USGS Science⌕ Search

SEARCH · USGS Science

Results for “One Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59Linked to original sources
USGS2015

Critical metals in manganese nodules from the Cook Islands EEZ, abundances and distributions

The Cook Islands (CIs) Exclusive Economic Zone (EEZ) encompasses 1,977,000 km 2 and includes the Penrhyn and Samoa basins abyssal plains where manganese nodules flourish due to the availability of prolific nucleus material, slow sedimentation rates, and strong bottom currents. A group of CIs nodules was analyzed for mineralogical and chemical composition, which include many critical metals not before analyzed for CIs nodules. These nodules have varying sizes and nuclei material; however all are composed predominantly of δ-MnO 2 and X-ray amorphous iron oxyhydroxide. The mineralogy, Fe/Mn ratios, rare earth element contents, and slow growth rates (mean 1.9 mm/10 6 years) reflect formation primarily by hydrogenetic precipitation. The paucity of diagenetic input can be explained by low primary productivity at the surface and resultant low organic matter content in seafloor sediment, producing oxic seafloor and sub-seafloor environments. The nodules contain high mean contents of Co (0.41%), Ni (0.38%), Ti (1.20%), and total rare earth elements plus yttrium (REY; 0.167%), and also high contents of Mo, Nb, V, W, and Zr. Compiled data from a series of four cruises by the Japan International Cooperation Agency and the Mining agency of Japan from 1985 to 2000 were used to generate a map that defines the statistical distribution of nodule abundance throughout the EEZ, except the Manihiki Plateau. The abundance distribution map shows a belt of high nodule abundance (19–45 kg/m 2 ) that starts in the southeast corner of the EEZ, runs northwest, and also bifurcates into a SW trending branch. Small, isolated areas contain abundances of nodules of up to 58 kg/m 2 . Six ~ 20,000 km 2 areas of particularly high abundance were chosen to represent potential exploration areas, and maps for metal concentration were generated to visualize metal distribution and to extrapolate estimated metal tonnages within the six sites and the EEZ as a whole. Grades for Mn, Cu, and Ni are low in CIs nodules in areas of high abundance; however, Ti, Co, and REY show high contents where nodule abundances are high. Of the six areas identified to represent a range of metal contents, one at the northern end of the N-S abundance main belt optimizes the most metals and would yield the highest dry metric tons for Mn (61,002,292), Ni (1,247,834), Mo (186,166), V (356,247), W (30,215), and Zr (195,323). When compared with the Clarion–Clipperton Zone, the CIs nodules show higher nodule abundances (> 25 kg/m 2 over ~ 123,844 km 2 ), and are more enriched in the green-tech, high-tech, and energy metals Co, Ti, Te, Nb, REY, Pt, and Zr. The CIs EEZ shows a significant resource potential for these critical metals due to their high prices, high demand, and the high nodule abundance, which will allow for a smaller footprint for a 20-year mine site and therefore smaller environmental impact.

Ore Geology Reviews↗
USGS2019

Detrital K-feldspar Pb isotopic evaluation of extraregional sediment transported through an Eocene tectonic breach of southern California's Cretaceous batholith

Sedimentary provenance studies have come to be overwhelmingly based upon U–Pb geochronologic measurements performed with detrital zircon while alternative and potentially complementary approaches such as conglomerate clast studies and heavy mineral analysis have faded in importance. Measurement of Pb isotopic compositions in detrital K-feldspar is among the under-utilized approaches available to ascertain sedimentary source regions. While it has been long recognized that common Pb isotope compositions recorded by K-feldspar vary widely and reflect the crustal provinces from which the host basement rocks crystallized, use of the approach has suffered due to a lack of appropriate statistical models and ground truth compositional data from source regions. In this paper, we: (1) present high-throughput LA-ICPMS analysis protocols needed to generate statistically meaningful detrital K-feldspar Pb isotope data sets; (2) develop an interpretative approach based upon 208 Pb/ 206 Pb vs. 207 Pb/ 206 Pb that incorporate information from the U- and Th-decay systems into one two-dimensional plot that is amenable to analysis using two-dimensional Kolmogorov–Smirnoff statistical tests; (3) generate new Pb isotopic data from basement rocks from southwestern North America to improve knowledge of the Pb isotopic properties of potential source regions; and (4) generate new Pb isotopic data from Lower Eocene to Lower Miocene sedimentary rocks to evaluate changes in drainage patterns that occurred in response to deformation that affected the southern California margin. Through this case study, we demonstrate how our new analytical and interpretative methods could be profitably applied to future geochemical and provenance studies and tectonically driven re-organization of drainage patterns.

