USGS Science⌕ Search

SEARCH · USGS Science

Results for “Remote Sensing Information”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58Linked to original sources
USGS2015

Archive of bathymetry data collected at Cape Canaveral, Florida, 2014

Remotely sensed, geographically referenced elevation measurements of the sea floor, acquired by boat- and aircraft-based survey systems, were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida, for the area at Cape Canaveral. The work was conducted as part of a study to describe an updated bathymetric dataset collected in 2014 and compare it to previous data sets. The updated data focus on the bathymetric features and sediment transport pathways that connect the offshore regions to the shoreline and, therefore, are related to the protection of other portions of the coastal environment, such as dunes, that support infrastructure and ecosystems. Cape Canaveral Coastal System (CCCS) is a prominent feature along the Southeast U.S. coastline and is the only large cape south of Cape Fear, North Carolina. Most of the CCCS lies within the Merritt Island National Wildlife Refuge and included within its boundaries are the Cape Canaveral Air Force Station (CCAFS), NASA’s Kennedy Space Center (KSC), and a large portion of Canaveral National Seashore. The actual promontory of the modern cape falls within the jurisdictional boundaries of the CCAFS. Hydrographic survey data were collected August 18-20, 2014 ( USGS Field Activity Number 2014-324-FA ). The study covered a 20 kilometer (km) section of shoreline extending from Port Canaveral, Fla., to the northern end of the KSC property, and from the shoreline to about 2.5 km offshore. Data were acquired using both sound navigation and ranging (sonar) and light detection and ranging (lidar) systems. Two jet skis and a 17-foot (ft) outboard motor boat equipped with the USGS SANDS (System for Accurate Nearshore Depth Surveying) hydrographic system collected precision sonar data. The USGS airborne EAARL-B mapping system flown in a twin engine airplane was used to collect lidar data. The missions were synchronized so that there was temporal and spatial overlap between the sonar and lidar operations. Additional data were collected to evaluate water clarity to verify the ability of lidar to receive bathymetric returns. Both systems used differential Global Positioning System GPS and utilized the National Oceanic and Atmospheric Administration/National Geodetic Survey (NOAA/NGS) Continuously Operating Reference Station (CORS) station located at CCAFS was used as the reference station. This data series serves as an archive of processed single-beam sonar and lidar bathymetry data. Graphical Information System (GIS) data products include XYZ point bathymetry data files, a color coded bathymetry map, and interpolated bathymetry grid surface. Additional information includes an error analysis and formal Federal Geographic Data Committee (FGDC) metadata. For more information about similar projects, please visit the Barrier Island Evolution Web site.

Florida↗
USGS2019

User needs for future Landsat missions

Landsat satellites have been operating since 1972, providing the longest continuous observation record of the Earth’s land surface. Over the past half century, the Landsat user community has grown exponentially, encompassing more diverse and evolving scientific research and operational uses. Understanding current and future user needs is crucial to informing the design of Landsat missions beyond Landsat 9. The U.S. Geological Survey (USGS) initiated a user needs collection process to document needs from U.S. Federal civil subject matter experts who rely on moderate-resolution land imaging data across a diverse range of scientific research and application domains. In total, 379 moderate-resolution land imaging user needs were collected through structured interviews. The findings indicate that, at present, users need continuity in Landsat capabilities with free and open data access. Improvements to future Landsat systems should include 10 m spatial resolution and at least weekly cloud-free observation frequency. Spectral enhancements should include the addition of red edge bands, and multiple, narrower visible, near infrared, shortwave infrared, and thermal infrared bands. Ideally, a variety of applications need continuous, full-spectrum coverage in 10 nm-wide bands spanning the visible to shortwave infrared (VSWIR) region (400–2500 nm) and 5 to 8 multispectral thermal infrared bands. Non-Federal (state, local, commercial, academic, and international) sources found similar results, but a more comprehensive comparison across these communities through a broader survey may provide additional insights. USGS-collected moderate-resolution land imaging user needs are an input to the Landsat 10 Architecture Study to develop and assess feasible Landsat 10 mission architectures.

