USGS Science⌕ Search

SEARCH · USGS Science

Results for “Resources and Energy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59Linked to original sources

Monitoring the hydrologic system for potential effects of geothermal and ground-water development in the Long Valley caldera, Mono County, California, U.S.A

In the early 1980's, renewed interest in the geothermal potential of the Long Valley caldera, California, highlighted the need to balance the benefits of energy development with the established recreational activities of the area. The Long Valley Hydrologic Advisory Committee, formed in 1987, instituted a monitoring program to collect data during the early stages of resource utilization to evaluate potential effects on the hydrologic system. Early data show declines in streamflow, spring flow, and ground-water levels caused by 6 years of below-average precipitation. Springs in the Hot Creek State Fish Hatchery area discharge water that is a mixture of nonthermal and hydrothermal components. Possible sources of nonthermal water have been identified by comparing deuterium concentrations in streams and springs. The equivalent amount of undiluted thermal water discharged from the springs was calculated on the basis of boron and chloride concentrations. Quantifying the thermal and nonthermal fractions of the total flow may allow researchers to assess changes in flow volume or temperature of the springs caused by groundwater or geothermal development.

Conference Paper↗

Monitoring the hydrologic system for potential effects of geothermal and ground-water development in the Long Valley caldera, Mono County, California, U.S.A.

In the early 1980's, renewed interest in the geothermal potential of the Long Valley caldera, California, highlighted the need to balance the benefits of energy development with the established recreational activities of the area. The Long Valley Hydrologic Advisory Committee, formed in 1987, instituted a monitoring program to collect data during the early stages of resource utilization to evaluate potential effects on the hydrologic system. Early data show declines in streamflow, spring flow, and ground-water levels caused by 6 years of below-average precipitation. Springs in the Hot Creek State Fish Hatchery area discharge water that is a mixture of nonthermal and hydrothermal components. Possible sources of nonthermal water have been identified by comparing deuterium concentrations in streams and springs. The equivalent amount of undiluted thermal water discharged from the springs was calculated on the basis of boron and chloride concentrations. Quantifying the thermal and nonthermal fractions of the total flow may allow researchers to assess changes in flow volume or temperature of the springs caused by groundwater or geothermal development.

California↗

Waterpower resources of Idaho

There are 46 developed waterpower projects having a total installed generating capacity of 1,472 megawatts (1 MW equals 1,000 kilowatts) in Idaho or on the State boundary line. When sites affecting two or more States are divided equally with the adjoining State, Idaho's allotment is 44 plants with an installed capacity of 1,025 megawatts. The gross theoretical capacity of the developed sites is 1,396 megawatts and of the undeveloped sites is 9,279 megawatts or a total of 10,675 megawatts. Power was computed for gross head, 100 percent efficiency, and average discharge. Grouped by magnitude of capability, there are 781 megawatts at 122 sites with individual capabilities of 1 to 4.99 megawatts, 2,744 megawatts at 120 sites with capabilities between 5 and 19.99 megawatts, and 7,150 megawatts at 63 sites with capabilities greater than 20 megawatts. The Snake River and its tributaries drain about 87 percent of Idaho's total area and contain 94 percent of its potential waterpower. The greatest areal concentration of waterpower, except for isolated reaches of the Snake River, is in the Clearwater River basin with about 264 kilowatts of theoretical potential per square mile. The gross theoretical power of the Salmon River basin, 3,326 MW, is the greatest of all Idaho rivers including the main stem of the Snake River. The first hydroelectric plant in Idaho was placed in operation in 1881. Waterpower has played an important part in the economy of Idaho since that time, and the State is in ninth place nationally in installed capacity of waterpower plants. Privately-owned plants produce 87.5 percent of the present average annual hydroelectric energy, and publicly-owned plants produce 12.5 percent. The principal producers are Idaho Power Company, Washington Water Power Company, Utah Power and Light Company, the Bureau of Reclamation, and the Corps of Army Engineers. The waterpower resources of Idaho are being actively developed at the present time and indications are that this active development rate will continue or accelerate.

