SEARCH · USGS Science

Results for “Interpretation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57Linked to original sources

USGS2020

Geology of the Trout Rock caves (Hamilton Cave, Trout Cave, New Trout Cave) in Pendleton County, West Virginia (USA), and implications regarding the origin of maze caves

The Trout Rock caves (Hamilton Cave, Trout Cave, New Trout Cave) are located in a hill named Cave Knob that overlooks the South Branch of the Potomac River in Pendleton County, West Virginia (U.S.A). The geologic structure of this hill is a northeasttrending anticline, and the caves are located at different elevations primarily along the contact between the Devonian New Creek Limestone (Helderberg Group) and the overlying Devonian Corriganville Limestone (Helderberg Group). The entrance to New Trout Cave (Stop 1) is located on the east flank of Cave Knob anticline at an elevation of 585 m (1,920 ft) relative to sea level, or 39 m (128 ft) above the modern river. Much of the cave consists of passages that extend to the northeast along strike, and many of these passages have developed along primary joints that trend N40E or secondary joints that trend N40W. Sediments in New Trout Cave include mud and sand (some of which was mined for nitrate during the American Civil War), as well as large boulders in the front part of the cave. Gypsum crusts are present in a maze section of the cave ~213 to 305 m (700 to 1,000 ft) from the cave entrance. Excavations in New Trout Cave have produced vertebrate fossils of Rancholabrean age, ~300,000 to 10,000 years Before Present (BP). The entrance to Trout Cave (Stop 2) is located on the east flank of Cave Knob anticline ~100 m (328 ft) northwest of the New Trout Cave entrance at an elevation of 622 m (2,040 ft) relative to sea level, or 76 m (249 ft) above the modern river. Much of the cave consists of passages that extend to the northeast along strike, although a small area of network maze passages is present in the western portion of Trout Cave that is closest to Hamilton Cave. Many of the passages of Trout Cave have developed along primary joints that trend N40E or secondary joints that trend N40W. Sediments in Trout Cave include mud (also mined for nitrate during the American Civil War), as well as large boulders in the front part of the cave. Excavations in the upper levels of Trout Cave have produced vertebrate fossils of Rancholabrean age (~300,000 to 10,000 years BP), whereas excavations in the lower levels of the cave have produced vertebrate fossils of Irvingtonian age (~1,810,000 to 300,000 years BP). The entrance to Hamilton Cave (Stop 3) is located along the axis of Cave Knob anticline ~165 m (540 ft) northwest of the Trout Cave entrance at an elevation of 640 m (2,100 ft) relative to sea level, or 94 m (308 ft) above the modern river. The front (upper) part of Hamilton Cave has a classic network maze pattern that is an angular grid of relatively horizontal passages, most of which follow vertical or near-vertical primary joints that trend N40W and N50W and secondary joints that trend N60W and N80E. This part of the cave lies along the axis of Cave Knob anticline. In contrast, the passages in the back (lower) part of Hamilton Cave lie along the west flank of Cave Knob anticline at ~58 to 85 m (190 to 279 ft) above the modern river. These passages do not display a classic maze pattern, and instead they may be divided into the following two categories: (1) longer northeast-trending passages that are relatively horizontal and follow the strike of the beds; and (2) shorter northwest-trending passages that descend steeply to the west and follow the dip of the beds. Sediments in Hamilton Cave include mud (which was apparently not mined for nitrate during the American Civil War), as well as large boulders in the front part of the cave. Gypsum crusts are present along passage walls of the New Creek Limestone from the Slab Room to the Airblower. Excavations in the front part of Hamilton Cave (maze section) have produced vertebrate fossils of Irvingtonian age (~1,810,000 to 300,000 years BP). The network maze portions of Hamilton Cave are interpreted as having developed at or near the water table where water did not have a free surface in contact with air and where the following conditions were present: (1) Location on or near the axis of an anticline (the location of the greatest amount of flexure); (2) Abundant vertical or near vertical joints, which are favored by location in the area of greatest flexure and by a lithologic unit (chert-rich limestone) that is more likely to experience brittle rather than ductile deformation; (3) Widening of joints to enhance ease of water infiltration, favored by location in area of greatest amount of flexure; and (4) Dissolution along nearly all major joints to produce cave passages of approximately the same size (which would most likely occur via water without a free surface in contact with air). The cave passages that are located along anticline axes and along strike at the New Creek-Corriganville contact are interpreted as having formed initially during times of base level stillstand at or near the water table where water did not have a free surface in contact with air and where the water flowed along the hydraulic gradient at gentle slopes. Under such conditions, dissolution occurred in all directions to produce cave passages with relatively linear wall morphologies. In the lower portions of some of the along-strike passages, the cave walls have a more sinuous (meandering) morphology, which is interpreted as having formed during subsequent initial base level fall as cave development continued under vadose conditions where the water had a free surface in contact with air, and where water flow was governed primarily by gravitational processes. Steeply inclined cave passages that are located along dip at the New Creek-Corriganville contact are interpreted as having formed during subsequent true vadose conditions (after base level fall). This chronology of base level stasis (with cave development in the phreatic zone a short distance below top of water table) followed by base level fall (with cave development in the vadose or epiphreatic zone) has repeated multiple times at Cave Knob during the past ~4 to 3 million years, resulting in multiple cave passages at different elevations, with different passage morphologies, and at different passage locations with respect to strike and dip.

