USGS Science⌕ Search

SEARCH · USGS Science

Results for “Topographic Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55Linked to original sources

Fluid expulsion sites on the Cascadia accretionary prism: mapping diagenetic deposits with processed GLORIA imagery

Point-discharge fluid expulsion on accretionary prisms is commonly indicated by diagenetic deposition of calcium carbonate cements and gas hydrates in near-surface (<10 m below seafloor; mbsf) hemipelagic sediment. The contrasting clastic and diagenetic lithologies should be apparent in side scan images. However, sonar also responds to variations in bottom slope, so unprocessed images mix topographic and lithologic information. We have processed GLORIA imagery from the Oregon continental margin to remove topographic effects. A synthetic side scan image was created initially from Sea Beam bathymetric data and then was subtracted iteratively from the original GLORIA data until topographic features disappeared. The residual image contains high-amplitude backscattering that we attribute to diagenetic deposits associated with fluid discharge, based on submersible mapping, Ocean Drilling Program drilling, and collected samples. Diagenetic deposits are concentrated (1) near an out-of-sequence thrust fault on the second ridge landward of the base of the continental slope, (2) along zones characterized by deep-seated strikeslip faults that cut transversely across the margin, and (3) in undeformed Cascadia Basin deposits which overlie incipient thrust faults seaward of the toe of the prism. There is no evidence of diagenetic deposition associated with the frontal thrust that rises from the dècollement. If the dècollement is an important aquifer, apparently the fluids are passed either to the strike-slip faults which intersect the dècollement or to the incipient faults in Cascadia Basin for expulsion. Diagenetic deposits seaward of the prism toe probably consist dominantly of gas hydrates.

Cascadia Basin↗

Geologic map of the Aeolis Dorsa Region, Mars

The Aeolis Dorsa region of Mars, located just north of the global dichotomy boundary, includes the Aeolis and Zephyria Plana, and a depositional basin between them. This interplana region consists of extensive networks of ridges—the eponymous Aeolis Dorsa—and is interpreted as having formed by topographic inversion of fluvial and alluvial deposits. To the south is a nearly 1-km-deep trough (Aeolis Chaos) and the southern highlands. These elements of the map area compose a landscape of extensive erosional and depositional sedimentary processes. The plana are pervasively abraded into yardangs, and the interplana area shows scattered yardangs superposed on the underlying terrain. The Aeolis Dorsa fluvial deposits are concentrated within and around the margins of the interplana region, exposed and (or) inverted by this pervasive aeolian abrasion. During this period of extensive erosion and deposition, impacts have also redistributed material. The geologic mapping of this region, conducted at 1:500,000 scale to enable depiction of the fine-scale fluvial features, divides the landscape into six unit groups. The highlands units group comprises three units, located in the southwestern map area. These units, having the highest elevation in the map area, consist of mesas surrounded by more gently sloping terrain. The transitional units group, located northeast of the highlands units, includes the Aeolis Chaos, denoted as a chaos terrain unit, and two transitional units, differentiated on the basis of surface texture and relative elevation. The plana units group comprises five units. The oldest unit consists of mesas similar to those of the highlands mesas unit but located about 200 kilometers north of the highlands in Aeolis Planum. Three other plana units, located on the Aeolis and Zephyria Plana, are differentiated on the basis of yardang texture, crosscutting relations, and relative elevations. They are interpreted as abraded sedimentary and (or) volcaniclastic deposits. The fifth plana unit, which crops out in the north corners of the map area, is at low elevation, has numerous small craters, and is interpreted as cratered lava plains. The interplana units group hosts a hummocky unit and a mounds unit, differentiated on the basis of texture and relief. In the Aeolis Dorsa units group, four units are mapped on the basis of dorsa morphology and adjacent textures. Stratigraphic relations indicate a decrease in discharge over time. The crater units group includes a crater unit, found throughout the map area although concentrated within the interplana region, and a crater fill unit that is found within several craters in this interplana region. Based on this mapping, the interpretation of the regional geologic record begins with emplacement of the highlands terrain during the Noachian Period. Emplacement was followed during the Early Hesperian by erosion and redistribution of this high-standing terrain to form the transitional units, and Aeolis Chaos formed after deposition of the other transitional units. The high-standing plana were emplaced and eroded repeatedly throughout the Hesperian and Early Amazonian time, and impact cratering occurred at decreasing crater sizes. The fluvial and alluvial activity that gave rise to the Aeolis Dorsa also extended throughout this time, leaving their diagnostic signature on this region.

