USGS Science⌕ Search

SEARCH · USGS Science

Results for “Arizona Geological Survey Contributed Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,128 records · Page 58Linked to original sources
USGS2026

Asynchronous landslide seasonality across the United States

Mid-range landslide outlooks can facilitate weather-related landslide preparedness and disaster response planning, but seasonal landslide activity remains poorly quantified at continental scales. Leveraging >55,000 reported landslides from across the United States (U.S.), we used circular statistics to quantify landslide seasonality in 67 National Weather Service County Warning Areas (CWAs). We found regional differences in landslide season timing and duration, with transitions between domains variably corresponding to climate class or river basin. We assessed differences in seasonality by movement type for slides, flows, and falls, detecting apparent, but uncertain, differences between slide and fall seasonalities in 27 of 35 (77%) of CWAs with both types reported. In the Pacific Northwest, where long records exist, we found a credible shift toward a later mean landslide season in western Washington from 1990 to 2020, but no trend in western Oregon. Our results can provide emergency planners a resource to assess seasonal landslide probability nationwide.

Geophysical Research Letters↗
USGS2024

Hypothetical CO2 leakage into, and hydrological plume management within, an underground source of drinking water at a proposed CO2 storage facility, Kemper County, Mississippi, USA

A large Geologic Carbon Sequestration (GCS) hub has been proposed in Kemper County, Mississippi. The target injection interval consists of numerous Cretaceous-aged deep saline aquifers overlain by a competent and extensive regional sealing layer. Above the seal, the deepest Underground Source of Drinking Water (USDW) at the site is the Eutaw aquifer of the Eutaw Group and McShan Formation, undifferentiated. To assess potential risks of leakage from the deep sequestration reservoir, a model of a portion of the Cretaceous Eutaw Group was constructed in this study. Simulations tested various permeabilities, hypothetical leakage rates, and plume mitigation strategies utilizing existing wells. Results suggest that, under the influence of regional groundwater flow fields, leaking CO 2 would effectively bypass the existing wells, and to influence this migration would require very large water extraction rates. Therefore, to ensure plume detection, monitoring for leakage at the injection wells themselves is very important.

Mississippi↗
USGS2026

Distributed volcanic fields—Patterns, products, processes, and plumbing

Distributed volcanic fields—also referred to as “monogenetic fields” or simply “volcanic fields”—are found on every continent, on the seafloors, and in every tectonic setting on Earth. Yet, our understanding of what constitutes a distributed volcanic field, and our knowledge of the common products, spatiotemporal patterns in activity, and plumbing systems of these fields, are commonly poor and (or) debated. Here we provide an overview of the current understanding of distributed volcanic fields (DVFs) through review and compilation of published data, with an emphasis on understanding the characteristics of fields that are essential to prepare for future hazardous volcanic activity. Distributed fields can erupt restricted to variable magma compositions. Activity in these fields produces nearly all types of volcanoes, including scoria and spatter cones, maars, low shields, lava fields, stratovolcanoes, and calderas, but monogenetic volcanoes are the defining characteristic of DVFs. The number of vents and lifespans of DVFs vary greatly; vent numbers range from 2 to greater than 1,000, and fields can remain active for 150,000 to 10 million years. Some characteristics of DVFs appear field dependent. Although the volumes of single monogenetic eruptions within DVFs globally are variable (from less than 0.1 to a few cubic kilometers), each field may have a characteristic range in eruption volumes. Eruptions within distributed volcanic fields can have a random distribution and timing, but spatial and (or) temporal vent clustering and alignment are common, and eruptions may be time or volume predictable. Average eruption recurrence intervals in DVFs span over an order of magnitude, from less than 3 to greater than 100 thousand years. Exposures of the shallow portions of older systems reveal that many magma batches end their ascent before reaching the surface, with some dikes stopping within only meters of the surface. Petrologic insights into the deeper plumbing systems of DVF volcanoes indicate variable depths of magma crystallization and (or) stalling, and that magma transport and storage systems may be unique to a particular DVF and its underlying crustal structure. Both seismic and petrologic data for mafic DVF eruptions corroborate intrusions of magma into storage systems in the months to years before eruption, as well as variable ascent rates through the crust (days to weeks). Few distributed fields are closely monitored, as they erupt infrequently, but these observations imply that the amount of time available to install monitoring instrumentation after the first felt seismicity may be short, as precursory activity is frequently on the order of days to months for modern DVF eruptions. Satellite-based geodesy may provide useful warning in such cases. This chapter concludes with outstanding questions and areas for future research that will aid in our understanding and preparedness for future DVF eruptions.

