USGS Science⌕ Search

SEARCH · USGS Science

Results for “Critical Reviews in Environmental Science and Technology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,679 records · Page 57Linked to original sources
USGS2025

Relating systematic molecular and textural properties of graptolite pyrolyzed via gold tube hydrous pyrolysis: Implications for thermal proxies in lower Paleozoic marine shales

A series of gold tube pyrolysis experiments (72 h, 300–550 °C, 50 MPa) conducted on a graptolite-rich lower Paleozoic marine shale generated pyrolysis residues for a comprehensive evaluation of the molecular and structural variability of three types of graptolite periderm. Organic petrology, Raman spectroscopy, and field emission scanning electron microscopy (FE-SEM) with energy dispersive spectroscopy (EDS) were combined to evaluate the thermal evolution process. The three types of graptolite periderm, namely granular, non-granular, and nodular graptolite, were analyzed by Raman spectroscopy wherein point measurements were obtained after the maceral was identified and the location verified by organic petrology. Distinct thermal evolution pathways among non-granular, granular, and nodular graptolite periderms were recorded. The evolution patterns of the Raman parameters, particularly D1 and G bands, highlight the differences in geochemical composition of the graptolite periderm types and the alteration of molecular structure with increasing thermal maturity. Raman parameters D1 (position of the D1 peak), G-FWHM (full width at half maximum of the G peak), and ratios D1-FWHM/G-FWHM (full width at half maximum of the D1 peak ratioed to G-FWHM) and A D1 /A G (ratio of D1 and G peak intensities) showed effectiveness in assessing thermal maturity. Bireflectance with increasing gold tube pyrolysis temperature followed a hierarchy: non-granular > granular > nodular, reflecting different molecular alignment intensities. Qualitative FE-SEM evaluation showed that fine-grained mineral inclusions (primarily Fe-sulfide as determined via EDS) were associated with the graptolite populations, with granular graptolite containing greater amounts of coarser-grained (e.g., ∼300–1400 nm) mineral inclusions relative to non-granular and nodular graptolite, which contain finer-grained (e.g., ∼100–200 nm) inclusions difficult to resolve with optical microscopy. These findings are investigated to highlight the mechanisms that drive organic matter evolution within graptolite during thermal maturation, as well as to explore some of the limitations of using spectroscopic parameters as thermal maturity proxies.

International Journal of Coal Geology↗
USGS1976

Results of phytoplankton sampling at National Stream Quality Accounting Network stations in Montana, 1975 water year

Twelve National Stream Quality Accounting Network stations were operated in Montana during the 1975 water year. The network was established for the purpose of acquiring a base of hydrologic data for use by agencies engaged in water-resources planning on a national or regional scale. Among the characteristics analyzed were phytoplankton identification and cell counts. Samples consisted of composites of equal aliquots, collected at the center of each quartile of flow, using modified suspended-sediment samplers and sediment collection techniques. Identification and counting were done using the Sedgwick-Rafter cell method. Cell counts ranged from 21 cells per millilitre at Flathead River at Flathead, British Columbia to 27,000 cells per millilitre at Yellowstone River near Sidney. The class Bacillariophyceae was most abundant in both number and variety at all sampling sites. Anabaena and Aphanizomenon of the phyllum Cyanophyta were found at six stations and two stations respectively. These two genera of blue-green algae often become abundant in enriched waters resulting in nuisance conditions.

Montana↗
USGS2025

Aquifer storage change and storage properties, Rio Rancho, New Mexico, 2019–23

To better understand changes in groundwater storage and groundwater elevations, the U.S. Geological Survey, in cooperation with the City of Rio Rancho, New Mexico, carried out a multiyear groundwater monitoring project. Groundwater-level data were collected at 27 locations, including sites having multiple wells screened at different depths and those having long-term records. A repeat microgravity network of 20 stations was established, and surveys were carried out three times per year. The microgravity method provides a direct, quantitative measurement of mass change caused by aquifer filling or draining. Data collected during the 2019–23 study period indicate generally stable groundwater conditions, with small fluctuations in groundwater levels (increasing at some wells, declining at others), and small declines in groundwater storage over the period of record at most gravity locations (average = −0.33 foot of water per year). The discrepancy between the water-level and microgravity data may have been caused by a loss of soil moisture in the unsaturated zone, which is as much as 1,000 feet thick in some areas. At the Rio Rancho Advanced Water Treatment Facility, where the city recharges water through direct injection, there may be seasonal correlations in storage related to injection but no longer-term accumulation of recharged water in the immediate vicinity of the facility, indicating water is moving efficiently into the aquifer.