West Virginia↗

USGS2015

An ignimbrite caldera from the bottom up: Exhumed floor and fill of the resurgent Bonanza caldera, Southern Rocky Mountain volcanic field, Colorado

Among large ignimbrites, the Bonanza Tuff and its source caldera in the Southern Rocky Mountain volcanic field display diverse depositional and structural features that provide special insights concerning eruptive processes and caldera development. In contrast to the nested loci for successive ignimbrite eruptions at many large multicyclic calderas elsewhere, Bonanza caldera is an areally isolated structure that formed in response to a single ignimbrite eruption. The adjacent Marshall caldera, the nonresurgent lava-filled source for the 33.9-Ma Thorn Ranch Tuff, is the immediate precursor for Bonanza, but projected structural boundaries of two calderas are largely or entirely separate even though the western topographic rim of Bonanza impinges on the older caldera. Bonanza, source of a compositionally complex regional ignimbrite sheet erupted at 33.12 ± 0.03 Ma, is a much larger caldera system than previously recognized. It is a subequant structure ∼20 km in diameter that subsided at least 3.5 km during explosive eruption of ∼1000 km 3 of magma, then resurgently domed its floor a similar distance vertically. Among its features: (1) varied exposure levels of an intact caldera due to rugged present-day topography—from Paleozoic and Precambrian basement rocks that are intruded by resurgent plutons, upward through precaldera volcanic floor, to a single thickly ponded intracaldera ignimbrite (Bonanza Tuff), interleaved landslide breccia, and overlying postcollapse lavas; (2) large compositional gradients in the Bonanza ignimbrite (silicic andesite to rhyolite ignimbrite; 60%–76% SiO 2 ); (3) multiple alternations of mafic and silicic zones within a single ignimbrite, rather than simple upward gradation to more mafic compositions; (4) compositional contrasts between outflow sectors of the ignimbrite (mainly crystal-poor rhyolite to east, crystal-rich dacite to west); (5) similarly large compositional diversity among postcollapse caldera-fill lavas and resurgent intrusions; (6) brief time span for the entire caldera cycle (33.12 to ca. 33.03 Ma); (7) an exceptionally steep-sided resurgent dome, with dips of 40°–50° on west and 70°–80° on northeast flanks. Some near-original caldera morphology has been erosionally exhumed and remains defined by present-day landforms (western topographic rim, resurgent core, and ring-fault valley), while tilting and deep erosion provide three-dimensional exposures of intracaldera fill, floor, and resurgent structures. The absence of Plinian-fall deposits beneath proximal ignimbrites at Bonanza and other calderas in the region is interpreted as evidence for early initiation of pyroclastic flows, rather than lack of a high eruption column. Although the absence of a Plinian deposit beneath some ignimbrites elsewhere has been interpreted to indicate that abrupt rapid foundering of the magma-body roof initiated the eruption, initial caldera collapse began at Bonanza only after several hundred kilometers of rhyolitic tuff had erupted, as indicated by the minor volume of this composition in the basal intracaldera ignimbrite. Caldera-filling ignimbrite has been largely stripped from the southern and eastern flank of the Bonanza dome, exposing large areas of caldera-floor as a structurally coherent domed plate, bounded by ring faults with locations that are geometrically closely constrained even though largely concealed beneath valley alluvium. The structurally coherent floor at Bonanza contrasts with fault-disrupted floors at some well-exposed multicyclic calderas where successive ignimbrite eruptions caused recurrent subsidence. Floor rocks at Bonanza are intensely brecciated within ∼100 m inboard of ring faults, probably due to compression and crushing of the subsiding floor in proximity to steep inward-dipping faults. Upper levels of the floor are locally penetrated by dike-like crack fills of intracaldera ignimbrite, interpreted as dilatant fracture fills rather than ignimbrite vents. The resurgence geometry at Bonanza has implications for intracaldera-ignimbrite volume; this parameter may have been overestimated at some young calderas elsewhere, with bearing on outflow-intracaldera ratios and times of initial caldera collapse. Such features at Bonanza provide insights for interpreting calderas universally, with respect to processes of caldera collapse and resurgence, inception of subsidence in relation to progression of the ignimbrite eruption, complications with characterizing structural versus topographic margins of calderas, contrasts between intra- versus extracaldera ignimbrite, and limitations in assessing volumes of large caldera-forming eruptions. Bonanza provides a rare site where intact caldera margins and floor are exhumed and exposed, providing valuable perspectives for understanding younger similar calderas in some of the world’s most active and dangerous silicic provinces.

Colorado↗

USGS2022

Pyroclastic deposits of Ubehebe Crater, Death Valley, California, USA: Ballistics, pyroclastic surges, and dry granular flows

We describe and interpret deposits associated with the final Ubehebe Crater-forming, phreatomagmatic explosive phase of the multivent, monogenetic Ubehebe volcanic center. Ubehebe volcano is located in Death Valley, California, USA. Pyroclastic deposits occur in four main facies: (1) lapilli- and blockdominated beds, (2) thinly bedded lapilli tuff, (3) laminated and cross-laminated ash, and (4) massive lapilli ash/tuff. Lapilli- and block-dominated beds are found mostly within several hundred meters of the crater and transition outward into discontinuous lenses of lapilli and blocks; they are interpreted to have been deposited by ballistic processes associated with crater-forming explosions. Thinly bedded lapilli tuff is found mainly within several hundred meters, and laminated and cross-laminated ash extends at least 9 km from the crater center. Dune forms are common within ~2 km of the crater center, while finer-grained, distal deposits tend to exhibit planar lamination. These two facies (thinly bedded lapilli tuff and laminated and cross-laminated ash) are interpreted to record multiple pyroclastic surges (dilute pyroclastic currents). Repeated couplets of coarse layers overlain by finer-grained, laminated horizons suggest that many or most of the surges were transient, likely recording individual explosions, and they traveled over complex topography in some areas. These two factors complicate the application of classical sediment-transport theory to quantify surge properties. However, dune-form data provide possible constraints on the relationships between suspended load sedimentation and bed-load transport that are consistent using two independent approaches. Massive lapilli ash/tuff beds occur in drainages below steep slopes and can extend up to ~1 km onto adjacent valley floors beneath large catchments. Although they are massive in texture, their grain-size characteristics are shared with laminated and cross-laminated ash facies, with which they are locally interbedded. These are interpreted to record concentrated granular flows sourced by remobilized pyroclastic surge deposits, either during surge transport or shortly after, while the surge deposits retained their elevated initial pore-gas pressures. Although similar surge-derived concentrated flows have been described elsewhere (e.g., Mount St. Helens, Washington, USA, and Soufriére Hills, Montserrat, West Indies), to our knowledge Ubehebe is the first case where such processes have been identified at a maar volcano. These concentrated flows followed paths that were independent of the pyroclastic surges and represent a potential hazard at similar maar volcanoes in areas with complex terrain.

