USGS Science⌕ Search

SEARCH · USGS Science

Results for “Tectonics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56Linked to original sources
USGS1994

Geochemistry and argon thermochronology of the Variscan Sila Batholith, southern Italy: source rocks and magma evolution

The Sila batholith is the largest granitic massif in the Calabria-Peloritan Arc of southern Italy, consisting of syn to post-tectonic, calc-alkaline and metaluminous tonalite to granodiorite, and post-tectonic, peraluminous and strongly peraluminous, two-mica??cordierite??Al silicate granodiorite to leucomonzogranite. Mineral 40Ar/39Ar thermochronologic analyses document Variscan emplacement and cooling of the intrusives (293-289 Ma). SiO2 content in the granitic rocks ranges from ???57 to 77 wt%; cumulate gabbro enclaves have SiO2 as low as 42%. Variations in absolute abundances and ratios involving Hf, Ta, Th, Rb, and the REE, among others, identify genetically linked groups of granitic rocks in the batholith: (1) syn-tectonic biotite??amphibole-bearing tonalites to granodiorites, (2) post-tectonic two-mica??Al-silicate-bearing granodiorites to leucomonzogranites, and (3) post-tectonic biotite??hornblende tonalites to granodiorites. Chondrite-normalized REE patterns display variable values of Ce/Yb (up to ???300) and generally small negative Eu anomalies. Degree of REE fractionation depends on whether the intrusives are syn- or post-tectonic, and on their mineralogy. High and variable values of Rb/Y (0.40-4.5), Th/Sm (0.1-3.6), Th/Ta (0-70), Ba/Nb (1-150), and Ba/Ta (???50-2100), as well as low values of Nb/U (???2-28) and La/Th (???1-10) are consistent with a predominant and heterogeneous crustal contribution to the batholith. Whole rock ??18O ranges from ???+8.2 to +11.7???; the mafic cumulate enclaves have the lowest ??18O values and the two-mica granites have the highest values. ??18O values for biotite??honblende tonalitic and granodioritic rocks (9.1 to 10.8???) overlap the values of the mafic enclaves and two-mica granodiorites and leucogranites (10.7 to 11.7???). The initial Pb isotopic range of the granitic rocks (206Pb/204Pb ???18.17-18.45, 207Pb/204Pb ???15.58-15.77, 208Pb/204Pb ???38.20-38.76) also indicates the predominance of a crustal source. Although the granitic groups cannot be uniquely distinguished on the basis of their Pb isotope compositions most of the post-tectonic tonalites to granodiorites as well as two-mica granites are somewhat less radiogenic than the syn-tetonic tonalites and granodiorites. Only a few of the mafic enclaves overlap the Pb isotope field of the granitic rocks and are consistent with a cogenetic origin. The Sila batholith was generated by mixing of material derived from at least two sources, mantle-derived and crustal, during the closing stages of plate collision and post-collision. The batholith ultimately owes its origin to the evolution of earlier, more mafic parental magmas, and to complex intractions of the fractionating mafic magmas with the crust. Hybrid rocks produced by mixing evolved primarily by crystal fractionation although a simple fractionation model cannot link all the granitic rocks, or explain the entire spectrum of compositions within each group of granites. Petrographic and geochemical features characterizing the Sila batholith have direct counterparts in all other granitic massifs in the Calabrian-Peloritan Arc. This implies that magmatic events in the Calabrian-Peloritan Arc produced a similar spectrum of granitic compositions and resulted in a distinctive type of granite magmatism consisting of coeval, mixed, strongly peraluminous and metaluminous granitic magmas. ?? 1994 Springer-Verlag.

Contributions to Mineralogy and Petrology↗
USGS2008

Restoration of Circum-Arctic Upper Jurassic source rock paleolatitude based on crude oil geochemistry

Tectonic geochemical paleolatitude (TGP) models were developed to predict the paleolatitude of petroleum source rock from the geochemical composition of crude oil. The results validate studies designed to reconstruct ancient source rock depositional environments using oil chemistry and tectonic reconstruction of paleogeography from coordinates of the present day collection site. TGP models can also be used to corroborate tectonic paleolatitude in cases where the predicted paleogeography conflicts with the depositional setting predicted by the oil chemistry, or to predict paleolatitude when the present day collection locality is far removed from the source rock, as might occur due to long distance subsurface migration or transport of tarballs by ocean currents. Biomarker and stable carbon isotope ratios were measured for 496 crude oil samples inferred to originate from Upper Jurassic source rock in West Siberia, the North Sea and offshore Labrador. First, a unique, multi-tiered chemometric (multivariate statistics) decision tree was used to classify these samples into seven oil families and infer the type of organic matter, lithology and depositional environment of each organofacies of source rock [Peters, K.E., Ramos, L.S., Zumberge, J.E., Valin, Z.C., Scotese, C.R., Gautier, D.L., 2007. Circum-Arctic petroleum systems identified using decision-tree chemometrics. American Association of Petroleum Geologists Bulletin 91, 877-913]. Second, present day geographic locations for each sample were used to restore the tectonic paleolatitude of the source rock during Late Jurassic time (???150 Ma). Third, partial least squares regression (PLSR) was used to construct linear TGP models that relate tectonic and geochemical paleolatitude, where the latter is based on 19 source-related biomarker and isotope ratios for each oil family. The TGP models were calibrated using 70% of the samples in each family and the remaining 30% of samples were used for model validation. Positive relationships exist between tectonic and geochemical paleolatitude for each family. Standard error of prediction for geochemical paleolatitude ranges from 0.9?? to 2.6?? of tectonic paleolatitude, which translates to a relative standard error of prediction in the range 1.5-4.8%. The results suggest that the observed effect of source rock paleolatitude on crude oil composition is caused by (i) stable carbon isotope fractionation during photosynthetic fixation of carbon and (ii) species diversity at different latitudes during Late Jurassic time. ?? 2008 Elsevier Ltd. All rights reserved.

Organic Geochemistry↗
USGS2006

Crustal structure of the northeastern margin of the Tibetan plateau from the Songpan-Ganzi terrane to the Ordos basin

The 1000-km-long Darlag–Lanzhou–Jingbian seismic refraction profile is located in the NE margin of the Tibetan plateau. This profile crosses the northern Songpan-Ganzi terrane, the Qinling-Qilian fold system, the Haiyuan arcuate tectonic region, and the stable Ordos basin. The P-wave and S-wave velocity structure and Poisson's ratios reveal many significant characteristics in the profile. The crustal thickness increases from northeast to southwest. The average crustal thickness observed increases from 42 km in the Ordos basin to 63 km in the Songpan-Ganzi terrane. The crust becomes obviously thicker south of the Haiyuan fault and beneath the West-Qinlin Shan. The crustal velocities have significant variations along the profile. The average P-wave velocities for the crystalline crust vary between 6.3 and 6.4 km/s. Beneath the Songpan-Ganzi terrane, West-Qinling Shan, and Haiyuan arcuate tectonic region P-wave velocities of 6.3 km/s are 0.15 km/s lower than the worldwide average of 6.45 km/s. North of the Kunlun fault, with exclusion of the Haiyuan arcuate tectonic region, the average P-wave velocity is 6.4 km/s and only 0.5 km/s lower than the worldwide average. A combination of the P-wave velocity and Poisson's ratio suggests that the crust is dominantly felsic in composition with an intermediate composition at the base. A mafic lower crust is absent in the NE margin of the Tibetan plateau from the Songpan-Ganzi terrane to the Ordos basin. There are low velocity zones in the West-Qinling Shan and the Haiyuan arcuate tectonic region. The low velocity zones have low S-wave velocities and high Poisson's ratios, so it is possible these zones are due to partial melting. The crust is divided into two layers, the upper and the lower crust, with crustal thickening mainly in the lower crust as the NE Tibetan plateau is approached. The results in the study show that the thickness of the lower crust increases from 22 to 38 km as the crustal thickness increases from 42 km in the Ordos basin to 63 km in the Songpan-Ganzi terrane south of the Kunlun fault. Both the Conrad discontinuity and Moho in the West-Qinling Shan and in the Haiyuan arcuate tectonic region are laminated interfaces, implying intense tectonic activity. The arcuate faults and large earthquakes in the Haiyuan arcuate tectonic region are the result of interaction between the Tibetan plateau and the Sino–Korean and Gobi Ala Shan platforms.

