USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geothermics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57Linked to original sources
USGS2012

Geochemistry of thermal waters in Long Valley, Mono County, California

Thermal springs and wells in Long Valley, California, issue sodium bicarbonate‐chloride waters containing 1000–1420 mg/l of dissolved solids. Thermal waters of sodium bicarbonate‐chloride composition are usually associated with hot‐water reservoirs. Chloride concentrations and stable isotope data indicate that the thermal waters have had varied histories. All of the thermal springs issue a mixture of fluid from the thermal reservoir and less saline, cooler water from one or more shallow aquifers. The composition of springs in Hot Creek Gorge may have been further altered by minor subsurface boiling. Thermal springs between Hot Creek and Lake Crowley issue mixtures of fresh and thermal waters which have lost heat by conductive cooling and changed composition by reaction with rock in the shallow aquifer. The silica content of water from Magma Richie 5 and mixing calculations based on the concentrations of silica in thermal waters collected from springs in Hot Creek Gorge and along Little Hot Creek indicate a temperature of at least 200°C in the thermal reservoir. The sodium‐potassium‐calcium geothermometer yields a reservoir temperature estimate near 200°C for most of the thermal springs. If geothermal energy is developed in Long Valley, the high concentrations of arsenic (up to 2.2 mg/l), boron (up to 15 mg/l), and total dissolved solids in the thermal fluids will make it necessary to isolate the effluent of production wells from the freshwater system.

California↗
USGS2012

Late Cenozoic volcanism, geochronology, and structure of the Coso Range, Inyo County, California

The Coso Range lies at the west edge of the Great Basin, adjacent to the southern part of the Sierra Nevada. A basement complex of pre‐Cenozoic plutonic and metamorphic rocks is partly buried by ∼35 km 3 of late Cenozoic volcanic rocks that were erupted during two periods, as defined by K‐Ar dating: (1) 4.0–2.5 m.y., ∼31 km 3 of basalt, rhyodacite, dacite, andesite, and rhyolite, in descending order of abundance, and (2) ≤1.1 m.y., nearly equal amounts of basalt and rhyolite, most of the rhyolite being ≤0.3 m.y. old. Vents for the volcanic rocks of the younger period are localized on and near a horst of basement rocks within a concavity defined by the distribution of vents of the older period. The alignment of many vents and the presence of a considerable number of roughly north‐trending normal faults of late Cenozoic age reflect basin and range tectonics dominated by roughly east‐west lithospheric extension. Fumaroles, intermittently active thermal springs, and associated altered rocks occur within and immediately east of the central part of the field of Quaternary rhyolite, in an area characterized by various geophysical anomalies that are evidently related to an active hot‐water geothermal system. This system apparently is heated by a reservoir of silicic magma at ≥8‐km depth, itself produced and sustained through partial melting of crustal rocks by thermal energy contained in mantle‐derived basaltic magma that intrudes the crust in response to lithospheric extension.

California↗
USGS2012

Rapid intrusion of magma into wet rock: Groundwater flow due to pore pressure increases