New Mexico↗
USGS2024

Geophysical constraints on continental rejuvenation in central China: Implications for outward growth of the Tibetan Plateau

Continental rejuvenation results from the tectonic reactivation of crustal structures and lithospheric reworking by mantle flow. Geochemical observations and field mapping have traditionally provided the primary evidence for the secular evolution of crustal composition and tectonic processes during continental rejuvenation. Nonetheless, the impact of continental rejuvenation on the observed present-day strain rate and orogenic-scale lithospheric structure has not been well constrained. The pre-existing E-W–trending Central China Orogenic Belt has been overprinted by the N-S–trending Central Longitudinal Seismic Belt and constitutes the intracontinental West Qinling Syntaxis in central China, where the tectonic setting changes eastward from contraction to extension. Combining updated global positioning system data and high-resolution crustal seismic tomography, we reveal a modern continental rejuvenation process within the West Qinling Syntaxis in central China. The northward extrusion of the Tibetan Plateau's weak lithospheric layer (middle-lower crust and lithospheric mantle) of southwestern China relative to the rigid Sichuan Basin/Ordos Block of the eastern West Qinling Syntaxis results in regional dextral shearing that shapes the Central Longitudinal Seismic Belt and defines the eastern Tibetan Plateau margin. The pre-existing E-W–trending Central China Orogenic Belt has been preserved above the brittle-ductile transition zone, and the northward movement of the deep lithospheric layer drives the deformation of the upper crust in the West Qinling Syntaxis. Our results, along with previous studies, suggest the presence of an intracontinental lithospheric interchange structure in central China. The continental rejuvenation of the West Qinling Syntaxis results from a combination of fault reactivation in the upper crust (Stage I, Eocene–Oligocene) and reworking of the deep lithosphere (Stage II, middle–late Miocene) related to the plateau-wide shift in stress accommodation ultimately driven by the redistribution of mass outward from the central Tibetan Plateau. At present, the transition zone between the high- and low-velocity anomalies along the Central Longitudinal Seismic Belt not only shapes the landscape boundary but controls the size and recurrence interval of earthquakes within the West Qinling Syntaxis in central China.

GSA Bulletin↗
USGS2024

New occurrences of the rare, REE minerals daqingshanite, törnebohmite, biraite, sahamalite, and ferriperbøeite from the Sheep Creek area, Montana, USA

Over 30 small, discontinuous, tabular carbonatite bodies are located in the Sheep Creek area, Ravalli County, southwest Montana. The age and origin of these REE-Nb-rich deposits are currently being investigated. The purpose of this paper is to document the occurrence of several rare minerals, including daqingshanite, törnebohmite, biraite, sahamalite, and ferriperbøeite, in two of the carbonatite bodies. These minerals are found in association with monazite, hydroxylbastnäsite, ferriallanite, calcite, dolomite, baryte, quartz, actinolite, apatite, celsian, and Sr-rich aragonite. Automated SEM-EDS was used to target the areas of interest in polished specimens for more detailed spot SEM-EDS and electron probe microanalysis. Raman spectra were also acquired for each of the rare minerals. The complex mineralogy of the Sheep Creek carbonatites is most likely due to several overlapping thermal events, including primary magmatic, overprinting hydrothermal, and supergene weathering stages. The rare minerals described in this study are believed to be hydrothermal and/or carbothermal in origin, although no estimates of temperature are available at this time.

