USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Comparative Physiology A”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,681 records · Page 58Linked to original sources
USGS2025

The 1912 Ms 7.2 earthquake in the Denali region of central Alaska

The 2002 M w 7.9 earthquake in central Alaska ruptured 340 km on three faults—Susitna Glacier thrust fault, Denali fault, Totschunda fault—crossing both the Richardson Highway and the Alaska Pipeline. Its occurrence prompted renewed interest in historical large earthquakes that possibly originated on the Denali fault. One of these earthquakes was a M s 7.2 event on July 7, 1912, which we revisit with two approaches: (1) probabilistic relocation of the epicenter using globally recorded arrival times, and (2) compilation and reassessment of shaking intensity reports to estimate a macroseismic epicenter. Our preferred instrumental epicenter is west of the Parks Highway and in agreement with the maximum‐reported shaking, which was from the Parker–Browne expedition of Denali. We also relocated a M s 6.4 aftershock, whose epicenter is 11 km from the mainshock. Candidate faults for the 1912 earthquake include the Denali fault, the McLeod Creek thrust fault, and the Kantishna Hills thrust fault. Future analysis of active faults, paleoseismic results, 1912 instrumental data, and 1912 felt reports may help in interpreting the fault and mechanism of the 1912 earthquake.

Alaska↗
USGS2024

Pesticide occurrence in shallow groundwater in three regions of agricultural land use: Baldwin County, the Wiregrass region, and the Tennessee River valley region of Alabama, 2009–20

As part of a cooperative investigation between the U.S. Geological Survey and the Alabama Department of Agriculture and Industries, a network of 22 groundwater wells were sampled from 2014 through 2020 for about 230 pesticide and pesticide degradate compounds. Wells were located in three regions of intensive agricultural land use in Alabama: Baldwin County, the Wiregrass region, and the Tennessee River valley region. Metolachlor sulfonic acid, a degradate of the herbicide metolachlor, was the most frequently detected compound, occurring in about 70 percent of the samples. Three other compounds, metolachlor, atrazine, and 2-chloro-4-isopropylamino-6-amino-s-triazine, were also detected in more than half of the samples. Metolachlor and its degradates accounted for 33 of the 50 greatest compound concentrations study-wide, including the maximum pesticide concentration across all compounds (62,500 nanograms per liter). The frequency and magnitude of detections of many specific pesticide compounds varied among the three regions, but all detected pesticide concentrations were well below the U.S. Environmental Protection Agency maximum contaminant levels and applicable human health benchmarks. Sample results were combined with results of previous (2009–13) sampling to provide a continuous time-series of data for 2009–20. More than half of the 289 pesticide compounds analyzed during 2009–20 were not detected in any samples. Only four compounds were detected at great enough frequency throughout the 10 sampling years to evaluate patterns of change through time. Metolachlor and its degradate, metolachlor sulfonic acid, were frequently detected in all regions. Atrazine and its degradate, 2-chloro-4-isopropylamino-6-amino-s-triazine, were also detected in wells from all regions, but the variability and magnitude of concentrations were greatest in the Tennessee River valley region. No apparent temporal pattern in concentrations was found.

Alabama↗
USGS1977

Summary of results from electromagnetic and galvanic soundings on Kilauea Iki lava lake, Hawaii

The purpose of this report is to summarize various electrical sounding studies made on the Kilauea Iki lava lake and to present some of the preliminary interpretations that resulted from the measurements. The following discussion is not intended as a complete interpretation, but is intended to summarize the major points made in an invited oral presentation at the American Geophysical Union fall meeting held in San Francisco, Calif. on December 6, 1976. This paper was part of a group of papers dealing with various geophysical studies recently made on the Kilauea Iki lava lake. A general plan map of Kilauea Iki lava lake is shown in figure 1. Electromagnetic (EM) loop-loop soundings, D.C. resistivity soundings, and VLF apparent resistivity measurements were made on the lave lake surface. All of these surveys were made to determine the geoelectric structure of the lava lake and to determine parameters of the molten basaltic lens that exist in the partially solidified lava lake.

