USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of the Mechanics and Physics of Solids”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,706 records · Page 58Linked to original sources
USGS2024

Probabilistic assessment of postfire debris-flow inundation in response to forecast rainfall

Communities downstream of burned steep lands face increases in debris-flow hazards due to fire effects on soil and vegetation. Rapid postfire hazard assessments have traditionally focused on quantifying spatial variations in debris-flow likelihood and volume in response to design rainstorms. However, a methodology that provides estimates of debris-flow inundation downstream of burned areas based on forecast rainfall would provide decision-makers with information that directly addresses the potential for downstream impacts. We introduce a framework that integrates a 24 h lead-time ensemble precipitation forecast with debris-flow likelihood, volume, and runout models to produce probabilistic maps of debris-flow inundation. We applied this framework to simulate debris-flow inundation associated with the 9 January 2018 debris-flow event in Montecito, California, USA. When the observed debris-flow volumes were used to drive the probabilistic forecast model, analysis of the simulated inundation probabilities demonstrates that the model is both reliable and sharp. In the fully predictive model, however, in which debris-flow likelihood and volume were computed from the atmospheric model ensemble's predictions of peak 15 min rainfall intensity, I 15 , the model generally under-forecasted the inundation area. The observed peak I 15 lies in the upper tail of the atmospheric model ensemble spread; thus a large fraction of ensemble members forecast lower I 15 than observed. Using these I 15 values as input to the inundation model resulted in lower-than-observed flow volumes which translated into under-forecasting of the inundation area. Even so, approximately 94 % of the observed inundated area was forecast to have an inundation probability greater than 1 %, demonstrating that the observed extent of inundation was generally captured within the range of outcomes predicted by the model. Sensitivity analyses indicate that debris-flow volume and two parameters associated with debris-flow mobility exert significant influence on inundation predictions, but reducing uncertainty in postfire debris-flow volume predictions will have the largest impact on reducing inundation outcome uncertainty. This study represents a first step toward a near-real-time hazard assessment product that includes probabilistic estimates of debris-flow inundation and provides guidance for future improvements to this and similar model frameworks by identifying key sources of uncertainty.

California↗
USGS2025

Earthquake magnitude and source parameter estimation with a distributed acoustic sensing dataset in the Gorda subduction zone

Distributed acoustic sensing (DAS) systems offer a cost‐effective way to create large‐scale strainmeter arrays for seismological applications using fiber‐optic cables. DAS‐based strain measurements are known to be influenced by various factors, bringing into question their general reliability for accurate earthquake characterization. A 15‐km‐long DAS deployment in northern California was operational within 3 days of the 2022 M w 6.4 Ferndale earthquake and ran continuously throughout the aftershock sequence. We utilize these aftershock data to validate DAS‐based strain measurements in two ways. We first test the accuracy of DAS‐based magnitude estimates from peak dynamic strains by comparing them with magnitude and attenuation scaling relations derived independently from traditional borehole strainmeter (BSM) data. We demonstrate that DAS‐based magnitudes are comparable to BSM‐based magnitudes when corrections for variations in site response along the fiber‐optic cable are properly made. Magnitude errors are spatially correlated, potentially because of factors such as finite‐fault effects (e.g., stress drop) or more complex, unmodeled path attenuation or because of wave propagation effects in heterogeneous media. We then apply more advanced source characterization methodology to the DAS data using a time‐domain empirical Green’s function (EGF) deconvolution approach to measure details of the moment rate history. The EGF approach using DAS data depends on careful treatment of distorting factors such as anthropogenic sources of noise and optical phase wrapping but successfully isolates source spectra for moderate‐magnitude earthquakes: source spectral ratios obtained from DAS data, broadband seismometer data, and BSM data in the same region show consistent results, revealing differences in directivity and spectral shape among earthquakes. Although further research is needed to refine source‐time‐function estimation techniques for DAS data, particularly for larger magnitude events, these case studies demonstrate the clear potential of DAS for earthquake source characterization.

