SEARCH · USGS Science

Results for “The Depositional Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54Linked to original sources

USGS2020

Geomorphic map of western Whatcom County, Washington

Western Whatcom County has a rich history of glaciation, sea-level change, fluvial erosion and deposition, landsliding, nearby volcanic activity, and human landscape modification. This lidar-derived geomorphic map interprets this history from the form and position of the Earth’s surface. The geomorphic record is broken into nine phases, beginning with the peak of the Vashon stade of the Fraser glaciation of Armstrong and others (1965) (phase 1), shortly after 16,000 years ago. The Cordilleran ice sheet was ≥1.6 km thick in the Bellingham area. Glacial lineations on high ground demonstrate that ice flow was from north to south. Storage of water in ice sheets at this time resulted in global sea level ~120 m lower than at present. The weight of the ice sheet depressed the land so that local relative sea level was at least 150 m higher than at present. As the ice sheet melted and thinned, it floated, broke up, and was replaced by salt water. The margin of the ice sheet—or at least its grounding line—retreated to the northeast of the map area during or before phase 2. Marine deposition, currents, and waves smoothed earlier-formed surfaces in the western part of the map area. Global sea level rose (because of melting of continental ice sheets), but the Fraser Lowland rose even faster (due to glacio-isostatic rebound following the loss of ice-sheet load), and thus local relative sea level fell. The Cordilleran ice sheet readvanced during the Sumas stade of Armstrong and others (1965). Oldest Sumas moraines formed when relative sea level at Bellingham was ~55 m (phase 3). Younger moraines formed when relative sea level at Bellingham was ~25 m (phase 4). The amount of Sumas ice retreat and readvance between these times is unknown. Younger Sumas events are marked by local moraines, progressive isostatic rebound and lowering of relative sea level, and changes in the flow of ice-marginal water. During phase 5, the southeast margin of the ice sheet advanced, perhaps because capture of ice-marginal drainage by the Samish River (east and south of the map area) meant the ice sheet was no longer trimmed by high-discharge flow along Squalicum channel. Farther west and north, the ice margin retreated between phases 4 and 5. Phases 6 through 9 may mark stillstands during further ice retreat. There were glacial outburst floods (jökulhlaups) during phases 7 and 8, and perhaps during phase 5. When Sumas ice left the area, perhaps about 11,500 years ago, the Nooksack River appears to have discharged northeast through Sumas Valley to the Fraser River. Details of the switch to its modern course are speculative, but archaeological and sediment-supply arguments suggest that the modern Nooksack River delta south of Ferndale formed within the past 5,000 years. The foothills of the North Cascades are decorated with abundant post-glacial deep-seated landslides. Anomalously high late Holocene beaches are found at Birch Bay, Neptune Beach, perhaps at Maple Beach on the east side of Point Roberts, and perhaps at the northwest corner of the Lummi Peninsula. These beaches may have been uplifted by earthquakes that did not rupture the surface. The low-relief landscape shaped by the Cordilleran ice sheet, along with fluvial infilling of low areas, resulted in abundant wetland, at least 70 percent of which has been diked and (or) drained to control flooding and facilitate farming.

Washington↗

USGS1974

Sandstone distribution patterns in the Pocahontas Formation of southwest Virginia and southern West Virginia

The Pocahontas Formation is a clastic wedge of sandstone, siltstone, shale, coal, and underclay that is transitional between underlying marine strata of Mississippian age and overlying continental beds of Pennsylvanian age. It attains a maximum thickness of 750 ft. at the southeastern edge of the Appalachian coal field and thins northwestward by the tonguing out of lower beds and by the truncation of upper beds at an overlying unconformity. Sandstone, which composes about 70 percent of the formation, occurs in lenticular bodies that have two distinct distribution patterns—lobate and linear—of contrasting orientation and composition. The lobate bodies are elongate to the northwest and contain sandstone having a quartz content of about 50 to 65 percent. Within a lobe, thickness lines show a northwestward bifurcating pattern similar to the pattern of channels in an alluvial distributary system of a modern delta. Laterally, lobate bodies merge to form northwestward-thinning sandstone wedges as much as 300 ft. thick. The linear pattern is shown by 3- to 8-mi.-wide sandstone lenses that extend north-northeast for about 45 mi. They are near the distal ends of the lobate sandstone and consist of 0 to 140 ft. of relatively pure quartzose sandstone. The well-washed character and orientation of the linear bodies, normal to the lobate bodies, indicate a barrier-bar origin. These sediment distribution patterns show that the Pocahontas Formation was deposited mainly in deltaic complexes built out from the southeast during marine regression to the northwest. Brief periods of transgression and stable shoreline conditions are recorded by tongues of marine strata and by the barrier bars.