Earth and Planetary Science Letters↗
USGS2024

Transdisciplinary research supports the sustainability of barrier island systems threatened by climate change

The management of developed barrier islands is often piece-meal and reactionary despite the complex, dynamic nature of these systems, and sustainable practices will become increasingly difficult due to heightened pressures of climate change. Adaptation actions, including nature-based solutions, need to be thoroughly evaluated prior to implementation to understand system-wide impacts and avoid maladaptation. Anarde et al. (2024a), ( https://doi.org/10.1029/2023ef003672 ), Anarde et al. (2024b), ( https://doi.org/10.1029/2023ef004200 ) is the latest important contribution in a growing body of transdisciplinary research that more robustly evaluates the complex physical process-and-response relationship of barrier systems via sophisticated numerical modeling approaches that also interface with socioeconomic models to inform coastal management actions in response to mitigating coastal risk. This new research indicates the importance of coordinated system-scale barrier island management, as strategies to reduce coastal hazard risk in one location will directly affect adjacent communities. Further, this work demonstrates that reducing barrier management interventions may actually promote barrier recovery and sustainability in the face of sea level rise. In addition, recent advances in the analysis and application of remotely sensed data from satellites and oblique aerial photography provide scientists an unprecedented opportunity to track coastal evolution over a wide range of spatial and temporal scales at minimal cost. As sea level rise and changing storm patterns challenge the sustainable management of barrier island systems, integrating these advanced, transdisciplinary tools will enable scientists and coastal practitioners to more thoroughly evaluate coastal adaptation options, efficiently invest limited resources to mitigate coastal hazard risk for communities, support healthy ecosystems, and reduce system-wide impacts.

Earth's Future↗
USGS2011

Hydrologic effects of urbanization and climate change on the Flint River Basin, Georgia

The potential effects of long-term urbanization and climate change on the freshwater resources of the Flint River basin were examined by using the Precipitation-Runoff Modeling System (PRMS). PRMS is a deterministic, distributed-parameter watershed model developed to evaluate the effects of various combinations of precipitation, temperature, and land cover on streamflow and multiple intermediate hydrologic states. Precipitation and temperature output from five general circulation models (GCMs) using one current and three future climate-change scenarios were statistically downscaled for input into PRMS. Projections of urbanization through 2050 derived for the Flint River basin by the Forecasting Scenarios of Future Land-Cover (FORE-SCE) land-cover change model were also used as input to PRMS. Comparison of the central tendency of streamflow simulated based on the three climate-change scenarios showed a slight decrease in overall streamflow relative to simulations under current conditions, mostly caused by decreases in the surface- runoff and groundwater components. The addition of information about forecasted urbanization of land surfaces to the hydrologic simulation mitigated the decreases in streamflow, mainly by increasing surface runoff.

Georgia↗
USGS2003

Preliminary northeast Asia geodynamics map

This map portrays the geodynamics of Northeast Asia at a scale of 1:5,000,000 using the concepts of plate tectonics and analysis of terranes and overlap assemblages. The map is the result of a detailed compilation and synthesis at 5 million scale and is part of a major international collaborative study of the Mineral Resources, Metallogenesis, and Tectonics of Northeast Asia conducted from 1997 through 2002 by geologists from earth science agencies and universities in Russia, Mongolia, Northeastern China, South Korea, Japan, and the USA. This map is the result of extensive geologic mapping and associated tectonic studies in Northeast Asia in the last few decades and is the first collaborative compilation of the geology of the region at a scale of 1:5,000,000 by geologists from Russia, Mongolia, Northeastern China, South Korea, Japan, and the USA. The map was compiled by a large group of international geologists using the below concepts and definitions during collaborative workshops over a six-year period. The map is a major new compilation and re-interpretation of pre-existing geologic maps of the region. The map is designed to be used for several purposes, including regional tectonic analyses, mineral resource and metallogenic analysis, petroleum resource analysis, neotectonic analysis, and analysis of seismic hazards and volcanic hazards. The map consists of two sheets. Sheet 1 displays the map at a scale of 1:5,000,000, explanation. Sheet 2 displays the introduction, list of map units, and source references. Detailed descriptions of map units and stratigraphic columns are being published separately. This map is one of a series of publications on the mineral resources, metallogenesis, and geodynamics,of Northeast Asia. Companion studies and other articles and maps , and various detailed reports are: (1) a compilation of major mineral deposit models (Rodionov and Nokleberg, 2000; Rodionov and others, 2000; Obolenskiy and others, in press a); (2) a series of metallogenic belt maps (Obolenskiy and others, 2001; in press b); (3) a lode mineral deposits and placer districts location map for Northeast Asia (Ariunbileg and others, in press b); (4) descriptions of metallogenic belts (Rodionov and others, in press); and (5) a database on significant metalliferous and selected nonmetalliferous lode deposits, and selected placer districts (Ariunbileg and others, in press a).

Open-File Report↗
USGS2012

A unifying model for planform straightness of ripples and dunes in air and water

Geologists, physicists, and mathematicians have studied ripples and dunes for more than a century, but despite considerable effort, no general model has been proposed to explain perhaps the most fundamental property of their morphology: why are some bedforms straight, continuous, parallel, and uniform in planform geometry (i.e. two-dimensional) whereas others are irregular (three-dimensional)? Here we argue that physical coupling along the crest of a bedform is required to produce straight crests and that along-crest flow and sand transport provide effective physical mechanisms for that coupling. Ripples and dunes with the straightest and most continuous crests include longitudinal and oblique dunes in unidirectional flows, wave ripples, dunes in reversing flows, wind ripples, and ripples migrating along a slope. At first glance, these bedforms appear quite different (ripples and dunes; air and water; transverse, oblique, and longitudinal orientations relative to the net sand-transport direction), but they all have one property in common: a process that increases the amount of along-crest sand transport (that lengthens and straightens their crests) relative to the across-crest transport (that makes them migrate and take the more typical and more three-dimensional planform geometry). In unidirectional flows that produce straight bedforms, along-crest transport of sand is caused by along-crest flow (non-transverse bedform orientation), gravitational transport along an inclined crest, or ballistic splash in air. Bedforms in reversing flows tend to be straighter than their unidirectional counterparts, because reverse transport across the bedform crest reduces the net across-crest transport (that causes the more typical irregular geometry) relative to the along-crest transport (that smoothes and straightens planform geometry).