California↗
USGS2026

Using a temporary emigration model to estimate abundance of stream fishes from hybrid removal surveys with and without block nets

Monitoring programs are often faced with a decision to allocate resources into either robust spatiotemporal coverage to estimate a population index (e.g., not true abundance) or confirming closed sampling conditions (e.g., with block nets) for an unbiased population estimate at the cost of spatiotemporal coverage. However, making accurate and precise abundance estimates at robust spatiotemporal scales is possible when combining open and closed sampling designs with integrated modeling techniques. We used simulations and a case study of backpack electrofishing surveys in the Santa Ana River, California to test the efficacy of an integrated abundance model (temporary emigration model, TE) to estimate abundance of fishes using removal sampling methods with a hybrid sampling design (sampling with and without block nets during removal sampling). We found that the TE model performed well under most modeling scenarios (sample size, amount of closure violation, number of samples collected during closure), although at least a few samples with block nets were necessary for all parameters to be estimable. When applied to fish surveys in the Santa Ana River, we found that catch of the fishes fit to the TE model (Santa Ana Sucker, Arroyo Chub, Channel Catfish, Largemouth Bass, Yellow Bullhead) showed little evidence that the closure assumption was violated when block nets were not used. Additionally, we found that the abundance of non-native fishes negatively affected the abundance of the native Santa Ana Sucker, which was also found to adversely affect the native fish’s access to critical habitat consisting of gravel and cobble substrate. Our results indicate that the TE model presents a viable solution to common sampling problems that impact many monitoring programs, where precise and accurate population estimates can be made at large spatiotemporal scales even when most samples violate the closure assumption.

California↗
USGS2000

Quality assurance and analysis of water levels in wells on Pahute Mesa and vicinity, Nevada Test Site, Nye County, Nevada

Periodic and continual water-level data from 1963 to 1998 were compiled and quality assured for 65 observation wells on Pahute Mesa and vicinity, Nye County, Nevada. As part of the quality assurance of all water levels, ancillary data pertinent to computing hydraulic heads in wells were compiled and analyzed. Quality-assured water levels that were not necessarily in error but which did not represent static heads in the regional aquifer system, or required some other qualification, were flagged. Water levels flagged include those recovering from recent pumping or well construction, water levels affected by nuclear tests, and measurements affected by borehole deviations. A cursory examination of about 30 wells with available water-level and down-hole temperature data indicate that water levels in most wells on Pahute Mesa would not be significantly affected by temperature if corrected to 95 degrees Fahrenheit. Wells with large corrections (greater than 10 feet) are those with long water columns (greater than 1,500 feet of water above the assumed point of inflow) in combination with mean water-column temperatures exceeding 105 degrees Fahrenheit. Water-level fluctuations in wells on Pahute Mesa are caused by several factors including infiltration of precipitation, barometric pressure, Earth tides, ground-water pumpage, and seismic events caused by tectonic activity and underground nuclear testing. No observed water-level fluctuations were attributed to a naturally occurring earthquake. The magnitude and duration of changes in water levels caused by nuclear tests are affected by the test size and the distance from a well to the test. Identifying water levels that might be affected by past nuclear tests is difficult because pre-testing water-level data are sparse. Hydrologically significant trends were found in 13 of 25 wells with multiple years of water-level record. The largest change in water levels (1,029 feet in 25 years) occurred in well U-19v PS 1D as a result of the Almendro nuclear test. Likely explanations for trends in most of the wells are either changes in precipitation patterns that affect recharge rates to the ground-water system, pumping effects from water-supply well U-20 WW, or a combination of these two factors.

