USGS Science⌕ Search

SEARCH · USGS Science

Results for “Deep Sea Research Part II: Topical Studies in Oceanography”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,615 records · Page 57Linked to original sources
USGS2026

Numerical modeling of Late Pleistocene to Holocene earthquake-induced progressive rock slope damage in the paraglacial Serpentine valley, Prince William Sound, Alaska

Landslides in deglaciating fjords pose a potential tsunami threat to nearby communities; however, processes contributing to long-term progressive rock damage and landslide conditioning remain poorly constrained in paraglacial settings. Here, we analyse the role of earthquake-induced rock mass damage over late Pleistocene to Holocene time scales, as a conditioning factor for modern landslides, using distinct element numerical modelling to assess spatial and temporal patterns of fracture propagation influenced by varying glacier thickness. Conceptualised numerical models were parameterised by in situ rock mass, glacial and topographic conditions in Serpentine valley, located in Prince William Sound, Alaska, where several large landslides are actively developing along the western valley wall. Results show that although rigid glacier buttressing reduces co-seismic rock mass damage, it does not suppress it completely, and damage occurs both above and below the glacier surface elevation. We demonstrate that topography, and especially steep slopes with topographic convexity, as well as preexisting damage of joint networks and faults inherited from tectonic and exhumation induced stresses, exert primary control on the location of new co-seismic damage. Simulations representing a simplified deglaciation sequence over the past 25 ka, with a series of 10 evenly spaced earthquakes, generated rock mass damage patterns that qualitatively match in situ landslide structural and kinematic observations at one instability in Serpentine valley. Our conceptual study helps clarify the role of repeated seismicity over glacial timescales as a long-term conditioning process for paraglacial rock slope failure, highlighting spatial and temporal patterns of progressive damage accumulation, with outcomes relevant for modern landslide hazard assessment.

Alaska↗
USGS2025

Waning greenhouse gas emissions from U.S. Federal lease coal production by the mid-21st century

This study presents estimates of future years (2024–2051) United States Federal lease coal production and the resulting greenhouse gas (GHG) emissions from the combustion, transport, and mining of that fuel. Results from the coal production estimate indicate a decline in production from Federal leases; with known production of 240 million short tons (mtn) in 2023 and a projected decline to 34.0 mtn by 2051, which represents a reduction to 14.2% of the 2023 value. In parallel with this projection, total GHG emissions are estimated to decrease from 402.2 million metric tons of carbon dioxide equivalent (MMT CO 2 eq.) in 2024 to 55.0 MMT CO 2 eq. in 2051, a decline to 13.7% of 2024 emissions estimates. The reductions in coal production and emissions are mainly the result of planned coal combustion power plant closures, with major projected closures in 2037 and 2048. However, GHG emissions estimates for future years can be uncertain as they rely heavily on coal production estimates from operators' public business plans and other publicly available resources. Forward looking plans of this type are subject to significant changes if economic and political factors deviate from current information. Results suggest that average GHG emissions over the time series breakout to 95% end point combustion, 3.7% transportation combustion emissions, and 1.3% fugitive emissions, although there is uncertainty associated with these figures. Uncertainty stemming from production projections, sector distributions, and emissions factors on the future emissions estimates increases with time, ranging from −28% to +48% within the 2024–2051 timeframe.

Alabama, Colorado, Montana, North Dakota, Utah, Wy↗
USGS2025

Statewide cumulative human health risk assessment of inorganics-contaminated groundwater wells, Montana, USA