Analytical and numerical solutions are developed to simulate the pressurization, expansion, and flow of groundwater contained within saturated, intact host rocks subject to sudden heating from the planar surface of an igneous intrusion. For most rocks, water diffuses more rapidly than heat, assuring that groundwater is not heated along a constant-volume pressure path and that thermal expansion and pressurization adjacent to the intrusion drives a flow that extends well beyond the heated region. The forcing parameter for pressurization and flow is α Δ T , where α is a thermal expansion coefficient reflecting the overall expansion of water heated through the temperature difference Δ T between the initial ambient and intrusive values. Pore pressure increases due to heating are greatest when the intrusion is emplaced rapidly and where the intrusive contact is impervious to groundwater contained in stiff, impermeable rocks with high thermal diffusivities and porosities. The maximum velocity of water flowing in pores decays with the inverse square root of time and is insensitive to hydraulic properties of the host rocks. Pressures are lessened and flow directions are reversed with the onset of hydrothermal convection. This occurs at times ranging from hours to weeks after onset of intrusion. As magma rises into near-surface rocks, steam can be generated. Solutions indicate that pressure increases and velocities are sensitive to the overall amount of expansion rather than the behavior of the water-steam transition. Both the overall thermal expansion coefficient α and the temperature difference Δ T are greater in shallow (<1 km) environments than in deep (∼5 km) ones. Thus, for rocks with similar transport properties, pressure increases due to heating are greatest in shallow environments. Although solutions can be applied to rocks with a wide variety of properties, pressure increases are calculated for compliant quartz-rich sedimentary rocks with a porosities between 1 and 20% and permeabilities between 1 darcy and 1 μdarcy, subject to temperature increases of 500 and 1000 K at depths ranging from 0.1 to 5 km in a region of hydrostatic pressures and normal geothermal gradient. Such rocks, with porosities greater than 5%, permeabilities less than a 0.1 mdarcy, and drained hydrostatic compressibilities of 10 −4 /MPa, undergo pressure increases greater than 10 MPa (100 bars)for conditions typical of water table depths of 2.5 km and heating to 500 K above ambient. Similar rocks, but with permeabilities less than 1 mdarcy, undergo pressure increases of 10 MPa for conditions typical of 1 km water table depth. Rocks commonly considered to be good aquifers undergo pressure increases of less than 1 MPa, primarily because of their high permeability. Although these estimates neglect the effects of fracturing and brecciation that may accompany such pressure increases, calculations indicate that pressure increases due to heating of cool groundwater can lead to failure of host rocks by a phreatic mechanism.

Journal of Geophysical Research Solid Earth↗
USGS2012

A seismic refraction survey of the Imperial Valley Region, California

The U.S. Geological Survey conducted an extensive seismic refraction survey in the Imperial Valley region of California in 1979. The Imperial Valley is located in the Salton Trough, an active rift between the Pacific and North American plates. Forty shots fired at seven shot points were recorded by 100 portable seismic instruments at typical spacing of 0.5–1 km. More than 1300 recording locations were occupied, and more than 3000 usable seismograms were obtained. We analyzed five profiles using a standard ray‐tracing program, constructed a contour map of reduced travel times from our most widely recorded shot point, and modeled an existing gravity profile across the Salton Trough. Results are itemized: (1) All models have in common a sedimentary layer ( V p = 1.8–5.0 km/s), a “transition zone” ( V p = 5.0–5.65 km/s), a basement ( V p = 5.65 km/s in the Imperial Valley, 5.9 km/s on the bordering mesas), and subbasement ( V p = 7.2 km/s). (2) The sedimentary layer ranges in thickness along the axis of the Salton Trough from 3.7 km (Salton Sea) to 4.8 km (U.S.‐Mexican border). On the bordering mesas it is quite variable in thickness. (3) The “transition” zone is about 1 km thick in most places. In the Imperial Valley there are no marked velocity discontinuities in this zone between the sedimentary layer and basement. On the bordering mesas, however, there is a discontinuity at the top of this zone. (4) There are apparently two types of basement. On the bordering mesas, basement is crystalline igneous and metamorphic rocks. In the Imperial Valley, basement is mostly lower‐greenshist‐facies sedimentary rocks, based primarily on the smooth transition in character from sediment to basement arrivals, the low value of basement velocity, and the fact that deep (4 km) wells in the valley penetrate only the upper part of the known Cenozoic stratigraphic column for the Salton Trough. (5) The subbasement, or intermediate crustal layer, ranges in depth along the axis of the Salton Trough from 16 km (Salton Sea) to 10 km (U.S.‐Mexican border). Gravity modeling requires that this layer deepen and/or pinch out beneath the bordering mesas and mountain ranges. Based on its high velocity and the presence of intrusive basaltic rocks in the sedimentary section in the Imperial Valley, the subbasement is thought to be a mafic intrusive complex similar to oceanic middle crust. (6) Several structures are seen that affect basement, transition zone, and deeper parts of the sedimentary layer. They include a scarp along the Imperial fault, as much as 1 km down to the northeast, and a scarp passing roughly along the topographic boundary between the Imperial Valley and the bordering mesa to the west, as much as 3½ km down to the east. We interpret the latter scarp to be the suture, or rift boundary, between the older crystalline basement on the mesa and the younger metasedimentary basement in the Imperial Valley. (7) On a contour map of reduced travel time from our most widely recorded shot point, subtle patches of early arrivals among otherwise late arrivals in the central Imperial Valley correlate well with known geothermal resource areas having reservoir temperatures of more than 150°C. Apparently the Salton Trough is a location where new crust is being generated. As the rift opens, mafic intrusive rocks fill it from below as sedimentary rocks fill it from above. Rifting and intrusion produce high heat flow that metamorphoses the sedimentary rocks to shallow depth (metasedimentary basement in the Imperial Valley) and thus consolidates the new crust.