Earth-Science Reviews↗
USGS2010

The North American upper mantle: Density, composition, and evolution

The upper mantle of North America has been well studied using various seismic methods. Here we investigate the density structure of the North American (NA) upper mantle based on the integrative use of the gravity field and seismic data. The basis of our study is the removal of the gravitational effect of the crust to determine the mantle gravity anomalies. The effect of the crust is removed in three steps by subtracting the gravitational contributions of (1) topography and bathymetry, (2) low-density sedimentary accumulations, and (3) the three-dimensional density structure of the crystalline crust as determined by seismic observations. Information regarding sedimentary accumulations, including thickness and density, are taken from published maps and summaries of borehole measurements of densities; the seismic structure of the crust is based on a recent compilation, with layer densities estimated from P-wave velocities. The resultant mantle gravity anomaly map shows a pronounced negative anomaly (−50 to −400 mGal) beneath western North America and the adjacent oceanic region and positive anomalies (+50 to +350 mGal) east of the NA Cordillera. This pattern reflects the well-known division of North America into the stable eastern region and the tectonically active western region. The close correlation of large-scale features of the mantle anomaly map with those of the topographic map indicates that a significant amount of the topographic uplift in western NA is due to buoyancy in the hot upper mantle, a conclusion supported by previous investigations. To separate the contributions of mantle temperature anomalies from mantle compositional anomalies, we apply an additional correction to the mantle anomaly map for the thermal structure of the uppermost mantle. The thermal model is based on the conversion of seismic shear-wave velocities to temperature and is consistent with mantle temperatures that are independently estimated from heat flow and heat production data. The thermally corrected mantle density map reveals density anomalies that are chiefly due to compositional variations. These compositional density anomalies cause gravitational anomalies that reach ~250 mGal. A pronounced negative anomaly (−50 to −200 mGal) is found over the Canadian shield, which is consistent with chemical depletion and a corresponding low density of the lithospheric mantle, also referred to as the mantle tectosphere. The strongest positive anomaly is coincident with the Gulf of Mexico and indicates a positive density anomaly in the upper mantle, possibly an eclogite layer that has caused subsidence in the Gulf. Two linear positive anomalies are also seen south of 40°N: one with a NE-SW trend in the eastern United States, roughly coincident with the Grenville-Appalachians, and a second with a NW-SE trend beneath the states of Texas, New Mexico, and Colorado. These anomalies are interpreted as being due to (1) the presence of remnants of an oceanic slab in the upper mantle beneath the Grenville-Appalachian suture and (2) mantle thickening caused by a period of shallow, flat subduction during the Laramie orogeny, respectively. Based on these geophysical results, the evolution of the NA upper mantle is depicted in a series of maps and cartoons that display the primary processes that have formed and modified the NA crust and lithospheric upper mantle.

Journal of Geophysical Research B: Solid Earth↗
USGS2000

Finding your way with map and compass

A topographic map tells you where things are and how to get to them, whether you're hiking, biking, hunting, fishing, or just interested in the world around you. These maps describe the shape of the land. They define and locate natural and manmade features like woodlands, waterways, important buildings, and bridges. They show the distance between any two places, and they also show the direction from one point to another. Distances and directions take a bit of figuring, but the topography and features of the land are easy to determine. The topography is shown by contours. These are imaginary lines that follow the ground surface at a constant elevation; they are usually printed in brown, in two thicknesses. The heavier lines are called index contours, and they are usually marked with numbers that give the height in feet or meters. The contour interval, a set difference in elevation between the brown lines, varies from map to map; its value is given in the margin of each map. Contour lines that are close together represent steep slopes. Natural and manmade features are represented by colored areas and by a set of standard symbols on all U.S . Geological Survey (USGS) topographic maps. Woodlands, for instance, are shown in a green tint; waterways, in blue. Buildings may be shown on the map as black squares or outlines. Recent changes in an area may be shown by a purple overprint. A road may be printed in red or black solid or dashed lines, depending on its size and surface. A list of symbols is available from the Earth Science Information Center (ESIC).

