SEARCH · USGS Science

Results for “Water International”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57Linked to original sources

USGS1999

Analysis of difference between direct and geodetic mass balance measurements at South Cascade Glacier, Washington

Net mass balance has been measured since 1958 at South Cascade Glacier using the ‘direct method,’ e.g. area averages of snow gain and firn and ice loss at stakes. Analysis of cartographic vertical photography has allowed measurement of mass balance using the ‘geodetic method’ in 1970, 1975, 1977, 1979–80, and 1985–97. Water equivalent change as measured by these nearly independent methods should give similar results. During 1970–97, the direct method shows a cumulative balance of about −15 m, and the geodetic method shows a cumulative balance of about −22 m. The deviation between the two methods is fairly consistent, suggesting no gross errors in either, but rather a cumulative systematic error. It is suspected that the cumulative error is in the direct method because the geodetic method is based on a non‐changing reference, the bedrock control, whereas the direct method is measured with reference to only the previous year's summer surface. Possible sources of mass loss that are missing from the direct method are basal melt, internal melt, and ablation on crevasse walls. Possible systematic measurement errors include under‐estimation of the density of lost material, sinking stakes, or poorly represented areas.

Washington↗

USGS2011

Developing an operational rangeland water requirement satisfaction index

Developing an operational water requirement satisfaction index (WRSI) for rangeland monitoring is an important goal of the famine early warning systems network. An operational WRSI has been developed for crop monitoring, but until recently a comparable WRSI for rangeland was not successful because of the extremely poor performance of the index when based on published crop coefficients ( K c ) for rangelands. To improve the rangeland WRSI, we developed a simple calibration technique that adjusts the K c values for rangeland monitoring using long-term rainfall distribution and reference evapotranspiration data. The premise for adjusting the K c values is based on the assumption that a viable rangeland should exhibit above-average WRSI (values >80%) during a normal year. The normal year was represented by a median dekadal rainfall distribution (satellite rainfall estimate from 1996 to 2006). Similarly, a long-term average for potential evapotranspiration was used as input to the famine early warning systems network WRSI model in combination with soil-water-holding capacity data. A dekadal rangeland WRSI has been operational for east and west Africa since 2005. User feedback has been encouraging, especially with regard to the end-of-season WRSI anomaly products that compare the index's performance to ‘normal’ years. Currently, rangeland WRSI products are generated on a dekadal basis and posted for free distribution on the US Geological Survey early warning website at http://earlywarning.usgs.gov/adds/

International Journal of Remote Sensing↗

USGS1999

An evaluation of six internal anchor tags for tagging juvenile striped bass

Six types of internal anchor tags were compared for retention, legibility, and durability in tagging juvenile (age-0) striped bass Morone saxatilis . Tank-reared striped bass (120–200 mm total length) were tagged with coded wire tags and one of six types of internal anchor tags (500 fish each tag type and two groups of controls). The types of internal anchor tags used were as follows: Floy streamer FM-84 (currently in use by the U. S. Fish and Wildlife Service); Floy streamer with protective sheath (modified FM-84), Floy streamer with a monofilament leader and sheath (FM-89SL), modified Hallprint T687, Hallprint monofilament IEX WAD, and Hallprint T-bar IEX NOR. The Hallprint T-bar IEX NOR and the Floy FM-84 tags caused significantly higher 2-week and 6-month mortality. Final fish total length was different among tag types and tagger groups; however, final fish size was not correlated with either variable after adjusting for initial fish size. Tags were also mounted on polyvinyl chloride pipes and exposed to freshwater, brackish-water, and saltwater environments for 1 year. The brackish-water environment was harsher than either freshwater or salt water and had a greater density of fouling organisms. Legibility was poor for the Floy streamer, and Floy tag sheaths sometimes moved and obscured the printing. Failure rates (printing loss or tag loss) for the Floy tags (36%) were about six times higher than the Hallprint tags (6%). An analysis of 369 anchor tags returned by striped bass fishers indicated that the tag was illegible when more than 43 printed characters were lost and that illegibility increased over time. None of the tags tested was considered appropriate for tagging juvenile striped bass, but changes in tag design, material, and insertion could improve tag retention and survival.

