SEARCH · USGS Science

Results for “Energy Sources”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57Linked to original sources

USGS1962

Ground-water investigations of the Project Gnome area, Eddy and Lea Counties, New Mexico

The U.S. Atomic Energy Commission, through the Office of Test Operations, Albuquerque Operations Office, plans to detonate a nuclear device in a massive salt bed 1,200 feet beneath the land surface. The project, known as Project Gnome, is an element of the Plowshare program--a study of peacetime applications of nuclear fission. The location of the proposed underground shot is in a sparsely-populated area in southeastern Eddy County, N. Mex., east of the Pecos River and about 25 miles southeast of the city of Carlsbad. The area is arid to Semiarid and ground water is a vital factor in the economic utilization of the land, which is primarily used for stock raising. An investigation of the Project Gnome site and surrounding area for the purposes of evaluating the ground-water resources and the possible effect upon them from the detonation of the nuclear shot was desired by the Commission. This report describes work done by the U.S. Geological Survey on behalf of the Commission and presents results of the investigation of the ground-water resources and geology of the area. The most intensive investigations were made within a 15-mile radius of the site of Project Gnome and mainly on the east side of the Pecos River. The total area of study of over 1,200 square miles includes parts of Eddy and Lea Counties, N. Mex. The Project Gnome site is in the sedimentary Delaware Basin. It is underlain by about 18,000 feet of sedimentary rocks ranging in age from Ordovician to Recent. Upper Permian evaporitic rocks, which contain the principal source of potash available in the United States, are worked in nearby mines. The potash minerals are found in a massive salt bed about 1,400 feet thick in the Salado Formation of Permian age. The land surface of the area is covered mostly by a wind-blown sand and caliche; however, rocks of the Rustler Formation of Permian age and younger rocks of Permian, Triassic, Pleistocene(?) and Recent age crop out at several localities. Solution by ground water of salt at the top of the Salado Formation and of anhydrite within the Rustler Formation has removed thick sections of these rocks. A subsequent lowering of the land surface and differential collapse of the Rustler has formed many sinkholes and has created a karst topography over much of the western part of the area. Ground water is obtained from rocks of Permian, Triassic, Tertiary, and Quaternary age in the general region. However, the only aquifer at the Gnome site is the Culebra Dolomite Member of the Rustler Formation of Permian age. The aquifer is about 500 feet beneath the surface at the site and is about 30 feet thick. An aquifer, immediately above the top of the salt, contains a brine solution in Nash Draw, a few miles west of the Gnome site. This aquifer discharges into the Pecos River and is a major source of contamination of the river water. No potable water is known to be present in the area below the top of the salt of the Salado Formation. The ground water in the area is generally under artesian pressure. The general direction of ground-water movement is toward the Pecos River both east and west of the river. At the Gnome site the artesian head of the water in the Culebra Dolomite Member is about 7.5 feet. The water moves westward through the aquifer at a rate of about ? foot per day. The most widespread utilization of ground water east of the river is for stock use. Irrigation usage west of the Pecos River accounts for the largest withdrawal of water. Wells range in depth from a few tens of feet to nearly 800 feet. Water levels range from a few feet to about 500 feet below the surface. A test well at the Gnome site drawing water from the Culebra Dolomite Member was pumped at a rate of 100 gpm (gallons per minute); however, most wells east of the river yield only a few gpm. Irrigation wells west of the river yield as much as 3,500 gpm. Most of the water in the area is highly mineralized and is suitable only for use by livest

Open-File Report↗

USGS2024

Terrebonne Basin northern Gulf of Mexico, 30 July-28 September 2023

In the summer and fall of 2023, the Gulf of Mexico Deepwater Hydrate Coring Expedition (UT-GOM2-2) drilled, cored, made downhole measurements, and analyzed samples from the seafloor to the base of the gas hydrate stability zone in one location (Site H, WR313) in the Terrebonne basin, deepwater Gulf of Mexico. Analyses of data and samples from the expedition will inform biological, geochemical, and geomechanical models to constrain the role of gas hydrates in the carbon cycle and the potential for gas hydrates as an energy resource. Pressure and conventional cores were collected continuously to a depth of 155.1 meters below the seafloor (mbsf). At deeper depths, cores were taken periodically from hydrate-bearing sands and their bounding muds to a total depth of 861.3 mbsf. 162.6 m of conventional core and 54.8 m of pressure core were obtained. Twelve temperature measurements were made between 27.1 and 144.5 mbsf to determine the geothermal gradient. At the seafloor, more than 4 m of sandy silt of unknown origin was encountered. Beneath this sand, to a depth of ~200 mbsf, the section was composed of interbedded mud and biogenic carbonate ooze. The biogenic ooze correlated to low density and high porosity intervals observed in the previously acquired logging while drilling (LWD) data and as measured. Calcareous nannofossil biostratigraphy constrains the entire record to the Pleistocene (< 0.91 million years) with a pronounced increase in sedimentation rate with depth. Beneath 200 mbsf, the section was predominantly composed of mud with two thicker, hydrate-bearing coarse-grained intervals, which are commonly known as the Blue and Orange sands. The dissolved gas concentration was quantified from pressure cores. In the shallow section, dissolved methane concentration increased below the sulfate-methane transition zone (SMTZ) and reaches saturation (the limit of solubility for methane) at 147 mbsf. Gas expansion was very common in conventional and depressurized pressure (conventionalized) cores below the SMTZ. At deeper depths, the methane concentration within muds bounding the Blue and Orange reservoirs was generally found to be less than saturation. The dissolved and hydrate gas composition is consistent with a microbial source, containing greater than 99.99% methane and only trace concentrations of ethane, propane, and butane. The methane to ethane ratio (C 1 /C 2 ) and the methane to ethane plus propane (C 1 /(C 2 +C 3 )) decrease with depth down to at least 678 mbsf, mainly driven by the increase in ethane with depth. It is unclear if this trend continues through the Orange sand interval. The δ 13 C isotopic signature of methane ranges between -69.9 and -78.5 ‰ Vienna Pee Dee Belemnite (VPDB). Pressure core recovery of all sandy intervals was poor. However, pressure core logs of the Orange sand show intervals of low density and high velocity, which are indicative of high hydrate saturation. One core from within the Orange sand was composed of interbedded graded sandy silt and mud. The sandy silts from this core are composed of mainly quartz and feldspar with some lithics. Most of the recovered pressure core samples are maintained at near in-situ pressure and temperature (within the hydrate stability field) at the University of Texas Pressure Core Center awaiting analysis. In the shallow section, samples will be used to determine the flux of organic carbon through the basin system, find the rate at which that carbon was consumed, and understand the microbial population responsible for these processes. In the deeper section, samples from in and around the hydrate reservoirs will be used to determine the petrophysical properties of the reservoir and bounding seals in these systems.

