundreds to thousands of meters. PGE-enriched sulfide mineralization is also found near the contacts or margins of layered mafic to ultramafic intrusions (Iljina and Lee, 2005). This contact-type mineralization consists of disseminated to massive concentrations of iron-copper-nickel-PGE-enriched sulfide mineral concentrations in zones that can be tens to hundreds of meters thick. The modes and textures of the igneous rocks hosting the mineralization vary irregularly on the scale of centimeters to meters; autoliths and xenoliths are common. Mineralization occurs in the igneous intrusion and in the surrounding country rocks. Mineralization can be preferentially localized along contact with country rocks that are enriched in sulfur-, iron-, or CO2-bearing lithologies. Reef-type and contact-type deposits, in particular those in the Bushveld Complex, South Africa, are the world's primary source of platinum and rhodium (tables 2 and 3; fig. 2). Reef-type PGE deposits are mined only in the Bushveld Complex (Merensky Reef and UG2), the Stillwater Complex (J-M Reef), and the Great Dyke (Main Sulphide Layer). PGE-enriched contact-type deposits are only mined in the Bushveld Complex. The other deposits in tables 2 and 3 are undeveloped; some are still under exploration.

Open-File Report

Four-dimensional thermal evolution of the East African Orogen: Accessory phase petrochronology of crustal profiles through the Tanzanian Craton and Mozambique Belt, northeastern Tanzania

U–Pb petrochronology of deep crustal xenoliths and outcrops across northeastern Tanzania track the thermal evolution of the Mozambique Belt and Tanzanian Craton following the Neoproterozoic East African Orogeny (EAO) and subsequent Neogene rifting. At the craton margin, the upper–middle crust record thermal quiescence since the Archean (2.8–2.5 Ga zircon, rutile, and apatite in granite and amphibolite xenoliths). The lower crust of the craton documents thermal pulses associated with Neoarchean ultra-high temperature metamorphism (ca. 2.64 Ga, > 900 °C zircon), the EAO (600–500 Ma rutile), and fluid influx during rifting (< 5 Ma apatite). Rutile in garnet granulite xenoliths exhibits partial Pb loss related to slow cooling of the lower crust after the EAO and suggests residence at 500–600 °C prior to entrainment. In contrast to the craton, the entire crust of the Mozambique Belt underwent differential cooling following the EAO. Both the upper and middle crust record metamorphism from 640 to 560 Ma (zircon, monazite, and titanite) and rapid exhumation at 510–440 Ma (rutile and apatite). Lower crustal xenoliths contain Archean zircon, but near-zero age rutile and apatite, indicating residence > 650 °C (above Pb closure of rutile and apatite) at the time of eruption. Zoned titanite records growth during cooling of the lower crust at 550 Ma, followed by fluid influx during slow cooling and exhumation (0.1–1 °C/Myr after 450 Ma). Permissible lower-crustal temperatures for the craton and orogen suggest variable mantle heat flow through the crust and reflect differences in mantle lithosphere thickness rather than advective heating from rifting.

Contributions to Mineralogy and Petrology

The Novarupta-Katmai eruption of 1912 - largest eruption of the twentieth century; centennial perspectives

The explosive outburst at Novarupta (Alaska) in June 1912 was the 20th century's most voluminous volcanic eruption. Marking its centennial, we illustrate and document the complex eruptive sequence, which was long misattributed to nearby Mount Katmai, and how its deposits have provided key insights about volcanic and magmatic processes. It was one of the few historical eruptions to produce a collapsed caldera, voluminous high-silica rhyolite, wide compositional zonation (51-78 percent SiO 2 ), banded pumice, welded tuff, and an aerosol/dust veil that depressed global temperature measurably. It emplaced a series of ash flows that filled what became the Valley of Ten Thousand Smokes, sustaining high-temperature metal-transporting fumaroles for a decade. Three explosive episodes spanned ~60 hours, depositing ~17 km 3 of fallout and 11&plusmn;2 km 3 of ignimbrite, together representing ~13.5 km 3 of zoned magma. No observers were nearby and no aircraft were in Alaska, and so the eruption narrative was assembled from scattered villages and ship reports. Because volcanology was in its infancy and the early investigations (1915-23) were conducted under arduous expeditionary conditions, many provocative misapprehensions attended reports based on those studies. Fieldwork at Katmai was not resumed until 1953, but, since then, global advances in physical volcanology and chemical petrology have gone hand in hand with studies of the 1912 deposits, clarifying the sequence of events and processes and turning the eruption into one of the best studied in the world. To provide perspective on this century-long evolution, we describe the geologic and geographic setting of the eruption - in a remote, sparsely inhabited wilderness; we review the cultural and scientific contexts at the time of the eruption and early expeditions; and we compile a chronology of the many Katmai investigations since 1912. Products of the eruption are described in detail, including eight layers of regionwide fallout, nine packages of ash flows, and three lava domes that followed the explosive pyroclastic episodes. Changes in the proportions of coerupting rhyolite, dacite, and andesite pumice documented for the fallout and ash-flow successions, which are locally interbedded, permit close correlation of those synchronously emplaced sequences and their varied facies. Petrological correlation of the sequence of deposits near Novarupta with ash layers at Kodiak village, 170 km downwind, where three episodes of ashfall were recorded (to the hour), provides key constraints on timing of the eruptive events. Syneruptive collapse of a kilometer-deep caldera took place atop Mount Katmai, a stratovolcano centered 10 km east of the eruption site at Novarupta, owing to drainage of magma from beneath the Katmai edifice. Correlation of ~50 earthquakes recorded at distant seismic stations (including 14 shocks of magnitude 6.0 to 7.0) to fitful caldera collapse provides further constraints on eruption timing, because layers of nonjuvenile breccia and mud ejected from Mount Katmai during collapse pulses are intercalated with the pumice-fall layers from Novarupta. Structure of the Novarupta vent, a 2-km-wide depression backfilled by welded tuff and inferred to be funnel-shaped at depth, is described in detail, as is the 4-km-wide caldera at Mount Katmai. Discussions are also provided concerning: (1) the impact on global climate of the great mass of sulfur-poor but halogen-rich aerosol ejected into the atmosphere by the rhyolite-dominated eruption; (2) chemical and mineralogical effects of the fumarolic acid gases; and (3) the timing of several syneruptive landslide deposits sandwiched within the pumice-fall sequence. Secondary posteruption phenomena characterized include impounded lakes, ash-rich debris flows, phreatic craters on the ignimbrite sheet, responses of glaciers to the fallout blanket and to beheading by caldera collapse, growth of new glaciers inside the caldera, and gradual filling of the caldera lake. Structure, composition, and ages of the several andesite-dacite stratovolcanoes, closely clustered near Novarupta, all of which remain fumarolically and seismically active, are summarized. But among them only Mount Katmai extends compositionally to include basalt and rhyolite. The petrological affinities of 1912 magmas erupted at Novarupta with pre-1912 Katmai lavas are outlined, and various chemical, mineralogical, isotopic, and experimental data are assembled to construct a model of preeruptive magma storage beneath Mount Katmai. The monograph concludes by comparing the 1912 eruption with several other well-studied large explosive eruptions, 14 of them historical and 9 prehistoric. Finally, we retrospectively review the historical difficulties in understanding what had actually taken place at Katmai in 1912 and the century of progress in volcano science that has allowed most of it to be figured out.

