USGS Science⌕ Search

SEARCH · USGS Science

Results for “Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56Linked to original sources
USGS1996

Establishing the moon as a spectral radiance standard

A new automated observatory dedicated to the radiometry of the moon has been constructed to provide new radiance information for calibration of earth-orbiting imaging instruments, particularly Earth Observing System instruments. Instrumentation includes an imaging photometer with 4.5-in. resolution on a fully digital mount and a full-aperture radiance calibration source. Interference filters within 0.35–0.95 µm correspond to standard stellar magnitude systems, accommodate wavelengths of lunar spectral contrast, and approximate some band-passes of planned earth-orbiting instruments (ASTER, Landsat-7 ETM, MISR, MODIS, and SeaWIFS). The same equipment is used for lunar and stellar observations, with the use of an aperture stop in lunar imaging to comply with Nyquist's theorem and lengthen exposure times to avoid scintillation effects. A typical robotic night run involves observation of about 60 photometric standard stars and the moon; about 10 of the standard stars are observed repeatedly to determine atmospheric extinction, and the moon is observed several times. Observations are to be made on every photometric night during the bright half of the month for at least 4.5 years to adequately cover phase and libration variation. Each lunar image is reduced to absolute exoatmospheric radiance and reprojected to a fixed selenographic grid system. The collection of these images at various liberators and phase angles will be reduced to photometric models for each of the approximately 120 000 points in the lunar grid for each filter. Radiance models of the moon can then be produced for the precise geometry of an orbiting instrument observation. Expected errors are under 1% relative and 2.5% absolute. A second telescope operating from 1.0 to 2.5 µm is planned.

Journal of Atmospheric and Oceanic Technology↗
USGS1999

Estimation of near-surface shear-wave velocity by inversion of Rayleigh waves

The shear‐wave ( S -wave) velocity of near‐surface materials (soil, rocks, pavement) and its effect on seismic‐wave propagation are of fundamental interest in many groundwater, engineering, and environmental studies. Rayleigh‐wave phase velocity of a layered‐earth model is a function of frequency and four groups of earth properties: P -wave velocity, S -wave velocity, density, and thickness of layers. Analysis of the Jacobian matrix provides a measure of dispersion‐curve sensitivity to earth properties. S -wave velocities are the dominant influence on a dispersion curve in a high‐frequency range (>5 Hz) followed by layer thickness. An iterative solution technique to the weighted equation proved very effective in the high‐frequency range when using the Levenberg‐Marquardt and singular‐value decomposition techniques. Convergence of the weighted solution is guaranteed through selection of the damping factor using the Levenberg‐Marquardt method. Synthetic examples demonstrated calculation efficiency and stability of inverse procedures. We verify our method using borehole S -wave velocity measurements.

Geophysics↗
USGS2024

A global view of remote sensing of rangelands: Evolution, applications, future pathways

The application of digital remote sensing to rangelands is as long as the history of digital remote sensing itself. Before the launch of the Earth Resources Technology Satellite (ERTS) – later renamed Landsat, scientists were evaluating the use of multispectral aerial imagery to map soils and range vegetation (Yost and Wenderoth 1969). During the late 1960’s, the promise of ERTS, designed to drastically improve our ability to update maps and study earth resources, particularly in developing countries, was eagerly anticipated by a number of government agencies (Carter 1969). With the ERTS launch on July 23, 1972, a flurry of research activity aimed at the application of this new data source to map earth resources began. Practitioners who pioneered the use of satellite based digital remote sensing found the new data source a significant value for rangeland assessments (e.g., Rouse et al., 1973, Rouse et al., 1974, Bauer 1976). This early work established many of the basic techniques still in use today to assess and monitor global rangelands. The following sub-sections discuss the evolution of remote sensing data, methods, and approaches in various decades.

Book chapter↗
USGS2012

The macroecology of sustainability

The discipline of sustainability science has emerged in response to concerns of natural and social scientists, policymakers, and lay people about whether the Earth can continue to support human population growth and economic prosperity. Yet, sustainability science has developed largely independently from and with little reference to key ecological principles that govern life on Earth. A macroecological perspective highlights three principles that should be integral to sustainability science: 1) physical conservation laws govern the flows of energy and materials between human systems and the environment, 2) smaller systems are connected by these flows to larger systems in which they are embedded, and 3) global constraints ultimately limit flows at smaller scales. Over the past few decades, decreasing per capita rates of consumption of petroleum, phosphate, agricultural land, fresh water, fish, and wood indicate that the growing human population has surpassed the capacity of the Earth to supply enough of these essential resources to sustain even the current population and level of socioeconomic development.