California↗
USGS2012

Anomalous shear wave attenuation in the shallow crust beneath the Coso volcanic region, California

We use seismograms of local earthquakes to image relative shear wave attenuation structure in the shallow crust beneath the region containing the Coso volcanic-geothermal area of eastern California. SV and P wave amplitudes were measured from vertical component seismograms of earthquakes that occurred in the Cososouthem Sierra Nevada region from July 1983 to August 1985. Seismograms of 16 small earthquakes show SV amplitudes which are greatly diminished at some azimuths and takeoff angles, indicating strong lateral variations in S wave attenuation in the area. Three-dimensional images of the relative S wave attenuation structure are obtained from forward modeling and a back projection inversion of the amplitude data. The results indicate regions within a 20 by 30 by 10 km volume of the shallow crust (one shallower than 5 km) that severely attenuate SV waves passing through them. These anomalies lie beneath the Indian Wells Valley, 30 km south of the Coso volcanic field, and are coincident with the epicentral locations of recent earthquake swarms. No anomalous attenuation is seen beneath the Coso volcanic field above about 5 km depth. Geologic relations and the coincidence of anomalously slow P wave velocities suggest that the attenuation anomalies may be related to magmatism along the eastern Sierra front.

Journal of Geophysical Research Solid Earth↗
USGS2012

Conductive heat flux in VC-1 and the thermal regime of Valles caldera, Jemez Mountains, New Mexico

Over 5% of heat in the western United States is lost through Quaternary silicic volcanic centers, including the Valles caldera in north central New Mexico. These centers are the sites of major hydrothermal activity and upper crustal metamorphism, metasomatism, and mineralization, producing associated geothermal resources. We present new heat flow data from Valles caldera core hole 1 (VC-1), drilled in the southwestern margin of the Valles caldera. Thermal conductivities were measured on 55 segments of core from VC-1, waxed and wrapped to preserve fluids. These values were combined with temperature gradient data to calculate heat flow. Above 335 m, which is probably unsaturated, heat flow is 247±16 mW m −2 . The only deep temperature information available is from an uncalibrated commercial log made 19 months after drilling. Gradients, derived from uncalibrated temperature logs, and conductivities are inversely correlated between 335 and 737 m, indicating a conductive thermal regime, and component heat fluxes over three depth intervals (335–539 m, 549–628 m, and 628–737 m) are in excellent agreement with each other with an average of 504±15 mW m −2 . Temperature logs to 518 m depth with well-calibrated temperature sensors result in a revised heat flow of 463±15 mW m. We use shallow thermal gradient data from 75 other sites in and around the caldera to interpret the thermal regime at the VC-1 site. A critical review of published thermal conductivity data from the Valles caldera yields an average thermal conductivity of ≥1 W m −1 K −1 for the near-surface tuffaceous material, and we assume that shallow gradient values (°C km −1 ) are approximately numerically equal to heat flow (mW m −2 ). Heat loss from the caldera is asymmetrically distributed, with higher values (400 mW m −2 or higher) concentrated in the west-southwestern quadrant of the caldera. This quadrant also contains the main drainage from the caldera and the youngest volcanism associated with the caldera. We interpret the shallow thermal gradient data and the thermal regime at VC-1 to indicate a long-lived hydrothermal (and magmatic) system in the southwestern Valles caldera that has been maintained through the generation of shallow magma bodies during the long postcollapse history of the caldera. High heat flow at the VC-1 site is interpreted to result from hot water circulating below the base of the core hole, and we attribute the lower heat flow in the unsaturated zone to hydrologic recharge.