Scientific Investigations Map↗

Geologic map of the Chewelah 30' x 60' Quadrangle, Washington and Idaho

This data set maps and describes the geology of the Chewelah 30' X 60' quadrangle, Washington and Idaho. Created using Environmental Systems Research Institute's ARC/INFO software, the data base consists of the following items: (1) a map coverage containing geologic contacts and units, (2) a point coverage containing site-specific geologic structural data, (3) two coverages derived from 1:100,000 Digital Line Graphs (DLG); one of which represents topographic data, and the other, cultural data, (4) two line coverages that contain cross-section lines and unit-label leaders, respectively, and (5) attribute tables for geologic units (polygons), contacts (arcs), and site-specific data (points). In addition, the data set includes the following graphic and text products: (1) A PostScript graphic plot-file containing the geologic map, topography, cultural data, and two cross sections, and on a separate sheet, a Correlation of Map Units (CMU) diagram, an abbreviated Description of Map Units (DMU), modal diagrams for granitic rocks, an index map, a regional geologic and structure map, and a key for point and line symbols; (2) PDF files of the Readme text-file and expanded Description of Map Units (DMU), and (3) this metadata file. The geologic map database contains original U.S. Geological Survey data generated by detailed field observation and by interpretation of aerial photographs. The map was compiled from geologic maps of eight 1:48,000 15' quadrangle blocks, each of which was made by mosaicing and reducing the four constituent 7.5' quadrangles. These 15' quadrangle blocks were mapped chiefly at 1:24,000 scale, but the detail of the mapping was governed by the intention that it was to be compiled at 1:48,000 scale. The compilation at 1:100,000 scale entailed necessary simplification in some areas and combining of some geologic units. Overall, however, despite a greater than two times reduction in scale, most geologic detail found on the 1:48,000 maps is retained on the 1:100,000 map. Geologic contacts across boundaries of the eight constituent quadrangles required minor adjustments, but none significant at the final 1:100,000 scale. The geologic map was compiled on a base-stable cronoflex copy of the Chewelah 30' X 60' topographic base and then scribed. The scribe guide was used to make a 0.007 mil-thick blackline clear-film, which was scanned at 1200 DPI by Optronics Specialty Company, Northridge, California. This image was converted to vector and polygon GIS layers and minimally attributed by Optronics Specialty Company. Minor hand-digitized additions were made at the USGS. Lines, points, and polygons were subsequently edited at the USGS by using standard ARC/INFO commands. Digitizing and editing artifacts significant enough to display at a scale of 1:100,000 were corrected. Within the database, geologic contacts are represented as lines (arcs), geologic units as polygons, and site-specific data as points. Polygon, arc, and point attribute tables (.pat, .aat, and .pat, respectively) uniquely identify each geologic datum.

Miscellaneous Field Studies Map↗

Environmental conditions associated with bat white-nose syndrome in the north-eastern United States

1. White-nose syndrome (WNS) is an emerging disease of hibernating North American bats that is caused by the cold-growing fungus Geomyces destructans . Since first observed in the winter of 2007, WNS has led to unprecedented mortality in several species of bats and may threaten more than 15 additional hibernating bat species if it continues across the continent. Although the exact means by which fungal infection causes mortality are undetermined, available evidence suggests a strong role of winter environmental conditions in disease mortality. 2. By 2010, the fungus G. destructans was detected in new areas of North America far from the area it was first observed, as well as in eight European bat species in different countries, yet mortality was not observed in many of these new areas of North America or in any part of Europe. This could be because of the differences in the fungus, rates of disease progression and/or in life-history or physiological traits of the affected bat species between different regions. Infection of bats by G. destructans without associated mortality might also suggest that certain environmental conditions might have to co-occur with fungal infection to cause mortality. 3. We tested the environmental conditions hypothesis using Maxent to map and model landscape surface conditions associated with WNS mortality. This approach was unique in that we modelled possible requisite environmental conditions for disease mortality and not simply the presence of the causative agent. 4. The top predictors of WNS mortality were land use/land cover types, mean air temperature of wettest quarter, elevation, frequency of precipitation and annual temperature range. Model results suggest that WNS mortality is most likely to occur in landscapes that are higher in elevation and topographically heterogeneous, drier and colder during winter, and more seasonally variable than surrounding landscapes. 5. Synthesis and applications . This study mapped the most likely environmental surface conditions associated with bat mortality owing to WNS in the north-eastern United Sates; maps can be used for selection of priority monitoring sites. Our results provide a starting point from which to investigate and predict the potential spread and population impacts of this catastrophic emerging disease.