North American Journal of Fisheries Management↗

USGS2001

Methods of analysis by the U.S. Geological Survey Organic Geochemistry Research Group—Determination of glyphosate, aminomethylphosphonic acid, and glufonsinate in water using online solid-phase extraction and high-performance liquid chromatography/mass spectrometry

An analytical method for the determination of glyphosate, its principal degradation compound, aminomethylphosphonic acid (AMPA), and glufosinate in water with varying matrices has been developed. Four different sample matrices fortified at 0.2 and 2.0 μg/L (micrograms per liter) were analyzed using precolumn derivatization with 9-fluorenylmethylchloroformate (FMOC). After derivatization, cleanup and concentration were accomplished using automated online solid-phase extraction followed by elution with the mobile phase allowing for direct injection into a liquid chromatograph/mass spectrometer (LC/MS). Analytical conditions for MS detection were optimized, and quantitation was carried out using the following representative ions: 390 and 168 for glyphosate; 332, 110, and 136 for AMPA; and 402, 180, and 206 for glufosinate. Matrix effects were minimized by utilizing standard addition for quantification and an isotope-labeled glyphosate (2- 13 C, 15 N) as the internal standard. Method detection limits (MDLs) were 0.084 μg/L for glyphosate, 0.078 μg/L for AMPA, and 0.057 μg/L for glufosinate. The method reporting limits (MRLs) were set at 0.1 μg/L for all three compounds. The mean recovery values ranged from 88.0 to 128.7 percent, and relative standard deviation values ranged from 5.6 to 32.6 percent.

Open-File Report↗

USGS2003

The strength and rheology of methane clathrate hydrate

Methane clathrate hydrate (structure I) is found to be very strong, based on laboratory triaxial deformation experiments we have carried out on samples of synthetic, high-purity, polycrystalline material. Samples were deformed in compressional creep tests (i.e., constant applied stress, ??), at conditions of confining pressure P = 50 and 100 MPa, strain rate 4.5 ?? 10-8 ??? ?? ??? 4.3 ?? 10-4 s-1, temperature 260 ??? T ??? 287 K, and internal methane pressure 10 ??? PCH4 ??? 15 MPa. At steady state, typically reached in a few percent strain, methane hydrate exhibited strength that was far higher than expected on the basis of published work. In terms of the standard high-temperature creep law, ?? = A??ne-(E*+PV*)/RT the rheology is described by the constants A = 108.55 MPa-n s-1, n = 2.2, E* = 90,000 J mol-1, and V* = 19 cm3 mol-1. For comparison at temperatures just below the ice point, methane hydrate at a given strain rate is over 20 times stronger than ice, and the contrast increases at lower temperatures. The possible occurrence of syntectonic dissociation of methane hydrate to methane plus free water in these experiments suggests that the high strength measured here may be only a lower bound. On Earth, high strength in hydrate-bearing formations implies higher energy release upon decomposition and subsequent failure. In the outer solar system, if Titan has a 100-km-thick near-surface layer of high-strength, low-thermal conductivity methane hydrate as has been suggested, its interior is likely to be considerably warmer than previously expected.

Journal of Geophysical Research B: Solid Earth↗

USGS2013

Fine-scale delineation of the location of and relative ground shaking within the San Andreas Fault zone at San Andreas Lake, San Mateo County, California

The San Francisco Public Utilities Commission is seismically retrofitting the water delivery system at San Andreas Lake, San Mateo County, California, where the reservoir intake system crosses the San Andreas Fault (SAF). The near-surface fault location and geometry are important considerations in the retrofit effort. Because the SAF trends through highly distorted Franciscan mélange and beneath much of the reservoir, the exact trace of the 1906 surface rupture is difficult to determine from surface mapping at San Andreas Lake. Based on surface mapping, it also is unclear if there are additional fault splays that extend northeast or southwest of the main surface rupture. To better understand the fault structure at San Andreas Lake, the U.S. Geological Survey acquired a series of seismic imaging profiles across the SAF at San Andreas Lake in 2008, 2009, and 2011, when the lake level was near historical lows and the surface traces of the SAF were exposed for the first time in decades. We used multiple seismic methods to locate the main 1906 rupture zone and fault splays within about 100 meters northeast of the main rupture zone. Our seismic observations are internally consistent, and our seismic indicators of faulting generally correlate with fault locations inferred from surface mapping. We also tested the accuracy of our seismic methods by comparing our seismically located faults with surface ruptures mapped by Schussler (1906) immediately after the April 18, 1906 San Francisco earthquake of approximate magnitude 7.9; our seismically determined fault locations were highly accurate. Near the reservoir intake facility at San Andreas Lake, our seismic data indicate the main 1906 surface rupture zone consists of at least three near-surface fault traces. Movement on multiple fault traces can have appreciable engineering significance because, unlike movement on a single strike-slip fault trace, differential movement on multiple fault traces may exert compressive and extensional stresses on built structures within the fault zone. Such differential movement and resulting distortion of built structures appear to have occurred between fault traces at the gatewell near the southern end of San Andreas Lake during the 1906 San Francisco earthquake (Schussler, 1906). In addition to the three fault traces within the main 1906 surface rupture zone, our data indicate at least one additional fault trace (or zone) about 80 meters northeast of the main 1906 surface rupture zone. Because ground shaking also can damage structures, we used fault-zone guided waves to investigate ground shaking within the fault zones relative to ground shaking outside the fault zones. Peak ground velocity (PGV) measurements from our guided-wave study indicate that ground shaking is greater at each of the surface fault traces, varying with the frequency of the seismic data and the wave type (P versus S). S-wave PGV increases by as much as 5–6 times at the fault traces relative to areas outside the fault zone, and P-wave PGV increases by as much as 3–10 times. Assuming shaking increases linearly with increasing earthquake magnitude, these data suggest strong shaking may pose a significant hazard to built structures that extend across the fault traces. Similarly complex fault structures likely underlie other strike-slip faults (such as the Hayward, Calaveras, and Silver Creek Faults) that intersect structures of the water delivery system, and these fault structures similarly should be investigated.

