USGS Science⌕ Search

SEARCH · USGS Science

Results for “Philosophical Transactions of the Royal Society B: Biological Sciences”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,687 records · Page 57Linked to original sources
USGS2025

Relating systematic molecular and textural properties of graptolite pyrolyzed via gold tube hydrous pyrolysis: Implications for thermal proxies in lower Paleozoic marine shales

A series of gold tube pyrolysis experiments (72 h, 300–550 °C, 50 MPa) conducted on a graptolite-rich lower Paleozoic marine shale generated pyrolysis residues for a comprehensive evaluation of the molecular and structural variability of three types of graptolite periderm. Organic petrology, Raman spectroscopy, and field emission scanning electron microscopy (FE-SEM) with energy dispersive spectroscopy (EDS) were combined to evaluate the thermal evolution process. The three types of graptolite periderm, namely granular, non-granular, and nodular graptolite, were analyzed by Raman spectroscopy wherein point measurements were obtained after the maceral was identified and the location verified by organic petrology. Distinct thermal evolution pathways among non-granular, granular, and nodular graptolite periderms were recorded. The evolution patterns of the Raman parameters, particularly D1 and G bands, highlight the differences in geochemical composition of the graptolite periderm types and the alteration of molecular structure with increasing thermal maturity. Raman parameters D1 (position of the D1 peak), G-FWHM (full width at half maximum of the G peak), and ratios D1-FWHM/G-FWHM (full width at half maximum of the D1 peak ratioed to G-FWHM) and A D1 /A G (ratio of D1 and G peak intensities) showed effectiveness in assessing thermal maturity. Bireflectance with increasing gold tube pyrolysis temperature followed a hierarchy: non-granular > granular > nodular, reflecting different molecular alignment intensities. Qualitative FE-SEM evaluation showed that fine-grained mineral inclusions (primarily Fe-sulfide as determined via EDS) were associated with the graptolite populations, with granular graptolite containing greater amounts of coarser-grained (e.g., ∼300–1400 nm) mineral inclusions relative to non-granular and nodular graptolite, which contain finer-grained (e.g., ∼100–200 nm) inclusions difficult to resolve with optical microscopy. These findings are investigated to highlight the mechanisms that drive organic matter evolution within graptolite during thermal maturation, as well as to explore some of the limitations of using spectroscopic parameters as thermal maturity proxies.

International Journal of Coal Geology↗
USGS2025

Modeling seawater intrusion along the Alabama coastline using physical and machine learning models to evaluate the effects of multiscale natural and anthropogenic stresses

Seawater intrusion threatens groundwater resources in coastal regions, including southern Baldwin County, Alabama, where the freshwater-saltwater interface dynamics remain poorly understood. To address this gap, this study uses combined physics-based and machine-learning models to quantify seawater intrusion caused by natural (storm surges) and anthropogenic (human activities) perturbations. The long short-term memory network and wavelet analysis were used to assess vertical aquifer vulnerabilities, revealing that the shallow part of the Coastal lowlands aquifer system (CL1) in the southern Baldwin County region is more susceptible to sea level rise and groundwater extraction than deeper aquifers. Based on these findings, a cross-sectional numerical model (physics approach) for the CL1 aquifer was developed to evaluate tidal and storm surge effects, using Tropical Storm Claudette (June 2021) as a case study. Results showed that tidal fluctuations had a minimal impact on the saltwater-freshwater interface location, whereas storm surges caused substantial inland movement, with effects lasting for nine months. The steady-state version of the three-dimensional (3D) physical model predicted seawater intrusion across the entire area, and convolutional neural network-based modeling further validated the model results. The 3D physical model was also applied to a smaller area to assess human impact on the saltwater interface due to two groundwater pumping scenarios (± 50% of the baseline pumping rate). Results revealed that a 50% increase in groundwater withdrawals caused seawater to advance ~ 320 m inland, whereas a 50% reduction led to a ~ 270-meter retreat. This study highlights the vulnerability of Alabama’s shallow coastal aquifers to seawater intrusion due to storm surges and human activities, and demonstrates that combining physics-based models with machine learning approaches can improve groundwater predictions, though its accuracy depends on the availability of site-specific data.

