USGS Science⌕ Search

SEARCH · USGS Science

Results for “Data Science in Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56Linked to original sources

Optical dating of tufa via in situ aeolian sand grains: A case example from the Southern High Plains, USA

Precipitated carbonates (commonly termed tufas or travertines) maybe of considerable utility for palaeoenvironmental reconstruction. Their potential, however, for such reconstruction is commonly limited by difficulties associated with their absolute age control. Attempts to date such deposits via uranium series techniques have been complicated by their chemically open behaviour. Here we describe an alternative approach to date tufa deposits associated with ephemeral saline lake basins from the Southern High Plains, USA. We have optically dated sand grains of a mixed aeolian/fluvial (spring fed) origin as the integrating dosimeter. We assume that the grains are fully resetting prior to their incorporation into the tufa deposits and employ a time-dependent disequilibrium dosimetric model to account for the build-up of uranium series daughter products. The approach was applied to a set of four samples with known stratigraphic association. We obtained stratigraphically sensible optical ages ranging from 78??8 to 56??4ka. These data are consistent with existing palaeoenvironmental models of regional recharge. ?? 2003 Elsevier Science Ltd. All rights reserved.

Conference Paper↗

Factors associated with sources, transport, and fate of volatile organic compounds and their mixtures in aquifers of the United States

Factors associated with sources, transport, and fate of volatile organic compounds (VOCs) in groundwater from aquifers throughout the United States were evaluated using statistical methods. Samples were collected from 1631 wells throughout the conterminous United States between 1996 and 2002 as part of the National Water-Quality Assessment (NAWQA) Program of the U.S. Geological Survey. Water samples from wells completed in aquifers used to supply drinking water were analyzed for more than 50 VOCs. Wells were primarily rural domestic water supplies (1184), followed by public water supplies (216); the remaining wells (231) supplied a variety of uses. The median well depth was 50 meters. Age-date information shows that about 60% of the samples had a fraction of water recharged after 1953. Chloroform, toluene, 1,2,4-trimethylbenzene, and perchloroethene were some of the frequently detected VOCs. Concentrations generally were less than 1 ??g/L. Source factors include, in order of importance, general land-use activity, septic/sewer density, and sites where large concentrations of VOCs are potentially released, such as leaking underground storage tanks. About 10% of all samples had VOC mixtures that were associated with concentrated sources; 20% were associated with dispersed sources. Important transport factors included well/screen depth, precipitation/groundwater recharge, air temperature, and various soil characteristics. Dissolved oxygen was strongly associated with VOCs and represents the fate of many VOCs in groundwater. Well type (domestic or public water supply) was also an important explanatory factor. Results of multiple analyses show the importance of (1) accounting for both dispersed and concentrated sources of VOCs, (2) measuring dissolved oxygen when sampling wells to help explain the fate of VOCs, and (3) limiting the type of wells sampled in monitoring networks to avoid unnecessary variance in the data, or controlling for this variance during data analysis.

Environmental Science & Technology↗

Evaluation of statistical treatments of left-censored environmental data using coincident uncensored data sets: I. Summary statistics

The main classes of statistical treatment of below-detection limit (left-censored) environmental data for the determination of basic statistics that have been used in the literature are substitution methods, maximum likelihood, regression on order statistics (ROS), and nonparametric techniques. These treatments, along with using all instrument-generated data (even those below detection), were evaluated by examining data sets in which the true values of the censored data were known. It was found that for data sets with less than 70% censored data, the best technique overall for determination of summary statistics was the nonparametric Kaplan-Meier technique. ROS and the two substitution methods of assigning one-half the detection limit value to censored data or assigning a random number between zero and the detection limit to censored data were adequate alternatives. The use of these two substitution methods, however, requires a thorough understanding of how the laboratory censored the data. The technique of employing all instrument-generated data - including numbers below the detection limit - was found to be less adequate than the above techniques. At high degrees of censoring (greater than 70% censored data), no technique provided good estimates of summary statistics. Maximum likelihood techniques were found to be far inferior to all other treatments except substituting zero or the detection limit value to censored data.