Remote Sensing of Environment↗
USGS2019

High-resolution and accurate topography reconstruction of Mount Etna from Pleiades satellite data

The areas characterized by dynamic and rapid morphological changes need accurate topography information with frequent updates, especially if these are populated and involve infrastructures. This is particularly true in active volcanic areas such as Mount (Mt.) Etna, located in the northeastern portion of Sicily, Italy. The Mt. Etna volcano is periodically characterized by explosive and effusive eruptions and represents a potential hazard for several thousands of local people and hundreds of tourists present on the volcano itself. In this work, a high-resolution, high vertical accuracy digital surface model (DSM) of Mt. Etna was derived from Pleiades satellite data using the National Aeronautics and Space Administration (NASA) Ames Stereo Pipeline (ASP) tool set. We believe that this is the first time that the ASP using Pleiades imagery has been applied to Mt. Etna with sub-meter vertical root mean square error (RMSE) results. The model covers an area of about 400 km 2 with a spatial resolution of 2 m and centers on the summit portion of the volcano. The model was validated by using a set of reference ground control points (GCP) obtaining a vertical RMSE of 0.78 m. The described procedure provides an avenue to obtain DSMs at high spatial resolution and elevation accuracy in a relatively short amount of processing time, making the procedure itself suitable to reproduce topographies often indispensable during the emergency management case of volcanic eruptions.

Mount Etna↗
USGS2009

Updating the 2001 National Land Cover Database land cover classification to 2006 by using Landsat imagery change detection methods

The recent release of the U.S. Geological Survey (USGS) National Land Cover Database (NLCD) 2001, which represents the nation's land cover status based on a nominal date of 2001, is widely used as a baseline for national land cover conditions. To enable the updating of this land cover information in a consistent and continuous manner, a prototype method was developed to update land cover by an individual Landsat path and row. This method updates NLCD 2001 to a nominal date of 2006 by using both Landsat imagery and data from NLCD 2001 as the baseline. Pairs of Landsat scenes in the same season in 2001 and 2006 were acquired according to satellite paths and rows and normalized to allow calculation of change vectors between the two dates. Conservative thresholds based on Anderson Level I land cover classes were used to segregate the change vectors and determine areas of change and no-change. Once change areas had been identified, land cover classifications at the full NLCD resolution for 2006 areas of change were completed by sampling from NLCD 2001 in unchanged areas. Methods were developed and tested across five Landsat path/row study sites that contain several metropolitan areas including Seattle, Washington; San Diego, California; Sioux Falls, South Dakota; Jackson, Mississippi; and Manchester, New Hampshire. Results from the five study areas show that the vast majority of land cover change was captured and updated with overall land cover classification accuracies of 78.32%, 87.5%, 88.57%, 78.36%, and 83.33% for these areas. The method optimizes mapping efficiency and has the potential to provide users a flexible method to generate updated land cover at national and regional scales by using NLCD 2001 as the baseline.

Remote Sensing of Environment↗
USGS2019

Modeling barrier island habitats using landscape position information

Barrier islands are dynamic environments because of their position along the marine–estuarine interface. Geomorphology influences habitat distribution on barrier islands by regulating exposure to harsh abiotic conditions. Researchers have identified linkages between habitat and landscape position, such as elevation and distance from shore, yet these linkages have not been fully leveraged to develop predictive models. Our aim was to evaluate the performance of commonly used machine learning algorithms, including K-nearest neighbor, support vector machine, and random forest, for predicting barrier island habitats using landscape position for Dauphin Island, Alabama, USA. Landscape position predictors were extracted from topobathymetric data. Models were developed for three tidal zones: subtidal, intertidal, and supratidal/upland. We used a contemporary habitat map to identify landscape position linkages for habitats, such as beach, dune, woody vegetation, and marsh. Deterministic accuracy, fuzzy accuracy, and hindcasting were used for validation. The random forest algorithm performed best for intertidal and supratidal/upland habitats, while the K-nearest neighbor algorithm performed best for subtidal habitats. A posteriori application of expert rules based on theoretical understanding of barrier island habitats enhanced model results. For the contemporary model, deterministic overall accuracy was nearly 70%, and fuzzy overall accuracy was over 80%. For the hindcast model, deterministic overall accuracy was nearly 80%, and fuzzy overall accuracy was over 90%. We found machine learning algorithms were well-suited for predicting barrier island habitats using landscape position. Our model framework could be coupled with hydrodynamic geomorphologic models for forecasting habitats with accelerated sea-level rise, simulated storms, and restoration actions.