Across the United States, rural residents rely on unregulated and generally unmonitored private wells for drinking water, which may pose serious health risks due to unrecognized contaminants. We assessed the nature, degree, and spatial distribution of cumulative health risks from inorganic contaminants in groundwater. Our analysis included nearly 84,000 data points from 6500+ wells, across 51 of Montana's 98 watersheds, using a public groundwater database. We compared a drinking water screening level cumulative risk assessment (CRA) for inorganics based on the U.S. Environmental Protection Agency (EPA) protective health thresholds (Maximum Contaminant Level Goals, Health Advisories [MCLG-HAs]) to a CRA based on EPA public supply enforceable Maximum Contaminant Levels (MCLs). Based on median concentrations of 19 inorganics (antimony, arsenic, barium, beryllium, boron, cadmium, chromium, copper, fluoride, manganese, molybdenum, nickel, nitrate, lead, selenium, strontium, thallium, uranium, zinc), 75% of watersheds had MCLG-HA-based cumulative risk values > 1.0; arsenic and uranium contributed the most risk, followed by strontium, fluoride, manganese and boron. Hence, this screening level (Tier I) CRA indicated widespread potential for unrecognized human health risk to private well users from inorganic contaminants considering both carcinogenic and non-carcinogenic risks. Sensitivity analysis showed that benchmarks applied (MCLG-HAs versus MCLs) exerted the largest control on results. Our findings identify priority regions for Tier 2 risk assessments to elucidate local sources and distributions of geogenic versus anthropomorphic contaminants. Our study is the first statewide assessment of cumulative health risk from groundwater that we are aware of, and results support increased statewide drinking water education and testing to reduce human health risks from contaminated private well water.

Montana↗
USGS2025

Projecting stream water quality using Weighted Regression on Time, Discharge, and Season (WRTDS): An example with drought conditions in the Delaware River Basin

Future water availability depends on understanding the responses of constituent concentrations to hydrologic change. Projecting future water quality remains a methodological challenge, particularly when using discrete observations with limited temporal resolution. This study introduces Weighted Regression on Time, Discharge, and Season for Projection (WRTDS-P), a novel, computationally efficient method that enables the projection of daily stream water quality under varying hydrologic conditions using commonly available discrete monitoring data. WRTDS-P model performance was validated using 39 sites in the Delaware River Basin (DRB) and four key constituents: specific conductance (SC), nitrate (NO 3 − ), magnesium (Mg 2+ ) and calcium (Ca 2+ ). Projections were tested against holdout data from the final 1 to 5 years of each time series, demonstrating robust predictive capability, with median Nash-Sutcliffe efficiencies of 0.67 for SC, 0.56 for NO 3 − , 0.65 for Ca 2+ , and 0.79 for Mg 2+ . Model uncertainty was correlated with indicators of hydrologic or geochemical mass-sinks, such as groundwater storage and adsorption in wetland soils. Drought scenario analyses for SC used ranges of reduced discharge including flows from the 1965 drought of record. Scenarios predicted widespread increases of SC, especially in southern DRB streams where baseline SC levels are already elevated. Fractional increases of SC were more uniformly distributed, indicating potential risk to sensitive ecosystems. Notably, drought-induced SC increases were positively correlated with interannual SC trends, indicating that hydrologic extremes could exacerbate ongoing salinization. This work provides a transferable and interpretable framework for projecting future water quality and assessing hydrologic risk to water resources and aquatic ecosystems.

Delaware, New Jersey, New York, Pennsylvania↗
USGS2026

Geochemical, mineralogical, and isotopic evidence for multi-stage genesis of the Hicks Dome REE + Y-HFSE-fluorite deposit, Illinois, USA

Hicks Dome hosts breccias enriched in rare earth elements (REE), Y, Th, F, Ba, Ti, Nb, and Be, alongside spatially associated lamprophyre dikes (ca. 271 Ma). Hicks Dome is located within the Illinois–Kentucky Fluorspar District, which hosts fluorite, Pb–Zn, and barite resources. This study investigates the genetic relationships between Hicks Dome mineralization in breccias, alkaline magmatism, and Illinois–Kentucky Fluorspar District mineralization. Lamprophyre dikes are light REE–enriched with chondrite-normalized abundances decreasing from La to Lu. The Host Breccia exhibits middle and heavy REE–enriched patterns that mirror those of the principal REE–Th host minerals, including fluorapatite, xenotime, and thorite. Textural evidence suggests recrystallization of phosphates, sulfates, and Ti–Nb oxides in the Host Breccia. U–Pb geochronology constrains multiple mineralizing events, with ages of 277 ± 18 Ma from low-Th apatite interpreted as main-stage mineralization, and 121.6 ± 9.7 Ma from high-Th apatite indicating later overprinting. O–H–C stable isotope data provide evidence for multiple stages of fluid-rock interaction and fluid mixing: (1) early magmatic fluids dissolved limestone country rock, (2) mixing between magmatic fluids and basinal brines led to main-stage mineralization in the Host Breccia, and (3) late-stage mineralization occurred following mixing of meteoric water and basinal brine. These results indicate that heavy REEs, high field strength elements, and fluorine precipitated proximal to its alkaline magmatic source because of fluid–rock interactions and fluid mixing. Subsequent fluid mixing drove late-stage recrystallization and additional fluorite formation, a process that may be similar to mineralization in the Illinois-Kentucky Fluorspar District.

