USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geological & Geophysical Surveys”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55Linked to original sources
USGS2015

Understanding natural capital

This chapter serves to introduce the geophysics of Neotropical steeplands. Topics are covered in a general manner with hyperlinks to active research and monitoring sites (such as the National Hurricane Center and US Geological Survey publication). Topics covered include ‘tropical climate and weather,’ ‘climate variations and trends,’ Neotropical ‘geology, and soils,’ ‘hillslopes and erosion,’ ‘lakes and reservoirs,’ and ‘effects of land cover on water quality and quantity.’ Obviously, this is a lot of information to cover in a short chapter, hence the use of hyperlinks. The last theme ‘effects of land cover on water quality and quantity’ is covered by case studies, in all of which I have been centrally involved. These studies were chosen because they are among the few studies with sufficient data of high enough quality to reach definitive conclusions.

Book chapter↗
USGS2016

Statistical analysis of lake levels and field study of groundwater and surface-water exchanges in the northeast Twin Cities Metropolitan Area, Minnesota, 2002 through 2015: Chapter A of Water levels and groundwater and surface-water exchanges in lakes of the northeast Twin Cities Metropolitan Area, Minnesota, 2002 through 2015

Water levels declined from 2003 to 2011 in many lakes in Ramsey and Washington Counties in the northeast Twin Cities Metropolitan Area, Minnesota; however, water levels in other northeast Twin Cities Metropolitan Area lakes increased during the same period. Groundwater and surface-water exchanges can be important in determining lake levels where these exchanges are an important component of the water budget of a lake. An understanding of groundwater and surface-water exchanges in the northeast Twin Cities Metropolitan Area has been limited by the lack of hydrologic data. The U.S. Geological Survey, in cooperation with the Metropolitan Council and Minnesota Department of Health, completed a field and statistical study assessing lake-water levels and regional and local groundwater and surface-water exchanges near northeast Twin Cities Metropolitan Area lakes. This report documents the analysis of collected hydrologic, water-quality, and geophysical data; and existing hydrologic and geologic data to (1) assess the effect of physical setting and climate on lake-level fluctuations of selected lakes, (2) estimate potential percentages of surface-water contributions to well water across the northeast Twin Cities Metropolitan Area, (3) estimate general ages for waters extracted from the wells, and (4) assess groundwater inflow to lakes and lake-water outflow to aquifers downgradient from White Bear Lake. Statistical analyses of lake levels during short-term (2002–10) and long-term (1925–2014) periods were completed to help understand lake-level changes across the northeast Twin Cities Metropolitan Area. Comparison of 2002–10 lake levels to several landscape and geologic characteristics explained variability in lake-level changes for 96 northeast Twin Cities Metropolitan Area lakes. Application of several statistical methods determined that (1) closed-basin lakes (without an active outlet) had larger lake-level declines than flow-through lakes with an outlet; (2) closed-basin lake-level changes reflected groundwater-level changes in the Quaternary, Prairie du Chien, and Jordan aquifers; (3) the installation of outlet-control structures, such as culverts and weirs, resulted in smaller multiyear lake-level changes than lakes without outlet-control structures; (4) water levels in lakes primarily overlying Superior Lobe deposits were significantly more variable than lakes primarily overlying Des Moines Lobe deposits; (5) lake-level declines were larger with increasing mean lake-level elevation; and (6) the frequency of some of these characteristics varies by landscape position. Flow-through lakes and lakes with outlet-control structures were more common in watersheds with more than 50 percent urban development compared to watersheds with less than 50 percent urban development. A comparison of two 35-year periods during 1925–2014 revealed that variability of annual mean lake levels in flow-through lakes increased when annual precipitation totals were more variable, whereas variability of annual mean lake levels in closed-basin lakes had the opposite pattern, being more variable when annual precipitation totals were less variable. Oxygen-18/oxygen-16 and hydrogen-2/hydrogen-1 ratios for water samples from 40 wells indicated the well water was a mixture of surface water and groundwater in 31 wells, whereas ratios from water sampled from 9 other wells indicated that water from these wells receive no surface-water contribution. Of the 31 wells with a mixture of surface water and groundwater, 11 were downgradient from White Bear Lake, likely receiving water from deeper parts of the lake. Age dating of water samples from wells indicated that the age of water in the Prairie du Chien and Jordan aquifers can vary widely across the northeast Twin Cities Metropolitan Area. Estimated ages of recharge for 9 of the 40 wells sampled for chlorofluorocarbon concentrations ranged widely from the early 1940s to mid-1970s. The wide range in estimated ages of recharge may have resulted from the wide range in the open-interval lengths and depths for the wells. Results from stable isotope analyses of water samples, lake-sediment coring, continuous seismic-reflection profiling, and water-level and flow monitoring indicated that there is groundwater inflow from nearshore sites and lake-water outflow from deep-water sites in White Bear Lake. Continuous seismic-reflection profiling indicated that deep sections of White Bear, Pleasant, Turtle, and Big Marine Lakes have few trapped gases and little organic material, which indicates where groundwater and lake-water exchanges are more likely. Water-level differences between White Bear Lake and piezometer and seepage measurements in deep waters of the lake indicate that groundwater and lake-water exchange is happening in deep waters, predominantly downgradient from the lake and into the lake sediment. Seepage fluxes measured in the nearshore sites of White Bear Lake generally were higher than seepage fluxes measured in the deep-water sites, which indicates that groundwater-inflow rates at most of the nearshore sites are higher than lake-water outflow from the deep-water sites.

