USGS Science⌕ Search

SEARCH · USGS Science

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59Linked to original sources

Volcanic processes and geology of Augustine Volcano, Alaska

Augustine Island (volcano) in lower Cook Inlet, Alaska, has erupted repeatedly in late-Holocene and historical times. Eruptions typically beget high-energy volcanic processes. Most notable are bouldery debris avalanches containing immense angular clasts shed from summit domes. Coarse deposits of these avalanches form much of Augustine's lower flanks. A new geologic map at 1:25,000 scale depicts these deposits, these processes. We correlate deposits by tephra layers calibrated by many radiocarbon dates.Augustine Volcano began erupting on the flank of a small island of Jurassic clastic-sedimentary rock before the late Wisconsin glaciation (late Pleistocene). The oldest known effusions ranged from olivine basalt explosively propelled by steam, to highly explosive magmatic eruptions of dacite or rhyodacite shed as pumice flows. Late Wisconsin piedmont glaciers issuing from the mountainous western mainland surrounded the island while dacitic eruptive debris swept down the south volcano flank.Evidence is scant for eruptions between the late Wisconsin and about 2,200 yr B.P. On a few south-flank inliers, thick stratigraphically low pumiceous pyroclastic-flow and fall deposits probably represent this period from which we have no radiocarbon dates on Augustine Island. Eruptions between about 5,350 and 2,200 yr B.P. we know with certainty by distal tephras. On Shuyak Island 100 km southeast of Augustine, two distal fall ashes of Augustinian chemical provenance (microprobe analysis of glass) date respectively between about 5,330 and 5,020 yr B.P. and between about 3,620 and 3,360 yr B.P. An Augustine ash along Kamishak Creek 70 km southwest of Augustine dates between about 3,850 and 3,660 yr B.P. A probably Augustinian ash lying within peat near Homer dates to about 2,275 yr B.P.From before 2,200 yr B.P. to the present, Augustine eruptive products abundantly mantle the island. During this period, numerous coarse debris avalanches swept beyond Augustine's coast, most recently in A.D. 1883. The decapitated summit after the 1883 eruption, replaced by andesite domes of six eruptions since, shows a general process: collapse of steep summit domes, then the summit regrown by later dome eruptions. The island's stratigraphy is based on six or seven coarse-pumice tephra "marker beds." In upward succession they are layers G (2,100 yr B.P.), I (1,700 yr B.P.), H (1,400 yr B.P.), C (1,200-1,000 yr B.P.), M (750 yr B.P.), and B (390 yr B.P.).A coarse, hummocky debris-avalanche deposit older than about 2,100 yr B.P.-or perhaps a stack of three of them-lies along the east coast, the oldest exposed such bouldery diamicts on Augustine Island. Two large debris avalanches swept east and southeast into the sea between about 2,100 and 1,800 yr B.P. A large debris avalanche shed east and east-northeast into the sea between 1,700 and 14,00 yr B.P.Between about 1,400 and 1,100 yr B.P. debris avalanches swept into the sea on the volcano's south, southwest, and north-northwest. Pumiceous pyroclastic fans spread to the southeast and southwest, lithic pyroclastic flows and lahars (?) to the south and southeast. Pyroclastic flows, pyroclastic surges, and lahars swept down the west and south flanks between about 1,000 and 750 yr B.P.A debris avalanche swept into the sea on the west, and a small one on the south-southeast, between about 750 and 400 yr B.P. Large lithic pyroclastic flows shed to the southeast; smaller ones descended existing swales on the southwest and south.Between about 400 yr B.P. and historical time (late 1770s), three debris avalanches swept into the sea on the west-northwest, north-northwest, and north flanks. One of them (West Island) was large and fast: most of it rode to sea far beyond a former sea cliff, and its surface includes geomorphic evidence of having initiating a tsunami. Augustine's only conspicuous lava flow erupted on the north flank.During this prehistoric period numerous domes grew at the volcano's summit, remnants of which form the east and south sides of the present summit-dome complex. Three domes grew below the summit area on the upper south and northwest flanks. In between large eruptions that deposited coarse pumiceous fall beds, many smaller eruptions emplaced beds of sand-sized ash on the volcano flanks.During the past 750 years, beach and back-beach eolian dunes accreted at the southwest coast, forming a ribbed coastwise topography. Lesser dunes grew at the backs of beaches in coves on other flanks.An eruption in 1883 shed a debris avalanche swiftly into the sea on the north-northeast, followed by pyroclastic flows and surges. Eruptions in 1935 and 1963-64 grew summit domes that spilled over the southwest and south flanks and shed coarse rubbly lithic pyroclastic flows down those flanks. Eruptions and 1976 and 1986 grew domes that draped down the north flank and shed voluminous pyroclastic flows to the northeast through north-northwest flanks, when smaller pyroclastic flows and (or) lahars swept down other flanks. A small dome-building eruption in January-March 2006 after this report was all but complete we treat only fleetingly. The largest debris avalanches sweep into the sea at Augustine's coast at speeds inferred between 60 and 80 m/s. Augustine is capable of initiating damaging tsunami to lower Cook Inlet, but geologic evidence for them on the mainland is sporadic and sparse.