Illinois↗
USGS2025

Exploring the science and data foundation for Federal public lands decisions

Public lands provide diverse resources, values, and services worldwide. Laws and policies typically require consideration of science in public lands decisions, and resource managers are committed to science-informed decision-making. However, it can be challenging for managers to use, and document the use of, science and data in their decisions. To better understand science and data use in Federal public lands decisions in the United States, we assessed the number, type, and age of documents cited in 70 Environmental Assessments (EAs) completed by the Bureau of Land Management (BLM) in Colorado from 2015–2019. We focused on the BLM, as they manage the largest area of public lands in the United States. We selected Colorado as our study area, as actions proposed on BLM lands in Colorado are representative of those across the nation. Fifty percent of citations were categorized as science and 23% as data. EAs contained an average of 17 citations (range 0–111), with documents analyzing effects of oil and gas development and recreation actions including the highest and lowest mean number of citations (41 and 6, respectively). Of individual resource analysis sections within EAs, 24% contained ≥1 science citation and 21% contained ≥1 data citation. Journal articles were the most cited type of document (26% of citations) followed by non-BLM inventories (13%). Forty-seven percent of citations were relatively recent (2010 or later); the oldest citation was from 1927. Commonly analyzed resources with the highest mean number of citations were socioeconomics, mineral resources, and noise. Fourteen of 33 commonly analyzed resources included <1 citation on average. Actions and resources with no or few citations represent opportunities for strengthening the transparent use of science and data in public lands decision-making.

Colorado↗
USGS2025

Evaluating the potential of co-located non-petroleum energy resources in the Gulf Coast using play fairwayaAnalysis

Geological resources critical to the energy transition, such as sedimentary geothermal, carbon storage potential, and lithium in brines, commonly struggle for economic feasibility as stand-alone developments but can have greater viability when the potential for more than one of these resources exist within the same reservoir or stacked in different stratigraphic intervals. There may also be instances where development of one resource inhibits development of others and decisions need to be made on how to best prioritize the use of those resources in the subsurface. Subsurface data sets were analyzed and integrated to evaluate the distribution of non-petroleum energy and related resources in the onshore and nearshore U.S. Gulf Coast. Temperature, pressure, brine composition (lithium content), and reservoir quality data for thirty-four depositional units have been compiled and visualized to high-grade areas where multiple resource opportunities likely coexist. For sedimentary geothermal, possible resource areas are defined as low potential (<90°C), moderate potential (90–150°C), and high potential (>150°C). For CO 2 storage, high potential areas exhibit supercritical CO 2 conditions less than 80% of the fracture gradient. Areas with pore pressure between 80% and 100% of the fracture gradient are considered to exhibit moderate potential and areas where the fracture gradient is equal to or greater than 100% are assigned low potential. Lithium resources in brines were defined by lithium concentrations as low potential (<100ppm), moderate potential (100-200ppm), or high potential (>200ppm). Reservoir quality affects the viability of all three of these resources and is evaluated using depositional environment maps of each unit. The resulting play fairway maps can be used for regional scale screening evaluations of these resources and to identify areas of interest where more detailed, prospect-scale studies can be undertaken.