Fact Sheet↗
USGS2003

Oceans on Mars: An assessment of the observational evidence and possible fate

If the large Late Hesperian outflow channels were eroded by extensive floods, as appears likely, then large bodies of water must have once occupied the northern plains during that period. Previous estimates of the sizes of bodies of water in the northern lowlands range up to 3 ?? 108 km3. Several contacts have been previously mapped around the edges of the northern plains and interpreted to be shorelines remaining from these former standing bodies of water. We examine the elevations and geologic relations along these contacts in detail and find little support for their interpretation as shorelines. Some contacts are clearly of volcanic origin, and all have significant variations in elevation. Better support for the former presence of water over large parts of the northern plains is provided by the Vastitas Borealis Formation (VBF). Most of the post-Noachian fill within the northern basin is ridged plains of Lower Hesperian age, interpreted to be volcanic in origin. Overlying the ridged plains is the VBF, a thin veneer of material of Upper Hesperian age. The VBF may have been deposited from large floods. Support for this interpretation is the similarity in age between the outflow channels and the VBF, the presence of the VBF at the lower ends of the outflow channels, and identification of numerous features in the outcrop areas of the VBF that are suggestive of basal melting of an ice sheet. To cover all the area over which the VBF is exposed would require ???2.3 ?? 107 km3 of water. Spread over the entire surface of Mars, this volume is equal to a global layer (global equivalent layer, or GEL) ???156 m deep. We find no support for the larger estimates of ocean volumes that range up to 3 ?? 108 km3 and which imply comparable amounts of water per unit area as are currently present on the surface of the Earth. Under present climatic conditions on Mars an ocean would freeze in a geologically short time period (???104 years), then would sublimate away at rates strongly dependent on the presence or absence of debris on the ice surface. The present VBF is interpreted as a sublimation residue from the ponded outflow channel effluents. The fate of a volume of water thought to have been emplaced by the outflow channels (???2.3 ?? 107 km3) is largely accounted for by the presence of other existing reservoirs on the planet. An approximately 20-30 m GEL of water is estimated to be in the present polar caps, and a 50 m GEL may have escaped to space since the Hesperian, leaving ???80 m GEL unaccounted for. This amount may be partly trapped in other volatile-rich deposits on the surface, and a significant amount could have reentered the groundwater system by south polar basal melting and been progressively cold-trapped at the base of a growing cryosphere. On the basis of our assessment of the Hesperian-aged deposits, we predict that testing of the Clifford and Parker [2001] hypothesis that a Noachian-aged ocean covered up to one third of the surface of Mars will be made very difficult by the enhanced degradation rates in the Noachian and subsequent geological events in the northern lowlands.

Journal of Geophysical Research E: Planets↗
USGS2009

Simulating and understanding sand wave variation: A case study of the Golden Gate sand waves

In this paper we present a detailed comparison between measured features of the Golden Gate sand wave field and the results of a nonlinear sand wave model. Because the Golden Gate sand waves exhibit large variation in their characteristics and in their environmental physics, this area gives us the opportunity to study sand wave variation between locations, within one well-measured, large area. The nonlinear model used in this paper is presently the only tool that provides information on the nonlinear evolution of large-amplitude sand waves. The model is used to increase our understanding of the coupling between the variability in environmental conditions and the sand wave characteristics. Results show that the model is able to describe the variation in the Golden Gate sand waves well when both the local oscillating tidal current and the residual current are taken into account. Current and water depth seem to be the most important factors influencing sand wave characteristics. The simulation results give further confidence in the underlying model hypothesis and assumptions. Copyright 2009 by the American Geophysical Union.

Journal of Geophysical Research F: Earth Surface↗
USGS2010

Estimating the timing and location of shallow rainfall-induced landslides using a model for transient, unsaturated infiltration

Shallow rainfall-induced landslides commonly occur under conditions of transient infiltration into initially unsaturated soils. In an effort to predict the timing and location of such landslides, we developed a model of the infiltration process using a two-layer system that consists of an unsaturated zone above a saturated zone and implemented this model in a geographic information system (GIS) framework. The model links analytical solutions for transient, unsaturated, vertical infiltration above the water table to pressure-diffusion solutions for pressure changes below the water table. The solutions are coupled through a transient water table that rises as water accumulates at the base of the unsaturated zone. This scheme, though limited to simplified soil-water characteristics and moist initial conditions, greatly improves computational efficiency over numerical models in spatially distributed modeling applications. Pore pressures computed by these coupled models are subsequently used in one-dimensional slope-stability computations to estimate the timing and locations of slope failures. Applied over a digital landscape near Seattle, Washington, for an hourly rainfall history known to trigger shallow landslides, the model computes a factor of safety for each grid cell at any time during a rainstorm. The unsaturated layer attenuates and delays the rainfall-induced pore-pressure response of the model at depth, consistent with observations at an instrumented hillside near Edmonds, Washington. This attenuation results in realistic estimates of timing for the onset of slope instability (7 h earlier than observed landslides, on average). By considering the spatial distribution of physical properties, the model predicts the primary source areas of landslides.

