SEARCH · USGS Science

Results for “Modern Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58Linked to original sources

USGS2021

Tectonic and magmatic controls on the metallogenesis of porphyry deposits in Alaska

Porphyry Cu and Mo deposits and occurrences are found throughout Alaska; they formed episodically during repeated subduction and arc-continent collisions spanning the Silurian to Quaternary. Porphyry systems occur in continental-margin and island arcs, which are broadly grouped into pre-accretionary or post-accretionary arcs. Pre-Mesozoic occurrences formed in continental or island arcs prior to accretion onto the margin of North America, whereas Mesozoic and younger systems formed in arcs that developed after terrane fragments were accreted to the margin of North America. As a result, older porphyry systems are typically in the interior and northern metallogenic belts, whereas the younger porphyry systems are predominantly found in the southern third of the state, closer to the modern continental margin. Alaska porphyry formation peaked in the mid-Cretaceous and continued through the Late Cretaceous to Tertiary, in association with continental-margin arcs extending from the eastern interior, into southwest Alaska and along the Alaska Peninsula and Aleutian Islands. Porphyry system formation is not generally recognized in the Early Cretaceous, Triassic, or early Paleozoic – time periods that coincide with continental collisional events or extension. Relatively few pre-accretionary porphyry systems are documented in more deeply exhumed arc segments due to low preservation potential in areas of rapid or repeated bedrock uplift and associated erosion that occurred during later tectonic events. Significant diversity is observed in porphyry occurrences across the state and even within the same region. Occurrences form in association with arc-related intrusions or intrusive complexes, that range in composition from diorite to syenite, but are commonly monzonitic to granitic. Some porphyry occurrences are associated with alkaline intrusive belts that exhibit a stronger crustal contribution to magmatic sources. Intrusions associated with porphyry formation in Alaska are commonly moderately oxidized, however, a distinct group of porphyry systems are associated with more-reduced magmas. Hydrothermal alteration described at many occurrences exhibits zoning from proximal potassic alteration to typically peripheral and(or) later sericitic alteration, that is flanked by large zones of propylitic alteration. Diversity in alteration is observed where sodic and sodic-calcic alteration is present, commonly in more-enigmatic deposits, such as Island Mountain and Chicken Mountain. Advanced argillic alteration is rare, but present in notable examples, such as the Pebble porphyry Cu(-Au-Mo) deposit. Sulfide mineralization is characterized by pyrite, chalcopyrite, molybdenite, and rare bornite hosted in veinlets, veins and disseminations in wallrocks and causative intrusions. Some porphyry systems contain abundant pyrrhotite and(or) arsenopyrite in the mineral assemblages. Systems that exhibit bornite-bearing assemblages containing abundant molybdenite are commonly arsenic- and gold-poor and tend to be associated with more oxidized arc magmas. In contrast, those systems that are pyrrhotite and(or) arsenopyrite dominant tend to be gold, arsenic, and bismuth bearing, and are commonly associated with more-reduced magmas. Exploration for porphyry occurrences in Alaska has experienced a resurgence and currently constitutes about 20% of exploration dollars in the state. Many systems lack complete descriptions, and coupled with the cost of exploration, remain incompletely explored. Additional understanding of known occurrences combined with a framework geologic understanding of porphyry-bearing metallogenic belts will likely result in new discoveries in the future.

Alaska↗

USGS1993

Inorganic geochemistry of domed peat in Indonesia and its implication for the origin of mineral matter in coal

The inorganic geochemistry of three domed ombrogenous peat deposits in Riau and West Kalimantan provinces, Indonesia, was investigated as a possible modern analogue for certain types of low-ash, low-sulfur coal. Mineral matter entering the deposits is apparently limited to small amounts from the allogenic sources of dryfall, rainfall, and diffusion from substrate pore water. In the low-ash peat in the interior of the deposits, a large portion of the mineral matter is authigenic and has been mobilized and stabilized by hydrological, chemical, and biological processes and conditions. Ash yield and sulfur content are low through most of the peat deposits and average 1.1% and 0.14%, respectively, on a moisture-free basis. Ash and sulfur contents only exceed 5% and 0.3%, respectively, near the base of the deposits, with maximum concentrations of 19.9% ash and 0.56% sulfur. Peat water in all three deposits has a low pH, about 4 units, and low dissolved cation concentration, averaging 14 ppm. Near the base, in the geographic interior of each peat deposit, pH is about two units higher and dissolved cation concentration averages 110 ppm. Relative concentrations of the inorganic constituents vary, resulting in chemical facies in the peat. In general, Si, Al, and Fe are the abundant inorganic constituents, although Mg, Ca, and Na dominate in the middle horizon in the geographic interior of coastal peat deposits. The composition of the three deposits reported in this paper indicates that domed ombrogenous peat deposits will result in low ash and sulfur coal, probably less than 10% ash and 1% sulfur, even if marine rocks are laterally and vertically adjacent to the coal.

Special Paper of the Geological Society of America↗

USGS1999

Preliminary geologic map of the San Guillermo Mountain Quadrangle, Ventura County, California

New 1:24,000-scale geologic mapping in the Cuyama 30' x 60' quadrangle, in support of the USGS Southern California Areal Mapping Project (SCAMP), is contributing to a more complete understanding of the stratigraphy, structure, and tectonic evolution of the complex junction area between the NW-striking Coast Ranges and EW-striking western Transverse Ranges. The 1:24,000-scale geologic map of the San Guillermo Mountain quadrangle is one of six contiguous 7 1/2' quadrangle geologic maps in the eastern part of the Cuyama map area being compiled for a more detailed portrayal and reevaluation of geologic structures and rock units shown on previous geologic maps of the area (e.g., Dibblee, 1979). The following observations and interpretations are based on the new San Guillermo Mountain geologic compilation: (1) The new geologic mapping in the northern part of the San Guillermo Mountain quadrangle allows for reinterpretation of fault architecture that bears on potential seismic hazards of the region. Previous mapping had depicted the eastern Big Pine fault (BPF) as a northeast-striking, sinistral strike-slip fault that extends for 30 km northeast of the Cuyama River to its intersection with the San Andreas fault (SAF). In contrast the new mapping indicates that the eastern BPF is a thrust fault that curves from a northeast strike to an east strike, where it is continuous with the San Guillermo thrust fault, and dies out further east about 15 km south of the SAF. This redefined segment of the BPF is a south-dipping, north-directed thrust, with dominantly dip slip components (rakes > 60 deg.), that places Middle Eocene marine rocks (Juncal and Matilija Formations) over Miocene through Pliocene(?) nonmarine rocks (Caliente, Quatal, and Morales Formations). Although a broad northeast-striking fault zone, exhibiting predominantly sinistral components of slip (rakes < 45 deg.), extends to the SAF as previously mapped, the fault zone does not connect to the southwest with the BPF but instead curves into a southwest-directed thrust fault system a short distance north of the BPF. Oligocene to Pliocene(?) nonmarine sedimentary and volcanic rocks of the Plush Ranch, Caliente, and Morales(?) Formations are folded on both sides of this fault zone (informally named the Lockwood Valley fault zone [LVFZ] on the map). South-southeast of the LVFZ overturned folds have southward vergence. Several moderate-displacement (< 50 m), mainly northwest-dipping thrust and reverse faults, exhibiting mostly sinistral-oblique slip, flank and strike parallel to the overturned folds. The fold vergence and thrust direction associated with the LVFZ is opposite to that of the redefined BPF, providing further evidence that the two faults are distinct structures. These revised fault interpretations bring into question earlier estimates of net sinistral strike-slip displacement of as much as 13 km along the originally defined eastern BPF, which assumed structural connection with the LVFZ. Also, despite sparse evidence for repeated Quaternary movement on the LVFZ (e.g., Dibblee, 1982), the potential for a large earthquake involving coseismic slip on both the LVFZ and the central BPF to the southwest may not be as great as once believed. (2) Several generations of Pleistocene and younger dissected alluvial terrace and fan deposits sit at various levels above modern stream channels throughout the quadrangle. These deposits give testimony to the recent uplift and related fault deformation that has occurred in the area. (3) A vast terrane of Eocene marine sedimentary rocks (Juncal and Matilija Formations and Cozy Dell Shale) exposed south of the Big Pine fault forms the southern two-thirds of the San Guillermo Mountain quadrangle. Benthic foraminifers collected from various shale intervals within the Juncal Formation indicate a Middle Eocene age (Ulatisian) for the entire formation (K. McDougall, unpub. data, 1998) and deposition at paleodepths as great as 2,000 m (i.e., lowe