Alabama↗
USGS2024

Cross-fade sampling: Extremely efficient Bayesian inversion for a variety of geophysical problems

This paper introduces cross-fade sampling, a computationally efficient Markov Chain Monte Carlo simulation method that uses a semi-analytical approach to quickly solve Bayesian inverse problems that do not themselves have an analytical solution. Cross-fading is efficient in two ways. First, it requires fewer samples to obtain the same quality simulation of the target probability density function (PDF). Secondly, it is much faster to evaluate the posterior probability of each sample than conventional sampling methods for simulating Bayesian posterior PDFs. Conventional methods require evaluating the prior probability (which describes your a priori constraints) and data likelihood (which describes the fit between the observations and the predictions of the model) for each sample model. However, cross-fading does not require evaluating the data likelihood, meaning that ‘big data’ can be fit with zero additional computational cost. Further, the cross-fading approach can be used to calculate the marginal likelihood associated with a model design, facilitating model comparison and Bayesian model averaging. Topics covered in this paper include derivation of the cross-fade approach and how it can be used to simulate Bayesian posterior PDFs and compute the marginal likelihood, discussion of the class of problems to which cross-fading can be applied (with examples from earthquake statistics, earthquake ground motion modelling, volcanic eruption forecasting, and finite fault slip modelling), demonstration of efficiency relative to existing sampling methods and discussion of how cross-fading can be used to account for prediction errors (i.e. epistemic errors) as part of the geophysical inverse problem.

Geophysical Journal International↗
USGS2025

A 700-year rupture sequence of great eastern Aleutian earthquakes from tsunami modeling of stratigraphic records

Great Aleutian underthrusting earthquakes produced destructive tsunamis impacting Hawaiʻi in 1946 and 1957. Prior modeling of the 1957 tsunami deposit and runup records on eastern Aleutian and Hawaiian Islands jointly with tide-gauge observations across the Pacific Ocean constrained a rupture model with shallow slip up to 26 m along 600 km of the plate boundary. Here we implement this modeling approach to older deposits and show alternating deep and shallow megathrust slip up to 26, 32, and 22 m for great earthquakes along the same segment in the 18 th , 15 th , and 14 th centuries. All three modeled prehistoric Aleutian earthquakes produce tsunami inundation in Hawaiʻi with the most severe, 14 th century event having impacts exceeding the 1957 event. The along-dip variability of these four ruptures spanning seven centuries provides insights on earthquake cycles for engineering design and hazard assessment. The 15 th century and 1957 rupture models provide evidence for recurrence of tsunami earthquakes, which can produce disproportionately large tsunamis for a given moment magnitude due to reduced rigidity in the shallow megathrust. The 14 th and 18 th century events likely ruptured deeper regions that did not slip in 1957, suggesting potential for corresponding deeper failure in the next great eastern Aleutian earthquake.

Alaska, Hawaii↗
USGS2024

Representation of surface-water flows using Gradient-Related Discharge in an Everglades Network

The Everglades Depth Estimation Network interpolates water-level gage data to produce daily water-level elevations for the Everglades in south Florida. These elevations were used to estimate flow vectors (gradients and directions) and volumetric flow rates using the Gradient-Related Discharge in an Everglades Network (GARDEN) application developed by the U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers. Flow rates in both the east-west and north-south directions were computed on a 400-meter square grid using modified parameters in the Manning’s equation. The frictional resistance parameter in the Manning’s equation was calibrated to measured flow rates at coastal creeks fed by Everglades Depth Estimation Network boundary flows. Levees and other features that act as barriers to flow were defined as “no-flow” grid cells where vectors were set to zero. The flow volume magnitudes were calibrated with 2020 daily values of coastal river flows, and verification was performed using 2021 data. Within a given day, the measured coastal river flows fluctuate more than the GARDEN boundary flows because of tidal and wind forcings. Because the GARDEN boundary flows were the upstream water source for the coastal rivers, calibration focused on matching average daily flow volumes rather than daily fluctuations. The Pearson’s correlation coefficient is 0.766 for the 2020 calibration period and 0.566 for the 2021 verification period. Applying GARDEN to periods with hydraulic-control-structure releases allows the propagation of structure flows to be seen in the daily flow-vector maps along with the multiday response of flows farther downgradient. Flow vectors may be overestimated near control structures because of difficulties in resolving the water gradient downstream from the structure. Flow vectors farther from the structure are more accurate than those near the structure.