PLoS Biology↗
USGS1969

Heat flow in the Arctic

Defines heat flow as the flux at the earth's solid surface of heat conducted from the interior; the heat-flow-unit (hfu) is on the order of 1-millionth calorie through each sq cm of the surface/sec, which is enough to melt a 4-mm layer of ice over the earth's surface/yr. Earth heat originates from radioactive decay of U, Th and K in the crust and mantle. Although land heat-flow measurements in the Arctic are too few for regional interpretation, those from Cape Thompson, Barrow and Cape Simpson, Northern Alaska are discussed and figured to show what they contribute to understanding of permafrost, climatic change and shoreline movements. Measuring thermal conductivity and gradient is much simpler in ocean basins than on land. Locations of such measurements are mapped, the results for the Alaskan quadrant in more detail. The sharp change in heat flow at the edge of the Alpha Cordillera, shown in a geothermal model, suggests that this feature is a huge accumulation of basalt, rather than mantle material or remnant of a foundering continent as previously postulated. Future Arctic heat flow studies are discussed.

Arctic↗
USGS2000

A geometricla error in some Computer Programs based on the Aki-Christofferson-Husebye (ACH) Method of Teleseismic Tomography

Some computer programs based on the Aki-Christofferson-Husebye (ACH) method of teleseismic tomography contain an error caused by identifying local grid directions with azimuths on the spherical Earth. This error, which is most severe in high latitudes, introduces systematic errors into computed ray paths and distorts inferred Earth models. It is best dealt with by explicity correcting for the difference between true and grid directions. Methods for computing these directions are presented in this article and are likely to be useful in many other kinds of regional geophysical studies that use Cartesian coordinates and flat-earth approximations.

Bulletin of the Seismological Society of America↗
USGS2021

lsforce: A Python-based single-force seismic inversion framework for massive landslides

We present an open‐source Python package, lsforce, for performing single‐force source inversions of long‐period (tens to hundreds of seconds) seismic signals. Although the software is designed primarily for landslides, it can be used for any single‐force seismic source. The package allows users to produce estimates of the three‐component time series of forces exerted on the Earth by a landslide with postprocessing options to estimate the trajectory of its center of mass. Green’s functions for a user‐selected 1D Earth model are obtained automatically from the Incorporated Research Institutions for Seismology Synthetics Engine webservice or can be computed for custom 1D Earth models using Computer Programs in Seismology. lsforce implements the two most commonly used source parameterizations: a fully flexible, high‐resolution approach and a more stable but lower‐resolution method of overlapping triangle sources. Regularization options include a blended zeroth‐, first‐, and second‐order semiautomated Tikhonov regularization scheme, as well as additional optional constraints on start times, end times, and on the sum of forces. Uncertainty due to data selection can be assessed using either a leave‐one‐out approach or a modified jackknife technique that randomly excludes subsets of the data for multiple re‐inversions. Numerous built‐in plotting methods allow for easy quality control and assessment of results. In this article, we briefly outline the theory and methodology, describe our implementation, and demonstrate the usage of lsforce using the well‐studied 28 June 2016 Lamplugh rock avalanche in Alaska. Despite the rapidly increasing prevalence of landslide single‐force inversions in the landslide and seismology literature over the past decade, to our knowledge this is the first open‐source code for performing such inversions.