Alaska;British Columbia;Washington;Yukon

Reflecting curved-crystal X-ray spectrograph; a device for the analysis of small mineral samples

A curved-crystal reflecting spectrometer of the type described by Birks and Brooks of the Naval Research Laboratories, but adapted for use in mineralogical studies, has been built in the Geological Survey. It has been successfully applied to the analysis of tiny crystals, zones in minerals, and individual grains in mixed-mineral specimens such as thin or polished sections, on grains or areas about 0.5 mm in diameter, X-ray diffraction spindles, and small samples of powder weighing a fraction of a milligram have also been analyzed without any loss or alteration of the sample. Of great value in thin- and polished-section work is the fact that this technique can be used to analyze selected areas without mutilating the specimen by digging out grains.A modification of the curved-crystal spectrometer has made it possible to traverse a standard polished section in synchronization with a recorder, automatically plotting the distribution of various elements along a selected line. This method was applied, for example, to a polished section containing a central core of pyrite intergrown with and surrounded by a marcasite-like mineral. Chemical analysis of a concentrate of these two minerals gave selenium, cobalt, and iron as major constituents. A clear relationship between the cobalt, selenium, and iron was established by the X-ray method, identifying the second mineral as an intermediate member of the FeSe 2 -CoSe 2 series.

Economic Geology

Authigenic mineral texture in submarine 1979 basalt drill core, Surtsey volcano, Iceland

Micrometer-scale maps of authigenic microstructures in submarine basaltic tuff specimens from a 1979 Surtsey volcano, Iceland, drill core acquired 15 years after eruptions terminated provide fresh perspectives for deciphering the initial alteration of oceanic basalt in a low temperature hydrothermal system. A novel investigative approach integrates synchrotron source X-ray microdiffraction (µXRD), X-ray microfluoresence (µXRF), micro-computed tomography (µCT), and scanning transmission electron microscopy (S/TEM) coupled with Raman spectroscopy to create finely resolved spatial frameworks that record a continuum of alteration in glass and olivine. Micro-analytical maps of vesicular and fractured lapilli in specimens from 157.1, 137.9, and 102.6 m depth, and borehole temperatures of 83, 93.9 and 141.3 °C measured in 1980, respectively, record the production of nanocrystalline clay mineral, zeolites, and Al-tobermorite in diverse microenvironments. Nanocrystalline clay mineral (nontronite) and zeolite (amicite) texture in linear microstructures have concentrically-oriented crystallographic preferred orientation. Raman spectra indicating degraded organic carbonaceous matter are associated with nanocrystalline clay mineral in 10–25 nm, sub-circular nanoscale cavities in altered glass at 137.9 m depth and in a concentrically-layered, crystallographically-oriented linear microstructure in altered olivine at 102.6 m. These features have little resemblance to previously described alteration features in basalt. Irregular alteration fronts between fresh and altered glass at 157.1 depth, however, show a resemblance to microchannels in older basalts. The integrated analyses describe the complex organization of previously unrecognized mineral textures in very young basalt and provide a foundational mineralogical reference for longitudinal, time-lapse characterizations of palagonitized basalt in oceanic environments.

Geochemistry, Geophysics, Geosystems

Compositional variation in the chevkinite group: new data from igneous and metamorphic rocks

Electron microprobe analyses are presented of chevkinite-group minerals from Canada, USA, Guatemala, Norway, Scotland, Italy and India. The host rocks are metacarbonates, alkaline and subalkaline granitoids, quartz-bearing pegmatites, carbonatite and an inferred K-rich tuff. The analyses extend slightly the range of compositions in the chevkinite group, e.g. the most MgO-rich phases yet recorded, and we report two further examples where La is the dominant cation in the A site. Patchily- zoned crystals from Virginia and Guatemala contain both perrierite and chevkinite compositions. The new and published analyses are used to review compositional variation in minerals of the perrierite subgroup, which can form in a wide range of host rock compositions and over a substantial pressure- temperature range. The dominant substitutions in the various cation sites and a generalized substitution scheme are described.

Mineralogical Magazine