Environmental Science & Technology↗

Evapotranspiration estimation using a normalized difference vegetation index transformation of satellite data

Evapotranspiration of irrigated crops on two irrigation service areas along the lower Colorado River was estimated using a normalized difference vegetation index of satellite data. A procedure was developed which equated the index to crop coefficients. Evapotranspiration estimates for fields for three dates of thematic mapper data were highly correlated with ground estimates. Service area estimates using thematic mapper and Advanced Very High Resolution Radiometer data agreed well with estimates based on US Geological Survey gauging station data.

Hydrological Sciences Journal↗

L5 TM radiometric recalibration procedure using the internal calibration trends from the NLAPS trending database

From the Landsat program's inception in 1972 to the present, the earth science user community has benefited from a historical record of remotely sensed data. The multispectral data from the Landsat 5 (L5) Thematic Mapper (TM) sensor provide the backbone for this extensive archive. Historically, the radiometric calibration procedure for this imagery used the instrument's response to the Internal Calibrator (IC) on a scene-by-scene basis to determine the gain and offset for each detector. The IC system degraded with time causing radiometric calibration errors up to 20 percent. In May 2003 the National Landsat Archive Production System (NLAPS) was updated to use a gain model rather than the scene acquisition specific IC gains to calibrate TM data processed in the United States. Further modification of the gain model was performed in 2007. L5 TM data that were processed using IC prior to the calibration update do not benefit from the recent calibration revisions. A procedure has been developed to give users the ability to recalibrate their existing Level-1 products. The best recalibration results are obtained if the work order report that was originally included in the standard data product delivery is available. However, many users may not have the original work order report. In such cases, the IC gain look-up table that was generated using the radiometric gain trends recorded in the NLAPS database can be used for recalibration. This paper discusses the procedure to recalibrate L5 TM data when the work order report originally used in processing is not available. A companion paper discusses the generation of the NLAPS IC gain and bias look-up tables required to perform the recalibration.

Conference Paper↗

A model of strength

In her AAAS News & Notes piece "Can the Southwest manage its thirst?" (26 July, p. 362), K. Wren quotes Ajay Kalra, who advocates a particular method for predicting Colorado River streamflow "because it eschews complex physical climate models for a statistical data-driven modeling approach." A preference for data-driven models may be appropriate in this individual situation, but it is not so generally, Data-driven models often come with a warning against extrapolating beyond the range of the data used to develop the models. When the future is like the past, data-driven models can work well for prediction, but it is easy to over-model local or transient phenomena, often leading to predictive inaccuracy (1). Mechanistic models are built on established knowledge of the process that connects the response variables with the predictors, using information obtained outside of an extant data set. One may shy away from a mechanistic approach when the underlying process is judged to be too complicated, but good predictive models can be constructed with statistical components that account for ingredients missing in the mechanistic analysis. Models with sound mechanistic components are more generally applicable and robust than data-driven models.

Science↗

Initial implementation of The National Map

The development of The National Map is "national" in the broadest sense of the word. Although the U.S. Geological Survey is taking the lead, local governments, states, and regions are active and essential partners in the process, contributing, for example, data updates, problem-solving data integration, and map development from multiple data layers.

Cartography and Geographic Information Science↗

Remote sensing for grassland management in the arid Southwest

We surveyed a group of rangeland managers in the Southwest about vegetation monitoring needs on grassland. Based on their responses, the objective of the RANGES (Rangeland Analysis Utilizing Geospatial Information Science) project was defined to be the accurate conversion of remotely sensed data (satellite imagery) to quantitative estimates of total (green and senescent) standing cover and biomass on grasslands and semidesert grasslands. Although remote sensing has been used to estimate green vegetation cover, in arid grasslands herbaceous vegetation is senescent much of the year and is not detected by current remote sensing techniques. We developed a ground truth protocol compatible with both range management requirements and Landsat's 30 m resolution imagery. The resulting ground-truth data were then used to develop image processing algorithms that quantified total herbaceous vegetation cover, height, and biomass. Cover was calculated based on a newly developed Soil Adjusted Total Vegetation Index (SATVI), and height and biomass were estimated based on reflectance in the near infrared (NIR) band. Comparison of the remotely sensed estimates with independent ground measurements produced r2 values of 0.80, 0.85, and 0.77 and Nash Sutcliffe values of 0.78, 0.70, and 0.77 for the cover, plant height, and biomass, respectively. The approach for estimating plant height and biomass did not work for sites where forbs comprised more than 30% of total vegetative cover. The ground reconnaissance protocol and image processing techniques together offer land managers accurate and timely methods for monitoring extensive grasslands. The time-consuming requirement to collect concurrent data in the field for each image implies a need to share the high fixed costs of processing an image across multiple users to reduce the costs for individual rangeland managers.