Gulf of Mexico, Terrebonne Basin↗

USGS2008

Compilation of surface creep on California faults and comparison of WGCEP 2007 deformation model to Pacific-North American plate Mmtion

This Appendix contains 3 sections that 1) documents published observations of surface creep on California faults, 2) constructs line integrals across the WG-07 deformation model to compare to the Pacific - North America plate motion, and 3) constructs strain tensors of volumes across the WG-07 deformation model to compare to the Pacific - North America plate motion. Observation of creep on faults is a critical part of our earthquake rupture model because if a fault is observed to creep the moment released as earthquakes is reduced from what would be inferred directly from the fault's slip rate. There is considerable debate about how representative creep measured at the surface during a short time period is of the whole fault surface through the entire seismic cycle (e.g. Hudnut and Clark, 1989). Observationally, it is clear that the amount of creep varies spatially and temporally on a fault. However, from a practical point of view a single creep rate is associated with a fault section and the reduction in seismic moment generated by the fault is accommodated in seismic hazard models by reducing the surface area that generates earthquakes or by reducing the slip rate that is converted into seismic energy. WG-07 decided to follow the practice of past Working Groups and the National Seismic Hazard Map and used creep rate (where it was judged to be interseismic, see Table P1) to reduce the area of the fault surface that generates seismic events. In addition to following past practice, this decision allowed the Working Group to use a reduction of slip rate as a separate factor to accommodate aftershocks, post seismic slip, possible aseismic permanent deformation along fault zones and other processes that are inferred to affect the entire surface area of a fault, and thus are better modeled as a reduction in slip rate. C-zones are also handled by a reduction in slip rate, because they are inferred to include regions of widely distributed shear that is not completely expressed as earthquakes large enough to model. Because the ratio of the rate of creep relative to the total slip rate is often used to infer the average depth of creep, the depth of creep can be calculated and used to reduce the surface area of a fault that generates earthquakes in our model. This reduction of surface area of rupture is described by an aseismicity factor, assigned to each creeping fault in Appendix A. An aseismicity factor of less than 1 is only assigned to faults that are inferred to creep during the entire interseismic period. A single aseismicity factor was chosen for each section of the fault that creeps by expert opinion from the observations documented here. Uncertainties were not determined for the aseismicity factor, and thus it represents an unmodeled (and difficult to model) source of error. This Appendix simply provides the documentation of known creep, the type and precision of its measurement, and attempts to characterize the creep as interseismic, afterslip, transient or triggered. Parts 2 and 3 of this Appendix compare the WG-07 deformation model and the seismic source model it generates to the strain generated by the Pacific - North American plate motion. The concept is that plate motion generates essentially all of the elastic strain in the vicinity of the plate boundary that can be released as earthquakes. Adding up the slip rates on faults and all others sources of deformation (such as C-zones and distributed background seismicity) should approximately yield the plate motion. This addition is usually accomplished by one of four approaches: 1) line integrals that sum deformation along discrete paths through the deforming zone between the two plates, 2) seismic moment tensors that add up seismic moment of a representative set of earthquakes generated by a crustal volume spanning the plate boundary, 3) strain tensors generated by adding up the strain associated with all of the faults in a crustal volume spanning the plate

Open-File Report↗

USGS2004

Ground-water pumpage and artificial recharge estimates for calendar year 2000 and average annual natural recharge and interbasin flow by hydrographic area, Nevada

Nevada's reliance on ground-water resources has increased because of increased development and surface-water resources being fully appropriated. The need to accurately quantify Nevada's water resources and water use is more critical than ever to meet future demands. Estimated ground-water pumpage, artificial and natural recharge, and interbasin flow can be used to help evaluate stresses on aquifer systems. In this report, estimates of ground-water pumpage and artificial recharge during calendar year 2000 were made using data from a variety of sources, such as reported estimates and estimates made using Landsat satellite imagery. Average annual natural recharge and interbasin flow were compiled from published reports. An estimated 1,427,100 acre-feet of ground water was pumped in Nevada during calendar year 2000. This total was calculated by summing six categories of ground-water pumpage, based on water use. Total artificial recharge during 2000 was about 145,970 acre-feet. At least one estimate of natural recharge was available for 209 of the 232 hydrographic areas (HAs). Natural recharge for the 209 HAs ranges from 1,793,420 to 2,583,150 acre-feet. Estimates of interbasin flow were available for 151 HAs. The categories and their percentage of the total ground-water pumpage are irrigation and stock watering (47 percent), mining (26 percent), water systems (14 percent), geothermal production (8 percent), self-supplied domestic (4 percent), and miscellaneous (less than 1 percent). Pumpage in the top 10 HAs accounted for about 49 percent of the total ground-water pumpage. The most ground-water pumpage in an HA was due to mining in Pumpernickel Valley (HA 65), Boulder Flat (HA 61), and Lower Reese River Valley (HA 59). Pumpage by water systems in Las Vegas Valley (HA 212) and Truckee Meadows (HA 87) were the fourth and fifth highest pumpage in 2000, respectively. Irrigation and stock watering pumpage accounted for most ground-water withdrawals in the HAs with the sixth through ninth highest pumpage. Geothermal production accounted for most pumpage in the Carson Desert (HA 101). Reinjection of ground water pumped for geothermal energy production accounted for about 64 percent (93,310 acre-feet) of the total artificial recharge. The only artificial recharge by water systems was in Las Vegas Valley, where 29,790 acre-feet of water from the Colorado River was injected into the aquifer system. Artificial recharge by mining totaled 22,870 acre-feet. Net ground-water flow was estimated only for the 143 HAs with available estimates of both natural recharge and interbasin flow. Of the 143 estimates, 58 have negative net ground-water flow, indicating that ground-water storage could be depleted if pumpage continues at the same rate. The State has designated HAs where permitted ground-water rights approach or exceed the estimated average annual recharge. Ten HAs were identified that are not designated and have a net ground-water flow between -1,000 to -35,000 acre-feet. Due to uncertainties in recharge, the water budgets for these HAs may need refining to determine if ground-water storage is being depleted.