Tectonophysics↗
USGS2013

Making the case for the Picuris orogeny: Evidence for a 1500 to 1400 Ma orogenic event in the southwestern United States

The early Mesoproterozoic (ca. 1400 Ma) is an enigmatic time in the tectonic evolution of southern Laurentia. Circa 1400 Ma granites within Laurentia and multiple other continents have distinctive geochemistry consistent with crustal extension or mantle upwelling. In the southwestern United States, these granites are commonly foliated and are often spatially associated with km-scale ductile shear zones. Deformation is attributed to intracontinental tectonism driven by active convergence along the distal southern margin of Laurentia. The recent discovery of deformed and metamorphosed, ca. 1450 Ma sedimentary rocks in northern New Mexico has strengthened the case for regional deformation and orogenesis. However, important questions remain about the tectonic significance of these events and how to reconcile tectonic models with granite petrology at the regional to global scale. This trip focuses on the protolith age of Proterozoic metasedimentary rocks and the kinematics, timing, and tectonic significance of deformation, magmatism, and metamorphism for the Mesoproterozoic across different crustal levels in the southern Rocky Mountains to highlight the ongoing questions and controversies regarding the Mesoproterozoic tectonic setting of Laurentia. This field trip will examine some of the diverse and most recently discovered evidence for ca. 1400 Ma orogenesis in the southern Rocky Mountains. We hope this trip will promote new interest and discussion about the Mesoproterozoic tectonic evolution of Laurentia. We will visit multiple outcrops in the Wet Mountains of southern Colorado and the Picuris Mountains of northern New Mexico. Stops in the Wet Mountains are arranged from north to south to examine contrasting styles of ca. 1400 Ma deformation with increasing paleodepth across the tilted Proterozoic crustal section. In the Picuris Mountains, we focus on detrital zircon geochronology and revisions to the lithostratigraphy of Paleoproterozoic and recently documented Mesoproterozoic metasedimentary rocks, the nature of regional metamorphism, and the style of deformation, ca. 1450–1400 Ma.

Geological Society of America Field Guides↗
USGS2008

Trans-Alaska Crustal Transect and continental evolution involving subduction underplating and synchronous foreland thrusting

We investigate the crustal structure and tectonic evolution of the North American continent in Alaska, where the continent has grown through magmatism, accretion, and tectonic underplating. In the 1980s and early 1990s, we conducted a geological and geophysical investigation, known as the Trans-Alaska Crustal Transect (TACT), along a 1350-km-long corridor from the Aleutian Trench to the Arctic coast. The most distinctive crustal structures and the deepest Moho along the transect are located near the Pacific and Arctic margins. Near the Pacific margin, we infer a stack of tectonically underplated oceanic layers interpreted as remnants of the extinct Kula (or Resurrection) plate. Continental Moho just north of this underplated stack is more than 55 km deep. Near the Arctic margin, the Brooks Range is underlain by large-scale duplex structures that overlie a tectonic wedge of North Slope crust and mantle. There, the Moho has been depressed to nearly 50 km depth. In contrast, the Moho of central Alaska is on average 32 km deep. In the Paleogene, tectonic underplating of Kula (or Resurrection) plate fragments overlapped in time with duplexing in the Brooks Range. Possible tectonic models linking these two regions include flat-slab subduction and an orogenic-float model. In the Neogene, the tectonics of the accreting Yakutat terrane have differed across a newly interpreted tear in the subducting Pacific oceanic lithosphere. East of the tear, Pacific oceanic lithosphere subducts steeply and alone beneath the Wrangell volcanoes, because the overlying Yakutat terrane has been left behind as underplated rocks beneath the rising St. Elias Range, in the coastal region. West of the tear, the Yakutat terrane and Pacific oceanic lithosphere subduct together at a gentle angle, and this thickened package inhibits volcanism.

Alaska↗
USGS1984

Vertical crustal movements in Southern California, 1974 to 1978

An extensive resurvey of most of the first-order leveling network in southern California, known as the Southern California Releveling Program (SCRP), was carried out during the first 5 months of 1978. The primary scientific purpose of these measurements was to rapidly update the vertical control record throughout a recently uplifted region of southern California in order to more thoroughly document the vertical component of tectonic movement and to provide a reliable base for comparison with future levelings. Analyses of historic first-order leveling results have clearly demonstrated that a broad crustal upwarping, largely contained within a region consisting of the Transverse Ranges province and an area along the intervening section of the San Andreas fault system, had developed between about 1959 and 1974. Unfortunately, there is strong evidence that parts of the 1978 SCRP data are contaminated by the effects of intrasurvey tectonic deformation, limited surficial failures, and, less certainly, magnetically induced systematic error associated with the use of automatic levels. However, any distortions in leveling results caused by these or other factors are not so serious as to render the SCRP data useless. In fact, the bulk of these data can be accepted at face value, and most of the remaining data can be incorporated with some caution to augment the more reliable parts of the network. The evaluation of the 1978 leveling is based on a combination of circuit-misclosures, local timing of the field observations, analysis of profiles of apparent height changes derived from comparisons with previous levelings, and an analysis of the position and orientation of the various routes in relation to the regional structural grain and the gradients of differential vertical motion established by previous investigations. Comparisons of the 1978 SCRP results with the latest of the previous surveys along each route retained in the analysis show that all but about one-third of the uplift established by leveling data from 1959 to the combined 1974/76 survey period had relaxed by early 1978 through tectonic subsidence. Subsequent limited relevelings along several of the 1978 routes show that rapid tectonic subsidence probably continued through at least early 1979. Despite the pronounced down-to-the-northeast (northeastward) tilt that developed between 1976 and early 1978, the overall shape of the uplift was well preserved. Results of repeated trilateration surveys since 1971 demonstrate that a remarkably uniform and nearly monotonic negative dilatational strain-change trend reversed abruptly between 1977 and 1979. The change from tectonic up to tectonic subsidence is associated with this reversal in horizontal strain accumulation. The reversal in strain trend was expressed as a cessation of the essentially uniaxial north-south contraction, which had been accumulating at about 2? 10 -7/yr (or 0.2 ?strain/yr), accompanied by onset of uniaxial east-west extension at about 5 ? 10 -7/yr (or 0.5 ?strain/yr). Minor earthquakes and occasional swarms of moderate earthquakes were particularly abundant during 1978 and 1979 in conspicuously mobile regions such as the eastern Transverse Ranges and the Salton Trough, areas respectively characterized by nearly complete collapse of the previous maximum uplift and by a dramatic enhancement of the previously identified tectonic subsidence.