California↗

USGS2022

Hydrogeology and groundwater quality in the San Agustin Basin, New Mexico, 1975–2019

This report describes the findings of a U.S. Geological Survey study, completed in cooperation with the Bureau of Land Management, focused on better understanding the present-day (1975–2019) hydrogeology and groundwater quality of the San Agustin Basin in west-central New Mexico to support sustainable groundwater resource management. The basin hosts a relatively undeveloped basin-fill and alluvium aquifer system and is topographically divided into east and west subbasins by the McClure Hills. Groundwater chemistry and groundwater elevation data were compiled, collected, and interpreted in the context of groundwater flow and quality. The analyses presented in this report consider groundwater chemistry data collected within the last decade (2010–19) and groundwater elevation data collected from 1975 through 2019 to provide insight into present-day conditions. Groundwater elevations show that groundwater typically moves from the highlands to the lowlands, with a prominent east to west regional trend. Groundwater elevations were lowest in the southwestern portion of the west subbasin, where estimated flow directions suggest underflow through the local highlands into the northern East Fork Gila River watershed, which is further supported by historical groundwater elevation data from the northern East Fork Gila River watershed. Gradual groundwater elevation gradients (about 2 feet per mile) near the east and west subbasin divide suggest that groundwater slowly flows from the east subbasin to the west subbasin. Quantitative analyses of groundwater chemistry data show that groundwater in both subbasins has similar chemical characteristics. A systematic east to west groundwater evolution in water chemistry was not observed despite evidenced subbasin connectivity. The absence of this pattern suggests that groundwater mixing is regionally prevalent, sediment reactivity is low and variable, and (or) recharge conditions are comparable in both subbasins. Groundwater chemistry was generally independent of aquifer type, suggesting that the aquifers are hydrologically well connected. Corrected carbon-14 groundwater age estimates in the basin ranged from 232 to 13,916 years before present with a median of 5,409 years. A wide range of groundwater ages is therefore present in the basin, with waters commonly being thousands of years old, thereby supporting generally slow regional groundwater movement. A component of relatively young groundwater, for which estimated ages could not be accurately computed, is also present in the basin, and it may commonly mix with older waters. The spatial distribution of categorical and quantitative groundwater ages indicates that most recharge likely occurs in the highlands through mountain-block recharge and as focused recharge within arroyos, although evidence of modern (1953 and after) groundwater was minimal at sampled sites. Median annual gradients (groundwater elevation change over time) indicate that most groundwater elevations in the lowlands changed little (−0.2 to 0.2 foot per year) from 1975 through 2019. Groundwater elevations in the highlands varied more annually, which is likely due to recharge from precipitation events. These more variable groundwater elevations in the highlands compared with the lowlands, along with groundwater ages, provide further evidence that most groundwater recharge takes place in the highlands, with minimal recharge in the lowlands. Median groundwater elevation change for all sites was −0.05 foot per year. Temporal consistency of lowland groundwater elevations suggests that regional groundwater dynamics have been more or less stable through time under current climate and development conditions, although median annual gradients indicate that groundwater elevations may have slightly declined on average between 1975 and 2019.

New Mexico↗

USGS1984

Models for the deposition of Mesozoic-Cenozoic fine-grained organic-carbon-rich sediment in the deep sea

The widespread occurrence of organic-carbon-rich strata (‘black shales’) in certain portions of Jurassic, Cretaceous and Cenozoic sequences has been well-documented from Deep Sea Drilling Project sites in the Atlantic and Pacific Oceans and from sequences, now exposed on land, originally deposited in the Tethyan ocean. These ancient black shales usually have been explained by analogy with examples of modern deep-sea sediments in which organic matter locally is preserved by (1) increasing the supply of organic matter, (2) increasing the rate of sedimentation, and/or (3) decreasing the oxygen content of the bottom water. However, detailed examination of many black shales reveals characteristics that cannot be explained by simple local models, including: their approximate coincidence in time globally; their occurrence in a variety of different environments, including open oxygenated oceans, restricted basins, deep and shallow water; their interbedding with organic-carbonpoor strata which often dominate a so-called black shale sequence; their deposition by pelagic, hemipelagic, turbiditic and other processes; and the variations in type and amount of organic matter that occur even within the same sequence. A more complex model for the origin of black shales therefore appears most appropriate, in which the cyclic preservation of organic matter depends on the interplay of the three main variables, namely supply of organic matter, sedimentation rate, and deep-water oxygenation, each of which varies independently to some extent. The variation and relative importance of these parameters in individual basins and widespread black shale deposition in general are linked globally and temporally by changes in global sea-level, climate and related changes in oceanic circulation. An important and often overlooked factor for the supply of organic matter to deep-basin sediments is the frequency and magnitude of redepositional processes. The interplay of these variables is discussed in relation to the middle Cretaceous and Cenozoic organic-carbon-rich strata, in particular, which show marked differences in the relative importance of the different variables.