Montana↗
USGS2025

Ordovician stratigraphy, structure, and karst of the Falling Spring Valley, Alleghany County, Virginia, USA

This one-day trip highlights new findings on a preliminary bedrock geologic map that shows results from ongoing geologic mapping in the Falling Spring Valley of Alleghany County, Virginia, USA, which is the southern end of the larger Warm Springs Valley, an elongated anticlinal valley rimmed by Ordovician and Silurian siliciclastic rocks, and which is famous for its thermal springs. This mapping includes stratigraphic, structural, and karst field and lab research focused on the Ordovician strata exposed in the area, the oldest of which is the dolomitic upper part of the Beekmantown Formation (Lower Ordovician, Darriwilian), and the youngest of which is the Juniata Formation (Upper Ordovician, Katian), a sequence of siliciclastic redbeds. Warm Springs Valley is the location of the only known caves in the eastern United States—three at present—with thermal waters flowing in some of their passages. Stops on the trip will highlight key details from mapping efforts, primarily within the structurally deformed Ordovician carbonate sequence that is exposed in the core and limbs of the anticline, as well as the associated karst features that are developed in those carbonate rocks, including results of recent dye traces and water temperature monitoring that have improved our understanding of the karst hydrogeologic systems developed in these strata.

Virginia↗
USGS2025

Pediment formation and subsequent erosion in Gale crater: Clues to the climate history of Mars

Evidence of paleo-rivers, fans, deltas, lakes, and channel networks across Mars has prompted much debate about what climate conditions would permit the formation of these surface water derived features. Pediments, gently sloping erosional surfaces of low relief developed in bedrock, have also been identified on Mars. On Earth, these erosional landforms, often thought to be created by overland flow and shallow channelized runoff, are typically capped by fluvial sediments, and thus in exceptionally arid regions, pediments are interpreted to record past wet periods. Here we document the Greenheugh pediment in Gale crater, exploiting the observational capability of the Curiosity rover. The absence of a fluvial cap suggests that the pediment was likely cut by wind erosion, not fluvial processes. The pediment was then buried by an aeolian deposit (Stimson sandstone) that mantled the lower footslopes of Aeolis Mons (informally known as Mt. Sharp). This burial terminated active wind erosion, preserving the pediment surface (as an angular unconformity). Groundwater was present prior-to, during, and shortly after Stimson deposition, perhaps contributing to lithification and certainly to early diagenesis. Post lithification, wind erosion first cut canyons in the northern most footslopes (north of Vera Rubin ridge). Unlithified gravels were deposited in these canyons, likely due to runoff from Mt. Sharp. Boulder-rich fluvial and debris flow deposits built a > 70 m thick sequence (Gediz Vallis ridge) on the southern Greenheugh pediment. Continued wind erosion left elevated patches of gravel on the northern footslopes, and exposure age dating shows that erosion essentially ceased before 1 Ga (but possibly much earlier). Erosion to the south led to emergence of Vera Rubin ridge, retreat of the Greenheugh pediment, and the formation of Glen Torridon valley. Hence, this footslope environment of Mt. Sharp records climate-driven periods of wind erosion, aeolian deposition (and groundwater activity), surface runoff and sediment deposition, followed by further significant wind erosion that declined to present very slow rates. This likely occurred during the late Hesperian and possibly into the Amazonian.

Icarus↗
USGS2025

Anatectic origin of Mississippian spodumene-bearing pegmatites in western Maine during orogenic plateau collapse

Spodumene pegmatites are an important lithium source, but the processes and tectonic settings in which they form are poorly understood. The Rumford pegmatite district surrounding Plumbago Mountain, western Maine, is host to numerous spodumene pegmatites, including the Plumbago North pegmatite (a world-class spodumene resource). Competing petrogenetic models for these spodumene pegmatites include (1) highly fractionated melts of the Mooselookmeguntic igneous complex and (2) anatexis. We tested these hypotheses by constraining the geologic, magmatic, metamorphic, and tectonic history of the Plumbago Mountain area with detailed geologic mapping and U-(Th)-Pb geochronology. The Silurian Rangeley Formation records initial isoclinal folding prior to, and contact-related metamorphism synchronous with, the intrusion of the 417 ± 4 Ma Plumbago Mountain pluton. Peak amphibolite facies metamorphism and crustal melting occurred during the ca. 410 to 400 Ma Acadian orogeny. Pulsed emplacement of the Mooselookmeguntic igneous complex occurred between ca. 389 and 356 Ma. Cassiterite U-Pb dates of spodumene pegmatites (333–327 Ma) are ≥23 m.y. younger than nearby granitic plutons, strongly arguing against the fractional crystallization model. Metamorphic monazite and xenotime (346–328 Ma) and 330 to 308 Ma 40 Ar/ 39 Ar hornblende dates indicate metamorphism coeval with spodumene pegmatite emplacement, supporting anatectic models. Reheating, anatexis, and spodumene pegmatite emplacement occurred during collapse of the 380 to 330 Ma Acadian orogenic plateau. Lithium enrichment may be linked to one or more stages of partial melting of metasedimentary and plutonic rocks during the formation, tenure, and collapse of the Acadian altiplano and emphasizes the role of anatexis in producing spodumene pegmatites of economic significance.