Journal of Applied Ecology↗

Late Quaternary evolution and stratigraphic framework influence on coastal systems along the north-central Gulf of Mexico, USA

Coastal systems in the Gulf of Mexico are threatened by reduced sediment supply, storm impacts and relative sea-level rise (RSLR). The geologic record provides insight into geomorphic evolution thresholds to these forcing mechanisms to help predict future barrier evolution in response to climate change. This study synthesizes ∼2100 km of geophysical data, 700 + sediment cores, and 62 radiocarbon dates to regionally map two lowstand sequence boundaries, multiple ravinement surfaces and fourteen depositional facies demonstrating stratigraphic and antecedent topographic influences on coastal evolution. The Mississippi-Alabama (MSAL) barriers are anchored by a marine isotope stage (MIS) 5e section of Dauphin Island coupled with an MIS 2 surface gradient change. Sand for the modern MSAL barriers were largely sourced through Holocene transgressive ravinement of relict valley fill deposits, providing up to 300 × 106 m3 of sand. Mud-filled MIS 2 tributaries correspond to areas of repeated storm breaching or tidal inlets. A Holocene geomorphic evolutionary model was created for Petit Bois and Dauphin Islands, highlighting RSLR rates, changes in sediment supply and the antecedent geologic framework. As the MIS 2 surface was flooded, tidal/wave scour supplied sand to migrating marine shoals. These transgressing shoals converted drowned paleovalleys to estuaries ∼9ka BP. Islands formed in their modern positions ∼6ka BP, when sediment supply was high and RSLR rates were 2 mm/yr. Between ∼4ka-1750 CE, islands prograded from reduced RSLR rates of 1-0.4 mm/yr and sufficient sand supply from alongshore/inner shelf sources. Currently, the islands experience 3.74 mm/yr of RSLR and reduced sediment supply, resulting in barrier degradation.

Alabama, Mississippi↗

Identification and extraction of the seaward edge of terrestrial vegetation using digital aerial photography

This report is created as part of the Aerial Data Collection and Creation of Products for Park Vital Signs Monitoring within the Northeast Region Coastal and Barrier Network project, which is a joint project between the National Park Service Inventory and Monitoring Program (NPS-IM), the National Aeronautics and Space Administration (NASA) Observational Sciences Branch, and the U.S. Geological Survey (USGS) Center for Coastal and Watershed Studies (CCWS). This report is one of a series that discusses methods for extracting topographic features from aerial survey data. It details step-by-step methods used to extract a spatially referenced digital line from aerial photography that represents the seaward edge of terrestrial vegetation along the coast of Assateague Island National Seashore (ASIS). One component of the NPS-IM/USGS/NASA project includes the collection of NASA aerial surveys over various NPS barrier islands and coastal parks throughout the National Park Service's Northeast Region. These aerial surveys consist of collecting optical remote sensing data from a variety of sensors, including the NASA Airborne Topographic Mapper (ATM), the NASA Experimental Advanced Airborne Research Lidar (EAARL), and down-looking digital mapping cameras.

Open-File Report↗

Apollo lunar sounder experiment

The scientific objectives of the Apollo lunar sounder experiment (ALSE) are (1) mapping of subsurface electrical conductivity structure to infer geological structure, (2) surface profiling to determine lunar topographic variations, (3) surface imaging, and (4) measuring galactic electromagnetic radiation in the lunar environment. The ALSE was a three-frequency, wide-band, coherent radar system operated from lunar orbit during the Apollo 17 mission.