Gulf Coast↗
USGS2026

Non-destructive sampling of larval amphibians shows tail tissues reflect whole-body methylmercury concentrations and trophic-related differences in bioaccumulation

Mercury (Hg), and specifically methylmercury (MeHg), is a contaminant of global concern to humans and wildlife, but there is still limited understanding of its effects on many taxa. Amphibians are closely associated with water, where Hg is converted to MeHg, and high concentrations of MeHg can reduce survival of amphibians in the wild. However, limited non-lethal proxies exist for estimating MeHg bioaccumulation in amphibian larvae, which could be used to reduce destructive sampling and allow sampling of imperiled species. We evaluated whether tail clips were indicative of whole-body MeHg concentrations of larval amphibians, whether dragonflies were an effective bioindicator of Hg concentrations of larval amphibians, and compared MeHg bioaccumulation in predatory caudate (salamanders, newts) and non-predatory anuran (frogs, toads) larvae. Tail-clip and whole-body MeHg concentrations were strongly correlated, especially for caudates. There was high variability among sites and species, but caudates had higher MeHg than anurans, and MeHg concentrations of caudates and anurans were strongly correlated. Dragonflies were a weak indicator of MeHg for anurans but strong indicators for larval caudates, likely because caudates and dragonflies are carnivorous and occupy similar trophic positions. Our study revealed that sampling tails can be an effective non-destructive index of whole-body MeHg for larval amphibians and demonstrates differences in MeHg bioaccumulation related to trophic position in larval amphibians and dragonflies. All post-embryo life stages for a broad suite of amphibian species can now be sampled non-lethally for MeHg, allowing for a broader examination of population-level effects and focus on imperiled species that cannot be sampled destructively.

conterminous United States↗
USGS2026

Influence of new residential construction varying in housing density on bird species, human tolerance guilds, and communities

Human population growth and changing settlement patterns fuel the development of urban fringe lands worldwide, with implications for biodiversity. We conducted a 12-year study of birds in the fast-developing urban fringe lands of the central Puget Sound region, Washington, USA, to examine the effect of development configuration on birds. We hypothesized that lower-intensity conservation developments, compared to higher-intensity planned community developments, would benefit the overall bird community, as well as native forest birds (avoiders of human development) and avian generalist species (adapters to human development), but that higher-intensity planned community developments would benefit synanthropic species (exploiters of human development). We fit single-species and multi-species occupancy models to test these hypotheses. Consistent with our hypotheses, we found that a greater proportion of the overall community, avoiders, and adapters occupied lower-intensity conservation developments compared to higher-intensity planned community developments. However, we did not detect an effect of development type on the exploiter guild, and we found that species in the exploiter guild are variable in their response to the configuration of suburban developments. We also hypothesized that human tolerance guilds would be a useful predictor of individual species responses to development type. This hypothesis was somewhat supported: we found that, for avoiders, 87% of species in the guild had the same response to development type as the overall guild; for adapters, 63% had the same response as the overall guild, and for exploiters, only 44% had the same response as the overall guild. Our results indicate that the configuration of suburban developments can have a meaningful impact on bird communities, particularly on those species that are most sensitive to any level of development.

Washington↗
USGS1983

Base flow and ground water in upper Sweetwater Valley, Tennessee

The upper Sweetwater Valley area has a flow system with complex interaction between surface and ground water. A water budget study indicated that during dry years approximately three-fourths of the annual flow to Sweetwater Creek may be derived from ground-water sources. Hydrograph analysis showed seasonal variation of recharge to the ground-water flow system. Streamflow records were analyzed to estimate the frequency of low flow of Sweetwater Creek at river mile 16.7, and indicated the lowest average flow for 1 day in 20 years to be about 5.1 cubic feet per second. Two periods of base-flow measurements of Sweetwater Creek identified channel reaches with significant gains and losses of streamflow. Base flow measurements also showed interbasin transfer of water among sub-basins of the valley. Major flow surpluses were associated with areas in which the majority of flow originated at a spring. Topographically low areas adjacent to the main stem of Sweetwater Creek generally have surplus flow. Topographically higher areas generally have deficient surface outflow unless significant spring flow occurs in the basin. Ground-water recharge occurs by water draining into sinkholes, faults, and fractures. Ground-water flow is regionally diffused across formation strikes from the topographically low areas unless the water is exposed to highly permeable formations or impervious formations. Ground water infiltrates the highly permeable formations and flows along strike. Ground water encountering impervious formations may discharge at small springs at the contact, or may reroute along the contact if the upgradient rock is sufficiently permeable or has well developed secondary porosity. Groundwater discharges to streams at innumerable seeps and at a few large springs. Areas of ground-water flow up-gradient of large springs are hypothesized as likely areas of significant ground-water reservoirs.