Rangeland Ecology and Management↗

Inexpensive automated paging system for use at remote research sites

The use of a flow-activated automatic sampler at a remote research site required personnel to periodically visit the site to collect samples and reset the automatic sampler. To reduce site visits, a cellular telephone was modified for activation by a datalogger. The purpose of this study was to demonstrate the use and benefit of the modified telephone. Both the power switch and the speed-dial button on the telephone were bypassed and wired to a relay driver. The datalogger was programmed to compare values of a monitored environmental parameter with a target value. When the target value was reached or exceeded, the datalogger pulsed a relay driver, activating power to the telephone. A separate relay activated the speed dial, dialing the number of a tone-only pager. The use of this system has saved time and reduced travel costs by reducing the number of trips to the site, without the loss of any data.The use of a flow-activated automatic sampler at a remote research site required personnel to periodically visit the site to collect samples and reset the automatic sampler. To reduce site visits, a cellular telephone was modified for activation by a datalogger. The purpose of this study was to demonstrate the use and benefit of the modified telephone. Both the power switch and the speed-dial button on the telephone were bypassed and wired to a relay driver. The datalogger was programmed to compare values of a monitored environmental parameter with a target value. When the target value was reached or exceeded, the datalogger pulsed a relay driver, activating power to the telephone. A separate relay activated the speed dial, dialing the number of a tone-only pager. The use of this system has saved time and reduced travel costs by reducing the number of trips to the site, without the loss of any data.

Soil Science Society of America Journal↗

Sediment data collected in 2013 from the northern Chandeleur Islands, Louisiana

As part of the Barrier Island Evolution Research project, scientists from the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center collected sediment samples from the northern Chandeleur Islands in July 2013. The overall objective of this project, which integrates geophysical (bathymetric, seismic, and topographic) and sedimentologic data, is to better understand the depositional and erosional processes that drive the morphologic evolution of barrier islands over annual to interannual timescales (1 to 5 years). Between June 2010 and April 2011, in response to the Deepwater Horizon oil spill, the State of Louisiana constructed a sand berm extending more than 14 kilometers along the northern Chandeleur Islands platform. The construction of the berm provided a unique opportunity to investigate how this new sediment source will interact with and affect the morphologic evolution of the barrier-island system. Data collected from this study will be used to describe differences in the physical characteristics and spatial distribution of sediments both along the axis of the berm and also along transects across the berm and onto the adjacent barrier island. Comparison of these data with data from previous sampling efforts will provide information about sediment interactions and movement between the berm and the natural island platform, improving our understanding of short-term morphologic change and processes in this barrier-island system. This data series serves as an archive of sediment data collected in July 2013 from the Chandeleur Islands sand berm and adjacent barrier-island environments. Data products include descriptive core logs, core photographs and x-radiographs, results of sediment grain-size analyses, sample location maps, and Geographic Information System data files with accompanying formal Federal Geographic Data Committee metadata.

Louisiana↗

Geologic and geophysical maps of the El Casco 7.5′ quadrangle, Riverside County, southern California, with accompanying geologic-map database

