SEARCH · USGS Science

Results for “Environmental Science: Processes and Impacts”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,662 records · Page 56Linked to original sources

USGS1976

Geology and mineral deposits of the Needle Mountains District, Southwestern Colorado

The Needle Mountains district is set in highly fractured Precambrian granitic rocks that have intruded and metamorphosed older Precambrian metasedimentary rocks. The Precambrian rocks are overlain by outliers of Paleozoic strata and intruded by a late Tertiary stock. Past mineral production reportedly was limited to silver and gold ores presumably taken from small fissure veins. Although the economic potential of the district has not been adequately explored, some evidence indicates potential for base metal deposits.

Colorado↗

USGS2025

Three-dimensional seismic velocity models for the San Francisco Bay region, California from joint body-wave and surface-wave tomography validated by waveform simulation

A high-resolution seismic velocity model for both P and S waves is essential for the San Francisco Bay (SFB) region to accurately simulate earthquake ground motions and assess seismic hazards in this high-risk region. We present new three-dimensional P-wave and S-wave velocity (Vp and Vs) models of the SFB region developed using joint tomographic inversion with a rich set of earthquake and active-source body-wave data and ambient-noise surface-wave data. We designed a dynamic balance strategy to effectively balance the contributions of body-wave and surface-wave data during each iteration of the inversion. Owing to the complementary resolution of body-wave and surface-wave data, our new models are significantly improved compared to previous tomographic models. Major geologic features in the SFB region, including low-velocity basins, high-velocity Franciscan Complex, granite, and gabbro rocks, and across-fault velocity contrasts, are imaged in our Vp and Vs models. Compared to the geology-based U.S. Geological Survey velocity model, our new model has better defined structures for some important areas that are of great concern for seismic hazard assessment, such as the Sacramento-San Joaquin Delta, and the 2014 magnitude 6.0 South Napa earthquake area. We validated our model by simulating waveforms for a set of moderate-magnitude earthquakes. The good performance of our model in waveform simulation indicates its potential for improving ground motion simulation and seismic hazard assessment in the SFB region.

California↗

USGS2026

Evaluation of nutrient, alkalinity, and acid-neutralizing capacity stabilities in water samples analyzed by the U.S. Geological Survey National Water Quality Laboratory, 2023–24

The U.S. Geological Survey evaluated the stability of water-sample chemical analysis of nutrient, alkalinity, and acid-neutralizing capacity constituents with respect to the duration between sample collection and laboratory analysis, also known as the sample holding time. A study began in the spring of 2023 to evaluate the sample stability, between 2 and 180 days after sample collection, of the chemical properties and chemical constituents of alkalinity as calcium carbonate, filtered; acid-neutralizing capacity as calcium carbonate, unfiltered; total ammonia as nitrogen, filtered; total ammonia plus organic nitrogen as nitrogen, filtered and unfiltered; nitrite as nitrogen, filtered; nitrate plus nitrite as nitrogen, filtered; total nitrogen, filtered and unfiltered; orthophosphate as phosphorous, filtered; and total phosphorus as phosphorus (filtered and unfiltered) in water. Both surface water and groundwater matrices were represented. Sample instability varied by observed property and matrix; therefore, providing general guidance for sample holding time is not possible based on matrices alone. No correlations between field measurements of sample characteristics and sample instability were observed. Although observations for some properties indicate sample stability that exceeds the recognized U.S. Geological Survey National Water Quality Laboratory method holding times, this is not necessarily the case for matrices and seasonal characteristics that were not investigated. Based on the limited number of six sample sources used in this study, some patterns emerge for the 12 observed properties studied. Five observed properties generally indicate stability for as many as 180 days after sampling (total nitrogen as nitrogen, both filtered and unfiltered; orthophosphate as phosphorus, filtered; and phosphorus as phosphorus, both filtered and unfiltered). Other observed properties indicate stability for as many as 180 days for some matrices, but not for others. Finally, some observed properties indicate instability well before 180 days.