Tennessee↗
USGS2026

Global pegmatite-hosted lithium, cesium, and rubidium resources: A dataset for grade and tonnage modeling

Quantitative mineral resource assessments of potential undiscovered deposits can inform future mineral supply scenarios, but their accuracy is conditional on building robust grade and tonnage models of known deposits. This study presents an up-to-date global compilation and analysis of recently discovered and original, in-situ pegmatite-hosted Li, Cs, and Rb resources prior to historic production. Our analysis yields a median tonnage of 21.2 million tons (Mt) and grade of 1.12% Li 2 O, respectively, for global Li pegmatite deposits ( n = 73). The grades and tonnages of Li pegmatite resources vary depending on the age of the bedrock host domain, pegmatite crystallization age, and primary ore mineralogy. Lithium pegmatite resources hosted in Archean to transitional Archean-Paleoproterozoic domains have the largest median tonnage (29.8 Mt; n = 38), and those hosted in Paleoproterozoic to Mesoproterozoic domains have smaller median tonnages (6.5 Mt; n = 16). Cesium deposits where pollucite is the primary ore mineral have a bimodal grade distribution, with modes of 2.40 and 0.035 wt% Cs 2 O for high- and low-grade deposits, respectively, while Rb deposits are more unimodal with a median grade of 0.247 wt% Rb 2 O. Pegmatite-hosted Cs and Rb resources have median tonnages of 7.6 and 6.3 Mt, respectively. Covariation between ore mineralogy and the degree of crustal enrichment in pegmatite-hosted deposits is diagnostic of petrogenetic differences, including melt source characteristics, magma evolution, or variable degrees of volatile solubility. The Li pegmatite compilation is suitable for fitting robust numerical models to support quantitative assessments. More well-defined Rb and Cs pegmatite resources are required for quantitative assessments, but these data provide useful information about original in-place resources for framing supply discussions.

Ore Geology Reviews↗
USGS2025

Assessing legacy nitrogen in groundwater using numerical models of the Long Island aquifer system, New York

Nitrogen transported along groundwater flow paths in coastal aquifers can contribute substantially to nitrogen loading into surface water receptors, particularly in hydrologic systems dominated by groundwater discharge. Nitrogen entrained in the aquifer is a function of land use and associated nitrogen sources at the time of groundwater recharge, which may differ considerably from present-day sources. Legacy nitrogen can result in substantial discrepancies between observed present-day nitrogen loading to surface water receptors and loading estimated from present-day sources. Additionally, legacy nitrogen can continue to discharge into surface waters after nitrogen mitigation actions have been undertaken. Here, we use a numerical modeling framework to compare three methods of estimating time-varying historical nitrogen loads to four water bodies (receptors) on eastern Long Island, New York. The methods span a range of data requirements and process complexity, from instantaneous receptor loads calculated from steady-state groundwater contributing areas, to transient loads estimated by explicitly simulating legacy groundwater nitrogen transport over a century with large changes in nitrogen sources and hydrologic conditions. The effects of legacy nitrogen on estimated receptor loads varied temporally and spatially within the study area. Depending on antecedent nitrogen inputs and hydrologic conditions, historical annual nitrogen loads estimated from transient simulations accounting for legacy nitrogen can be quite similar (<10% difference) or substantially different (±100%) from those estimated from simpler instantaneous methods. Continued input of present-day nitrogen sources using methods that account for legacy nitrogen results in asymptotic increases in receptor nitrogen loads over time, indicating that simulated present-day receptor nitrogen loads are not in equilibrium with present-day inputs. For these receptors in disequilibrium, models simulating transient groundwater nitrogen transport could be used to account for legacy nitrogen lag times to help resource managers evaluate the potential effectiveness of proposed nitrogen mitigation actions.