Maine↗
USGS2025

The 1912 Ms 7.2 earthquake in the Denali region of central Alaska

The 2002 M w 7.9 earthquake in central Alaska ruptured 340 km on three faults—Susitna Glacier thrust fault, Denali fault, Totschunda fault—crossing both the Richardson Highway and the Alaska Pipeline. Its occurrence prompted renewed interest in historical large earthquakes that possibly originated on the Denali fault. One of these earthquakes was a M s 7.2 event on July 7, 1912, which we revisit with two approaches: (1) probabilistic relocation of the epicenter using globally recorded arrival times, and (2) compilation and reassessment of shaking intensity reports to estimate a macroseismic epicenter. Our preferred instrumental epicenter is west of the Parks Highway and in agreement with the maximum‐reported shaking, which was from the Parker–Browne expedition of Denali. We also relocated a M s 6.4 aftershock, whose epicenter is 11 km from the mainshock. Candidate faults for the 1912 earthquake include the Denali fault, the McLeod Creek thrust fault, and the Kantishna Hills thrust fault. Future analysis of active faults, paleoseismic results, 1912 instrumental data, and 1912 felt reports may help in interpreting the fault and mechanism of the 1912 earthquake.

Alaska↗
USGS2026

Seismic characteristics of the April 2024 eruption of Ruang Volcano, North Sulawesi, Indonesia

The two most recent eruptions of Ruang volcano, in 2002 and 2024, have been large (VEI 4) with very short precursory periods, 3 and 6 days, respectively. Background seismicity at Ruang volcano is generally low with 0–2 volcano-tectonic (VT) earthquakes per day. The 2024 eruptions were preceded by a notable increase in VT earthquakes from 11 to 15 April with a rapid escalation from 16 to 17 April in the form of increased VT swarms, and the appearance of low frequency earthquakes and short bursts of VT drumbeats shortly before the eruption. Similar VT seismic unrest was recorded in March 2015, May 2016, and April 2022, although none of these episodes culminated in an eruption. A comparison of seismic energy release between April 2022 and April 2024 shows distinct differences. In 2024, cumulative seismic energy reached its peak within 5 days, just before the onset of eruption on 17 April. In contrast, during the 2022-episode, energy release followed a more gradual increase over 8 days peaking on 16 April, then declining gradually without leading to eruption. Notably, low frequency (LF) and drumbeat earthquakes were absent in non-eruptive unrest episodes. The transition to proximal LFs in 2024 likely signals pressure fluctuations, intensified magma degassing, and conduit formation, acting as an important precursor to eruption. Additionally, the occurrence of short bursts of drumbeat seismicity likely reflects the onset of the shallow magma ascent and was an important short-term precursor to the eruption. Finally, we examine the potential influence of regional tectonic earthquakes on the escalation of precursory unrest in 2024.