Minnesota↗
USGS2021

Geohydrologic and water-quality characterization of a fractured-bedrock test hole in an area of Marcellus Shale gas development, Sullivan County, Pennsylvania

The stratigraphy, water-bearing zones, and quality of groundwater were characterized in a 1,400-ft-deep test hole drilled during 2013 in fractured bedrock in Sullivan County, Pa., by collection and analysis of measurements made during drilling, geophysical logs, and depth-specific hydraulic tests and water samples. The multidisciplinary characterization of the test hole was a cooperative effort between the Pennsylvania Department of Natural Resources, Bureau of Geological Survey (BGS), and the U.S. Geological Survey (USGS). The study provided information to aid the bedrock mapping of the Laporte 7.5-minute quad-rangle by BGS to help quantify the depth and character of fresh and saline groundwater in an area of shale-gas exploration (described in this report), which could help gas operators protect groundwater resources. The Laporte test hole was drilled with air-hammer methods in an upland setting in the headwaters of Loyalsock Creek in the Glaciated High Plateau section of the Appalachian Plateaus physiographic province. Bedrock residuum and till were penetrated from land surface to 8.5 ft, the Huntley Mountain Formation of Mississippian and Devonian age was penetrated from 8.5 to 540 ft, and the Catskill Formation of Devonian age was penetrated from 540 to 1,400 ft. Fractures, determined from optical televiewer, acoustic televiewer, and video logs, were commonly encountered to 200 ft bls (below land surface), then decreased exponentially with depth, except at a highly fractured zone from 637 to 644 ft bls. Most fractures were along bedding planes and had a strike of about 243 degrees and dip about 4 degrees to the northwest, consistent with the test-hole location on the north limb of the Muncy Creek anticline. Few fractures were noted below 650 ft. The depths of fresh and saline water-bearing fracture zones were identified in the test hole by geophysical-log analysis and were verified by pumping samples from zones isolated with packers and by collecting samples in the open hole with a wire-line point sampler. Six water-bearing zones associated with single or multiple fractures were identified at depths of 130–135, 180, 267–275, 425, 637–644, and 1,003 ft bls. Under ambient conditions, fresh water entered the hole from fractures at 130-135 and 180 ft bls, flowed downward and exited at fractures from 267–275, 425, and 637–644 ft. When pumped at 16.2 gal/min, most of the water from the open test hole was contributed from the fracture at 180 ft bls. Transmissivity, estimated from analysis of the specific-capacity data and flowmeter logs, is about 850 ft 2 /d for the entire open hole, and about 60 percent of the transmissivity is contributed from the fracture zone at 180 ft bls. The hydraulic heads in the deep water-bearing zones at 425 and 637–644 ft were about 100 ft lower than hydraulic heads in shallow water-bearing zones at 180 ft bls and above, indicating a large downward vertical hydraulic gradient. Water samples pumped from fracture zones isolated by packers at and above the water-bearing zone at 450 ft bls were fresh with dissolved-solids contents of 105 mg/L or less. The sample isolated at 637–644 ft bls was probably affected by leakage around packers, but the specific-conductance samples collected during drilling that were believed to be representa-tive of the fracture zone at 637–644 ft bls indicated slightly saline water. Below the 637–644 ft zone, a flowmeter log in the open hole did not detect