Nevada↗

USGS2018

Executive summary. In Second State of the Carbon Cycle Report (SOCCR2): A Sustained Assessment Report

Central to life on Earth, carbon is essential to the molecular makeup of all living things and plays a key role in regulating global climate. To understand carbon’s role in these processes, researchers measure and evaluate carbon stocks and fluxes. A stock is the quantity of carbon contained in a pool or reservoir in the Earth system (e.g., carbon in forest trees), and a flux is the direction and rate of carbon’s transfer between pools (e.g., the movement of carbon from the atmosphere into forest trees during photosynthesis). This document, the Second State of the Carbon Cycle Report (SOCCR2), examines the patterns of carbon stocks and fluxes—collectively called the “carbon cycle.” Emphasis is given to these patterns in specific sectors (e.g., agriculture and energy) and ecosystems (e.g., forests and coastal waters) and to the response of the carbon cycle to human activity. The purpose of SOCCR2 is to assess the current state of the North American carbon cycle and to present recent advances in understanding the factors that influence it. Concentrating on North America—Canada, the United States, and Mexico—the report describes carbon cycling for air, land, inland waters (streams, rivers, lakes, and reservoirs), and coastal waters (see Figure ES.1, p. 23). The questions framing the publication A U.S. Carbon Cycle Science Plan (Michalak et al., 2011) inspired development of three slightly modified questions that guide SOCCR2’s content and focus on North America in a global context: How have natural processes and human actions affected the global carbon cycle on land, in the atmosphere, in the ocean and other aquatic systems, and at ecosystem interfaces (e.g., coastal, wetland, and urban-rural)? How have socioeconomic trends affected atmospheric levels of the primary carbon-containing gases, carbon dioxide (CO2) and methane (CH4)? How have species, ecosystems, natural resources, and human systems been impacted by increasing greenhouse gas (GHG) concentrations, associated changes in climate, and carbon management decisions and practices? SOCCR2 synthesizes the most recent understanding of carbon cycling in North America, assessing new carbon cycle findings and information, the state of knowledge regarding core methods used to study the carbon cycle, and future research needed to best inform carbon management and policy options. Focusing on scientific developments in the decade since the First State of the Carbon Cycle Report (SOCCR1; CCSP 2007), SOCCR2 summarizes the past, current, and projected state of carbon sources, sinks, and natural processes, as well as contributions by human activities. In addition to CO2 and CH4, the report sometimes discusses nitrous oxide (N2O), a GHG associated with activities and processes that affect fluxes of carbon gases.1 SOCCR2 also describes improvements in analysis tools; developments in decision support; and new insights into ecosystem carbon cycling, human causes of changes in the carbon cycle, and social science perspectives on carbon. Since publication of SOCCR1, coordinated research from agencies in the three North American countries has enabled innovative observational, analytical, and modeling capabilities to further advance understanding of the North American carbon cycle (see Appendix D: Carbon Measurement Approaches and Accounting Frameworks, p. 834). Some of the report’s main conclusions, based on the Key Findings of each chapter, are highlighted in Box ES.1, Main Findings of SOCCR2, p. 24.

Report↗

USGS2016

Soil phosphorus cycling in tropical soils: An ultisol and oxisol perspective

Phosphorus (P) is essential for life. It is the backbone of our DNA, provides energy for biological reactions, and is an integral component of cell membranes. As such, it is no surprise that P availability plays a strong role in regulating ecosystem structure and function (Wassen et al. 2005, Elser et al. 2007, Condit et al. 2013), and in determining our capacity to grow food for a burgeoning human population (Sharpley et al. 1997, Sims and Sharpley 2005, Lal 2009). Concerns that P supplies are insufficient to meet our species’ growing demands are on the rise (Richardson and Simpson 2011) and scientific and media outlets increasingly discuss P as an element worthy of our attention and concern (e.g., Cordell et al. 2009, Lougheed 2011, Edixhoven et al. 2013, Ulrich et al. 2013). Indeed, a number of groups are calling for the explicit stewardship of our planet’s P stocks (Schipper 2014, Withers et al. 2015). Yet a focus on P as a vital and limited resource is not new in the tropics, where an abundance of soils characterized by low P has resulted in a substantial, longstanding reliance on P inputs for tropical ecosystem function in both unmanaged and agriculture settings (Table 1, Figure 2; Sanchez 1976, Swap et al. 1992, Chadwick et al. 1999, Okin et al. 2004, Lal 2009). Indeed, there is a long history of cultivation in the tropics, where for thousands of years land management practices have included methods that effectively modify P availability for plant growth (e.g., Giardina et al. 2000, Lawrence and Schlesinger 2001, Vitousek et al. 2004, Lewis et al. 2015). Nevertheless, low soil fertility in tropical systems where fertilizer is scarce has enduringly been recognized as a major source of hunger and starvation (Sanchez and Buol 1975, Sanchez 2002, Sanchez and Swaminathan 2005).