Scientific Investigations Report↗

USGS2026

Cajon Pass and the southern San Andreas Fault System: Earthquake cycle stress accumulation and present-day loading

With over a century since the last major rupture affecting the wider Los Angeles region, tectonic stress has steadily built along the southern San Andreas and San Jacinto fault systems, raising concerns of an imminent large earthquake. Cajon Pass, located at the junction of these faults, represents a critical site for potential through-going ruptures in Southern California. We constructed new 4D earthquake cycle simulations using a 1000-year paleoseismic rupture history of the San Andreas Fault System (SAFS) to assess spatial and temporal variations in stress. A semi-analytic Fourier transform model was used to compute stress from 3D dislocations in an elastic plate overlying a Maxwell viscoelastic half-space, assuming a complete coseismic reset of resolved shear stress on ruptured elements. Results show highest stress accumulation north of Cajon Pass (∼1.8 MPa/100 years) due to greater slip rates, and lower rates south of Cajon Pass (∼1.0–1.5 MPa/100 years). By 2025, Coulomb stress is estimated at 2.8 MPa on the Mojave South (MOS) segment, 1.8 MPa on the North San Bernardino (NSB1) segment and 3.6 MPa on the San Jacinto Bernardino (SJB) segment. Segments accumulate stresses with characteristic ranges of pre-event stress interpreted as failure thresholds: 1.2–2.7 MPa for MOS, 0.4–1.6 MPa for NSB1, and 1.2–2.9 MPa for SJB. When the stress disparity between segments SJB and MOS narrows, the faults appear to rupture jointly, suggesting that stress levels may control how Cajon Pass acts as an earthquake gate. These results may inform seismic hazard assessments by linking stress evolution to fault interactions.

California↗

USGS2024

A history of cryohydrogeology modeling and recent advancements through the integration of solute transport

Groundwater flow systems and permafrost are interrelated because permafrost thaw enhances permeability, while groundwater flow can advect heat and accelerate permafrost thaw (McKenzie et al. 2021). Given amplified climate change in cold regions, there is renewed interest in ‘cryohydrogeology’, the study of groundwater in cold regions. Many data-driven studies have shown that permafrost thaw is leading to activated aquifers and increased baseflow across the pan-Arctic region (e.g. Walvoord and Striegl 2007, Evans et al. 2020). Empirical evidence of a subsurface ‘replumbing’ (Walvoord and Kurylyk 2016) in permafrost regions raises questions about the fate of sequestered contaminants in the North (Langer et al. 2023). We will discuss the history of and emerging opportunities in cryohydrogeological modeling, with a focus on recent contaminant transport modeling.

Conference Paper↗

USGS2024

Surficial geology and Quaternary fault map of the Las Vegas Valley, Clark County, Nevada

The Surficial Geology and Quaternary Fault Map of the Las Vegas Valley, Clark County, Nevada is a 1:50,000-scale compilation of published 1:24,000-scale geologic maps integrated with new field and desktop mapping. This geologic map compilation and GIS database are part of a broader study on the Quaternary faults in the Las Vegas Valley, the results of which are summarized in this report. The map compilation utilized a variety of digital base maps to evaluate the characteristics of surficial deposits and Quaternary fault scarps including lidar data in undeveloped parts of the valley and orthorectified historical aerial photos in the urbanized center of the valley. The map distinguishes twenty surficial map units including alluvial-fan and ephemeral-wash deposits, groundwater discharge deposits of the Las Vegas Formation, and alluvium deposits of Las Vegas Wash. Quaternary faults include the Quaternary Las Vegas Valley fault system in the center of the valley and the Frenchman Mountain fault system along the eastern margin. All Quaternary fault traces in the valley were evaluated, and the previously published fault mapping was modified as needed. The new mapping and uniform correlation of surficial deposits displaced by Quaternary faults yields a consistent valley-wide characterization of the recency of fault activity. The map and GIS database include a Quaternary geochronology compilation of 119 previously published surficial deposit ages of various types, 35 new luminescence ages, and 3 new radiocarbon ages. The new age data further bracket the ages of the Las Vegas basin Quaternary stratigraphy and provide new constraints on the timing of Quaternary fault activity.