North Sulawesi, Ruang volcano↗
USGS1993

Hydraulic properties of the Madison aquifer system in the western Rapid City area, South Dakota

Available information on hydrogeology, data from borehole geophysical logs, and aquifer tests were used to determine the hydraulic properties of the Madison aquifer. From aquifer-test analysis, transmissivity and storage coefficient were determined for the Minnelusa and Madison aquifers, and vertical hydraulic conductivity (K v ') along with specific storage (Ss') for the Minnelusa confining bed. Borehole geophysical well logs were used to determine the thickness and location of the Minnelusa aquifer, the lower Minnelusa confining bed, and the Madison aquifer within the Madison Limestone. Porosity values determined from quantitative analysis of borehole geophysical well logs were used in analyzing the aquifer-test data. The average porosity at the two aquifer-test sites is about 10 percent in the Minnelusa aquifer, 5 percent in the lower Minnelusa confining bed, and 35 percent in the Madison aquifer. The first aquifer test, which was conducted at Rapid City production well #6, produced measured drawdown in the Minnelusa and Madison aquifers. Neuman and Witherspoon's method of determining the hydraulic properties of leaky two-aquifer systems was used to evaluate the aquifer-test data by assuming the fracture and solution-opening network is equivalent to a porous media. Analysis of the aquifer test for the Minnelusa aquifer yielded a transmissivity value of 12,000 feet squared per day and a storage coefficient of 3 x 10 -3 . The specific storage of the Minnelusa confining bed was 2 x 10 -7 per foot, and its vertical hydraulic conductivity was 0.3 foot per day. The transmissivity of the Madison aquifer at this site was 17,000 feet squared per day, and the storage coefficient was 2 x 10 -3 . The second aquifer test, which was conducted at Rapid City production well #5 (RC-5) produced measured drawdown only in the Madison aquifer. Hantush and Jacob's method of determining the hydraulic properties of leaky confined aquifers with no storage in the confining bed was used to evaluate the aquifer-test data by assuming the fracture and solution-opening network is equivalent to a porous media. The analysis of data from the RC-5 aquifer test showed that transmissivity was not equal in all directions. Hantush's method was used to determine the direction of radial anisotropy and magnitude of the major and minor axes of transmissivity. The major axis of transmissivity is at an angle of 42° east of north, and the transmissivity along this axis is about 56,000 feet squared per day. The minor axis of transmissivity is at an angle of 48° west of north, and the transmissivity along this axis is about 1,300 feet squared per day. The major axis of transmissivity intersects Cleghorn Springs, a large resurgent spring on the west edge of Rapid City. The shape of the potentiometric contours of the Madison aquifer near RC-5 agree with the orientation of the transmissivity ellipse. The average value of the storage coefficient from the isotropic analysis of the aquifer-test data was 3.5 x 10 -4 , and the average vertical hydraulic conductivity of the lower Minnelusa confining bed was 9.6 x 10 -3 foot per day.

South Dakota↗
USGS2025

Footprints of past mining in Alaska (USA) derived from high-resolution satellite imagery

Mapping the land area used for mining in the past is essential for guiding the remediation of affected landscapes and assessing the resource potential of related waste products. Despite significant recent progress delineating footprints of active and inactive mining globally, the known inventory of such mine lands remains incomplete. Here, I describe a new map dataset of footprints of land surface disturbance and waste at sites of past mining in Alaska (USA) based on visual interpretation of satellite imagery. This dataset maps 6–14 times the area of previous regional and global mine footprint maps in Alaska and is the first in the region to explicitly delineate mine waste landforms (e.g., tailings piles). The data are publicly available from the U.S. Geological Survey under a “no rights reserved” Creative Commons (CC0) license agreement.

Alaska↗
USGS2025

Evolution of permeability and strength recovery of shear fracture under hydrothermal conditions

Geothermal energy is a clean and renewable resource that depends on the ability to move water through hot rock. In many locations, the ability to move water through rock requires the presence of extensive natural or human-made systems of fractures. However, these fracture systems are influenced by a variety of complex processes that occur at the temperature and pressure conditions found in geothermal reservoirs. To make geothermal systems more efficient, it is important to understand how these fractures evolve over time in response to these processes. This study explored how fractures in rock change under high-temperature and pressure conditions, like those found in geothermal reservoirs, through laboratory experiments and numerical simulations. In general fractures, tend to close due to pressure from the surrounding rock preventing the flow of water. One set of laboratory experiments revealed that fractures in granitic rock can weaken over time at elevated temperatures. These weak fractures can then slip slowly potentially keeping the fracture open for a longer period. This study also showed that at the highest temperature examined (250 °C) large differences between the chemical composition of the rock and the fluid moving through it could improve water flow temporarily likely due to the water dissolving parts of the rock. Flow rate predicted by models shows overall good agreement with the flow rate measured in our experiments but with some long time-scale variations that may be due to mechanical wear of the fracture surface. A second set of experiments found that, over the temperature range examined, the closure of fractures was caused by brittle failure driven by high stresses at points where fracture surfaces were in contact. This result suggests that fracture closure in geothermal reservoirs could be counteracted by maintaining high pore pressures. Additionally, we also tested a new method using electrical resistance to measure fracture closure in controlled systems with high precision.