California↗

USGS1989

Seismic methods for determining earthquake source parameters and lithospheric structure

The seismologic methods most commonly used in studies of earthquakes and the structure of the continental lithosphere are reviewed in three main sections: earthquake source parameter determinations, the determination of earth structure using natural sources, and controlled-source seismology. The emphasis in each section is on a description of data, the principles behind the analysis techniques, and the assumptions and uncertainties in interpretation. Rather than focusing on future directions in seismology, the goal here is to summarize past and current practice as a companion to the review papers in this volume. Reliable earthquake hypocenters and focal mechanisms require seismograph locations with a broad distribution in azimuth and distance from the earthquakes; a recording within one focal depth of the epicenter provides excellent hypocentral depth control. For earthquakes of magnitude greater than 4.5, waveform modeling methods may be used to determine source parameters. The seismic moment tensor provides the most complete and accurate measure of earthquake source parameters, and offers a dynamic picture of the faulting process. Methods for determining the Earth’s structure from natural sources exist for local, regional, and teleseismic sources. One-dimensional models of structure are obtained from body and surface waves using both forward and inverse modeling. Forward-modeling methods include consideration of seismic amplitudes and waveforms, but lack the formal resolution estimates obtained with inverse methods. Two- and three-dimensional lithospheric models are derived using various inverse methods, but at present most of these methods consider only traveltimes of body waves. Controlled-source studies of the Earth’s structure are generally divided by method into seismic refraction/wide-angle reflection and seismic reflection studies. Seismic refraction profiles are usually interpreted in terms of two-dimensional structure by forward modeling of traveltimes and amplitudes. The refraction method gives excellent estimates of seismic velocities, but relatively low resolution of structure. Formal resolution estimates are not possible for models derived from forward modeling, but informal estimates can be obtained by perturbing the best-fitting model. Inversion methods for seismic refraction data for one-dimensional models are well established, and two- and three-dimensional methods, including tomography, have recently been developed. Seismic reflection data provide the highest resolution of crustal structure, and have provided many important geological insights in the past decade. The acquisition and processing of these data have been greatly advanced by the hydrocarbon exploration industry. However, reliable crustal velocity control is generally lacking, and the origin of deep crustal reflections remains unclear, resulting in nonunique interpretations. A new form of lithospheric seismology has recently emerged that combines the advantages of seismic refraction and seismic reflection profiles, and the distinction between the two methods is steadily diminishing. Major challenges for future work will be the collection of data that are more densely sampled in space, and the development of interpretation methods that provide quantitative estimates of the uncertainties in the calculated models.

GSA Memoirs↗

USGS1990

Stratigraphy and tectonics of Paleozoic arc-related rocks of the northernmost Sierra Nevada, California; The eastern Klamath and northern Sierra terranes

The Eastern Klamath and Northern Sierra terranes of northern California consist of Devonian to Jurassic arc-related rocks that structurally and/or stratigraphically overlie Devonian(?) or older complexes that consist of quartzite, quartzofeldspathic sandstone, chert, and mafic and ultramafic rocks. These terranes lie within a regional belt of Paleozoic arc-related rocks that can be recognized from the Sierra Nevada to British Columbia. The Eastern Klamath and Northern Sierra terranes are geographically separate and have paleontologic linkage, but lack direct stratigraphic ties in strata of Late Devonian to Early Permian age. This chapter describes new stratigraphic correlations and structural interpretations of rocks that lie in the northernmost part of the Sierra Nevada. These rocks include the Butt Valley block of the Northern Sierra terrane, and rocks herein interpreted as dismembered Eastern Klamath terrane. The rocks of Eastern Klamath terrane affinity, Soda Ravine block, occur as a tectonic sliver that lies to the west of the Butt Valley block. The Soda Ravine block is about 2 to 4 km by 20 km and includes limestone lenses equivalent to zone A of the McCloud Limestone of the Eastern Klamath terrane, and upper Middle and Upper Triassic limestone, slate, siltstone, and pebble conglomerate. Similar Permian limestone with McCloud faunal affinities and slate-bearing slivers have been noted by previous workers in this area and to the south. The Butt Valley block had previously been interpreted as part of the west limb of a regional anticline, the Almanor anticline. New mapping suggests that the block is not contiguous with rocks that lie to the east. The Butt Valley block includes the Devonian and Mississippian Taylor Formation, which is unconformably overlain by an Upper Triassic (Carnian and Norian) basal conglomerate and sandstone, which in turn is overlain by Upper Triassic limestone. The Upper Triassic limestone is overlain by a sparsely fossiliferous, lithic-volcaniclastic sequence containing poorly preserved Triassic or Early Jurassic, and probable Early Jurassic, ammonites and clams. This sequence is similar to conglomerate, Triassic limestone, and volcaniclastic rocks of the Jurassic Sailor Canyon Formation, which overlie a regional Late Triassic unconformity west of Lake Tahoe, thus expanding the known distribution of the unconformity in the Sierra Nevada. The Triassic unconformity overlies Carboniferous and older rocks around the North Fork American River area to the south, and overlies Devonian and older rocks on the Butt Valley block, but overlies Permian rocks east and southeast of the Butt Valley block. These relations suggest that either the Butt Valley block was part of a highland or uplifted block along the western part of the northern Sierra terrane or that the Butt Valley block previously lay closer to the North Fork American River area and has been translated northward by right-slip displacement. Northern Sierra terrane east of the Butt Valley block consists of the Hough and Genesse blocks, which are separated by the Grizzly Mountain fault zone. The Grizzly Mountain fault zone is here interpreted to be a transpressional right-slip fault.