Nevada↗

USGS2024

Subduction zone geometry modulates the megathrust earthquake cycle: Magnitude, recurrence, and variability

Megathrust geometric properties exhibit some of the strongest correlations with maximum earthquake magnitude in global surveys of large subduction zone earthquakes, but the mechanisms through which fault geometry influences subduction earthquake cycle dynamics remain unresolved. Here, we develop 39 models of sequences of earthquakes and aseismic slip (SEAS) on variably-dipping planar and variably-curved nonplanar megathrusts using the volumetric, high-order accurate code tandem to account for fault curvature. We vary the dip, downdip curvature and width of the seismogenic zone to examine how slab geometry mechanically influences megathrust seismic cycles, including the size, variability, and interevent timing of earthquakes. Dip and curvature control characteristic slip styles primarily through their influence on seismogenic zone width: wider seismogenic zones allow shallowly-dipping megathrusts to host larger earthquakes than steeply-dipping ones. Under elevated pore pressure and less strongly velocity-weakening friction, all modeled fault geometries host uniform periodic ruptures. In contrast, shallowly-dipping and sharply-curved megathrusts host multi-period supercycles of slow-to-fast, small-to-large slip events under higher effective stresses and more strongly velocity-weakening friction. We discuss how subduction zones' maximum earthquake magnitudes may be primarily controlled by the dip and dimensions of the seismogenic zone, while second-order effects from structurally-derived mechanical heterogeneity modulate the recurrence frequency and timing of these events. Our results suggest that enhanced co- and interseismic strength and stress variability along the megathrust, such as induced near areas of high or heterogeneous fault curvature, limits how frequently large ruptures occur and may explain curved faults' tendency to host more frequent, smaller earthquakes than flat faults.

Journal of Geophysical Research: Solid Earth↗

USGS2025

Measurement of in situ-produced cosmogenic nuclides in fine-grained quartz from shale

In situ -produced 10 Be in quartz is widely used to constrain exposure ages and denudation rates, traditionally measured in sand-sized grains. Here we report a new method for isolating fine-grained quartz from shale and demonstrate its reliability for grain sizes down to single microns. Sequential dissolution tests and analyses of grain size separates show that meteoric 10 Be is eliminated and that recoil losses during cosmogenic nuclide production are balanced by implantation from other mineral grains. High-temperature combustion leads to diffusion of meteoric 10 Be into fine-grained quartz and must be used with caution.

Nuclear Instruments and Methods in Physics Researc↗

USGS2024

Temperature

The “National Field Manual for the Collection of Water-Quality Data” (NFM) provides guidelines and procedures for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation’s surface-water and groundwater resources. This chapter, NFM A6.1, provides guidance and protocols for the measurement of temperature of air, of a surface-water body or in groundwater, which include the scientific basis of the measurement, selection and maintenance of equipment, calibration verification, troubleshooting, and procedures for measurement and reporting. It updates and supersedes USGS Techniques of Water-Resources Investigations, book 9, chapter A6.1, version 2.0, by Franceska D. Wilde. Temperature of air and water is routinely measured when water samples are collected, is often measured continually at USGS streamgages, and is a parameter regularly measured during laboratory and field experiments. The field method for measuring temperature described in this chapter is applicable to air and most natural waters. Before 2017, the NFM chapters were released in the USGS Techniques of Water-Resources Investigations series. Effective in 2018, new and revised NFM chapters are being released in the USGS Techniques and Methods series; this series change does not affect the content and format of the NFM. More information is in the general introduction to the NFM (USGS Techniques and Methods, book 9, chapter A0) at https://doi.org/10.3133/tm9A0 . The authoritative current versions of NFM chapters are available in the USGS Publications Warehouse at https://pubs.usgs.gov/ . Comments, questions, and suggestions related to the NFM can be addressed to nfm@usgs.gov .