California↗

USGS2025

Public, bottled, and private drinking water: Shared contaminant-mixture exposures and effects challenge

BACKGROUND: Humans are primary drivers of environmental contaminant exposures worldwide, including in drinking-water (DW). In the United States (US), point-of-use DW (POU DW) is supplied via private tapwater (TW, predominantly private wells), public-supply TW, and bottled water (BW). Differences in management, monitoring, and messaging and lack of directly intercomparable exposure data influence the actual and perceived quality and safety of different DW supplies and directly impact consumer decision making. OBJECTIVES: The purpose of this paper is to provide a meta-analysis (quantitative synthesis) of POU DW contaminant mixture exposures and corresponding potential human health effects of private-TW, public-TW, and BW by aggregating exposure results and harmonizing apical health benchmark weighted and bioactivity weighted effects predictions across previous studies by this research group. DISCUSSION: Simultaneous exposures to multiple inorganic and organic contaminants of known or suspected human-health concern are common across all three DW supplies, with substantial variability observed in each and no systematic difference in predicted cumulative risk between supply chains. Differences in contaminant or contaminant class exposures (e.g., trace metals, disinfection byproducts), with important implications for DW quality improvements, were observed and attributed to corresponding differences in regulation and compliance monitoring. CONCLUSION: The results indicate that human-health risks from contaminant exposures are common to and comparable in all three DW supplies, including BW. Importantly, this study’s target analytical coverage, which exceeds that currently feasible for water purveyors or homeowners, nevertheless is a substantial underestimation of the full breadth of contaminant mixtures in the environment and potentially present in DW. Thus, the results emphasize the need for improved understanding of the adverse human-health implications of long-term exposures to low level inorganic /organic contaminant mixtures across all three distribution pipelines and do not support commercial messaging of BW as a systematically safer alternative to public-TW. Regardless of the supply, increased engagement in source-water protection and drinking-water treatment, including consumer point of use treatment, is necessary to reduce risks associated with long-term DW contaminant exposures, especially in vulnerable populations, and to reduce environmental waste and plastics contamination.

Environment International↗

USGS2012

USGS Environmental health science strategy: providing environmental health science for a changing world: Public review release