Journal of Geophysical Research Solid Earth↗
USGS2012

Geologic evidence for a magma chamber beneath Newberry Volcano, Oregon

At Newberry Volcano, central Oregon, more than 0.5 m.y. of magmatic activity, including caldera collapse and renewed caldera-filling volcanism, has created a structural and thermal chimney that channels magma ascent. Holocene rhyolitic eruptions (1) have been confined mainly within the caldera in an area 5 km in diameter, (2) have been very similar in chemical composition, phenocryst mineralogy, and eruptive style, and (3) have occurred as recently as 1300 years ago, with repose periods of 2000–3000 years between eruptions. Holocene basaltic andesite eruptions are widespread on the flanks but are excluded from the area of rhyolitic volcanism. Basaltic andesite in fissures at the edge of the rhyolite area has silicic inclusions and shows mixed basalt-rhyolite magma relations. These geologic relations and the high geothermal gradient that characterizes the lower part of a drill hole in the caldera (U.S. Geological Survey Newberry 2) indicate that a rhyolitic magma chamber has existed beneath the caldera throughout the Holocene. Its longevity probably is a result of intermittent underplating by basaltic magma.

Journal of Geophysical Research Solid Earth↗
USGS2012

Electrical structure of Newberry Volcano, Oregon

From the interpretation of magnetotelluric, transient electromagnetic, and Schlumberger resistivity soundings, the electrical structure of Newberry Volcano in central Oregon is found to consist of four units. From the surface downward, the geoelectrical units are (1) very resistive, young, unaltered volcanic rock, (2) a conductive layer of older volcanic material composed of altered tuffs, (3) a thick resistive layer thought to be in part intrusive rocks, and (4) a lower-crustal conductor. This model is similar to the regional geoelectrical structure found throughout the Cascade Range. Inside the caldera, the conductive second layer corresponds to the steep temperature gradient and alteration minerals observed in the USGS Newberry 2 test hole. Drill hole information on the south and north flanks of the volcano (test holes GEO N-1 and GEO N-3, respectively) indicates that outside the caldera the conductor is due to alteration minerals (primarily smectite) and not high-temperature pore fluids. On the flanks of Newberry the conductor is generally deeper than inside the caldera, and it deepens with distance from the summit. A notable exception to this pattern is seen just west of the caldera rim, where the conductive zone is shallower than at other flank locations. The volcano sits atop a rise in the resistive layer, interpreted to be due to intrusive rocks. The intrusive material has served as a heat source to produce enhanced hydrothermal alteration and, perhaps in the case of the west-flank anomaly, elevated fluid temperatures. While no public drill hole information is available to confirm this hypothesis, the west-flank anomaly appears to be a good geothermal target. In addition to the possibility that a region on the west side of the volcano could be favorable for prospecting, part of the resistive structure under the center of the volcano could be due to a vapor-dominated environment with temperatures above 300°C. In other parts of the Cascades, pervasive alteration has produced mixed layer clays and zeolites, resulting in low-resistivity anomalies. Low resistivities cannot be assumed to indicate high-temperature pore fluids. The use of electrical methods that measure resistivity as a function of excitation frequency, such as spectral induced polarization, may provide a way of obtaining information about the type and extent of alteration.