Remote Sensing↗
USGS2014

EAARL-B submerged topography: Barnegat Bay, New Jersey, pre-Hurricane Sandy, 2012

These remotely sensed, geographically referenced elevation measurements of lidar-derived submerged topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for part of Barnegat Bay, New Jersey, acquired pre-Hurricane Sandy on October 18, 22, 23, and 26, 2012. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed originally in a NASA-USGS collaboration. The exploration and processing of lidar data in an interactive or batch mode is supported using ALPS. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. The Airborne Lidar Processing System (ALPS) is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site.

New Jersey↗
USGS2020

Characterizing spatiotemporal patterns of crop phenology across North America during 2000–2016 using satellite imagery and agricultural survey data

Crop phenology represents an integrative indicator of climate change and plays a vital role in terrestrial carbon dynamics and sustainable agricultural development. However, spatiotemporal variations of crop phenology remain unclear at large scales. This knowledge gap has hindered our ability to realistically quantify the biogeochemical dynamics in agroecosystems, predict future climate, and make informed decisions for climate change mitigation and adaptation. In this study, we improved an EVI-curve-based approach and used it to detect spatiotemporal patterns in cropping intensity and five major phenological stages over North America during 2000–2016 using vegetation index in combination with agricultural survey data and other ancillary maps. Our predicted crop phenological stages showed strong linear relationships with the survey-based datasets, with R 2 , RMSEs, and MAEs in the ranges of 0.35 –0.99, three to ten days, and two to eight days, respectively. During the study period, the planting dates were advanced by 0.60 days/year ( p < 0.01), and harvesting dates were delayed by 0.78 days/year ( p < 0.01) over North America. A minimum temperature increase by 1 °C caused a 4.26-day planting advance (r = −0.50, p < 0. 01) or a 0.66-day harvest delay (r = 0.10, p < 0.01). While, a higher maximum temperature resulted in a planting advance by 4.48 days/°C (r = −0.62, p < 0.01) or a harvest advance by 2.22 days/°C (r = −0.40, p < 0.01). Our analysis illustrated evident spatiotemporal variations in crop phenology in response to climate change and management practices. The derived crop phenological datasets and cropping intensity maps can be used in regional climate assessments and in developing adaptation strategies.

ISPRS Journal of Photogrammetry and Remote Sensing↗
USGS2014

EAARL-B coastal topography: Fire Island, New York, pre-Hurricane Sandy, 2012: seamless (bare earth and submerged)

These remotely sensed, geographically referenced elevation measurements of lidar-derived seamless (bare-earth and submerged) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for part of Fire Island, New York, acquired pre-Hurricane Sandy on October 27, 2012. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed originally in a NASA-USGS collaboration. The exploration and processing of lidar data in an interactive or batch mode is supported using ALPS. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. The Airborne Lidar Processing System (ALPS) is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site.

New York↗
USGS2014

EAARL-B coastal topography: eastern New Jersey, Hurricane Sandy, 2012: first surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for a portion of the New Jersey coastline beachface, acquired pre-Hurricane Sandy on October 26, and post-Hurricane Sandy on November 1 and November 5, 2012. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar system, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map nearshore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site.

New Jersey↗
USGS2022

Section 5: Remote sensing of vegetation in the riparian corridor of the Colorado River’s delta 2013-2018