Book chapter↗

USGS2008

GIS Representation of Coal-Bearing Areas in Africa

The African continent contains approximately 5 percent of the world's proven recoverable reserves of coal (World Energy Council, 2007). Energy consumption in Africa is projected to grow at an annual rate of 2.3 percent from 2004 through 2030, while average consumption in first-world nations is expected to rise at 1.4 percent annually (Energy Information Administration, 2007). Coal reserves will undoubtedly continue to be part of Africa's energy portfolio as it grows in the future. A review of academic and industrial literature indicates that 27 nations in Africa contain coal-bearing rock. South Africa accounts for 96 percent of Africa's total proven recoverable coal reserves, ranking it sixth in the world. This report is a digital compilation of information on Africa's coal-bearing geology found in the literature and is intended to be used in small scale spatial investigations in a Geographic Information System (GIS) and as a visual aid for the discussion of Africa's coal resources. Many maps of African coal resources often include points for mine locations or regional scale polygons with generalized borders depicting basin edges. Point locations are detailed but provide no information regarding extent, and generalized polygons do not have sufficient detail. In this dataset, the polygons are representative of the actual coal-bearing lithology both in location and regional extent. Existing U.S. Geological Survey (USGS) digital geology datasets provide the majority of the base geologic polygons. Polygons for the coal-bearing localities were clipped from the base geology that represented the age and extent of the coal deposit as indicated in the literature. Where the 1:5,000,000-scale geology base layer's ages conflicted with those in the publications, polygons were generated directly from the regional African coal maps (1:500,000 scale, approximately) in the published material. In these cases, coal-bearing polygons were clipped to the literature's indicated coal extent, without regard to the underlying geology base or topographic constraints. Indication of the presence of African coal is based on multiple sources. However, the quality of the sources varies and there is often disagreement in the literature. This dataset includes the rank, age, and location of coal in Africa as well as the detailed source information responsible for each coal-bearing polygon. The dataset is not appropriate for use in resource assessments of any kind. Attributes necessary for tasks, such as number of coal seams, thickness of seams, and depth to coal are rarely provided in the literature and accordingly not represented in this data set. Small-scale investigations, representations and display uses are most appropriate for this product. This product is the first to show coal distribution as bounded by actual geologic contacts for the entire African continent. In addition to the spatial component of this dataset, complete references to source material are provided for each polygon, making this product a useful first step resource in African coal research. Greater detail regarding the creation of this dataset as well as the sources used is provided in the metadata file for the Africa_coal.shp file.

Open-File Report↗

USGS2011

Setting limits: Using air pollution thresholds to protect and restore U.S. ecosystems

More than four decades of research provide unequivocal evidence that sulfur, nitrogen, and mercury pollution have altered, and will continue to alter, our nation's lands and waters. The emission and deposition of air pollutants harm native plants and animals, degrade water quality, affect forest productivity, and are damaging to human health. Many air quality policies limit emissions at the source but these control measures do not always consider ecosystem impacts. Air pollution thresholds at which ecological effects are observed, such as critical loads, are effective tools for assessing the impacts of air pollution on essential ecosystem services and for informing public policy. U.S. ecosystems can be more effectively protected and restored by using a combination of emissions-based approaches and science-based thresholds of ecosystem damage. Based on the results of a comprehensive review of air pollution thresholds, we conclude: ??? Ecosystem services such as air and water purification, decomposition and detoxification of waste materials, climate regulation, regeneration of soil fertility, production and biodiversity maintenance, as well as crop, timber and fish supplies are impacted by deposition of nitrogen, sulfur, mercury and other pollutants. The consequences of these changes may be difficult or impossible to reverse as impacts cascade throughout affected ecosystems. ??? The effects of too much nitrogen are common across the U.S. and include altered plant and lichen communities, enhanced growth of invasive species, eutrophication and acidification of lands and waters, and habitat deterioration for native species, including endangered species. ??? Lake, stream and soil acidification is widespread across the eastern United States. Up to 65% of lakes within sensitive areas receive acid deposition that exceeds critical loads. ??? Mercury contamination adversely affects fish in many inland and coastal waters. Fish consumption advisories for mercury exist in all 50 states and on many tribal lands. High concentrations of mercury in wildlife are also widespread and have multiple adverse effects. ??? Air quality programs, such as those stemming from the 1990 Clean Air Act Amendments, have helped decrease air pollution even as population and energy demand have increased. Yet, they do not adequately protect ecosystems from long-term damage. Moreover they do not address ammonia emissions. ??? A stronger ecosystem basis for air pollutant policies could be established through adoption of science-based thresholds. Existing monitoring programs track vital information needed to measure the response to policies, and could be expanded to include appropriate chemical and biological indicators for terrestrial and aquatic ecosystems and establishment of a national ecosystem monitoring network for mercury. The development and use of air pollution thresholds for ecosystem protection and management is increasing in the United States, yet threshold approaches remain underutilized. Ecological thresholds for air pollution, such as critical loads for nitrogen and sulfur deposition, are not currently included in the formal regulatory process for emissions controls in the United States, although they are now considered in local management decisions by the National Park Service and U.S. Forest Service. Ecological thresholds offer a scientifically sound approach to protecting and restoring U.S. ecosystems and an important tool for natural resource management and policy. ?? The Ecological Society of America.

Issues in Ecology↗

USGS2012

Role of stranded gas from Central Asia, Russia, Southeast Asia, and Australia in meeting Asia’s future demand for gas imports