Hawaii↗
USGS2000

Shoals and valley plugs in the Hatchie River watershed

Agricultural land use and gully erosion have historically contributed more sediment to the streams of the Hatchie River watershed than those streams can carry. In 1970, the main sedimentation problem in the watershed occurred in the tributary flood plains. This problem motivated channelization projects (U.S. Department of Agriculture, 1970). By the mid-1980's, concern had shifted to sedimentation in the Hatchie River itself where channelized tributaries were understood to contribute much of the sediment. The Soil Conservation Service [Natural Resources Conservation Service (NRCS) since 1996] estimated that 640,000 tons of bedload (sand) accumulates in the Hatchie River each year and identified roughly the eastern two-thirds of the watershed, where loess is thin or absent, as the main source of sand (U.S. Department of Agriculture, 1986a). The U.S. Geological Survey (USGS), in cooperation with the West Tennessee River Basin Authority (WTRBA), conducted a study of sediment accumulation in the Hatchie River and its tributaries. This report identifies the types of tributaries and evaluates sediment, shoal formation, and valley-plug problems. The results presented here may contribute to a better understanding of similar problems in West Tennessee and the rest of the southeastern coastal plain. This information also will help the WTRBA manage sedimentation and erosion problems in the Hatchie River watershed. The source of the Mississippi section of the Hatchie River is in the sand hills southwest of Corinth, Mississippi (fig. 1). This section of the Hatchie River flows northward in an artificial drainage canal, gathering water from tributary streams that also are channelized. The drainage canal ends 2 miles south of the Tennessee State line. The Tennessee section of the Hatchie River winds north and west in a meandering natural channel to the Mississippi River. Although most of the Hatchie River tributaries are also drainage canals, the river's main stem has kept most of its natural character. The Hatchie River flows through a wide valley bottom occupied mostly by riverine wetland. Historically, the valley bottom has supported hardwood forests. Since publication of the first Hatchie River report (U.S. Department of Agriculture, 1970), the channel of the river has become shallower, and flooding has increased (U.S. Department of Agriculture 1986b). These wetter conditions inhibit growth of hardwoods and lead to premature hardwood mortality. The NRCS has predicted that despite efforts to control erosion in the uplands, most of the valley-bottom forest will die. '...swamping may be so prevalent as to change most of the Hatchie River Basin flood plain into a marsh condition, with the only remnants of the present bottomland hardwood timber remaining. (U.S. Department of Agriculture, 1986b). Loss of channel depth has been concentrated in short reaches near tributary mouths. At the mouths of Richland, Porters, Clover, and Muddy Creeks, navigation has become difficult for recreational users (Johnny Carlin, West Tennessee River Basin Authority, oral commun., 1998). As the low-gradient alluvial system of the Hatchie River accumulates sediment, another common outcome has been the formation of valley plugs, areas where 'channels are filled with sediment, and all the additional bedload brought downstream is then spread out over the flood plain until a new channel has been formed' (Happ, 1975). Valley plugs typically form where the slope of a sand-laden tributary decreases downstream, or where the tributary joins its parent stream (Happ and others, 1940; Diehl, 1994, 1997; Smith and Diehl, 2000).

Mississippi, Tennessee↗
USGS2026

Remote sensing enables basin-scale inventories of coal mine methane

Underground coal mines are important global sources of methane, but emission estimates are uncertain. We show that emission estimates for individual mines from aircraft remote-sensing surveys in the United States agree within 40% with direct measurements used for national emission reporting (IPCC Tier 3 estimate). Such direct measurements are unavailable in most countries, which rely on estimated emission factors (EFs) applied to coal-production rates. We find that EFs from IPCC Tier 1 and the Model for Calculating Coal Mine Methane (MC2M) methods overestimate U.S. emissions 3-fold due to incorrect dependence on mine depth. An IPCC Tier 2 method using measured basin-specific mine gas content agrees with direct emission measurements but does not account for gob well emissions and requires gas content data that are generally unavailable. We show that aircraft remote sensing for a small sample of mines can successfully estimate basin-specific EFs for ventilation shafts and gob wells, enabling estimates of basin- and national-scale emissions. We discuss how the method can be applied with satellite remote sensing to quantify coal emissions worldwide.