EarthArXiv↗
USGS2025

Dynamic baseflow storage estimates and the role of topography, geology and evapotranspiration on streamflow recession characteristics in the Neversink Reservoir Watershed, New York

Estimates of dynamic groundwater volumes supplying baseflow to streams are important for water availability projections during extended periods of drought. The primary goals of this study were to provide dynamic storage volume estimates, inferred from streamflow recession analysis, for baseflow regimes within seven gaged catchments within the Neversink Reservoir Watershed (NRW), a critical municipal water source for New York City. Additionally, geomorphological properties, surficial geology and hydro-meteorological processes were quantified and described in relation to time and spatially variable recession behaviour and storage estimates across the NRW. To explore these relationships, we (1) evaluated seasonal trends in streamflow recession behaviour in relation to modelled potential evapotranspiration (PET) and catchment runoff rates, (2) derived empirical streamflow models for cool-season runoff using both linear and nonlinear reservoir assumptions for baseflow and (3) calculated metrics related to the geology and geomorphology of each catchment and compared these metrics to area normalised baseflow dynamic storage estimates. Results show that baseflow recession behaves as a nonlinear reservoir, and applying linear groundwater reservoir assumptions may underestimate the total dynamic storage volumes compared to what would be predicted for a nonlinear reservoir. Increases in PET caused decreases in storage conditions that resulted in increased recession rates and nonlinearity in streamflow recession during the growing season. Additionally, we found that while no single physical catchment characteristic solely predicted catchment storage dynamics, sediment volume and stream gradients were stronger predictors of normalised storage volumes than catchment surface area or surface topography alone. Within the NRW, catchments with the highest sediment volume exhibited the lowest recession rates and higher dynamic storage volumes, while the smallest catchment, mostly devoid of sediment, had the fastest recession rate and lowest dynamic storage volume.

New York↗
USGS2026

Tracking baseflow supply dynamics using SWOT data from small groundwater-dominated lakes

In situ surface-water monitoring strategies are biased towards larger perennial streams and lakes and are generally not designed to track mechanisms of baseflow supply contributed by the dynamic storage of aquifers. Additionally, small (< 1 km 2 ) groundwater-influenced lakes and wetlands globally have little in situ monitoring infrastructure. We explored the utility of remotely sensed Surface Water Ocean Topography Satellite (SWOT) data, collected from 2023 onward, to characterise the seasonal and multi-year water-level trends of groundwater flow-through kettle lakes distributed across the permeable sediments of eastern Massachusetts, USA. This analysis indicated that water levels for kettle lakes with areas down to approximately 0.05 km 2 are resolvable in the study area. Our examination of 17 kettle lakes found that SWOT water-surface elevation data closely tracked groundwater levels in adjacent monitoring wells where available, including the timing of seasonal patterns (highest levels generally in late spring), although there was some variation between years and there was a substantial lag in the timing of high water levels for a lake located downgradient from a 30-m-thick vadose zone. Furthermore, SWOT-observed water-level increases in kettle lakes tracked with baseflow increases in two adjacent groundwater-dominated streams, as would be expected from increased hydraulic gradients. Unlike spectral remote sensing, SWOT data are generally not affected by cloud cover, resulting in a potential for groundwater-dominated lakes to be sentinels of dynamic storage patterns, including identification of baseflow drought lags, which are currently ill-defined hydrological processes. SWOT monitoring of groundwater-influenced surface waters shows potential for augmenting existing monitoring wells and streamgages as continuous monitors of groundwater levels and baseflow supply in permeable terrain.