Nevada↗
USGS2024

Characteristics of the fault damage zone From high-resolution seismic imaging along the Palos Verdes Fault, California

The distribution and intensity of fault damage zones provides insight into fault activity and its relationship to fluid flow in the crust. Presently, measures of the in-situ distribution of fault damage remain limited and along-strike studies are rare. This study focuses on an offshore section Palos Verdes Fault damage zone that spans 28 km, near Los Angeles, California. To investigate the previously unresolved shallow (∼400 m below the seafloor) fault damage zone we use densely spaced (∼500 m line separation) newly collected sparker multichannel seismic lines and sub-bottom profiles. The combination of high-resolution acquisition methods and specialized seismic processing workflows provide improved imaging of shallow faulting. We apply a multi-trace similarity technique to identify discontinuities in the seismic data that may be attributed to faults and fractures. This fault detection approach reveals diverse fault damage patterns on adjacent seismic profiles. However, a discernible damage zone pattern emerges by stacking multiple damage detection profiles along strike. We find that peak damage identified in this way corresponds to the active main fault strand, confirmed in this study, and thus the technique may be useful for identifying active fault strands elsewhere. Additionally, we observe that the variable width of the damage zone along strike is controlled by fault obliquity. Furthermore, our observations reveal a correlation between fault damage and seafloor fluid seeps visible in the water column, suggesting that damage plays a role in controlling fluid flow around the fault.

California↗
USGS2023

Stream sediment geochemistry in mineral exploration: A review of fine-fraction, clay-fraction, bulk leach gold, heavy mineral concentrate and indicator mineral chemistry

Stream sediment surveys support early-stage reconnaissance mineral exploration and regional assessment programmes, enhanced by recent improvements in analytical method detection limits, continuously improving mineral chemistry, and new approaches to the interpretation of geochemical data. Sediment surveys may be used to predict catchment basin lithology, mineralization type based on pathfinder geochemistry, and geological features based on indicator mineral chemistry. Sediment surveys that target a finer-fraction sediment sample led to the discovery of the La Colosa gold deposit, Colombia. The Batu Hijau porphyry Cu–Au deposit in Indonesia was discovered based on an anomalous clay-sized fraction sample 12 km downstream. In an arid region with poorly developed drainages and minor topographic relief, the Ag-base-metal Navidad District in Argentina was discovered with clay-fraction sediment geochemistry. Heavy mineral concentrate (HMC) sediment surveys that include mineral chemistry determinations have led to global diamond discoveries. HMC surveys contributed to discovery of the Ring of Fire Ni–Cu–PGE and chromite district, Ontario, Canada. Discoveries and geochemical mapping can assist advancement of the application of stream sediment geochemistry in those global areas for which lithologies and deposits are exposed. Stream sediment surveys continue to be one of the most cost-effective geochemical methods for covering large areas for mineral exploration.

Geochemistry: Exploration, Environment, Analysis↗
USGS2025

Rupture process of the Mw7.0 December 5, 2024 Offshore Cape Mendocino earthquake

The Mw7.0 December 5, 2024 Offshore Cape Mendocino earthquake ruptured a km long portion of the east-west trending Mendocino fault zone (MFZ). In order to clarify the rupture process, we assemble three-component seismograms from regional seismic stations, horizontal coseismic displacement vectors derived from Global Navigation Satellite System (GNSS) time series, and a Sentinel-1 ascending interferogram. These data are interpreted with a model of slip distributed on two vertical fault planes representative of the eastern MFZ and spanning the ~70 km length of the aftershock zone. Assuming right-lateral strike slip, we find that the rupture initiates in the oceanic mantle at 20-30 km depth and proceeds unilaterally updip and toward the east. Early aftershocks locate adjacent to the peak slip areas, tracking the coseismic rupture propagation from oceanic mantle to shallower depth and implying a significant role of static stress transfer in driving aftershocks in an ocean plate environment.