Alaska↗

Sediment-hosted lead-zinc deposits: A global perspective

Sediment-hosted Pb-Zn deposits contain the world’s greatest lead and zinc resources and dominate worldproduction of these metals. They are a diverse group of ore deposits hosted by a wide variety of carbonate andsiliciclastic rocks that have no obvious genetic association with igneous activity. A range of ore-forming processes in a variety of geologic and tectonic environments created these deposits over at least two billion years of Earth history. The metals were precipitated by basinal brines in synsedimentary and early diagenetic to low-grade metamorphic environments. The deposits display a broad range of relationships to enclosing host rocks that includes stratiform, strata-bound, and discordant ores. These ores are divided into two broad subtypes: Mississippi Valley-type (MVT) and sedimentary exhalative (SEDEX). Despite the “exhalative” component inherent in the term “SEDEX,” in this manuscript, direct evidence of an exhalite in the ore or alteration component is not essential for a deposit to be classified as SEDEX. The presence of laminated sulfides parallel to bedding is assumed to be permissive evidence for exhalative ores. The distinction between some SEDEX and MVT deposits can be quite subjective because some SEDEX ores replaced carbonate, whereas some MVT deposits formed in an early diagenetic environment and display laminated ore textures. Geologic and resource information are presented for 248 deposits that provide a framework to describe and compare these deposits. Nine of the 10 largest sediment-hosted Pb-Zn deposits are SEDEX. Of the deposits that contain at least 2.5 million metric tons (Mt), there are 35 SEDEX (excluding Broken Hill-type) deposits and 15 MVT (excluding Irish-type) deposits. Despite the skewed distribution of the deposit size, the two deposits types have an excellent correlation between total tonnage and tonnage of contained metal (Pb + Zn), with a fairly consistent ratio of about 10/1, regardless of the size of the deposit or district. Zinc grades are approximately the same for both, whereas Pb and Ag grades are about 25 percent greater for SEDEX deposits. The largest difference between SEDEX and MVT deposits is their Cu content. Three times as many SEDEX deposits have reported Cu contents, and the median Cu value of SEDEX deposits is nearly double that of MVT deposits. Furthermore, grade-tonnage values for MVT deposits compared to a subset of SEDEX deposits hosted in carbonate rocks are virtually indistinguishable. The distribution of MVT deposits through geologic time shows that they are mainly a Phanerozoic phenomenon. The ages of SEDEX deposits are grouped into two major groups, one in the Proterozoic and another in the Phanerozoic. MVT deposits dominantly formed in platform carbonate sequences typically located within extensional zones inboard of orogenic belts, whereas SEDEX deposits formed in intracontinental or failed rifts, and rifted continental margins. The ages of MVT ores are generally tens of millions of years younger than their host rocks; however, a few are close (<~5 m.y.) to the age of their host rocks. In the absence of direct dates for SEDEX deposits, their age of formation is generally constrained by relationships to sedimentary or diagenetic features in the rocks. These studies suggest that deposition of SEDEX ores was coeval with sedimentation or early diagenesis, whereas some deposits formed at least 20 m.y. after sedimentation. Fluid inclusion, isotopic studies, and deposit modeling suggest that MVT and SEDEX deposits formed from basin brines with similar temperatures of mainly 90° to 200°C and 10 to 30 wt percent NaCl equiv. Lead isotope compositions for MVT and SEDEX deposits show that Pb was mainly derived from a variety of crustal sources. Lead isotope compositions do not provide criteria that distinguish MVT from SEDEX subtypes. However, sulfur isotope compositions for sphalerite and galena show an apparent difference. SEDEX and MVT sulfur isotope compositions extend over a large range; however, most data for SEDEX ores have mainly positive isotopic compositions from 0 to 20 per mil. Isotopic values for MVT ores extend over a wider range and include more data with negative isotopic values. Given that there are relatively small differences between the metal character of MVT and SEDEX deposits and the fluids that deposited them, perhaps the most significant difference between these deposits is their de-positional environment, which is determined by their respective tectonic settings. The contrasting tectonic setting also dictates the fundamental deposit attributes that generally set them apart, such as host-rock lithology, deposit morphology, and ore textures. Brief discussions are also presented on two controversial sets of deposits: Broken Hill-type deposits and a subset of deposits in the MVT group located in the Irish Midlands, considered by some authors to be a distinct ore type (Irish type). There are no significant differences in grade tonnage values between MVT deposits and the subset that is described as Irish type. Most features of the Irish deposits are not distinct from the family of MVT deposits; however, the age of mineralization that is the same as or close to the age of the host rocks and the anomalously high fluid inclusion temperatures (up to 250°C) stand out as distinctly different from typical MVT ores. The dominance of bacteriogenic sulfur in the Irish ores commonly ascribed as uniquely Irish type is in fact no different from several MVT deposits or districts. A comparison of SEDEX and Broken Hill-type deposits shows that the latter deposits contain significantly higher contents of Ag and Pb relative to SEDEX deposits. In terms of median values, Broken Hill-type deposits are almost three times more enriched in Ag and one and a half times more enriched in Pb compared to other SEDEX deposits. Metamorphism is a characteristic feature but not a prerequisite for inclusion in the Broken Hill-type category, and known Broken Hill-type examples appear to occur in Paleo- to Mesoprotero-zoic terranes. Broken Hill-type deposits remain an enigmatic grouping; however, there is sufficient evidence to support their inclusion as a separate category of SEDEX deposits.

Book chapter↗

Aquifers of the Denver Basin, Colorado

Development of the Denver Basin for water supply has been ongoing since the late 1800s. The Denver Basin aquifer system consists of the water-yielding strata of Tertiary and Cretaceous sedimentary rocks within four overlying formations. The four statutory aquifers contained in these formations are named the Dawson, Denver, Arapahoe, and Laramie-Fox Hills. For water rights administrative purposes, the outcrop/subcrop of the Laramie-Fox Hills aquifer defines the margins of the Basin. Initial estimates of the total recoverable groundwater reserves in storage, under this 6700-mi2 area, were 295 million acre-ft. Recent geologic evidence indicates that the aquifers are very heterogeneous and their composition varies significantly with distance from the source area of the sediments. As a result, available recoverable reserves may be one-third less than previously estimated. There is no legal protection for pressure levels in the aquifer, and water managers are becoming increasingly concerned about the rapid water level declines (30 ft/yr). Approximately 33,700 wells of record have been completed in the sedimentary rock aquifers of the Denver Basin for municipal, industrial, agricultural, and domestic uses.

Mountain Geologist↗

Geology and undiscovered resource assessment of the potash-bearing, Middle Devonian (Givetian), Prairie Evaporite, Elk Point Basin, Canada and United States