Professional Paper↗
USGS2024

Relatively stable pressure effects and time-increasing thermal contraction control Heber geothermal field deformation

Due to geological complexities and observational gaps, it is challenging to identify the governing physical processes of geothermal field deformation including ground subsidence and earthquakes. In the west and east regions of the Heber Geothermal Field (HGF), decade-long subsidence was occurring despite injection of heat-depleted brines, along with transient reversals between uplift and subsidence. These observed phenomena contradict current knowledge that injection leads to surface uplift. Here we show that high-yield production wells at the HGF center siphon fluid from surrounding regions, which can cause subsidence at low-rate injection locations. Moreover, the thermal contraction effect by cooling increases with time and eventually overwhelms the pressure effects of pressure fluctuation and poroelastic responses, which keep relatively stable during geothermal operations. The observed subsidence anomalies result from the siphoning effect and thermal contraction. We further demonstrate that thermal contraction dominates long-term trends of surface displacement and seismicity growth, while pressure effects drive near-instantaneous changes.

California↗
USGS2025

Dating a medieval tsunami with uranium-series techniques on Caribbean corals

Uranium-series dates from coral boulders constrain the timing of a medieval tsunami from the Puerto Rico Trench. Previously reported evidence for this tsunami includes hundreds of coral boulders that came to rest hundreds of meters inland on Anegada, British Virgin Islands. New U-series dates on these coral boulders provide limiting dates for the tsunami. The narrowest limits were by dating interior bands of a coral that retains the hemispherical form of a living coral colony, and which include adjustments for the number of annual density band couplets between the dated samples and the boulder exteriors. By those limits, the tsunami dates between 1381 and 1391 CE, and likely occurred during summer or fall. The tsunami is important as the only reported sign that the eastern Puerto Rico Trench has produced a great earthquake. The dating may aid in defining the earthquake source and in communicating tsunami hazards.

British Virgin Islands, Puerto Rico↗
USGS2025

Slow rupture, long rise times, and multi-fault geometry: The 2020 M6.4 southwestern Puerto Rico mainshock

The M 6.4 mainshock of the southwestern Puerto Rico seismic sequence on 7 January 2020, was one of the most impactful modern earthquakes in the northeastern Caribbean. Due to its offshore location and complex aftershock distribution, its source kinematics remain poorly constrained. This active sequence illuminated a complex set of previously unrecognized structures that indicate multiple causative faults may have slipped during its rupture. Here, we utilize seismic and geodetic observations to enhance model resolution, estimate the finite slip of the mainshock, and test a multi-segment, geologically realistic fault geometry. Our refined model finds a lower rupture velocity and longer rise times than typical for an event of this magnitude. This indicates a slow-evolving rupture process that resembles characteristics of a tsunami earthquake. Although this normal/strike-slip faulting event was not tsunamigenic, these qualities, if pervasive for this region, have important implications for future seismic monitoring and hazards in southwestern Puerto Rico.

Puerto Rico↗
USGS2025

Quantitative subsurface characterization illuminates the origin of the Quaternary Mississippi River Valley alluvial aquifer

The Mississippi River Valley alluvial aquifer (MRVA) is vital to U.S. food security and global agricultural supply. However, quantitative understanding of its Quaternary origin, architecture, and hydrologic function remains incomplete. Here we develop a three-dimensional hydrostratigraphic model to characterize the deposition of clay and silt, fine-medium sands, and graveliferous sands using lithologic data from 75,000 boreholes compiled across the Lower Mississippi Valley and a geostatistical method—interval kriging. We find that cyclic glacial entrenchments, evidenced by remnants of pre-Wisconsinan postglacial sediments, alongside geodynamic activities shaped the MRVA basal configuration. Stratal weakening from faulting and salt diapirism enhanced glacial incision and thereby produced abrupt aquifer thickening. We demarcate the top of graveliferous sands as the regional marker of the Pleistocene-Holocene transition. The MRVA hydrostratigraphy reveals hydrologic function and geologic controls on groundwater storage and quality, advancing the assessment of aquifer sustainability under a changing climate, with implications for alluvial aquifers globally.