California↗

USGS2025

New constraints on location and timing of the Great Lakes tectonic zone, central Upper Peninsula, Michigan, USA

The Great Lakes tectonic zone (GLTZ) forms the boundary between the Wawa–Abitibi and Minnesota River Valley subprovinces within the Archean Superior Province. The GLTZ is concealed for all of its 1100 km length, except for a segment in the central Upper Peninsula of Michigan. There, it is exposed as a northwest-striking mylonite zone along a 11 km segment, extending to the onlap of Paleozoic rocks to the east. Farther east, its location has been unknown. Here, we use aeromagnetic and gravity data to develop interpretations of the expression of the GLTZ and to define its extent under cover. Aeromagnetic gradients over the mylonite zone are interpreted to be produced by structurally juxtaposed rocks with varying magnetizations. Gravity data show a regional gradient along the GLTZ, produced by the juxtaposition of a dense greenstone belt on the north against lower-density gneisses and granites on the south. The GLTZ is interpreted to extend ∼55 km under cover to the east. The GLTZ is terminated on the east by the buried eastern arm of the ca. 1100 Ma Midcontinent Rift. An undeformed granitic dike that cuts the mylonitic foliation produces a U–Pb apatite age of 2523 ± 33 Ma, implying no major post-Archean shearing occurred, and is at odds with previous interpretations of major Proterozoic reactivation. A granite intrusion in the Minnesota River Valley subprovince produces a Pb–Pb zircon age of 2606.9 ± 3.6/7.4 Ma. This suggests that magmatism related to the Sacred Heart orogeny, previously known in Minnesota, extended to Michigan.

Michigan↗

USGS1990

Schlumberger soundings near Medicine Lake, California

The use of direct current resistivity soundings to explore the geothermal potential of the Medicine Lake area in northern California proved to be challenging because of high contact resistances and winding roads. Deep Schlumberger soundings were made by expanding current electrode spacings along the winding roads. Measured apparent resistivities were corrected using the geometric factor for the exact array geometry instead of a linear array geometry. For horizontally stratified, laterally homogeneous media, the apparent resistivities measured with a nonlinear Schlumberger array are equal to those measured with a linear Schlumberger array provided that (a) distances from the current electrodes to the center of the array are equal, and (b) the proper geometric factor is used to calculate the apparent resistivity. Corrected sounding data were interpreted using an automatic interpretation method. Forty-two maps of interpreted resistivity were calculated for depths extending from 20 to 1000 m. Computer animation of these 42 maps revealed that (a) certain subtle anomalies migrate laterally with depth and can be traced to their origin, (b) an extensive volume of low-resistivity material underlies the survey area, and (c) the three areas (east of Bullseye Lake, southwest of Glass Mountain, and northwest of Medicine Lake) may be favorable geothermal targets. Six interpreted resistivity maps and three cross-sections illustrate the above findings.

Geophysics↗

USGS1999

The search for a source rock for the giant Tar Sand triangle accumulation, southeastern Utah

A large proportion (about 36%) of the worlds oil resource is contained in accumulations of heavy oil or tar. In these large deposits of degraded oil, the oil in place represents only a fraction of what was present at the time of accumulation. In many of these deposits, the source of the oil is unknown, and the oil is thought to have migrated over long distances to the reservoirs. The Tar Sand triangle in southeastern Utah contains the largest tar sand accumulation in the United States, with 6.3 billion bbl of heavy oil estimated to be in place. The deposit is thought to have originally contained 13-16 billion bbl prior to the biodegradation, water washing, and erosion that have taken place since the middle-late Tertiary. The source of the oil is unknown. The tar is primarily contained within the Lower Permian White Rim Sandstone, but extends into permeable parts of overlying and underlying beds. Oil is interpreted to have migrated into the White Rim sometime during the Tertiary when the formation was at a depth of approximately 3500 m. This conclusion is based on integration of fluid inclusion analysis, time-temperature reconstruction, and apatite fission-track modeling for the White Rim Sandstone. Homogenization temperatures cluster around 85-90°C for primary fluid inclusions in authigenic, nonferroan dolomite in the White Rim. The fluid inclusions are associated with fluorescent oil-bearing inclusions, indicating that dolomite precipitation was coeval with oil migration. Burial reconstruction suggests that the White Rim Sand stone reached its maximum burial depth from 60 to 24 Ma, and that maximum burial was followed by unroofing from 24 to 0 Ma. Time-temperature modeling indicates that the formation experienced temperatures of 85-90°C from about 35 to 40 Ma during maximum burial. Maximum formation temperatures of about 105-110°C were reached at about 24 Ma, just prior to unroofing. Thermal modeling is used to examine the history of potential source rocks for the White Rim oil. The most attractive potential sources for White Rim oil include beds within one or more of the following formations: the Proterozoic Chuar Group, which is present in the subsurface southwest of the Tar Sand triangle; the Mississippian Delle Phosphatic Member of the Deseret Limestone and equivalent formations, the Permian Kaibab Limestone, the Sinbad Limestone Member of the Triassic Moenkopi Formation, and the Jurassic Arapien Shale, Twin Creek Limestone, and Carmel Formation, which are present west of the Tar Sand triangle; the Pennsylvanian Paradox Formation in the Paradox basin east of the Tar Sand triangle; and the Permian Park City Formation northwest of the Tar Sand triangle. Each formation has a high total organic carbon content and is distributed over a wide enough geographic area to have provided a huge volume of oil. Source beds in all of the formations reached thermal maturity at times prior to or during the time that migration into the White Rim is interpreted to have occurred. Based on all available data, the most likely source for the Tar Sand triangle appears to be the Mississippian Delle Phosphatic Member of the Deseret Limestone. Secondary migration out of the Delle is interpreted to have occurred during the Cretaceous, during Sevier thrusting. Subsequent tertiary migration into the Tar Sand triangle reservoir is interpreted to have occurred later, during middle Tertiary Laramide deformation.