any vertical flow, and the temperature log approached the geothermal gradient, indicating little ambient fluid flow and minimal fracture transmissivity below this depth. A petrophysical-log analysis using estimates of formation water resistivity from Archie’s Equation indicated an apparent transition from fresh to saline water in the sandstones occurs between 450 to 900 ft bls, with saline water indicated below 900 ft. Small seeps of saline water were delineated at 958, 989, and 1,003 ft bls by a time series of specific-conductance logs, and a discrete-point water sample at 990 ft bls with total dissolved-solids concentration of 19,900 mg/L verified that highly saline water was present below 900 ft bls. Occurrence of saline water at a depth of about 900 ft bls is below altitude of streams within 3 to 5 miles of the test hole but is about 930 ft above the altitude at the mouth of Loyalsock Creek where is enters the West Branch Susquehanna River at Montours-ville, Pa. The depth to saline water in this test hole is close to depths estimated at two other deep test holes drilled by the BGS in upland settings in Bradford and Tioga Counties in north-ern Pennsylvania. The saline water from 990 ft bls had a chemical composition similar to Appalachian Basin brines that had been diluted with fresh water. Predominant ions in the saline water were sodium, chloride, and calcium. Trace constituents of strontium, bromide, barium, lithium, and molybdenum were all more than 5,000 times greater than in freshwater samples from 167 or 270 ft bls. Methane concentration in the saline water sample from 990 ft was 120 mg/L. The concentration ratios of methane to higher-chain hydrocarbon gases and isotopic ratios of 13 C/ 12 C and 2 H/ 1 H of methane indicate that the gases are likely of thermogenic origin. In the sample from 990 ft bls, the 13 C/ 12 C of methane was less negative (-34.81 per mil) than 13 C/ 12 C of ethane (-37.1 per mil). Isotopic reversals such as this are generally found in gases from rocks older than the Catskill Formation, so its recognition in a natural upland setting at relatively shallow depth could be important when interpreting isotopic results to identify the origin of stray gas in the area.

Pennsylvania↗
USGS1996

Selected hydrogeologic data from the Cedar Rapids Area, Benton and Linn counties, Iowa, October 1992 through March 1996

The city of Cedar Rapids, Iowa, obtains its water supply from shallow wells screened in the alluvial aquifer along the Cedar River. A cooperative study between the city of Cedar Rapids, Iowa, and the U.S. Geological Survey was started in March 1992 to assess the water quality and water quantity of the ground-water resource. This report summarizes selected hydrogeologic data collected from October 1992 through March 1996. Information collected includes water quality (major ions, nutrients, and pesticides), ground-water levels, multiprobe-instrument data (water levels, specific conductance, pH, water temperature, and dissolved oxygen monitored at 15-, 30-, or 60-minute intervals), well information (location, casing type, screen interval, and depth), and geophysical seismic-refraction and seismic-reflection data (estimated depth to bedrock and alluvial thickness along the Cedar River). Geologic, hydrologic, and water-quality data were collected from domestic, municipal, observation, and industrial wells and the Cedar River. Well-construction data for more than 300 wells in the Cedar Rapids area in Benton and Linn Counties, Iowa, were compiled primarily from records on file with the Iowa Department of Natural Resources, Geologic Survey Bureau (Iowa City).