America has an abundance of natural resources. We have bountiful clean water, fertile soil, and unrivaled national parks, wildlife refuges, and public lands. These resources enrich our lives and preserve our health and wellbeing. These resources have been maintained because of our history of respect for their value and an enduring commitment to their vigilant protection. Awareness of the social, economic, and personal value of the health of our environment is increasing. The emergence of environmentally driven diseases caused by environmental exposure to contaminants and pathogens is a growing concern worldwide. New health threats and patterns of established threats are affected by both natural and anthropogenic changes to the environment. Human activities are key drivers of emerging (new and re-emerging) health threats. Societal demands for land and natural resources, a better quality of life, improved economic prosperity, and the environmental impacts associated with these demands will continue to increase. Natural earth processes, climate trends, and related climatic events will add to the environmental impact of human activities. These environmental drivers will influence exposure to disease agents, including viral, bacterial, prion, and fungal pathogens, parasites, natural earth materials, toxins and other biogenic compounds, and synthetic chemicals and substances. The U.S. Geological Survey (USGS) defines environmental health science broadly as the interdisciplinary study of relations among the quality of the physical environment, the health of the living environment, and human health. The interactions among these three spheres are driven by human activities, ecological processes, and natural earth processes; the interactions affect exposure to contaminants and pathogens and the severity of environmentally driven diseases in animals and people. This definition provides USGS with a framework for synthesizing natural science information from across the Bureau and providing it to environmental, natural resource, agricultural, and public-health managers. The USGS is a Federal science agency with a broad range of natural science expertise relevant to environmental health. USGS provides scientific information and tools as a scientific basis for management and policy decision making. USGS specializes in science at the environment-health interface, by characterizing the processes that affect the interaction among the physical environment, the living environment, and people, and the resulting factors that affect ecological and human exposure to disease agents. This report describes a 10-year strategy that encompasses the portfolio of USGS environmental health science. It summarizes national environmental health priorities that USGS is best suited to address, and will serve as a strategic framework for USGS environmental health science goals, actions, and outcomes for the next decade. Implementation of this strategy is intended to aid coordination of USGS environmental health activities and to provide a focal point for disseminating information to stakeholders. The "One Health" paradigm advocated by the World Health Organization (WHO, 2011), and the American Veterinary Medicine Association (AVMA, 2008), among others, is based on a general recognition that the health of humans, animals, and the environment are inextricably linked. Thus, successful efforts to protect that health will require increased interdisciplinary research and increased communication and collaboration among the broader scientific and health community. This strategy is built upon that paradigm. The vision, mission, and five cornerstone goals of the USGS Environmental Health Science Strategy were developed with significant input from a wide range of stakeholders. Vision - The USGS is a premier source of the environmental health science needed to safeguard the health of the environment, fish, wildlife, and people. Mission - The mission of USGS in environmental health science is to contribute scientific information to environmental, natural resource, agricultural, and public-health managers, who use that science to support sound decision making. USGS provides the science to: - Goal 1: Identify, prioritize, and detect contaminants and pathogens of emerging environmental concern. - Goal 2: Reduce the impact of contaminants on the environment, fish, wildlife, and people. - Goal 3: Reduce the impact of pathogens on the environment, fish, wildlife, and people. - Goal 4: Discover the complex interactions and combined effects of exposure to contaminants and pathogens. - Goal 5: Prepare for and respond to environmental impacts and related health threats of natural and anthropogenic disasters. Goals 1 through 4 are intended to provide science to address environmental health threats in a logical order, from informing prevention and preparedness, to supporting systematic management response to environmental health issues. Goal 4 addresses the interaction among contaminants and pathogens, an issue of emerging concern in environmental health science. Goal 5 acknowledges the fact that natural and anthropogenic disasters can cause immediate and prolonged adverse environmental health threats. This strategy proposes that USGS take the following strategic science actions to achieve each of the five goals of this strategy: Goal 1: Identify, prioritize, and detect contaminants and pathogens of emerging environmental concern. - Strategic Science Action 1. - Prioritize contaminants and pathogens of emerging concern to guide research, detection, and management activities. - Strategic Science Action 2. - Conduct surveillance and monitoring to provide early warning of emerging health threats. - Strategic Science Action 3. - Develop approaches and tools that identify vulnerable environmental settings, ecosystems, and species. Goal 2: Reduce the impact of contaminants on the environment, fish, wildlife, and people. - Strategic Science Action 1. - Systematically characterize the sources, occurrence, transport and fate of environmental contaminants to guide efforts to manage and mitigate contamination. - Strategic Science Action 2. - Evaluate the threats of contamination on the health of the environment, fish, wildlife, and people, and inform the associated management and protection efforts. - Strategic Science Action 3. - Characterize potential human exposure to support establishment of health-based standards or guidelines and contamination-reduction efforts. Goal 3: Reduce the impact of pathogens on the environment, fish, wildlife, and people. - Strategic Science Action 1. - Determine the biotic and abiotic factors that control the ecology of infectious diseases affecting natural populations of aquatic and terrestrial species and potential transmission to other animals and humans. - Strategic Science Action 2. - Establish how natural and anthropogenic environmental changes affect the distribution and severity of infectious diseases in natural populations of aquatic and terrestrial species and potential transmission to other animals and humans. - Strategic Science Action 3. - Develop surveillance systems to identify changing patterns of disease activity in priority geographic areas. Goal 4: Discover the complex interactions and combined effects of exposure to contaminants and pathogens. - Strategic Science Action 1. - Identify how exposure to one class of disease agents (contaminants or pathogens) can make an organism more susceptible to effects from exposure to the other class of disease agents. - Strategic Science Action 2. - Implement interdisciplinary studies that characterize the effects of combined exposure to pathogens and contaminants. Goal 5: Prepare for and respond to the environmental impacts and related health threats of natural and anthropogenic disasters. - Strategic Science Action 1. - Establish a formal interdisciplinary science capability to rapidly assess the environmental health risks associated with disasters. - Strategic Science Action 2. - Enhance methods to anticipate, prepare for, and identify environmental, ecological, and related health impacts of future disasters. This strategy is one of seven USGS science strategies developed concurrently: - Climate and Land Use Change - Core Science Systems - Ecosystems - Energy and Mineral Resources - Environmental Health - Natural Hazards - Water. This strategy describes how USGS will address the highest priority environmental health issues facing the Nation. The ultimate intended outcome of this science strategy is prevention and reduction of adverse impacts to the quality of the environment, the health of our living resources, and human health. Communication with, and receiving input from, partners and stakeholders regarding their science needs is essential for successful implementation of this strategy. It is incumbent on USGS to reach out to all stakeholders to ensure that USGS efforts are focused on the highest priority environmental health issues and that products are provided in the most timely and usable form to all those who can use them. USGS must reach out to the scientific community, internally and externally, to ensure that our efforts are integrated with and take full advantage of the activities of others.