Techniques and Methods↗

USGS2024

Geophysical characterization of an alkaline‑carbonatite complex using gravity and magnetic methods at Magnet Cove, Arkansas, USA

The Magnet Cove alkaline‑carbonatite complex (MCC), located in the Ouachita Mountains of south-central Arkansas in the United States, hosts an extensive variety of rare rock types and critical mineral resources with physical properties (density and magnetization) that contrast significantly with the sedimentary rocks into which they have intruded. Newly acquired ground-based gravity and magnetic data were used to develop two-dimensional and three-dimensional geophysical models of the Cretaceous-aged Magnet Cove intrusive complex. The models reveal that the MCC: (1) widens out at middle crustal depths to as much 22 km across, and may reach a depth of 20 km; (2) has a total volume (exposed and subsurface) that may be over 800 km 3 ; (3) is likely connected at depth to other intrusions in the Arkansas alkaline province; and (4) has a geometry that is aligned with pre-existing structures such as the Reelfoot rift and the Ouachita orogenic belt, some of which were likely structurally controlled by the Precambrian crystalline basement and the continent-ocean transition zone buried beneath the Ouachita orogen. For the first time, the magnetic models of the MCC account for the presence of strong remanent magnetization. This results in a geophysical workflow necessary to accurately interpret magnetic anomalies over the much larger Arkansas alkaline province, its geologic and structural framework, and critical mineral potential.

Arkansas↗

USGS2024

Cold blood in warming waters: Effects of air temperature, precipitation, and groundwater on Gulf Sturgeon thermal habitats in a changing climate

Objective In a changing climate, the effects of air temperature, precipitation, and groundwater on water temperature and thermal habitat suitability for Gulf Sturgeon Acipenser desotoi , listed as threatened under the U.S. Endangered Species Act, are not well understood. Hence, we incorporated these factors into thermal habitat models to forecast how Gulf Sturgeon may be affected by wide‐ranging climate change scenarios in 2024–2074. Methods Using data from the Choctawhatchee River, Florida, we developed precipitation‐ and groundwater‐corrected air–water temperature models, compared their accuracy with that of conventional air–water temperature models used in fisheries management, and projected future Gulf Sturgeon thermal habitat suitability for normal physiological functioning and fieldwork (i.e., population sampling and telemetry surgeries) in summer (May–August) under 16 climate change scenarios. Result Precipitation‐ and groundwater‐corrected models were more accurate than conventional air–water temperature models (mean improvement in adjusted R 2 = +0.45; range = +0.09 to +0.75). Water temperature was projected to warm at widely variable rates across climate change scenarios encompassing different air temperature, precipitation, and groundwater regimes. Importantly, Gulf Sturgeon summer aggregation areas were cooler and influenced more by precipitation and groundwater and less by air temperature than were non‐aggregation areas. If precipitation and groundwater—as drivers of cooling—become warm in a changing climate, summer aggregation areas were projected to exhibit thermal habitat degradation equivalent to or greater than that of non‐aggregation areas. Conclusion Our results add hydrological context to the premise that aggregation areas provide cool water and energetic savings for Gulf Sturgeon during summer, underscoring the importance of protecting these habitats through groundwater conservation, water quality monitoring, and riparian/watershed habitat management. Our findings indicate that identifying thermally appropriate times for fieldwork activities will be increasingly important and time‐restricted as climate change intensifies. However, our research provides managers with a portfolio of water temperature models and an accurate, cost‐effective, management‐relevant approach to forecasting thermal habitat conditions for Gulf Sturgeon and other species in a changing climate.