Florida↗
USGS2025

Cooling perspectives on the risk of pathogenic viruses from thawing permafrost

Climate change is inducing wide-scale permafrost thaw in the Arctic and subarctic, triggering concerns that long-dormant pathogens could reemerge from the thawing ground and initiate epidemics or pandemics. Viruses, as opposed to bacterial pathogens, garner particular interest because outbreaks cannot be controlled with antibiotics, though the effects can be mitigated by vaccines and newer antiviral drugs. To evaluate the potential hazards posed by viral pathogens emerging from thawing permafrost, we review information from a diverse range of disciplines. This includes efforts to recover infectious virus from human remains, studies on disease occurrence in polar animal populations, investigations into viral persistence and infectivity in permafrost, and assessments of human exposure to the enormous viral diversity present in the environment. Based on currently available knowledge, we conclude that the risk posed by viruses from thawing permafrost is no greater than viruses in other environments such as temperate soils and aquatic systems.

mSystems↗
USGS2025

Reflections on a trio of North American earthquakes in 1925

In 1925, three moderately large damaging earthquakes occurred in North America over four months: the 28 February (local time; LT) M 6.2 Charlevoix, 27 June (LT) M 6.6 Montana, and 29 June M 6.5 Santa Barbara earthquakes. The centennial anniversaries of these events motivated this retrospective consideration focused on the ground motions generated by the three events, including a reconsideration of early intensity assignments for the Montana earthquake. At the time, these three earthquakes appeared to support the arguments of some geologists who downplayed the severity of seismic hazard in southern California relative to other parts of the country. Some of the arguments advanced at that time, for example that Los Angeles “has the least to fear from ‘Acts of God’ of any city under the American flag,” ( Hill, 1928 ) sound naïve if not laughable now, but a comparison of well‐constrained shaking distributions for the three earthquakes reveals the dramatic difference in wave propagation efficiency in western versus eastern North America (ENAM), which leads to moderate ENAM events being felt to much larger distances. At M 6.2, the 1925 Charlevoix earthquake was a notably large event in ENAM. This earthquake was the largest event in eastern Canada since 1870 and caused damage in the epicentral region in addition to towns as far away as 200 km, with felt shaking extending over 1000 km. In contrast, felt shaking from the Santa Barbara earthquake barely extended beyond ∼200 km. Compiling published intensity distributions for larger ENAM earthquakes, we show that perceptible earthquake shaking is not uncommon in ENAM over century time scales, but experience with weakly felt shaking may incline people to downplay potential earthquake risk.

California, Montana, Quebec↗
USGS2026

Hydrothermal manganese-oxide mineralization of a carbonate ooze, Samoan hotspot region, South Pacific Ocean

Low-temperature hydrothermal manganese oxides occur throughout the global oceans. However, the hydrothermal replacement of a carbonate ooze by manganese oxides is described here for the first time. The 24 samples dredged from three locations around the Territory of American Samoa in the South Pacific Ocean include six samples with remnant carbonate and volcaniclastic sediments, which we refer to as “low Mn,” and 18 samples in which the mineralization is pervasive and has replaced most original sediment, termed “high Mn.” The 18 high-Mn samples exhibit a mean Mn content of 51 wt.%. Higher Li and Mn contents and lower Fe contents in the high-Mn samples indicate a hydrothermal origin and distinguish these samples from hydrogenetic ferromanganese crusts. Mn-oxide layers are up to 90 mm thick, some with columns to 44 mm long and 10 mm wide, the magnitude of which has not been described previously. Samples are composed of birnessite and 10 Å phyllomanganate minerals. Textures of the thickest Mn layers indicate mineralization below the seabed from ascending fluids during multiple hydrothermal pulses. Mineralization took place by complete to partial replacement and cementation of foraminiferal sediments intermixed with volcaniclastic sediments in varying amounts. Our results highlight the production of carbonate sediment-hosted hydrothermal Mn oxides from multiple hydrothermal sources within the Samoan volcanic chain. The potential extensive distribution on the regional scale of this newly described mineralization process and unique element enrichments raise questions about its broader distribution globally and potential importance to hydrothermal processes, element mass balance, and seabed mineral resources.