Alabama, Colorado, Kentucky, New Mexico, Ohio, Pen↗
USGS2024

Are the horizontal-to-vertical spectral ratios of earthquakes and microtremors the same?

We consider the similarities and differences between earthquake and microtremor horizontal‐to‐vertical spectral ratios (eHVSR and mHVSR, respectively) using a dataset of 161 sites in southern California. Quantitative comparisons are made in terms of the eHVSR and mHVSR lognormal median curves, as well as the frequencies and amplitudes associated with the fundamental‐ and higher‐mode resonances where present. The results show only 58% of the eHVSR–mHVSR pairs agree in terms of their median curve and only 25% of the eHVSR–mHVSR pairs agree in terms of shared resonances, which increases to 68% if flat HVSRs are considered equivalent. Furthermore, while the shared resonances match very well in terms of frequency (root mean square error, RMSE, <0.11 Hz), the amplitudes of those resonances do not agree (RMSE >1.6). These findings demonstrate that while eHVSR and mHVSR agree at some sites, they are not equivalent at all sites. To investigate if the agreement between eHVSR and mHVSR could be related to features of the microtremor data, earthquake recordings, and/or the site conditions, three machine learning (ML) models at varying levels of interpretability are presented. The ML models—which include multivariate logistic regression, gradient‐boosted trees, and support vector machines—show only partial success at using site‐specific data to predict whether eHVSR and mHVSR will likely agree in terms of their median curve (accuracy of 78%) and number of resonances (accuracy of 84%). Therefore, we conclude that while eHVSR and mHVSR can be quite similar in terms of resonant frequencies at some sites, they are not identical at all sites. Furthermore, preliminary evidence shows that the agreement of eHVSR and mHVSR can be predicted a priori given features of the microtremor measurements, earthquake recordings, and site conditions, although a larger dataset will be necessary for developing a robust predictive model.

California↗
USGS2024

Fairweather transform boundary Oligocene to present orogenesis: Fairweather Range vertical extrusion and rotation of the Yakutat microplate at ca. 3 Ma

Oblique-slip along transform fault boundaries is often partitioned between a strike-slip system and thrust faults that accommodate contraction. However, topography along the Yakutat-North American transform (Fairweather fault), is asymmetric with low-terrain above active thrusts on the western, Yakutat side of the transform and high topography on the continental side with peaks >4500 m (Mount Fairweather: 4671 m) to the west of the Border Ranges fault, limited recorded earthquakes >M4, and no apparent reverse faults to generate the highest terrain. In this study we compile, for the first time, published U-Pb zircon, 40 Ar/ 39 Ar and K-Ar (hornblende, muscovite, and biotite) and U-Th/He and fission-track (zircon and apatite) bedrock ages (109) from 75 samples to investigate the exhumation history of the Fairweather Range region, complemented by a published detrital sample (ZFT and AFT) and 13 new 40 Ar/ 39 Ar (hornblende, biotite, and K-feldspar) ages on 9 bedrock samples from both sides of the Fairweather fault. Additionally, we examined published seismicity and geodetic data of the Fairweather region and assessed if plate paleo-vectors correlate with the cooling history of the Fairweather Range. Cooling age, seismic, and block-motion patterns indicate the Fairweather Range has been vertically extruded between the Fairweather and the Border Ranges faults as a coherent block since ca. 25 Ma. The pre-6 Ma Pacific plate motion (N30°W) aligns with the N33°W strike of the Fairweather Fault whereas a hypothetical pre-6 Ma Yakutat microplate paleo-vector of (N39°W) does not: indicating a post-6 Ma timing for Yakutat microplate counter-clockwise rotation (9°). We infer that rotation and impingement of the Yakutat microplate along the Fairweather fault at ca. 3 Ma led to the development of the Fairweather restraining bend and increased cooling rates. The resultant thickened Fairweather welt and the ∼30 km thick southeast end of the Yakutat microplate compounded double-indenter tectonics into Alaska's southeast convergent corner

Tectonophysics↗
USGS2024

Three-dimensional temperature maps of the Williston Basin, USA: Implications for deep hot sedimentary and enhanced geothermal resources