Arkansas, Illinois, Kentucky, Louisiana, Mississip↗
USGS2024

SUTRA— A code for simulation of saturated-unsaturated, variable-density groundwater flow with solute or energy transport—Documentation of the version 4.0 enhancements—Freeze-thaw capability, saturation and relative-permeability relations, spatially varying properties, and enhanced budget and velocity outputs

Version 4.0 of the Saturated-Unsaturated Transport (SUTRA) software code provides the capability to simulate the freezing and thawing of groundwater during energy transport simulations under saturated and unsaturated conditions. In addition to the types of hydrogeologic processes that SUTRA has been able to simulate in the past, this version can be used to study the effects of the freeze-thaw process on the flow and energy dynamics of hydrogeologic systems. The freeze-thaw simulation capability accounts for the latent heat of fusion and allows thermal property values to vary with changing total-water saturation, liquid-water saturation, and ice saturation. It allows the effective permeability of the porous medium to change as a result of freezing and thawing. This version also provides several user-selectable relations for the dependence of total-water saturation on fluid pressure, the dependence of liquid-water saturation on temperature during freezing and thawing, and the dependence of relative permeability on liquid saturation, as well as three user-selectable formulae for defining the bulk thermal conductivity of a mixture of solid grains, liquid water, ice, and air. For unsaturated simulations without freezing, the selectable total-water saturation relations eliminate the need for the user to program these and their associated relative-permeability functions, as had been required in previous SUTRA versions. Optional nonlinear dependence of fluid density on temperature, which covers the range from supercooled (about −50 degrees Celsius) to superheated (about 400 degrees Celsius), is also provided. Additionally, this version makes it possible to spatially vary parameters that, in previous versions of SUTRA, were required to be spatially uniform: solid-matrix properties, adsorption parameters, and parameters for production of solute mass or energy. Spatial variation is also allowed for the newly included freeze-thaw process parameters. Additional enhancements provide (1) output of water-mass and energy budgets that include values of all component terms in the governing balance equations, and (2) output of Darcy velocities (fluid fluxes), in addition to the velocity output provided by previous SUTRA versions. These enhanced outputs allow fuller interpretation of simulation results, especially for freeze-thaw phenomena. The set of processes simulated by this version of SUTRA are useful for studying a wide range of hydrogeologic system types, conditions, and questions. For cryohydrogeologic simulations, however, this version of the code is limited in that (1) it does not simulate thermomechanical effects of freeze-thaw, (2) pressure changes due to water density change during freezing are neglected, (3) ice saturation cannot exceed the initial porosity of the simulated medium, and (4) cryosuction, the migration of liquid water toward freezing fronts, is neglected. Furthermore, this version does not account for air flow or for water vaporization and sublimation under unsaturated conditions.

Techniques and Methods↗
USGS2026

Multiple-well monitoring site adjacent to the Midway- Sunset and Buena Vista Oil Fields, Kern County, California

Groundwater quality in and around oil fields in the Southern San Joaquin Valley is of interest to many California residents that rely heavily on groundwater for domestic, commercial, and agricultural use. To help assess the effects of historical oil-field activities and natural geologic sources on groundwater near the southwest margins of the Kern County Groundwater Subbasin, a multiple-well monitoring site was installed near the administrative boundary between the Midway-Sunset and Buena Vista Oil Fields in Kern County, California. The installation of the Midway-Sunset Buena Vista multiple-well monitoring site (MSBV) supports regional analysis of the relations of oil and gas sources to groundwater quality by providing information about the geology, hydrology, geophysical properties, and water quality of the alluvial and upper Tulare aquifers in areas where groundwater data were limited. Data collected from the site included drill cuttings, whole core samples, sidewall core samples, mud-gas analysis, borehole geophysical logs, depth to water measurements, and water quality samples. Whole cores were scanned using dual energy computed tomography. Subsamples of selected cores were analyzed for density, porosity, specific retention, and bulk minerology. Thin sections of the subsamples were prepared, photographed, and examined. Two samples were analyzed using scanning electron microscope technology to examine the microporosity of diatomite laden sediment. Instrumentation installed in the wells collect hourly depth to water measurements. Analysis of the data show there is 355 feet of alluvium overlying the Tulare Formation at the well site. The contact between the two formations is an aquitard resulting in a perched aquifer in the alluvium and unconfined aquifer in the Tulare Formation. The alluvium is more heterogenous and finer grained than the Tulare Formation resulting in markedly higher porosity in the alluvium compared to the Tulare Formation. Higher specific retention observed in the alluvium is attributed to the finer grained sediment and greater abundance of reworked diatomite (as represented by opal-CT [cristobalite-tridymite]) compared to the Tulare Formation. Total dissolved solids (TDS) approached or exceeded 10,000 milligrams per liter (mg/L) in the alluvium from approximately 176 to 242 feet below land surface and at the top of the Amnicola clay at approximately 670 feet below land surface within the Tulare Formation. Elevated TDS, chloride, and boron concentrations in the alluvium and on top of the Amnicola clay likely reflect groundwater that is mixed with oil-field water. Water chemistry and modern-aged groundwater in the alluvial monitoring well (MSBV #3) are consistent with the oil-field water in the alluvium being derived from documented historical surface disposal of oil-field water upslope (northwest) of the site. Water chemistry and pre-modern groundwater age in the deeper Tulare monitoring well (MSBV #1) on top of the Amnicola clay are consistent with oil-field fluids derived from upslope natural geologic sources or old oil wells that leak in the subsurface. Shallow groundwater in the Tulare (MSBV #2) is not affected by mixing with oil-field sources.