Demand for natural gas is increasing more rapidly than anticipated in Far East markets because (1) China has modified its policies in order to increase reliance on gas, in part to mitigate the growth in its coal consumption (which now stand at almost half of world coal production), (2) Japan has announced its intention to eventually shutdown its nuclear power industry, and (3) India, which currently has more than 400 million people without electricity, desires to accelerate electrification. This analysis investigates the potential role of stranded gas from Central Asia, Russia, Southeast Asia, and Australia in meeting Asia's future demand for gas imports. It initially surveys the discovered or known gas in stranded gas accumulations in Central Asia, Russia, Australia, Indonesia, and Malaysia. It then examines the primary gas import markets of China, India, Japan, and South Korea by describing energy use, gas demand trends, and domestic gas supplies to establish boundaries that encompass the wide variation in gas import demands in these markets during the two decades following 2020. Then the cost of developing and delivering gas through overland pipelines from selected stranded gas fields in Central Asia and Russia to China is examined. Analysis shows that for the Shanghai market in China, the costs of developing and delivering Russia's stranded gas from the petroleum provinces of eastern Siberia are competitive with costs estimated for stranded gas from Central Asia. However, for the Western Siberian Basin, delivered gas costs are at least 3 US dollars per thousand cubic feet (USD/Mcf) higher than delivered gas from Central Asia. The extraction and transport costs to a liquefaction plant for gas from stranded gas fields located in Australia, Indonesia, Malaysia, and the basins of eastern Siberia are then evaluated. The resource cost functions presented show development and extraction costs as a function of the volume of stranded gas developed for each country. The analysis demonstrates that, although the Russian fields in areas of eastern Siberia are large with relatively low extraction costs, distances to a potential liquefaction plant at Vladivostok make them initially the high cost suppliers of the liquefied natural gas (LNG) market. For the LNG markets examined, Australia and Malaysia are initially the lowest cost suppliers. For the Shanghai market, a comparison of the cost of supplying gas by pipeline with the cost of supplying LNG shows that the pipeline costs from areas of eastern Siberia and Central Asia are generally lower than delivered cost of gas as LNG from the LNG supply sources considered.

Central Asia, Southeast Asia↗

USGS2002

Three-dimensional hydrogeologic framework model for use with a steady-state numerical ground-water flow model of the Death Valley regional flow system, Nevada and California

The U.S. Geological Survey, in cooperation with the Department of Energy and other Federal, State, and local agencies, is evaluating the hydrogeologic characteristics of the Death Valley regional ground-water flow system. The ground-water flow system covers an area of about 100,000 square kilometers from latitude 35? to 38?15' North to longitude 115? to 118? West, with the flow system proper comprising about 45,000 square kilometers. The Death Valley regional ground-water flow system is one of the larger flow systems within the Southwestern United States and includes in its boundaries the Nevada Test Site, Yucca Mountain, and much of Death Valley. Part of this study includes the construction of a three-dimensional hydrogeologic framework model to serve as the foundation for the development of a steady-state regional ground-water flow model. The digital framework model provides a computer-based description of the geometry and composition of the hydrogeologic units that control regional flow. The framework model of the region was constructed by merging two previous framework models constructed for the Yucca Mountain Project and the Environmental Restoration Program Underground Test Area studies at the Nevada Test Site. The hydrologic characteristics of the region result from a currently arid climate and complex geology. Interbasinal regional ground-water flow occurs through a thick carbonate-rock sequence of Paleozoic age, a locally thick volcanic-rock sequence of Tertiary age, and basin-fill alluvium of Tertiary and Quaternary age. Throughout the system, deep and shallow ground-water flow may be controlled by extensive and pervasive regional and local faults and fractures. The framework model was constructed using data from several sources to define the geometry of the regional hydrogeologic units. These data sources include (1) a 1:250,000-scale hydrogeologic-map compilation of the region; (2) regional-scale geologic cross sections; (3) borehole information, and (4) gridded surfaces from a previous three-dimensional geologic model. In addition, digital elevation model data were used in conjunction with these data to define ground-surface altitudes. These data, properly oriented in three dimensions by using geographic information systems, were combined and gridded to produce the upper surfaces of the hydrogeologic units used in the flow model. The final geometry of the framework model is constructed as a volumetric model by incorporating the intersections of these gridded surfaces and by applying fault truncation rules to structural features from the geologic map and cross sections. The cells defining the geometry of the hydrogeologic framework model can be assigned several attributes such as lithology, hydrogeologic unit, thickness, and top and bottom altitudes.

Water-Resources Investigations Report↗

USGS2012

Coupling of volatile transport and internal heat flow on Triton

Recently Brown et al. (1991) showed that Triton's internal heat source could amount to 5–20% of the absorbed insolation on Triton, thus significantly affecting volatile transport and atmospheric pressure. Subsequently, Kirk and Brown (1991a) used simple analytical models of the effect of internal heat on the distribution of volatiles on Triton's surface, confirming the speculation of Brown et al. that Triton's internal heat flow could strongly couple to the surface volatile distribution. To further explore this idea, we present numerical models of the permanent distribution of nitrogen ice on Triton that include the effects of sunlight, the two‐dimensional distribution of internal heat flow, the coupling of internal heat flow to the surface distribution of nitrogen ice, and the finite viscosity of nitrogen ice. From these models we conclude that: (1) The strong vertical thermal gradient induced in Triton's polar caps by internal heat‐flow facilitates viscous spreading to lower latitudes, thus opposing the poleward transport of volatiles by sunlight, and, for plausible viscosities and nitrogen inventories, producing permanent caps of considerable latitudinal extent; (2) It is probable that there is a strong coupling between the surface distribution of nitrogen ice on Triton and internal heat flow; (3) Asymmetries in the spatial distribution of Triton's heat flow, possibly driven by large‐scale, volcanic activity or convection in Triton's interior, can result in permanent polar caps of unequal latitudinal extent, including the case of only one permanent polar cap; (4) Melting at the base of a permanent polar cap on Triton caused by internal heat flow can significantly enhance viscous spreading, and, as an alternative to the solid‐state greenhouse mechanism proposed by Brown et al. (1990), could provide the necessary energy, fluids, and/or gases to drive Triton's geyser‐like plumes; (5) The atmospheric collapse predicted to occur on Triton in the next 20 years (Spencer, 1990) may be plausibly avoided because of the large latitudinal extent expected for permanent polar caps on Triton.