Idaho↗

Coal resources, reserves and peak coal production in the United States

In spite of its large endowment of coal resources, recent studies have indicated that United States coal production is destined to reach a maximum and begin an irreversible decline sometime during the middle of the current century. However, studies and assessments illustrating coal reserve data essential for making accurate forecasts of United States coal production have not been compiled on a national basis. As a result, there is a great deal of uncertainty in the accuracy of the production forecasts. A very large percentage of the coal mined in the United States comes from a few large-scale mines (mega-mines) in the Powder River Basin of Wyoming and Montana. Reported reserves at these mines do not account for future potential reserves or for future development of technology that may make coal classified currently as resources into reserves in the future. In order to maintain United States coal production at or near current levels for an extended period of time, existing mines will eventually have to increase their recoverable reserves and/or new large-scale mines will have to be opened elsewhere. Accordingly, in order to facilitate energy planning for the United States, this paper suggests that probabilistic assessments of the remaining coal reserves in the country would improve long range forecasts of coal production. As it is in United States coal assessment projects currently being conducted, a major priority of probabilistic assessments would be to identify the numbers and sizes of remaining large blocks of coal capable of supporting large-scale mining operations for extended periods of time and to conduct economic evaluations of those resources.

International Journal of Coal Geology↗

Mineral resources of Du Noir Addition, Washakie Wilderness area, Fremont County, Wyoming

The Du Noir Addition to the Washakie Wilderness area consists of 34,200 acres (13,840 hectares) of scenic mountainous terrain that adjoins the Teton Wilderness and Washakie Wilderness areas. The area was studied in 1973 by the U.S. Geological Survey and U.S. Bureau of Mines to evaluate its mineral, fuel, and geothermal energy potential. This evaluation is based on a search of the geologic literature, claim and production records, and fieldwork including mapping, inspection of claims and prospects, interpretation of aeromagnetic maps, and analyses of bedrock and stream-sediment samples. Flat-lying Eocene volcaniclastic rocks of the Absaroka volcanic field are exposed in about two-thirds of the Du Noir Addition. These volcanics unconformably overlie the deeply eroded, northwest-trending Du Noir anticline in which Paleozoic marine strata of Devonian through Permian age are exposed. Of lesser importance are small deposits of Eocene non-volcanic conglomerate, and basaltic intrusive and extrusive rocks of late Pliocene and possibly younger age. The results of this study indicate that the mineral, fuel, and geothermal potential of the Du Noir Addition are minimal. Low-grade copper-molybdenum mineralization occurs outside the addition, associated with intrusive rocks, but no indications of alteration or mineralization were found within the study area. Anomalous, but not economically important, concentrations of molybdenum and uranium were found in Permian and Eocene carbonaceous shales. Phosphate rock in the Phosphoria Formation occurs in beds too thin to constitute a resource. Large amounts of very pure limestone are present in the Madison Limestone, but equally pure limestone, much closer to transportation facilities, is found throughout this part of Wyoming. That part of the Du Noir anticline in the addition is too deeply eroded to be a likely reservoir of oil and gas. Present data indicates a low potential for geothermal energy in or near the addition.

Wyoming↗

Preliminary applications of Landsat images and aerial photography for determining land-use, geologic, and hydrologic characteristics, Yampa River basin, Colorado and Wyoming

Expanded energy- and recreation-related activities in the Yampa River basin, Colorado and Wyoming, have caused a rapid increase in economic development which will result in increased demand and competition for natural resources. In planning for efficient allocation of the basin 's natural resources, Landsat images and small-scale color and color-infrared photographs were used for selected geologic, hydrologic and land-use applications within the Yampa River basin. Applications of Landsat data included: (1) regional land-use classification and mapping, (2) lineament mapping, and (3) areal snow-cover mapping. Results from the Landsat investigations indicated that: (1) Landsat land-use classification maps, at a regional level, compared favorably with areal land-use patterns that were defined from available ground information, (2) lineaments were mapped in sufficient detail using recently developed techniques for interpreting aerial photographs, (3) snow cover generally could be mapped for large areas with the exception of some densely forested areas of the basin and areas having a large percentage of winter-season cloud cover. Aerial photographs were used for estimation of turbidity for eight stream locations in the basin. Spectral reflectance values obtained by digitizing photographs were compared with measured turbidity values. Results showed strong correlations (variances explained of greater than 90 percent) between spectral reflectance obtained from color photographs and measured turbidity values. (Woodard-USGS)

Water-Resources Investigations Report↗

The EOS land validation core sites: background information and current status

The EOS Land Validation Core Sites1 will provide the user community with timely ground, aircraft, and satellite data for EOS science and validation investigations. The sites, currently 24 distributed worldwide, represent a consensus among the instrument teams and validation investigators and represent a range of global biome types (see Figure 1 and Table 1; Privette et al., 1999; Justice et al., 1998). The sites typically have a history of in situ and remote observations and can expect continued monitoring and land cover research activities. In many cases, a Core Site will have a tower equipped with above-canopy instrumentation for nearcontinuous sampling of landscape radiometric, energy and CO2 flux, meteorological variables, and atmospheric aerosol and water vapor data. These will be complemented by intensive field measurement campaigns. The data collected at these sites will provide an important resource for the broader science community. These sites can also provide a foundation for a validation network supported and used by all international space agencies.