Geochemistry, Geophysics, Geosystems↗
USGS2025

Rare earth elements on the Moon

Rare earth elements (REEs) are a scarce but vital resource for our modern economies and lifestyles. Since the late 1990s, China has supplied the vast majority of the world’s refined REEs. Increasing global demand has broadened the search for REE deposits to unconventional places, including the Moon. Although most lunar rocks have very low REE concentrations, Apollo samples showed that one type of lunar rock containing potassium (K), REEs, and phosphorus (P)—known by the acronym KREEP—has high concentrations of REEs. Data from orbiting satellites have identified locations where substantial deposits of KREEP are likely. The viability of mining these deposits depends on the evolution of REE economics, the development of the Earth-Moon infrastructure, and the findings from future lunar mineral exploration missions.

Fact Sheet↗
USGS2026

Methodology for quantitative spatial sensitivity analysis of volcanic geodetic networks

Introduction This report introduces a methodology for assessing the state of the U.S. Geological Survey Volcano Observatories’ geodetic monitoring networks that measure how volcanoes deform or change shape. This new method uses a model-based approach that considers the uniqueness of the instrument environments at each volcano. This report focuses on simplified volcanic sources, is independent of the shape or size of the volcano, or the network geometry, and thus highlights the strengths and potential vulnerabilities of each volcano’s geodetic network in an actionable visual format. This analysis can help observatories to make informed decisions about whether volcanoes have an adequate level of geodetic monitoring and indicate where improvements are needed.

Lassen Peak, Mount Shasta↗
USGS2025

The δ13C signature of dissolved organic and inorganic carbon reveals complex carbon transformations within a salt marsh

Coastal wetlands have high rates of atmospheric CO 2 uptake, which is subsequently respired back to the atmosphere, stored as organic matter within flooded, anoxic soils, or exported to the coastal ocean. Transformation of fixed carbon occurs through a variety of subsurface aerobic and anaerobic microbial processes, and results in a large inventory of dissolved carbon. Carbon source and the roles of aerobic respiration, sulfate reduction, and methane cycling were evaluated within salt marsh peat and the underlying sandy subterranean estuary. There is a large increase in dissolved inorganic carbon (DIC, 7,350 ± 3,900 μmol L −1 ), dissolved organic carbon (DOC, 1,040 ± 1,480 μmol L −1 ) and CH 4 (14.5 ± 33.3 μmol L −1 ) within the marsh porewaters compared to creek waters. Alkalinity production (5,730 ± 2,170 μeq L −1 ) and sulfate removal (1,810 ± 1,970 μmol L −1 ) indicate anaerobic respiration, however, relative contributions from the various decomposition pathways cannot be identified due to overlapping geochemical signatures. The δ 13 C of the DOC (−29.0 ± 3.7‰) and DIC (−11.2 ± 1.1‰) produced within the marsh differed from the bulk soil organic matter δ 13 C (−14.5 ± 0.2‰). We explore a variety of mechanisms that could result in co-occurring depleted δ 13 C-DOC and enriched δ 13 C-DIC compared to the bulk soil organic carbon pool and salt marsh vegetation, including selective mineralization, production of δ 13 C-depleted bacterial biomass, and methane-derived DOC. While important questions remain about carbon cycling pathways, we found evidence of a cryptic methane cycle. Alteration of the δ 13 C of carbon species complicates source attribution in solid and dissolved phases and careful consideration should be used when carbon is partitioned between in situ salt marsh production and external marine and terrestrial sources.