Journal of Geophysical Research E: Planets↗

USGS2019

Drought in the U.S. Caribbean: Impacts to freshwater ecosystems

Healthy and functioning freshwater ecosystems are needed for successful conservation and management of native fish and invertebrate species, and the services they provide to human communities, across the U.S. Caribbean. Yet streams, rivers, and reservoirs are vulnerable to the effects of extreme weather events, urbanization, energy and water development, and other environmental and human-caused disturbances (Neal et al., 2009). One major management concern is the impact of prolonged drought on freshwater ecosystems. Drought impacts streamflow, dissolved oxygen content, water quality, stream connectivity, available habitat, and other important freshwater habitat characteristics necessary for sustaining fish and invertebrate populations (Covich et al., 2006). These changes can impact species interactions, abundance, life history events, and the presence of native and non-native species (Larsen, 2000; Covich et al., 2006; Ramírez et al., 2018). Drought impacts aquatic ecosystems and species both in the short-term and long-term, depending on the severity and duration of the event (e.g. Covich et al., 2006 ). In Puerto Rico, all native freshwater fish, shrimp, and snail species spend part of their lives in estuarine and marine ecosystems and depend on being able to move between these habitats to survive, so maintaining connectivity is key (e.g., Engman et al., 2017 ). Freshwater ecosystems also provide recreational, cultural, and ecological value to humans ( Kwak et al., 2007 ; Neal et al., 2009 ). For example, some communities in Puerto Rico engage in artisanal shrimp and freshwater crab fishing ( Neal et al., 2009 ). Artisanal fishing for postlarvae gobioids, known colloquially as “cetí” also occurs at the river mouths of large drainages and has strong cultural significance in parts of Puerto Rico, such as Arecibo (Kwak et al., 2016). The U.S. Virgin Islands (USVI) is particularly sensitive to drought, because almost all streams are ephemeral and typically only flow after rainfall. These intermittent channels, known locally as “ghuts”, run down the surface of steep slopes, rather than through the ground, and are important sources of freshwater. Natural springs are often located in ghuts and can form pools of freshwater that serve as habitat for wetland and migratory birds, freshwater shrimp and fish, and amphibians ( Nemeth and Platenburg, 2007 ; Gardner, 2008 ).

Puerto Rico, U.S. Virgin Islands↗

USGS2015

Shift in Global Tantalum Mine Production, 2000–2014

Introduction Tantalum has a unique set of properties that make it useful in a number of diverse applications. The ability of the metal to store and release electrical energy makes it ideally suited for use in certain types of capacitors that are widely used in modern electronics. Approximately 60 percent of global tantalum consumption is in the electronics industry. The ductility and corrosion resistance of the metal lends itself to application in the chemical processing industry, and its high melting point and high strength retention at elevated temperatures make it an important component of super alloys used in aircraft engines. As a major industrialized nation, the United States is a leading consumer of tantalum and tantalum-containing products. Domestic deposits typically are of low grade, and no tantalum has been recovered from mining activities in the United States since 1959. Consequently, the United States is nearly completely reliant on imports to meet its domestic consumption of tantalum for economic and national security needs. The recovery of tantalum from mine production is economically viable in only a few countries. Although developed countries dominated tantalum mine production in the early 2000s, production today is dominated by countries in the Great Lakes Region of Africa. There is concern that the sales of minerals, including columbite-tantalite or “coltan,” a mineral from which tantalum is derived, have helped finance rebel groups accused of violating human rights as part of the continuing armed conflict in the Democratic Republic of the Congo (DRC) and neighboring countries. These accusations have prompted the passage of legislation in the United States to curb the procurement of these mineral commodities, referred to as “conflict minerals,” from the DRC. Specifically, section 1502 of the 2010 Dodd-Frank Wall Street Reform and Consumer Protection Act (Public Law 111–203, 124 Stat. 2213–2218) requires companies that source tantalum, tin, tungsten, and gold (3TG) to perform due diligence on their supply chains to determine if the materials they use originate from the DRC or adjoining countries (defined as sharing a border with the DRC). The DRC, Rwanda, and surrounding countries are not globally significant sources of tin, tungsten, or gold, accounting for only about 2 percent of the mined world supply for each of these elements. The region has, however, evolved to become the world’s largest producer of mined tantalum. A further complication of the production of tantalum stems from the opacity of the tantalum market. Unlike most base and precious metals, tantalum concentrates are not publicly traded through commodities exchanges but are bought and sold through networks of dealers and on contract between producers and consumers, some of whom may not provide accurate statistical data concerning the amounts, origins, and destination of the concentrates. Some price data can be found in trade journals or in other publications; however, there are no recognized official set exchange prices for either concentrate or tantalum metal. Because price is determined by negotiation between buyer and seller, published prices for concentrate are probably not representative of global prices paid for concentrate. The development of a mine-to-market supply-chain analysis is complicated and difficult because many of the industry participants that produce, trade, and consume tantalum do not publish statistical information, contracts are long term between miners and buyers, and much of the industry is vertically integrated. As a result of these and other considerations, tantalum is considered by many to be a “critical” commodity. This fact sheet identifies and addresses the major geographic shifts in the source of mine production of tantalum which have occurred over the past 15 years, some of the factors that drove this shift, and some of the related consequences. One of the activities of the U.S. Geological Survey National Minerals Information Center (USGS-NMIC) is to analyze global supply chains and characterize major components of mineral and material flows from ore extraction through processing to first tier products. These analyses support the core mission of the USGS-NMIC as the Federal entity responsible for the collection, analysis, and dissemination of objective, unbiased, factual information on minerals essential to the U.S. economy and national security.