As part of U.S. Geological Survey's (USGS) efforts to identify and assess geothermal energy resources of the US, a three-dimensional (3D) geologic and thermal model has been constructed for the Williston Basin, USA. The geologic model consists of all sedimentary units above the Proterozoic and Archean crystalline rock (called basement herein), with a total sedimentary thickness of up to 5 km near the basin center. Twenty-nine geologic units were mapped from interpreted formation tops from 16,465 wells. A 3D temperature model was constructed to a depth of 7 km by constructing a 3D heat flow model for the sedimentary units, followed by estimating underlying temperature using a one-dimensional (1D) analytic solution for heat flow within the underlying crystalline basement. Using the sedimentary basin model, heat flow was simulated in 3D and was calibrated using three temperature datasets: 1) 24 high-confidence static temperature logs (equilibrium thermal profiles), 2) more than15,000 drill stem test (DST) measurements from >7,000 wells, and 3) more than 45,000 bottomhole temperature (BHT) measurements from >14,000 wells. The DST and BHT datasets provide broad spatial coverage, but are lower confidence, primarily because measurements were made prior to attaining thermal equilibrium. DST and BHT measurements were binned regionally to develop representative thermal profiles that generally agree with these lower quality data (hereafter called pseudowell temperature profiles). Layer properties (primarily thermal conductivity and compaction curves) were set to best estimate values, then the heat flow model was calibrated to fit pseudowell and static temperature logs primarily by adjusting basal heat flow to approximate the overall temperature profile. Minor adjustments to thermal conductivity allowed adjusting changes in slope at lithologic contacts. Resulting maps include 3D temperature and basal (bottom of sedimentary units) heat flow estimates, which are used as input for the temperature model of the basement. The crystalline basement temperature model uses an analytic 1D solution to the heat flow equation that requires estimates of heat flow and temperature at the upper boundary (i.e., the sediment/basement contact), radiogenic heat production within the crystalline basement, and reference thermal conductivity (i.e., uncorrected for temperature). Two regions of high heat flow are identified: 1) in western North Dakota along the North American Central Plains Conductivity Anomaly and 2) in eastern Montana near the Poplar dome. Within the sedimentary column in the center of the basin of the basin, an area of approximately 100,000 km2 is predicted to have moderate- to high-temperature geothermal resources (>90 °C) under the thickest sequences of sediments. Where thick insulation and high heat flow coincide, electric-grade resources can be less than 4 km deep. Assuming a maximum feasible drilling depth of 7 km, temperatures are predicted to be as high as 175 °C. The geologic model may be used to identify strata at sufficient temperatures that may have natural permeability or that may have conditions that favor development of enhanced/engineered geothermal systems resources.

Montana, North Dakota, South Dakota↗
USGS1998

Transmissivity and water quality of water-producing zones in the intermediate aquifer system, Sarasota County, Florida