The Earth Observer↗

Submarine geothermal resources

Approximately 20% of the earth's heat loss (or 2 ?? 1012 cal/s) is released through 1% of the earth's surface area and takes the form of hydrothermal discharge from young (Pleistocene or younger) rocks adjacent to active seafloor-spreading centers and submarine volcanic areas. This amount is roughly equivalent to man's present gross energy consumption rate. A sub-seafloor geothermal reservoir, to be exploitable under future economic conditions, will have to be hot, porous, permeable, large, shallow, and near an energy-deficient, populated land mass. Furthermore, the energy must be recoverable using technology achievable at a competitive cost and numerous environmental, legal and institutional problems will have to be overcome. The highest-temperature reservoirs should be found adjacent to the zones of the seafloor extension or volcanism that are subject to high sedimentation rates. The relatively impermeable sediments reduce hydrothermal-discharge flow rates, forcing the heat to be either conducted away or released by high-temperature fluids, both of which lead to reservoir temperatures that can exceed 300??C. There is evidence that the oceanic crust is quite permeable and porous and that it was amenable to deep (3-5 km) penetration by seawater at least some time in the early stages of its evolution. Most of the heat escapes far from land, but there are notable exceptions. For example, in parts of the Gulf of California, thermal gradients in the bottom sediments exceed 1??C/m. In the coastal areas of the Gulf of California, where electricity and fresh water are at a premium, this potential resource lies in shallow water (< 200 m) and within sight of land. Other interesting areas include the Sea of Japan, the Sea of Okhotsk and the Andaman Sea along the margins of the western Pacific, the Tyrrhenian Sea west of Italy, and the southern California borderland and west flank of the Juan de Fuca Ridge off the west coast of the United States. Many questions remain to be answered about the physical and other characteristics of these systems before they can be considered a viable resource. Until several of the most promising areas are carefully defined and drilled, the problem will remain unresolved. ?? 1976.

Journal of Volcanology and Geothermal Research↗

A geospatial analysis of water-quality threats from orphan wells in principal and secondary aquifers of the United States

Throughout the history of oil and gas production in the United States, millions of wells have been drilled for exploration and energy production. Hundreds of thousands of unplugged wells are no longer actively producing and are currently under orphan status, with no responsible party obligated for plugging. Orphan wells can pose threats to water resources by providing pathways for contaminants such as hydrocarbons and brines to migrate into water-supply aquifers. In this study, we investigate the potential threats to groundwater resources posed by orphan wells at the national scale. Water-quality data is extremely sparse in relation to orphan wells nationally and may not be suitable for identifying contamination from oil and gas development. We used geospatial and statistical methods to evaluate which principal and secondary aquifer systems may be most susceptible to contamination from orphan wells. Analysis involved three sets of susceptibility factors including: 1) factors related to the number and density of orphan wells; 2) factors that can threaten well integrity and contribute to transport of contaminants; and 3) factors related to groundwater withdrawal rates and the affected populations/communities in the event of water quality disturbances. From a dataset of 117,672 documented orphan wells, 64,203 fall within a principal aquifer system, while the remainder fall within a secondary aquifer system. By assessing the combination of well integrity and hydrogeologic factors within these aquifer systems, five groupings of principal aquifers were identified, where groups ranged from aquifer systems with high numbers of orphan wells, multiple well integrity threats and high withdrawals, to aquifers with a relatively low number of orphan wells, limited well integrity threats and minimal water use. Three regions of the country emerge containing aquifers with higher susceptibility to contamination from orphan oil and gas wells. These regions include 1) The Appalachian Basin (including the Pennsylvanian Aquifer System), 2) The Gulf Coast Aquifers (including the Coastal Lowlands Aquifer system) and 3) The California Aquifers (including the California Coastal Basin Aquifer system). This work is the first multivariate geospatial investigation of orphan wells and groundwater resources on a national scale, and sheds light on which aquifers are most susceptible to groundwater contamination from orphan wells.