Massachusetts↗
USGS1996

Technique for estimating magnitude and frequency of peak flows in Maryland

A convenient and reliable technique for estimating flood magnitudes is required for effective flood-plain management and for the efficient design of bridges, culverts, embankments, and flood-protection structures. Methods are presented for estimating peak-flow magnitudes of selected frequencies, ranging from 2 to 500 years, for all nontidal drainage basins in Maryland. The methods were developed by generalized least-squares regression techniques using data from 219 gaged basins in and near Maryland. The State is divided into five hydrologic regions: the Appalachian Plateaus and Allegheny Ridges region, the Blue Ridge and Great Valley region, the Piedmont region, the Western Coastal Plain region, and the Eastern Coastal Plain region. These regions correspond to the physiographic provinces of the State, with the exceptions that (1) the Coastal Plain Province is divided into two hydrologic regions, and (2) there is no distinct hydrologic region corresponding to the Valley and Ridge Province as it is divided into its constituent Allegheny Ridges and Great Valley subdivisions. Sets of equations for calculating peak discharges based on physical basin characteristics are provided for each of the regions. Based on the peak-flow equations, methods for estimating peak flows are presented for ungaged and gaged streams in Maryland. The methods and equations are supported by generalized least-squares analysis of basin and flood-frequency characteristics data from 219 drainage basins in and near Maryland. estimates for each of the five regions are calculated using combinations of the fol-lowing basin characteristics: drainage area, forest cover, basin relief, carbonate rock coverage, storage, and runoff-curve number. Drainage area contributes to the estimate in all five study regions. Carbonate rock coverage is used only in the Blue Ridge and Great Valley region. Storage and runoff-curve number are used solely in the Eastern Coastal Plain region. All other basin characteristics are used in two or more regions. Standard errors of estimate for the regression equations range from 19 to 31 percent in the Appalachian Plateaus and Allegheny Ridges region, 34 to 47 percent in the Blue Ridge and Great Valley region, 33 to 48 percent in the Piedmont region, 45 to 64 percent in the Western Coastal Plain region, and 36 to 42 percent in the Eastern Coastal Plain region.

Maryland↗
USGS2025

Anatectic origin of Mississippian spodumene-bearing pegmatites in western Maine during orogenic plateau collapse

Spodumene pegmatites are an important lithium source, but the processes and tectonic settings in which they form are poorly understood. The Rumford pegmatite district surrounding Plumbago Mountain, western Maine, is host to numerous spodumene pegmatites, including the Plumbago North pegmatite (a world-class spodumene resource). Competing petrogenetic models for these spodumene pegmatites include (1) highly fractionated melts of the Mooselookmeguntic igneous complex and (2) anatexis. We tested these hypotheses by constraining the geologic, magmatic, metamorphic, and tectonic history of the Plumbago Mountain area with detailed geologic mapping and U-(Th)-Pb geochronology. The Silurian Rangeley Formation records initial isoclinal folding prior to, and contact-related metamorphism synchronous with, the intrusion of the 417 ± 4 Ma Plumbago Mountain pluton. Peak amphibolite facies metamorphism and crustal melting occurred during the ca. 410 to 400 Ma Acadian orogeny. Pulsed emplacement of the Mooselookmeguntic igneous complex occurred between ca. 389 and 356 Ma. Cassiterite U-Pb dates of spodumene pegmatites (333–327 Ma) are ≥23 m.y. younger than nearby granitic plutons, strongly arguing against the fractional crystallization model. Metamorphic monazite and xenotime (346–328 Ma) and 330 to 308 Ma 40 Ar/ 39 Ar hornblende dates indicate metamorphism coeval with spodumene pegmatite emplacement, supporting anatectic models. Reheating, anatexis, and spodumene pegmatite emplacement occurred during collapse of the 380 to 330 Ma Acadian orogenic plateau. Lithium enrichment may be linked to one or more stages of partial melting of metasedimentary and plutonic rocks during the formation, tenure, and collapse of the Acadian altiplano and emphasizes the role of anatexis in producing spodumene pegmatites of economic significance.