The U.S. Geological Survey (USGS) assessed undiscovered potash resources in the Elk Point Basin in Canada and the United States as part of a global mineral resource assessment. The Elk Point Basin is a large, Middle Devonian (Givetian) intracratonic evaporite basin covering approximately 1,200,000 square kilometers (km 2 ) and filled mainly with marine evaporite and minor clastic sedimentary rocks that contain stratabound potash-bearing salt. The potash-bearing salt is concentrated in four stratigraphic members (Patience Lake, Belle Plaine, White Bear, and Esterhazy) in the upper 100 meters (m) of the Prairie Evaporite and are separated by beds of halite (NaCl) that contain lesser—presently non-economic—amounts of sylvite (KCl) and carnallite (KMgCl 3 ·6H 2 O). The principal ore-bearing salt contains mainly sylvite. Four permissive tracts were defined that permit the presence of undiscovered stratabound potash (both sylvite- and carnallite-bearing salt) using geological criteria. Permissive tracts are defined by the spatial extent of each stratigraphic member that is at least 1 m thick, are less than 3 kilometers (km) from the surface, contain at least 4 percent equivalent potassium oxide (K 2 O), and contain the currently known resources. The permissive tracts include known potash deposits and potash occurrences as wells or mines not in production and show where undiscovered potash resources may be present. Well data are used to define the extent, thickness, average K 2 O equivalent grades, and volumes of each member. Data were supplied by the Saskatchewan Geological Survey or were obtained from published National Instrument (NI) 43-101 technical reports and other published reports, such as annual 10-K reports or news releases. The Elk Point Basin is the world’s largest source of potash, producing 23.0 million metric tons (Mt) of potassium chloride (KCl) (the equivalent of about 14.4 Mt of K 2 O) in 2018. In terms of global importance, the Elk Point Basin may contain 40 to greater than 50 percent of the world’s potash resources. Since 1962, potash companies have mined more than 1.5 trillion metric tons of ore containing 605 Mt of KCl (the equivalent of about 380 Mt of K 2 O). The total value of the ore produced through 2018 is on the order of $70 trillion (CAD). Potash is currently produced from eight conventional and three underground solution mines at depths ranging from 900 m to nearly 1,800 m. Estimates of the amount of potash in the Elk Point Basin vary considerably and the data and methods used in those estimations are not well documented. Known potash resources are approximately 99 billion metric tons (Bt) of ore containing 22 Bt of K 2 O equivalent. As a result of new mine openings and increased production capacity at existing mines, the total production capacity of mines in the Elk Point Basin has increased significantly (to about 32.8 Mt of KCl or 22.8 Mt of K 2 O equivalent per year). Additional production capacity of about 31 Mt of KCl (or 17 Mt of K 2 O equivalent) per year could be realized over the next decade if several current (as of 2019) exploration and development projects reach production status. Stratabound potash-bearing salt of the Prairie Evaporite presently underlies a total area of about 188,000 km 2 and has a total volume of about 2,690 cubic kilometers (km 3 ). Post-depositional solution processes considerably modified the mineralogy and presence of the potash-bearing salt. These changes had a profound effect on the volume and grade of potash resources that remained in the Prairie Evaporite and are a major consideration of exploration and mining operations as well as in this assessment of undiscovered potash resources. This USGS assessment includes the locations and possible amounts of undiscovered potash resources in the Prairie Evaporite. Volumes for each stratigraphic member were computed using member thicknesses and areal extent modified by actual, estimated geologic loss owing to salt dissolution and extraction ratios, as well as estimated distribution of carnallite and sylvite. Both sylvite- and carnallite-bearing salts were assessed for potash in this study. The assessment uses modern published grade and tonnage data. The amount of undiscovered potash is estimated by using Monte Carlo simulations to combine volume estimates of the potash-bearing members with probability distributions for average grade and bulk density. Mean potash grades (expressed as percentage of K 2 O equivalent) calculated using drill core analyses are 17.76 for the Patience Lake Member, 15.98 for the Belle Plaine Member, 10.66 for the White Bear Member, and 15.30 for the Esterhazy Member. Geologic losses reported as extraction ratios during mining may range from 27.5 to 41.6 percent and are dependent on mining method and local geologic conditions. The assessment determined that mean estimated undiscovered K 2 O equivalent resources for the Patience Lake, Belle Plaine, White Bear, and Esterhazy Members are 340, 220, 34, and 190 Bt, respectively, and estimated a total mean of 790 Bt for the entire Prairie Evaporite above a depth of 3 km. The total mineralized rock tonnage is estimated to be about 5,000 Bt. Most of the assessed potash is located within Saskatchewan with lesser amounts in Alberta and Manitoba as well as Montana and North Dakota within the United States. Although carnallite is mined for potash in Europe, it has historically been avoided in mining plans for potash-producing companies in Saskatchewan because of mining, processing, and grade considerations. Carnallite-rich salt is locally present in concentrations and volumes that could be a significant resource of magnesium chloride (MgCl 2 ) obtained as a byproduct of processing the carnallite for potash. Previously estimated reserves (not NI 43-101 compliant) of mineralized material from 1955 to 2019 are 695 Mt at 22.1 percent MgCl 2 . The total amount of K 2 O equivalent as carnallite was estimated during this USGS assessment to be about 120 Bt (or 180 Bt KCl). With uncertainties in defining the areal extent of carnallite in each of the potash-bearing members, the amount of MgCl 2 as carnallite in the Elk Point Basin could be approximately 180 Bt.

Elk Point basin↗

Reconnaissance geology of the Jibal Matalli Quadrangle, sheet 27/40 D, Kingdom of Saudi Arabia

The Jibal Matalli quadrangle lies along the northern boundary of the Arabian Shield about 90 km west-southwest of Ha'il. The quadrangle consists of about 45 percent Precambrian bedrock, 50 percent Quaternary deposits, and 5 percent sedimentary cover rocks. The Precambrian rocks include volcaniclastic and volcanic rocks that are slightly metamorphosed and various granitic plutons. The volcaniclastic and volcanic rocks are correlated with the Hulayfah group and the Hadn formation. The older Hulayfah is principally basalt of probably submarine origin that has locally been metamorphosed to greenschist facies. The Hadn is composed of submarine and subaerial deposits. These consist of volcanic-derived sandstone and siltstone and lesser amounts of chiefly rhyolite volcanic rocks. In most areas, the Hadn shows little in the way of metamorphic effects, but locally it too has been metamorphosed to greenschist facies. The volcanic rocks of the Hadn include ash-flow tuffs; some appear to be water-laid, but others are subaerial. The oldest pluton is diorite, those of intermediate age are monzogranite and syenogranite, and the youngest are alkali feldspar granites. The largest pluton, a metaluminous, low-calcium, biotite monzogranite, occupies much of the southern part of the quadrangle. The alkali feldspar granites are mostly peralkaline; the two youngest are particularly so. The latter two are located in the southwest and southeast corners of the quadrangle, and both contain arfvedsonite and kataphorite. The pluton in the southeast grades outward from a peraluminous core to a peralkaline, comenditic peripheral zone and is inferred to be genetically related to a spectacular, west-trending comendite dike swarm in the southern half of the quadrangle. Two northeast-trending buried right-lateral faults are inferred in the quadrangle; one in the southeast and one in the northwest. The one in the northwest probably offsets the comendite dike swarm about 3 km. This fault appears to be part of a broad right-lateral fault and flexure zone that juxtaposes the Hadn formation on the west against the Hulayfah group on the east.