The intermediate aquifer system is an important water source in Sarasota County, Florida, because the quality of water in it is usually better than that in the underlying Upper Floridan aquifer. The intermediate aquifer system consists of a group of up to three water-producing zones separated by less-permeable units that restrict the vertical movement of ground water between zones. The diverse lithology, that makes up the intermediate aquifer system, reflects the variety of depositional environments that occurred during the late Oligocene and Miocene epochs. Slight changes in the depositional environment resulted in aquifer heterogeneity, creating both localized connection between water-producing zones and abrupt culmination of water-producing zones that are not well documented. Aquifer heterogeneity results in vertical and areal variability in hydraulic and water-quality properties. The uppermost water-producing zone is designated producing zone 1 but is not extensively used because of its limited production capability and limited areal extent. The second water-producing zone is designated producing zone 2, and most of the domestic- and irrigation-supply wells in the area are open to this zone. Additionally, producing zone 2 is utilized for public supply in southern coastal areas of Sarasota County. Producing zone 3 is the lowermost and most productive water-producing zone in the intermediate aquifer system. Public-supply well fields serving the cities of Sarasota and Venice, as well as the Plantation and Mabry Carlton Reserve well fields, utilize producing zone 3. Heads within the intermediate aquifer system generally increase with aquifer depth. However, localized head-gradient reversals occur in the study area, coinciding with sites of intense ground-water withdrawals. Heads in producing zones 1, 2, and 3 range from 1 to 23, 0.2 to 34, and 7 to 42 feet above sea level, respectively. Generally, an upward head gradient exists between producing zones 3 and 2. However, an upward head gradient between producing zones 2 and 1 does not consistently occur throughout Sarasota County, probably the result of greater ground-water withdrawals from producing zone 2 than from producing zone 1. The transmissivity of the intermediate aquifer system is spatially variable. Specific-capacity data from selected wells penetrating producing zones 2 and 3, were used to estimate transmissivity. Estimated transmissivity values for producing zones 2 and 3 range from about 100 to 26,000 feet squared per day and from about 1,300 to 6,200 feet squared per day, respectively. Because the capacity of specific water-producing zones is highly variable from site to site, estimating the performance of a specific water-producing zone as a water resource is difficult. Water samples collected during the study were analyzed for major-ion concentrations. Generally, bicarbonate type water from rock interaction occurs in northern Sarasota County; enriched calcium-magnesium-sulfate type water from deeper aquifers occurs in central Sarasota County; and sodium-chloride type water from saltwater mixing occurs in southern Sarasota County. In some areas of northern Sarasota County, the major-ion concentrations in water are lower in producing zone 2 than in producing zone 1. Major-ion concentrations in water are higher in producing zone 3 throughout the study area. A major objective of the study was to evaluate hydraulic and water-quality data to determine distinctions that could be used to characterize a particular producing zone. However, data indicate that both hydraulic and water-quality properties are highly variable within and between zones, and are more related to the degree of connection between and areal extent of water-producing zones than to aquifer depth and distance from the coast.

Florida↗
USGS2025

Sources of water and salts for the Zuni Salt Lake in west-central New Mexico

The Zuni Salt Lake is located in a maar in west-central New Mexico and contains hypersaline water that has long been used by Native Americans for religious purposes and the collection of salt. There have been several investigations suggesting different sources for the water and salt to the lake. Springs, seeps, and ephemeral streamflow have all been observed to contribute freshwater to the lake, and brackish to hypersaline seeps have been documented along the banks of the lake. This report summarizes the findings of a study that characterizes the lake’s hydrology, its water and salinity sources, and the hydrogeologic conceptual model. Regional groundwater levels indicate that each of the aquifers in the area have the potential to discharge groundwater to the lake. There is also evidence of vertical groundwater flow pathways at the maar that were likely created by the igneous intrusion that fractured the intersecting aquifers. A detailed water budget was constructed from continuous lake stage, precipitation, and evaporation data to estimate the groundwater inflow to the Zuni Salt Lake. It was determined that groundwater inflow to the lake is 441 ±94 acre-feet per year, which composes as much as 77 percent of the total inflows. The high sodium and chloride concentrations measured in two hypersaline samples collected near the lake indicate that the majority of the dissolved solids entering the lake are from a hypersaline groundwater source. The geochemical and isotopic compositions measured in the lake and surrounding features support the interpretation that hypersaline groundwater is the primary source of salts to the lake, which is likely sourced from the older (and deeper) Permian units. The hypersaline groundwater samples collected during this investigation have a unique aqueous chemistry relative to each of the mapped aquifers, and variability in groundwater compositions is interpreted to result from differences in minerology and residence time.

New Mexico↗
USGS2026

Generating geochemical and mineralogy distributions of soil in the conterminous United States using Bayesian hierarchical spatial models

Characterizing geochemical and mineralogical soil distributions across large spatial extents is essential for understanding mineral resources, ecosystem processes, and environmental risks. Rasters of soil geochemical distributions for the conterminous United States, however, are limited. We present a Bayesian modeling workflow and tool for generating predictive geochemical and mineralogy distribution maps for the conterminous United States using integrated nested Laplace approximation (INLA) with the stochastic partial differential equation approach. By modeling soil geostatistical data with environmental covariates (soil properties, topography, climate, and land cover), we generate predictive distributions of soil geochemistry that can be mapped or extracted for further analyses. As an example, we model the spatial distribution of trace elements in soil relevant to vertebrate health (cobalt, copper, iron, manganese, selenium, and zinc) and provide a workflow that can be used to generate and visualize predictive distributions of 39 other major and trace elements and 21 minerals of the soil survey, supporting a variety of ecological, environmental, and agricultural applications.