Journal of Geophysical Research Solid Earth↗
USGS2012

The hydrothermal system at Newberry Volcano, Oregon

Results of recent geological and geophysical studies at Newberry Volcano have been incorporated into conceptual and numerical models of a magma-based hydrothermal system. Numerical simulations begin with emplacement of a small magma body, the presumed source of silicic eruptions at Newberry that began about 10,000 B.P., into a thermal regime representing 100,000 years of cooling of a large underlying intrusion. Simulated flow patterns and thermal histories for three sets of hypothetical permeability values are compatible with data from four geothermal drill holes on the volcano. Meteoric recharge cools the caldera-fill deposits, but thermal water moving up a central conduit representing a permeable volcanic vent produces temperatures close to those observed in drill holes within the caldera. Meteoric recharge from the caldera moves down the flanks and creates a near-isothermal zone that extends several hundred meters below the water table, producing temperature profiles similar to those observed in drill holes on the flanks. The temperatures observed in drill holes on the flanks are not influenced by the postulated Holocene magma body. The elevated temperature gradients measured in the lower portions of these holes may be related to the cumulative effect of older intrusions. The models also indicate that meteoric recharge to the deep hydrothermal system probably originates within or near the caldera. Relatively low fluid velocities at depth suggest that at least a significant fraction of the thermal fluid may be very old.

Journal of Geophysical Research Solid Earth↗
USGS2012

Three-dimensional gravity modeling of the geologic structure of Long Valley caldera

A 48-mGal gravity low coincides with Long Valley caldera and is mainly attributed to low-density caldera fill. Gravity measurements by Unocal Geothermal have been integrated with U.S. Geological Survey data, vastly improving gravity station coverage throughout the caldera. A strong regional gravity trend is mainly attributed to isostasy. A “best fitting” (based on regional control of basement densities) Airy-Heiskanen isostatic model was used for the regional correction. A three-dimensional, multiple-unit gravity modeling program with iterative capabilities was developed to model the residual gravity. The density structure of Long Valley caldera and vicinity was modeled with 22 discrete density units, most of which were based on geologic units. Information from drill hole lithologies, surface geology, and structural geology interpretations constrain the model. Some important points revealed by the three-dimensional gravity modeling are that (1) the volume of ejected magma associated with the Bishop Tuff eruption is greater than previously thought, (2) the caldera structure is strongly influenced by precaldera topography and the extensions of major, active faults, (3) the main west ring fracture is coincident with the Inyo Domes-Mono Craters fracture system, (4) a relatively low-density region probably underlies the caldera, and (5) a silicic magma chamber may underlie Devils Postpile.

Journal of Geophysical Research Solid Earth↗
USGS2012

Active high-resolution seismic tomography of compressional wave velocity and attenuation structure at Medicine Lake Volcano, northern California Cascade Range

We determine compressional wave velocity and attenuation structures for the upper crust beneath Medicine Lake volcano in northeast California using a high-resolution active source seismic tomography method. Medicine Lake volcano is a basalt through rhyolite shield volcano of the Cascade Range, lying east of the range axis. The Pg wave from eight explosive sources which has traveled upward through the target volume to a dense array of 140 seismographs provides 1- to 2-km resolution in the upper 5 to 7 km of the crust beneath the volcano. The experiment tests the hypothesis that Cascade Range volcanoes of this type are underlain only by small silicic magma chambers. We image a low-velocity low- Q region not larger than a few tens of cubic kilometers in volume beneath the summit caldera, supporting the hypothesis. A shallower high-velocity high-density feature, previously known to be present, is imaged for the first time in full plan view; it is east-west elongate, paralleling a topographic lineament between Medicine Lake volcano and Mount Shasta. This lineament is interpreted to be the result of an old crustal weakness now affecting the emplacement of magma, both on direct ascent from the lower crust and mantle and in migration from the shallow silicic chamber to summit vents. Differences between this high-velocity feature and the equivalent feature at Newbeny volcano, a volcano in central Oregon resembling Medicine Lake volcano, may partly explain the scarcity of surface hydrothermal features at Medicine Lake volcano. A major low-velocity low- Q feature beneath the southeast flank of the volcano, in an area with no Holocene vents, is interpreted as tephra, flows, and sediments from the volcano deeply ponded on the downthrown side of the Gillem fault, a normal fault mapped at the surface north of the volcano. A high- Q normal-velocity feature beneath the north rim of the summit caldera may be a small, possibly hot, subsolidus intrusion. A high-velocity low- Q region beneath the eastern caldera may be an area of boiling water between the magma chamber and the ponded east flank material. These structural data are useful both for understanding Cascade Range volcanism and for geothermal development in progress on the volcano.