Journal of Geophysical Research F: Earth Surface↗
USGS2019

Downstream‐propagating channel responses to decadal‐scale climate variability in a glaciated river basin

Regional climate is an important control on the rate of coarse sediment mobilization and transport in alpine river systems. Changes in climate are then expected to cause a cascade of geomorphic responses, including adjustments in downstream channel morphology. However, the mechanics and sensitivity of channel response to short‐term climate variability remain poorly documented. In the Nooksack River, which drains a glaciated stratovolcano in Washington State, bed elevation changes were inferred from shifting stage–discharge relations at seven USGS stream gages. Decadal‐scale elevation trends at most sites can be explained as a downstream‐propagating channel response to regional climate variability, where periods of persistent warm, dry [cool, wet] conditions corresponded to periods of aggradation [incision]. The channel elevation response propagated downstream at a rate of one to four kilometers per year; propagation rate scaled closely with channel slope. Historical trends in glacier extent and flood intensity both show some potential to explain climate–sediment linkages, though assessing causation is complicated by the shared climate signal in both records. Results show the influence of the Pacific Decadal Oscillation, with relatively high coarse sediment yields prior to 1950 and since 1980, and notably lower sediment yields from 1950 to 1980. Measured sediment yields from nearby glaciated basins corroborate this history, suggesting a regional coherence to these climate–sediment linkages. These results document consistent relations between climate, sediment supply and downstream channel response at the basin‐scale, with channel responses propagating downstream over periods of decades with little apparent attenuation.

Washington↗
USGS2013

U.S. Geological Survey environmental health science strategy — Providing environmental health science for a changing world

Executive Summary America has an abundance of natural resources. We have bountiful clean water, fertile soil, and unrivaled national parks, wildlife refuges, and public lands. These resources enrich our lives and preserve our health and wellbeing. These resources have been maintained because of our history of respect for their value and an enduring commitment to their vigilant protection. Awareness of the social, economic, and personal value of the health of our environment is increasing. The emergence of environmentally driven diseases caused by exposure to contaminants and pathogens is a growing concern worldwide. New health threats and patterns of established threats are affected by both natural and anthropogenic changes to the environment. Human activities are key drivers of emerging (new and re-emerging) health threats. Societal demands for land and natural resources, quality of life, and economic prosperity lead to environmental change. Natural earth processes, climate trends, and related climatic events will compound the environmental impact of human activities. These environmental drivers will influence exposure to disease agents, including viral, bacterial, prion, and fungal pathogens, parasites, synthetic chemicals and substances, natural earth materials, toxins, and other biogenic compounds. The U.S. Geological Survey (USGS) defines environmental health science broadly as the interdisciplinary study of relations among the quality of the physical environment, the health of the living environment, and human health. The interactions among these three spheres are driven by human activities, ecological processes, and natural earth processes; the interactions affect exposure to contaminants and pathogens and the severity of environmentally driven diseases in animals and people. This definition provides USGS with a framework for synthesizing natural science information from across the Bureau and providing it to environmental, natural resource, agricultural, and public health managers. USGS specializes in science at the environment-health interface, by characterizing the processes that affect the interaction among the physical environment, the living environment, and people, and the resulting factors that affect ecological and human exposure to disease agents. The USGS is a Federal science agency with a broad range of natural science expertise relevant to environmental health. USGS provides scientific information and tools as a scientific basis for management and policy decisionmaking. This report describes a 10-year strategy that encompasses the portfolio of USGS environmental health science. It summarizes national environmental health priorities that USGS is best suited to address, and will serve as a strategic framework for USGS environmental health science goals, actions, and outcomes for the next decade. Implementation of this strategy is intended to aid coordination of USGS environmental health activities and to provide a focal point for disseminating information to stakeholders. The “One Health” paradigm advocated by the World Health Organization (WHO; World Health Organization, 2011), and the American Veterinary Medical Association (AVMA; American Veterinary Medical Association, 2008), among others, is based on a general recognition that the health of humans, animals, and the environment are inextricably linked. Thus, successful efforts to protect that health will require increased interdisciplinary research and increased communication and collaboration among the broader scientific and health community. This strategy is built upon that paradigm.

Circular↗
USGS2021

Approach for quantifying rare Earth elements at low keV

The challenges of analyzing bastnaesite (REECO3F) and hydroxylbastnaesite (REECO3OH) include beam sensitivity, quantification of light elements in a heavy element matrix, the presence of elements that cannot be analyzed with EPMA (H), and the use of x-ray lines whose physical constants are not well known. To overcome some of these challenges, Ca, La, Ce, Pr, Nd, and Sm were analyzed at 15 keV accelerating voltage and the light elements (C, O, F) were analyzed at 7 keV accelerating voltage. This approach is ideal for samples that are homogeneous within the volume analyzed. However, for the bastnaesite of interest, this solution is unsatisfactory as backscattered electron imaging reveals chemical variations at scales of less than 1 m (fig. 1). Monte Carlo simulations and wavescans of the REE M family of x-rays were evaluated to determine the best analytical approach. Monte Carlo simulations using Casino v2.42 were ran on a substrate of CeCO3F with a density of 5.00 g/cm3 at 15 keV and 7 kCV accelerating voltage. Depth distribution curves, φ(ρz), reveal x-ray generation at 15 keV for the Ce L shell x-rays approaches 1.0 m whereas the depth of Ce M shell x-ray generation at 7 keV is less than 0.4 m. Similarly, the K shell x-ray generation depth for C, O, and F at 7 keV is also less than 0.4 m. These simulations demonstrate an accelerating voltage of 7 keV or less and use of the REE M x-rays is necessary to acquire chemical information from the same volume of material for the light and heavy elements. Bastnaesite contains all REE and therefore one must consider the energy of the highest x-ray line of interest, namely the Lu M at 1.83 kV, to achieve an overvoltage (Eo/Ec) of over 2. Bastnaesite is also an insulator and requires a conductive coating, therefore 7 keV was used to avoid contributions of the coating material to the analysis given the above constraints. The USNM REE phosphate standards, Edinburgh REE glasses, CeO2, LaB6, and the metals of Sm, Dy, Gd, Er, and Yb were selected to evaluate the peak overlaps of the M family x-ray lines. The materials were coated with ~ 5nm iridium with a Leica ACE600 prior to analysis. Full spectrometer wavescans were collected at 7 keV accelerating voltage, 50 nA beam current, and 20 um beam diameter on a JEOL 8530F Plus using TAP and TAPL crystals. The step size was 0.109 mm along the length of the spectrometer with a dwell of 3 seconds at each step. M and M lines are broad and not individually resolved for the light REE but become more separated and sharper with increasing atomic number. M and M lines for each REE are also present across the spectrometer range further complicating peak interference corrections. The peak positions and overall shape for the Ce M and M lines vary with the coordination of the element. Significant shifts in position and shape were not observed when comparing the Ce M peaks of CeO2 and CePO4. Similar results were seen when comparing the available REE metal to the phosphate (Sm, Dy, Gd, Er, Yb). These wavescans suggest the use of the M or M lines if matrix matched standards are not available.