Seismological Research Letters↗
USGS2021

An evaluation of the timing accuracy of global and regional seismic stations and networks

Clock accuracy is a basic parameter of any seismic station and has become increasingly important for seismology as the community seeks to refine structures and dynamic processes of the Earth. In this study, we measure the arrival time differences of moderate repeating earthquakes with magnitude 5.0–5.9 in the time range of 1991–2017 at the same seismic stations by cross‐correlating their highly similar waveforms and thereby identify potential timing errors from the outliers of the measurements. The method has very high precision of about 10 ms and shows great potential to be used for routine inspection of the timing accuracy of historical and future digital seismic data. Here, we report 5131 probable cases of timing errors from 451 global and regional stations available from the Incorporated Research Institutions for Seismology Data Management Center, ranging from several tens of milliseconds to over 10 s. Clock accuracy seems to be a prevailing problem in permanent stations with long‐running histories. Although most of the timing errors have already been tagged with low timing quality, there are quite a few exceptions, which call for greater attention from network operators and the seismological community. In addition, seismic studies, especially those on temporal changes of the Earth’s media from absolute arrival times, should be careful to avoid misinterpreting timing errors as temporal changes, which is indeed a problem in some previous studies of the Earth’s inner core boundary.

Seismological Research Letters↗
USGS2025

Revisiting seismological discoveries of the inner core

Seismology has been used as a tool for understanding the current physical properties of the interior of the Earth and its dynamic evolution with remarkable success over the last century. Much of this progress is due to the ever‐expanding set of high‐quality quantitative observations of teleseismic waveforms recorded at seismographic stations worldwide. In this work, we revisit historical seismological studies that helped first identify a core distinct in physical properties from the overlying mantle, followed by the detection of an inner core that was eventually verified to be solid based on normal‐mode eigenperiods. Along with a brief overview of past studies of the Earth’s inner core, we examine the reproducibility of these results and discuss how historical data compare against modern observations. After accounting for past normal‐mode misidentifications, we confirm that introducing a solid inner core is required to afford significant improvements in fits to both radial modes and core‐sensitive spheroidal overtones. Strong shear dissipation in the inner core of the radial reference Earth model, REM1D ( ⁠⁠ Q u = 89.54 ), fits the reference datasets of both normal‐mode eigenperiods and quality factors accounting for physical dispersion. Because a liquid region would only have bulk dissipation, a narrow range of low Q u values that are preferred by the reference datasets affords additional evidence of a solid inner core. In addition, we find that there is little systematic bias in the timing accuracy of historical data, although large variances exist. Investigations into the temperature, composition, and evolution of the inner core, as well as the reproducibility of past studies, can benefit from the reconciliation of historical and modern seismological datasets.

Seismological Research Letters↗
USGS2022

Improved resolution across the Global Seismographic Network: A new era in low-frequency seismology

The Global Seismographic Network (GSN)—a global network of ≈150 very broadband stations—is used by researchers to study the free oscillations of the Earth (≈0.3–10 mHz) following large earthquakes. Normal‐mode observations can provide information about the radial density and anisotropic velocity structure of the Earth (including near the core–mantle boundary), but only when signal‐to‐noise ratios at very low frequencies are sufficiently high. Most normal‐mode observations in the past three decades have been made using Streckeisen STS‐1 vault seismometers. However, these sensors are no longer being manufactured or serviced. Candidate replacement sensors, the Streckeisen STS‐6 and the Nanometrics T‐360GSN, have been recently installed in boreholes, postholes, and vaults at several GSN stations and GSN testbeds. In this study, we examine normal‐mode spectra following three M w "> M w 8 earthquakes in 2021 and from one M w "> M w 8.2 earthquake in 2014 to evaluate the change in GSN low‐frequency performance on the vertical component. From this analysis, we conclude that the number of GSN stations capable of resolving normal modes following M w "> M w 8 earthquakes has nearly doubled since 2014. The improved observational capabilities will help better understand the radial velocity and density estimates of the Earth.