Utah↗

USGS2012

Selection indicates preference in diverse habitats: A ground-nesting bird ( Charadrius melodus ) using reservoir shoreline

Animals use proximate cues to select resources that maximize individual fitness. When animals have a diverse array of available habitats, those selected could give insights into true habitat preferences. Since the construction of the Garrison Dam on the Missouri River in North Dakota, Lake Sakakawea (SAK) has become an important breeding area for federally threatened piping plovers ( Charadrius melodus ; hereafter plovers). We used conditional logistic regression to examine nest-site selection at fine scales (1, 3, and 10 m) during summers 2006–2009 by comparing characteristics at 351 nests to those of 668 random sites within nesting territories. Plovers selected sites (1 m 2 ) that were lower than unused random sites, increasing the risk of nest inundation. Plovers selected nest sites that were flat, had little silt, and at least 1 cobble; they also selected for 3-m radius nest areas that were relatively flat and devoid of vegetation and litter. Ninety percent of nests had <38% coverage of silt and <10% slope at the site, and <15% coverage of vegetation or litter and <31% slope within the 3-m radius. Gravel was selected for at nest sites (11% median), but against in the area 10-m from the nest, suggesting plovers select for patches or strips of gravel. Although elevation is rarely evaluated in studies of ground-nesting birds, our results underscore its importance in habitat-selection studies. Relative to where plovers historically nested, habitat at SAK has more diverse topography, substrate composition, vegetation communities, and greater water-level fluctuations. Accordingly, our results provide an example of how habitat-selection results can be interpreted as habitat preferences because they are not influenced by desired habitats being scarce or absent. Further, our results will be useful for directing habitat conservation for plovers and interpreting other habitat-selection studies.

North Dakota↗

USGS1998

Dynamic stress changes during earthquake rupture

We assess two competing dynamic interpretations that have been proposed for the short slip durations characteristic of kinematic earthquake models derived by inversion of earthquake waveform and geodetic data. The first interpretation would require a fault constitutive relationship in which rapid dynamic restrengthening of the fault surface occurs after passage of the rupture front, a hypothesized mechanical behavior that has been referred to as “self-healing.” The second interpretation would require sufficient spatial heterogeneity of stress drop to permit rapid equilibration of elastic stresses with the residual dynamic friction level, a condition we refer to as “geometrical constraint.” These interpretations imply contrasting predictions for the time dependence of the fault-plane shear stresses. We compare these predictions with dynamic shear stress changes for the 1992 Landers ( M 7.3), 1994 Northridge ( M 6.7), and 1995 Kobe ( M 6.9) earthquakes. Stress changes are computed from kinematic slip models of these earthquakes, using a finite-difference method. For each event, static stress drop is highly variable spatially, with high stress-drop patches embedded in a background of low, and largely negative, stress drop. The time histories of stress change show predominantly monotonic stress change after passage of the rupture front, settling to a residual level, without significant evidence for dynamic restrengthening. The stress change at the rupture front is usually gradual rather than abrupt, probably reflecting the limited resolution inherent in the underlying kinematic inversions. On the basis of this analysis, as well as recent similar results obtained independently for the Kobe and Morgan Hill earthquakes, we conclude that, at the present time, the self-healing hypothesis is unnecessary to explain earthquake kinematics.

California↗

USGS2017

Unraveling the channel–lobe transition zone with high-resolution AUV bathymetry: Navy Fan, offshore Baja California, Mexico

Ultra-high-resolution (1 m * 1 m * 0.25 m) bathymetry was acquired with an autonomous underwater vehicle (AUV) over a sector of the Navy Fan offshore Baja California. The survey specifically targeted an area where the former interpretation of the fan showed a channel–lobe transition; however, the lobe and the transition were not recognized. Instead, the newly acquired bathymetry shows that the previously identified channel continues basinward changing its overall morphology and stratigraphic architecture, becoming gradually but significantly wider (650–1000 m) and of lower relief (3–4 m). Cores from the channel thalweg recovered mud-poor (< 5%) well-sorted sands, interpreted as deposited by fully turbulent flows. The cores also show several mud-rich (9–18%) poorly sorted sands, probably indicating deposition from more cohesive flows. The high-resolution bathymetry shows large sectors of the seafloor sculpted by elaborate bedforms and scours. The overbank area north of the channel exhibits the most numerous and prominent scours, interpreted to have been largely generated by flow stripping at a bend in the channel. Along high-gradient sectors (more than approximately 1¯) of this area, the scours are largest and deepest. Some of these scours show an erosional headwall and a distal upflow-dipping depositional bulge, forming repetitive bedforms interpreted as erosional cyclic steps associated with locked-in-place trains of hydraulic jumps. The scours seem to coalesce to form an incipient channel, which would likely drive the avulsion of the main channel. Further basinward, average gradients decrease (< 0.6¯ ) and scours become smaller and less deep suggesting a gradient control on erosion. The southern channel margin and adjacent overbank area exhibit a trend of scours that are elongated transverse to flow, that successively repeat themselves basinwards, and that at times merge with sediment waves. Probably these scours are genetically linked to sediment waves, and they may have been formed by cyclic-step-like processes as well. The acquired bathymetry represents a breakthrough in the imaging of the proximal sectors of deep-sea fans, which provides the basis for an accurate morphometric characterization and the understanding of sedimentary processes and morphodynamics associated with the delivery of sediment into the deep sea.

Baja California↗

USGS2014

Distal facies variability within the Upper Triassic part of the Otuk Formation in northern Alaska