Circular↗
USGS1969

Recent surface movements in the Baldwin Hills, Los Angeles County, California

The Baldwin Hills are located in the northwest part of the densely populated Los Angeles basin. They comprise one of several groups of isolated hills that extend along the northwest-trending Newport-Inglewood zone of folds and faults, a structural lineament identified with a series of very productive oil fields. In addition to being the site of the Inglewood oil field, these hills are the site of surface deformation that has been monitored for over 35 years. This record of deformation, which includes differential subsidence, horizontal displacements, and surface rupturing, forms one of the best documented examples of oilfield-associated surface deformation yet recognized. The deformation is described in detail, analyzed as to cause(s), and finally attributed largely or essentially entirely to the exploitation of the spatially-associated Inglewood oil field. The Baldwin Hills are underlain by gently to moderately arched and conspicuously faulted Cenozoic sedimentary and volcanic rocks that overlie crystalline basement rocks at a depth of more than 10,000 feet. The Inglewood fault, a part of the northwest-trending Newport-Inglewood zone, diagonally transects the hills. Right-lateral displacements of 3,000-4,000 feet since middle or late Pliocene time and 1,500-2,000 feet during Quaternary time are indicated by offset structural and physio-graphic features; indications of vertical separations of up to about 200 feet during late Quaternary time occur locally. Evidence of continuing deformation includes recognized seismicity and regional elevation changes. The M5-5 1/2 Inglewood earthquake of 1920, the largest local earthquake of record, is believed to have originated immediately southeast of the Baldwin Hills; it was apparently unassociated with surficial fault displacements. Leveling in and around the west and central Los Angeles basin has shown that lowland stations have been consistently subsiding, whereas foothill stations commonly have been rising. Several seemingly persistent basins of differential subsidence and a zone of positive movement, roughly coincident with the Newport-Inglewood zone, have also been identified in the northwest part of the basin. A prominent, elliptically-shaped, northwest-trending subsidence bowl encompassing the northwest part of the Baldwin Hills, has been defined by repeated level circuits. Partial reconstruction of selected level circuits with respect to a common, relatively stable control point (Hollywood E-11), located on the edge of the subsidence bowl, has permitted evaluation of the subsidence since 1910 and 1911 at two points near the center of the bowl. Thus bench mark PBM 67 is estimated to have subsided approximately 4.324 feet between June 1910 and February 1963; and bench mark PBM 68 (the only bench mark within the subsidence bowl that was leveled prior to 1926 and has been repeatedly leveled since) subsided 3.846 feet between November 1911 and June 1962. Analysis of the available data indicates little if any elevation change at PBM 68 (or elsewhere throughout the Baldwin Hills-Inglewood area) associated with the Inglewood earthquake of 1920. Maximum subsidence of PBM 122 (which has remained very close to the center of subsidence since at . least 1950) between 1911 and 1963 is calculated to have been 5.67 feet. Horizontal displacements (with respect to a north-south base line about 3 miles east of the hills) of six triangulation points within the subsidence bowl have been measured for various periods between 1934 and 1963. Displacements have been generally toward the center of subsidence and almost precisely perpendicular to the immediately adjacent isobases of equal elevation change. Maximum movement has been recorded at triangulation point Baldwin Aux, which was displaced 2.21 feet between 1934 and 1961; horizontal displacements of three additional points ranged from 0.95 foot to 1.85 feet between 1936 and 1961. Displacements of 0.10-0.29 foot were recorded at all six monuments during the period 1961-1963. "Earth cracks" and surficial fault displacements were recognized in the Baldwin Hills at least as early as 1957. The cracks are relatively straight, generally continuous fractures confined to the structural block east of the Inglewood fault; they are concentrated in two areas centering on (1) the Baldwin Hills Reservoir and (2) the Stocker Street-LaBrea Avenue-Overhill Drive intersection. The cracks trend north to north-northeast and are nearly everywhere parallel to or coincident with minor faults and joints, and are generally orthogonal to radii emanating from the center of subsidence. Differential movement along the cracks has been almost entirely dip slip along steep to nearly vertical surfaces, and generally down-dropped toward the center of subsidence. Cumulative displacements have been as much as 6 or 7 inches. Rates of displacement have ranged widely, and the movement has generally occurred as creep or very small discrete jumps. A probable exception is the several inches of differential movement that is believed to have occurred along a crack through the floor of the Baldwin Hills Reservoir on or about December 14, 1963. The contemporary surface movements are attributable to one or more of the following phenomena: (1). exploitation of the Inglewood oil field; (2) changes in the ground-water regimen; (3) compaction of sedimentary materials in response to surface loading; (4) tectonic activity. The following considerations indicate that the differential subsidence is attributable largely or entirely to exploitation of the underlying Inglewood oil field: (1) the coincidence of the centers of the oil field, the producing structure, and the subsidence bowl; (2) the general correspondence between the pattern of subsidence and the outlines of the oil field; (3) the approximate coincidence between the initiation of production and the initiation of subsidence; (4) the generally linear relations between various measures of subsidence and liquid production from both the field as a whole and the exceptionally prolific Vickers zone in particular; (5) the sharp deceleration of subsidence in the eastern block of the field coincident with the initiation of full-scale water flooding there; (6) the many examples of oil fields In which both spatial and temporal associations between production and subsidence are recognized; (7) the many similarities of the subsidence-production relations in the Inglewood field to those in the Wilmington field, where the subsidence has been authoritatively attributed to oilfield operations; (8) the theoretical relation between subsidence or a tendency toward subsidence and increased effective pressure associated with underground fluid extraction. Consideration of six possible explanations for the increasing rather than decreasing or constant rate of subsidence with respect to reservoir fluid pressure decline suggests that measured or calculated down-hole reservoir fluid pressure decline is non-representative of average or real fluid pressure decline away from producing wells. The near-linear relations between net-liquid production and subsidence are explained through analogy with a tightly confined artesian system of infinite areal extent, where production must derive from liquid expansion and/or reservoir compaction. Test data from compaction studies in two other oil fields yield estimates of ultimate compaction of the Vickers zone resulting from a total loss of fluid pressure; these estimates range over an order of magnitude. The best estimate, based on these data and considerations of late Cenozoic history in the Baldwin Hills area, is about 10 feet. The centripetally-directed horizontal movements are considered attributable to exploitation of the Inglewood oil field on the basis of: (1) their well-defined symmetrical and geometrical association with the differential subsidence; (2) the similarities between these associations and those developed in and around other subsiding oil fields; and (3) the mechanical compatibility of these movements with subsidence induced by the extraction of subsurface materials. The earth cracks and surficial fault displacements are considered largely or entirely attributable to the exploitation of the Inglewood oil field on the basis of: (1) their spatial and temporal relations to both oil-field operations and the differential subsidence; (2) the similarities of these cracks and displacements to those generated in and around other oil fields and areas of subsurface materials extraction; and (3) surface strain patterns predicted from the measured vertical and horizontal surface movements. The cracks and displacements can i)e explained by an exploitation-based, elastic-rebound model which requires elastic compression of the sedimentary section in response to compaction-induced downdrag within those blocks around the periphery of the subsidence bowl. The measured displacements have been about one-quarter to one-half those predicted for a purely elastic system. Analysis of: (1) the history of ground-water extraction within and around the Baldwin Hills; and (2) subsidence associated with water-level declines in sediments comparable with those in the Baldwin Hills, indicate that the surface movements can be no more than incidentally attributed to changes in ground-water conditions. Similarly, analysis of the history of natural and artificial changes in surface loading indicate that these movements are generally unassociated with changes in surface loading conditions. Considerations of local geologic history and various tectonic associations indicate that it is very unlikely that the differential subsidence and horizontal movements are due to tectonic downwarping. There exists a far stronger prima facie argument for tectonic involvement in the earth cracking and associated fault displacements. This argument is disputed by; (1) the spatial and temporal relations of the earth cracks to, and their mechanical compatibility with, the nontectonic differential subsidence; (2) the absence of displacements on the Inglewood fault in conjunction with those along the conjugate earth cracks; (3) the probability that purely tectonic displaceMents would be characterized by oblique or strike slip; and (4) the absence of any clear temporal relation between crack growth and local seismicity, However, because as much as 10 percent of the local isobase gradient may be unexplained' by oil-field exploitation, a small fraction of this gradient, and thus the displacements among the southern group of cracks, may be attributable to tectonic activity. This fraction should have been insignificant in the presence of the strain pattern produced by nontectonic compaction of the underlying oil measures. Because nearly all of the observed and measured surface movements can be fully explained as the products of oil-field operations, yet can be no more than incidentally attributed to changes in ground-water conditions, surface loading, or tectonic activity, we conclude that these movements are attributable largely or essentially entirely to the exploitation of the Inglewood oil field.