Book chapter↗

Geologic map of the Agnesi quadrangle (V-45), Venus

The Agnesi quadrangle (V&ndash;45), named for centrally located Agnesi crater, encompasses approximately 6,500,000 km 2 extending from lat 25&deg; to 50&deg; S. and from long 30&deg; to 60&deg; E. The V&ndash;45 quadrangle lies within Venus&rsquo; lowland broadly between highlands Ovda Regio to the northeast and Alpha Regio to the west. The region ranges in altitude from 6,051 to 6,054 km, with an average of ~6,052 km, which is essentially mean planetary radius. The quadrangle displays a wide range of features including large to small arcuate exposures of ribbon-tessera terrain (Hansen and Willis, 1998), ten lowland coronae, two montes, 13 pristine impact craters, and long but localized volcanic flows sourced to the west in V&ndash;44. Shield terrain (Hansen, 2005) occurs across much of the V&ndash;45 quadrangle. Although V&ndash;45 lies topographically within the lowland, it includes only one planitia (Fonueha Planitia), perhaps because the features mentioned decorate it. Geologic mapping of the Agnesi quadrangle (V&ndash;45) provides an opportunity (1) to examine the nature of lowland ribbon-tessera terrain, as compared to highland ribbon-tessera terrain; (2) to examine the nature and history of lowland coronae and montes to evaluate hypotheses for the evolution of these features; and (3) to evaluate global catastrophic/episodic resurfacing hypotheses. Ribbon-tessera terrain (Hansen and Willis, 1998), a structurally distinctive terrain marked by roughly orthogonal fold axes and ribbon troughs, characterizes Venusian crustal plateaus (Hansen and others, 1999), although this distinctive fabric is also variably preserved across some lowland regions (Hansen and Willis, 1996, 1998), including the Agnesi quadrangle. Isolated kipukas of ribbon-tessera terrain protrude through the shield-terrain veneer and preserve evidence of local surface processes that predated shield-terrain emplacement, including those leading to regional development of tessera terrain fabrics. The ribbon-tessera fabrics are similar to the fabrics that characterize high-standing crustal plateaus, such as nearby Ovda and Alpha Regiones. Ribbon-bearing kipukas may preserve evidence of ancient collapsed crustal plateaus (Phillips and Hansen, 1994; Ivanov and Head, 1996; Hansen and Willis, 1998; Ghent and Tibuleac, 2002), or they may record different, but rheologically similar, processes. Geologic mapping of the V&ndash;45 quadrangle constrains the geologic history of 12 lowland coronae and montes. Lowland coronae are relatively rare (10% of coronae); they do not form chains, typical of mesoland coronae (Phillips and Hansen, 1994), nor do they cluster, typical of highland coronae associated with volcanic rises (Stofan and others, 2001). The evolution of all coronae, whether by a single mechanism or a range of mechanisms, is a topic of debate (for example, Stofan and others, 1992, 2001; Vita-Finzi and others, 2005; Hamilton, 2005). The V&ndash;45 quadrangle hosts about 20 percent of the lowland coronae on Venus; the geologic history of these features should provide critical insight toward understanding coronae evolution. Two general classes of hypotheses have emerged to address the near random spatial distribution of ~970 apparently pristine impact craters across the surface of Venus: (1) catastrophic/episodic resurfacing and (2) equilibrium/evolutionary resurfacing. Catastrophic/episodic hypotheses propose that a global-scale, temporally punctuated event or events dominated Venus&rsquo; evolution and that the generally uniform impact crater distribution (Schaber and others, 1992; Phillips and others, 1992; Herrick and others, 1997) reflects craters that accumulated during relative global quiescence since that event (for example, Strom and others, 1994; Herrick, 1994; Turcotte and others, 1999). Equilibrium/evolutionary hypotheses suggest instead that the near random crater distribution results from relatively continuous, but spatially localized, resurfacing in which volcanic and (or) tectonic processes occur across the planet through time, although the style of operative processes may have varied temporally and spatially (for example, Phillips and others, 1992; Guest and Stofan, 1999; Hansen and Young, 2007). Geologic relations within the map area allow us to test the catastrophic/episodic versus equilibrium/evolutionary resurfacing hypotheses.

Scientific Investigations Map↗

Pyroclastic flow hazard at Volcán Citlaltépetl

Volc&aacute;n Citlalt&eacute;petl (Pico de Orizaba) with an elevation of 5,675 m is the highest volcano in North America. Its most recent catastrophic events involved the production of pyroclastic flows that erupted approximately 4,000, 8,500, and 13,000 years ago. The distribution of mapped deposits from these eruptions gives an approximate guide to the extent of products from potential future eruptions. Because the topography of this volcano is constantly changing computer simulations were made on the present topography using three computer algorithms: energy cone, FLOW2D, and FLOW3D. The Heim Coefficient (&mu;), used as a code parameter for frictional sliding in all our algorithms, is the ratio of the assumed drop in elevation (H) divided by the lateral extent of the mapped deposits (L). The viscosity parameter for the FLOW2D and FLOW3D codes was adjusted so that the paths of the flows mimicked those inferred from the mapped deposits. We modeled two categories of pyroclastic flows modeled for the level I and level II events. Level I pyroclastic flows correspond to small but more frequent block-and-ash flows that remain on the main cone. Level II flows correspond to more widespread flows from catastrophic eruptions with an approximate 4,000-year repose period. We developed hazard maps from simulations based on a National Imagery and Mapping Agency ( NIMA ) DTED-1 DEM with a 90 m grid and a vertical accuracy of &plusmn;30 m. Because realistic visualization is an important aid to understanding the risks related to volcanic hazards we present the DEM as modeled by FLOW3D. The model shows that the pyroclastic flows extend for much greater distances to the east of the volcano summit where the topographic relief is nearly 4,300 m. This study was used to plot hazard zones for pyroclastic flows in the official hazard map that was published recently.