Open-File Report↗

Death Valley regional ground-water flow system, Nevada and California -- hydrogeologic framework and transient ground-water flow model

A numerical three-dimensional (3D) transient ground-water flow model of the Death Valley region was developed by the U.S. Geological Survey for the U.S. Department of Energy programs at the Nevada Test Site and at Yucca Mountain, Nevada. Decades of study of aspects of the ground-water flow system and previous less extensive ground-water flow models were incorporated and reevaluated together with new data to provide greater detail for the complex, digital model. A 3D digital hydrogeologic framework model (HFM) was developed from digital elevation models, geologic maps, borehole information, geologic and hydrogeologic cross sections, and other 3D models to represent the geometry of the hydrogeologic units (HGUs). Structural features, such as faults and fractures, that affect ground-water flow also were added. The HFM represents Precambrian and Paleozoic crystalline and sedimentary rocks, Mesozoic sedimentary rocks, Mesozoic to Cenozoic intrusive rocks, Cenozoic volcanic tuffs and lavas, and late Cenozoic sedimentary deposits of the Death Valley Regional Ground-Water Flow System (DVRFS) region in 27 HGUs. Information from a series of investigations was compiled to conceptualize and quantify hydrologic components of the ground-water flow system within the DVRFS model domain and to provide hydraulic-property and head-observation data used in the calibration of the transient-flow model. These studies reevaluated natural ground-water discharge occurring through evapotranspiration and spring flow; the history of ground-water pumping from 1913 through 1998; ground-water recharge simulated as net infiltration; model boundary inflows and outflows based on regional hydraulic gradients and water budgets of surrounding areas; hydraulic conductivity and its relation to depth; and water levels appropriate for regional simulation of prepumped and pumped conditions within the DVRFS model domain. Simulation results appropriate for the regional extent and scale of the model were provided by acquiring additional data, by reevaluating existing data using current technology and concepts, and by refining earlier interpretations to reflect the current understanding of the regional ground-water flow system. Ground-water flow in the Death Valley region is composed of several interconnected, complex ground-water flow systems. Ground-water flow occurs in three subregions in relatively shallow and localized flow paths that are superimposed on deeper, regional flow paths. Regional ground-water flow is predominantly through a thick Paleozoic carbonate rock sequence affected by complex geologic structures from regional faulting and fracturing that can enhance or impede flow. Spring flow and evapotranspiration (ET) are the dominant natural ground-water discharge processes. Ground water also is withdrawn for agricultural, commercial, and domestic uses. Ground-water flow in the DVRFS was simulated using MODFLOW-2000, a 3D finite-difference modular ground-water flow modeling code that incorporates a nonlinear least-squares regression technique to estimate aquifer parameters. The DVRFS model has 16 layers of defined thickness, a finite-difference grid consisting of 194 rows and 160 columns, and uniform cells 1,500 m on each side. Prepumping conditions (before 1913) were used as the initial conditions for the transient-state calibration. The model uses annual stress periods with discrete recharge and discharge components. Recharge occurs mostly from infiltration of precipitation and runoff on high mountain ranges and from a small amount of underflow from adjacent basins. Discharge occurs primarily through ET and spring discharge (both simulated as drains) and water withdrawal by pumping and, to a lesser amount, by underflow to adjacent basins, also simulated by drains. All parameter values estimated by the regression are reasonable and within the range of expected values. The simulated hydraulic heads of the final calibrated transient model gener

Scientific Investigations Report↗

Geology and biology of Oceanographer submarine canyon.

Santonian beds more than 100 m thick are the oldest rocks collected from the canyon. Quaternary silty clay veneers the canyon walls in many places and is commonly burrowed by benthic organisms that cause extensive erosion of the canyon walls, especially in the depth zone (100-1300 m) inhabited by the crabs Geryon and Cancer. Bioerosion is minimal on high, near-vertical cliffs of sedimentary rock, in areas of continual sediment movement, and where the sea floor is paved by gravel. A thin layer of rippled, unconsolidated silt and sand is commonly present on the canyon walls and in the axis. Shelf sediments are transported from Georges Bank over the E rim and in the Canyon by the SW drift and storm currents; tidal currents and internal waves move the sediment downcanyon along the walls and axis.- from Authors

Marine Geology↗

Sediments in Arctic sea ice: Implications for entrainment, transport and release

Despite the Arctic sea ice cover's recognized sensitivity to environmental change, the role of sediment inclusions in lowering ice albedo and affecting ice ablation is poorly understood. Sea ice sediment inclusions were studied in the central Arctic Ocean during the Arctic 91 expedition and in the Laptev Sea (East Siberian Arctic Region Expedition 1992). Results from these investigations are here combined with previous studies performed in major areas of ice ablation and the southern central Arctic Ocean. This study documents the regional distribution and composition of particle-laden ice, investigates and evaluates processes by which sediment is incorporated into the ice cover, and identifies transport paths and probable depositional centers for the released sediment. In April 1992, sea ice in the Laptev Sea was relatively clean. The sediment occasionally observed was distributed diffusely over the entire ice column, forming turbid ice. Observations indicate that frazil and anchor ice formation occurring in a large coastal polynya provide a main mechanism for sediment entrainment. In the central Arctic Ocean sediments are concentrated in layers within or at the surface of ice floes due to melting and refreezing processes. The surface sediment accumulation in central Arctic multi-year sea ice exceeds by far the amounts observed in first-year ice from the Laptev Sea in April 1992. Sea ice sediments are generally fine grained, although coarse sediments and stones up to 5 cm in diameter are observed. Component analysis indicates that quartz and clay minerals are the main terrigenous sediment particles. The biogenous components, namely shells of pelecypods and benthic foraminiferal tests, point to a shallow, benthic, marine source area. Apparently, sediment inclusions were resuspended from shelf areas before and incorporated into the sea ice by suspension freezing. Clay mineralogy of ice-rafted sediments provides information on potential source areas. A smectite maximum in sea ice sediment samples repeatedly occurred between 81°N and 83°N along the Arctic 91 transect, indicating a rather stable and narrow smectite rich ice drift stream of the Transpolar Drift. The smectite concentrations are comparable to those found in both Laptev Sea shelf sediments and anchor ice sediments, pointing to this sea as a potential source area for sea ice sediments. In the central Arctic Ocean sea ice clay mineralogy is significantly different from deep-sea clay mineral distribution patterns. The contribution of sea ice sediments to the deep sea is apparently diluted by sedimentary material provided by other transport mechanisms.