California↗
USGS1989

Geology of the Arabian Peninsula; shield area of western Saudi Arabia

Western Arabia lies within the low-latitude desert of north Africa and the Middle East, the core being the Arabian segment of the African Shield. The core of complex basement rocks accounts for about 670,000 km 2 , or one-third of the Arabian Peninsula. Reconnaissance mapping of these crystalline rocks, together with bordering sedimentary rocks and volcanic flows, begun in 1950, resulted during the next 13 years in a series of geologic and geographic maps without extensive texts. The maps served as general guides for development of natural resources, including water supplies, ore deposits, and building materials. An intensive exploration program that began in 1963 and involved numerous geologists has vastly increased geologic information. Rainfall in Arabia is meager and episodic, and vegetation is sparse except in isolated copses on the crest of the Hejaz Range. Comparison of flora with similar species in the Sudan, where records of rainfall have long been kept, allows evaluation of mean annual precipitation. Wandering bedouin following fodder created a delicate balance between population and water supply-now disturbed by wells drilled in alluvium and lava fields. A trapezoidal region of Precambrian crystalline rocks lies along the northeast flank of the Red Sea, with two long prongs extending northwest and southeast for a total of 1,800 km. These basement rocks of the Arabian Shield are well exposed on the uplands, scarp mountains, and coastal pediments where the Phanerozoic cover rocks have been stripped as a result of Paleozoic epeirogeny and Tertiary ramping. The shield outcrops are divided into three tectonic provinces by N. 45°W.- trending shear zones of the Najd fault system of latest Proterozoic and possibly earliest Paleozoic time. The southwestern province, the 'Asir1 upland, was sharply uplifted and tilted to the northeast during the Neogene. The northwestern province, consisting of the Ash Shifa'- Hisma upland as well as Jabal Shammar farther east, similarly was uplifted and tilted. These two provinces are separated by the flat-lying median N ajd province, which is chiefly bounded by the principal Najd faults. The outcrops of the shield rocks are of the Late Proterozoic Eonupper Riphean to Vendian or Infracambrian epochs, including the Ediacarian System. The most reliable isotopic ages range from about 900 to 560 m.y., but some Middle Proterozoic rocks may be present in the easternmost shield. The rocks are divided into six lithostratigraphic sequences, two plutonic suites, and an ophiolitic suite. The mafic and ultramafic volcanic and plutonic rocks of the ophiolitic suite everywhere were emplaced tectonically and are probably of different ages in different places. Some ophiolite occurs as obducted blocks, but most is highly deformed and altered to serpentinite in fault zones that mostly define sutures between different tectonic blocks or terranes within the shield. Three of the lithostratigraphic sequences consist of mafic to silicic volcanic rocks and volcanic-derived clastic rocks which, with their subvolcanic plutonic rocks of a dioritic suite, probably formed in oceanic island arcs during convergent plate tectonism. These rocks make up the primary, or first-formed, crust of the shield. Chemical analyses show that the primary shield rocks, regardless of age, are principally calc-alkalic with some associated tholeiitic varieties. Most of the layered rocks are andesitic, but they range from basalt to dacite and in places contain intercalated pillow basalt, marble, chert, and carbonaceous or graphitic schist. Most of the plutonic rocks of the dioritic suite are dioritic, but they range from gabbro to trondhjemite and rarely contain potassium feldspar. The sequences and an associated dioritic suite become younger toward the eastern shield, that is, the primary crust of the shield youngs toward the east. Two western sequences consist of the Jiddah (Samran) and BaishBahah Groups and range in radiometric age from about 900 to 800 m.y.; the eastern sequence consists of the Halaban (Hulayfah) Group and ranges from 800 to about 700 m.y. During subsequent orogeny, most of the rocks were intensely deformed and mostly metamorphosed to upper greenschist facies, but rising in places to the almandine-amphibolite facies. Two other lithostratigraphic sequences with an associated plutonic granitic suite are the products of two mountain-building episodes during which the primary crust was greatly thickened and converted into craton. The two sequences, including largely the Ablah (Al Ays) and Murdama (Shammar) Groups, consist of abundant sedimentary rocks, commonly arkosic, that are the erosional products of the orogenic mountains. They are several thousand meters thick. Less abundant calc-alkalic to alkalic volcanic rocks, commonly dacitic and rhyolitic, are intercalated with the sedimentary rocks. The plutonic rocks of the granitic suite in association with both sequences have syntectonic and posttectonic phases, are products of the orogenies, and are the principal new ingredients making up the craton. Gneiss domes were a significant part of these cratonization orogenies. In association with orogenic crustal heating, some of the low-density, more silicic tonalitic and trondhjemitic rocks of the primary crust rose as gneiss domes. Partial melting in the middle or lower crust below the gneiss domes produced large volumes of granitic magma that intruded the gneiss domes as granodioritic batholiths. The Ablah Group and the older part of the granitic suite are about 775 to 740 Ma old and are associated with the Ablah orogeny and early cratonization in the western and earlier formed half of the shield. The Murdama (Shammar) Group and the younger part of the granitic suite are about 660 to 580 Ma old and are associated with the culminant orogeny and late cratonization that was shieldwide. The granitic suite during both orogenies consists of early, syntectonic granodiorite batholiths associated with the gneiss domes and late, posttectonic monzogranite plutons. Only during the culminant orogeny, late magmatic evolution produced syenogranite and alkali-feldspar granite commonly in circular and ring-structured plutons and with associated explosive volcanic deposits (Shammar Group); final products, some of which have economic potential, were peralkalic and peraluminous. The late plutonism of the culminant orogeny was distinctly bimodal in that subordinate gabbroic rocks are associated with the granites. Various building blocks or terranes of the andesitic and dioritic primary crust were collisionally agglomerated during the Ablah orogeny, early cratonization, whereas the entire shield as currently exposed was further collisionally accreted and compressionally consolidated during the culminant orogeny, final cratonization. Thousands of kilometers of oceanic crust had to be subducted in about 300 m.y. to form the large primary crust of the Arabian Shield. The inevitable collisional events during consumption of such a large volume of oceanic crust invariably led to numerous collisional orogenies that collectively encompass the widely known Pan African tectonic episode. The youngest lithostratigraphic sequence, the Jubaylah Group, is essentially postcratonic, although it is the end product of the collisional culminant orogeny. Final east-west compression of the entire shield from about 580 to 560 m.y. caused the craton to fracture along the large northwest-trending, left-lateral faults and elsewhere along lesser, northeast-trending, right-lateral, conjugate faults of the N ajd fault system. Erosional products of this more localized deformation were the sedimentary rocks of the Jubaylah Group, which also includes intercalated andesitic to basaltic volcanic rocks of a mafic alkalic compositional trend. The collisional edge of an old continental plate (or tectonic fragments thereof), suspected on the eastern edge of the Arabian Shield, has not been shown with certainty to be exposed. Presumably, widespread contamination from such an old continental crust affects U/Pb, Sm/Nd, Rb/Sr, and common lead ratios in the young plutonic rocks of the easternmost shield. One mass of anorthosite near Jabal Khida' on the central eastern edge of the shield may be a fragment of this old continental plate in that associated granodiorite may be as old as 1,600 to 1,800 Ma. Epeirogenic uplift, erosion, and cooling of the uppermost shield during Early and Middle Cambrian time is indicated by an average fission track age of 510±52 m.y., on sphene from diorite (hornblende K-Ar age of 615±12 m.y.) in the southwestern part of the shield. The hiatus was followed by extensive deposition of the Cambro-Ordovician Saq Sandstone in the north and northeast and the Wajid Sandstone in the southeast and south of the shield. The Cambrian Siq Sandstone had already been deposited in the northern part. During the middle and late Paleozoic, broad epeirogeny caused further erosion of the shield until marine transgression deposited the Upper Permian Khuff Formation at least in the eastern part of the shield. In the southwestern shield, the nonmarine Upper Triassic Khums Sandstone was deposited variably on Wajid or Precambrian rocks and is overlain by limestone of the middle Upper Jurassic Amran Formation. Except for shallow marine sandstone of problematic Cretaceous age deposited on the Amran Formation in the south.western shield and on Precambrian rocks in the northwestern shield, the younger beds on the shield are Paleocene and younger, with the possibility that the lowermost are upper Maestrichtian. The early Tertiary beds contain vertebrate fossils of coastal marine or estuarine environment 250 km east of the Red Sea in the central shield. Marginal marine sediments were deposited in a western tongue of the latest Tethys Sea as late as Eocene on the western shield and at least as far south as Jiddah. The great harrats of flood basalt erupted on th~ western shield during late Oligocene and early Miocene at the same time a 2,000-kmlong continental rift valley developed along the future Red Sea axis. Within this rift valley, Baid freshwater tuffaceous lakebeds were deposited between mafic and silicic volcanoes. During late early Miocene time, the Red Sea opened at a rate of 4.4 cm/yr in a firststage movement while continental dikes and swarms of oceanic tholeiitic dikes, gabbro, and granophyre plutonic rocks were intruded into the rift sedimentary and volcanic rocks at the newly formed continental margin. The continental margin was deformed and greatly extended at this time. About 14 or 15 m.y., as the first-stage spreading stopped, the Red Sea Escarpment rose; its erosion caused deposition of coarse conglomerate of the Bathan Formation. About 3,000 m of evaporite was deposited on the young Red Sea oceanic crust during the late Miocene desiccation crisis. A second stage of sea-floor spreading about 4-5 m.y. produced the Red Sea axial trough, consisting of oceanic crust, as well as renewed uplift and tilting of the three tectonic provinces in response to compression from counterclockwise rotation against the Dead Sea Rift. This late movement caused widespread major stream capture, especially along the wadis that formerly drained southwesterly or northwesterly, the channels turning westward through narrow gorges to the coastal plain and the Red Sea.