Science of the Total Environment↗

Surficial sediment character of the New York-New Jersey offshore continental shelf region: A GIS compilation

Broad continental shelf regions such as the New York Bight are the product of a complex geologic history and dynamic oceanographic processes, dominated by the Holocene marine transgression (>100 m sea-level rise) following the end of the last Pleistocene ice advance ~ 20,000 years ago. The area of the U.S. Exclusive Economic Zone (U.S. EEZ) territory, extending 200 nautical miles seaward from the coast, is larger than the continental U.S. and contains submerged landforms that provide a variety of natural functions and societal benefits, such as: critical habitats for fisheries, ship navigation and homeland security, and engineering activities (i.e. oil and gas platforms, pipeline and cable routes, potential wind-energy-generation sites). Some parts of the continental margins, particularly inner-continental shelf regions, also contain unconsolidated hard-mineral deposits such as sand and gravel that are regarded as potential aggregate resources to meet or augment needs not met by onshore deposits (Williams, 1992). The present distribution of surficial sediment off the northeastern United States is shaped from the deposits left by the last glaciation and reflects the cumulative effects of sediment erosion, transport, sorting, and deposition by storm and tidal processes during the Holocene rise in sea level. As a result, the sediments on the sea floor represent both an historical record of former conditions and a guide to possible future sedimentary environments. The U.S. Geological Survey (USGS) through the Coastal and Marine Geology Program, in cooperation with the University of Colorado and other partners, has compiled extant sediment character and textural data as well as other geologic information on the sea floor from all regions around the U.S. into the usSEABED data system (Reid and others, 2005; Buczkowski and others, 2006; Reid and others, 2006). The usSEABED system, which contains information on sediment grain size and lithology for more than 340,500 stations within the U.S. EEZ. has been developed and populated with data as part of the USGS Marine Aggregate Resources and Processes and the National Benthic Habitats projects in order to provide the base-line data needed to update the current maps of offshore surficial geologic character and sediment distribution. The maps are also used to characterize benthic sea floor environments important for marine ecosystems. U.S. Geological Survey, Data Series 118 (Reid and others, 2005), of the usSEABED data release series, represents the combined efforts of the USGS and several other government agencies to provide a unified resource for accessing and preserving records of U.S. east coast sea floor geologic information and sediment texture data. For this present report, we have chosen to focus on the New York-New Jersey region, an area that has been intensely studied by the USGS for many years to address many complex issues. This report illustrates the uses of the usSEABED database for GIS applications, while offering additional insight into the resources and data available from the USGS and its collaborative institutions. This report is based on data contained in U.S. Geological Survey Data Series 118 (Reid and others, 2005) and shows an assortment of example GIS products that are possible using usSEABED. All data are intended to be GIS-ready and should not require any additional cleanup, formatting, or renaming of fields in order to use the data in a Geographic Information System. This project employs the Environmental Systems Research Institute's (ESRI) ArcView™ software. Many of these maps were made as part of the ongoing USGS study to assess marine aggregate resources offshore New York and New Jersey, but these maps can serve many other purposes. The marine science community, educators, students and others are encouraged to use these data to generate GIS products for their own purposes. The objectives of the Marine Aggregate Resources and Processes project are to produce a series of new geologic maps and reports of the sea floor that will provide scientific insights into the character and geologic development of U.S. continental margins and to use these maps and information to assess the potential availability of offshore sand and gravel resources. The mapping and aggregate resource assessments are being conducted on a national scale using the usSEABED data base as described in Williams and others (2003). Potential uses for these data include: (1) defining the geological variability of the sea floor in relation to benthic habitat diversity; (2) improving our understanding of the processes that control the distribution and transport of bottom sediments and benthic habitats; (3) locating aggregate resources for beach nourishment and industrial applications; and (4) providing a detailed geospatial framework for future marine science research, monitoring, and management activities. The initial assessments are in progress for the New York Bight and Louisiana offshore areas.