California↗
USGS2025

Exploration for blind geothermal systems in the eastern Great Basin of Utah: An update on the “Lund North” INGENIOUS detailed study site

Existing geothermal production in Utah is commonly collocated with surficial expressions of geothermal heat including active hot springs and hot spring deposits. However, geothermal potential across the Great Basin region is thought to be much higher for hidden or blind geothermal systems. Accordingly, exploration techniques that can locate geothermal resources that lack surface thermal features could support future development of these systems. The goal of the INGENIOUS project is to reduce exploration risk and discover new, economically viable hidden geothermal systems in the Great Basin region. This paper summarizes the efforts and preliminary results of blind geothermal resource prospecting in Utah as part of the larger INGENIOUS project. The Lund North site in the Basin and Range province of southwest Utah was designated as the fourth detailed study site for the project. The site was initially identified from the preliminary Play Fairway Analysis (PFA) geothermal favorability map, which is based on various data elements, and the identification of favorable structural settings across Utah. This site contains existing legacy data including a thermal gradient borehole with a heat-flow value exceeding 220 mW/m 2 . New data collected at this site include terrestrial gravity, magnetotellurics, transient electromagnetics, fluid geochemistry, geologic mapping, UAV-based lidar, paleomagnetism, aeromagnetic surveys, and a shallow temperature survey. Preliminary data and model interpretations corroborate the presence of a large, east-dipping, northeast-southwest-trending normal fault on the edge of a typical Basin and Range graben. Quaternary fault mapping refined by high-resolution lidar surveys suggests a complex step over fault geometry. Utilizing multi-disciplinary datasets for further site assessment at Lund North will facilitate the development of a local-scale PFA and geothermal conceptual model. This new data will be used to site successive thermal gradient drilling to verify heat flow with temperatures at depth at the Lund North site and further investigate the existence of a local geothermal system.

Utah↗
USGS2025

A regional model comparison between MODPATH and MT3D of groundwater travel time distributions

Groundwater quality changes in wells and streams lag behind changes to land use due to groundwater travel times. Two contaminant transport methods were compared to assess differences in their simulated travel time distributions (TTDs) to streams and wells in the Wisconsin Central Sands. MODPATH simulates advective groundwater flow with particle tracking, while MT3D simulates age-mass using a finite difference solution without dispersion to allow for direct comparison of the two methods. MODPATH appropriately simulates groundwater TTDs from the water table to surface discharge but is subject to inaccuracies at weak-sink well cells due to the flow-model grid discretization and imprecise location of well discharge within well cells. MT3D better represents weak-sink well cells since it removes mass in proportion to the prescribed pumping rate, although travel time within well cells is neglected. Conversely, MT3D's treatment of surface water boundary cells is not as accurate as MODPATH because mass should be removed from the water table rather than the full cell volume. MT3D simulations of TTDs can also be confounded by the instantaneous vertical distribution of mass introduced throughout recharge cells instead of at the water table, which initiates mass along deeper flow paths. We evaluated 9 MODPATH and 13 MT3D implementations, generating differences in median travel times of up to 18 years. Both methods have strengths and weaknesses, with MT3D better representing weak-sink well cell behavior and MODPATH better representing surficial recharge and discharge. The effect of these characteristics on simulated TTDs, along with ideas for ameliorating method weaknesses, is discussed.

Wisconsin↗
USGS2026

Numerical modeling of Late Pleistocene to Holocene earthquake-induced progressive rock slope damage in the paraglacial Serpentine valley, Prince William Sound, Alaska

Landslides in deglaciating fjords pose a potential tsunami threat to nearby communities; however, processes contributing to long-term progressive rock damage and landslide conditioning remain poorly constrained in paraglacial settings. Here, we analyse the role of earthquake-induced rock mass damage over late Pleistocene to Holocene time scales, as a conditioning factor for modern landslides, using distinct element numerical modelling to assess spatial and temporal patterns of fracture propagation influenced by varying glacier thickness. Conceptualised numerical models were parameterised by in situ rock mass, glacial and topographic conditions in Serpentine valley, located in Prince William Sound, Alaska, where several large landslides are actively developing along the western valley wall. Results show that although rigid glacier buttressing reduces co-seismic rock mass damage, it does not suppress it completely, and damage occurs both above and below the glacier surface elevation. We demonstrate that topography, and especially steep slopes with topographic convexity, as well as preexisting damage of joint networks and faults inherited from tectonic and exhumation induced stresses, exert primary control on the location of new co-seismic damage. Simulations representing a simplified deglaciation sequence over the past 25 ka, with a series of 10 evenly spaced earthquakes, generated rock mass damage patterns that qualitatively match in situ landslide structural and kinematic observations at one instability in Serpentine valley. Our conceptual study helps clarify the role of repeated seismicity over glacial timescales as a long-term conditioning process for paraglacial rock slope failure, highlighting spatial and temporal patterns of progressive damage accumulation, with outcomes relevant for modern landslide hazard assessment.