EarthArXiv↗
USGS2024

Analyzing spatial distributions and alignments of pitted cone features in Utopia Planitia on Mars

Martian geomorphology and surface features provide links to understanding past geologic processes such as fluid movement, local and regional tectonics, and feature formation mechanisms. Pitted cones are common features in the northern plains basins of Mars. They have been proposed to have formed from upwelling volatile-rich fluids, such as magma or water-sediment slurries. In this study, we map the spatial distributions of pitted cone features across the Utopia Planitia (UP) basin. Using the Average Nearest Neighbor technique, we find that pitted cone features appear to be clustered across the basin, occurring in a narrow band around the circumferential rim of UP. Additionally, we find that pitted cone features also appear to be aligned in chains that are sub-parallel with the basin margin. Parallel bands of cones generally follow elevation contours of the UP basin, which suggests elevation or a correlated factor plays a major role in pitted cone and cone chain formation. We propose that pitted cones and cone chains may be related to vertical fractures formed around the UP basin rim from subsidence of infilling basin material.

Icarus↗
USGS2026

Estimating paleotemperature using stable isotopes of soil-formed phyllosilicates from paleosols: A review

Fossilized soils, or paleosols, contain soil-formed phyllosilicates whose stable isotopic compositions may be used to calculate paleotemperature and thus reconstruct ancient terrestrial environments. Though paleosols are common in the geologic record, the use of phyllosilicates as paleotemperature proxies is limited in the literature owing to difficulties with selecting optimal paleosols, isolation from non-clay minerals and organic materials, mixtures of phyllosilicates in natural samples, wide variations of chemical compositions for phyllosilicates, and limited to undefined equilibrium fractionation factors between phyllosilicates-water. Here, we address these challenges by examining and comparing methods used for sample selection, mineral isolation, pretreatments, mineral identification, conventional and developing methods for oxygen and hydrogen isotopic analyses, and determination of phyllosilicate-water equilibrium fractionation factors, concluding with recommendations for best approaches for paleotemperature estimation. Additionally, we discuss how to identify and avoid detrital phyllosilicates, the impacts of diagenesis, comparison of stable isotope and non-isotope paleosol paleotemperature proxies, and challenges and opportunities for broadly using paleosols as paleoclimate archives. With ongoing efforts to refine this multi-faceted paleotemperature approach, the stable isotope geochemistry of soil-formed phyllosilicates continues to be an invaluable proxy system, enhancing our understanding of terrestrial paleoenvironments and paleoclimate.