Alabama, Florida↗

USGS2025

Hydrogeologic characterization of the Cahuilla Valley and Terwilliger Valley Groundwater Basins, Riverside County, California

The relation between the groundwater and the amount of natural recharge to the Cahuilla Valley and Terwilliger Valley groundwater basins is not well understood. During the 20th century, the reliance on groundwater near Anza, California, used for agricultural, domestic, and municipal reasons has increased, and there is the potential for changes in groundwater availability related to climate change. Several types of existing data were evaluated, and new data were collected for this study, with the goal of characterizing the region’s hydrogeology. The study’s scope included constructing a geologic framework model to show where the groundwater-bearing units are present and their relation to each other, estimating the major components of the groundwater budget, and understanding local short-term and regional long-term groundwater flow and how that has changed since the early 1900s. Two electrical resistivity tomography surveys were done in the Durasno Valley about 2,150 feet apart to identify the thickness of the alluvium, its horizontal extent, and the depth-to-basement along two profiles perpendicular to Cahuilla Creek. The subsurface sediments were mostly horizontally layered and the transitional boundary between the alluvium and basement was thinner and shallower along the upgradient profile where the depth-to-basement was about 70 feet below land surface; the depth-to-basement at the downgradient profile was more than about 140 feet below land surface. The results from the surveys were used to place four monitoring wells at two sites along the survey profiles. Artesian flow from the deepest well at the downgradient site indicated that the decomposed and competent basement likely contributed some groundwater to the overlying alluvium, laterally, from below, or both. A digital three-dimensional geologic framework model was constructed using EarthVision software to represent the subsurface geometry of the alluvium, decomposed basement, and competent basement. Maps and cross sections of the modeled thicknesses of the alluvium and decomposed basement, and the modeled elevation of the top of the competent basement, were made to show the subsurface geometry of vertical faults, selected wells, and the groundwater-bearing units. Because natural recharge is related to the variable cycles of precipitation, estimates are difficult to quantify. Recharge and runoff have extreme interannual variability in the study area; recharge and runoff can be sporadic, and a substantive amount may not occur in some years. Estimates of recharge from a previous study and the regional-scale Basin Characterization Model for California for four different periods ranged from 3,800 acre-feet/year for 1897–1947 to 5,900 acre-feet/year for 1971–2000. Potential recharge from the disposal of domestic septic systems may have been as much as 500 acre-feet in 2020. It was estimated that between about 400 and 2,400 acre-feet/year of groundwater is lost through evapotranspiration by vegetation and evaporation from open water bodies, but the main source of discharge is through pumpage, mainly used for agriculture from the alluvium in the Cahuilla Valley and Terwilliger Valley groundwater basins. The estimated total pumpage for 1991–2021 ranged from about 1,140 acre-feet in 2019 to about 3,450 acre-feet in 1994. When summed, the cumulative amount of estimated pumpage between 1991 and 2021 was about 81,400 acre-feet. The general direction of groundwater flow is from the northeast along the San Jacinto fault zone at the headwaters of Cahuilla and Hamilton Creeks, to the surface-water outlets at the west and southeast parts of the study area. Groundwater-level data from the 1950s and earlier indicate that there was a natural groundwater divide between the Cahuilla Valley and Terwilliger Valley groundwater basins, but the changing magnitude and extent of the groundwater depressions caused by pumping since about 1950 indicate that the location of the natural groundwater boundary between the Cahuilla Valley and Terwilliger Valley groundwater basins has migrated over time. Flow from the upper to the lower parts of the Cahuilla Valley groundwater basin roughly follows the course of Cahuilla Creek through the narrow Durasno Valley where an estimated volume of flow in April 2019 was about 10–150 acre-feet/year. Short-term trends in groundwater levels, particularly in wells where groundwater is shallow and in the basement unit, show how some areas respond quickly to recharge and discharge. Wells located further to the east within the Cahuilla Valley groundwater basin in the alluvium show much less of a response to recharge events; areas of sustained pumpage from the alluvium, primarily for agriculture, show long-term declines in groundwater levels and generally do not show the effects of storm events or recent runoff. Groundwater levels in wells that are farthest from where most of the recharge occurs and where pumping has been the greatest, had some of the largest long-term groundwater-level declines at a rate of about 0.8 foot/year between 1971 and 2021.