The Seismic Record↗
USGS1998

The seismic response of the Los Angeles basin, California

Using strong-motion data recorded in the Los Angeles region from the 1992 ( M w 7.3) Landers earthquake, we have tested the accuracy of existing three-dimensional (3D) velocity models on the simulation of long-period (≧2 sec) ground motions in the Los Angeles basin and surrounding San Fernando and San Gabriel Valleys. First, the overall pattern and degree of long-period excitation of the basins were identified in the observations. Within the Los Angeles basin, the recorded amplitudes are about three to four times larger than at sites outside the basins; amplitudes within the San Fernando and San Gabriel Valleys are nearly a factor of 3 greater than surrounding bedrock sites. Then, using a 3D finite-difference numerical modeling approach, we analyzed how variations in 3D earth structure affect simulated waveforms, amplitudes, and the fit to the observed patterns of amplification. Significant differences exist in the 3D velocity models of southern California that we tested (Magistrale et al. , 1996; Graves, 1996a; Hauksson and Haase, 1997). Major differences in the models include the velocity of the assumed background models; the depth of the Los Angeles basin; and the depth, location, and geometry of smaller basins. The largest disparities in the response of the models are seen for the San Fernando Valley and the deepest portion of the Los Angeles basin. These arise in large part from variations in the structure of the basins, particularly the effective depth extent, which is mainly due to alternative assumptions about the nature of the basin sediment fill. The general ground-motion characteristics are matched by the 3D model simulations, validating the use of 3D modeling with geologically based velocity-structure models. However, significant shortcomings exist in the overall patterns of amplification and the duration of the long-period response. The successes and limitations of the models for reproducing the recorded ground motions as discussed provide the basis and direction for necessary improvements to earth structure models, whether geologically or tomographically derived. The differences in the response of the earth models tested also translate to variable success in the ability to successfully model the data and add uncertainty to estimates of the basin response given input “scenario” earthquake source models.

California↗
USGS2012

SHRIMP U-Pb ages of xenotime and monazite from the Spar Lake red bed-associated Cu-Ag deposit, western Montana: Implications for ore genesis

Xenotime occurs as epitaxial overgrowths on detrital zircons in the Mesoproterozoic Revett Formation (Belt Supergroup) at the Spar Lake red bed-associated Cu-Ag deposit, western Montana. The deposit formed during diagenesis of Revett strata, where oxidizing metal-bearing hydrothermal fluids encountered a reducing zone. Samples for geochronology were collected from several mineral zones. Xenotime overgrowths (1–30 μm wide) were found in polished thin sections from five ore and near-ore zones (chalcocite-chlorite, bornite-calcite, galena-calcite, chalcopyrite-ankerite, and pyrite-calcite), but not in more distant zones across the region. Thirty-two in situ SHRIMP U-Pb analyses on xenotime overgrowths yield a weighted average of 207 Pb/ 206 Pb ages of 1409 ± 8 Ma, interpreted as the time of mineralization. This age is about 40 to 60 m.y. after deposition of the Revett Formation. Six other xenotime overgrowths formed during a younger event at 1304 ± 19 Ma. Several isolated grains of xenotime have 207 Pb/ 206 Pb ages in the range of 1.67 to 1.51 Ga, and thus are considered detrital in origin. Trace element data can distinguish Spar Lake xenotimes of different origins. Based on in situ SHRIMP analysis, detrital xenotime has heavy rare earth elements-enriched patterns similar to those of igneous xenotime, whereas xenotime overgrowths of inferred hydrothermal origin have hump-shaped (i.e., middle rare earth elements-enriched) patterns. The two ages of hydrothermal xenotime can be distinguished by slightly different rare earth elements patterns. In addition, 1409 Ma xenotime overgrowths have higher Eu and Gd contents than the 1304 Ma overgrowths. Most xenotime overgrowths from the Spar Lake deposit have elevated As concentrations, further suggesting a genetic relationship between the xenotime formation and Cu-Ag mineralization.

Montana↗
USGS1986

Spectral reflectance of carbonatites and related alkalic igneous rocks: Selected samples from four North American localities

Laboratory spectral reflectance measurements were made in the 0.4- to 2.5-mu m wavelength range for samples collected from four North American carbonatite-alkalic igneous rock complexes. Alkalic rock spectra produced few absorption features; however, the carbonatites typically showed conspicuous carbonate, ferric and ferrous iron, and in some cases rare earth element absorption bands. Trivalent neodymium was the most abundant rare earth element producing absorption features and could be detected in amounts as low as 300 ppm. Ferrous iron was present in most dolomitic carbonatite samples and caused more intense ferrous absorption bands than commonly is seen in carbonate rocks of sedimentary origin. High carbonatite iron content also resulted in pervasive limonitic staining and related ferric iron absorption features. These absorption features sometimes masked other absorption bands.Because reflectance measurements can be carried out rapidly, with minimal sample preparation, reflectance spectroscopy may provide a useful field and laboratory tool for analyzing economic rare earth concentrations. In addition, the distinctive spectral characteristics of carbonatite material, in conjunction with the discordant spatial relationships between associated alkalic and carbonatite rocks, may provide a basis for remote-sensing detection of these complexes.