Alaska↗
USGS2024

Site response in the Walnut Creek–Concord region of the San Francisco Bay, California: Ground motion amplification in a fault-bounded basin

Thirty‐seven portable accelerometers were deployed in the eastern San Francisco Bay communities of Walnut Creek and Concord to study site response in a fault‐bounded, urban, sedimentary basin. Local earthquakes were recorded for a period of two years from 2017 to 2019 resulting in 101 well‐recorded events. Site response is estimated by two methods: the reference site spectral ratio method and a source‐site spectral inversion method. The reference site spectral ratio method allows investigation of the variability of site amplification with source azimuth and frequency. The source‐site spectral inversion method yields the best least‐squares fit to site response for a database of ground‐motion records. Both methods show substantial amplification in the Walnut Creek–Concord basin below 2 Hz indicating strong surface‐wave development. Greater amplification is seen for sources aligned along the long axis of the basin. Inversion using close‐in sources at short distances yields lower amplification at longer periods than the entire data set due to reduced surface‐wave generation for steeper angles of incidence. Inversion of site response spectra for shallow shear‐wave velocity using a global search algorithm yields V S30 values consistent with generalized mapping results based on geology and topography but with greater variability due to local site variations. 3D finite‐element modeling shows greater amplification in the Walnut Creek–Concord basin with a basin‐edge effect likely contributing to higher ground motions. Topography is also seen to lead to increased scattering and shadowing effects.

California↗
USGS2025

Leveraging wildfire to augment forest management and amplify forest resilience

Successive catastrophic wildfire seasons in western North America have escalated the urgency around reducing fire risk to communities and ecosystems. In historically frequent-fire forests, fuel buildup as a result of fire exclusion is contributing to increased fire severity. The probability of high-severity fire can be reduced by active forest management that reduces fuels, prompting federal and state agencies to commit significant resources to increase the pace and scale of fuel reduction treatments. However, lower severity areas of wildfires also have the potential to act as “treatments,” and even catastrophic fires with large areas of high severity can still have substantial areas of lower severity fire that may be improving forest conditions locally. We quantified active management and wildfire severity across yellow pine and mixed conifer (YPMC) forests in the Sierra Nevada of California over a 22-year period (2001–2022). We did not detect increases in the area treated through time, but the area of beneficial wildfire (low to moderate severity) increased substantially, exceeding active treatment area in 8 of 22 years. Overall, beneficial wildfire treated ~17% more area than all treatments combined, and roughly four times more area than fire-related treatments alone. We then used disturbance history to evaluate resistance to high-severity wildfire and forest loss across the YPMC range. Of the 2.3 million ha YPMC of forests in 2001, 20% lost mature forests due to high-severity fire by 2022, which is nearly half of all YPMC area burned. Most of the landscape (47%) remains at risk of high-severity fire because it had no restorative disturbances, but 33% of the study area has some level of resistance to high-severity wildfire. In these areas, resistance will need to be enhanced and maintained over time via active management or managed wildfire, but these treatment needs will likely outpace capacity even under optimistic implementation scenarios. Given limited resources for implementing active management and the likelihood of a more fiery future, incorporating beneficial wildfire into landscape-level treatment planning has the potential to amplify the impact of active management treatments.