Geological Society of London Special Publications↗

USGS2012

Geohydrology of Big Bear Valley, California: phase 1--geologic framework, recharge, and preliminary assessment of the source and age of groundwater

The Big Bear Valley, located in the San Bernardino Mountains of southern California, has increased in population in recent years. Most of the water supply for the area is pumped from the alluvial deposits that form the Big Bear Valley groundwater basin. This study was conducted to better understand the thickness and structure of the groundwater basin in order to estimate the quantity and distribution of natural recharge to Big Bear Valley. A gravity survey was used to estimate the thickness of the alluvial deposits that form the Big Bear Valley groundwater basin. This determined that the alluvial deposits reach a maximum thickness of 1,500 to 2,000 feet beneath the center of Big Bear Lake and the area between Big Bear and Baldwin Lakes, and decrease to less than 500 feet thick beneath the eastern end of Big Bear Lake. Interferometric Synthetic Aperture Radar (InSAR) was used to measure pumping-induced land subsidence and to locate structures, such as faults, that could affect groundwater movement. The measurements indicated small amounts of land deformation (uplift and subsidence) in the area between Big Bear Lake and Baldwin Lake, the area near the city of Big Bear Lake, and the area near Sugarloaf, California. Both the gravity and InSAR measurements indicated the possible presence of subsurface faults in subbasins between Big Bear and Baldwin Lakes, but additional data are required for confirmation. The distribution and quantity of groundwater recharge in the area were evaluated by using a regional water-balance model (Basin Characterization Model, or BCM) and a daily rainfall-runoff model (INFILv3). The BCM calculated spatially distributed potential recharge in the study area of approximately 12,700 acre-feet per year (acre-ft/yr) of potential in-place recharge and 30,800 acre-ft/yr of potential runoff. Using the assumption that only 10 percent of the runoff becomes recharge, this approach indicated there is approximately 15,800 acre-ft/yr of total recharge in Big Bear Valley. The INFILv3 model was modified for this study to include a perched zone beneath the root zone to better simulate lateral seepage and recharge in the shallow subsurface in mountainous terrain. The climate input used in the INFILv3 model was developed by using daily climate data from 84 National Climatic Data Center stations and published Parameter Regression on Independent Slopes Model (PRISM) average monthly precipitation maps to match the drier average monthly precipitation measured in the Baldwin Lake drainage basin. This model resulted in a good representation of localized rain-shadow effects and calibrated well to measured lake volumes at Big Bear and Baldwin Lakes. The simulated average annual recharge was about 5,480 acre-ft/yr in the Big Bear study area, with about 2,800 acre-ft/yr in the Big Bear Lake surface-water drainage basin and about 2,680 acre-ft/yr in the Baldwin Lake surface-water drainage basin. One spring and eight wells were sampled and analyzed for chemical and isotopic data in 2005 and 2006 to determine if isotopic techniques could be used to assess the sources and ages of groundwater in the Big Bear Valley. This approach showed that the predominant source of recharge to the Big Bear Valley is winter precipitation falling on the surrounding mountains. The tritium and uncorrected carbon-14 ages of samples collected from wells for this study indicated that the groundwater basin contains water of different ages, ranging from modern to about 17,200-years old.The results of these investigations provide an understanding of the lateral and vertical extent of the groundwater basin, the spatial distribution of groundwater recharge, the processes responsible for the recharge, and the source and age of groundwater in the groundwater basin. Although the studies do not provide an understanding of the detailed water-bearing properties necessary to determine the groundwater availability of the basin, they do provide a framework for the future development of a groundwater model that would help to improve the understanding of the potential hydrologic effects of water-management alternatives in Big Bear Valley.

California↗

USGS2004

A modern vs. Permian black shale - the hydrography, primary productivity, and water-column chemistry of deposition

The sediment currently accumulating in the Cariaco Basin, on the continental shelf of Venezuela, has an elevated organic-carbon content of approximately 5%; is accumulating under O2-depleted bottom-water conditions (SO42- reduction); is composed dominantly of foraminiferal calcite, diatomaceous silica, clay, and silt; and is dark greenish gray in color. Upon lithification, it will become a black shale. Recent studies have established the hydrography of the basin and the level of primary productivity and bottom-water redox conditions. These properties are used to model accumulation rates of Cd, Cr, Cu, Mo, Ni, V, and Zn on the seafloor. The model rates agree closely with measured rates for the uppermost surface sediment.The model is applied to the Meade Peak Phosphatic Shale Member of the Phosphoria Formation, a phosphate deposit of Permian age in the northwest United States. It too has all of the requisite properties of a black shale. Although the deposit is a world-class phosphorite, it is composed mostly of phosphatic mudstone and siltstone, chert, limestone, and dolomite. It has organic-carbon concentrations of up to 15%, is strongly enriched in several trace elements above a terrigenous contribution and is black. The trace-element accumulation defines a mean primary productivity in the photic zone of the Phosphoria Basin as moderate, at 500 g m-2 year-1 organic carbon, comparable to primary productivity in the Cariaco Basin. The source of nutrient-enriched water that was imported into the Phosphoria Basin, upwelled into the photic zone, and supported primary productivity was an O2 minimum zone of the open ocean. The depth range over which the water was imported would have been between approximately 100 and 600 m. The mean residence time of bottom water in the basin was approximately 4 years vs. 100 years in the Cariaco Basin. The bottom water was O2 depleted, but it was denitrifying, or NO3- reducing, rather than SO42- reducing. Published by Elsevier B.V.

Chemical Geology↗

USGS2005

"Sour gas" hydrothermal jarosite: Ancient to modern acid-sulfate mineralization in the southern Rio Grande Rift

As many as 29 mining districts along the Rio Grande Rift in southern New Mexico contain Rio Grande Rift-type (RGR) deposits consisting of fluorite-barite??sulfide-jarosite, and additional RGR deposits occur to the south in the Basin and Range province near Chihuahua, Mexico. Jarosite occurs in many of these deposits as a late-stage hydrothermal mineral coprecipitated with fluorite, or in veinlets that crosscut barite. In these deposits, many of which are limestone-hosted, jarosite is followed by natrojarosite and is nested within silicified or argillized wallrock and a sequence of fluorite-barite??sulfide and late hematite-gypsum. These deposits range in age from ???10 to 0.4 Ma on the basis of 40Ar/39Ar dating of jarosite. There is a crude north-south distribution of ages, with older deposits concentrated toward the south. Recent deposits also occur in the south, but are confined to the central axis of the rift and are associated with modern geothermal systems. The duration of hydrothermal jarosite mineralization in one of the deposits was approximately 1.0 my. Most ??18OSO4-OH values indicate that jarosite precipitated between 80 and 240 ??C, which is consistent with the range of filling temperatures of fluid inclusions in late fluorite throughout the rift, and in jarosite (180 ??C) from Pen??a Blanca, Chihuahua, Mexico. These temperatures, along with mineral occurrence, require that the jarosite have had a hydrothermal origin in a shallow steam-heated environment wherein the low pH necessary for the precipitation of jarosite was achieved by the oxidation of H2S derived from deeper hydrothermal fluids. The jarosite also has high trace-element contents (notably As and F), and the jarosite parental fluids have calculated isotopic signatures similar to those of modern geothermal waters along the southern rift; isotopic values range from those typical of meteoric water to those of deep brine that has been shown to form from the dissolution of Permian evaporite by deeply circulating meteoric water. Jarosite ??34S values range from -24??? to 5???, overlapping the values for barite and gypsum at the high end of the range and for sulfides at the low end. Most ??34S values for barite are 10.6??? to 13.1???, and many ??34S values for gypsum range from 13.1??? to 13.9??? indicating that a component of aqueous sulfate was derived from Permian evaporites (??34 S=12??2???). The requisite H2SO4 for jarosite formation was derived from oxidation of H2S which was likely largely sour gas derived from the thermochemical reduction of Permian sulfate. The low ??34S values for the precursor H2S probably resulted from exchange deeper in the basin with the more abundant Permian SO42- at ???150 to 200 ??C. Jarosite formed at shallow levels after the pH buffering capacity of the host rock (typically limestone) was neutralized by precipitation of earlier minerals. Some limestone-hosted deposits contain caves that may have been caused by the low pH of the deep basin fluids due to the addition of deep-seated HF and other magmatic gases during periods of renewed rifting. Caves in other deposits may be due to sulfuric acid speleogenesis as a result of H2S incursion into oxygenated groundwaters. The isotopic data in these "sour gas" jarosite occurrences encode a record of episodic tectonic or hydrologic processes that have operated in the rift over the last 10 my. ?? 2004 Elsevier B.V. All rights reserved.