Introduction Earth materials and structures in the El Casco quadrangle provide considerable information about the late Cenozoic geologic evolution of southern California’s Inland Empire region (fig. 2). Important structural and stratigraphic elements include (1) modern traces of the right-lateral San Jacinto Fault zone, (2) older traces of the San Jacinto Fault zone, and (3) sedimentary materials and geologic structures that formed during the last eight million years or so and that record interactions within the San Andreas Fault system. These materials, and the structures that deform them, provide a geologic context 3 for investigations of groundwater recharge and subsurface flow (Waring, 1919; Burnham and Dutcher, 1960; Bloyd, 1971; Rewis and others, 2006). This geologic database of the El Casco 7.5′ quadrangle was prepared by the Basins and Landscape Co-Evolution Project (BALANCE), a regional geologic-mapping project sponsored jointly by the U.S. Geological Survey and the California Geological Survey. The database was developed as a contribution to the National Cooperative Geologic Mapping Program’s National Geologic Map Database, and provides a general geologic setting of the El Casco quadrangle. The database and map provide information about earth materials and geologic structures, including faults and folds that have developed in the quadrangle due to complexities in the San Andreas Fault system. Geologic information contained in the El Casco database is general-purpose data applicable to land-related investigations in the earth and biological sciences. The term “general-purpose” means that all geologic-feature classes have minimal information content adequate to characterize their general geologic characteristics and to interpret their general geologic history. However, no single feature class has enough information to definitively characterize its properties and origin. For this reason the database cannot be used for site-specific geologic evaluations, although it can be used to plan and guide investigations at the site-specific level.

California↗

Water-quality and geochemical variability in the Little Arkansas River and Equus aquifer, south-central Kansas, 2001–16