Open-File Report↗

USGS2008

Radargrammetry on three planets

Synthetic Aperture Radar (SAR) can provide useful images in situations where passive optical imaging cannot, either because the microwaves used can penetrate atmospheric clouds, because active imaging can "see in the dark," or both. We have participated in the NASA Magellan mission to Venus in the 1990s and the current NASA-ESA Cassini-Huygens mission to Saturn and Titan, which have used SAR to see through the clouds of Venus and Titan, respectively, and have developed software and techniques for the production of digital topographic models (DTMs) from radar stereopairs. We are currently preparing for similar radargrammetric analysis of data from the Mini-RF instrument to be carried to the Moon on both the ISRO Chandrayaan-1 and NASA Lunar Reconnaissance Orbiter (LRO) missions later in 2008. These instruments are intended to image the permanently shadowed areas at the lunar poles and even see below the surface to detect possible water ice deposits. In this paper, we describe our approach to radargrammetric topographic mapping, based on the use of the USGS ISIS software system to ingest and prepare data, and the commercial stereoanalysis software SOCET SET (® BAE Systems), augmented with custom sensor models we have implemented, for DTM production and editing. We describe the commonalities and differences between the various data sets, and some of the lessons learned, both radargrammetric and geoscientific.

The International Archives of the Photogrammetry, ↗

USGS2013

Historical methane hydrate project review

In 1995, U.S. Geological Survey made the first systematic assessment of the volume of natural gas stored in the hydrate accumulations of the United States. That study, along with numerous other studies, has shown that the amount of gas stored as methane hydrates in the world greatly exceeds the volume of known conventional gas resources. However, gas hydrates represent both a scientific and technical challenge and much remains to be learned about their characteristics and occurrence in nature. Methane hydrate research in recent years has mostly focused on: (1) documenting the geologic parameters that control the occurrence and stability of gas hydrates in nature, (2) assessing the volume of natural gas stored within various gas hydrate accumulations, (3) analyzing the production response and characteristics of methane hydrates, (4) identifying and predicting natural and induced environmental and climate impacts of natural gas hydrates, and (5) analyzing the effects of methane hydrate on drilling safety. Methane hydrates are naturally occurring crystalline substances composed of water and gas, in which a solid water-‐lattice holds gas molecules in a cage-‐like structure. The gas and water becomes a solid under specific temperature and pressure conditions within the Earth, called the hydrate stability zone. Other factors that control the presence of methane hydrate in nature include the source of the gas included within the hydrates, the physical and chemical controls on the migration of gas with a sedimentary basin containing methane hydrates, the availability of the water also included in the hydrate structure, and the presence of a suitable host sediment or “reservoir”. The geologic controls on the occurrence of gas hydrates have become collectively known as the “methane hydrate petroleum system”, which has become the focus of numerous hydrate research programs. Recognizing the importance of methane hydrate research and the need for a coordinated effort, the U.S. Congress enacted Public Law 106-‐193, the Methane Hydrate Research and Development Act of 2000. This Act called for the Secretary of Energy to begin a methane hydrate research and development program in consultation with other U.S. federal agencies. At the same time a new methane hydrate research program had been launched in Japan by the Ministry of International Trade and Industry to develop plans for a methane hydrate exploratory drilling project in the Nankai Trough. Since this early start we have seen other countries including India, China, Canada, and the Republic of Korea establish large gas hydrate research and development programs. These national led efforts have also included the investment in a long list of important scientific research drilling expeditions and production test studies that have provided a wealth of information on the occurrence of methane hydrate in nature. The most notable expeditions and projects have including the following: -‐Ocean Drilling Program Leg 164 (1995) -‐Japan Nankai Trough Project (1999-‐2000) -‐Ocean Drilling Program Leg 204 (2004) -‐Japan Tokai-‐oki to Kumano-‐nada Project (2004) -‐Gulf of Mexico JIP Leg I (2005) -‐Integrated Ocean Drilling Program Expedition 311 (2005) -‐Malaysia Gumusut-‐Kakap Project (2006) -‐India NGHP Expedition 01 (2006) -‐China GMGS Expedition 01 (2007) -‐Republic of Korea UBGH Expedition 01 (2007) -‐Gulf of Mexico JIP Leg II (2009) -‐Republic of Korea UBGH Expedition 02 (2010) -‐MH-‐21 Nankai Trough Pre-‐Production Expedition (2012-‐2013) -‐Mallik Gas Hydrate Testing Projects (1998/2002/2007-‐2008) -‐Alaska Mount Elbert Stratigraphic Test Well (2007) -‐Alaska Iġnik Sikumi Methane Hydrate Production Test Well (2011-‐2012) Research coring and seismic programs carried out by the Ocean Drilling Program (ODP) and Integrated Ocean Drilling Program (IODP), starting with the ODP Leg 164 drilling of the Blake Ridge in the Atlantic Ocean in 1995, have also contributed greatly to our understanding of the geologic