Chemical Geology↗

USGS2012

Refining the model of barrier island formation along a paraglacial coast in the Gulf of Maine

Details of the internal architecture and local geochronology of Plum Island, the longest barrier in the Gulf of Maine, have refined our understanding of barrier island formation in paraglacial settings. Ground-penetrating radar and shallow-seismic profiles coupled with sediment cores and radiocarbon dates provide an 8000-year evolutionary history of this barrier system in response to changes in sediment sources and supply rates as well as variability in the rate of sea-level change. The barrier sequence overlies tills of Wisconsinan and Illinoian glaciations as well as late Pleistocene glaciomarine clay deposited during the post-glacial sea-level highstand at approximately 17 ka. Holocene sediment began accumulating at the site of Plum Island at 7–8 ka, in the form of coarse fluvial channel-lag deposits related to the 50-m wide erosional channel of the Parker River that carved into underlying glaciomarine deposits during a lower stand of sea level. Plum Island had first developed in its modern location by ca. 3.6 ka through onshore migration and vertical accretion of reworked regressive and lowstand deposits. The prevalence of southerly, seaward-dipping layers indicates that greater than 60% of the barrier lithosome developed in its modern location through southerly spit progradation, consistent with a dominantly longshore transport system driven by northeast storms. Thinner sequences of northerly, landward-dipping clinoforms represent the northern recurve of the prograding spit. A 5–6-m-thick inlet-fill sequence was identified overlying the lower stand fluvial deposit; its stratigraphy captures events of channel migration, ebb-delta breaching, onshore bar migration, channel shoaling and inlet infilling associated with the migration and eventual closure of the inlet. This inlet had a maximum cross-sectional area of 2800 m2 and was active around 3.5–3.6 ka. Discovery of this inlet suggests that the tidal prism was once larger than at present. Bay infilling, driven by the import of sediment into the backbarrier environment through tidal inlets, as well as minor sediment contribution from local rivers, led to a vast reduction in the bay tidal prism. This study demonstrates that, prior to about 3 ka, Plum Island and its associated marshes, tidal flats, and inlets were in a paraglacial environment; that is, their main source of sediment was derived from the erosion and reworking of glaciogenic deposits. Since that time, Plum Island has been in a state of dynamic equilibrium with its non-glacial sediment sources and therefore can be largely considered to be in a stable, “post-paraglacial” state. This study is furthermore the first in the Gulf of Maine to show that spit accretion and inlet processes were the dominant mechanisms in barrier-island formation and thus serves as a foundation for future investigations of barrier development in response to backbarrier infilling.

Massachusetts↗

USGS2015

Late Holocene sea- and land-level change on the U.S. southeastern Atlantic Coast

Late Holocene relative sea-level (RSL) reconstructions can be used to estimate rates of land-level (subsidence or uplift) change and therefore to modify global sea-level projections for regional conditions. These reconstructions also provide the long-term benchmark against which modern trends are compared and an opportunity to understand the response of sea level to past climate variability. To address a spatial absence of late Holocene data in Florida and Georgia, we reconstructed ~ 1.3 m of RSL rise in northeastern Florida (USA) during the past ~ 2600 years using plant remains and foraminifera in a dated core of high salt-marsh sediment. The reconstruction was fused with tide-gauge data from nearby Fernandina Beach, which measured 1.91 ± 0.26 mm/year of RSL rise since 1900 CE. The average rate of RSL rise prior to 1800 CE was 0.41 ± 0.08 mm/year. Assuming negligible change in global mean sea level from meltwater input/removal and thermal expansion/contraction, this sea-level history approximates net land-level (subsidence and geoid) change, principally from glacio-isostatic adjustment. Historic rates of rise commenced at 1850–1890 CE and it is virtually certain ( P = 0.99) that the average rate of 20th century RSL rise in northeastern Florida was faster than during any of the preceding 26 centuries. The linearity of RSL rise in Florida is in contrast to the variability reconstructed at sites further north on the U.S. Atlantic coast and may suggest a role for ocean dynamic effects in explaining these more variable RSL reconstructions. Comparison of the difference between reconstructed rates of late Holocene RSL rise and historic trends measured by tide gauges indicates that 20th century sea-level trends along the U.S. Atlantic coast were not dominated by the characteristic spatial fingerprint of melting of the Greenland Ice Sheet.

Florida↗

USGS1996

Character, paleoenvironment, rate of accumulation, and evidence for seismic triggering of Holocene turbidites, Canada Abyssal Plain, Arctic Ocean

Four box cores and one piston core show that Holocene sedimentation on the southern Canada Abyssal Plain for the last 8010 ± 120 yr has consisted of a continuing rain of pelagic organic and ice-rafted clastic sediment with a net accumulation rate during the late Holocene of ⩽10 mm/1000 yr, and episodically emplaced turbidites 1–5 m thick deposited at intervals of 830 to 3450 yr (average 2000 yr). The average net accumulation rate of the mixed sequence of turbidites and thin pelagite interbeds in the cores is about 1.2 m/1000 yr. Physiography suggests that the turbidites originated on the Mackenzie Delta or its clinoform, and δ 13 C values of −27 to −25%. in the turbidites are compatible with a provenance on a delta. Extant displaced neritic and lower slope to basin plain calcareous benthic foraminifers coexist in the turbidite units. Their joint occurence indicates that the turbidites originated on the modern continental shelf and entrained sediment from the slope and rise enroute to their final resting place on the Canada Abyssal Plain. The presence of Middle Pleistocene diatoms in the turbidites suggests, in addition, that the turbidites may have originated in shallow submarine slides beneath the upper slope or outer shelf. Small but consistent differences in organic carbon content and δ 13 C values between the turbidite units suggest that they did not share an identical provenance, which is at least compatible with an origin in slope failures. The primary provenance of the ice-rafted component of the pelagic beds was the glaciated terrane of northwestern Canada; and the provenance of the turbidite units was Pleistocene and Holocene sedimentary deposits on the outer continental shelf and upper slope of the Mackenzie Delta. Largely local derivation of the sediment of the Canada Abyssal Plain indicates that sediment accumulation rates in the Arctic Ocean are valid only for regions with similar depositional sources and processes, and that these rates cannot be extrapolated regionally. The location of an elliptical zone of active seismicity over the inferred provenance of the turbidites suggests that they were triggered by large earthquakes. Distal turbidite sediment accumulation rates were more than two orders of magnitude greater than pelagic sediment accumulation rates on the Canada Abyssal Plain during the last 8000 years. This disparity reconciles the discrepancy between the high accumulation rates assumed by some for the Arctic Ocean because of the numerous major rivers and large ice sheets that discharge into this small mediterranean basin and the low pelagic sedimentation rates that have been reported from the Arctic Ocean.