California, Nevada↗
USGS2025

Estimating the probability of export restrictions to inform mineral criticality

As demand for advanced technologies rises, mineral commodities will increase in geopolitical importance. To assess risks associated with mineral commodity supply chain disruptions, governmental agencies and others have developed "criticality" assessments, with criticality described using the economic impact and probability of supply chain disruptions. In previous work, subjective supply risk indicators were developed to approximate this probability, typically combining several factors such as supply diversity and political stability of trading partners, where indicator weightings can substantially impact results. This work explicitly quantifies trade barrier probability using an ensemble of several machine learning classifiers, with probability estimates informed by exogenous variables such as prior trade barrier implementation and global export dominance. Major differences in the high-probability countries and commodities are observed across models, but the ensemble method highlights Indonesia, China, Tanzania, and the United States as particularly high risk. This approach enables a direct, quantitative, objective approach to assessing trade barrier probability, enhancing risk identification and prioritization for policymakers.

SSRN↗
USGS2024

Investigation of land cover within wetland complexes at Dixie Meadows, Churchill County, Nevada, from October 2015 to January 2022

The U.S. Geological Survey investigated land cover at subannual time steps within six wetland areas in Dixie Valley, Churchill County, Nevada, from October 2015 to January 2022. As requested by the U.S. Fish and Wildlife Service, we used aerial photography and satellite remote sensing data to map surface water and other land cover types within the wetland complexes. We identified five land cover classes using the green normalized difference vegetation index (gNDVI) and its inverse relationship to the normalized difference water index (NDWI) within three U.S. Department of Agriculture National Agriculture Imagery Program aerial images (acquired in 2015, 2017, and 2019) and 110 European Space Agency Sentinel-2 satellite images (acquired 2015–2022). The relative wetness of soil conditions within each land cover class is estimated by comparison to previously published observations of relative conductivity measured by 79 field-based sensors within the wetlands from 2019 to 2021. We mapped the areal coverage of the five land cover classes for approximately 385 acres (1,559,000 square meters [m²]) comprising six individual wetland complexes as well as a larger 1,298- acre (5,254,000-m 2 ) area of interest inclusive of the wetland complexes and adjacent landscape. Land cover of open water (Class 5) primarily within ponds at one of the wetland complexes comprised 8,333 m 2 , on average, of the wetland complexes. Land cover of mixed shallow surface water, saturated soil, and vegetation (Class 4) comprised 111,723 m 2 on average of the wetland complexes. Land cover of dense green vegetation canopy cover (Class 3) that often (46 percent of observations) had underlying surface water or saturated soil conditions comprised 592,522 m 2 on average of the wetland complexes. The remaining areas of the wetland complexes not mapped as these three land cover types (Classes 2 and 1) had sparse vegetation or bare soil cover and commonly (greater than or equal to 67 percent of observations) had dry soil conditions. The investigation of land cover detailed in this report could inform future efforts to map land cover more precisely via higher resolution remote sensing or ground-based surveying or could be incorporated with other environmental monitoring data to characterize habitat and hydrology of the wetland complexes at Dixie Meadows.

Nevada↗
USGS2025

Projecting stream water quality using Weighted Regression on Time, Discharge, and Season (WRTDS): An example with drought conditions in the Delaware River Basin

Future water availability depends on understanding the responses of constituent concentrations to hydrologic change. Projecting future water quality remains a methodological challenge, particularly when using discrete observations with limited temporal resolution. This study introduces Weighted Regression on Time, Discharge, and Season for Projection (WRTDS-P), a novel, computationally efficient method that enables the projection of daily stream water quality under varying hydrologic conditions using commonly available discrete monitoring data. WRTDS-P model performance was validated using 39 sites in the Delaware River Basin (DRB) and four key constituents: specific conductance (SC), nitrate (NO 3 − ), magnesium (Mg 2+ ) and calcium (Ca 2+ ). Projections were tested against holdout data from the final 1 to 5 years of each time series, demonstrating robust predictive capability, with median Nash-Sutcliffe efficiencies of 0.67 for SC, 0.56 for NO 3 − , 0.65 for Ca 2+ , and 0.79 for Mg 2+ . Model uncertainty was correlated with indicators of hydrologic or geochemical mass-sinks, such as groundwater storage and adsorption in wetland soils. Drought scenario analyses for SC used ranges of reduced discharge including flows from the 1965 drought of record. Scenarios predicted widespread increases of SC, especially in southern DRB streams where baseline SC levels are already elevated. Fractional increases of SC were more uniformly distributed, indicating potential risk to sensitive ecosystems. Notably, drought-induced SC increases were positively correlated with interannual SC trends, indicating that hydrologic extremes could exacerbate ongoing salinization. This work provides a transferable and interpretable framework for projecting future water quality and assessing hydrologic risk to water resources and aquatic ecosystems.