Natural Hazards↗

Geologic map and structure sections along the southern part of the Bartlett Springs Fault Zone and adjacent areas from Cache Creek to Lake Berryessa, northern Coast Ranges, California

Introduction Located in the Coast Ranges of northern California, the Bartlett Springs Fault Zone is the easternmost fault in the San Andreas Fault system in northern California. The fault is a right-lateral, strike-slip structure considered capable of producing an earthquake of moment magnitude 7. The purpose of this mapping is to better characterize the geology and earthquake hazards associated with the southern part of the Bartlett Springs Fault Zone and to help identify any evidence of active uplift on the faults bounding the Coast Ranges. Although the area immediately surrounding the Bartlett Springs Fault Zone is sparsely populated, its southern segment presents a potential seismic hazard to northern California communities as far away as the San Francisco Bay region and Sacramento. There are also nearby water resources, mineral resources, and public lands used for public recreation. The Coast Ranges of northern California are a series of northwest-southeast-oriented mountain ranges and valleys located north of the San Francisco Bay region, between the Pacific Ocean to the west and the Sacramento Valley to the east. The region has rugged terrain, high mountain peaks that reach more than 2,400 meters above sea level, isolated and narrow valley bottoms on which most human settlements are located, and large drainage systems that tend to follow the northwest-southeast-oriented topographic grain. The physiographic character of the region is shaped by its bedrock geology, deformational history, and active faulting. The basement rocks of the northern Coast Ranges consist of the Franciscan Complex and the Great Valley complex, the latter of which consists of two informal units, the Coast Range ophiolite and the Great Valley sequence. The Franciscan Complex and the Great Valley complex are in structural contact along the Coast Range Fault, a regional-scale structure and fundamental crustal boundary. The Franciscan Complex and the Great Valley complex are superposed by active, northwest-southeast-striking strike-slip faults that are associated with seismicity swarms. These active strike-slip faults can produce moderate to large earthquakes that have moment magnitudes of 7–8. In places, these active structures bound large ranges and valleys, suggesting that much of the modern topographic expression is the result of active deformation processes. This report contains new 1:24,000-scale geologic mapping along the southern part of the Bartlett Springs Fault Zone between Clear Lake and Lake Berryessa. The map area spans 738 square kilometers in northern Napa County, southern Lake County, and parts of Yolo and Colusa Counties. The south and east borders of the map are 90 kilometers north of San Francisco and 70 kilometers west of Sacramento, respectively. The map area is within the Knoxville mining district, which has a history of mercury and gold mining dating back to the mid-19th century. The two main towns in the region, Lower Lake and Clearlake, California, are west-northwest of the map area. Approximately 71,000 people live in the cities and rural communities located within a 40-kilometer radius of the center of the map area. The bedrock geology, cross sections, and structural data presented herein are critical for evaluating the long-term evolution of the Bartlett Springs Fault Zone. This work will supplement studies on local seismic hazards, liquefaction potential, landslide hazards, earthquake geology, natural resources, groundwater resources, engineering geology, and tectonic history by providing the background information for site-specific investigations on these subjects.

California↗

An analysis of spatial relation predicates in U.S. Geological Survey feature definitions

The Semantic Web uses a data model called a triple, which consists of a subject -predicate - object structure. When represented as triples, geospatial data require a spatial relation term to serve as the predicate linking two spatial features. This document summarizes the approaches and procedures used during the identification of spatial relationships common between topographic features using terms from topographic data standards. This project identified verb-predicate arguments that could be used in the creation of data triples and ontologies for The National Map of the U.S. Geological Survey and also investigated the possibility of deriving ontology from predefined textual definitions. The primary purpose of this report is to present the data used for subsequent analysis. A summary of terms organized by basic categories is provided. Keywords: semantic technology, geospatial relations, topographic data

Open-File Report↗

Topographic, climatic, and age controls on the reworking of volcanic debris avalanche deposits