Marine Geology↗

USGS2007

The Yellowstone hotspot, Greater Yellowstone ecosystem, and human geography

Active geologic processes associated with the Yellowstone hotspot are fundamental in shaping the landscapes of the greater Yellowstone ecosystem (GYE), a high volcanic plateau flanked by a crescent of still higher mountainous terrain. The processes associated with the Yellowstone hotspot are volcanism, faulting, and uplift and are observed in the geology at the surface. We attribute the driving forces responsible for the northeastward progression of these processes to a thermal plume rising through the Earth’s mantle into the base of the southwest-moving North American plate. This progression began 16 million years ago (Ma) near the Nevada-Oregon border and arrived at Yellowstone about 2 Ma. Before arrival of the hotspot, an older landscape existed, particularly mountains created during the Laramide orogeny about 70–50 Ma and volcanic terrain formed by Absaroka andesitic volcanism mostly between 50–45 Ma. These landscapes were more muted than the present, hotspot-modified landscape because the Laramide-age mountains had worn down and an erosion surface of low relief had developed on the Absaroka volcanic terrain. The Yellowstone Plateau was built by hotspot volcanism of rhyolitic lavas and caldera-forming rhyolite tuffs (ignimbrites). Streams eroding back into the edges of this plateau have created scenic waterfalls and canyons such as the Grand Canyon of the Yellowstone and Lewis Canyon. Rhyolite is poor in plant nutrients and forms sandy, well-drained soils that support the monotonous, fire-adapted lodgepole pine forests of the Yellowstone Plateau. Non-rhyolitic rocks surround this plateau and sustain more varied vegetation, including spruce, fir, and whitebark pine forests broken by grassy meadows. Heat from the hotspot rises upward and drives Yellowstone’s famed geysers, hot springs, and mudpots. These thermal waters are home to specialized, primitive ecosystems, rich in algae and bacteria. The rock alteration associated with hydrothermal systems creates the bright colors of Yellowstone’s Grand Canyon. Basin-and-range-style faulting has accompanied migration of the hotspot to Yellowstone and formed the linear mountains and valleys that occur north and south of the hotspot track, which is the present-day eastern Snake River Plain. High rates of basin-and-range faulting occurred adjacent to the migrating Yellowstone hotspot, creating distinctive landscapes within the GYE such as the Teton Range/Jackson Hole, with characteristic rugged, forested ranges and adjacent flat-floored grassy valleys. The difference in altitude between the mountains and valleys provides a topographic gradient in which vegetation maturation advances with altitude; animal-migration patterns also follow this trend. The valleys provide natural meadows, agricultural land, town sites, and corridors for roads. Uplift of the GYE by as much as 1 km (3,000 ft) during the last 5 million years has resulted in ongoing erosion of deep, steep-walled valleys. Many prominent ecological characteristics of Yellowstone derive from this hotspot-induced uplift, including the moderate- to high- altitude terrain and associated cool temperatures and deep snowfall. Modern and Pleistocene climate and associated vegetation patterns strongly relate to the topography created by the hotspot and its track along the eastern Snake River Plain. Winter air masses from the moist northern Pacific Ocean traverse the topographic low of the Snake River Plain to where orographic rise onto the Yellowstone Plateau and adjacent mountains produces deep snow. A winter precipitation shadow forms on the lee (eastern) sides of the GYE. During Pleistocene glacial times, this moisture conduit provided by the hotspot-track-produced ice-age glaciers that covered the core of the present GYE. These glaciers sculpted bedrock and produced glacial moraines that are both forested and unforested, sand and gravel of ice-marginal streams and outwash gravels that are commonly covered with sagebrush-grassland, and silty lake sediments that are commonly covered by lush grassland such as Hayden Valley. The effects of the Yellowstone hotspot also profoundly shaped the human history in the GYE. Uplift associated with the hotspot elevates the GYE to form the Continental Divide, and streams drain radially outward like spokes from a hub. Inhabitants of the GYE 12,000–10,000 years ago, as well as more recent inhabitants, followed the seasonal green-up of plants and migrating animals up into the mountain areas. During European immigration, people settled around Yellowstone in the lower parts of the drainages and established roads, irrigation systems, and cultural associations. The core Yellowstone highland is too harsh for agriculture and inhospitable to people in the winter. Beyond this core, urban and rural communities exist in valleys and are separated by upland areas. The partitioning inhibits any physical connection of communities, which in turn complicates pursuit of common interests across the whole GYE. Settlements thus geographically isolated evolved as diverse, independent communities

Idaho, Montana, Utah, Wyoming↗

USGS1991

Shoreline deposits and diagenesis resulting from two Late Pleistocene highstands near +5 and +6 metres, Durban, South Africa