Marine Geology↗

Lithospheric signature of late Cenozoic extension in electrical resistivity structure of the Rio Grande rift, New Mexico, USA

We present electrical resistivity models of the crust and upper mantle from two‐dimensional (2‐D) inversion of magnetotelluric (MT) data collected in the Rio Grande rift, New Mexico, USA. Previous geophysical studies of the lithosphere beneath the rift identified a low‐velocity zone several hundred kilometers wide, suggesting that the upper mantle is characterized by a very broad zone of modified lithosphere. In contrast, the surface expression of the rift (e.g., high‐angle normal faults and synrift sedimentary units) is confined to a narrow region a few tens of kilometers wide about the rift axis. MT data are uniquely suited to probing the depths of the lithosphere that fill the gap between surface geology and body wave seismic tomography, namely the middle to lower crust and uppermost mantle. We model the electrical resistivity structure of the lithosphere along two east‐west trending profiles straddling the rift axis at the latitudes of 36.2 and 32.0°N. We present results from both isotropic and anisotropic 2‐D inversions of MT data along these profiles, with a strong preference for the latter in our interpretation. A key feature of the anisotropic resistivity modeling is a broad (~200‐km wide) zone of enhanced conductivity (<20 Ωm) in the middle to lower crust imaged beneath both profiles. We attribute this lower crustal conductor to the accumulation of free saline fluids and partial melt, a direct result of magmatic activity along the rift. High‐conductivity anomalies in the midcrust and upper mantle are interpreted as fault zone alteration and partial melt, respectively.

New Mexico↗

Rare earth mineral potential in the southeastern U.S. Coastal Plain from integrated geophysical, geochemical, and geological approaches

We combined geophysical, geochemical, mineralogical, and geological data to evaluate the regional presence of rare earth element (REE)−bearing minerals in heavy mineral sand deposits of the southeastern U.S. Coastal Plain. We also analyzed regional differences in these data to determine probable sedimentary provenance. Analyses of heavy mineral separates covering the region show strong correlations between thorium, monazite, and xenotime, suggesting that radiometric equivalent thorium (eTh) can be used as a geophysical proxy for those REE-bearing minerals. Airborne radiometric data collected during the National Uranium Resource Evaluation (NURE) program cover the southeastern United States with line spacing varying from ∼2 to 10 km. These data show eTh highs over Cretaceous and Tertiary Coastal Plain sediments from the Cape Fear arch in North Carolina to eastern Alabama; these highs decrease with distance from the Piedmont. Quaternary sediments along the modern coasts show weaker eTh anomalies, except near coast-parallel ridges from South Carolina to northern Florida. Prominent eTh anomalies are also observed over large riverbeds and their floodplains, even north of the Cape Fear arch where surrounding areas are relatively low. These variations were verified using ground geophysical measurements and sample analyses, indicating that radiometric methods are a useful exploration tool at varying scales. Further analyses of heavy mineral separates showed regional differences, not only in concentrations of monazite, but also of rutile and staurolite, and in magnetic susceptibility. The combined properties suggest the presence of subregions where heavy mineral sediments are primarily sourced from high-grade metamorphic, low-grade metamorphic, or igneous terrains, or where they represent a mixing of these sources. Comparisons between interpreted sources of heavy mineral sands near the Fall Line and igneous and metamorphic Piedmont and Blue Ridge units showed a strong correspondence with rocks closest to the Fall Line and poor correspondence with rocks farther inland. This strongly suggests that the primary source of those heavy minerals, especially monazite, is the rocks that formed the rocky coast that was present during opening of the Atlantic Ocean, which in turn indicates the importance of coastal processes in forming heavy mineral sand concentrations. Furthermore, narrow radiometric eTh and K anomalies are associated with major rivers, indicating limited spatial influence of fluvial processes. Later coastal plain sediment deposition appears to have involved reworking of sediments, providing an “inheritance” of the rocky coast composition that persists for some distance from the Fall Line. However, this inheritance is reduced with distance, and sediments within ∼100 km of the coast in Georgia and Florida exhibit properties indicative of mixing from multiple sources.

GSA Bulletin↗

Sedimentary response to orogenic exhumation in the northern Rocky Mountain Basin and Range province, Flint Creek basin, west-central Montana

Middle Eocene through Upper Miocene sedimentary and volcanic rocks of the Flint Creek basin in western Montana accumulated during a period of significant paleoclimatic change and extension across the northern Rocky Mountain Basin and Range province. Gravity modelling, borehole data, and geologic mapping from the Flint Creek basin indicate that subsidence was focused along an extensionally reactivated Sevier thrust fault, which accommodated up to 800 m of basin fill while relaying stress between the dextral transtensional Lewis and Clark lineament to the north and the Anaconda core complex to the south. Northwesterly paleocurrent indicators, foliated metamorphic lithics, 64 Ma (40Ar/39Ar) muscovite grains, and 76 Ma (U-Pb) zircons in a ca. 27 Ma arkosic sandstone are consistent with Oligocene exhumation and erosion of the Anaconda core complex. The core complex and volcanic and magmatic rocks in its hangingwall created an important drainage divide during the Paleogene shedding detritus to the NNW and ESE. Following a major period of Early Miocene tectonism and erosion, regional drainage networks were reorganized such that paleoflow in the Flint Creek basin flowed east into an internally drained saline lake system. Renewed tectonism during Middle to Late Miocene time reestablished a west-directed drainage that is recorded by fluvial strata within a Late Miocene paleovalley. These tectonic reorganizations and associated drainage divide explain observed discrepancies in provenance studies across the province. Regional correlation of unconformities and lithofacies mapping in the Flint Creek basin suggest that localized tectonism and relative base level fluctuations controlled lithostratigraphic architecture.

Canadian Journal of Earth Sciences↗

Predicting the spatial extent of liquefaction from geospatial and earthquake specific parameters

T he spatially extensive damage from the 2010-2011 Christchurch, New Zealand earthquake events are a reminder of the need for liquefaction hazard maps for anticipating damage from future earthquakes. Liquefaction hazard mapping as traditionally relied on detailed geologic mapping and expensive site studies. These traditional techniques are difficult to apply globally for rapid response or loss estimation. We have developed a logistic regression model to predict the probability of liquefaction occurrence in coastal sedimentary areas as a function of simple and globally available geospatial features (e.g., derived from digital elevation models) and standard earthquake-specific intensity data (e.g., peak ground acceleration). Some of the geospatial explanatory variables that we consider are taken from the hydrology community, which has a long tradition of using remotely sensed data as proxies for subsurface parameters. As a result of using high resolution, remotely-sensed, and spatially continuous data as a proxy for important subsurface parameters such as soil density and soil saturation, and by using a probabilistic modeling framework, our liquefaction model inherently includes the natural spatial variability of liquefaction occurrence and provides an estimate of spatial extent of liquefaction for a given earthquake. To provide a quantitative check on how the predicted probabilities relate to spatial extent of liquefaction, we report the frequency of observed liquefaction features within a range of predicted probabilities. The percentage of liquefaction is the areal extent of observed liquefaction within a given probability contour. The regional model and the results show that there is a strong relationship between the predicted probability and the observed percentage of liquefaction. Visual inspection of the probability contours for each event also indicates that the pattern of liquefaction is well represented by the model.