The city of Wichita’s water supply currently (2019) comes from two primary sources: Cheney Reservoir and the Equus Beds aquifer. The Equus Beds aquifer storage and recovery project was developed to help the city of Wichita meet increasing future water demands. Source water for artificial recharge comes from the Little Arkansas River during above-base-flow conditions, is treated using National Primary Drinking Water Regulations as a guideline, and is injected into the Equus Beds aquifer through recharge wells or surface spreading basins for later use. The Equus Beds aquifer storage and recovery project currently (2019) consists of two coexisting phases. Phase I began in 2007 and captures Little Arkansas River water and indirect streambank diversion well water for aquifer recharge using 4 wells and 2 recharge basins. Phase II began in 2013 and currently (2019) includes a surface-water treatment facility, a river intake facility, eight recharge injection wells, and a third recharge basin. The U.S. Geological Survey, in cooperation with the City of Wichita, completed this study to summarize water-quality and geochemical variability of the Equus Beds aquifer. Data in this report can be used to establish baseline conditions before implementing artificial aquifer recharge further, document groundwater quality, evaluate changing conditions, identify environmental factors affecting groundwater, provide science-based information for decision making, and help meet regulatory monitoring requirements. Physicochemical properties were measured and water-quality data were collected from 2 Little Arkansas River surface-water sites and 63 Equus Beds aquifer groundwater sites, including 38 areal assessment index wells (IWs) during 2001 through 2016. Data collection included discrete samples and additional continuous measurements at selected sites. Discretely collected samples were analyzed for physicochemical properties, dissolved solids, primary ions, nutrients (nitrogen and phosphorus species), organic carbon, indicator bacteria, trace elements, arsenic species, organic compounds, and radioactivity. This report focuses discussion on aquifer water quality. Federal drinking-water criteria were used to evaluate aquifer water quality. Primary drinking-water criteria are those that are enforceable for public drinking water. Secondary criteria are those that can cause aesthetics or tastes that are unpleasant. Continuously collected data at a subset of sites included streamflow, groundwater levels, water temperature, specific conductance, pH, oxidation-reduction potential (ORP), dissolved oxygen, turbidity, nitrate plus nitrite, and fluorescent dissolved organic matter. Continuous measurement of physicochemical properties in near-real time allowed characterization of Little Arkansas River surface water and Equus Beds aquifer groundwater during conditions and time scales that would not have been possible otherwise and served as a complement to discrete water-quality sampling. During 2001 through 2016, less than 1 percent of chloride and nitrate plus nitrite, 7 percent of dissolved iron, 48 percent of dissolved manganese, 12 percent of dissolved arsenic, and 39 percent of atrazine detections in surface-water samples exceeded their respective Federal primary or secondary drinking-water criteria. None of the surface-water samples collected exceeded the Federal sulfate criterion, and every sample had detections of total coliform bacteria during the study. Constituents of concern in the Equus Beds aquifer exceeded their respective Federal criteria throughout the study period and included chloride, sulfate, nitrate plus nitrite, Escherichia coli ( E. coli ), total coliforms, and dissolved iron and arsenic species. About 5 percent of shallow (less than 80 feet) and 7 percent of deep (greater than 80 feet) IW chloride sample concentrations exceeded the secondary Federal criterion of 250 milligrams per liter (mg/L). Chloride tended to exceed its criterion in shallow and deep wells along the Arkansas River and near Burrton, Kansas, an area with past oil and gas activities. Chloride concentrations near Burrton were larger in the deep parts of the aquifer. About 18 percent of shallow and 13 percent of deep IW sulfate sample concentrations exceeded the secondary Federal criterion of 250 mg/L. Mean sulfate concentrations tended to exceed the criterion in the central part of the study area. Shallow IW mean nitrate plus nitrite (hereafter referred to as “nitrate”) was substantially larger than mean deep IW nitrate. Geochemical conditions in the deeper aquifer reduced forms of nitrogen to species such as ammonia. About 15 percent of shallow and less than 1 percent of deep IW nitrate sample concentrations exceeded the Federal criterion of 10 mg/L. Mean shallow IW nitrate concentrations exceeded the criterion in the northeastern and southeastern parts of the study area; on average, deep IW nitrate concentrations did not exceed the criterion. E. coli and fecal coliform bacteria detections were usually at or near the detection limit. E. coli was detected in 3 percent of shallow and deep IWs, and fecal coliform bacteria were detected in 8 percent of shallow and 6 percent of deep IWs. Total coliforms were detected in 24 percent of shallow and 12 percent of deep IWs. E. coli coliphage was detected in two shallow IW samples (1 percent of samples) at the detection limit and was not detected in deep IW samples. Dissolved iron was detected in 51 percent of shallow and 62 percent of deep IW samples. Dissolved iron concentrations exceeded the secondary Federal criterion of 0.3 mg/L in 38 percent of shallow and 46 percent of deep IW samples. Mean dissolved iron concentrations were largest mostly in the central and northwest part of the study area corresponding to an area of the aquifer where aquifer material is more clay-rich. The distribution of large dissolved iron concentrations was similar to that of large sulfate concentrations. About 55 percent of shallow and 92 percent of deep IW dissolved manganese samples exceeded the secondary Federal criterion of 0.05 mg/L. Almost all samples from the central and northern parts of the study area had mean dissolved manganese concentrations that exceeded the Federal criterion in the shallow part of the aquifer. Mean dissolved manganese concentrations in the shallow part of the aquifer were substantially large (greater than 1,000 micrograms per liter [μg/L]) in wells near the Little Arkansas River and in the central part of the study area because of chemically reducing conditions in the aquifer that likely related to larger percentages of clay in the aquifer material. Concentrations of dissolved arsenic species generally were larger in the deep parts of the aquifer. Arsenite was the dominant form of arsenic on average in shallow (52 percent) and deep (55 percent) IWs. About 12 percent of shallow and 34 percent of deep IW dissolved arsenic sample concentrations exceeded the Federal primary drinking criterion of 10 μg/L. Shallow IW dissolved arsenic concentrations were larger near the Little Arkansas River and the center of the study area; large shallow IW dissolved arsenic concentrations (10–50 μg/L) in the center of the study area correspond to areas that have had the most water-level recovery since the historical low in 1993. Mean ORP in shallow IWs generally decreased with increasing water-level depths and were inversely related to mean dissolved arsenic concentrations because of more reducing conditions (smaller ORP) at larger depths below the land surface. Larger dissolved arsenic concentrations in the shallow parts of the aquifer were associated with decreases in water levels and a subsequent decrease in ORP and thus more reducing conditions. Atrazine was detected in about 58 percent of shallow and 28 percent of deep IWs and did not exceed the primary Federal criterion of 3 μg/L in any groundwater samples. Atrazine concentrations in shallow IWs generally were largest in the northwest part of the study area near the North Branch Kisiwa Creek, and atrazine concentrations in deep IWs generally were largest most often in the southern part of the study area. Gross α radioactivity concentrations exceeded the primary Federal criterion of 15 picocuries per liter in 4 percent of shallow IW samples. Gross α and gross β radioactivity concentrations generally were larger in the southern third of the aquifer. Most groundwater-sample-simulated minerals saturation indices (SIs) were consistently negative (undersaturated). Minerals that had SI values that were consistently or typically positive (oversaturated) included iron oxide, hydroxide, and quartz-group minerals. Several SI values for arsenic- and manganese-bearing minerals were consistently negative. Some manganese-bearing mineral SI values ranged from undersaturated to oversaturated in shallow and deep IWs during the study. Several carbonate minerals in shallow and deep IWs varied across their equilibrium state. Calcite SI values were larger more often in the deep parts of the aquifer and did not show a clear distributional pattern. Mean and median calcite SI values for shallow and deep IWs were negative (undersaturated) indicating the potential for calcite dissolution if calcite is present for a substantial part of the study period. However, some individual calcite SI values in this study indicated saturation and subsequent calcite precipitation may occur in the study area, potentially resulting in formation of calcite mineral deposits that may reduce efficiency of injection wells. SI values with respect to iron hydroxide varied across their equilibrium states. Mean and median SI values with respect to iron hydroxide were undersaturated in shallow and deep IWs; however, some samples had positive SI values indicating there is potential for iron hydroxide precipitation, possibly caused by leaching and oxidation of iron-containing minerals, like pyrite, in the aquifer material.