This remote sensing section is based on Nagler et al. (in preparation for the journal Hydrological Processes) and is a summary of the USGS preliminary findings to date. This report documents the changes in green foliage density (greenness) as measured by satellite vegetation index (VI) data and corresponding evapotranspiration (ET) in the riparian corridor of the Colorado River delta associated with the Minutes 319 and 323 environmental water deliveries using time-series data from 2013 through 2018. The report focuses on what happened only within the riparian corridor’s seven reaches since the 2014 flows, and despite being a continuation of measuring greenness and ET after the 2017 end of Minute 319, this study continued the tracking of these two variables, greenness and ET, in these original riparian corridor focal areas. Two spatial scales are used here: (1) Landsat satellite imagery at 30 m pixels and (2) the EOS-1 satellite sensor the Moderate Resolution Imaging Spectrometer (MODIS) with a resolution of 250 m pixels. The focal period includes 2013 (prepulse flow) and the years 2014-2018, with a focus on imagery collected from the Summer growing seasons 2014 through 2018 (one-year, pre-pulse and several post-pulse years, respectively). This report re-creates the 2013-2017 Landsat-based results from Jarchow et al. (2017a, b) by using the same region of interest (ROI). The report now provides revised and re-created results using all new imagery acquisition and processing techniques, as well as extraction code, created by the Vegetation Index and Phenology (VIP) Lab of the Biosystems Engineering Department of the University of Arizona (UofA). In 2018, methods employed by the VIP lab (and not ArcGIS) were used. ArcGIS was only used in the newly processed data to display the final difference maps. The entire spatial tile data from NASA was downloaded and processed at the VIP Lab using satellite imagery at two resolutions: 250 m MODIS and 30 m Landsat using three sensors, Landsat 5, Landsat 7 ETM+ and Landsat 8 Operational Land Imager (OLI), with added scenes for each year based on new clear atmosphere requirements. The VIP lab clipped the river boundary and seven riparian reaches from the previously existing ROI used in Jarchow et al. (2017 a, b) for the analyses done under Minute 319. The NASA image datasets for this riparian corridor ROI in seven reaches were re-processed to produce additional vegetation index (VI) information for years 2013 to 2018 for this report. At the same time, the report acquired and processed imagery from 2000- 2018 (data outside the scope of this report and data not shown here). The additional VIs (NDVI, scaled NDVI, EVI, EVI2) were analyzed so that new assessments of greenness and ET could be produced from the imagery datasets following methods in Nagler et al. (2013). These VI choices were based on previous performance comparisons between biophysical ground-based data and radiometric satellite-based data collected from this riparian ecosystem (Nagler et al., 2001) as well as performance related to ET estimation (Nagler et al., 2005a, b) and current advancements in VIs such as EVI2.

Colorado River Delta↗
USGS2010

EAARL Coastal Topography-Chandeleur Islands, Louisiana, 2010: Bare Earth

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and submerged topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Chandeleur Islands, acquired March 3, 2010. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2024

SSEBop evapotranspiration estimates using synthetically derived Landsat data from the continuous change detection and classification algorithm

The operational Simplified Surface Energy Balance (SSEBop) model has been utilized to generate gridded evapotranspiration data from Landsat images. These estimates are primarily driven by two sources of information: reference evapotranspiration and Landsat land surface temperature (LST) values. Hence, SSEBop is limited by the availability of Landsat data. Here, in this proof-of-concept paper, we utilize the Continuous Change Detection and Classification (CCDC) algorithm to generate synthetic Landsat data, which are then used as input for SSEBop to generate evapotranspiration estimates for six target areas in the continental United States, representing forests, shrublands, and irrigated agriculture. These synthetic land cover data are then used to generate the LST data required for SSEBop evapotranspiration estimates. The synthetic LST, evaporative fractions, and evapotranspiration data from CCDC closely mirror the phenological cycles in the observed Landsat data. Across the six sites, the median correlation in seasonal LST was 0.79, and the median correlation in seasonal evapotranspiration was 0.8. The median root mean squared error (RMSE) values were 2.82 °C for LST and 0.50 mm/day for actual evapotranspiration. CCDC predictions typically underestimate the average evapotranspiration by less than 1 mm/day. The average performance of the CCDC evaporative fractions, and corresponding evapotranspiration estimates, were much better than the initial LST estimates and, therefore, promising. Future work could include bias correction to improve CCDC’s ability to accurately reproduce synthetic Landsat data during the summer, allowing for more accurate evapotranspiration estimates, and determining the ability of SSEBop to predict regional evapotranspiration at seasonal timescales based on projected land cover change from CCDC.

Remote Sensing↗
USGS2010

EAARL Coastal Topography-Maryland and Delaware, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL. This project provides highly detailed and accurate datasets of a portion of the eastern Maryland and Delaware coastline beachface, acquired post-Nor'Ida (November 2009 nor'easter) on November 28 and 30, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2016

Exploiting differential vegetation phenology for satellite-based mapping of semiarid grass vegetation in the southwestern United States and northern Mexico