In exposures of Pleistocene rocks on the east coast of South Africa, eight sedimentary facies were distinguished on the basis of petrology, grain size, internal structures and field relationships. These are interpreted as deposits of surf zone, breaker zone, swash zone, backbeach, boulder beach and dune environments. Three phases of deposition and diagenesis are recognized. As a result of the stabilising effect of pre-existing coastal facies, the deposits from successive sea level stands are stacked vertically in a narrow coast-normal strip. Early cementation prevented erosion of the deposits during subsequent transgressions. Deposition of subsequent facies took place on an existing coastal dune (Facies 1). A terrace was cut into this dune at a sea level 4.5 to 5 m above present. At this sea level, clastic shoreline sediments were deposited which make up the main sedimentary sequence exposed (Facies 2–7). The steep swash zone, coarse grain size, and comparison with modern conditions in the study area indicate clastic deposition on a high-energy, wave-dominated, microtidal coastline. Vertical stacking of progressively shallower water facies indicates progradation associated with slightly regressive conditions, prior to stranding of the succession above sea level. During a subsequent transgression to 5.5 or 6 m above present sea level, a second terrace was cut across the existing facies, which by then were partly lithified. A boulder beach (Facies 8) deposited on this terrace is indicative of high wave energy and a rocky coastline, formed by existing cemented coastal facies. Comparison with dated deposits from other parts of the South African coast suggest a Late Pleistocene age for Facies 2–8. Deposition was terminated by subsequent regression and continuing low sea levels during the remainder of the Pleistocene. Cementation of the facies took place almost entirely by carbonate precipitation. The presence of isopachous fibrous cements suggests early cementation of Facies 1, 2, 3 and 4 under marine conditions, initially as aragonite which has since inverted to calcite. Facies 5, 6 and 7 are cemented only by equant calcite spar, evidence of cementation in the meteoric phreatic and vadose zones. Lowering of the water table during regression caused the remaining pore space in Facies 1, 2, 3 and 4 to be filled with equant calcite spar. Decementation in a 130 cm wide zone is attributed to water table shifts associated with the later transgression which deposited Facies 8. The vertical stacking of the two depositional sequences may be attributed to rapid cementation of Facies 2, 3, 4, 5, 6 and 7 under humid, subtropical conditions. This lithified sequence then acted as a focus for deposition of coarse-grained shoreline facies (Facies 8) during the subsequent transgression.

Marine Geology↗

USGS1963

Two pollen diagrams from southeastern Minnesota: Problems in the regional late-glacial and postglacial vegetational history

Kirchner Marsh and Lake Carlson are located 3 miles apart in Dakota County about 15 miles south of Minneapolis in the St. Croix moraine, which was formed by the Superior lobe during the Gary phase of the Wisconsin glaciation. During the Mankato phase that followed, the Des Moines lobe advanced to within a few miles of the sites. The region today is in a mixed-oak forest, with a maplebasswood forest 15 miles to the west and a re-entrant of the prairie on the sand plain south of the moraine. The general limit of coniferous trees is about 50 miles northeast of the sites, although outliers, especially of Pinus strobus, may be found along the Mississippi Valley a few miles to the east. One sediment core 12-13 m long from each site was analyzed for pollen content at 5-25-cm intervals. Diagrams based on percentage of total pollen (trees, shrubs, wind-pollinated herbs) show essentially identical sequences at the two sites, starting with the late-glacial phase of ice retreat. The diagrams have been subdivided into pollen zones according to the A-B-C sequence introduced by Deevey for New England. The late-glacial pollen record starts at Kirchner Marsh with a short Picea-Cyperaceae-Gramineae phase (Zone K), believed to represent a spruce parkland. Its C-14 date of 13,270 BP and the stratigraphy indicate a pre- Two Creeks and post- Gary correlation. Apparently the Kirchner site did not become established as a lake until this time owing to persistence of dead ice in the moraine. The absence of pollen of specific tundra indicators and the presence of pollen of such thermophilous plants as Fraxinus, Quercus, Corylus, Ambrosia, Humulus, and Typha latifolia imply that the climate was cool rather than cold. Zone A-a, which follows, correlates with the Two Creeks interstade. It is marked by the dominance of Picea, with appreciable percentages of Fraxinus and Ambrosia and with minor amounts of other thermophilous plants and the normal boreal associates of spruce like Betula, Larix, and Salix. Zone A-b, starting 12,050 C-14 years ago, correlates with the Valders ice advance. It is represented at both Kirchner and Carlson and shows the withdrawal of Fraxinus and Ambrosia and the slight rise of Artemisia. Except for the absence of pine in the late-glacial assemblage the vegetation implied by these three zones seems to have its closest modern counterpart in the southern fringe of the Boreal Forest of the Riding Mountain region of southwest Manitoba. It is concluded that pine did not migrate southward with the spruce during the Wisconsin glaciation, at least in the western Great Lakes region, and was thus eliminated from this region. During the lateglacial phases of ice retreat, herbs and spruce pioneered on the deglaciated terrain; pine did not follow until the destruction of the spruce forest at the end of the late-glacial phase. Zone B introduces postglacial time. It represents the time of rapid Vegetational succession following the deterioration of the spruce forest. Simultaneous maxima of Betula, Alnus, Fraxinus, and Abies occurred 10,230 years ago at Kirchner Marsh. These were followed rapidly by a Pinus maximum and then a rise of Ulmus, Quercus, and other deciduous types, dated as 9300 years ago at the correlative site of Madeha. This succession may represent differential rates of migration from refuges south and east of Minnesota . Deciduous trees dominate the C Zones. Zone C-a shows Ulmus and Ostrya /Carpinus followed by Quercus; it probably represents principally a mesic maple-basswood forest changing to oak. Zone C-b represents the advance of prairie into the region at the expense of the oak woodland or savanna. The large and abrupt fluctuations in the curves for Ambrosia-type and Chenopodiineae, especially at the Carlson site, may record encroachment of annual weeds onto intermittently dried lake bottoms. C-14 dates place Zone C-b between 7100 and 5100 years ago. In Zone C-c the Quercus again dominates until the abrupt increase in Ambrosiatype and Chenopodiineae that marks the time of forest clearance and land settlement 50-75 years ago.

Minnesota↗

USGS2000

Hydrologic budget of the late Oligocene Lake Creede and the evolution of the upper Rio Grande drainage system

The filling history, hydrologic budget, and geomorphic development of ancient Lake Creede and its tributary basin are evaluated to determine the factors that controlled its character. The lake filled the Creede caldera that formed in the late Oligocene as a consequence of the eruption of the Snowshoe Mountain Tuff. The caldera's sedimentary fill accumlated to a depth of about 1.26 km and had a volume of about 89 km 3 . The highest lake level was ~3300 m (10,800 ft) present altitude before it drained eastward across a broad volcanic plateau as the ancestral Rio Grande. A tributary canyon several hundred meters deep was cut into hard rhyolite in the north wall of the caldera before the lake was more than half full; its presence demonstrates that ancient Lake Creede filled slowly and thus occupied a long-lived, closed basin. The slow filling rate is incompatible with the present water flux through the Creede caldera basin, because such a flow would fill the basin geologically instantaneously. This mismatch, together with the recognition that the Oligocene climate was similar to that of today, forces the reexamination of the hydrologic and geomorphic history of the caldera. That appraisal shows that the caldera cannot have resurged rapidly immediately after caldera collapse, and that ancient watershed must have been lass than half as large as the present upper Rio Grande basin. The ancient lake had a more or less constant surface area of about 200 km 2 that approximated a steady-state condition between inflow and evaporation. Although the lake level fluctuated with climatic variations, its surface elevation steadily climbed as sediment accumulated, accelerating as resurgance and dome growth usurped spacewithin the basin. It could have had one playa stage early in its development and another after the basin had nearly filled with sediment, but there is no direct evidence for either. At least the lower half of the sedimentary column (the part sampled by the scientific drilling) formed in an euxinic environment. This argues against a persistent early playa, although evaporative accumulation of brine was inevitable. When the rate of resurgance was rapid relative to sedimentary infilling, the lake would have been deep (i.e., bordered by bedrock rather than sedimentary fans). The geomorphic evolution of the Creede caldera and its watershed tracks a two-phase topographic history, the first the Oligocene through Miocene, and the second for Pliocene to the recent. In Oligocene time, the San Juan volcanic field was a hydrologically immature, gently undulating, and outward sloping, constructional volcanic plateau straddling the ancient Continental Divide. West of the Creede caldera, a dendritic drainage discharged northeastward into ancestral Cebolla Creek (a tributary of the ancestral Gunnison River) through an early stage of the Clear Creek graben in the vicinity of Spring Creek Pass. Miocene basalt choked, but did not reconstruct, the drainage. By the end of Miocene time a mature topography of moderate relief developed, exposing some of the higher ores in the Creede district to weathering. In the late Miocene-early Pliocene time the San Juan Mountains were uplifted and titled eastward; the ancestral Rio Grande was revitalized and cut deeply into the older terrain, excavating much of the accessible sediment from the moat of the Creede caldera and exposing successively lowe levels in the Creede district to oxidation. Simultaneously, the southeast end of the Clear Creek graben was reactivated and breached the southwest wall of the Creede caldera. The rejuvenated Rio Grande captured the formerly northeast-directed headwaters of ancestral Cebolla Creek, shifting more than 1000 km 2 from the Pacific-directed drainage to the Atlantic. The water budget for ancient Lake Creede was strictly limited by the early stages of the fist geomorphic cycle; the modern water budget is the product of the second cycle.