Kansas↗

Statistical methods in water resources

This text began as a collection of class notes for a course on applied statistical methods for hydrologists taught at the U.S. Geological Survey (USGS) National Training Center. Course material was formalized and organized into a textbook, first published in 1992 by Elsevier as part of their Studies in Environmental Science series. In 2002, the work was made available online as a USGS report. The text has now been updated as a USGS Techniques and Methods Report. It is intended to be a text in applied statistics for hydrology, environmental science, environmental engineering, geology, or biology that addresses distinctive features of environmental data. For example, water resources data tend to have many variables with a lower bound of zero, tend to be more skewed than data from many other disciplines, commonly contain censored data (less than values), and assumptions that the data are normally distributed are not appropriate. Computer-intensive methods (bootstrapping and permutation tests) now improve upon and replace the dependence on t-intervals, t-tests, and analysis of variance. A new chapter on sampling design addresses questions such as “How many observations do I need?” The chapter also presents distribution-free methods to help plan sampling efforts. The trends chapter has been updated to include the WRTDS (Weighted Regressions on Time, Discharge, and Season) method for analysis of water-quality data. This new version contains updated graphics and updated guidance on the use of statistical techniques. The text utilizes R, a programming language and open-source software environment, for all exercises and most graphics, and the R code used to generate figures and examples is provided for download.

Techniques and Methods↗

Historical legacies, information and contemporary water science and management

Hydrologic science has largely built its understanding of the hydrologic cycle using contemporary data sources (i.e., last 100 years). However, as we try to meet water demand over the next 100 years at scales from local to global, we need to expand our scope and embrace other data that address human activities and the alteration of hydrologic systems. For example, the accumulation of human impacts on water systems requires exploration of incompletely documented eras. When examining these historical periods, basic questions relevant to modern systems arise: (1) How is better information incorporated into water management strategies? (2) Does any point in the past (e.g., colonial/pre-European conditions in North America) provide a suitable restoration target? and (3) How can understanding legacies improve our ability to plan for future conditions? Beginning to answer these questions indicates the vital need to incorporate disparate data and less accepted methods to meet looming water management challenges.

Water↗

Technology and the study of wildfire: Middle school students study the impacts of wildfire

Various technologies that can assist students in exploring the human and environmental impacts of wildfire and in communicating their findings are discussed. Wildfires occur in many parts of the world, and provide an excellent opportunity for students to study local and global interdisciplinary issues using technology. Prior to the beginning of the field study, students take instructions in both their math and science classes about the distinction and appropriate uses of quantitative and qualitative data. Use of computer programs such as Excel spreadsheets which can contain data, and interaction of research and technology group with students, can help them collect best of the information and in making an accurate report.