Volcanic debris avalanches have deposited as much as 1000 km 3 of largely unconsolidated material on landscapes and remodeled existing drainage networks. The landscape disturbances created by these events pose severe, cascading downstream sedimentation hazards that can require long-term societal management, as demonstrated by decades of observations and ongoing interventions after the deposition of the 1980 debris avalanche of Mount St. Helens (United States). There, post-emplacement sediment yields caused by deposit erosion remain several times above estimated background yield and lakes impounded by the deposit still pose threats of downstream flooding. Despite the length and quality of measurements of the geomorphic evolution and consequent sediment release at Mount St. Helens, the long-term trajectory of drainage network evolution across, and the associated sediment release from, large volcanic debris avalanches remains uncertain. Observations and modeling at Mount St. Helens, however, indicate channel instability can persist many decades and may persist for centuries to millennia. We examined potential influences on the erosion and preservation of volcanic debris avalanche deposits (VDADs) by mapping valley networks developed on 89 VDADs selected from volcanic arcs across the world and spanning a variety of topographic settings and climate regimes. Using the best available topographic data (1 m lidar to 30 m radar-derived data depending on location) and aerial imagery, we estimated the areas of deposits that have been reworked relative to initial deposit footprints as a proxy for post-emplacement erosion. We found that a primary influence on reworking is the topographic confinement of the VDAD: confined, valley-filling deposits are systematically more reworked than unconfined deposits. There is no apparent relationship between deposit age and reworking for valley-filling deposits, indicating that drainage networks on deposits in confined topographic settings like at Mount St. Helens reform rapidly after emplacement. In contrast, our data indicate that the reworking of unconfined deposits has a monotonic positive relationship with age. This observation agrees with a conceptual model of channel formation at Mount Taranaki (New Zealand), which posits that an unconfined VDAD created a topographic high that initially (e.g., 2–8 ky for the Pungarehu formation at Taranaki) diverted erosion to the deposit margins. We found only a weak to moderate relationship between reworking and modern precipitation regimes, which may reflect differences between modern and paleo-precipitation conditions at many of our study sites. We also found no correlation between the size (surface area or volume) of deposits and the degree of reworking. The work presented here implies that downstream cascading sediment hazards from landscape-resetting processes like VDADs (such as thick, extensive pyroclastic flow deposits) depend on the relief and organization of the surrounding landscape.

Washington↗

Nature, distribution, and origin of Titan’s Undifferentiated Plains

The Undifferentiated Plains on Titan, first mapped by Lopes et al. (Lopes, R.M.C. et al., 2010. Icarus, 205, 540–588), are vast expanses of terrains that appear radar-dark and fairly uniform in Cassini Synthetic Aperture Radar (SAR) images. As a result, these terrains are often referred to as “blandlands”. While the interpretation of several other geologic units on Titan – such as dunes, lakes, and well-preserved impact craters – has been relatively straightforward, the origin of the Undifferentiated Plains has remained elusive. SAR images show that these “blandlands” are mostly found at mid-latitudes and appear relatively featureless at radar wavelengths, with no major topographic features. Their gradational boundaries and paucity of recognizable features in SAR data make geologic interpretation particularly challenging. We have mapped the distribution of these terrains using SAR swaths up to flyby T92 (July 2013), which cover >50% of Titan’s surface. We compared SAR images with other data sets where available, including topography derived from the SARTopo method and stereo DEMs, the response from RADAR radiometry, hyperspectral imaging data from Cassini’s Visual and Infrared Mapping Spectrometer (VIMS), and near infrared imaging from the Imaging Science Subsystem (ISS). We examined and evaluated different formation mechanisms, including (i) cryovolcanic origin, consisting of overlapping flows of low relief or (ii) sedimentary origins, resulting from fluvial/lacustrine or aeolian deposition, or accumulation of photolysis products created in the atmosphere. Our analysis indicates that the Undifferentiated Plains unit is consistent with a composition predominantly containing organic rather than icy materials and formed by depositional and/or sedimentary processes. We conclude that aeolian processes played a major part in the formation of the Undifferentiated Plains; however, other processes (fluvial, deposition of photolysis products) are likely to have contributed, possibly in differing proportions depending on location.

Icarus↗

High-Resolution Aeromagnetic Survey To Image Shallow Faults, Poncha Springs and Vicinity, Chaffee County, Colorado