New Jersey, New York↗

Fluoride, Nitrate, and Dissolved-Solids Concentrations in Ground Waters of Washington

This study provides basic data on ground-water quality throughout the State. It is intended for uses in planning and management by agencies and individuals who have responsibility for or interest in, public health and welfare. It also provides a basis for directing future studies of ground-water quality toward areas where ground-water quality problems may already exist. The information presented is a compilation of existing data from numerous sources including: the Washington Departments of Ecology and Social and Health Services, the Environmental Protection Agency, as well as many other local, county, state and federal agencies and private corporations. Only data on fluoride, nitrate, and dissolved-solids concentrations in ground water are presented, as these constituents are among those commonly used to determine the suitability of water for drinking or other purposes. They also reflect both natural and man-imposed effects on water quality and are the most readily available water-quality data for the State of Washington. The percentage of wells with fluoride, nitrate, or dissolved-solids concentrations exceeding U.S. Environmental Protection Agency Primary and Secondary Drinking Water Regulations were about 1, about 3, and about 3, respectively. Most high concentrations occurred in widely separated wells. Two exceptions were: high concentrations of nitrate and dissolved solids in wells on the Hanford Department of Energy Facility and high concentrations of nitrate in the lower Yakima River basin. (USGS)

Water-Resources Investigations Report↗

Remote sensing sensors and applications in environmental resources mapping and modeling

The history of remote sensing and development of different sensors for environmental and natural resources mapping and data acquisition is reviewed and reported. Application examples in urban studies, hydrological modeling such as land-cover and floodplain mapping, fractional vegetation cover and impervious surface area mapping, surface energy flux and micro-topography correlation studies is discussed. The review also discusses the use of remotely sensed-based rainfall and potential evapotranspiration for estimating crop water requirement satisfaction index and hence provides early warning information for growers. The review is not an exhaustive application of the remote sensing techniques rather a summary of some important applications in environmental studies and modeling.

Sensors↗

U.S. Geological Survey Assessment 2000: Estimates of undiscovered oil and gas resources for the world

Worldwide supply of oil and natural gas is ultimately linked to the geologic abundance and distribution of those fossil fuels. The U.S. Geological Survey (USGS) has completed a new assessment of the technically recoverable undiscovered oil and gas resources of the world. Nearly 1000 provinces were defined and known petroleum resources exist in 406 of these. A total of 76 priority provinces, containing over 95 percent of the world's known oil and gas, and 52 'boutique', or prospective, provinces were assessed. Based upon our initial analyses, several observations are clear. First, our estimates of total undiscovered technically recoverable petroleum (oil, natural gas, natural gas liquids) resources do not differ greatly (+9.5 percent) from the world totals determined in the 1994 USGS world assessment. However, our estimates of undiscovered oil are up considerably (+24.3 percent), and the regional distribution differs significantly from previous estimates. Secondly, estimates of global undiscovered natural gas resources are smaller than previously estimated (-10.4 percent), largely due to reduced estimates for the former Soviet Union, and natural gas liquids resources are significantly larger than previous estimates because co-product ratio calculations were included in this assessment. In addition, mean estimates of field growth of known oil and gas fields will likely approximate quantities of undiscovered resources and are a critical component of any analysis of world oil and gas supply.

Minerals and Energy - Raw Materials Report↗

Geologic map of the Timberville quadrangle, Virginia

This map of the Timberville 7.5-minute quadrangle in Rockingham and Shenandoah counties, Virginia shows the distribution of Paleozoic-age sedimentary rocks in map and cross-section. Surficial deposits including alluvium and colluvium are also shown. The characteristics of each map unit are described and a brief report discusses the stratigraphy, structure and mineral resources of the area.

Virginia↗

A characterization of the deep-sea coral and sponge community along the Oregon Coast using a remotely operated vehicle on the EXPRESS 2022 expedition