Microscopy and Microanalysis↗
USGS2012

USGS Environmental health science strategy: providing environmental health science for a changing world: Public review release

America has an abundance of natural resources. We have bountiful clean water, fertile soil, and unrivaled national parks, wildlife refuges, and public lands. These resources enrich our lives and preserve our health and wellbeing. These resources have been maintained because of our history of respect for their value and an enduring commitment to their vigilant protection. Awareness of the social, economic, and personal value of the health of our environment is increasing. The emergence of environmentally driven diseases caused by environmental exposure to contaminants and pathogens is a growing concern worldwide. New health threats and patterns of established threats are affected by both natural and anthropogenic changes to the environment. Human activities are key drivers of emerging (new and re-emerging) health threats. Societal demands for land and natural resources, a better quality of life, improved economic prosperity, and the environmental impacts associated with these demands will continue to increase. Natural earth processes, climate trends, and related climatic events will add to the environmental impact of human activities. These environmental drivers will influence exposure to disease agents, including viral, bacterial, prion, and fungal pathogens, parasites, natural earth materials, toxins and other biogenic compounds, and synthetic chemicals and substances. The U.S. Geological Survey (USGS) defines environmental health science broadly as the interdisciplinary study of relations among the quality of the physical environment, the health of the living environment, and human health. The interactions among these three spheres are driven by human activities, ecological processes, and natural earth processes; the interactions affect exposure to contaminants and pathogens and the severity of environmentally driven diseases in animals and people. This definition provides USGS with a framework for synthesizing natural science information from across the Bureau and providing it to environmental, natural resource, agricultural, and public-health managers. The USGS is a Federal science agency with a broad range of natural science expertise relevant to environmental health. USGS provides scientific information and tools as a scientific basis for management and policy decision making. USGS specializes in science at the environment-health interface, by characterizing the processes that affect the interaction among the physical environment, the living environment, and people, and the resulting factors that affect ecological and human exposure to disease agents. This report describes a 10-year strategy that encompasses the portfolio of USGS environmental health science. It summarizes national environmental health priorities that USGS is best suited to address, and will serve as a strategic framework for USGS environmental health science goals, actions, and outcomes for the next decade. Implementation of this strategy is intended to aid coordination of USGS environmental health activities and to provide a focal point for disseminating information to stakeholders. The "One Health" paradigm advocated by the World Health Organization (WHO, 2011), and the American Veterinary Medicine Association (AVMA, 2008), among others, is based on a general recognition that the health of humans, animals, and the environment are inextricably linked. Thus, successful efforts to protect that health will require increased interdisciplinary research and increased communication and collaboration among the broader scientific and health community. This strategy is built upon that paradigm. The vision, mission, and five cornerstone goals of the USGS Environmental Health Science Strategy were developed with significant input from a wide range of stakeholders. Vision - The USGS is a premier source of the environmental health science needed to safeguard the health of the environment, fish, wildlife, and people. Mission - The mission of USGS in environmental health science is to contribute scientific information to environmental, natural resource, agricultural, and public-health managers, who use that science to support sound decision making. USGS provides the science to: - Goal 1: Identify, prioritize, and detect contaminants and pathogens of emerging environmental concern. - Goal 2: Reduce the impact of contaminants on the environment, fish, wildlife, and people. - Goal 3: Reduce the impact of pathogens on the environment, fish, wildlife, and people. - Goal 4: Discover the complex interactions and combined effects of exposure to contaminants and pathogens. - Goal 5: Prepare for and respond to environmental impacts and related health threats of natural and anthropogenic disasters. Goals 1 through 4 are intended to provide science to address environmental health threats in a logical order, from informing prevention and preparedness, to supporting systematic management response to environmental health issues. Goal 4 addresses the interaction among contaminants and pathogens, an issue of emerging concern in environmental health science. Goal 5 acknowledges the fact that natural and anthropogenic disasters can cause immediate and prolonged adverse environmental health threats. This strategy proposes that USGS take the following strategic science actions to achieve each of the five goals of this strategy: Goal 1: Identify, prioritize, and detect contaminants and pathogens of emerging environmental concern. - Strategic Science Action 1. - Prioritize contaminants and pathogens of emerging concern to guide research, detection, and management activities. - Strategic Science Action 2. - Conduct surveillance and monitoring to provide early warning of emerging health threats. - Strategic Science Action 3. - Develop approaches and tools that identify vulnerable environmental settings, ecosystems, and species. Goal 2: Reduce the impact of contaminants on the environment, fish, wildlife, and people. - Strategic Science Action 1. - Systematically characterize the sources, occurrence, transport and fate of environmental contaminants to guide efforts to manage and mitigate contamination. - Strategic Science Action 2. - Evaluate the threats of contamination on the health of the environment, fish, wildlife, and people, and inform the associated management and protection efforts. - Strategic Science Action 3. - Characterize potential human exposure to support establishment of health-based standards or guidelines and contamination-reduction efforts. Goal 3: Reduce the impact of pathogens on the environment, fish, wildlife, and people. - Strategic Science Action 1. - Determine the biotic and abiotic factors that control the ecology of infectious diseases affecting natural populations of aquatic and terrestrial species and potential transmission to other animals and humans. - Strategic Science Action 2. - Establish how natural and anthropogenic environmental changes affect the distribution and severity of infectious diseases in natural populations of aquatic and terrestrial species and potential transmission to other animals and humans. - Strategic Science Action 3. - Develop surveillance systems to identify changing patterns of disease activity in priority geographic areas. Goal 4: Discover the complex interactions and combined effects of exposure to contaminants and pathogens. - Strategic Science Action 1. - Identify how exposure to one class of disease agents (contaminants or pathogens) can make an organism more susceptible to effects from exposure to the other class of disease agents. - Strategic Science Action 2. - Implement interdisciplinary studies that characterize the effects of combined exposure to pathogens and contaminants. Goal 5: Prepare for and respond to the environmental impacts and related health threats of natural and anthropogenic disasters. - Strategic Science Action 1. - Establish a formal interdisciplinary science capability to rapidly assess the environmental health risks associated with disasters. - Strategic Science Action 2. - Enhance methods to anticipate, prepare for, and identify environmental, ecological, and related health impacts of future disasters. This strategy is one of seven USGS science strategies developed concurrently: - Climate and Land Use Change - Core Science Systems - Ecosystems - Energy and Mineral Resources - Environmental Health - Natural Hazards - Water. This strategy describes how USGS will address the highest priority environmental health issues facing the Nation. The ultimate intended outcome of this science strategy is prevention and reduction of adverse impacts to the quality of the environment, the health of our living resources, and human health. Communication with, and receiving input from, partners and stakeholders regarding their science needs is essential for successful implementation of this strategy. It is incumbent on USGS to reach out to all stakeholders to ensure that USGS efforts are focused on the highest priority environmental health issues and that products are provided in the most timely and usable form to all those who can use them. USGS must reach out to the scientific community, internally and externally, to ensure that our efforts are integrated with and take full advantage of the activities of others.