High-resolution aeromagnetic data were acquired over the town of Poncha Springs and areas to the northwest to image faults, especially where they are concealed. Because this area has known hot springs, faults or fault intersections at depth can provide pathways for upward migration of geothermal fluids or concentrate fracturing that enhances permeability. Thus, mapping concealed faults provides a focus for follow-up geothermal studies. Fault interpretation was accomplished by synthesizing interpretative maps derived from several different analytical methods, along with preliminary depth estimates. Faults were interpreted along linear aeromagnetic anomalies and breaks in anomaly patterns. Many linear features correspond to topographic features, such as drainages. A few of these are inferred to be fault-related. The interpreted faults show an overall pattern of criss-crossing fault zones, some of which appear to step over where they cross. Faults mapped by geologists suggest similar crossing patterns in exposed rocks along the mountain front. In low-lying areas, interpreted faults show zones of west-northwest-, north-, and northwest-striking faults that cross ~3 km (~2 mi) west-northwest of the town of Poncha Springs. More easterly striking faults extend east from this juncture. The associated aeromagnetic anomalies are likely caused by magnetic contrasts associated with faulted sediments that are concealed less than 200 m (656 ft) below the valley floor. The faults may involve basement rocks at greater depth as well. A relatively shallow (<300 m or <984 ft), faulted basement block is indicated under basin-fill sediments just north of the hot springs and south of the town of Poncha Springs.

Open-File Report↗

Simulation of the regional groundwater-flow system in the St. Louis River basin, Minnesota

The St. Louis River Basin (SLRB) covers 3,600 square miles in northeastern Minnesota, with headwaters in the Mesabi Range and extensive wetlands and lakes throughout the basin. To better understand the regional groundwater system in the SLRB, a two-dimensional, steady-state groundwater-flow model of the SLRB was developed by the U.S. Geological Survey, in cooperation with the Minnesota Ojibwe Bands, using the analytic-element computer code GFLOW. The parameter-estimation software suite PEST was used to obtain a best fit of the modeled to measured groundwater levels and streamflows. The calibrated regional model was locally refined to create a smaller version of the model, the central SLRB model, that was used to evaluate hydrologic effects from extensive ditching in wetlands of the central SLRB. The refinements included adding ditches that were not represented in the regional model and modifying the aquifer base elevation to be more representative of the localized area. The central SLRB model was recalibrated to better match the distribution of mapped wetlands. Two scenarios were run of the central SLRB model: one with ditches and one without ditches. The model results were compared between the two scenarios to assess the effect of ditching on the groundwater system and potential changes to hydrologic conditions that support wetlands. Calibration of the regional SRLB model resulted in average horizontal hydraulic conductivity values of 6–39 feet per day for the glacial deposits and 3–4 feet per day for the uppermost fractured bedrock in the Biwabik Iron-Formation on the Mesabi Range. Average recharge across the calibrated model was 5.9 inches per year. Linesink resistance for the routed stream network was calibrated by using resistance categories based on the mapped soil hydrologic groups. The modeled regional groundwater-flow direction was generally to the south near the Mesabi Range topographic high and south or southwest across the rest of the basin. The updated calibration of the central SLRB model resulted in average horizontal hydraulic conductivity values of 5–36 feet per day for the glacial deposits and 3 feet per day for the uppermost fractured Biwabik Iron-Formation of the Mesabi Range. Average recharge across the ditch scenarios was 4.1 inches per year. Comparison of the preditch and postditch model scenarios showed that ditching reduced the area where the modeled water table was within 1 foot of the land surface (a wetland hydrology indicator) in as much as 40,000 acres, or 37 percent, of mapped permanent wetlands in the SLRB. An increase in the depth to the water table in wetland areas has the potential to degrade wetland persistence or function.

Minnesota↗

Vulnerability of different Colorado Plateau land types to drivers of change

Public lands are challenged by a range of pressures—changing climate, increasing visitation, resource extraction—and their effects can span spatial scales, often crossing land management jurisdictional boundaries. Research approaches which explicitly span jurisdictions can support strategies to contend with regional pressures. We assess management-relevant drivers of change—aridification, livestock grazing, invasive species, surface disturbance, and fire—across a patchwork of land management units and agencies on the Colorado Plateau, focusing on southeastern Utah, USA. We use vulnerability analysis, first evaluating exposure to drivers across the landscape, then quantifying sensitivity to each driver across different land types, defined by mapped Ecological Site Groups, a system for classifying landscapes according to physical factors including climate, soils, and topographic setting. We address the questions: 1) how are drivers spatially distributed across the study region; and, 2) based on exposure and sensitivity, are certain land types more vulnerable to these drivers? We find that the study region has high exposure and sensitivity—and thus high vulnerability—to aridification and grazing, but low exposure and vulnerability to other drivers. Although more sensitive land types were not generally more exposed, identifying which areas are most sensitive can guide adaptive measures, like where new uses or disturbances would be least harmful and which areas could be prioritized for restoration. The method we demonstrate is a flexible tool for assessing landscape-scale impacts, is built on nationally available datasets, and can be tailored to different datasets and sensitivity metrics.