Conference Paper↗

Mineral thermometry and fluid inclusion studies of the Pea Ridge iron oxide-apatite–rare earth element deposit, Mesoproterozoic St. Francois Mountains Terrane, southeast Missouri, USA

Mineral thermometry and fluid inclusion studies were conducted on variably altered and mineralized samples from the Mesoproterozoic Pea Ridge iron oxide-apatite (IOA)-rare earth element (REE) deposit in order to constrain P-T conditions, fluid chemistry, and the source of salt and volatiles during early magnetite and later REE mineralization. Scanning electron microscopy (SEM)-cathodoluminescence and SEM-backscatter electron images show that quartz and rutile precipitated before, during, and after magnetite and REE mineral growth. Ti-in-quartz and Zr-in-rutile equilibration temperatures range from ≤350° to 750°C in the amphibole, magnetite, hematite, and silicified zones where T increased during magnetite and quartz growth and dropped precipitously after fracturing and brecciation. Late drusy quartz cements within a REE-rich breccia pipe record the lowest T (≤315°–400°C). Liquid-, vapor-rich, and hypersaline (±hematite, calcite) fluid inclusions are common and liquid CO 2 is present locally. Salinities define three populations: saline (10–27 wt % NaCl equiv), hypersaline (34–>60 wt % NaCl equiv), and dilute (0–10 wt % NaCl equiv ). The wide range of eutectic melting temperatures (−67° to −19°C) suggests that saline inclusions trapped variable proportions of a CaCl-MgCl-FeCl-bearing fluid end member and an NaCl-KCl fluid end member. Homogenization temperatures and pressures of these saline inclusions suggest they were trapped when fluids unmixed into brine and vapor at T <350°C, P <15 MPa, and a depth of ~1.5 km. Hypersaline inclusions were trapped at low T and P (~200°C and ~1 MPa) along the V + L + H curve when the system vented to the paleosurface. Data for dilute inclusions in late drusy quartz from the REE-rich breccia pipe are indicative of a boiling epithermal environment. The Na/Cl, Na/K, and Cl/Br ratios of fluid inclusion extracts provide evidence for mixtures of magmatic hydrothermal fluids and evaporated seawater. Extracts from magnetite, hematite, and pyrite plot in the magmatic-hydrothermal field, indicating that Fe was derived from a magmatic source. Their enrichments in Mg and Ca are consistent with a mafic magmatic source. The positive correlation between Na/Mg and Na/Ca ratios may be due to halite saturation or albitization of igneous rocks. Extracts from barite in the REE-rich breccia pipes are enriched in Na and Br and plot near the seawater evaporation trend. He is highly enriched relative to Ne and Ar in fluid inclusion extracts, which precludes air as a source of He. Although the He is mostly of crustal origin, pyrite with a 3 He/ 4 He (R/R A ) of 0.1 contains up to 12% mantle He. Many extracts have low 20 Ne/ 22 Ne ratios due to nucleogenic production of 22 Ne in high F/O minerals such as fluorapatite or F biotite. The arrays of data for 3 He/ 4 He (R/R A ) and 22 Ne/ 20 Ne suggest that volatiles were derived from two sources, a moderate F mafic magma containing mantle He and a high F silicic magma with crustal He. Together with other evidence cited in this report, these data (1) support a magmatic hydrothermal origin for the Mesoproterozoic magnetite-apatite deposit with ore fluids derived from a concealed mafic to intermediate-composition intrusion, (2) suggest that the REE minerals in breccia pipes were either derived from apatite or precipitated in response to decompression and cooling during breccia pipe formation, (3) provide evidence for the influx of basinal brine, magmatic fluids from granitic intrusions, and meteoric water after breccia pipe formation, and (4) show that Pea Ridge was relatively unaffected by the late Paleozoic Mississippi Valley-type (MVT) Pb-Zn system in overlying Cambrian sedimentary rocks.

Missouri↗

Significance of tourmaline-rich rocks in the North Range group of the Cuyuna iron range, east-central Minnesota

Concentrations of tourmaline in Early Proterozoic metasedimentary rocks of the Cuyuna iron range, east-central Minnesota, provide a basis for redefinition of the evolutionary history of the area. Manganiferous iron ore forms beds within the Early Proterozoic Trommald Formation, between thick-bedded granular iron-formation having shallow-water alepositional attributes and thin-bedded, nongranular iron-formation having deeper water attributes. These manganese-rich units were previously assumed to be sedimentary in origin. However, a reevaluation of drill core and mine samples from the Cuyuna North range has identified strata-bound tourmaline and tourmalinite, which has led to a rethinking of genetic models for the geology of the North range. We interpret the tourmaline-rich rocks of the area to be a product of submarine-hydrothermal solutions flowing along and beneath the sediment-seawater interface. This model for the depositional environment of the tourmaline is supported by previously reported mineral assemblages within the Trommald Formation that comprise aegirine; barium feldspar; manganese silicates, carbonates, and oxides; and Sr-rich barite veins.In many places, tourmaline-rich metasedimentary rocks and tourmalinites are associated locally with strata-bound sulfide deposits. At those localities, the tourmaline-rich strata are thought to be lateral equivalents of exhalative sulfide zones or genetically related subsea-floor replacements. On the basis of the occurrence of the tourmaline-rich rocks and tourmalinites, and on the associated minerals, we suggest that there is a previously unrecognized potential for sediment-hosted sulfide deposits in the Cuyuna North range.