Open-File Report↗
USGS2015

Direct measurement of asperity contact growth in quartz at hydrothermal conditions

Earthquake recurrence requires interseismic fault restrengthening which results from solid state deformation in room-temperature friction and indentation experiments. In contrast exhumed fault zones show solution-transport processes such as pressure solution and contact overgrowths influence fault zone properties . In the absence of fluid flow, overgrowths are driven by gradients in surface curvature where material is dissolved, diffuses, and precipitates at the contact without convergence normal to the contact. To determine the rate of overgrowth for quartz, we conducted single contact experiments in an externally heated pressure vessel. Convergence was continuously monitored using reflected-light interferometry through a long-working-distance microscope. Contact normal force was constant with an initial effective normal stress of 1.7 MPa, temperature was between 350 and 530{degree sign}C, and water pressure was constant at 150 MPa. Two control experiments were conducted: one dry at 425{degree sign}C and one bi-material (sapphire) at 425{degree sign}C and 150 MPa water pressure. No contact growth or convergence was observed in the controls. For wet single-phase contacts, growth was initially rapid and then decreased with time. No convergence was observed. Fluid inclusions indicate that the contact is not uniformly wetted. The contact is bounded by small regions of high aperture, reflecting local free-face dissolution as the source for the overgrowth. The apparent activation energy is ~125 kJ/mol. Extrapolation predicts rates of contact area increase orders of magnitude faster than in dry, room-temperature and hydrothermal friction experiments, suggesting that natural strength recovery near the base of the seismogenic zone could be dominated by contact overgrowth.