MethodsX↗
USGS1995

The distribution of bromide in water in the Floridan aquifer system, Duval County, northeastern Florida

Although Duval County, Florida, has ample ground-water resources for public supply, the potential exists for a problem with excessive disinfectant by-products. These disinfectant by-products result from the treatment of raw water containing low concentrations of bromide and naturally occurring organic compounds. Because of this potential problem, the relation of bromide concentrations to aquifer tapped, well location and depth, and chemical characteristics of water in the Floridan aquifer system underlying Duval County were studied to determine if these relations could be applied to delineate water with low-bromide concentrations for future supplies. In 1992, water samples from 106 wells that tap the Floridan aquifer system were analyzed for bromide and major dissolved constituents. A comparison of bromide concentrations from the 1992 sampling with data from earlier studies (1979-80) indicates that higher bromide concentrations were detected during the earlier studies. The difference between the old and new data is probably because of a change in analytical methodology in the analysis of samples. Bromide concentrations exceeded the detection limit (0.10 milligrams per liter) in water from 28 of the 106 wells (26 percent) sampled in 1992. The maximum concentration was 0.56 milligrams per liter. There were no relations between bromide and major dissolved constituents, well depth, or aquifer tapped that would be useful for determining bromide concentrations. Areal patterns of bromide occurrence are not clearly defined, but areas with relatively high bromide concentrations tend to be located in a triangular area near the community of Sunbeam, Florida, and along the St. Johns River throughout Duval County.

Florida↗
USGS2025

An empirical Green’s function approach for isolating directivity effects in earthquake ground-motion amplitudes

In this study, we apply an empirical Green’s function (eGf) method within a ground‐motion modeling framework to mitigate trade‐offs between source, path, and site effects. Many physical processes contribute to spatial variations in observed ground motions, including earthquake radiation pattern, directivity, variable path attenuation, and site effects. Current nonergodic ground‐motion models use spatially varying coefficients for path and site effects, but they do not address trade‐offs with complex earthquake source effects. To quantify the influence of directivity on ground‐motion amplitudes, we use records from multiple smaller earthquakes with epicenters near that of a larger event. We use these small magnitude events as eGfs and estimate repeatable path and site effects at individual stations, assuming that the average adjustments are not controlled by directivity. We adjust residuals from the larger earthquake using the eGf terms, isolating effects related to the rupture. This method clearly enhances the observed broadband directivity observed in the 2022 M 5.1 and 2007 M 5.4 Alum Rock earthquake ground motions, reinforcing the conclusion that their ruptures were unilateral. For the 2004 M 6.0 Parkfield earthquake, we find a bilateral rupture model better fits the data because variations in rupture velocity, slip rate, and slip distribution seem to have a stronger effect on the ground motions than rupture direction alone. Applying eGf adjustments reduces the standard deviation of the rupture models over the three earthquakes by 32% on average and by up to 57% for the 2022 Alum Rock earthquake, confirming we have effectively removed repeatable effects related to the wave propagation path and site response. We propose a novel measure of the frequency‐dependent directivity amplification strength as the reduction in ground‐motion residual variability gained by fitting a directivity model; for the three earthquakes considered, this parameter varies between 25% and 75%, indicating that directivity can strongly influence ground motions and should be considered in ground‐motion modeling.