Massachusetts↗
USGS2000

Regional evaluation of evapotranspiration in the Everglades

Nine sites in the Florida Everglades were selected and instrumented for collection of data necessary for evapotranspiration-determination using the Bowen-ratio energy-budget method. The sites were selected to represent the sawgrass or cattail marshes, wet prairie, and open-water areas that constitute most of the natural Everglades system. At each site, measurements necessary for evapotranspiration (ET) calculation and modeling were automatically made and stored on-site at 15- or 30-minute intervals. Data collected included air temperature and humidity at two heights, wind speed and direction, incoming solar radiation, net solar radiation, water level and temperature, soil moisture content, soil temperature, soil heat flux, and rainfall. Data summarized in this report were collected from January 1996 through December 1997, and the development of site-specific and regional models of ET for this period is described. Latent heat flux is the energy flux density equivalent of the ET rate. Modified Priestley-Taylor models of latent heat flux as a function of selected independent variables were developed at each site. These models were used to fill in periods of missing latent heat flux measurement, and to develop regional models of the entire Everglades region. The regional models may be used to estimate ET in wet prairie, sawgrass or cattail marsh, and open-water portions of the natural Everglades system. The models are not applicable to forested areas or to the brackish areas adjacent to Florida Bay. Two types of regional models were developed. One type of model uses measurements of available energy at a site, together with incoming solar energy and water depth, to estimate hourly ET. This available-energy model requires site data for net radiation, water heat storage, and soil heat flux, as well as data for incoming solar radiation and water depth. The other type of model requires only incoming solar energy, air temperature, and water depth data to provide estimates of hourly ET. The second model thus uses data that are more readily available than the data required for the available-energy model. Computed ET mean annual totals for all nine sites for the 1996-97 period ranged from 42.4 inches per year at a site where the water level is below land surface for several months each year to 57.4 inches per year at an open-water site with no emergent vegetation. Although the density of photosynthetically-active plant leaves has been shown to relate directly to ET in some studies, it does not appear to relate directly to ET in the Everglades, based on comparison of annual ET data with leaf-area index, defined as the Normalized Difference Vegetation Index (NDVI), data from satellite imagery. NDVI and ET appear to be inversely related in the Everglades. The greatest ET rates occurred at open-water sites where the NDVI data indicated the lowest leaf-area index. Among the remaining vegetated sites, there is no clear relation between ET and NDVI, though the highest ET rate corresponded to the lowest NDVI and one of the lowest ET rates corresponded to the highest NDVI value. The variation in ET follows a seasonal pattern, with lowest monthly ET totals occurring in December through February, and highest ET occurring in May through August. The greatest range in monthly ET among all nine sites for the 2-year period occurred at site 3: from 1.81 inches in December 1997 to 6.84 inches in July 1996. A study to compare the Bowen-ratio/energy balance method of ET measurement with the eddy-correlation method was done at one site from June 22, 1998, through September 28, 1998. This comparison indicated that both methods gave comparable values of the Bowen ratio, but there was a considerable difference in available energy measured by the two methods. The mean of all 30-minute measured turbulent heat fluxes from the eddy-correlation apparatus for June 22 through September 29, 1998, was 137.4 watts per square meter, and the mean of the corresponding measured energy was 163.6 watts per square meter, or about 20 percent greater. The disagreement in mean energy fluxes measured by the two methods is problematical and is not fully understood. Although the difference seems to be related to friction velocity, and is practically non-existent at values of friction velocity greater than 0.3 meter per second, the "correctness" of either method cannot be determined with the data available.

Florida↗
USGS2026

Seasonal and hydrologic variation influences habitat and functional structure of stream fish assemblages

Introduction: Hydrologic variability is a key driver of ecological structure in lotic systems, shaping habitat conditions, taxonomic diversity, and the functional traits that mediate species’ persistence and performance (e.g., reproductive success). While many studies examine taxonomic responses to variation in flows, few evaluate how spatiotemporal hydrologic variation influences the functional organization within stream fish communities. Methods: We quantified seasonal habitat structure and functional trait diversity of fish assemblages across six Ozark Plateau headwater streams representing two contrasting flow regimes: Groundwater Flashy and Runoff/Intermittent Flashy. Fish and habitat data were collected seasonally during a dry year (2002) and a wet year (2003). Functional space was constructed using PCoA of morphological, ecological, and life-history traits, and functional diversity was measured using community weighted means (CWMs), functional richness (FRic), functional evenness (FEve), and functional divergence (FDiv). Results: We found that habitat structure differed strongly by flow regime and season, with Runoff/Intermittent streams exhibiting pronounced reductions in depth, area, and velocity, while groundwater streams remained structurally stable. Functional identity of assemblages was similar across flow regimes, dominated by benthic, hydrodynamic taxa with opportunistic and periodic life-history strategies. However, functional structure differed significantly: FEve and FDiv were consistently lower in Runoff/Intermittent Flashy streams in both years, indicating assemblage dominance of species with similar trait combinations and reduced trait partitioning under variable flow. FRic and taxonomic richness remained stable across seasons and flow regimes, suggesting high functional redundancy despite species turnover. Discussion: Together, results show that flow regime mediates both habitat structural stability and functional organization. As climatic warming and extreme drought increase hydrologic instability in headwaters, functional trait approaches provide a sensitive tool for detecting losses of functional roles that may not be evident by using taxonomic metrics alone.