controls on the formation, occurrence, and stability of gas hydrates in marine environments. For the most part methane hydrate research expeditions carried out by the ODP and IODP provided the foundation for our scientific understanding of gas hydrates. The methane hydrate research efforts under ODP-‐IODP have mostly dealt with the assessment of the geologic controls on the occurrence of gas hydrate, with a specific goal to study the role methane hydrates may play in the global carbon cycle. Over the last 10 years, national led methane hydrate research programs, along with industry interest have led to the development and execution of major methane hydrate production field test programs. Two of the most important production field testing programs have been conducted at the Mallik site in the Mackenzie River Delta of Canada and in the Eileen methane hydrate accumulation on the North Slope of Alaska. Most recently we have also seen the completion of the world’s first marine methane hydrate production test in the Nankai Trough in the offshore of Japan. Industry interest in gas hydrates has also included important projects that have dealt with the assessment of geologic hazards associated with the presence of hydrates. The scientific drilling and associated coring, logging, and borehole monitoring technologies developed in the long list of methane hydrate related field studies are one of the most important developments and contributions associated with methane hydrate research and development activities. Methane hydrate drilling has been conducted from advanced scientific drilling platforms like the JOIDES Resolution and the D/V Chikyu, which feature highly advanced integrated core laboratories and borehole logging capabilities. Hydrate research drilling has also included the use of a wide array of industry, geotechnical and multi-‐service ships. All of which have been effectively used to collect invaluable geologic and engineering data on the occurrence of methane hydrates throughout the world. Technologies designed specifically for the collection and analysis of undisturbed methane hydrate samples have included the development of a host of pressure core systems and associated specialty laboratory apparatus. The study and use of both wireline conveyed and logging-‐while-‐drilling technologies have also contributed greatly to our understanding of the in-‐situ nature of hydrate-‐bearing sediments. Recent developments in borehole instrumentation specifically designed to monitor changes associated with hydrates in nature through time or to evaluate the response of hydrate accumulations to production have also contributed greatly to our understanding of the complex nature and evolution of methane hydrate systems. Our understanding of how methane hydrates occur and behave in nature is still growing and evolving – we do not yet know if methane hydrates can be economically produced, nor do we know fully the role of hydrates as an agent of climate change or as a geologic hazard. But it is known for certain that scientific drilling has contributed greatly to our understanding of hydrates in nature and will continue to be a critical source of the information to advance our understanding of methane hydrates.

Report↗

USGS2023

Bottled water contaminant exposures and potential human effects

Bottled water (BW) consumption in the United States and globally has increased amidst heightened concern about environmental contaminant exposures and health risks in drinking water supplies, despite a paucity of directly comparable, environmentally-relevant contaminant exposure data for BW. This study provides insight into exposures and cumulative risks to human health from inorganic/organic/microbial contaminants in BW. Methods BW from 30 total domestic US (23) and imported (7) sources, including purified tapwater (7) and spring water (23), were analyzed for 3 field parameters, 53 inorganics, 465 organics, 14 microbial metrics, and in vitro estrogen receptor (ER) bioactivity. Health-benchmark-weighted cumulative hazard indices and ratios of organic-contaminant in vitro exposure-activity cutoffs were assessed for detected regulated and unregulated inorganic and organic contaminants. Results 48 inorganics and 45 organics were detected in sampled BW. No enforceable chemical quality standards were exceeded, but several inorganic and organic contaminants with maximum contaminant level goal(s) (MCLG) of zero (no known safe level of exposure to vulnerable sub-populations) were detected. Among these, arsenic, lead, and uranium were detected in 67 %, 17 %, and 57 % of BW, respectively, almost exclusively in spring-sourced samples not treated by advanced filtration. Organic MCLG exceedances included frequent detections of disinfection byproducts (DBP) in tapwater-sourced BW and sporadic detections of DBP and volatile organic chemicals in BW sourced from tapwater and springs. Precautionary health-based screening levels were exceeded frequently and attributed primarily to DBP in tapwater-sourced BW and co-occurring inorganic and organic contaminants in spring-sourced BW. Conclusion The results indicate that simultaneous exposures to multiple drinking-water contaminants of potential human-health concern are common in BW. Improved understandings of human exposures based on more environmentally realistic and directly comparable point-of-use exposure characterizations, like this BW study, are essential to public health because drinking water is a biological necessity and, consequently, a high-vulnerability vector for human contaminant exposures.