Economic Geology↗
USGS1991

Global warming and prairie wetlands: potential consequences for waterfowl habitat

The accumulation of greenhouse gasses in the atmosphere is expected to warm the earth's climate at an unprecedented rate (Ramanathan 1988, Schneider 1989). If the climate models are correct, within 100 years the earth will not only be warmer than it has been during the past million years, but the change will have occurred more rapidly than any on record. Many profound changes in the earth's environment are expected, including rising sea level, increasing aridity in continental interiors, and melting permafrost. Ecosystems are expected to respond variously to a rapidly changing climate. Tree ranges in eastern North American are expected to shift northward, and seed dispersal may not be adequate to maintain current diversity (Cohn 1989, Johnson and Webb 1989). In coastal wetlands, rising sea level from melting icecaps and thermal expansion could flood salt-grass marshes and generally reduce the size and productivity of the intertidal zone (Peters and Darling 1985). As yet, little attention has been given to the possible effects of climatic warming on inland prairie wetland ecosystems. These wetlands, located in the glaciated portion of the North American Great Plains (Figure 1), constitute the single most important breeding area for waterfowl on this continent (Hubbard 1988). This region annually produces 50-80% of the continent's total duck production (Batt et al. 1989). These marshes also support a variety of other wildlife, including many species of nongame birds, muskrat, and mink (Kantrud et al. 1989a). Prairie wetlands are relatively shallow, water-holding depressions that vary in size, water permanence, and water chemistry. Permanence types include temporary ponds (typically holding water for a few weeks in the springs), seasonal ponds (holding water from spring until early summer), semipermanent ponds (holding water throughout the growing season during most years), and large permanent lakes (Stewart and Kantrud 1971). Refilling usually occurs in spring from precipitation and runoff from melting snow on frozen or saturated soils (Figure 2). Annual water levels fluctuate widely due to climate variability in the Great Plains (Borchert 1950, Kantrud et al. 1989b). Climate affects the quality of habitat for breeding waterfowl by controlling regional water conditions--water depth, areal extent, and length of wet/dry cycles (Cowardin et al. 1988)--and vegetation patterns such as the cover ration (the ratio of emergent plant cover to open water). With increased levels of atmospheric carbon dioxide, climate models project warmer and, in some cases, drier conditions for the northern Great Plains (Karl et al. 1991, Manabe and Wetherald 1986, Mitchell 1983, Rind and Lebedeff 1984). In general, a warmer, drier climate could lower waterfowl production directly by increasing the frequency of dry basins and indirectly by producing less favorable cover rations (i.e., heavy emergent cover with few or no open-water areas). The possibility of diminished waterfowl production in a greenhouse climate comes at a time when waterfowl numbers have sharply declined for other reasons (Johnson and Shaffer 1987). Breeding habitat continues to be lost or altered by agriculture, grazing, burning, mowing, sedimentation, and drainage (Kantrud et al. 1989b). For example, it has been estimated that 60% of the wetland area in North Dakota has been drained (Tiner 1984). Pesticides entering wetlands from adjacent agricultural fields have been destructive to aquatic invertebrate populations and have significantly lowered duckling survival (Grue et al. 1988). In this article, we discuss current understanding and projections of global warming; review wetland vegetation dynamics to establish the strong relationship among climate, wetland hydrology, vegetation patterns, and waterflow habitat; discuss the potential effects of a greenhouse warming on these relationships; and illustrate the potential effects of climate change on wetland habitat by using a simulation model. The extent to which intensive management of the waterfowl resource will be needed in the future strongly depends on whether a changing climate exacerbates the current problem of waterfowl decline. Should this occur, efforts outlined the recent North American Waterfowl Management Plan between the United States and Canada to reduce the current decline (Patterson and Nelson 1988) may need to be redoubled in coming years.