Deep-sea coral and sponge (DSCS) communities serve as essential fish habitat (EFH) by providing shelter and nursery habitat, increasing diversity, and increasing prey availability (Freese and Wing, 2003; Bright, 2007; Baillon et al., 2012; Henderson et al., 2020). Off the U.S. West Coast, threats to these long-lived, fragile organisms from bottom contact fishing gear, potential offshore renewable energy development, and ocean warming and acidification have been the subject of recent research (Gomez et al., 2018; Salgado et al., 2018; Yoklavich, et al., 2018; Gugliotti et al., 2019). Other DSCS studies have reported new species (Yoklavich and Love, 2005), analyzed species distribution and abundance (Tissot et al., 2006, Watters et al., 2022), developed predictive distribution models (Huff et al., 2013; Rooper et al., 2017; Kreidler, 2020), and discovered medicinal uses for corals and sponges (Essack et al., 2011; Shrestha et al., 2018). Due to the vast area of unexplored seafloor within the territorial waters and the U.S. exclusive economic zone (EEZ; 12-200 nautical miles off the coast) and the technological requirements and expense of deep-sea research, there is still much to learn about the distributions and biology of DSCS. This information is critical to resource managers for effective conservation and management of DSCS habitats. In order to minimize the adverse impacts of fishing on EFH, the Pacific Fishery Management Council (PFMC) and National Marine Fisheries Service (NMFS) designated several seafloor habitat areas as EFH conservation areas (EFHCA), first in 2006 (as part of Amendment 19 to the Pacific coast groundfish fishery management plan) and then again in 2020 (as part of Amendment 28). These areas are closed to bottom trawl fishing at a minimum, and in some cases to all bottom contact fishing gears. In addition to protections afforded by EFH-related regulations, the National Marine Sanctuary Program prohibits certain non-fishing activities within areas designated as national marine sanctuaries, such as oil and gas exploration or extraction, cable laying, and other forms of seabed alteration or construction that disturb benthic communities. NOAA’s Deep-Sea Coral and Research Technology Program (DSCRTP) began a 4-yr funding initiative for the U.S. West Coast in 2017. The goals of the West Coast Deep-Sea Coral Initiative (WCDSCI) were to: 1) gather baseline information on areas subject to fishing regulation changes prior to the implementation of Amendment 28; 2) improve our understanding of known DSCS bycatch “hot spots”; and 3) explore and assess DSCS resources within NOAA National Marine Sanctuaries with emphasis on areas of sanctuary resource protection and management concerns. As part of the WCDSCU, an 11-day expedition (3 Sep – 13 Sep 2022) was launched from the NOAA Ship Bell M. Shimada, beginning and ending in Newport, OR. The science team assembled for this cruise were members of the EXpanding Pacific Research and Exploration of Submerged Systems (EXPRESS) campaign, which brings together researchers from federal and nonfederal institutions to collaborate on scientific expeditions targeting the deepwater areas off California, Oregon, and Washington. EXPRESS supports researchers leveraging funding, resources, personnel, and expertise to accomplish more science than would have been possible by a single entity alone. The 2022 expedition included research partners from National Marine Fisheries Service (NMFS) Southwest Fisheries Science Center (SWFSC) and Northwest Fisheries Science Center (NWFSC), Bureau of Ocean Energy Management (BOEM), U.S. Geological Survey (USGS), Pacific Fisheries Management Council Habitat Committee, and Woods Hole Oceanographic Institution.

Report↗

Assessment of coal mine methane (CMM) and abandoned mine methane (AMM) resource potential of longwall mine panels: example from Northern Appalachian Basin, USA

"Coal mine methane (CMM) and abandoned mine methane (AMM), are by-products of underground coal mining. The quantity and the emission rate of CMM and AMM may vary depending on the type of mine, gas content of the mined coal seam, and gas sourced from strata and coal beds in overlying and underlying formations affected by mining. Therefore, if a mine has the potential of accumulating gas after being abandoned and sealed properly, methane may be produced and used as an energy source to serve to local communities around the mine. Producing AMM also prevents methane, which is a potent greenhouse gas, from leaking to the atmosphere through seals, shaft plugs or surface cracks. One of the technical barriers in front of investments to economical utilization of CMM and AMM is the difficulty to predict how much methane may be available in the gas emission zone (GEZ) as a resource during mining, and after the panels are sealed and the mine is abandoned. Another difficulty is to estimate how much of the potential methane resource can be produced, and its production feasibility with boreholes, such as gob gas ventholes (GGV) converted to capture AMM. In this study, a comparative assessment is presented to address the issues stated above. The assessment was conducted on two adjacent panels of a longwall mine that operated until 2016 in the Pennsylvania section of the Northern Appalachian Basin. The study is based on two approaches that might be used depending on the availability of data, extensive or minimal. The first approach uses an extensive geological data set, geostatistics, and measured shaft gas emission and GGV production values that were collected while the panel(s) were active to assess the AMM resource. The second approach uses a minimal amount of geologic data and its uncertainty as probabilistic distributions as well as predicted during-mining emissions using a publicly available software. Results showed that both approaches provide relatively comparable estimates of AMM resources and AMM recovery potential using wellbores. The differences in assessed quantities are mostly due to the characteristics of the two methods. In that regard, this paper can be considered as guidance to choose the assessment approach based on data availability. "

Northern Appalachian Basin↗