We developed and evaluated a methodology for subpixel discrimination and large-area mapping of the perennial warm-season (C 4 ) grass component of vegetation cover in mixed-composition landscapes of the southwestern United States and northern Mexico. We describe the methodology within a general, conceptual framework that we identify as the differential vegetation phenology (DVP) paradigm. We introduce a DVP index, the Normalized Difference Phenometric Index (NDPI) that provides vegetation type-specific information at the subpixel scale by exploiting differential patterns of vegetation phenology detectable in time-series spectral vegetation index (VI) data from multispectral land imagers. We used modified soil-adjusted vegetation index (MSAVI 2 ) data from Landsat to develop the NDPI, and MSAVI 2 data from MODIS to compare its performance relative to one alternate DVP metric (difference of spring average MSAVI 2 and summer maximum MSAVI 2 ), and two simple, conventional VI metrics (summer average MSAVI 2 , summer maximum MSAVI 2 ). The NDPI in a scaled form (NDPI s ) performed best in predicting variation in perennial C 4 grass cover as estimated from landscape photographs at 92 sites (R 2 = 0.76, p < 0.001), indicating improvement over the alternate DVP metric (R 2 = 0.73, p < 0.001) and substantial improvement over the two conventional VI metrics (R 2 = 0.62 and 0.56, p < 0.001). The results suggest DVP-based methods, and the NDPI in particular, can be effective for subpixel discrimination and mapping of exposed perennial C 4 grass cover within mixed-composition landscapes of the Southwest, and potentially for monitoring of its response to drought, climate change, grazing and other factors, including land management. With appropriate adjustments, the method could potentially be used for subpixel discrimination and mapping of grass or other vegetation types in other regions where the vegetation components of the landscape exhibit contrasting seasonal patterns of phenology.

Arizona↗
USGS2014

EAARL-B submerged topography: Barnegat Bay, New Jersey, post-Hurricane Sandy, 2012-2013

These remotely sensed, geographically referenced elevation measurements of lidar-derived submerged topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for part of Barnegat Bay, New Jersey, acquired post-Hurricane Sandy on November 1, 5, 16, 20, and 30, 2012; December 5, 6, and 21, 2012; and January 10, 2013. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar system, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map nearshore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed originally in a NASA-USGS collaboration. The exploration and processing of lidar data in an interactive or batch mode is supported using ALPS. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. The Airborne Lidar Processing System (ALPS) is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site .

New Jersey↗
USGS2010

EAARL Coastal Topography-Eastern Florida, Post-Hurricane Jeanne, 2004: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the eastern Florida coastline beachface, acquired post-Hurricane Jeanne (September 2004 hurricane) on October 1, 2004. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2021

Developing bare-earth digital elevation models from structure-from-motion data on barrier islands

Unoccupied aerial systems can collect aerial imagery that can be used to develop structure-from-motion products with a temporal resolution well-suited to monitoring dynamic barrier island environments. However, topographic data created using photogrammetric techniques such as structure-from-motion represent the surface elevation including the vegetation canopy . Additional processing is required for estimating bare-earth elevation, which is critical for understanding the underlying geomorphology of these islands. In this study, we used a vegetation and elevation survey to produce bare-earth digital elevation models from structure-from-motion-derived elevation products for two sites on Dauphin Island, Alabama (USA). One site was exposed to high wave energy and included a mix of beach, dune, and barrier flat habitats that were dominated by supratidal/upland herbaceous vegetation. The second site was exposed to low wave energy and was dominated by intertidal marsh. Aerial imagery was collected in late fall of 2018 and spring of 2019. We tested several machine learning algorithms for predicting and removing elevation bias for vegetated areas using predictors that included spectral indices from unoccupied aerial systems-based multispectral imagery and landscape position information (e.g., relative topography and distance from shore). Models were developed for each site and season. We also explored how well the model from one season generalized to data from a different season for the same site. For developing initial digital surface models, we found that utilizing a minimum bin algorithm, as opposed to interpolation, led to lower elevation bias. For bias removal, Gaussian process regression performed the best and led to a root mean square error for the bare-earth digital elevation models of around 0.10 m for the high energy site and 0.15 m for the low energy site. Compared to the digital surface models, the root mean square error for the bare-earth digital elevation models was reduced by at least 29 percent for the high energy site and 69 percent for the low energy site. For all models, common predictors included surface elevation, vegetation greenness, and distance from the shoreline. The models produced comparable results when trained using data from a different season. The error estimates for all analyses were within published elevation standards for lidar data for vegetated areas. With calibration, this approach could be portable to other areas or data, such as aerial lidar (conventional or unoccupied), to provide an efficient and repeatable framework for monitoring geomorphology or provide baseline elevations for predicting changes to these environments under future conditions.

Alabama↗
USGS2010

EAARL Coastal Topography-Eastern Louisiana Barrier Islands, Post-Hurricane Gustav, 2008: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the eastern Louisiana barrier islands, acquired post-Hurricane Gustav (September 2008 hurricane) on September 6 and 7, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