Kansas↗
USGS2025

A soil velocity model for improved ground motion simulations in the U. S. Pacific Northwest

Near-surface seismic velocity structure may significantly impact the intensity, duration, and frequency content of ground shaking during an earthquake. In this study, we compile 649 shear wave velocity (Vs) profiles throughout the U.S. Pacific Northwest and southern British Columbia (PNW) and use these measured profiles to develop a representative soil velocity model for four major Holocene soil provinces: Puget Lowlands, Willamette Valley, fill and alluvium, and `other' soils. The resulting soil velocity model shows good agreement to measured data for a wide range of site conditions, with variability between different geologic domains reflecting fundamental differences in depositional environments. We then show that using this regional soil velocity model in simulations of the 2001 M6.8 Nisqually, Washington earthquake improves the fit to observed high-frequency (≥ 0.5 Hz) ground motions in the Puget Sound region compared to simulations that do not incorporate shallow (≤ 200 m) seismic velocity structure. Overall, this work shows that incorporating localized soil velocity profiles into seismic velocity models is important for accurately estimating high-frequency ground motion and regional seismic hazard in earthquake simulations. Future earthquake simulations and hazard studies in the PNW could incorporate these soil velocity profiles to capture the region's distinct site response characteristics.

Washington↗
USGS2026

Testing characteristic magnitude distributions in modern PSHA models

The characteristic magnitude distribution hypothesis predicts a higher rate of large earthquakes than a Gutenberg–Richter extrapolation of the small‐earthquake rate would imply. Characteristic magnitude distributions have been commonly applied to faults in probabilistic seismic hazard analysis (PSHA), and in modern models they can emerge from the way short‐term seismicity constraints are combined with long‐term geologic and geodetic constraints. We test the characteristic magnitude distribution hypothesis by comparing the fault‐based magnitude distributions from the 2023 update to the National Seismic Hazard Model (NSHM23) in the Western United States with observed seismicity over the past 93 yr. We find that observed magnitude distributions fall outside the model‐predicted confidence bounds in regions where NSHM23 produces characteristic magnitude distributions: in these regions, the model predicts higher rates of large earthquakes than are observed. An analysis of the earlier California model (Uniform California Earthquake Rupture Forecast, version 3) also reveals discrepancies between the modeled and observed magnitude distributions. In addition, we find that observed magnitude distributions near modeled faults are not significantly different from those in background regions. These results challenge the prevalence of characteristic magnitude distributions in fault‐based seismic hazard models and call for a reassessment of how disparate data sets are integrated in PSHA.

western United States↗
USGS2024

Neotectonic mapping of Puerto Rico

Puerto Rico is part of the Puerto Rico-Virgin Islands microplate, along the Caribbean–North American plate boundary between the Puerto Rico trench subduction zone and the Muertos Trough incipient subduction zone. Despite recent seismicity and geodetically constrained deformation of ~3 mm/yr of left-lateral shear across the island, Quaternary fault locations remain largely uncertain. Preservation of recent faulting in the landscape is masked by distributed faulting, high weathering rates of the tropical climate, steep topography, frequent landsliding, and extensive agriculture and urbanization along coastlines and river valleys. We present remote neotectonic mapping of historical aerial imagery from the 1930s-60s and <1-m lidar topography, integrated with field observations, to create an updated active fault map of Puerto Rico. We focus on faults that offset younger geomorphic surfaces, with ages estimated by geologic mapping, OSL and radiocarbon dating, and morphologic interpretations. We present new evidence for Quaternary activity on seven faults, including the South Lajas, Salinas, Punta Montalva, Great Southern Puerto Rico, Cerro Goden, Parguera, and San Marcos faults. We find that active faulting occurs preferentially along the southern and western coasts and does not always spatially coincide with preexisting bedrock faults, possibly reflecting partial reactivation of older faults in the modern strain field.

Puerto Rico↗
USGS2025

Probing lower-crustal fault properties with frequency-dependent tidal tremor triggering

The way seismicity responds to periodic stress perturbations offers crucial insights into the processes that can trigger an earthquake. Laboratory and theoretical analyses have shown that the period of imposed forcing and source properties affect the sensitivity to triggering, but frequency-dependent triggering of tectonic faults is poorly understood. The rate of low-frequency earthquakes (LFEs) near Parkfield, California has been found to be strongly correlated with solid earth tides. Tidal forcing acts over multiple frequencies, and the sensitivity to tidal triggering of LFEs therefore provides a unique opportunity to probe the physics of earthquake triggering and underlying fault properties. Here, we find that the response of LFEs to solid earth tides at diurnal and semi-diurnal frequencies is highly variable but spatially coherent along the San Andreas Fault. Using rate-state friction modeling, we find that the variation of the amplitude of tidal modulation is mainly affected by the spatial variation of the background effective normal stress, whereas the spatially varied tidal modulation at diurnal and semi-diurnal frequencies is mainly affected by the fault frictional property. The spatial variations of the LFE response reveal a heterogeneous lower-crustal geologic structure and complex physical faulting processes below the rupture zone of eventual great earthquakes.