Delaware, New Jersey, New York, Pennsylvania↗
USGS2025

Base-flow sampling to enhance understanding of the groundwater flow component of nitrogen loading in small watersheds draining into Long Island Sound

Excessive nitrogen discharge is a major concern for the Long Island Sound. Programs have been implemented to reduce point sources of nitrogen to the sound, but little is known about the nonpoint sources. This study aims to better understand the current groundwater contributions of nitrogen from nonpoint sources in the Long Island Sound watershed. During the spring and summer of 2022, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, collected water-quality samples to analyze nutrients (nitrogen and phosphorus), chloride, and bromide at 45 stations in the Long Island Sound watershed in Connecticut, New York, and Rhode Island. The stations were in small drainage watersheds (5 to 30 square kilometers) in the southern part of the Long Island Sound watershed. During two separate synoptic sampling events, water-quality samples and instantaneous streamflow measurements were collected under base-flow conditions (where the streamflow is dominated by groundwater inputs rather than overland flow or runoff flow). One sampling event was in the nongrowing season (April 24–25, 2022), and the other was in the growing season (June 30–July 1, 2022). To calculate instantaneous nitrogen loads and yields, streamflow was measured at the time of sample collection. Nitrogen concentrations, loads, and yields varied among sampling stations and by season. Total filtered nitrogen concentrations were generally lower in the nongrowing season (from less than 0.14 to 1.9 milligrams per liter) than in the growing season (from less than 0.23 to 3.0 milligrams per liter). Nitrate plus nitrite concentrations showed little variation between the nongrowing and growing seasons. Unfiltered ammonia plus organic nitrogen concentrations were generally lower in the nongrowing season (from less than 0.07 to 0.83 milligram per liter) than in the growing season (from 0.11 to 0.98 milligram per liter). In contrast, total filtered and unfiltered nitrogen loads and yields were higher in the nongrowing season than during the growing season, likely because streamflows were higher during the nongrowing season. Total unfiltered nitrogen yields during the nongrowing season ranged from less than 0.15 to 5.0 kilograms per square kilometer per day. Total unfiltered nitrogen yields during the growing season ranged from less than 0.12 to 2.5 kilograms per square kilometer per day. Total filtered nitrogen yields during the nongrowing season ranged from less than 0.13 to 5.2 kilograms per square kilometer per day. Total filtered nitrogen yields during the growing season ranged from less than 0.06 to 2.5 kilograms per square kilometer per day.

Connecticut, New York, Rhode Island↗
USGS2024

Chloride concentrations in groundwater from the western part of the Southern Hills regional aquifer system, Louisiana, 2021–22

Groundwater is heavily used for public supply and industrial uses in the Baton Rouge, Louisiana, area. Lowered water levels resulting from groundwater withdrawals have induced the movement of saltwater towards wells in East Baton Rouge and West Baton Rouge Parishes. Saltwater intrusion has the potential to affect water supply infrastructure, reduce water availability for some uses, and increase treatment costs. To document current conditions, samples were collected from 161 wells screened in 10 aquifers of the Southern Hills regional aquifer system during November 2021 through February 2022. The results were compared with historical data to identify where chloride concentrations are increasing, which could indicate that saltwater intrusion is occurring. Saltwater intrusion, to varying degrees and areal extents, was observed in most of the 10 aquifers. The limited availability of monitoring wells near or within some of the known saltwater plume areas restricts tracking of the movement or delineation of the plumes’ current extents.