Fact Sheet↗

USGS1976

Geothermal handbook

The Bureau of Land Management offered over 400,000 hectares (one million acres) for geothermal exploration and development in 1975, and figure is expected to double this year. The Energy Research and Development Administration hopes for 10-15,000 megawatts of geothermal energy by 1985, which would require, leasing over 16.3 million hectares (37 million acres) of land, at least half of which is federal land. Since there is an 8 to 8-1/2 year time laf between initial exploration and full field development, there would have to be a ten-fold increase in the amount of federal land leased within the next three years. Seventy percent of geothermal potential, 22.3 million hectares (55 million acres), is on federal lands in the west. The implication for the Service are enormous and the problems immediate. Geothermal resource are so widespread they are found to some extent in most biomes and ecosystems in the western United States. In most cases exploitation and production of geothermal resources can be made compatible with fish and wildlife management without damage, if probable impacts are clearly understood and provided for before damage has unwittingly been allowed to occur. Planning for site suitability and concern with specific operating techniques are crucial factors. There will be opportunities for enhancement: during exploration and testing many shallow groundwater bodies may be penetrated which might be developed for wildlife use. Construction equipment and materials needed for enhancement projects will be available in areas heretofore considered remote projects will be available in areas heretofore considered remote by land managers. A comprehensive knowledge of geothermal development is necessary to avoid dangers and seize opportunities. This handbook is intended to serve as a working tool in the field. It anticipated where geothermal resource development will occur in the western United States in the near future. A set of environmental assessment procedures are presented which will allow the Service to provide input to the federal leasing process. As an impact information source by which to judge the appropriateness of a specific activity at a specific site, a discussion of activities-impacts is provided on a phase by phase basis. Mitigation and possible enhancement techniques are also presented so that the impacts of the development can be dealt with and the fish and wildlife situation improved. The Service can achieve its objective only if biological input is made throughout the entire process of geothermal development, from exploration to testing to full field operation. A discussion of geothermal leasing procedures emphasizes the timing and nature of Service participation in current interagency lease processing, and there is a provision for the utilization of new knowledge, techniques, and responses as experience is accumulated.

FWS/OBS↗

USGS2015

Hydrogeology of the Owego-Apalachin Elementary School geothermal fields, Tioga County, New York

The hydrogeology of the Owego-Apalachin Elementary School geothermal fields, which penetrate saline water and methane in fractured upper Devonian age bedrock in the Owego Creek valley, south-central New York, was characterized through the analysis of drilling and geophysical logs, water-level monitoring data, and specific-depth water samples. Hydrogeologic insights gained during the study proved beneficial for the design of the geothermal drilling program and protection of the overlying aquifer during construction, and may be useful for the development of future geothermal fields and other energy-related activities, such as drilling for oil and natural gas in similar fractured-bedrock settings. The southwest geothermal field consists of 204 closed-loop wells that penetrate a major saline water-bearing zone associated with bedding-plane fractures near the middle of an interbedded sandstone and shale interval at depths of 238 to 263 feet below land surface (ft bls). The northeast geothermal field consists of 80 closed-loop wells that penetrate a major saline water-bearing zone associated with bedding-plane fractures near the base of the interbedded sandstone and shale interval at depths of 303 to 323 ft bls. Transmissivity estimates for the major saline water-bearing fractured zones range from 735 to 3,400 feet squared per day. The saline water-bearing zone in the southwest field is hydraulically connected over a horizontal distance of at least 350 feet. The hydraulic connection between subhorizontal, stacked bedding-plane fractures is limited by the number and transmissivity of interspersed higher angle fractures; locally, greater stratigraphic separation results in reduced connectivity to a greater degree than does horizontal distance. The specific conductance of the saline water from the shallower fractured zone in the southwest field was about 16,000 microsiemens per centimeter at 25 degrees Celsius (μS/cm at 25°C), and that from the fractured zone in the northeast field was about 65,000 μS/cm at 25°C. The saline waters were characterized by a chemical composition similar to that of deep formation brines collected from oil and gas wells in the Appalachian Basin. About 40 percent of the geothermal wells discharged methane gas to land surface during and (or) following drilling. Sandstone beds at depths of 348 to 378 ft bls are the likely source of the methane gas, which was determined to be early thermogenic in origin.

New York↗

USGS2003

Petroleum system and production characteristics of the Muddy (J) Sandstone (Lower Cretaceous) Wattenberg continuous gas field, Denver basin, Colorado

Wattenberg field is a continuous-type gas accumulation. Estimated ultimate recovery from current wells is 1.27 tcf of gas from the Lower Cretaceous Muddy (J) Sandstone. Mean gas resources that have the potential to be added to these reserves in the next 30 yr are 1.09 tcf; this will be primarily through infill drilling to recover a greater percentage of gas in place and to drain areas that are isolated because of geologic compartmentalization. Greatest gas production from the Muddy (J) Sandstone in Wattenberg field occurs (1) from within the most permeable and thickest intervals of Fort Collins Member delta-front and nearshore-marine sandstones, (2) to a lesser extent from the Horsetooth Member valley-fill channel sandstones, (3) in association with a large thermal anomaly that is delineated by measured temperatures in wells and by vitrinite reflectance contours of 0.9% and greater, (4) in proximity to the bounding Mowry, Graneros, and Skull Creek shales that are the hydrocarbon source rocks and reservoir seals, and (5) between the Lafayette and Longmont right-lateral wrench fault zones (WFZs) with secondary faults that act as conduits in areas of the field. The axis of greatest gas production is north 25 to 35 degrees northeast, which parallels the basin axis. Recurrent movement along five right-lateral WFZs that crosscut Wattenberg field shifted the Denver basin axis to the northeast and influenced depositional and erosional patterns of the reservoir and seal intervals. Levels of thermal maturity within the Wattenberg field are anomalously high compared to other areas of the Denver basin. The Wattenberg field thermal anomaly may be due to upward movement of fluids along faults associated with probable igneous intrusions. Areas of anomalous high heat flow within the field correlate with an increased and variable gas-oil ratio. Debra Higley has 5 years experience in uranium exploration and 20 years as a petroleum geologist with the U.S. Geological Survey. Her research interests include and integrate reservoir characterization, thermal maturation studies, and petroleum resource assessment in basins in North and South America. She received a B.S. degree in geology from Mesa State College (Colorado) and an M.S. degree in geochemistry and Ph.D. in geology from the Colorado School of Mines.Dave Cox is vice president of Reservoir Engineering for Questa Engineering in Golden, Colorado. He has 25 years experience in the oil and gas industry, primarily in reservoir engineering and property evaluations, and has analyzed reservoirs in 31 states of the United States and 19 other countries. He is an expert in coalbed methane, tight gas reservoirs, and enhanced oil recovery. He has B.S. and M.S. degrees in petroleum engineering from the Colorado School of Mines. Robert Weimer has taught courses in stratigraphy, regional and field geology, and energy resource exploration and development for 43 years. He earned B.A. and M.A. degrees from the University of Wyoming and his Ph.D. from Stanford University. He has been a visiting professor at universities in Calgary, Canada; Adelaide, Australia; and Bandung, Indonesia. He is currently professor emeritus, Colorado School of Mines. Weimer has been honored for teaching excellence, blending basic and applied research, national and international continuing education, and service to scientific societies and to state and national boards.