BioScience↗
USGS2016

Geochemistry and origin of metamorphosed mafic rocks from the Lower Paleozoic Moretown and Cram Hill Formations of North-Central Vermont: Delamination magmatism in the western New England appalachians

The Moretown Formation, exposed as a north-trending unit that extends from northern Vermont to Connecticut, is located along a critical Appalachian litho-tectonic zone between the paleomargin of Laurentia and accreted oceanic terranes. Remnants of magmatic activity, in part preserved as metamorphosed mafic rocks in the Moretown Formation and the overlying Cram Hill Formation, are a key to further understanding the tectonic history of the northern Appalachians. Field relationships suggest that the metamorphosed mafic rocks might have formed during and after Taconian deformation, which occurred at ca . 470 to 460 Ma. Geochemistry indicates that the sampled metamorphosed mafic rocks were mostly basalts or basaltic andesites. The rocks have moderate TiO 2 contents (1–2.5 wt %), are slightly enriched in the light-rare earth elements relative to the heavy rare earths, and have negative Nb-Ta anomalies in MORB-normalized extended rare earth element diagrams. Their chemistry is similar to compositions of basalts from western Pacific extensional basins near volcanic arcs. The metamorphosed mafic rocks of this study are similar in chemistry to both the pre-Silurian Mount Norris Intrusive Suite of northern Vermont, and also to some of Late Silurian rocks within the Lake Memphremagog Intrusive Suite, particularly the Comerford Intrusive Complex of Vermont and New Hampshire. Both suites may be represented among the samples of this study. The geochemistry of all samples indicates that parental magmas were generated in supra-subduction extensional environments during lithospheric delamination.

American Journal of Science↗
USGS1998

Earthquakes

One of the most frightening and destructive phenomena of nature is a severe earthquake and its terrible aftereffects. An earthquake is a sudden movement of the Earth, caused by the abrupt release of strain that has accumulated over a long time. For hundreds of millions of years, the forces of plate tectonics have shaped the Earth as the huge plates that form the Earth's surface slowly move over, under, and past each other. Sometimes the movement is gradual. At other times, the plates are locked together, unable to release the accumulating energy. When the accumulated energy grows strong enough, the plates break free. If the earthquake occurs in a populated area, it may cause many deaths and injuries and extensive property damage. Today we are challenging the assumption that earthquakes must present an uncontrollable and unpredictable hazard to life and property. Scientists have begun to estimate the locations and likelihoods of future damaging earthquakes. Sites of greatest hazard are being identified, and definite progress is being made in designing structures that will withstand the effects of earthquakes.

General Interest Publication↗
USGS1980

United States Geological Survey Yearbook, fiscal year 1979

In March 1979, the U.S. Geological Survey celebrated its 100th year of service to the Nation and 10 decades of stewardship of the land and its resources. During this year, as in the previous 99, the Survey discharged its national trust by collecting, analyzing, and disseminating earth science information and by continuing its somewhat more recent responsibilities of supervising the development of energy and mineral resources on Federal lands. The basic mission of the Survey has changed over the years, and the scope of its activities and the power of analytic tools have also increased by several orders of magnitude from the early surveys of then "remote" western areas of the United States to surveying and mapping the mountains of the Moon and the polar caps of Mars and from the use of surveyor's transits, picks, the travelling chemistry kits to interpretation of Earth imagery. These representative advances illustrate important and continuing trends for at no previous time have our earth resources been so precious or our consciousness of their finiteness so acute. The Yearbook reports a broad range of the Survey's accomplishments during the past fiscal year and offers an overview of its future. Many of the topics touched on below will continue to be important resource issues in the coming decade.

Yearbook↗
USGS1991

Earthquakes

One of the most frightening and destructive phenomena of nature that man experiences is a severe earthquake and its terrible aftereffects. Since long before man existed, probably for more than 4 billion years, the forces within the Earth that produce earthquakes have played an active role in shaping the Earth's surface. These unpredictable catastrophic movements of the Earth have caused a great number of human casualties and extensive property damage. Today man is challenging the assumption that earthquakes must present an uncontrollable and unpredictable hazard to life and property. Scientists have begun to explore the means of predicting earthquakes. Sites of greatest hazard are being identified, and definite progress is being made in designing structures that will withstand the effects of earthquakes.

General Information Product↗