The Triassic-Jurassic Otuk Formation is a potentially important source rock in allochthonous structural positions in the northern foothills of the Brooks Range in the North Slope of Alaska. This study focuses on three localities of the Upper Triassic (Norian) limestone member, which form a present-day, 110-km-long, east-west transect in the central Brooks Range. All three sections are within the structurally lowest Endicott Mountain allochthon and are interpreted to have been deposited along a marine outer shelf with a ramp geometry. The uppermost limestone member of the Otuk was chosen for this study in order to better understand lateral and vertical variability within carbonate source rocks, to aid prediction of organic richness, and ultimately, to evaluate the potential for these units to act as continuous (or unconventional) reservoirs. At each locality, 1 to 4 m sections of the limestone member were measured and sampled in detail to capture fine-scale features. Hand sample and thin section descriptions reveal four major microfacies in the study area, and one diagenetically recrystallized microfacies. Microfacies 1 and 2 are interpreted to represent redeposition of material by downslope transport, whereas microfacies 3 and 4 have high total organic carbon (TOC) values and are classified as primary depositional organofacies. Microfacies 3 is interpreted to have been deposited under primarily high productivity conditions, with high concentrations of radiolarian tests. Microfacies 4 was deposited under the lowest relative-oxygen conditions, but abundant thin bivalve shells indicate that the sediment-water interface was probably not anoxic. The Otuk Formation is interpreted to have been deposited outboard of a southwest-facing ramp margin, with the location of the three limestone outcrops likely in relatively close proximity during deposition. All three sections have evidence of transported material, implying that the Triassic Alaskan Basin was not a low-energy, deep-water setting, but rather a dynamic system with intermittent, yet significant, downslope flow. Upwelling played an important role in the small-scale vertical variability in microfacies. The zone of upwelling and resultant oxygen-minimum zone may have migrated across the ramp during fourth- or fifth-order sea-level changes.

Alaska↗

USGS2010

Further considerations of the Ce/Yb vs. Ba/Ce plot in volcanology and tectonics

A plot of Ce/Yb vs. Ba/Ce, for locality averages, effectively separates mid-ocean ridge basalts (MORB) (Ce/Yb <10, Ba/Ce 1-4.2), oceanic island volcanics (OIV) (Ce/Yb >10, Ba/Ce <6), which are generally hotspot related, and island arc volcanics (IAV) (Ce/Yb <23, Ba/Ce >4.2). The conventional interpretation is that these three types of volcanic environments involve oceanic rift-related, large-volume partial melts (˜20-30%) of a depleted source (MORB), small volume melts (˜5% for alkalic volcanics) of enriched sources related to plumes (OIV), and melts of hydrous-enriched sources during subduction, especially for Ba (IAV). Three OIV sites, however, have average ratios that fall in the MORB field (e.g., Krafla Volcano, Iceland), and these localities also tend to have other geochemical data similar to MORB. Average ratios of Hawaiian tholeiitic shield basalts of Mauna Kea and Koolau volcanoes occupy a restricted field on a plot of Ce/Yb vs. Ba/Ce of 10-18 for Ce/Yb and 2.8-3.1 for Ba/Ce, a field toward which other shield basalts and cone-building volcanics regress. In general, post-shield alkalic rocks have higher values of Ce/Yb than do tholeiites. Peralkalic basalts (basanites, melilitites, and phonolites) have even higher values of Ce/Yb, reflecting smaller degrees of partial melting (perhaps 1-2%) and melting of sources containing phlogopite that were enriched by CO 2 -dominated fluids. The minor post-erosion nephelinitic suites of Hawaii (e.g., the Honolulu Series on Oahu, and the Koloa suite on Kauai) generally have values both greater than IAV for Ce/Yb and greater than other kinds of OIV for Ba/Ce in a part of the plot previously not found to be occupied by data. Alkali basalts of both these nephelinitic series have the lowest and similar ratios (Ce/Yb ˜ 25; Ba/Ce ˜ 10). In the Hawaiian Islands, there are two trends. One (a), where phlogopite has been interpreted to remain in the source, generally has Ba/Ce decrease away from the alkali basalts as Ce/Yb increases. The other (b), where phlogopite has been interpreted to enter the melt, occupies a field that is high in both Ce/Yb (>30) relative to IAV and in Ba/Ce (>8) relative to the OIV field. There are some exceptions, also, for IAV that plot outside the IAV field. The values of Ce/Yb in Mariana Islands samples, for example, are exceptionally low for the IAV (Ce/Yb <5 with many samples <2). Examples of two cross-chain Kasuga Islands, however, have average values of Ce/Yb considerably greater than for any other Mariana Islands data, and individual samples extend from within the IAV field into the OIV field, which may indicate a mixture of IAV and OIV sources (rather than involvement of a hotspot, these island volcanics have been interpreted as magma of OIV entrapped "plums" in an IAV "pudding" by Stern et al., 1993). Not surprisingly, continental arc volcanics (CAV) are generally similar to IAV, but with somewhat greater dispersion in Ce/Yb, perhaps representing a larger contribution of continental materials to the volcanics. Continental rift volcanics (CRV) are complex. The Antarctic rift data fall in the OIV field, and clearly define a hotspot origin for the rift with little contamination in the continental lithosphere, but most CRV data fall in the IAV field (Rio Grande rift tholeiites, Yellowstone Plateau basalts, Columbia River basalts, East African rift basalts). The Yellowstone basalt samples judged to be least crustally contaminated from other considerations (e.g., through Pb and Sr isotopes) approach closest to the OIV or hotspot field in the Ce/Yb vs. Ba/Ce plot, compatible with a hotspot origin with variable continental lithosphere interactions. The data from the Rio Grande rift have no such trend in Ce/Yb vs. Ba/Ce. Other trace element and isotopic data are suggestive of a different kind of origin, perhaps melting in the continental lithosphere from pressure release or other causes as suggested in the literature. Carbonatites, kimberlites, and ultrapotassic rocks form extreme end members for the peralkalic rocks on the continents with Ce/Yb values in the hundreds and even exceeding 1,000 in natrocarbonatite. Carbonatites and kimberlite type I, however, have Ba/Ce <8 with few exceptions. Ultrapo tassic rocks and kimberlite type II also have Ce/Yb values in the hundreds but with Ba/Ce >9. These rocks, although rare in the ocean basins (e.g., carbonatite on São Vicente Island in the Cape Verdes archipelago, Indian Ocean) plot similarly to their continental cousins. For Hawaii, the nephelinitic suites of both the Honolulu and Koloa series trend from alkali and alkali olivine basalt ratios toward higher signatures for Ce/Yb for other rock types. The Honolulu series, however, progresses towards smaller values of Ba/Ce for nephelinite-melilitite (Ce/Yb ˜ 85; Ba/Ce ˜ 5-7) near the low end of Ce/Yb found in carbonatite/kimberlite type I, whereas the Koloa series progresses toward higher Ba/Ce (Ce/Yb ˜ 65; Ba/Ce ˜ 14-15) for nephelinite-melilitite with Ce/Yb values near the lower end of kimberlite type II/ultrapotassic rocks. Carbonated phlogopitic sources have been proposed for peralkalic rocks of both oceans and continents. Carbonatites and/or kimberlites are suggested to possibly be present at depth under the Hawaiian nephelinitic series and in other OIV environments containing peralkalic suites.