Colorado↗

USGS2010

The principal rare earth elements deposits of the United States: A summary of domestic deposits and a global perspective

The rare earth elements (REE) are fifteen elements with atomic numbers 57 through 71, from lanthanum to lutetium ('lanthanides'), plus yttrium (39), which is chemically similar to the lanthanide elements and thus typically included with the rare earth elements. Although industrial demand for these elements is relatively small in tonnage terms, they are essential for a diverse and expanding array of high-technology applications. REE-containing magnets, metal alloys for batteries and light-weight structures, and phosphors are essential for many current and emerging alternative energy technologies, such as electric vehicles, energy-efficient lighting, and wind power. REE are also critical for a number of key defense systems and other advanced materials. Section 843 of the National Defense Authorization Act for Fiscal Year 2010, Public Law 111-84, directs the Comptroller General to complete a report on REE materials in the defense supply chain. The Office of Industrial Policy, in collaboration with other U.S. Government agencies, has initiated (in addition to this report) a detailed study of REE. This latter study will assess the Department of Defense's use of REE, as well as the status and security of domestic and global supply chains. That study will also address vulnerabilities in the supply chain and recommend ways to mitigate any potential risks of supply disruption. To help conduct this study, the Office of Industrial Policy asked the U.S. Geological Survey (USGS) to report on domestic REE reserves and resources in a global context. To this end, the enclosed report is the initial USGS contribution to assessing and summarizing the domestic REE resources in a global perspective. In 2009, the Mineral Resources Program of the USGS organized a new project under the title Minerals at Risk and For Emerging Technologies in order to evaluate mineral resource and supply issues of rare metals that are of increasing importance to the national economy. Leaders and members of this project, with the assistance of the USGS National Minerals Information Center, prepared the enclosed USGS report on domestic REE resources. The USGS Mineral Resources Program has investigated domestic and selected foreign REE resources for many decades, and this report summarizes what has been learned from this research. The USGS National Minerals Information Center (formerly Minerals Information Team) has monitored global production, trade, and resources for an equally long period and is the principal source of statistics used in this report. The objective of this study is to provide a nontechnical overview of domestic reserves and resources of REE and possibilities for utilizing those resources. At the present time, the United States obtains its REE raw materials from foreign sources, almost exclusively from China. Import dependence upon a single country raises serious issues of supply security. In a global context, domestic REE resources are modest and of uncertain value; hence, available resources in traditional trading partners (such as Canada and Australia) are of great interest for diversifying sources of supply. This report restates basic geologic facts about REE relevant to assessing security of supply, followed by a review of current United States consumption and imports of REE, current knowledge of domestic resources, and possibilities for future domestic production. Further detail follows in a deposit-by-deposit review of the most significant domestic REE deposits (see index map). Necessary steps to develop domestic resources are discussed in a separate section, leading into a review of current domestic exploration and a discussion of the value of a future national mineral resource assessment of REE. The report also includes an overview of known global REE resources and discusses the reliability of alternative foreign sources of REE.

Scientific Investigations Report↗

USGS2001

Seismic hazard in Hawaii: High rate of large earthquakes and probabilistics ground-motion maps

The seismic hazard and earthquake occurrence rates in Hawaii are locally as high as that near the most hazardous faults elsewhere in the United States. We have generated maps of peak ground acceleration (PGA) and spectral acceleration (SA) (at 0.2, 0.3 and 1.0 sec, 5% critical damping) at 2% and 10% exceedance probabilities in 50 years. The highest hazard is on the south side of Hawaii Island, as indicated by the MI 7.0, MS 7.2, and MI 7.9 earthquakes, which occurred there since 1868. Probabilistic values of horizontal PGA (2% in 50 years) on Hawaii's south coast exceed 1.75g. Because some large earthquake aftershock zones and the geometry of flank blocks slipping on subhorizontal decollement faults are known, we use a combination of spatially uniform sources in active flank blocks and smoothed seismicity in other areas to model seismicity. Rates of earthquakes are derived from magnitude distributions of the modem (1959-1997) catalog of the Hawaiian Volcano Observatory's seismic network supplemented by the historic (1868-1959) catalog. Modern magnitudes are ML measured on a Wood-Anderson seismograph or MS. Historic magnitudes may add ML measured on a Milne-Shaw or Bosch-Omori seismograph or MI derived from calibrated areas of MM intensities. Active flank areas, which by far account for the highest hazard, are characterized by distributions with b slopes of about 1.0 below M 5.0 and about 0.6 above M 5.0. The kinked distribution means that large earthquake rates would be grossly under-estimated by extrapolating small earthquake rates, and that longer catalogs are essential for estimating or verifying the rates of large earthquakes. Flank earthquakes thus follow a semicharacteristic model, which is a combination of background seismicity and an excess number of large earthquakes. Flank earthquakes are geometrically confined to rupture zones on the volcano flanks by barriers such as rift zones and the seaward edge of the volcano, which may be expressed by a magnitude distribution similar to that including characteristic earthquakes. The island chain northwest of Hawaii Island is seismically and volcanically much less active. We model its seismic hazard with a combination of a linearly decaying ramp fit to the cataloged seismicity and spatially smoothed seismicity with a smoothing half-width of 10 km. We use a combination of up to four attenuation relations for each map because for either PGA or SA, there is no single relation that represents ground motion for all distance and magnitude ranges. Great slumps and landslides visible on the ocean floor correspond to catastrophes with effective energy magnitudes ME above 8.0. A crude estimate of their frequency suggests that the probabilistic earthquake hazard is at least an order of magnitude higher for flank earthquakes than that from submarine slumps.

Bulletin of the Seismological Society of America↗