Colorado↗

USGS2018

Promoting synergy in the innovative use of environmental data—Workshop summary

From December 2 to 4, 2015, NatureServe and the U.S. Geological Survey organized and hosted a biodiversity and ecological informatics workshop at the U.S. Department of the Interior in Washington, D.C. The workshop objective was to identify user-driven future directions and areas of collaboration in advanced applications of environmental data applied to forecasting and decision making for the sustainability of biodiversity and ecosystem services. Substantial effort to recruit attendees from diverse Federal, State, and private sector organizations successfully attracted participants from 20 Federal agencies and 48 different institutions in the academic, nonprofit, State government, and commercial sectors; the total number of attendees ranged from 100 to 144 during the 3-day workshop. The first one-half of the workshop was divided into 7 plenary sessions and 3 sets of lightning talk sessions organized by sector, providing 48 oral and visual plenary presentations that shared diverse perspectives on biodiversity and ecological informatics, including original biospatial analyses from 6 graduate student map contest winners. The second one-half of the workshop focused on 10 breakout sessions with participant-driven themes from the environmental data sphere and concluded with an address by the Director of the U.S. Fish and Wildlife Service. The workshop was structured to encourage interactivity. About 80–90 percent of attendees provided direct feedback using clicker devices for specific questions related to biodiversity and ecological data uses and needs, and 10 breakout session leaders shared the highlights of their group discussions during the final workshop plenary sessions. Participants were encouraged to use the Twitter hashtag #ShareUrData. Over lunch on day 2 there were 20 simultaneous presentations of tools and apps during a special “Tools Café” session. The 10 participant-defined breakout session topics are listed below: Ecosystem services and ecological indicators Inventory and monitoring Biogeographic map of the Nation Pollinators Invasive species Remote sensing Drivers of agricultural change Citizen science Climate Hydrology and watersheds Numerous common themes that emerged from the workshop include the following: The vital importance of completing foundational environmental datasets that are nationally consistent and are essential to multiple sectors, such as the Soil Survey Geographic database high-resolution soils data, a minimum 5-meter resolution digital elevation model, national hydrographic data, high-resolution land cover data, time series high-resolution spatial climate data from historical to future time steps, and a national wetland inventory. Improved, nationally consistent environmental datasets (integrated with targeted observations) will dramatically advance forecasting capacity and support early warning systems (that is, drought, forest disease); however, multiagency coordination should focus on decision support tools that convey appropriate actions and responses to adapt to, and mitigate, potential negative consequences. Digitizing and providing access to the vast stores of underused historical data that can be leveraged for this purpose is of national importance. Modern computational techniques and the ever-increasing flow of environmental data from ground and remote observations can support improved understanding of environmental change. Success of understanding patterns of change for decision making requires establishing baselines from which change can be measured. The value of digitized historical data is greater than ever before. There is a need to recognize the multifaceted potential of citizen science to engage the public in resource stewardship, to create the next generation of science, technology, engineering, math, and environmental leaders, and to have sufficient field personnel to monitor environmental trends, including early detection of alien invasive species, phenological shifts, shifting distribution and abundance of indicator species, and species inventories. The Federal government has an essential role in creating the infrastructure to dramatically improve mobilization of citizen science (and other) data by fostering the following: creation of data standards, creation of nationally consistent framework datasets, vertical integration of observation data, visualization and dissemination of aggregated datasets, and calculation and communication of derived trends. Current and near future trends in the availability of remotely sensed data (rapid expansion of satellite fleets and drones) is revolutionizing access to near-real-time ecological data. Targeted integration with ground-based observations and instrumentation has an extremely valuable role in validating remotely sensed data, filling data gaps, improving data quality, and fully realizing the potential of the near-real-time monitoring of environmental indicator trends. Integrated management of environmental data at the landscape scale is required even as specific actions on the ground are largely local in nature. The workshop highlighted numerous success stories; however, almost every breakout group pointed out the still-too-fragmented nature of the current data landscape. Management and delivery of the necessary data, tools, and analyses to sustain our Nation’s environmental capital must be a collaborative effort between Federal, State, and local governments, academia, nonprofits, and the commercial sector, even though the responsibilities of each sector are different.

Open-File Report↗

USGS1973

Geology and mineral resources of central Antioquia Department (Zone IIA), Colombia