International Geology Review↗

USGS1987

Bouguer gravity anomaly and isostatic residual gravity maps of the Walker Lake 1 degree by 2 degrees Quadrangle, California and Nevada

The accompanying gravity anomaly maps are part of a folio of maps of the Walker Lake 1° by 2° quadrangle, California and Nevada, prepared under the Conterminous United States Mineral Assessment Program. The quadrangle encompasses an area of about 19,500 km 2 along and to the east of the east flank of the Sierra Nevada (fig. 1). The Bouguer gravity anomaly map of the Walker Lake quadrangle was prepared by interpolating gravity values among 3,447 gravity stations established in the quadrangle and additional stations from adjacent quadrangles. An isostatic residual gravity map was prepared in order to reduce the effect; of interfering gravity gradients associated with the isostatic root of the Sierra Nevada. Methods of data reduction and factors that limit the accuracy of the gravity values are discussed in the following sections of this report. The geologic interpretation of the gravity maps is based on previous studies, sample measurements, and correlation with other maps of the folio including a geologic map (Stewart and others, 1982) and a map showing Mesozoic plutonic rocks (John, 1983). The purpose of the interpretative part of this report is to demonstrate the correlation between gravity anomalies and the mapped geology, to assess the continuation of exposed geologic units beneath the surface, and to suggest the location of concealed subsurface bodies with mineral resource potential. A three-dimensional model of the Little Walker caldera (fig. 6) is used to illustrate a possible quantitative interpretation of a gravity anomaly. A concealed 25 by 75-km Cenozoic batholith along the east flank of the Sierra Nevada with possible lateral extensions is suggested in this report. A possible magmatic mechanism is discussed to augment contemporary explanations for the extensional origin of valleys. The possibility of lower gravity anomalies indicating thinner roof rocks in the basement beneath mountain ranges also is discussed. Furthermore, interpretation of gravity anomalies was applied in discussions with W.D. Menzie (oral commun. , 1982) as one of the criteria used to identify and to delineate areas of mineral resource potential.

California, Nevada↗

USGS1984

Measured sections and discussion of the main turbidite member, Middle Pennsylvanian Minturn Formation, northern Sangre de Cristo Range, Custer and Saguache counties, Colorado

Turbidites are sediments deposited by turbid density currents. The turbidites described here are interpreted as prodelta deposits that formed in front of fan deltas and alluvial fans during the uplift of the ancestral Rocky Mountains in Pennsylvanian time. Laterally extensive, lenticular sand bodies deposited by turbidity flows crop out in the Middle Pennsylvanian Minturn Formation in the northern Sangre de Crísto Range, Custer and Saguache Counties, Colo. (figs. 1, 2). One of the turbidite-bearing intervals, informally designated the "main turbidite member," lies 90.6 m above the base of the Minturn; it reaches 150 m in thickness and extends more than 13 km along strike. The internal stratigraphy and sedimentary structures of the main turbidite member are described from the measured sections presented here. The Middle Pennsylvanian Minturn Formation of the Spread Eagle Peak thrust plate (Lindsey, Johnson, and Andriessen, 1983) consists of about 2,000 m of interbedded conglomeratic sandstone, sandstone, siltstone, and lesser amounts of conglomerate, shale, and limestone. The lower 1,500 m of the Minturn is composed mainly of prograding deltaic-alluvial cycles that contain interva1s of prodelta turbidites. The upper 500 m of the Minturn consists of deposits of small deltas and bralded streams interbedded with shallow marine limestones Interpreted as a san-delta deposit (Clark, 1982). Above the Minturn Formation, the Pennsylvanian and Permian Sangre de Cristo Formation consists of more than 1,700 m of coarse conglomerate and sandstone interpreted as an a 11uvialfan deposit (Lindsey and Schaefer, 1984). The main turbidite member is the thickest and most extensive of the intervals of prodelta turbidites in the Minturn Formation. Each turbidite interval is part of a coarsening upward sequence interpreted as a prograding fan delta. A typical prograding cycle consists of prodelta marine shale and siltstone, prodelta turbidite sandstones, delta-front sandstone and conglomerate, and deltaic and alluvial-plain sandstone, siltstone, and shale. Fossils of 1and plants (mostly Calamites, including some in growth position) are locally abundant in deltaic and alluvial sediments of the prograding cycles. The turbidites are regarded as having been deposited offshore from alluvial systems.

Colorado↗

USGS2003

Preliminary publications book 2 from project on mineral resources, metallogenesis, and tectonics of northeast Asia

This is the Web version of a CD-ROM publication. This report consists of summary major compilations and syntheses accomplished in the six-year project through April 2003 for the study on the Mineral Resources, Metallogenesis, and Tectonics of Northeast Asia (Eastern and Southern Siberia, Mongolia, Northeastern China, South Korea, and Japan). The major scientific goals and benefits of the project are to: (1) provide a comprehensive international data base on the mineral resources of the region that is the first, extensive knowledge available in English; (2) provide major new interpretations of the origin and crustal evolution of mineralizing systems and their host rocks, thereby enabling enhanced, broad-scale tectonic reconstructions and interpretations; and (3) promote trade and scientific and technical exchanges between the North America and Northeast Asia. Data from the project are providing sound scientific data and interpretations for commercial firms, governmental agencies, universities, and individuals that are developing new ventures and studies in the project area, and for land-use planning studies that deal with both mineral potential issues. Northeast Asia has vast potential for known and undiscovered mineral deposits; however, little information existed in English in the West until publication of products from this project. Consequently, data and interpretations from the project are providing basic knowledge for major scientific, commercial, national, and international endeavors by other interested individuals and groups.