California↗

USGS2026

Groundwater spatial variability within an atoll island: Assessing shallow aquifer heterogeneity with geophysical and physicochemical measurements

This study examines the spatial variability of shallow groundwater on Dhigelaabadhoo Island using electromagnetic induction surveys, groundwater monitoring, and sediment analyses. The research reveals how variations in island morphology—such as differences in elevation, reef flat width, and sediment composition—affect the spatial distribution of groundwater lenses and the overall aquifer dynamics. Saltwater intrusion is especially pronounced in low elevated areas, with narrow reef flat plate and areas where higher hydraulic conductivity—driven by the presence of coarser sediments—is observed, whereas regions characterized by finer sediments, higher elevation, and wider reef flat plates tend to support more symmetric and less saline groundwater lenses. The geophysical investigations reveal that tidal oscillations alter groundwater movement by markedly changing water levels and conductivity, thereby underscoring the critical need to account for temporal dynamics in atoll coastal aquifer systems and the importance of integrating tidal dynamics into the aquifer zone. The findings highlight the significant role of intrinsic morphological and external hydrodynamic factors in shaping groundwater distribution on atoll islands, offering critical insights for sustainable freshwater resource management.

Dhigelaabadhoo Island↗

USGS2022

New Hampshire and Landsat

At its widest point, a mere 80 miles separate the eastern and western borders of New Hampshire. Its northern and southern borders are just 175 miles apart. Even so, few States can boast as much rugged natural beauty per mile as the Nation’s fifth smallest. Nestled within New Hampshire are 93 State parks teeming with moose, Ursus americanus (Pallas, 1780; black bears), coyotes, beavers, river otters, and foxes. The largest section of White Mountain National Forest cuts across north-central New Hampshire, drawing visitors to its lakes, streams, mountain peaks, and hardwood forests. New Hampshire also is home to Lake Winnipesaukee, the State’s largest lake, notable for its floating post offices, the annual “ice-out” contest that sees residents vying to guess the date its surface ice dissipates, and its supporting role in films such as “On Golden Pond” and “What About Bob?” However, the scenic forests of New Hampshire face challenges in the form of invasive species such as Lymantria dispar (Linnaeus, 1758; spongy moth), Adelges piceae (balsam woolly adelgid), and Agrilus planipennis (emerald ash borer). In recent years, New Hampshire’s lakes and streams have seen more cyanobacterial blooms as well. The U.S. Geological Survey Landsat Program offers a consistent, reliable, and historically unmatched source of Earth observations that can aid in the mapping, monitoring, and management of New Hampshire’s land and water resources. Here are a few ways Landsat data have been used in the Granite State.

New Hampshire↗

USGS2024

Using geologic mapping to understand temporal and spatial relations of closely clustered to concurrent latest Holocene surface ruptures on two intersecting faults, south-central Mojave Desert, California

The Pinto Mountain Fault Zone (PMFZ) marks a major structural boundary between east-oriented sinistral faults of the eastern Transverse Ranges (to the south) and northwest-oriented dextral faults of the south-central Mojave Desert (to the north). These structural fault systems comprise sinistral and dextral deformational domains of the Eastern California Shear Zone (ECSZ) that intersect one another in the Copper Mountain and Twentynine Palms areas. The U.S. Geological Survey (USGS) is conducting detailed geologic mapping and geochronologic investigations designed to clarify geometric, kinematic, and temporal relations among the two domains, that are focused on the central portion of the left-lateral PMFZ near its intersection with the right-lateral Copper Mountain Fault (CMF) and Mesquite Lake Fault Zone (MLFZ).