Arkansas, Kansas, Missouri, Oklahoma↗
USGS2026

Water use permits as of July 2024 and reported water use near the North Unit of Theodore Roosevelt National Park, North Dakota, 1980–2023

Starting in the early 2000s, increasing oil and gas development in western North Dakota created a need for additional water resources from surface-water and groundwater sources near the North Unit of Theodore Roosevelt National Park. To summarize the use of water in that area, the U.S. Geological Survey, in cooperation with the National Park Service, developed a map of surface-water and groundwater resources, aquifers, and water-use diversions, and plotted water-use trends from 1980 to 2023. Reported water used from permits in the map area has more than doubled since 2020, increasing from about 750 acre-feet in 2020 to about 2,300 acre-feet in 2022 and 2,000 acre-feet in 2023. Surface water provided the primary source of reported water used for the study period with an average of about 410 acre-feet per year from 1980 through 2017 and about 1,330 acre-feet per year from 2018 through 2023. After 2011, groundwater sourced from the Little Missouri River, Tobacco Garden Creek, Fox Hills, Fort Union, and Dakota aquifers became a larger portion of total annual reported water use from permits in the map area. From 1980 through 2015, water use for irrigation averaged 86 percent of the total annual reported surface-water and groundwater use in the map area. Starting in 2011, however, industrial uses became a proportionally larger total use of water, and in 2015, became the highest reported volume of water use in the map area. From 2011 to 2023, industrial use designated for water depots increased from 50 acre-feet to about 1,370 acre-feet, accounting for about 70 percent of total reported water use in the map area in 2023.

North Dakota↗
USGS2026

Abandonment of the Upper Devonian Greenland Gap Group and Scherr Formation and revision of the Upper Devonian Brallier and Foreknobs Formations in the central Valley and Ridge Province

This study revises the lithostratigraphic framework of the Upper Devonian interval traditionally assigned to the Greenland Gap Group across the central Appalachian Valley and Ridge Province. The work aims to modernize and standardize lithostratigraphic nomenclature, establish a new reference section and demonstrate how the revised stratigraphy improves edge-matching of 1:24,000 scale geologic maps and supports compilation mapping at scales of 1:100,000 and larger. The revision eliminates the names Greenland Gap Group, Scherr Formation and the Minnehaha Springs Member of the Scherr Formation; reassigns all strata previously designated as Scherr Formation by Dennison (1970) to the upper Brallier Formation; and abandons the basal Mallow Member of the Foreknobs Formation, placing its strata within the upper Brallier as originally defined by Butts (1918). The contact between the Brallier and Foreknobs formations is placed at the base of the first mappable, ridge-forming package of fine- to coarse-grained, cross-bedded, sandstone beds, often containing rounded quartz pebbles with minor interbeds of shale and siltstone. This contact may be gradational in places but, even in absence of good exposure, can usually be distinguished topographically in recently produced lidar-derived imagery as having elevated relief due to the presence of more resistant, compositionally mature coarse-grained sandstone-rich strata. Applying this criterion for mapping the contact between the Brallier and Foreknobs formations has resulted in reconciliation of mismatches of geologic contacts along several 7.5-minute quadrangle boundaries in the states of Virginia, West Virginia, Maryland and Pennsylvania. A new reference section at Baker, West Virginia showcases the contacts between the Harrell Shale, Brallier Formation, Foreknobs Formation and Hampshire Formation. A digital outcrop model of the reference section is provided for future preservation.

Maryland, Pennsylvania, Virginia, West Virginia↗