Professional Paper↗
USGS2015

Tremor-genic slow slip regions may be deeper and warmer and may slip slower than non-tremor-genic regions

Slow slip events (SSEs) are observed worldwide and often coincide with tectonic tremor. Notable examples of SSEs lacking observed tectonic tremor, however, occur beneath Kīlauea Volcano, Hawaii, the Boso Peninsula, Japan, near San Juan Bautista on the San Andreas Fault, California, and recently in Central Ecuador. These SSEs are similar to other worldwide SSEs in many ways (e.g., size or duration), but lack the concurrent tectonic tremor observed elsewhere; instead, they trigger swarms of regular earthquakes. We investigate the physical conditions that may distinguish these non-tremor-genic SSEs from those associated with tectonic tremor, including slip velocity, pressure, temperature, fluids, and fault asperities, although we cannot eliminate the possibility that tectonic tremor may be obscured in highly attenuating regions. Slip velocities of SSEs at Kīlauea Volcano (∼10 −6 m/s) and Boso Peninsula (∼10 −7 m/s) are among the fastest SSEs worldwide. Kīlauea Volcano, the Boso Peninsula, and Central Ecuador are also among the shallowest SSEs worldwide, and thus have lower confining pressures and cooler temperatures in their respective slow slip zones. Fluids also likely contribute to tremor generation, and no corresponding zone of high v p /v s has been noted at Kīlauea or Boso. We suggest that the relatively faster slip velocities at Kīlauea Volcano and the Boso Peninsula result from specific physical conditions that may also be responsible for triggering swarms of regular earthquakes adjacent to the slow slip, while different conditions produce slower SSE velocities elsewhere and trigger tectonic tremor.

Alaska, California, Hawaii↗
USGS1989

A record of Appalachian denudation in postrift Mesozoic and Cenozoic sedimentary deposits of the U.S. Middle Atlantic continental margin

The complex interplay between source-terrain uplift, basin subsidence, paleoclimatic shifts, and sea-level change, left an extensive sedimentary record in the contiguous offshore basins of the U.S. middle Atlantic margin (Salisbury Embayment, Baltimore Canyon Trough, and Hatteras Basin). Isopach maps of 23 postrift (Lower Jurassic to Quaternary) a allostratigraphic units, coupled with a revised stratigraphic framework, reveal that tectonism, by regulating sediment supply (accumulation rate), dominated the interplay of forcing mechanisms. Tectonic pulses are evidenced by abruptly accelerated sediment accumulation, marked latitudinal shifts in the location of depocenters, and regional changes in lithofacies. Relatively rapid tectonic subsidence during the Early and Middle Jurassic history of the basins may have enhanced sediment accumulation rates. Beginning in the Late Jurassic, however, subsidence rates decreased significantly, though occasional short pulses of subsidence may have effected relative sea-level rises. Sea-level change heavily influenced the distribution and redistribution of sediments one they reached the basins, and paleoclimate regulated the relative abundance of carbonates and evaporites in the basins. We conclude that source terrains of the central Appalachian Highlands were tectonically uplifted, intensely weathered, and rapidly eroded three times since the Late Triassic: (1) Early to Middle Jurassic (Aalenian to Callovian); (2) mid-Early Cretaceous (Barremian); and (3) Late Cenozoic (Middle Miocene). Intervals of tectonic quiescence following these three tectonic pulses provided conditions suitable for the formation of regional erosion surfaces, geomorphic features commonly reported to characterize the central Appalachian Highlands. This series of three, irregularly spaced, tectonic/quiescent cycles does not, however, match the traditional four-cycle concept of post-Triassic Appalachian “peneplanation”.