California↗

USGS2026

Alternative approaches to dryland reclamation enhance vegetation cover and soil stability at a former uranium mine

Introduction Conventional reclamation methods to recover dryland ecosystems after mineral extraction often have low success. Alternative reclamation techniques may help overcome the many challenges to establishing persistent native vegetation and stable soils. Objectives Compare conventional reclamation approaches that focus primarily on soil stabilization to alternative approaches that may improve native ecosystem restoration at the Kanab North Mine in northern Arizona. Methods In a fully crossed experiment, conventional seed mix (native and non-native species) and seeding methods (drill-seeding) were compared to alternative practices, including a native-only seed mix, connectivity modifiers (ConMods) with hand seeding, and a biocrust inoculation. Restoration metrics like plant establishment, species composition, soil surface cover and stability, biocrust establishment, and near-surface wind-driven sediment were monitored over the first 5 years post-reclamation. Results While all restoration metrics improved with time, compared to traditional methods, ConMods increased total, graminoid, and native plant species cover, and the native-only seed mix increased woody, native, and perennial species cover. Biocrust inoculation increased late-successional biocrust development, but biocrusts only persisted over 5 years in combination with ConMods. Soil stability increased in all treatments, but both ConMods and biocrust inoculation increased stability compared to traditional practices. Conclusion Overall, alternative approaches to reclamation tested here (ConMods, native seed, and biocrust inoculation) were more effective than traditional practices at increasing total plant cover, facilitating biocrust establishment, and promoting soil stability after uranium mine reclamation.

Arizona↗

USGS2025

Nodal seismic deployment on Mauna Loa volcano, Hawaii: Dataset and preliminary insights

Mauna Loa is the largest active volcano on Earth, comprising ∼51% of the Island of Hawai‘i’s landmass and posing significant risks to the island’s communities, infrastructure, and natural environment. Historical eruptions have produced lava flows that have reached the ocean in as little as 3 hr. The timing and location of such lava flows in the past 200 yr underscore how critical determination of the location and geometry of magma storage and structure is for volcanic hazard assessment and eruption forecasting. Now, after nearly 38 yr of volcanic quiescence, Mauna Loa has erupted again. On 27 November 2022, fissures initiated within the summit caldera and then migrated to the northeast rift zone, where they generated a large lava flow that threatened a major highway. To improve our understanding of the geometry of this magma system, we deployed a temporary nodal array on Mauna Loa in the summer of 2024. This increased our seismic coverage sufficiently to image this magmatic system. This nodal array consists of 33 seismometers distributed on and around the volcano and was deployed for over three months to record seismic signals. The primary objective of this project is to resolve the high‐resolution seismic velocity structure and characterize seismic features associated with magma storage and ascent pathways. In this article, we present an overview of the deployment, evaluate the quality of the data, and show example recordings to evaluate the suitability of the data set for future seismic investigations, including earthquake relocation, seismic tomography, and receiver function analysis. Comparisons with nearby permanent broadband and short‐period seismic stations demonstrate that the nodal array recorded high‐quality waveforms, making it a valuable resource for constraining the magmatic system beneath Mauna Loa at multiple scales.

Hawaii↗

USGS2025

Methodology for compilation of previously published contour data showing the altitude of the base of Dakota Sandstone on the Colorado Plateau, Arizona, Colorado, New Mexico, and Utah

Structure contours and other geologic information from numerous published geologic maps were digitized and compiled into a digital dataset showing the configuration of a single stratigraphic datum, the base of the Dakota Sandstone and its equivalents across the Colorado Plateau. The principal maps compiled in digital form are a series of 1:250,000-scale 1 degree (°) × 2° quadrangle maps published by the U.S. Geological Survey, augmented by other geologic maps published at various map scales. The compiled digital dataset contains geologic map polygons of the Dakota Sandstone and regional stratigraphic equivalents, the location of faults and fold axes, structure contour lines that define the altitude of the base of the unit and bedding orientation data computed from the structure contour lines. This report provides the scientific rationale for compilation of these data and describes the compilation methodology for each of the data elements. This report provides an extended description of the data compilation in a companion U.S. Geological Survey digital data release of spatial data and attributes associated with the contoured surface and associated geologic data layers.

Arizona, Colorado, New Mexico, Utah↗