Iowa↗
USGS1983

Preliminary results of spectral induced polarization measurements, Wadi Bidah District, Kingdom of Saudi Arabia

Laboratory spectral induced polarization (SIP) measurements on 29 carbonaceous schist samples from the Wadi Bidah district show that most are associated with very long polarization decays or, equivalently, large time constants. In contrast, measurements on two massive sulfide samples indicate shorter polarization decays or smaller time constants. This difference in time constants for the polarization process results in two differences in the phase spectra in the frequency range of from 0.06 to 1Hz. First, phase values of carbonaceous rocks generally decrease as a function of increasing frequency. Second, phase values of massive sulfide-bearing rocks increase as a function of increasing frequency. These results from laboratory measurements agree well with those from other reported SIP measurements on graphites and massive sulfides from the Canadian Shield. Four SIP lines, measured by using a 50-m dipole-dipole array, were surveyed at the Rabathan 4 prospect to test how well the results of laboratory sample measurements can be applied to larger scale field measurements. Along one line, located entirely over carbonaceous schists, the phase values decreased as a function of increasing frequency. Along a second line, located over both massive sulfides and carbonaceous schists as defined by drilling, the phase values measured over carbonaceous schists decreased as a function of increasing frequency, whereas those measured over massive sulfides increased. In addition, parts of two lines were surveyed down the axes of the massive sulfide and carbonaceous units. The phase values along these lines showed similar differences between the carbonaceous schists and massive sulfides. To date, the SIP survey and the SIP laboratory measurements have produced the only geophysical data that indicate an electrical difference between the massive sulfide-bearing rocks and the surrounding carbonaceous rocks in the Wadi Bidah district. However, additional sample and field measurements in areas of known mineralization would fully evaluate the SIP method as applied to various geologic environments and styles of massive sulfide mineralization. Additionally, the efficiency of SIP surveys in delineating areas of sulfide mineralization might be improved by surveying lines down the axes of known electrical conductors. An evaluation of the applied research done on the SIP method to date suggests that this technique offers significant exploration applications to massive sulfide exploration in the Kingdom of Saudi Arabia.

Open-File Report↗
USGS2014

Results to be expected from resistivity‐measurements

The work described in this paper was all done in connection with dam‐site investigations and was not directly connected with hydrology. However, geophysics is coming to have a place in hydrologic investigations, and these results may throw some light on what can be accomplished by resistivity‐measurements. We have found that,for many questions not involving exact determinations of depth, resistivity‐ measurements give conclusive answers. Ordinarily a reliable answer can be expected to the question of the existence of a buried channel if the covering is composed of unconsolidated material with a resistivity differing from that of the rock. For example, topographic surveys were made at two alternative dam‐sites on a river about four miles apart. Examination of the surface‐geology indicated that a channel burled under glacial debris possibly existed at each site, but resistivity‐measurements proved that such a channel existed at one site and not at the other. On the other hand, at another site the geologist suspected there might be an old channel on a steep side hill. Geophysical measurements showed a depth of overburden of 46 feet and showed that if a deeper channel exists it must be narrow; but they did not show positively that no such channel exists. Probably a careful survey with a large number of lines would have given a more definite answer, but the rough topography interfered with the resistivity‐work, and time and money were not available for a detailed survey. After completion of the geophysical work, the geologist located some outcrops which led him to conclude that no old channel exists at this site. At two other dam‐sites in Oregon resistivity‐measurements showed that there were no burled channels.

Eos, Transactions, American Geophysical Union↗
USGS2009

Vibracore, radiocarbon, microfossil, and grain-size data from Apalachicola Bay, Florida

In 2007, the U.S. Geological Survey collected 24 vibracores within Apalachicola Bay, Florida. The vibracores were collected by using a Rossfelder electric percussive (P-3) vibracore system during a cruise on the Research Vessel (R/V) G.K. Gilbert. Selection of the core sites was based on a geophysical survey that was conducted during 2005 and 2006 in collaboration with the National Oceanic and Atmospheric Administration's (NOAA) Coastal Services Center (CSC) and the Apalachicola Bay National Estuarine Research Reserve. This report contains the vibracore data logs, photographs, and core-derived data including grain-size analyses, radiocarbon ages, microfossil counts, and sedimentological interpretations. The long-term goal of this study is to provide maps, data, and assistance to the Apalachicola Bay National Estuarine Research Reserve in their effort to monitor and understand the geology and ecology of Apalachicola Bay Estuary. These data will inform coastal managers charged with the responsibility for resource preservation.