California↗
USGS2025

The Mammoth magnetic anomaly, Pinal County, Arizona

A high-resolution Earth Mapping Resources Initiative airborne geophysical survey was flown in the southwest North American porphyry copper province to improve bedrock geologic maps and to identify areas that have unrecognized critical mineral resource potential. During the review of the aeromagnetic data, a distinctly monopolar-shaped, negative magnetic anomaly was observed at a flight elevation of 200 m above the ground with a maximum amplitude of –9500 nT. We have named this the Mammoth magnetic anomaly (MMA) because it is centered 12 km northeast of the town of Mammoth, Arizona, USA. The total field anomaly (TFA) contour of –500 nT enclosing the MMA defines an elongate shape measuring 2.5 km long by 1 km wide that trends northwest–southeast. Given the striking nature of this negative, monopolar-shaped magnetic anomaly, we conducted a ground campaign in May 2025 to determine its authenticity and potential relationship to critical mineral endowment. The MMA was confirmed on the ground with a TFA approaching –46,000 nT. Total magnetic intensity (TMI) observations routinely fell below the 18,000 nT operating floor of an industry-standard cesium-vapor total field magnetometer, and extremely low TMI measurements were corroborated along coincident traverse lines using two high dynamic range, but lower sensitivity, smartphone vector magnetometers. The lowest TMI values recorded by both smartphone magnetometers were 1000 nT and confirmed with multiple adjacent and crossing lines. Field observations suggest that this magnetic feature is caused by strong remanent magnetization within fine-grained magnetite hosted within locally altered Pinal Schist.

Arizona↗
USGS2025

Salinas Valley integrated hydrologic and reservoir operations models, Monterey and San Luis Obispo Counties, California

The area surrounding the Salinas Valley groundwater basin in Monterey and San Luis Obispo Counties of California is a highly productive agricultural area, contributes significantly to the local economy, and provides a substantial portion of vegetables and other agricultural commodities to the Nation. This region of California provides about half of the Nation’s lettuce, celery, broccoli, and spinach each year. Thus, this agricultural area provides significant volumes of agricultural products not just for California but the entire United States. Changes in population and increased agricultural development, which includes a shift toward more water-intensive crops, and climate variability, have put increasing demand on both surface water and groundwater resources in the valley. This has resulted in water management challenges in the Salinas Valley that are predominantly related to distribution of water supply throughout the basin. Where and when the water is present in the surface and subsurface does not coincide with where and when the water is needed. To deal with the distribution issue, historically water has been used conjunctively in the valley. Conjunctive use is a water management strategy that coordinates surface water and groundwater use to maximize water availability. Groundwater is used throughout the Salinas Valley to meet water demands when surface water supplies are insufficient. Availability of surface water is constrained by climate. Precipitation and streamflow vary seasonally and year to year. Although there are two reservoirs in the Salinas Valley to capture and store water during wet periods, the only conveyance of reservoir water to coastal agricultural areas is the Salinas River. Increasing demand on groundwater and surface water resources throughout the Salinas Valley has resulted in undesirable effects of unsustainable water use, such as surface water depletion, groundwater level declines, storage depletion in the principal aquifers, and seawater intrusion. To address these escalating issues, local communities, water management agencies, and groundwater sustainability agencies are evaluating how to sustainably manage both their surface water and groundwater resources. To meet water demands and reduce undesirable effects of unsustainable water use, continued conjunctive management of surface water and groundwater would ideally incorporate strategies to deal with increases in demand and a variable climate. To evaluate the challenging water management issues in the Salinas Valley, the U.S. Geological Survey, Monterey County Water Resource Agency, and the Salinas Valley Basin Groundwater Sustainability Agency developed a comprehensive suite of models that represent the Salinas Valley Hydrogeologic system called the Salinas Valley System Model. The Salinas Valley Geologic Framework was developed to characterize the subsurface using various topographic and geologic data sources, including information on hydrogeologic units, their surfaces and extents, geologic structures, lithology, and elevations from borehole data and cross sections, as well as details on faults and existing models. The Salinas Valley Watershed Model simulates the entire Salinas River watershed. Monthly surface water inflows into the integrated hydrologic model domain were simulated using the Salinas Valley Watershed Model. The historical model uses historical climate data, water and land use data, and reservoir releases to simulate agricultural operations, including landscape water demands, diversions, and reclaimed wastewater. The operational model adds an embedded reservoir operations framework to the simulation of the historical model that allows specified operational rules to simulate reservoir releases and changes in reservoir storage. The operational model assumes current reservoir operations and constant land use, which differs from historical conditions. Thus, the operational model is a hypothetical baseline model that can be used by local water managers to evaluate and quantify potential benefits of water supply projects. Together, the geologic framework, watershed, historical, and operational models form a tool that can be used to simulate irrigated agriculture and associated reservoir operations of the integrated hydrologic system of the Salinas Valley.