Meridian↗

The U.S. Geological Survey Bird Banding Laboratory: an integrated scientific program supporting research and conservation of North American birds

The U.S. Geological Survey (USGS) Bird Banding Laboratory (BBL) was established in 1920 after ratification of the Migratory Bird Treaty Act with the United Kingdom in 1918. During World War II, the BBL was moved from Washington, D.C., to what is now the USGS Patuxent Wildlife Research Center (PWRC). The BBL issues permits and bands to permittees to band birds, records bird band recoveries or encounters primarily through telephone and Internet reporting, and manages more than 72 million banding records and more than 4.5 million records of encounters using state-of-the-art technologies. Moreover, the BBL also issues bands and manages banding and encounter data for the Canadian Bird Banding Office (BBO). Each year approximately 1 million bands are shipped from the BBL to banders in the United States and Canada, and nearly 100,000 encounter reports are entered into the BBL systems. Banding data are essential for regulatory programs, especially migratory waterfowl harvest regulations. The USGS BBL works closely with the U.S. Fish and Wildlife Service (USFWS) to develop regulations for the capture, handling, banding, and marking of birds. These regulations are published in the Code of Federal Regulations (CFR). In 2006, the BBL and the USFWS Division of Migratory Bird Management (DMBM) began a comprehensive revision of the banding regulations. The bird banding community has three major constituencies: Federal and State agency personnel involved in the management and conservation of bird populations that include the Flyway Councils, ornithological research scientists, and avocational banders. With increased demand for banding activities and relatively constant funding, a Federal Advisory Committee (Committee) was chartered and reviewed the BBL program in 2005. The final report of the Committee included six major goals and 58 specific recommendations, 47 of which have been addressed by the BBL. Specifically, the Committee recommended the BBL continue to support science, conservation, and management of birds through the use of banding and banding data and that the BBL be managed by the USGS and located at the USGS Patuxent Wildlife Research Center (PWRC) in Laurel, Maryland. Recommendations that have not been implemented include those already addressed by other organizations, as well as lower priority, such as developing a BBL business plan. The comprehensive review and recommendations of the Committee, the response of the BBL to address the Committee’s recommendations, and other improvements to its operations have positioned the BBL to provide a high level of service to the banding community. As new technologies are developed and incorporated into BBL operations, further efficiencies are expected to enable the BBL to continue to meet emerging scientific needs.

Open-File Report↗

The Bathy-drone: An autonomous unmanned drone-tethered sonar system

A unique drone-based system for underwater mapping (bathymetry) was developed at the University of Florida. The system, called the “Bathy-drone”, comprises a drone that drags, via a tether, a small vessel on the water surface in a raster pattern. The vessel is equipped with a recreational commercial off-the-shelf (COTS) sonar unit that has down-scan, side-scan, and chirp capabilities and logs GPS-referenced sonar data onboard or transmitted in real time with a telemetry link. Data can then be retrieved post mission and plotted in various ways. The system provides both isobaths and contours of bottom hardness. Extensive testing of the system was conducted on a 5 acre pond located at the University of Florida Plant Science and Education Unit in Citra, FL. Prior to performing scans of the pond, ground-truth data were acquired with an RTK GNSS unit on a pole to precisely measure the location of the bottom at over 300 locations. An assessment of the accuracy and resolution of the system was performed by comparison to the ground-truth data. The pond ground truth had an average depth of 2.30 m while the Bathy-drone measured an average 21.6 cm deeper than the ground truth, repeatable to within 2.6 cm. The results justify integration of RTK and IMU corrections. During testing, it was found that there are numerous advantages of the Bathy-drone system compared to conventional methods including ease of implementation and the ability to initiate surveys from the land by flying the system to the water or placing the platform in the water. The system is also inexpensive, lightweight, and low-volume, thus making transport convenient. The Bathy-drone can collect data at speeds of 0–24 km/h (0–15 mph) and, thus, can be used in waters with swift currents. Additionally, there are no propellers or control surfaces underwater; hence, the vessel does not tend to snag on floating vegetation and can be dragged over sandbars. An area of more than 10 acres was surveyed using the Bathy-drone in one battery charge and in less than 25 min.

Drones↗