Geomorphology↗
USGS2008

Introduction to the special section northeast Japan: A case history of subduction

Subduction-related tectonic events such as strike-slip faulting, uplift of high-pressure metamorphic rocks in the forearc, back arc spreading, arc magmatism, and continental collisions have shaped northeast Japan, making it a case history for subduction. Much of the record of these events is preserved and can be used to reconstruct the tectonic history of the region. Although many geological, geophysical, and geochemical data have been collected in Japan for the last 30 years, interpretation of these data into a plate tectonic context did not really begin until about 10 years ago. Much of the data and interpretation on northeast Japan have been published in Japanese or as individual local studies. The primary goal of this special section is to present new investigations covering a wide range of topics and scales and place them in a tectonic framework. The papers in this special section focus on three main subjects: Mesozoic aspects of northeast Japan; the relation of Japan Sea opening with the tectonics and geochemistry of northeast Japan in the Tertiary; and the geophysical setting. The purpose of this overview is to link these subjects and provide a tectonic framework for north- east Japan and eastern Asia since the Mesozoic.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Late Neogene geohistory analysis of the Humboldt basin and its relationship to convergence of the Juan de Fuca plate

Geohistory analysis of Neogene Humboldt basin strata provides important constraints for hypotheses of the tectonic evolution of the southern Cascadia subduction margin, leading up to the arrival of the Mendocino triple junction. This analysis suggests that the tectonic evolution of the Humboldt basin area was dominated by coupling between the downgoing Juan de Fuca plate and the continental margin. This coupling is reflected in the timing of major hiatuses within the basin sedimentary sequence and margin uplift and subsidence which occur during periods of tectonic plate adjustment. Stratigraphic evidence indicates that Humboldt basin originated at the base of the continental slope in early Miocene time. Syndepositional uplift of basin strata began in the late Pliocene and was both thermal isostatic and tectonic in origin. Isostatic uplift was a function of an increasingly more buoyant slab being subducted, whereas tectonic uplift was due to imbricated thrusting of the accretionary complex and underplating of offscraped sediment during subduction. A component of margin uplift is postulated to have been caused by a change in the rate of convergence between the Juan de Fuca and North American plates. Coeval with late Pliocene uplift documented onshore was a sharp decrease in covergence rate ∼3 Ma. A reduction in rate of tectonic uplift, observed in the Eel River section, in early Pleistocene time was coeval with a marked increase in relative motion parallel to the continental margin. This localized subsidence may have been caused by syndepositional folding.

Journal of Geophysical Research Solid Earth↗
USGS2013

Seismicity of the Earth 1900–2010 Middle East and vicinity

No fewer than four major tectonic plates (Arabia, Eurasia, India, and Africa) and one smaller tectonic block (Anatolia) are responsible for seismicity and tectonics in the Middle East and surrounding region. Geologic development of the region is a consequence of a number of first-order plate tectonic processes that include subduction, large-scale transform faulting, compressional mountain building, and crustal extension. In the east, tectonics are dominated by the collision of the India plate with Eurasia, driving the uplift of the Himalaya, Karakorum, Pamir and Hindu Kush mountain ranges. Beneath the Pamir‒Hindu Kush Mountains of northern Afghanistan, earthquakes occur to depths as great as 200 km as a result of remnant lithospheric subduction. Along the western margin of the India plate, relative motions between India and Eurasia are accommodated by strike-slip, reverse, and oblique-slip faulting, resulting in the complex Sulaiman Range fold and thrust belt, and the major translational Chaman Fault in Afghanistan. Off the south coasts of Pakistan and Iran, the Makran trench is the surface expression of active subduction of the Arabia plate beneath Eurasia. Northwest of this subduction zone, collision between the two plates forms the approximately 1,500-km-long fold and thrust belts of the Zagros Mountains, which cross the whole of western Iran and extend into northeastern Iraq. Tectonics in the eastern Mediterranean region are dominated by complex interactions between the Africa, Arabia, and Eurasia plates, and the Anatolia block. Dominant structures in this region include: the Red Sea Rift, the spreading center between the Africa and Arabia plates; the Dead Sea Transform, a major strike-slip fault, also accommodating Africa-Arabia relative motions; the North Anatolia Fault, a right-lateral strike-slip structure in northern Turkey accommodating much of the translational motion of the Anatolia block westwards with respect to Eurasia and Africa; and the Cyprian Arc, a convergent boundary between the Africa plate to the south, and Anatolia Block to the north.

Open-File Report↗
USGS1989

Studies of geology and hydrology in the Basin and Range Province, Southwestern United States, for isolation of high-level radioactive waste - Basis of characterization and evaluation

The geologic and hydrologic factors in selected regions of the Basin and Range province were examined to identify prospective areas for further study that may provide isolation of high-level radioactive waste from the accessible environment. The six regions selected for study were characterized with respect to the following guidelines: (1) Potential repository media; (2) Quaternary tectonic conditions; (3) climatic change and geomorphic processes; (4) ground-water conditions; (5) ground-water quality; and (6) mineral and energy resources. The repository medium will function as the first natural barrier to radionuclide travel by virtue of associated slow ground-water velocity. The principal rock types considered as host media include granitic, intermediate, and mafic intrusive rocks; argillaceous rocks; salt and anhydrite; volcanic mudflow (laharic) breccias; some intrusive rhyolitic plugs and stocks; partially zeolitized tuff; and metamorphic rocks. In the unsaturated zone, the permeability and hydrologic properties of the rocks and the hydrologic setting are more important than the rock type. Media ideally should be permeable to provide drainage and should have a minimal water flux The ground-water flow path from a repository to the accessible environment needs to present major barriers to the transport of radionuclides. Factors considered in evaluating the ground-water conditions include ground-water traveltimes and quality, confining beds, and earth materials favorable for retardation of radionuclides. Ground-water velocities in the regions were calculated from estimated hydraulic properties of the rocks and gradients. Because site-specific data on hydraulic properties are not available, data from the literature were assembled and synthesized to obtain values for use in estimating ground-water velocities. Hydraulic conductivities for many rock types having granular and fracture permeability follow a log-normal distribution. Porosity for granular and very weathered crystalline rock tends to be normally distributed; porosity of fractured crystalline rock probably follows a log-normal distribution. The tectonic setting needs to prevent an increase in radionuclides to the accessible environment. Data on historic seismicity and heat flow, Quaternary faults, volcanism, and uplift were used to assess the tectonic conditions. Long-term late Cenozoic rates of vertical crustal movement in the Basin and Range province range from less than 2 meters per 104 years to greater than 20 meters per 104 years. Shortterm rates of vertical movement may be more than an order of magnitude greater, based on geodetic leveling. Changes in tectonic and climatic processes may potentially cause changes in hydrologic conditions and geomorphology that could affect the integrity of a deep, mined repository either adversely or beneficially. The transition from a full-glacial climate to the current interglacial condition has occurred within the past 15,000 years. Reconstructions of the last full-glacial climate indicate that, at that time, there was greater water availability for runoff and vegetation growth than there is now. Based on the increased water availability and depending on seasonal distribution of precipitation, on soil characteristics, on topography, and on other characteristics, ground-water recharge during the full-glacial climate is estimated to have been possibly 2 to 10 or more times the modern rate. During the full-glacial climate, more than 100 lakes occupied closed basins in the province. Any increase in ground-water recharge and refilling of Pleistocene lakes will tend to decrease the distance of ground-water flow and its time of travel. The unsaturated zone this zone is considered a potential host medium where the thickness is greater than 150 m will be decreased by these changes. In contrast, incision of streams and other geomorphic, tectonic, or climatically induced changes that lower the ground-water discharge level will tend to increase the thickness of the unsaturated zone. Aggradation in basinal troughs may either decrease or increase the thickness of the unsaturated zone. Aggradation in basins that causes the ground-water discharge level to rise will tend to decrease the thickness of unsaturated zone in the adjacent uplands; aggradation in basins where the ground-water discharge level remains the same or is lowered will increase the unsaturated thickness of basin fill. Records show that, throughout late Cenozoic time in the Basin and Range province, continued vertical crustal movements have tended to maintain mountain ranges and closed basins, whereas aggradation of the basins and erosion of the mountain ranges have tended to decrease the topographic relief. Maximum rates of denudation for small basins in areas climatically similar to the Basin and Range province are about 2 meters per 104 years. For sites unaffected by stream incision and scarp retreat, a conservative estimate of erosion affecting long-term changes in depth of burial would appear to be 2 meters per 104 years, or, equal to the long-term rate of vertical crustal movement where greater than 2 meters per 104 years. The response of the ground-water conditions to climatic and geomorphically induced boundary conditions is significant from the points of: (1) The potential maximum change in the ground-water flow system; (2) the time of response of the ground-water system; and (3) the present state of the ground-water system as a result of past changes. Effects of longterm climatic and tectonic changes on hydrologic and geomorphic conditions differ from area to area, and rates of change of geomorphic and hydrologic conditions may vary significantly. Therefore, sitespecific studies need to be made to assess the long-term integrity of deep, mined repositories.