This report summarizes the geology of an area of some 6000 square kilometers in the northern part of the Central Cordillera of the Colombian Andes. The area, in north-central Department of Antioquia, was mapped between 1964 and 1968 as part of the Inventario Minero Nacional (IMN) project. Mineral resources are summarized within a larger area, designated as subzone ILK of IMN Zone If, which comprises almost 22,000 sq. kin, including the area mapped geologically by IMN and additional areas mapped by other agencies. The oldest formation is a micaceous paragneiss of early Paleozoic or possibly late Precambrian age. A thick geosynclinal sedimentary series accumulated during the Paleozoic Era and became regionally metamorphosed to greenschist (locally amphibolite) facies during the Permian or early Triassic; these schists and gneisses are designated collectively as the Valdivia Group. The Permian(?) orogenic episode included intrusion of concordant syntectonic plutons, mostly of tonalitic composition. Rocks of unequivocal Triassic or Jurassic age are not recognized. The Cretaceous is well represented by both igneous and sedimentary assemblages. Eugeosynclinal alpine ophiolites comprising submarine basalt flows and numerous intrusions of gabbro and serpentinite are prominent in the Lower Cretaceous, together with flysch composed of marine shale and lesser sandstone and conglomerate. The Upper Cretaceous is represented along the west border of the mapped area by submarine basalt flows and pyroclastic rocks, locally Interbedded with fine-grained clastic sedimentary beds, and lenses of dark laminated chert, at least part of which is radiolarian. The Late Cretaceous was marked by an orogenic event that profoundly folded and faulted all rocks and in the Central Cordillera caused low-grade metamorphism, the overprint of which is hardly observable in pre-Cretaceous rocks elsewhere. The Late Cretaceous orogeny culminated with discordant intrusion of the epizonal tonalitic Antioquian batholith. Displacement along the great Romeral wrench fault may have begun in the Cretaceous. Plutonism continued into the Cenozoic, exemplified by the hornblende-diorite Sabanalarga pluton. Intermontane basins were filled with molasse derived from the erosion of adjacent highlands; Tertiary sedimentation in marshy areas included organic carboniferous matter subsequently converted to lignite or subbituminous coal. The Sabanalarga fault system originated in the Late Tertiary; intermittent displacement continued on the older wrench faults such as the Romeral. Epeirogenic uplift, which probably began in the Pliocene and continued through the Pleistocene and Holocene, brought on renewed erosion which has sculptured the mountains into their present form. Mineral resources in subzone IIA are varied but not of outstanding importance. Gold and silver mining, significant in past centuries, is minor today. Ferruginous laterite on serpentinite once considered as a potential source of iron ore is not economically exploitable. IMN has explored nickeliferous laterite at the extreme northwest corner of subzone IIA; this is a potential resource, exploitable only after exhaustion of the larger and richer nickel laterite deposit at Cerro Matoso, farther to the north and outside the boundaries of Zone If. Known deposits of mercury, chromium, manganese, and copper are small, with limited economic potential. Nonmetallic resources include raw materials for cement, including portland cement. Saprolite clay is widely used in making common red brick and tile, still a dominant construction material in all but the most modern multistory buildings. Aggregate materials are varied and abundant. Kaolin of good quality near La Union is important as a ceramic raw mineral filler. Tertiary subbituminous coal beds are an important energy resource in western subzone IIA, and have a good potential for greater development. Deposits of sodic feldspar, talc, decorative stone, and silica a

Open-File Report↗

USGS2025

Insights and strategic opportunities from the USGS 2024 Per- and Polyfluoroalkyl Substances (PFAS) Interagency Workshop

Introduction In 2021, the U.S. Geological Survey (USGS) published Circular 1490 titled, “Integrated Science for the Study of Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS) in the Environment: A Strategic Science Vision for the U.S. Geological Survey” (Tokranov and others, 2021). Circular 1490 was created to be a resource for USGS scientists prioritizing and planning research related to per- and polyfluoroalkyl substances (PFAS) and to be a guide for developing partnerships with other scientists, State and Federal agencies, and stakeholders engaged in PFAS research and management and mitigation of the environmental and human-health effects of PFAS. This USGS PFAS Strategic Science Vision document was intended to be the foundation for a “living strategic vision,” periodically providing updates on the state of USGS PFAS research, emerging PFAS data gaps and needs, and progress on interagency and stakeholder PFAS partnerships and priorities. To meet this objective, the USGS planned to host an Interagency and Stakeholder PFAS Workshop every 2–3 years. During September 10–12, 2024, the USGS hosted the first Interagency and Stakeholder PFAS Workshop in Reston, Virginia. The Workshop brought together experts from other Federal agencies (U.S. Environmental Protection Agency, National Institute of Environmental Health Sciences, Food and Drug Administration, Department of Defense [Air Force, Army]), State agencies (Washington Fish and Wildlife, Virginia Department of Transportation), and academia (Harvard University, University of Maryland) to address key challenges relating to the measurement and modeling of PFAS and the implications for environmental health. Participants engaged in in-depth discussions centered around six pivotal topics related to PFAS: (1) sampling protocols, methods and interpretation; (2) environmental sources, source apportionment, and occurrence; (3) environmental fate and transport; (4) human and wildlife exposure routes and risk; (5) bioconcentration, bioaccumulation, and biomagnification; and (6) ecotoxicology and effects. Each topic had three breakout sessions. A recurrent theme of workshop discussions was how data on a nationwide scale for PFAS occurrence in various environmental matrices, including air, water, food crops, biota, soil, and streambed sediment could help to advance scientific understanding. Participants noted significant geospatial data gaps, particularly in the midwestern and southern United States and the Pacific Northwest. PFAS data collection tends to be more robust along the eastern seaboard and in California. Participants stressed how enhancing the integration of large and small datasets across various agencies could help to support national scale understanding of PFAS. To address these gaps, attendees suggested leveraging datasets from Federal entities like the USGS and the U.S. Department of Defense, State agencies, and municipal utility services to develop predictive contaminant detection and transport models. Improved coordination between water quality programs and USGS research could help to facilitate access to valuable data, leading to comprehensive databases that inform PFAS point (wastewater treatment plants and landfills) and nonpoint (runoff from land, atmospheric deposition, food packaging) sources, environmental transport mechanisms, environmental detection and concentrations, potential exposure routes, and health effects on different biota, including humans. A specific request was made to develop a map demarking the depth of modern (1953 or later) groundwater, which is susceptible to surface-derived anthropogenic (that is, human-made) contamination, based on tritium-age dating. Emphasis was placed on incorporation of hydrology, groundwater flow paths, groundwater–surface water interactions, and landscape factors in predictive statistical models as a step to improve contaminant source identification and tracking. Molecular fingerprinting approaches garnered attention as techniques to link specific PFAS mixtures detected in a sample to environmental sources and levels in biota (Dávila-Santiago and others, 2022). Integrating data from abiotic (that is, water, soil, and air) and biotic (that is, living organisms) systems identified as a research opportunity. For example, understanding the composition of soils and sediments, which include a mixture of mineral, plant, and animal components, could advance understanding of exposure pathways. The discussions highlighted opportunities to explore and understand the potential redistribution and biotic exposures of PFAS from biosolid and wastewater treatment plant effluent land application practices, in addition to atmospheric releases and discharges from landfill and wastewater treatment plants. Participants identified research gaps surrounding how these sources may contribute to contamination and may affect surrounding ecosystems, including a better definition of anthropogenic background concentrations. Moving forward, the collection of co-occurrence data was noted as a means to improve understanding of complex mixtures and to leverage companion modeling efforts focused on areas with high and low contamination levels to identify areas of concern and unaffected resources. Participants emphasized how centralized USGS databases and the establishment of sample-metadata archives can help to ensure that samples are preserved and accessible for future research. In conclusion, the workshop participants identified opportunities to bridge data gaps and improve measurement techniques, modeling frameworks, databases, and communication, to enhance the understanding of PFAS and their effects on environmental and human health. Upon completion of the workshop, participants indicated an interest in developing strategic data collection, modeling, and analytical approaches to address these challenges.

Open-File Report↗