Florida↗
USGS1947

Preliminary report on the stratigraphy and structure of the Titaluk and upper Ikpikpuk Rivers, Alaska

Geological Survey Party No. 4 was assigned an investigation of the Ikpikpuk and Titaluk Rivers and East Fork of the Ikpikpuk River mainly for the purpose of obtaining stratigraphic information which would be of use in determining the parts of the Upper Cretaceous sequence that underlie the areas investigated by United Geophysical Company parties 43 and 46. A total of five days were spent in geological investigations of the Titaluk River with a Cub plane equipped with pontoons. The party was composed of the geologist and Don Hulshizer, pilot of Wien Alaska Airlines. The geologist and Ronald K. Sorem, field assistant, traversed the Ikpikpuk River by boat from the junction of Maybe Creek and the Kigalik River to near the junction of the East Fork. From the northernmost point reached by boat traverse, the river was examined by plane to north of latitude 70° N., but no outcrops or rubble indicating bedrock were seen. The East Fork was also examined from the air but no outcrops or rubble were observed.

Alaska↗
USGS1990

Oil-shale data, cores, and samples collected by the U.S. geological survey through 1989

The U.S. Geological Survey has acquired a large collection of geotechnical data, drill cores, and crushed samples of oil shale from the Eocene Green River Formation in Colorado, Wyoming, and Utah. The data include about 250,000 shale-oil analyses from about 600 core holes. Most of the data is from Colorado where the thickest and highest-grade oil shales of the Green River Formation are found in the Piceance Creek basin. Other data on file but not yet in the computer database include hundreds of lithologic core descriptions, geophysical well logs, and mineralogical and geochemical analyses. The shale-oil analyses are being prepared for release on floppy disks for use on microcomputers. About 173,000 lineal feet of drill core of oil shale and associated rocks, as well as 100,000 crushed samples of oil shale, are stored at the Core Research Center, U.S. Geological Survey, Lakewood, Colo. These materials are available to the public for research.

Conference Paper↗
USGS2009

High-frequency Rayleigh-wave method

High-frequency (≥2 Hz) Rayleigh-wave data acquired with a multichannel recording system have been utilized to determine shear (S)-wave velocities in near-surface geophysics since the early 1980s. This overview article discusses the main research results of high-frequency surface-wave techniques achieved by research groups at the Kansas Geological Survey and China University of Geosciences in the last 15 years. The multichannel analysis of surface wave (MASW) method is a non-invasive acoustic approach to estimate near-surface S-wave velocity. The differences between MASW results and direct borehole measurements are approximately 15% or less and random. Studies show that simultaneous inversion with higher modes and the fundamental mode can increase model resolution and an investigation depth. The other important seismic property, quality factor ( Q ), can also be estimated with the MASW method by inverting attenuation coefficients of Rayleigh waves. An inverted model (S-wave velocity or Q ) obtained using a damped least-squares method can be assessed by an optimal damping vector in a vicinity of the inverted model determined by an objective function, which is the trace of a weighted sum of model-resolution and model-covariance matrices. Current developments include modeling high-frequency Rayleigh-waves in near-surface media, which builds a foundation for shallow seismic or Rayleigh-wave inversion in the time-offset domain; imaging dispersive energy with high resolution in the frequency-velocity domain and possibly with data in an arbitrary acquisition geometry, which opens a door for 3D surface-wave techniques; and successfully separating surface-wave modes, which provides a valuable tool to perform S-wave velocity profiling with high-horizontal resolution.