Journal of Geophysical Research Solid Earth↗
USGS2012

Post-11,000-year volcanism at Medicine Lake Volcano, Cascade Range, northern California

Eruptive activity during the past 11,000 years at Medicine Lake volcano has been episodic. Eight eruptions produced about 5.3 km 3 of basaltic lava during an interval of a few hundred years about 10,500 years B.P. After a hiatus of about 6000 years, eruptive activity resumed with a small andesite eruption at about 4300 years B.P. Approximately 2.5 km 3 of lava with compositions ranging from basalt to rhyolite vented in nine eruptions during an interval of about 3400 years in late Holocene time. The most recent eruption occurred about 900 years B.P. A compositional gap in SiO 2 values of erupted lavas occurs between 58 and 63%. The gap is spanned by chilled magmatic inclusions in late Holocene silicic lavas. Late Holocene andesitic to rhyolitic lavas were probably derived by fractionation, assimilation, and mixing from high-alumina basalt parental magma, possibly from basalt intruded into the volcano during the early mafic episode. Many basaltic to andesitic lavas contain iron-rich crystals and have high FeO*/MgO (characteristics caused by mixing of high-alumina basalt with ferrobasalt liquid produced by fractionation of parental high-alumina basalt). When ferrobasalt and high-alumina basalt are contaminated with a granitic crustal component, a calc-alkaline trend is produced. Some eruptions have produced both tholeiitic and calc-alkaline compositions. The eruptive activity is probably driven by intrusions of basalt that occur during east-west stretching of the crust in an extensional tectonic environment. Vents are typically aligned parallel or subparallel to major structural features, most commonly within 30° of north. Intruded magma should provide adequate heat for commercial geothermal development if sufficient fluids can be found. The nature and timing of future volcanic activity cannot be predicted from the observed pattern, but eruptions high on the edifice could produce high-silica products that might be accompanied by explosive activity, whereas eruptions lower on the flanks are likely to vent more fluid mafic lavas.

Journal of Geophysical Research Solid Earth↗
USGS2010

Geologic nozzles

Sonic velocities of geologic fluids, such as volcanic magmas and geothermal fluids, can be as low as 1 m/s. Critical velocities in large rivers can be of the order of 1–10 m/s. Because velocities of fluids moving in these settings can exceed these characteristic velocities, sonic and supersonic gas flow and critical and supercritical shallow-water flow can occur. The importance of the low characteristic velocities of geologic fluids has not been widely recognized, and as a result, the importance of supercritical and supersonic flow in geological processes has generally been underestimated. The lateral blast at Mount St. Helens, Washington, propelled a gas heavily laden with dust into the atmosphere. Because of the low sound speed in this gas (about 100 m/s), the flow was internally supersonic. Old Faithful Geyser, Wyoming, is a converging-diverging nozzle in which liquid water refilling the conduit during the recharge cycle changes during eruption into a two-phase liquid-vapor mixture with a very low sound velocity. The high sound speed of liquid water determines the characteristics of harmonic tremor observed at the gyeser during the recharge interval, whereas the low sound speed of the liquid-vapor mixture influences the fluid flow characteristics of the eruption. At the rapids of the Colorado River in the Grand Canyon, Arizona, the channel is constricted into the shape of a converging-diverging nozzle by debris flows that enter from tributary canyons. Both subcritical and supercritical flow occur within the rapids. The transport capacity in the rapids can be so great that the river contours the channel to a characteristic shape. This shape can be used to interpret the flood history of the Colorado River over the past 10³–10 5 years. The unity of fluid mechanics in these three natural phenomena is provided by the well-known analogy between gas flow and shallow-water flow in converging-diverging nozzles.

Arizona, Washington, Wyoming↗
USGS2014

Discussion of “expansion and increase in permeability of carbonate rocks on heating”

Maxwell and Verrall's interesting study raises a thought. If limestones expand on heating and thereby receive a permanent set, as this paper demonstrates, do we not have here a means of determining the maximum temperature to which a particular limestone was ever subjected and indirectly thereby its maximum depth of burial or other geothermal events in its history?