Louisiana↗
USGS2024

Simulated mean monthly groundwater-transported nitrogen loads in watersheds on the north shore of Long Island Sound, 1993–2022

Elevated nitrogen loads are pervasive in the Long Island Sound, an estuary that receives freshwater and nutrients from both surface-water and groundwater discharge. Surface-water nitrogen loads to the Long Island Sound are relatively well characterized, but less is known about groundwater-transported nitrogen loads. Prior work on the northern shore of Long Island Sound (Connecticut and areas of New York and Rhode Island) suggested that groundwater travel times are relatively short (median less than 2 years) and that decade-long nutrient legacies are not widespread. Because the travel times are short, groundwater flow and nutrient loads likely vary substantially between months. In the current study, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency’s Long Island Sound Study and the Connecticut Department of Energy and Environmental Protection, developed a set of models to better characterize spatial and temporal patterns of groundwater-transported nitrogen loading from atmospheric deposition, septic systems, and fertilizers within the study area. The models provide an estimate, with uncertainty, of groundwater-transported nitrogen loads in the study area, filling a key gap in the nitrogen budget for Long Island Sound. The models also highlight the spatial and temporal variation in nitrogen loading throughout the study area. The modeling workflow involved four models. (1) A soil-water-balance model was developed by using the Soil-Water-Balance software to simulate groundwater recharge across the study area for water years 2005 through 2022. The simulated mean monthly recharge from the soil-water-balance model was used as input into a groundwater-flow model. (2) The groundwater-flow model was developed by using the MODFLOW 6 software and data for water years 1993 through 2022 and simulates average monthly hydrologic conditions. The groundwater-flow model was calibrated by using the Iterative Ensemble Smoother method within the PEST++ software. The Iterative Ensemble Smoother method generates an ensemble of sets of parameter values, with each set producing reasonable simulated hydrologic parameter values. (3) An ensemble of MODPATH particle-tracking simulations were run to generate particle flow paths and travel times, with each simulation using a different set of the flow model parameters. (4) A nitrogen load model uses the MODPATH simulation outputs to track nitrogen from the land surface through multiple attenuation zones until it discharges into fresh or saline surface water. As with the groundwater-flow model, the nitrogen model simulated average monthly groundwater-transported nitrogen loads for water years 1993 through 2022. One novel aspect of the nitrogen load model is that the nitrogen attenuation parameters were calibrated to observed nitrogen loads. Across the ensemble of simulated nitrogen loads, the median study-area-wide monthly simulated nitrogen loads from the aquifer to Long Island Sound throughout the year ranged from 900 to 18,600 kilograms of nitrogen per day, with a median load of 5,100 kilograms of nitrogen per day. The simulated loads were based on average monthly conditions for water years 1993 through 2022. Loads were highest during the winter and early spring and lowest during the late summer. However, simulated travel times for groundwater and nitrogen loads discharged to Long Island Sound during summer were longer than travel times for groundwater and loads discharged during the winter, indicating that, on average, groundwater discharged during summer traveled along different, and longer, flow paths, than groundwater discharged during winter. This indicates that summer loads would respond more slowly to changes in nitrogen inputs at the water table than winter loads. Over the entire study area, approximately 15 percent of the simulated load is from atmospheric deposition sources, 30 to 40 percent is from fertilizer, and 50 to 60 percent is from septic systems. The final analysis of the study involved simulating the change in groundwater-transported nitrogen load in response to upgrading septic systems or reducing fertilizing inputs to areas of turf grass. Both management interventions reduced the groundwater-transported nitrogen load, and reductions were greater in areas with greater loads from septic systems or turf-grass fertilizers. The delay between management actions and substantial reductions in groundwater-transported nitrogen loads varied seasonally; loads during the late summer months remained elevated longer than the winter loads.

Connecticut, Rhode Island↗