Environment International↗

USGS1997

Borehole sampling of fracture populations - compensating for borehole sampling bias in crystalline bedrock aquifers, Mirror Lake, Grafton County, New Hampshire

The clustering of orientations of hydraulically conductive fractures in bedrock at the Mirror Lake, New Hampshire fractured rock study site was investigated by comparing the orientations of fracture populations in two subvertical borehole arrays with those mapped on four adjacent subvertical roadcuts. In the boreholes and the roadcuts, the orientation of fracture populations appears very similar after borehole data are compensated for undersampling of steeply dipping fractures. Compensated borehole and pavement fracture data indicate a northeast-striking population of fractures with varying dips concentrated near that of the local foliation in the adjacent rock. The data show no correlation between fracture density (fractures/linear meter) and distance from lithologic contacts in both the boreholes and the roadcuts. The population of water-producing borehole fractures is too small (28 out of 610 fractures) to yield meaningful orientation comparisons. However, the orientation of large aperture fractures (which contains all the producing fractures) contains two or three subsidiary clusters in orientation frequency that are not evident in stereographic projections of the entire population containing all aperture sizes. Further, these subsidiary orientation clusters do not coincide with the dominant (subhorizontal and subvertical) regional fracture orientations.

International Journal of Rock Mechanics and Mining↗

USGS2019

Satellite tracking of hawksbill turtles nesting at Buck Island Reef National Monument, US Virgin Islands: Inter-nesting and foraging period movements and migrations

To conserve imperiled marine species, an understanding of high-density use zones is necessary prior to designing and evaluating management strategies that improve their survival. We satellite-tracked turtles captured after nesting at Buck Island ReefNational Monument (BIRNM), St. Croix, US Virgin Islands to determine habitat-use patterns of endangered adult female hawksbills ( Eretmochelys imbricata ). For 31 turtles captured between 2011 and 2014, switching state-space modeling and home range analyses showed that inter-nesting (IN) core-use areas (i.e., 50% kernel density estimates [KDEs]) were 9.6 to 77.7 km 2 in area, occupied for 21 to 85 days, and in shallow water(21 of 26 centroids > −10 m). The IN zones overlapped with areas both within the protected borders of BIRNM, and outside BIRNM (32% of turtle-tracking days outside during IN). Turtles migrated to their foraging grounds between July and October with path lengths ranging from 52 to 3524 km; foraging areas included 14 countries. Core-use foraging areas (50% KDEs) where turtles took up residence were 6.3 to 95.4 km 2 , occupied for 22 to 490 days, with mean centroid depth − 66 m. Our results show previously unknown habitat-use patterns and highlight concentrated areas of use both within and adjacent to a US protected area during the breeding season. Further, our results clearly demonstrate the need for international conservation to protect hawksbills, as migrating turtles crossed between two and eight different jurisdictions. Our results provide critical spatial and temporal information for managers charged with designing strategies to minimize human impact to and maximize survival for this globally imperiled species.

Virgin Islands↗

USGS2010

Continuous fields of land cover for the conterminous United States using Landsat data: First results from the Web-Enabled Landsat Data (WELD) project

Vegetation Continuous Field (VCF) layers of 30 m percent tree cover, bare ground, other vegetation and probability of water were derived for the conterminous United States (CONUS) using Landsat 7 Enhanced Thematic Mapper Plus (ETM+) data sets from the Web-Enabled Landsat Data (WELD) project. Turnkey approaches to land cover characterization were enabled due to the systematic WELD Landsat processing, including conversion of digital numbers to calibrated top of atmosphere reflectance and brightness temperature, cloud masking, reprojection into a continental map projection and temporal compositing. Annual, seasonal and monthly WELD composites for 2008 were used as spectral inputs to a bagged regression and classification tree procedure using a large training data set derived from very high spatial resolution imagery and available ancillary data. The results illustrate the ability to perform Landsat land cover characterizations at continental scales that are internally consistent while retaining local spatial and thematic detail.