Final Technical Report↗
USGS2025

The role of alkali bicarbonate-sulfate brines in the genesis of carbonatite REE resources at the Bear Lodge Alkaline Complex, Wyoming

Rare-earth element (REE) resources in the Bear Lodge Alkaline Complex, Wyoming, are hosted in a variably leached carbonatite dike swarm spatially related to bodies of diatreme breccia. This study examines fluid inclusions in carbonatite dikes, peripheral fluorite breccias, and smoky quartz veins to reconstruct the physiochemical conditions of REE mineralization. Results reveal a multi-stage evolution of carbonatitic fluids: 1) high-temperature (330–432°C), CO 2 -rich magmatic fluids, 2) REE-enriched alkali bicarbonate-sulfate brines, and 3) low-temperature meteoric (117–182°C) or diluted magmatic fluids. Multiphase inclusions (stage-2) contain burbankite, nahcolite, and alkali sulfate daughter crystals, linking the brines to early burbankite [(Na,Ca) 3 (Sr,Ba,REE) 3 (CO 3 ) 5 ] mineralization in carbonatite. REE mobility has been linked to the stability of aqueous complexes with ligands such as Cl-, SO 4 2- , and HCO 3 - . However, light REEs were not initially transported significant distances, rather they crystallized as burbankite from brines or brine-melts associated with the carbonatite magma. Crystallization of burbankite removed Na from the system, leaving residual fluids with high K/Na ratios and promoting potassic fenitization throughout the complex. Fractionation of light and heavy REEs and involvement of low temperature (<300°C), high K/Na bicarbonate brines may have facilitated transport and formation of peripheral occurrences that are more enriched in heavy REEs at Bear Lodge.

Wyoming↗
USGS2000

Suspended-sediment characteristics in the Housatonic River Basin, western Massachusetts and parts of eastern New York and northwestern Connecticut, 1994-96