Eos, Transactions, American Geophysical Union↗
USGS2010

Laboratory investigations of steam flow in a porous medium

Experiments were carried out in the laboratory to test a theory of transient flow of pure steam in a uniform porous medium. This theory is used in modeling pressure transient behavior in vapor dominated geothermal systems. Transient, superheated steam flow experiments were run by bringing a cylinder of porous material to a uniform initial pressure and then making a step increase in pressure at one end of the sample while monitoring the pressure transient breakthrough at the other end. It was found in experiments run at 100°, 125°, and 146°C that the time required for steam pressure transients to propagate through an unconsolidated material containing sand, silt, and clay was 10–25 times longer than predicted by conventional superheated steam flow theory. It is hypothesized that the delay in the steam pressure transient was caused by adsorption of steam in the porous sample. In order to account for steam adsorption, a sink term was included in the conservation of mass equation. In addition, energy transfer in the system has to be considered because latent heat is released when steam adsorption occurs, increasing the sample temperature by as much as 10°C. Finally, it was recognized that the steam pressure was a function of both the temperature and the amount of adsorption in the sample. This function was assumed to be an equilibrium adsorption isotherm, which was determined by experiment. By solving the modified mass and energy equations numerically, subject to the empirical adsorption isotherm relationship, excellent theoretical simulation of the experiments was achieved.

Water Resources Research↗
USGS1989

Boron isotope evidence for the involvement of non-marine evaporites in the origin of the Broken Hill ore deposits

Identifying the palaeogeographic setting and mode of origin of stratabound ore deposits can be difficult in high-grade metamorphic terranes, where the effects of metamorphism may obscure the nature of the protoliths. Here we report boron isotope data for tourmalines from the early Proterozoic Broken Hill block, in Australia, which hosts giant lead-zinc-silver sulphide deposits. With one exception the 11 B/ 10 B ratios are lower than those for all other tourmalines from massive sulphide deposits and tour-malinites elsewhere in the world. We propose that these low ratios reflect leaching of boron from non-marine evaporitic borates by convecting hydrothermal fluids associated with early Proterozoic continental rifting. A possible modern analogue is the Salton Sea geothermal field in California.

Nature↗
USGS1994

Increased pressure from rising bubbles as a mechanism for remotely triggered seismicity

Aftershocks of large earthquakes tend to occur close to the main rupture zone, and can be used to constrain its dimensions. But following the 1992 Landers earthquake (magnitude M(w) = 7.3) in southern California, many aftershocks were reported in areas remote from the mainshock. Intriguingly, this remote seismicity occurred in small clusters near active volcanic and geothermal systems. For one of these clusters (Long Valley, about 400 km from the Landers earthquake), crustal deformation associated with the seismic activity was also monitored. Here we argue that advective overpressure provides a viable mechanism for remote seismicity triggered by the Landers earthquake. Both the deformation and seismicity data are consistent with pressure increases owing to gas bubbles rising slowly within a volume of magma. These bubbles may have been shaken loose during the passage of seismic waves generated by the mainshock.

Nature↗
USGS2002

A hydrogen-based subsurface microbial community dominated by methanogens

The search for extraterrestrial life may be facilitated if ecosystems can be found on Earth that exist under conditions analogous to those present on other planets or moons. It has been proposed, on the basis of geochemical and thermodynamic considerations, that geologically derived hydrogen might support subsurface microbial communities on Mars and Europa in which methanogens form the base of the ecosystem1-5. Here we describe a unique subsurface microbial community in which hydrogen-consuming, methane-producing Archaea far outnumber the Bacteria. More than 90% of the 16s ribosomal DNA sequences recovered from hydrothermal waters circulating through deeply buried igneous rocks in Idaho are related to hydrogen-using methanogenic microorganisms. Geochemical characterization indicates that geothermal hydrogen, not organic carbon, is the primary energy source for this methanogen-dominated microbial community. These results demonstrate that hydrogen-based methanogenic communities do occur in Earth's subsurface, providing an analogue for possible subsurface microbial ecosystems on other planets.

Nature↗