California↗
USGS2024

A great tsunami earthquake component of the 1957 Aleutian Islands earthquake

The great 1957 Aleutian Islands earthquake ruptured ∼1200 km of the plate boundary along the Aleutian subduction zone and produced a destructive tsunami across Hawaiʻi. Early seismic and tsunami analyses indicated that large megathrust fault slip was concentrated in the western Aleutian Islands, but tsunami waves generated by slip in the west cannot explain the large observed runup in Hawaiʻi far to the southeast. Recently mapped 1957 geologic deposits on eastern Aleutian Islands suggest occurrence of very large nearby slip. Jointly modeling tsunami runup along the eastern Aleutian and Hawaiian Islands together with tide gauge recordings across the Pacific resolves 12-26 m shallow slip along 600 km of the eastern Aleutian Islands in addition to modest, deeper western slip inferred from seismic records. The eastern near-trench slip results in an M W 8.3-8.6 tsunami earthquake component of the M W 8.6-8.8 rupture, comparable in size to the adjacent 1946 Aleutian tsunami earthquake to the east. The reexamination of the 1957 rupture confirms the tsunami hazards posed by the eastern Aleutian subduction zone to Hawaiʻi and lays the groundwork for investigation of large prehistoric earthquakes through modeling tsunami runup inferred from stratigraphic observations to constrain their rupture processes.

Alaska↗
USGS2024

Unscrambling the Proterozoic supercontinent record of northeastern Washington State, USA

The time interval from Supercontinent Nuna assembly in the late Paleoproterozoic to Supercontinent Rodinia breakup in the Neoproterozoic is considered by some geologists to comprise the “Boring Billion,” an interval possibly marked by a slowdown in plate tectonic processes. In northeastern Washington State, USA, similar to much of western Laurentia, early workers generally thought the tectonostratigraphic framework of this interval of geologic time consisted of two major sequences, the (ca. 1480–1380 Ma) Mesoproterozoic Belt Supergroup and unconformably overlying (<720 Ma) Neoproterozoic Windermere Supergroup. However, recent research indicates that strata considered by early workers as Belt Supergroup equivalents are actually younger, and a post-Belt, pre-Windermere record is present within the <1360 Ma Deer Trail Group and <760 Ma Buffalo Hump Formation. Thus, the northeastern Washington region perhaps comprises the most complete stratigraphic record of the “Boring Billion” time interval in the northwestern United States and holds important insights into global Proterozoic supercontinent tectonic processes. In light of these exciting developments, this field guide will address the early historic economic geology and original mapping of these Proterozoic sequences in the northeastern Washington region, and from that foundation explore more recent isotopic provenance data and their regional to global context. Finally, the guide will end with a discussion of remaining questions with a goal of stimulating interest in these relatively understudied, yet important, rocks.

Washington↗
USGS2026

In-situ geochronology using LA-ICP-MS/MS: Application of the Lu-Hf system in carbonate, apatite and fluorite

Geochronology is a fundamental tool for reconstructing earth history and constraining the timing of ore deposit formation. Traditionally, U-rich minerals like zircon, titanite, monazite and apatite have been analysed to determine the timing of mineralization and alteration events. However, not all deposits or alteration assemblages contain these minerals, and the U-Pb system can be disturbed due to open system behaviour. We present a methodology for obtaining in-situ Lu-Hf dates from various minerals to demonstrate the potential for dating ore deposits that lack U-rich minerals. Carbonate, apatite and fluorite minerals from different tectonic settings and geological environments were analysed. We acquired Lu-Hf and REE (rare earth element) data from carbonate minerals from a carbonatite orebody and dike samples from the Mountain Pass REE carbonatite deposit in California, USA. We also tested a ‘double-dating’ method, where U-Th-Pb dates and Lu-Hf dates were obtained from the same analysis of apatite from rocks in the Michigan’s Great Lakes Tectonic Zone. Preliminary results for Lu-Hf dating of fluorite from carbonatite rocks in the Lemitar Mountains of New Mexico are also included. The analytical methodology shows promising results in each of these cases where there is sufficient parent Lu and U and measurable daughter Hf and Pb respectively.

Conference Paper↗