Earth Science↗
USGS1983

The role of digital cartographic data in the geosciences

The increasing demand of the Nation's natural resource developers for the manipulation, analysis, and display of large quantities of earth-science data has necessitated the use of computers and the building of geoscience information systems. These systems require, in digital form, the spatial data on map products. The basic cartographic data shown on quadrangle maps provide a foundation for the addition of geological and geophysical data. If geoscience information systems are to realize their full potential, large amounts of digital cartographic base data must be available. A major goal of the U.S. Geological Survey is to create, maintain, manage, and distribute a national cartographic and geographic digital database. This unified database will contain numerous categories (hydrography, hypsography, land use, etc.) that, through the use of standardized data-element definitions and formats, can be used easily and flexibly to prepare cartographic products and perform geoscience analysis. ?? 1983.

Computers & Geosciences↗
USGS1988

Studies of the early Mesozoic basins of the eastern United States

The papers collected in this volume are extended versions selected from material given as oral and poster presentations at a workshop called "Geology of the Early Mesozoic Basins of Eastern North America,' held at the National Center of the US Geological Survey, May 11-14, 1987. The section titles are: 1) studies related to early Mesozoic sedimentary rocks, 2) studies related to Jurassic igneous rocks, 3) studies related to geophysics, structure, and tectonics, 4) studies related to mineral resources, and 5) fieldtrip guides to the Culpeper basin, Virginia. -from Editors

Bulletin↗
USGS1980

Single-channel seismic-reflection profiles and sidescan sonar records collected during May 15-20, 1978, on the southern New England continental shelf

The U.S. Geological Survey completed a cruise aboard the R/V CAPE HENLOPEN during May 15-20, 1978, to map the surface character, thickness and extent of the fine-grained.sediment deposit that covers an area 100 x 200 km on the southern New England Continental Shelf. The study area lies between Great South Channel to the east and Black Channel to the west, and extends from the 50-m isobath to the shelf edge. Single-channel high-resolution seismic-reflection profiles and echo-sounding profiles were collected along 941 km of trackline, sidescan sonar records were collected along 673 km of trackline. The subbottom profiles were collected by using a Huntec*system that was towed at midwater depths. Filters were set at 1 to 7 kHz. Echo-sounding records were collected by using a 60 kHz EDO Western system. A Klein stdescan sonar, set to scan 100 m to either side of the towed fish, was used to collect the sonographs. Navigation during the survey was done by the scientific staff using Loran-C equipment. Fixes were recorded and logged at least every 15 minutes; after the cruise, they were digitized and stored on magnetic tape. The original records can be seen and studied at the U.S. Geological Survey Data Library at Woods Hole, MA 02543. Microfilm copies of the subbottom, echo­sounding, and sidescan sonar records collected during the cruise can be purchased from the National Geophysical and Solar-Terrestrial Data Center, NOAA (National Oceanic ancl Atmosphere Administration), Boulder, CO 80302.

Open-File Report↗
USGS2019

Use of a towed electromagnetic induction (tTem) system for shallow aquifer characterization – An example from the Mississippi Alluvial Plain

The Mississippi Alluvial Plain (MAP) aquifer system is a vital resource that supports agriculture in one of the most productive regions of the country. The U.S. Geological Survey Water Availability and Use Science Program (WAUSP) is conducting a multi-discipline investigation of the MAP aquifer system. The investigation is utilizing borehole, surface, and airborne geophysical methods to improve the characterization and understanding of the aquifer. The combination of geophysical data collected over a range of spatial scales with varying depths of investigation and resolution is key to determining the distribution of sand and clay within the aquifer. Mobile geophysical methods that enable continuous measurements over large areas improve aquifer characterization with their increased spatial coverage. In support of the MAP investigation, a new towed Time-Domain Electromagnetic (tTEM) imaging system developed by Aarhus University was used near Shellmound, Mississippi (MS), to delineate the distribution of coarse- and fine-grained sediments underlying the site. The tTEM results compare favorably with the results of airborne EM (AEM) surveys flown in the study and improve the resolution of sand and gravel distribution within the tTEM depth of investigation.