Journal of Geophysical Research B: Solid Earth↗
USGS2017

Investigating the landscape of Arroyo Seco—Decoding the past—A teaching guide to climate-controlled landscape evolution in a tectonically active region

Introduction Arroyo Seco is a river that flows eastward out of the Santa Lucia Range in Monterey County, California. The Santa Lucia Range is considered part of the central California Coast Range. Arroyo Seco flows out of the Santa Lucia Range into the Salinas River valley, near the town of Greenfield, where it joins the Salinas River. The Salinas River flows north into Monterey Bay about 40 miles from where it merges with Arroyo Seco. In the mountain range, Arroyo Seco has cut or eroded a broad and deep valley. This valley preserves a geologic story in the landscape that is influenced by both fault-controlled mountain building (tectonics) and sea level fluctuations (regional climate). Broad flat surfaces called river terraces, once eroded by Arroyo Seco, can be observed along the modern drainage. In the valley, terraces are also preserved like climbing stairs up to 1,800 feet above Arroyo Seco today. These terraces mark where Arroyo Seco once flowed.The terraces were formed by the river because no matter how high they are, the terraces are covered by gravel deposits exactly like those that can be observed in the river today. The Santa Lucia Range, Arroyo Seco, and the Salinas River valley must have looked very different when the highest and oldest terraces were forming. The Santa Lucia Range may have been lower, the Arroyo Seco may have been steeper and wider, and the Salinas River valley may have been much smaller. Arroyo Seco, like all rivers, is always changing. Some-times rivers flow very straight, and sometimes they are curvy. Sometimes rivers are cutting down or eroding the landscape, and sometimes they are not eroding but depositing material. Sometimes rivers are neither eroding nor transporting material. The influences that change the behavior of Arroyo Seco are mountain uplift caused by fault moment and sea level changes driven by regional climate change. When a stream is affected by one or both of these influences, the stream accommodates the change by eroding, depositing, and (or) changing its shape. In the vicinity of Arroyo Seco, the geologically young faulting history is relatively well understood. Geologists have some sense of the most recent faulting event and of the faulting in the recent geologic past. The timing of regional climate changes is also well accepted. In this area, warm climate cycles tend to cause the sea level to rise, and cool climate cycles tend to cause the sea level to fall. If we understand the way the terraces form and their ages in Arroyo Seco, we can draw conclusions about whether faulting and (or) climate contributed to their formation. This publication serves as a descriptive companion to the formal geologic map of Arroyo Seco (Taylor and Sweetkind, 2014) and is intended for use by nonscientists and students. Included is a discussion of the processes that controlled the evolution of the drainage and the formation of the terraces in Arroyo Seco. The reader is guided to well-exposed landscape features in an easily accessible environment that will help nonscientists gain an understanding of how features on a geologic map are interpreted in terms of earth processes.

California↗
USGS1954

Radioactive deposits in California

Reconnaissance examination by Government geologists of many areas, mine properties, and prospects in California during the period between 1948 and 1953 has confirmed the presence of radioactive materials in place at more than 40 localities. Abnormal radioactivity at these localities is due to concentrations of primary and secondary uranium minerals, to radon gas, radium (?), and to thorium minerals. Of the known occurrences only three were thought to contain uranium oxide (uranitite or pitchblende), 4 contained uranium-bearing columbate, tantalate, or titanate minerals, 12 contained secondary uranium minerals, such as autunite, carnotite, and torbernite, one contained radon gas, 7 contained thorium minerals, and, at the remaining 16 localities, the source of the anomalous radiation was not positively determined. The occurrences in which uranium oxide has been tentatively identified include the Rathgeb mine (Calaveras County), the Yerih group of claims (San Bernardino County), and the Rainbow claim (Madera County). Occurrences of secondary uranium minerals are largely confined to the arid desert regions of south-eastern California including deposits in San Bernardino, Kern, Inyo, and Imperial Counties. Uranium-bearing columbate, tantalate, or titanate minerals have been reported from pegmatite and granitic rock in southeastern and eastern California. Thorium minerals have been found in vein deposits in eastern San Bernardino County and from pegmatites and granitic rocks in various parts of southeastern California; placer concentrations of thorium minerals are known from nearly all areas in the State that are underlain, in part, by plutonic crystalline rocks. The primary uranium minerals occur principally as minute accessory crystals in pegmatite or granitic rock, or with base-metal sulfide minerals in veins. Thorium minerals also occur as accessory crystals in pegmatite or granitic rock, in placer deposits derived from such rock, and, at Mountain Pass, in veins containing rare earths. Secondary uranium minerals have been found as fracture coatings and as disseminations in various types of wall rock, although they are largely confined to areas of Tertiary volcanic rocks. Probably the uranium in the uraniferous deposits in California is related genetically to felsic crystalline rocks and felsic volcanic rocks; the present distribution of the secondary uranium minerals has been controlled, in part, by circulating ground waters and probably, in part, by magmatic waters related to the Tertiary volcanic activity. The thorium minerals are genetically related to the intrusion of pegmatite and plutonic crystalline rocks. None of the known deposits of radioactive minerals in California contain marketable reserves of uranium or thorium ore under economic conditions existing in 1952. With a favorable local market small lots of uranium ore may be available in the following places: the Rosamund prospect, the Rafferty and Chilson properties, the Lucky Star claim, and the Yerih group. The commercial production of thorium minerals will be possible, in the near future, only if these minerals can be recovered cheaply as a byproduct either from the mining of rare earths minerals at Mountain Pass or as a byproduct of placer mining for gold.

California↗