Economic Geology↗

Bedrock Geology and Asbestos Deposits of the Upper Missisquoi Valley and Vicinity, Vermont

The upper Missisquoi Valley and vicinity as described in this report covers an area of about 250 square miles at the headwaters of the Missisquoi River in north-central Vermont. About 90 percent of the area is forested and the remainder is chiefly farm land. The topography reflects the geologic structure and varied resistance of the bedrock to erosion. Most of the area is on the east limb of the Green Mountain anticlinorium, which is the principal structural feature of Vermont. The bedrock is predominantly sedimentary and volcanic rock that has been regionally metamorphosed. It was intruded before metamorphism by mafic and ultramafic igneous rocks, and after metamorphism by felsic and mafic igneous rocks. The metamorphosed sedimentary and volcanic rocks range in age from Cambrian(?) to Middle Silurian, the intrusive igneous rocks from probably Late Ordovician to probably late Permian. Metamorphism and principal folding in the region occurred in Middle Devonian time. The metamorphosed sedimentary and volcanic rocks make up a section at least 25,000 feet thick and can be divided into nine formations. The Hazens Notch formation of Cambrian(?) and Early Cambrian age is characterized by carbonaceous schist. It is succeeded in western parts of the area by the Jay Peak formation of Early Cambrian age, which is chiefly a schist that is distinguished by the general absence of carbonaceous zones; in central parts of the area the Hazens Notch formation is followed by the Belvidere Mountain amphibolite, probably the youngest of the formations of Early Cambrian age. The Ottauquechee formation, composed of carbonaceous phyllite and quartzite, and phyllitic graywacke, is of Middle Cambrian age. The Stowe formation of Late Cambrian(?) and Early(?) Ordovician age overlies the Ottauquechee and is predominantly noncarbonaceous schist, though it also contains greenstone and carbonaceous schist and phyllite. The Umbrella Hill formation of Middle Ordovician age is characteristically a conglomerate in which the mineral chloritoid is common. The overlying Moretown formation, also of Middle Ordovician age, contains granulite and slate, also greenstone and amphibolite of the Coburn Hill volcanic member. The Shaw Mountain formation, made up of conglomerate, phyllite, and limestone, is the oldest Silurian unit. The Shaw Mountain formation is succeeded by the Northfield slate of Middle Silurian age. The igneous rocks of the region include various ultramafic plutonic rocks, such as dunite, peridotite, and serpentinite, probably of Late Ordovician age; sills and nearly concordant dikes of metagabbro of Late Ordovician age; biotite granite plutons or Middle or Late Devonian age, most notably on Eltey Mountain; and hypabyssallamprophyre, probably of late Permian age. Metamorphic zoning is shown by the distribution of rocks of the epidote-amphibolite facies and the greenschist facies in and near the Green Mountains, and near Coburn Hill and Eltey Mountain. Metasomatism related to regional metamorphism has produced porphyroblasts and quartz segregations in the sedimentary and volcanic rocks, and steatitization and carbonatization of serpentinite. Contact metamorphism has formed rocks of the epidote-amphibolite facies near granite plutons, and probably calc-silicate rock at the contacts of ultramafic plutons. The axial anticline of the Green Mountain anticlinorium and other anticlines and synclines to the east are the major longitudinal structural features of the area. These structures are complicated by transverse folds, particularly a syncline in the vicinity of Tillotson Peak. Early minor cross folds that are best developed in the Hazens Notch formation are believed to be genetically related to the transverse folds. The axial planes of the cross folds are folded about the axes of the later longitudinal folds of the Green Mountain anticlinorium. The longitudinal and transverse fold systems probably formed in the same episode of defor

Bulletin↗

Mineral Resources of the Antelope Wilderness Study Area, Nye County, Nevada

At the request of the U.S. Bureau of land Management, 83,100 acres of the Antelope Wilderness Study Area (NV-4)60-231/241) was studied. In this report the studied area is called the 'wilderness study area', or simply the 'study area.' No identified mineral or energy resources occur within the study area. The southern part of the area has moderate mineral resource potential for undiscovered gold and silver, and the Woodruff Formation in the southern part of the area has high resource potential for undiscovered vanadium, zinc, selenium, molybdenum, and silver (fig. 1). This assessment is based on field geochemical studies in 1984 and 1985 by the U.S. Bureau of Mines and field geochemical studies and geologic mapping by the U.S. Geological Survey in 1984 and 1985. The remainder of the study area has low resource potential for undiscovered gold, silver, lead, zinc, manganese, tin, and molybdenum. The study area also has low resource potential for undiscovered oil and gas resources. The Antelope Wilderness Study Area is about midway between Tonopah and Eureka, Nev., in the northern Hot Creek Range and southern Antelope Range of central Nevada. It is accessible by unimproved dirt roads extending 20 mi (miles) north from U.S. Highway 6 and 40 mi south from U.S. Highway 50 (fig. 2). Most of the study area consists of rugged mountainous terrain having approximately 2,600 ft (feet) of relief. The mountain range is a block tilted gently to the east and bounded on both sides by normal faults that dip steeply to moderately west and have major displacements. Most of the study area is underlain by a thick sequence of Tertiary volcanic rocks that predominantly consist of silicic ash-flow tuff, the Windous Butte Formation. Paleozoic and lower Mesozoic (see geologic time chart in appendix) marine sediments occur along the southern margin of the study area, and lower Paleozoic rocks are exposed in the northeast corner. The areas of exposed Paleozoic-Mesozoic rocks along the southern margin of the study area have moderate mineral resource potential for gold and silver in sediment-hosted, disseminated, epithermal (low-temperature) gold-silver deposits (fig. 1). These rocks consist of folded and thrust-faulted, fine-grained clastic sediments and limestone and dolomite that locally have been brecciated and hydrothermally altered. The alteration (locally, strong silicification) and geochemical associations of these rocks indicate a favorable environment for such deposits. Exploration for disseminated gold deposits in the same geologic environment is currently being conducted just south of the study area. The remainder of the study area has low resource potential for epithermal gold and silver vein deposits in the Tertiary volcanic rocks. The Cenozoic sedimentary basins adjacent to the fault-bounded mountain block have moderate potential for petroleum resources; the study area itself has low potential for petroleum resources.