Utah↗

Character of shell beds flanking Herod Point Shoal, southeastern Long Island Sound, New York

High biogenic productivity, strong tidal currents, shoal topography, and short transport distances combine to favor shell-bed formation along the lower flanks of a cape-associated shoal off Herod Point on Long Island, New York. This shell bed has a densely packed, clast-supported fabric composed largely of undegraded surf clam ( Spisula solidissima ) valves. It is widest along the central part of the western flank of the shoal where topographic gradients are steep and a stronger flood tide results in residual flow. The bed is narrower and thinner toward the landward margins where currents are too weak to transport larger valves and topographic gradients are gentle, limiting bed-load transport mechanisms by which the shells are concentrated. Reconnaissance mapping off Roanoke Point suggests that shell beds are also present at the other cape-associated shoals off northeastern Long Island, where relatively similar geomorphic and oceanographic conditions exist. These shell beds are important to the Long Island Sound ecosystem because they provide complex benthic habitats of rough and hard substrates at the boundary between the muddy basin floor and mobile sand of the shoals.

Connecticut, New York↗

Geologic map of the Artemis Chasma quadrangle (V-48), Venus

Artemis, named for the Greek goddess of the hunt, represents an approximately 2,600 km diameter circular feature on Venus, and it may represent the largest circular structure in our solar system. Artemis, which lies between the rugged highlands of Aphrodite Terra to the north and relatively smooth lowlands to the south, includes an interior topographic high surrounded by the 2,100-km-diameter, 25- to 200-km-wide, 1- to 2-km-deep circular trough, called Artemis Chasma, and an outer rise that grades outward into the surrounding lowland. Although several other chasmata exist in the area and globally, other chasmata have generally linear trends that lack the distinctive circular pattern of Artemis Chasma. The enigmatic nature of Artemis has perplexed researchers since Artemis Chasma was first identified in Pioneer Venus data. Although Venus' surface abounds with circular to quasi-circular features at a variety of scales, including from smallest to largest diameter features: small shield edifices (>1 km), large volcanic edifices (100-1,000 km), impact craters (1-270 km), coronae (60-1,010 km), volcanic rises and crustal plateaus (~1,500-2,500 km), Artemis defies classification into any of these groups. Artemis dwarfs Venus' largest impact crater, Mead (~280 km diameter); Artemis also lacks the basin topography, multiple ring structures, and central peak expected for large impact basins. Topographically, Artemis resembles some Venusian coronae; however Artemis is an order of magnitude larger than the average corona (200 km) and about twice the size of Heng-O Corona (which is 1,010 km in diameter), the largest of Venusian coronae. In map view Artemis' size and shape resemble volcanic rises and crustal plateaus; however, both of these classes of features differ topographically from Artemis. Volcanic rises and crustal plateaus form broad domical regions, and steep-sided regions with flat tops, respectively; furthermore, neither rises nor plateaus include circular troughs. So although it seems clear what Artemis is not, there is little consensus about what Artemis is, much less how Artemis formed. Debate during the past decade has resulted in the proposal of at least four hypotheses for Artemis' formation. The first (herein referred to as H1) is that Artemis Chasma represents a zone of northwest-directed convergence and subduction. The second hypothesis (herein referred to as H2) is that Artemis consists of a composite structure with a part of its interior region marking the exposure of deformed ductile deep-crustal rocks analogous to a terrestrial metamorphic core complex. The third (herein referred to as H3) is that Artemis reflects the surface expression of an ancient (>3.5 Ga) huge bolide impact event on cold strong lithosphere. The fourth hypothesis (herein referred to as H4) is that Artemis marks the surface expression of a deep mantle plume. Each of these hypotheses holds different implications for Venus geodynamics and evolution processes, and for terrestrial planet processes in general. Viability of H1 would provide support that terrestrial-like plate-tectonic processes once occurred on Earth's sister planet. The feasibility of H2 would require high values of crustal extension and therefore imply that significant horizontal displacements occurred on Venus-displacement that may or may not be related to terrestrial-like plate-tectonic processes. The possibility of H3 would suggest that Venus' surface is extremely old, and that Venus has experienced very little dynamic activity for the last 3.5 billion years or more; this would further imply that Venus is essentially tectonically dead, and has been for most of its history. This view contrasts strongly with studies that highlight a rich history of Venus including activity at least as young as 750 million years ago, and quite likely up to the present. If H4 has credibility, then Artemis could provide clues to cooling mechanisms of Earth's sister planet. Each of these hypotheses

Scientific Investigations Map↗