Mississippi↗
USGS2011

Eocene bituminous coal deposits of the Claiborne group, Webb County, Texas

Two bituminous coal zones, the San Pedro and the Santo Tomas, in the middle Eocene Claiborne Group of Webb County, south Texas (Figure 1), are among the coal resources that are not evaluated quantitatively as part of the current Gulf Coastal Plain coal resource assessment. Coal beds within these zones were mined by underground methods northwest of Laredo until 1939 and have been intermittently mined at the surface since 1979. These coals have long been regarded as unique within the Gulf Coast Tertiary coal-bearing section because they are high-volatile C bituminous in rank and because their physical characteristics resemble upper Carboniferous cannel coals of the Appalachians and Europe. Discontinuous exposures of the Santo Tomas and the underlying San Pedro coal zone extend northwestward from Dolores for approximately 15 to 21 mi along the breaks of the Rio Grande and its tributaries in Webb County (Figure 1). This part of south Texas lies along the southwestern flank of the Rio Grande Embayment, which extends south and southeastwardly through the Mexican States of Coahuila, Nuevo León, and Tamaulipas (Figure 1). Within the embayment, the lower to middle part of the Claiborne Group consists of marine mudstones (Reklaw Formation) in the east and northeast and sandstones and mudstones (Bigford Formation) in the south and southwest (Figure 2). The marine mudstones coarsen upward into fluvial-deltaic sandstones (Queen City Sand) that prograded gulfward across eastern and central Texas (Guevara and Garcia, 1972). To the west and southwest, the interval overlying the Bigford Formation becomes less sandy, and claystones (El Pico Clay) predominate. Although the San Pedro coal zone has been placed traditionally near the top of the Bigford Formation and the Santo Tomas coal zone near the base of the El Pico Clay, recent work has failed to validate a mappable contact between these formations (Warwick and Hook, 1995). The coal beds dip northeast at less than 2 degrees towards the synclinal axis of the basin. The following summary is based upon published and unpublished reports; drillhole records (geophysical logs, descriptions of cores and cuttings); coal-quality data obtained from the permit files of the Railroad Commission of Texas and recent sampling by the U.S. Geological Survey (USGS); a preliminary review of proprietary data acquired recently by the USGS; and field work conducted by the USGS since 1994. A total of approximately 200 drillhole records was examined.

Texas↗
USGS2011

Recovery and reprocessing of legacy geophysical data from the archives of the State Company of Geology and Mining (GEOSURV) of Iraq and Iraq Petroleum Company (IPC)

Aeromagnetic data belonging to the State Company of Geology and Mining of Iraq (GEOSURV) have been recovered from magnetic tapes and early paper maps. In 1974 a national airborne survey was flown by the French firm Compagnie General de Geophysique (CGG). Following the survey the magnetic data were stored on magnetic tapes within an air conditioned archive run by GEOSURV. In 1990, the power supply to the archive was cut resulting in the present‐day poor condition of the tapes. Frontier Processing Company and the U.S. Geological Survey (USGS) have been able to recover over 99 percent of the original digital data from the CGG tapes. Preliminary reprocessing of the data yielded a total magnetic field anomaly map that reveals fine structures not evident in available published maps. Successful restoration of these comprehensive, high quality digital datasets obviates the need to resurvey the entire country, thereby saving considerable time and money. These data were delivered to GEOSURV in a standard format for further analysis and interpretation. A parallel effort by GETECH concentrated on recovering the legacy gravity data from the original field data sheets archived by IPC (Iraq Petroleum Company). These data have been compiled with more recent GEOSURV sponsored surveys thus allowing for the first time a comprehensive digital and unified national gravity database to be constructed with full principal facts. Figure 1 shows the final aeromagnetic and gravity data coverage of Iraq. The only part of Iraq lacking gravity and aeromagnetic data coverage is the mountainous areas of the Kurdish region of northeastern Iraq. Joint interpretation of the magnetic and gravity data will help guide future geophysical investigations by GEOSURV, whose ultimate aim is to discover economical mineral and energy resources.

SEG Technical Program Expanded Abstracts↗