Suspended-sediment concentrations, discharges, loads, and yields were determined for eight subbasins in the Housatonic River Basin in western Massachusetts, eastern New York, and northwestern Connecticut from April 1994 through March 1996. Suspended-sediment samples were collected at three continuous-record sediment stations and at four partial-record sediment stations. Suspended-sediment concentrations in samples collected during the period of study ranged from less than 0.5 to 3,400 milligrams per liter, and concurrent streamflows ranged from 0.03 to 126 cubic feet per second per square mile at the seven stations. Median suspended-sediment concentrations in samples collected at each station ranged from 7 to 61 milligrams per liter. Median streamflows during suspended-sediment sampling ranged from 1.86 to 5.88 cubic feet per second per square mile. Instantaneous suspended-sediment yields ranged from less than 0.005 to 185 tons per day per square mile, and medians ranged from 0.03 to 1.12 tons per day per square mile at the seven stations. Total suspended-sediment loads (mass) from April 1994 through March 1996 at the continuous-record sediment stations were 11,603 tons at Housatonic River near Great Barrington, 7,929 tons at Green River, and 54,347 tons at Housatonic River near Ashley Falls. Suspended-sediment load during January 1996 at the Green River station accounted for about 54 percent of the total suspended-sediment load for the Green River during the 2-year study. Suspended-sediment load on January 19 and 20, 1996, at the Green River station accounted for about 50 percent of the January 1996 suspended-sediment load, or about 27 percent of the total suspended-sediment load during the 2-year study. This large suspended-sediment transport was the result of rainfall and snowmelt on January 19 and 20, 1996--the equivalent of a 5- to 6-inch rain storm in the Green River subbasin. Total suspended-sediment loads during the 2-year study at the partial-record sediment stations were 3,052 tons at Williams River, 1,758 tons at Ironworks Brook, and 17,927 tons at Konkapot River. Suspended-sediment yields from April 1994 through March 1996 at the continuous-record sediment stations were 21 (tons/yr)/mi 2 at Housatonic River near Great Barrington, 78 (tons/yr)/mi 2 at Green River, and 58 (tons/yr)/mi 2 at Housatonic River near Ashley Falls. Suspended-sediment yields during the 2- year study at the partial-record sediment stations were 35 (tons/yr)/mi 2 at Williams River, 78 (tons/yr)/mi 2 at Ironworks Brook, and 147 (tons/yr)/mi 2 at Konkapot River. Suspended-sediment yields were estimated for two subbasins in the Housatonic River Basin--Schenob Brook at Sheffield, a partial-record sediment station, and the area adjacent to the Housatonic River between Great Barrington and Ashley Falls. The estimate of suspended-sediment yield at Schenob Brook at Sheffield of 82 (tons/yr)/mi 2 is comparable to the yield determined for the Green River and Ironworks Brook. The estimate of suspended-sediment yield for the area adjacent to the Housatonic River between Great Barrington and Ashley Falls was 395 (tons/yr)/mi 2 . This estimated suspended-sediment yield was 2.7 to 18.8 times greater than that estimated for any of the other subbasins. Several basin and land-use characteristics thought to affect suspended-sediment transport in the subbasins were compared to the suspended-sediment yields. The characteristics that seemed to affect suspended-sediment discharge were dams, which contributes to decreased yields; Hadley, Limerick, Linlithgo, Saco, and Winooski silt loam soils (high erodibility soils), which contributes to increased yields; stratified-drift deposits, which contributes to increased yields; and agricultural and open land, which contributes to increased yields. The effect of stratified-drift deposits on suspended-sediment discharge is thought to be greater when those deposits are of glaciolacustrine (generally clay, silt, and fine sand), rather than glaciofluvial (clay, silt, sand, gravel, and cobbles) origin. The silt loam soils, glaciolacustrine deposits, and agricultural and open land are interrelated, inasmuch as the silt loam soils generally are associated with glaciolacustrine deposits and agricultural activities.

Connecticut, Massachusetts, New York↗
USGS2000

Regional evaluation of evapotranspiration in the Everglades

Nine sites in the Florida Everglades were selected and instrumented for collection of data necessary for evapotranspiration-determination using the Bowen-ratio energy-budget method. The sites were selected to represent the sawgrass or cattail marshes, wet prairie, and open-water areas that constitute most of the natural Everglades system. At each site, measurements necessary for evapotranspiration (ET) calculation and modeling were automatically made and stored on-site at 15- or 30-minute intervals. Data collected included air temperature and humidity at two heights, wind speed and direction, incoming solar radiation, net solar radiation, water level and temperature, soil moisture content, soil temperature, soil heat flux, and rainfall. Data summarized in this report were collected from January 1996 through December 1997, and the development of site-specific and regional models of ET for this period is described. Latent heat flux is the energy flux density equivalent of the ET rate. Modified Priestley-Taylor models of latent heat flux as a function of selected independent variables were developed at each site. These models were used to fill in periods of missing latent heat flux measurement, and to develop regional models of the entire Everglades region. The regional models may be used to estimate ET in wet prairie, sawgrass or cattail marsh, and open-water portions of the natural Everglades system. The models are not applicable to forested areas or to the brackish areas adjacent to Florida Bay. Two types of regional models were developed. One type of model uses measurements of available energy at a site, together with incoming solar energy and water depth, to estimate hourly ET. This available-energy model requires site data for net radiation, water heat storage, and soil heat flux, as well as data for incoming solar radiation and water depth. The other type of model requires only incoming solar energy, air temperature, and water depth data to provide estimates of hourly ET. The second model thus uses data that are more readily available than the data required for the available-energy model. Computed ET mean annual totals for all nine sites for the 1996-97 period ranged from 42.4 inches per year at a site where the water level is below land surface for several months each year to 57.4 inches per year at an open-water site with no emergent vegetation. Although the density of photosynthetically-active plant leaves has been shown to relate directly to ET in some studies, it does not appear to relate directly to ET in the Everglades, based on comparison of annual ET data with leaf-area index, defined as the Normalized Difference Vegetation Index (NDVI), data from satellite imagery. NDVI and ET appear to be inversely related in the Everglades. The greatest ET rates occurred at open-water sites where the NDVI data indicated the lowest leaf-area index. Among the remaining vegetated sites, there is no clear relation between ET and NDVI, though the highest ET rate corresponded to the lowest NDVI and one of the lowest ET rates corresponded to the highest NDVI value. The variation in ET follows a seasonal pattern, with lowest monthly ET totals occurring in December through February, and highest ET occurring in May through August. The greatest range in monthly ET among all nine sites for the 2-year period occurred at site 3: from 1.81 inches in December 1997 to 6.84 inches in July 1996. A study to compare the Bowen-ratio/energy balance method of ET measurement with the eddy-correlation method was done at one site from June 22, 1998, through September 28, 1998. This comparison indicated that both methods gave comparable values of the Bowen ratio, but there was a considerable difference in available energy measured by the two methods. The mean of all 30-minute measured turbulent heat fluxes from the eddy-correlation apparatus for June 22 through September 29, 1998, was 137.4 watts per square meter, and the mean of the corresponding measured energy was 163.6 watts per square meter, or about 20 percent greater. The disagreement in mean energy fluxes measured by the two methods is problematical and is not fully understood. Although the difference seems to be related to friction velocity, and is practically non-existent at values of friction velocity greater than 0.3 meter per second, the "correctness" of either method cannot be determined with the data available.