Bulletin↗

Petroleum geology and resources of the middle Caspian Basin, Former Soviet Union

The Middle Caspian basin occupies a large area between the Great Caucasus foldbelt and the southern edge of the Precambrian Russian craton. The basin also includes the central part of the Caspian Sea and the South Mangyshlak subbasin east of the sea. The basin was formed on the Hercynian accreted terrane during Late Permian?Triassic through Quaternary time. Structurally, the basin consists of the fold-and-thrust zone of the northern Caucasus foothills, the foredeep and foreland slope, the Stavropol-Prikumsk uplift and East Manych trough to the north of the slope, and the South Mangyshlak subbasin and slope of the Karabogaz arch east of the Caspian Sea. All these major structures extend offshore. Four total petroleum systems (TPS) have been identified in the basin. The South Mangyshlak TPS contains more than 40 discovered fields. The principal reserves are in Lower?Middle Jurassic sandstone reservoirs in structural traps. Source rocks are poorly known, but geologic data indicate that they are in the Triassic taphrogenic sequence. Migration of oil and gas significantly postdated maturation of source rocks and was related to faulting and fracturing during middle Miocene to present time. A single assessment unit covers the entire TPS. Largest undiscovered resources of this assessment unit are expected in the largely undrilled offshore portion of the TPS, especially on the western plunge of the Mangyshlak meganticline. The Terek-Caspian TPS occupies the fold-and-thrust belt, foredeep, and adjoining foreland slope. About 50 hydrocarbon fields, primarily oil, have been discovered in the TPS. Almost all hydrocarbon reserves are in faulted structural traps related to thrusting of the foldbelt, and most traps are in frontal edges of the thrust sheets. The traps are further complicated by plastic deformation of Upper Jurassic salt and Maykop series (Oligocene? lower Miocene) shale. Principal reservoirs are fractured Upper Cretaceous carbonates and middle Miocene sandstones. Principal source rocks are organic-rich shales in the lower part of the Maykop series. Source rocks may also be present in the Eocene, Upper Jurassic, and Middle Jurassic sections, but their contribution to discovered reserves is probably small. Three assessment units are delineated in the TPS. One of them encompasses the thrust-and-fold belt of northern Caucasus foothills. This assessment unit contains most of the undiscovered oil resources. The second assessment unit occupies the foredeep and largely undeformed foreland slope. Undiscovered resources of this unit are relatively small and primarily related to stratigraphic traps. The third unit is identified in almost untested subsalt Jurassic rocks occurring at great depths and is speculative. The unit may contain significant amounts of gas under the Upper Jurassic salt seal. The Stavropol-Prikumsk TPS lies north of the Terek-Caspian TPS and extends offshore into the central Caspian Sea where geologic data are scarce. More than one hundred oil and gas fields have been found onshore. Offshore, only one well was recently drilled, and this well discovered a large oil and gas field. Almost the entire sedimentary section of the TPS is productive; however, the principal oil reserves are in Lower Cretaceous clastic reservoirs in structural traps of the Prikumsk uplift. Most original gas reserves are in Paleogene reservoirs of the Stavropol arch and these reservoirs are largely depleted. At least three source rock formations, in the Lower Triassic, Middle Jurassic, and Oligocene?lower Miocene (Maykop series), are present in the TPS. Geochemical data are inadequate to correlate oils and gases in most reservoirs with particular source rocks, and widespread mixing of hydrocarbons apparently took place. Three assessment units encompassing the onshore area of the TPS, the offshore continuation of the Prikumsk uplift, and the central Caspian area, are identified. The

Bulletin↗

Hydrology of area 59, northern Great Plains and Rocky Mountain coal provinces, Colorado and Wyoming

Hydrologic information and analysis aid in decisions to lease federally owned coal and to prepare necessary Environmental Assessments and Impact Study reports. This need has become even more critical with the enactment of Public Law 95-87, the "Surface Mining Control and Reclamation Act of 1977." This act requires an appropriate regulatory agency to issue permits, based on the review of permit-application data to assess hydrologic impacts. This report, which partially fulfills this requirement, is one in a series of nationwide coal province reports that present information thematically, through the use of a brief text and accompanying maps, graphs, charts, or other illustrations for single hydrologic topics. The report broadly characterizes the hydrology of Area 59 in north-central Colorado and southeastern Wyoming. The report area, located within the South Platte River basin, covers a 16,000-square-mile area of diverse geology, topography, and climate. This diversity results in contrasting hydrologic characteristics. The South Platte River, the major stream in the area, and most of its tributaries originate in granitic mountains and flow into and through the sedimentary rocks of the Great Plains. Altitudes range from less than 5,000 feet to more than 14,000 feet above sea level. Precipitation in the mountains may exceed 40 inches annually, much of it during the winter, and produces deep snowpacks. Snowmelt during the spring and summer produces most streamflow. Transmountain diversion of water from the streams on the western slope of the mountains also adds to the streamflow. Precipitation in the plains is as little as 10 inches annually. Streams that originate in the plains are ephemeral. Streamflow quality is best in the mountains, where dissolved-solids concentrations are generally small. Concentrations increase in the plains as streams flow through sedimentary basins, and as urbanization and irrigation increase. The quality of some mountain streams is affected by drainage from previous metalmining areas, as indicated by greater trace-element concentrations and smaller pH values. However, the large trace-element concentrations decrease rapidly downstream from the metal-mining areas. Because the climate is semiarid in most of the area, the soils are not adequately leached; therefore, flows in ephemeral streams usually have larger concentrations of dissolved solids than flows in perennial streams. Ground water is available throughout the area; yields range from less than 0.1 gallons per minute in the fractured granite aquifer in the mountains to more than 2,000 gallons per minute in the alluvial aquifer of the South Platte River valley. Major bedrock aquifers in order of decreasing age are the Laramie-Fox Hills, Arapahoe, Denver, and Dawson; these aquifers are used for municipal, domestic, and livestock supplies. Alluvial aquifers supply the high-yield irrigation wells. The best quality ground water is found at the center of the major bedrock aquifers, where dissolved-solids concentrations are less than 200 milligrams per liter. The poorest-quality water is usually found near the edges of these aquifers. Water in the coal-bearing Laramie and Denver Formations is locally affected by coal deposits, causing dissolved-solids concentrations to be relatively large. Only one coal mine is now operating in Area 59, the Coors Energy Company surface coal mine, which produced 100,000 short tons of subbituminous coal from the Upper Cretaceous Laramie Formation in 1982. Past coal-mining operations removed more than 130 million tons of coal and lignite from Area 59,99 percent of which came from underground mines. The largest coal production was in Weld and Boulder Counties, Colorado. Hydrologic problems related to surface mining are erosion, sedimentation, decline in water levels, disruption of aquifers, and degradation of water quality. Because the semiarid mine areas have very little runoff, and the major streams have large buffer and dilution capacities, the effects of mining on surface water is minimal. However, effects on ground water may be much more severe and long-lasting.

Colorado, Wyoming↗