Maine↗
USGS2025

A new groundwater energy transport model for the MODFLOW hydrologic simulator

Heat transport in the subsurface is an important aspect of research related to the effects of a warming climate on ecological services (i.e., cold-water refugia); the development of geothermal resources for energy banking schemes (i.e., aquifer thermal energy storage [ATES]); and the effects of temperature on other aspects of groundwater quality, such as nutrient cycling. Historically, simulation of heat transport using the MODFLOW groundwater simulator and related codes was performed by scaling the input parameters of a solute-transport model to emulate heat transport. However, that approach required additional pre- and post-processing of input and output and could not account for the variation in effective thermal storage and transport properties during transient, unsaturated flow, for example. True heat-transport capabilities in the context of MODFLOW were first introduced in a variant called USG-Transport. More recently, a new groundwater energy-transport (GWE) model type has been added to MODFLOW 6, the core version of the MODFLOW hydrologic simulator. GWE supports the simulation of heat transport on structured or unstructured grids as well as within and between features of advanced packages that represent streams, lakes, multi-aquifer wells, and the unsaturated zone. GWE is integrated within MODFLOW 6 and is accessible through the FloPy Python package and the MODFLOW 6 application programming interface (API). An example simulation demonstrates conduction between grid cells through both the water and the solid aquifer material, including thermal bleeding from saturated overburden cells into a groundwater flow field.

Groundwater↗
USGS2026

Microtextural characteristics of adularia in banded quartz veins from the Midas low-sulfidation epithermal deposit, Nevada

High-grade ores at the Miocene Midas low-sulfidation epithermal deposit in northern Nevada are confined to crustiform quartz veins containing abundant adularia. Micro-X-ray fluorescence elemental mapping reveals that adularia is a common gangue mineral occurring in colloform bands, bands showing bladed textures, and bands with dendritic terminations. The adularia aggregates have delicate shapes and are comprised of stacked, submillimeter crystals hosted by fine-grained quartz. The textural evidence suggests that the adularia aggregates originally formed within a gel-like, noncrystalline silica matrix, which subsequently transformed into quartz. This indicates that the adularia did not precipitate in open space along the vein walls. Correlative microscopy, involving scanning electron microscopy-based automated mineralogy and optical petrography, demonstrates that bands containing abundant adularia are not the primary host to ore minerals. The ore minerals occur in different bands within the crustiform veins, implying that adularia and ore mineral precipitation did not always occur simultaneously. It is hypothesized here that fluid flow at Midas involved intermittent short-lived events of fluid flashing, causing rapid solute supersaturation in the liquid. During each flashing event, different amounts of vapor were produced along a given vein. Compositional differences between adjacent bands in the crustiform quartz veins may, therefore, be linked to variations in the amount of vapor formed during each flash event.

Nevada↗
USGS1998

Technique for simulating peak-flow hydrographs in Maryland

The efficient design and management of many bridges, culverts, embankments, and flood-protection structures may require the estimation of time-of-inundation and (or) storage of floodwater relating to such structures. These estimates can be made on the basis of information derived from the peak-flow hydrograph. Average peak-flow hydrographs corresponding to a peak discharge of specific recurrence interval can be simulated for drainage basins having drainage areas less than 500 square miles in Maryland, using a direct technique of known accuracy. The technique uses dimensionless hydrographs in conjunction with estimates of basin lagtime and instantaneous peak flow. Ordinary least-squares regression analysis was used to develop an equation for estimating basin lagtime in Maryland. Drainage area, main channel slope, forest cover, and impervious area were determined to be the significant explanatory variables necessary to estimate average basin lagtime at the 95-percent confidence interval. Qualitative variables included in the equation adequately correct for geographic bias across the State. The average standard error of prediction associated with the equation is approximated as plus or minus (+/-) 37.6 percent. Volume correction factors may be applied to the basin lagtime on the basis of a comparison between actual and estimated hydrograph volumes prior to hydrograph simulation. Three dimensionless hydrographs were developed and tested using data collected during 278 significant rainfall-runoff events at 81 stream-gaging stations distributed throughout Maryland and Delaware. The data represent a range of drainage area sizes and basin conditions. The technique was verified by applying it to the simulation of 20 peak-flow events and comparing actual and simulated hydrograph widths at 50 and 75 percent of the observed peak-flow levels. The events chosen are considered extreme in that the average recurrence interval of the selected peak flows is 130 years. The average standard errors of prediction were +/- 61 and +/- 56 percent at the 50 and 75 percent of peak-flow hydrograph widths, respectively.