Arizona, California, Idaho, Nevada, New Mexico, Te↗
USGS1991

Cenozoic giant pectinids from California and the Tertiary Caribbean Province: Lyropecten, "Macrochlamis," Vertipecten, and Nodipecten species

Tertiary pectinids recognized for more than 125 years by field geologists can now be used to date and correlate 3-4 m.y. increments of the geologic record and to determine faunal distributions in relation to tectonic terranes. Fossil pectinids are commonly preserved in shallowmarine clastic deposits that mostly lack microfossils. The stratigraphic ranges of Lyropecten, "Macrochlamis," Vertipecten , and Nodipecten can be used to subdivide provincial megafaunal stages in California and to correlate chronostratigraphic units in the Pacific Northwest and Atlantic Coastal Plain. One New World taxon, "Macrochlamis" magnolia ojaiensis, n. subsp., supports a direct correlation between the middle "Vaqueros" Stage of California (interpolated as 27-23 m.y. B.P.) and an Upper Chattian-Lower Aquitanian Stage section in southwestern Switzerland. Two lithologic units widespread in California, the Vaqueros Formation (spanning 12 m.y., from the late Oligocene into the early Miocene) and Temblor Formation (deposited over a period of 26 m.y., from the late Eocene or early Oligocene to the middle Miocene), transgress much longer periods of time than have been generally recognized. Certain species pairs are identified as cognates, close relatives descended from a common ancestor. Close similarities are found between widely separated assemblages from the Salton Trough of California and the Caribbean, the Gulf Coastal Plain of eastern Mexico and the Sinu Valley of western Colombia, the Santa Rosalia area in Baja California Sur, Mexico, and the Paraguana Peninsula of Venezuela. Distribution patterns for relatively recently dispersed taxa have important implications for middle to late Cenozoic paleogeography and tectonic history, especially in west Mexico and the Caribbean. Speciation was concurrent with the closure of the Isthmus of Panama, the opening of the Gulf of California, and possibly with the northward translation of segments of the California Continental Borderland. Tertiary Caribbean and PacificPanamic Lyropectens and Nodipectens are plotted on a simplified tectonic map as an early step in considering Cenozoic molluscan distributions in relation to major plate boundaries. Taxa having unusual distributions are tabulated with the tectonic events that may have modified their observed geographic ranges. Southern California and the Baja California peninsula include tectonostratigraphic terranes and tectonic slivers that may have moved on the order of hundreds or thousands of kilometers in the Paleogene. Relations between recently dispersed faunas and tectonic terrane boundaries are further complicated by short-term variations in oceanographic phenomena such as currents, El Nino events, and shifts in areas of upwelling. Lyropecten evolved in the late Oligocene or early Miocene, Nodipecten by the late middle Miocene. According to the classification used here, Lyropecten still lives in the Galapagos. Holocene Nodipectens divide the Pacific-Panamic and Caribbean provinces into two subprovinces each. Habitat, life history, dispersal, and growth data are summarized for living Nodipectens, whose distinctive shell features include ledges and hollow nodes. Phylogenetic lineages are based on progressive trends in node formation and rib schemes, some of which have biostratigraphic significance.

Professional Paper↗
USGS1969

Effects of the earthquake of March 27, 1964, on various communities

The 1964 earthquake caused wide-spread damage to inhabited places throughout more than 60,000 square miles of south-central Alaska. This report describes damage to all communities in the area except Anchorage, Whittier, Homer, Valdez, Seward, the communities of the Kodiak group of islands, and communities in the Copper River Basin; these were discussed in previous chapters of the Geological Survey's series of reports on the earthquake. At the communities discussed herein, damage resulted primarily from sea waves of diverse origins, displacements of the land relative to sea level, and seismic shaking. Waves took all of the 31 lives lost at those communities; physical damage was primarily from the waves and vertical displacements of the land relative to sea level. Destructive waves of local origin struck during or immediately after the earthquake throughout much of Prince William Sound, the southern Kenai Peninsula, and the shores of Kenai Lake. In Prince William Sound, waves demolished all but one home at the native village of Chenega, destroyed homesites at Point Nowell and Anderson Bay, and caused varying amounts of damage to waterfront facilities at Sawmill Bay, Latouche, Port Oceanic, Port Nellie Juan, Perry Island, and western Port Valdez. The local waves, which ran up as high as 70 feet above tide level at Chenega and more than 170 feet in several uninhabited parts of the Sound, took nearly all of the lives lost by drowning at these communities. Destructive local waves that devastated shores of Anderson Bay and adjacent parts of western Port Valdez probably were generated primarily by massive submarine slides of glacial and fluvioglacial deposits ; the origin of the waves that caused damage at most of the other communities and at extensive uninhabited segments of shoreline is not known. At these places the most probable generative mechanisms are: unidentified submarine slides of unconsolidated deposits, and (or) the horizontal tectonic displacements, of 20 to more than 60 feet, that occurred in the Prince William Sound region during the earthquake. A train of long-period seismic sea waves that began about 20 minutes after the start of the earthquake inundated shores along the Gulf of Alaska coast to a maximum height of 35 feet above tide level. At the communities described, they virtually destroyed two logging camps at Whidbey Bay and Puget Bay on the south coast of the Kenai Peninsula, caused moderate damage to boat harbors and docks at Seldovia and Cordova, floated away some beach cabins in the Cordova area, and drowned two people, one at Point Whitshed near Cordora and one at the Cape Saint Elias Light Station. The seismic sea waves were generated by regional tectonic uplift of the sea floor on the Continental Shelf. Vertical tectonic displacements of the land relative to sea level that accompanied the earthquake affected virtually all the coastal communities. Tectonic subsidence of 5 to 6 feet, augmented locally by surficial subsidence of unconsolidated deposits required either the relocation or raising of structures at Portage, Girdwood, and Hope on Turnagain Arm. Shoreline submergence resulting from about 3½ feet of tectonic subsidence at Seldovia necessitated raising all waterfront facilities and the airstrip above the level of high tides. On the other hand, tectonic uplift of the land in the Prince Williams Sound region required deepening of the small-boat harbors at Cordora and Tatitlek, dredging of the waterways in the Cordova area, and lengthening of some docks or piers at Cordova, the Cape Hinchinbrook Light Station, and in Sawmill Bay. Significant structural damage from direct seismic shaking was largely confined to fluid containers and a pier facility near Kenai. Indirect damage from fissuring and differential settling of foundation mterials in the vicinity of the Cordova airfield mused damage to a building, underground utilities, an airfield fill, and the highway. Minor amounts of direct and indirect damage from seismic vibrations were sustained by most of the communities situated on unconsolidated deposits as far east as Yakutat, north to Fairbanks, and west to King Salmon. Except for a few cracked or toppled chimney, all the damage from shaking was confined to areas of thick, unconsolidated deposits. Foundation damage was almost entirely restricted to water-saturated unconsolidated deposits which, when liquefied by seismic shaking, could spread laterally toward free faces and (or) settle differentially through compaction.