Florida↗
USGS2025

Sand provenance boundary in the Mu Us Sandy Land of northern China

Desert dunes are often assumed to have uniform mineral compositions due to extensive mixing during lateral transport, which complicates provenance studies. The Mu Us Sandy Land in north-central China, near the East Asian summer monsoon precipitation boundary, experiences a wetter climate than most deserts. Climate wetting as a result of a warming climate, and the ‘Sand Control Project’ implemented by the Chinese government to decrease the lateral movement of sand dunes in this area provide an opportunity to study surface processes of sand production and transport. Previous studies using zircon U Pb geochronology and heavy mineral composition indicate distinct sand sources for the Mu Us Sandy Land: local basement-derived middle Yellow River sediments and recycled dried-up lacustrine sediments for the eastern part, and northeastern Tibetan Plateau-derived upper Yellow River sediments for the western part. However, zircons and heavy minerals only represent trace amounts of the bulk mineralogy within a sand dune, so broader provenance analysis targeting common minerals is essential. We focus on the area near the proposed provenance difference boundary between the western and eastern Mu Us Sandy Land, using comprehensive sampling and provenance techniques to confirm distinct provenance characteristics and delineate the provenance boundary. Our findings reveal that sand from most of the Mu Us Sandy Land originated from the erosion of local basement by the middle Yellow River and recycled local dried-up lacustrine sediments, whereas the southwestern corner and the neighboring western-central Chinese Loess Plateau received sediments from the distal northeastern Tibetan Plateau.

Mu Us Sandy Land↗
USGS1976

The water quality of Livingston Reservoir on the Trinity River, Southeastern Texas

The concentrations of dissolved solids, chloride, and sulfate in Livingstone Reservoir on the Trinity River in southeastern Texas usually average less than 250 mg/1 (milligrams per litre), 40 mg/1, and 50 mg/1, respectively. The water is usually hard or moderately hard (61 to 180 mg/1 as calcium carbonate). The concentrations of principal dissolved constituents in the reservoir are usually maximum during summer and fall when evaporation is high and inflow is low. Thermal stratification of the reservoir usually begins in March and persists until September or October. Neither the seasonal variation of dissolved constituents in inflow to the reservoir nor thermal stratification has resulted in significant stratification of the principal dissolved constituents. However, thermal stratification has resulted in significant seasonal and areal variations of dissolved oxygen, which results in higher concentration of dissolved iron, dissolved manganese, total phosphorus, and total inorganic nitrogen.

Texas↗