Maryland↗
USGS2026

The effect of temperature, flow, density and disease on smallmouth bass (Micropterus dolomieu) early life growth rate

Individual growth rates of fish are influenced by gradually changing environmental conditions and rapid-onset events. However, there is a paucity of information on drivers of spatiotemporal variability in growth rates of fishes across large spatial extents. Using a 36-year dataset of smallmouth bass ( Micropterus dolomieu ) length-at-age data across 10 river reaches in Pennsylvania, USA ( n = 54,068 individuals), we estimated annual early life growth rates (mm year −1 ) and assessed the effects of relative abundance, summer temperature, summer streamflow rate and a disease outbreak on growth rate. We found that temperature had a positive effect on growth rate, varied spatially, and had a stronger effect in diseased reaches. There was also evidence for an impact of disease on early life growth through density-dependent mechanisms, with growth rates increasing from ∼85 to 101 mm·year −1 following disease-related decreases in abundance. This study adds to our understanding of the factors that shape early life growth, including rapid-onset events like disease which can have immediate and lasting effects on growth rate trajectory.

Pennsylvania↗
USGS2025

Preliminary field report of landslide hazards following Hurricane Helene

Executive Summary This report reflects our knowledge regarding the widespread landslide activity associated with Hurricane Helene observed during the U.S. Geological Survey’s (USGS) mission assignment to North Carolina in October 2024. The material in this report was originally prepared for the Federal Emergency Management Agency under mission assignment DR-4827-NC. The data and commentary in this report are reflective of a report provided to the Federal Emergency Management Agency (FEMA) on October 18, 2024, as well as information provided in briefings at the Buncombe County Emergency Operations Center. The report has been modified for public dissemination. This assessment was based on systematic visual examination and mapping of landslide locations from aerial and satellite imagery, visual and photographic observations from low-level helicopter overflights and conversations with local landslide experts from the North Carolina Geological Survey and Appalachian Landslide Consultants PLLC, and more than 50 years of combined landslide hazard professional experience of the mission-assigned field team. No systematic field investigations were done by the USGS. While responding to the event, the USGS did not identify any landslides that posed an immediate major threat to recovery personnel in parts of nine counties in North Carolina (Avery, Buncombe, Henderson, McDowell, Mitchell, Polk, Rutherford, Watauga, and Yancey); however, threats from renewed landslide activity may remain heightened in localized areas for months or even years. Known areas of the most abundant landslide occurrence include Bat Cave, Lake Lure, Chimney Rock, Swannanoa, Black Mountain, Fairview, steep areas in Asheville, and the Blue Ridge Parkway. The USGS shared detailed locations of known landslides with the Emergency Operations Centers. The thousands of landslide scars on hillsides and landslide deposits on flatter ground may present some threat to recovery activities. Soil and rocks will continue to erode from newly exposed landslide scars and may pose a threat to people and infrastructure who are immediately nearby. In general, the steeper and taller the landslide scar, the greater the potential threat. This threat is heightened during periods of rainfall and increases with the duration and intensity of rainstorms. Very heavy rainfall, or repeated rainfall events during short periods, could also initiate new landslides on steep slopes. Excavation of landslide deposits, particularly excavation of those deposits directly adjacent to steep slopes, may also pose a threat to nearby people and equipment. An interagency collaborative mapping effort led by the USGS that informed this assessment identified 1,155 landslide locations by the October 2024 briefings, but that number increased to 2,217 in a final reviewed version of the locations published in January 2025. Locations were mapped from satellite imagery, fixed-wing and helicopter surveys, media and social media, and field reports in the 3 weeks following the passage of the remnants of Hurricane Helene. USGS products outlined in this report are publicly available and include geotagged photographs from aerial reconnaissance, hazard models, an interactive view of mapped landslide locations, and landslide safety and education resources.

North Carolina, South Carolina, Tennessee, Virgini↗