Alaska↗
USGS2007

Geologic Map of the Big Delta B-1 Quadrangle, East-Central Alaska

Geologic mapping and U-Pb age dating of rocks from the Big Delta B-1 quadrangle, east-central Alaska, have yielded new insights into the geology and gold mineral resource for the headwater region of the Goodpaster River, northeast of Delta, Alaska. The area lies within the Yukon-Tanana Upland and is underlain by Paleozoic and Cretaceous crystalline bedrock and contains several gold mines and prospects. The Paleozoic units include biotite gneiss, quartzite interlayered with metapelite, and amphibolite gneiss. The Paleozoic units were intruded during the Devonian by tonalitic to granitic plutons, which, as a result of regional Mesozoic metamorphism and tectonism, are now augen gneiss and biotite orthogneiss. The Mesozoic regional metamorphism and ductile deformation of the entire Yukon-Tanana Upland culminated by the Late Cretaceous (about 116 Ma) as a result of northwest-directed regional transpression along the southern margin of the North American craton. This dynamothermal episode was followed by invasion of syn- to post-tectonic granodioritic to granitic batholiths during the Late Cretaceous (about 113-107 Ma), followed by a pulse of 100-95 Ma quartz feldspar porphyry intrusions. Gold mineralization is spatially associated with various post-tectonic Late Cretaceous granitic dikes and batholiths throughout the quadrangle. A northeast-trending structural corridor, described herein as the Black Mountain tectonic zone, both controlled the emplacement of some of the Cretaceous intrusive rocks, gold deposits, and prospects, as well as formed a deep-seated crustal conduit along which a subsequent rhyolite flow-dome complex erupted during the Paleocene. Tertiary uplift and erosion resulted in the development of extensive erosional pediments. Quaternary alpine glaciation carved beautiful, broad valleys in the eastern part of the quadrangle, leaving behind terminal moraines in the headwater region of the Goodpaster river drainage. Continued Holocene to Recent deformation along the Black Mountain tectonic zone has offset Tertiary terraces, as well as Quaternary fluvial and alluvial deposits, indicating that the area has a long, complex, and ongoing tectonic history.

Scientific Investigations Map↗
USGS2014

Porphyry copper assessment of western Central Asia

The U.S. Geological Survey conducted an assessment of resources associated with porphyry copper deposits in the western Central Asia countries of Kyrgyzstan, Uzbekistan, Kazakhstan, and Tajikistan and the southern Urals of Kazakhstan and Russia as part of a global mineral resource assessment. The purpose of the study was to (1) delineate permissive areas (tracts) for undiscovered porphyry copper deposits; (2) compile a database of known porphyry copper deposits and significant prospects; (3) where data permit, estimate numbers of undiscovered deposits within those permissive tracts; and (4) provide probabilistic estimates the amounts of copper (Cu), molybdenum (Mo), gold (Au), and silver (Ag) that could be contained in those undiscovered deposits. Western Central Asia, a region diverse in its geologic complexity, is situated north of the Tarim and North China tectonic blocks and sandwiched between the East European and Siberian cratons. The Ural Mountains form the western margin of the region; the southern margin is formed by the high-standing ranges that make up the Tian Shan mountain range in the border regions of Kazakhstan, Kyrgyzstan, and western China, where the effects of collisional tectonics are well displayed. The tectonic collage that makes up the core of western Central Asia is perhaps the geologically least understood part of the region. There is broad agreement that the early Paleozoic is made up of tectonically juxtaposed blocks that vary from Precambrian-cored microcontinents to magmatic arc and related complexes to subduction-related accretionary complexes. The rudiments of an incipient, contiguous single Kazakhstan block were formed by the end of the Silurian. In the middle to late Paleozoic, the block was unconformably superposed by two large, nested magmatic-arc belts, one Devonian, the other Carboniferous. Both magmatic-arc complexes were folded into a horseshoe-shaped, southeast-opening orocline in response to the final collisions of the various surrounding cratonic blocks with the Kazakhstan block. Additional deformation in the upper Cenozoic derived from the collision of India and China significantly redistributed fragments of the various mosaicked blocks, particularly in the central and southern parts of the western Central Asian region. Porphyry copper deposits are associated with many of the magmatic-arc fragments and belts throughout the geologically complex region, and economically important deposits are found in arc sequences of all Paleozoic Periods. The economically most productive arcs are Carboniferous. The assessment includes a discussion of the tectonic and geologic setting of porphyry copper deposits in western Central Asia (chapter 1), an application of remote sensing data for hydrothermal alteration mapping as a tool for porphyry copper assessment in the region (chapter 2), and a probabilistic assessment of undiscovered porphyry copper resources in four areas that represent Ordovician and Late Paleozoic (Carboniferous-Permian) magmatic arcs (chapter 3). The principal litho-tectonic terrane concept used to delineate permissive tracts was that of a magmatic arc that formed in the subduction boundary zone above a subducting plate. Eight permissive tracts are delineated on the basis of mapped and inferred subsurface distributions of igneous rocks assigned to magmatic arcs of specified age ranges that define areas where the occurrence of porphyry copper deposits within 1 kilometer of the Earth’s surface is possible. These tracts range in area from about 8,000 to 200,000 square kilometers and host 18 known porphyry copper deposits that contain about 54 million metric tons of copper. Available data included geologic maps, the distribution of significant porphyry copper occurrences and potentially related deposit types, the distribution of hydrothermal alteration patterns that are consistent with porphyry copper mineralization, and information on possible subsurface extensions of permissive rocks. On the basis of analyses of these data, the assessment team estimated a mean of 25 undiscovered porphyry copper deposits for the study area. Estimates of numbers of undiscovered deposits were combined with grade and tonnage models in a Monte Carlo simulation to yield a mean estimate of 95 million metric tons of copper in undiscovered porphyry copper deposits; this represents about twice the amount of identified porphyry copper resources (54 million metric tons). Detailed descriptions of each permissive tract, including the rationales for delineation and assessment, are given in appendixes, along with a geographic information system (GIS) that includes permissive tract boundaries, point locations of known porphyry copper deposits and significant occurrences, and hydrothermal alteration data based on analysis of remote sensing data.

Ural Mountains↗