Remote Sensing Letters↗

USGS2018

Tritium deposition in precipitation in the United States, 1953–2012

Tritium is a radioactive isotope of hydrogen (half-life is equal to 12.32 years). Since it is part of the water molecule, tritium can be used to track and date groundwater and surface water when the history of tritium in precipitation and recharge is known. To facilitate that effort, tritium concentrations in precipitation were reconstructed from measurements and correlations for 10 precipitation stations in the continental United States. Using these data, and other data sets and correlations, estimates of tritium concentrations in precipitation from 1953 through 2012 and total tritium deposition from 1953 through 1983 were derived for 2 degrees latitude by 5 degrees longitude quadrangles of the continental United States. For August 1953 through December 1987 correlations were derived from the data of the Ottawa, Canada, station; for estimates after 1987, the Vienna, Austria, station was used. For quadrangles where no precipitation station records are available from measurements or correlations, concentrations were interpolated. The International Atomic Energy Agency has proposed that a correlation with the Vienna, Austria, station, which has been in operation since 1960, be used instead of the Ottawa, Canada, station for the period after 1987. Linear correlations calculated for all stations with the Vienna data are reported. Correlations also have been calculated for each latitude-longitude quadrangle using the estimated concentrations and the measured Vienna data for 1960–87. Because the Vienna, Austria, station is on a different continent, and not subject to the same seasonal weather patterns that affect North American stations, a correlation was obtained for each month individually. This reflects the fact that the North American stations were strongly affected by the input of low-tritium moisture from the south during the summer. The correlated station values were then used with measured Vienna data to obtain estimates of tritium concentrations in precipitation for the period 1988–2012 at each precipitation station and latitude-longitude quadrangles. This approach has two major advantages: (1) it blends the Ottawa correlation with the Vienna correlation to cover the period 1953 to present, and (2) it yields correlation coefficients for each quadrangle that can be used in future years when more data become available from the Vienna, Austria, station. The data, the estimated tritium concentrations derived from the correlations, and the correlation coefficients are provided as spreadsheets and associated comma delimited files in a data release that accompanies this report.

Scientific Investigations Report↗

USGS2000

USGS research on three mid-latitude glaciers

Low- and mid-latitude regions of the earth are home to 80 to 90 percent of the world's population. Because of this, the U.S. Geological Survey (USGS) is conducting a research program to study the geochemistry of precipitation, snow, ice, and runoff samples from mid-latitude glaciers in Kyrghyzstan, Nepal, and the United States, Areas of research, such as ground-water studies, reconstructing paleoclimate records, describing anthropogenic input of chemicals to the environment, and modeling global climate, are important to the well being of the worlds' population and can be supplemented by the collection and chemical analysis of snow and ice cores. Nearly all the constituents that compose snow and ice-core samples contribute vital information, whether it be the microbial communities that flourish in snow, radionuclides present in various amounts in all the samples, or location-specific deposits of mercury and nitrate. This work is hastened by the fact that mid-latitude glaciers, and the information preserved in them, are rapidly disappearing as a result of global warming. Research collaboration for this project includes 12 national and 7 international universities, and 4 government agencies. Funding is provided by the National Science Foundation, the U.S. Department of Energy, and the USGS.

Conference Paper↗

USGS1978

Think Metric

The International System of Units, as the metric system is officially called, provides for a single "language" to describe weights and measures over the world. We in the United States together with the people of Brunei, Burma, and Yemen are the only ones who have not put this convenient system into effect. In the passage of the Metric Conversion Act of 1975, Congress determined that we also will adopt it, but the transition will be voluntary.

Report↗

USGS2015

Getting ocean acidification on decision makers' to-do lists: dissecting the process through case studies

Much of the detailed, incremental knowledge being generated by current scientific research on ocean acidification (OA) does not directly address the needs of decision makers, who are asking broad questions such as: Where will OA harm marine resources next? When will this happen? Who will be affected? And how much will it cost? In this review, we use a series of mainly US-based case studies to explore the needs of local to international-scale groups that are making decisions to address OA concerns. Decisions concerning OA have been made most naturally and easily when information needs were clearly defined and closely aligned with science outputs and initiatives. For decisions requiring more complex information, the process slows dramatically. Decision making about OA is greatly aided (1) when a mixture of specialists participates, including scientists, resource users and managers, and policy and law makers; (2) when goals can be clearly agreed upon at the beginning of the process; (3) when mixed groups of specialists plan and create translational documents explaining the likely outcomes of policy decisions on ecosystems and natural resources; (4) when regional work on OA fits into an existing set of priorities concerning climate or water quality; and (5) when decision making can be reviewed and enhanced.

Oceanography↗