Siberia↗

USGS2007

Introduction to Regional Geology, Tectonics, and Metallogenesis of Northeast Asia

Purpose This introduction presents an overview of the regional geology, tectonics, and metallogenesis of Northeast Asia. The major purposes are to provide a relatively short summary of these features for readers who are unfamiliar with Northeast Asia; a general scientific introduction for the succeeding chapters of this volume; and an overview of the methodology of metallogenic and tectonic analysis employed for Northeast Asia. The introduction also describes how a high-quality metallogenic and tectonic analysis, including synthesis of an associated metallogenic-tectonic model will greatly benefit refinement of mineral deposit models and deposit genesis; improvement of assessments of undiscovered mineral resources as part of quantitative mineral resource assessment studies; land-use and mineral exploration planning; improvement of interpretations of the origins of host rocks, mineral deposits, and metallogenic belts; and suggestions for new research. The compilation, synthesis, description, and interpretation of metallogenesis and tectonics of major regions, such as Northeast Asia (Eastern Russia, Mongolia, northern China, South Korea, and Japan) and the Circum-North Pacific (Russian Far East, Alaska, and Canadian Cordillera) requires a complex methodology. The methodology includes: (1) definitions of key terms; (2) compilation of a regional geologic base map that can be interpreted according to modern tectonic concepts and definitions; (3) compilation of a mineral deposit database that enables the determination of mineral deposit models, and relations of deposits to host rocks and tectonic origins; (4) synthesis of a series of mineral deposit models that characterize the known mineral deposits and inferred undiscovered deposits of the region; (5) compilation of a series of maps of metallogenic belts constructed on the regional geologic base map; and (6) formulation of a unified metallogenic and tectonic model. The summary of regional geology and metallogenesis in this introduction is based on publications of the major international collaborative studies of the metallogenesis and tectonics of Northeast Asia that were led by the U.S. Geological Survey. These studies have produced two broad types of publications. One type is a series of regional geologic, mineral deposit, and metallogenic belt maps and companion descriptions for the regions. Examples of major publications of this type are Obolenskiy and others (2003a, b, 2004), Parfenov and others (2003, 2004a, b), Nokleberg and others (2004), Rodionov and others (2004), and Naumova and others (2006). The other type is a suite of metallogenic and tectonic analyses of these same regions. Examples of major publications of this type are Rodionov and others (2004), Nokleberg and others (2000, 2004, 2005), and Naumova and others (2006). The Northeast Asia project area consists of eastern Russia (most of Siberia and most of the Russian Far East), Mongolia, Northern China, South Korea, Japan, and adjacent offshore areas. This area is approximately bounded by 30 to 82? N. latitude and 75 to 144? E. longitude. The major participating agencies are the Russian Academy of Sciences, Academy of Sciences of the Sakha Republic (Yakutia), VNIIOkeangeologia and Ministry of Natural Resources of the Russian Federation, Mongolian Academy of Sciences, Mongolian University of Science and Technology, Mongolian National University, Jilin University, Changchun, China, the China Geological Survey, the Korea Institute of Geosciences and Mineral Resources, the Geological Survey of Japan/AIST, University of Texas Arlington, and the U.S. Geological Survey. The Northeast Asia project extends and build on data and interpretations from a previous project on the Major Mineral Deposits, Metallogenesis, and Tectonics of the Russian Far East, Alaska, and the Canadian Cordillera that was conducted by the USGS, the Russian Academy of Sciences, the Alaska Division of Geological and Geophysical Surveys,

Open-File Report↗

USGS2008

Structure of the San Bernardino Basin along two seismic transects: Rialto-Colton Fault to the San Andreas Fault and along the I-215 Freeway (I-10 to SR30)

In this report, we present seismic data and acquisition parameters for two seismic profiles acquired in the San Bernardino, California area in May and October 2003. We refer to these seismic profiles as the San Bernardino Regional (SBR) and San Bernardino High-Resolution (SBHR) seismic profiles. We present both un-interpreted and interpreted seismic images so that the structure of the area can independently interpreted by others. We explain the rationale for our interpretations within the text of this report, and in addition, we provide a large body of supporting evidence. The SBR seismic profile extended across the San Bernardino Basin approximately N30?E from the town of Colton to the town of Highland. The data were acquired at night when the signal-to-noise ratios were reasonably good, and for the larger shots, seismic energy propagated across the ~20-km-long array. Tomographic velocity data are available to depths of about 4 km, and low-fold reflection data are available to depths in excess of 5 km. The SBR seismic data reveal an asymmetric, fault-bound basin to about 5 km depth. The SBHR seismic profile trended along the I-215 freeway from its intersection with the Santa Ana River to approximately State Road 30 in San Bernardino. Seismic data acquired along the I-215 freeway provide detailed images, with CDP spacing of approximately 2.5 m along an approximately 8.2-km-long profile; shot and geophone spacing was 5 m. For logistical reasons, the high-resolution (SBHR) seismic data were acquired during daylight hours on the shoulder of the I-215 freeway and within 5 to 10 m of high-traffic volumes, resulting in low signal-to-noise ratios. The limited offset at which refracted first-arrivals could be measured along the SBHR seismic profile limited our measurements of tomographic refraction velocities to relatively shallow (< 150 m) depths. The SBHR reflection data reveal a basin with complex structural details within the upper kilometer. The two seismic profiles show internal consistency and consistency with other existing geophysical data. Collectively, the data suggest that the I-215 freeway trends along the faulted edge of a pull-apart basin, within a zone where the principal slip of the San Jacinto Fault is transferred to the San Andreas Fault. Because the I-215 freeway trends at low angles to these flower-structure faults, both primary and numerous secondary faults are apparent between the I-10 exchange and State Road-30, suggesting that much of the 8-km-long segment of the I-215 freeway could experience movement along primary or secondary faults.

California↗