EarthArXiv↗
USGS2024

New occurrences of the rare, REE minerals daqingshanite, törnebohmite, biraite, sahamalite, and ferriperbøeite from the Sheep Creek area, Montana, USA

Over 30 small, discontinuous, tabular carbonatite bodies are located in the Sheep Creek area, Ravalli County, southwest Montana. The age and origin of these REE-Nb-rich deposits are currently being investigated. The purpose of this paper is to document the occurrence of several rare minerals, including daqingshanite, törnebohmite, biraite, sahamalite, and ferriperbøeite, in two of the carbonatite bodies. These minerals are found in association with monazite, hydroxylbastnäsite, ferriallanite, calcite, dolomite, baryte, quartz, actinolite, apatite, celsian, and Sr-rich aragonite. Automated SEM-EDS was used to target the areas of interest in polished specimens for more detailed spot SEM-EDS and electron probe microanalysis. Raman spectra were also acquired for each of the rare minerals. The complex mineralogy of the Sheep Creek carbonatites is most likely due to several overlapping thermal events, including primary magmatic, overprinting hydrothermal, and supergene weathering stages. The rare minerals described in this study are believed to be hydrothermal and/or carbothermal in origin, although no estimates of temperature are available at this time.

Montana↗
USGS2026

Legacy of the fumigant 1,2-dibromo-3-chloropropane (DBCP) in California groundwater

The fumigant pesticide 1,2-dibromo-3-chloropropane (DBCP) was widely used in California agriculture during the 1960s and 1970s before being banned in 1979. Despite this ban, DBCP continues to contaminate groundwater due to its persistence and mobility. This study evaluates the distribution, historical trends, and projected persistence of DBCP in California using data from over 13,000 public supply wells and additional domestic, irrigation, and observation wells (1980-2022). Since 2010, DBCP has been detected in 9% of public supply wells statewide, with higher frequencies in the San Joaquin Valley (21%) and upper Santa Ana River watershed (13%), where DBCP use was most prevalent. Approximately 70% of wells had decreasing concentration trends, whereas increases were more common in deeper wells, indicating downward vertical migration of the DBCP front. Groundwater age estimates show that recharge timing aligns with the 1960s–1970s loading period, enabling reconstruction of peak inputs and providing a basis for age based modeling. To estimate future persistence, we applied a one dimensional advection–dispersion model that simulates long term declines in peak concentrations based on groundwater age, historical loading, and a 38 year degradation half life. Model projections suggest that concentrations above the maximum contaminant level may persist in a declining number of wells until approximately 2080 (range: 2048–2109), with longer persistence in the San Joaquin Valley. The simplified modeling framework, based on age distributions typical of wells capturing peak concentrations, can provide practical regional scale assessment of non-point source contaminants where long-term monitoring exists. This study highlights how the legacy of DBCP contamination will likely affect California's groundwater resources throughout the 21st century.

California↗
USGS2025

Fiber-optic distributed temperature sensing of hydrologic processes—Diverse deployments and new applications by the U.S. Geological Survey

Fiber-optic distributed temperature sensing instruments harness the temperature-dependent properties of glass to measure temperature continuously along optical fibers by using precise pulses of laser light. In the mid-2000s, this technology was refined for environmental monitoring purposes such as snowpack-air exchange, groundwater/surface-water exchange, and lake-water stratification. Fiber-optic distributed temperature sensing has revealed unprecedented details about preferential flow processes; however, the method is labor intensive and requires specific training, resulting in limited use by the broader water community. With the ongoing national implementation of the U.S. Geological Survey Next Generation Water Observing System, there has been renewed interest in harnessing the unique spatiotemporal monitoring capabilities of fiber-optic distributed temperature sensing. This fact sheet briefly describes this technology, highlights uses by the U.S. Geological Survey, and discusses current applications and future opportunities.

Fact Sheet↗