Virginia, West Virginia↗

USGS2012

Deep-Sea Turbidites as Guides to Holocene Earthquake History at the Cascadia Subduction Zone—Alternative Views for a Seismic-Hazard Workshop

This report reviews the geological basis for some recent estimates of earthquake hazards in the Cascadia region between southern British Columbia and northern California. The largest earthquakes to which the region is prone are in the range of magnitude 8-9. The source of these great earthquakes is the fault down which the oceanic Juan de Fuca Plate is being subducted or thrust beneath the North American Plate. Geologic evidence for their occurrence includes sedimentary deposits that have been observed in cores from deep-sea channels and fans. Earthquakes can initiate subaqueous slumps or slides that generate turbidity currents and which produce the sedimentary deposits known as turbidites. The hazard estimates reviewed in this report are derived mainly from deep-sea turbidites that have been interpreted as proxy records of great Cascadia earthquakes. The estimates were first published in 2008. Most of the evidence for them is contained in a monograph now in press. We have reviewed a small part of this evidence, chiefly from Cascadia Channel and its tributaries, all of which head offshore the Pacific coast of Washington State. According to the recent estimates, the Cascadia plate boundary ruptured along its full length in 19 or 20 earthquakes of magnitude 9 in the past 10,000 years; its northern third broke during these giant earthquakes only, and southern segments produced at least 20 additional, lesser earthquakes of Holocene age. The turbidite case for full-length ruptures depends on stratigraphic evidence for simultaneous shaking at the heads of multiple submarine canyons. The simultaneity has been inferred primarily from turbidite counts above a stratigraphic datum, sandy beds likened to strong-motion records, and radiocarbon ages adjusted for turbidity-current erosion. In alternatives proposed here, this turbidite evidence for simultaneous shaking is less sensitive to earthquake size and frequency than previously thought. Turbidites far below a channel confluence, instead of representing the merged flows from two tributaries, monitor the dominant tributary only. Sandy beds low in the turbidites, instead of matching from channel to channel, permit divergent stratigraphic correlations; and rather than approximating strong-motion seismograms, the sandy beds more likely record processes internal to the generation and transformation of subaqueous mass movements. The age adjustments, instead of supporting other evidence that all the northern ruptures were long, are uncertain enough to accord with variation in rupture mode, and this variation improves agreement with onshore paleoseismology. Many of the turbidites counted as evidence for frequent earthquakes on the southern Cascadia plate boundary may instead reflect nearness to steep slopes. This report is meant to aid in the updating of national maps of seismic hazards in Canada and the United States. It offers three main conclusions for consideration at a U.S. hazard-map workshop slated for March 21-22, 2012: If giant earthquakes are the norm for the plate boundary offshore southern Washington, the strongest paleoseismic evidence for this rupture mode is the average earthquake-recurrence interval of about 500 years that is evidenced both offshore in lower Cascadia Channel and onshore at estuaries of southern Washington and northernmost Oregon. The plate boundary offshore southern British Columbia and northern Washington may be capable of producing great earthquakes at an average interval as short as 300 years that is evidenced mainly onshore. Review of more of the turbidite evidence now in press may clarify implications for the hazard maps. Further work on the deep-sea turbidites could target sedimentary processes and chronological uncertainties that may affect the turbidites' sensitivity to fault-rupture lengths and recurrence rates.

Washington;Oregon;California↗

USGS2016

Refined depositional history and dating of the Tongaporutuan reference section, north Taranaki, New Zealand: new volcanic ash U-Pb zircon ages, biostratigraphy and sedimentation rates

This study presents new radiometric ages from volcanic ash beds within a c. 1900 m thick, progradational, deep-water clastic slope succession of late Miocene age exposed along the north Taranaki coast of the North Island, New Zealand. The ash beds yield U–Pb zircon ages ranging from 10.63 ± 0.65 Ma to 8.97 ± 0.22 Ma. The new ages are compatible with and provide corroboration of New Zealand Tongaporutuan Stage planktic foraminiferal and bolboformid biostratigraphic events identified in the same section. The close accord between these two age datasets provides a stratigraphically consistent and coherent basis for examining margin evolution. The arrival of a prograding clastic wedge and ensuing upward shoaling is recorded by sedimentation rates c. 2000 m/Ma–1 that are an order of magnitude higher than sedimentation rates on the precursor deep basin floor. This outcrop study provides new constraints for interpreting analogous subsurface deposits in Taranaki Basin and complements the regional late Miocene biostratigraphic dating framework.

Taranaki↗

USGS1994

A synthesis of post-glacial diatom records from Lake Baikal

The biostratigraphy of fossil diatoms contributes important chronologic, paleolimnologic, and paleoclimatic information from Lake Baikal in southeastern Siberia. Diatoms are the dominant and best preserved microfossils in the sediments, and distinctive assemblages and species provide inter-core correlations throughout the basin at millennial to centennial scales, in both high and low sedimentation-rate environments. Distributions of unique species, once dated by radiocarbon, allow diatoms to be used as dating tools for the Holocene history of the lake. Diatom, pollen, and organic geochemical records from site 305, at the foot of the Selenga Delta, provide a history of paleolimnologic and paleoclimatic changes from the late glacial (15 ka) through the Holocene. Before 14 ka diatoms were very rare, probably because excessive turbidity from glacial meltwater entering the lake impeded productivity. Between 14 and 12 ka, lake productivity increased, perhaps as strong winds promoted deep mixing and nutrient regeneration. Pollen evidence suggests a cold shrub — steppe landscape dominated the central Baikal depression at this time. As summer insolation increased, conifers replaced steppe taxa, but diatom productivity declined between 11 and 9 ka perhaps as a result of increased summer turbidity resulting from violent storm runoff entering the lake via short, steep drainages. After 8 ka, drier, but more continental climates prevailed, and the modern diatom flora of Lake Baikal came to prominence. On Academician Ridge, a site of slow sedimentation rates, Holocene diatom assemblages at the top of 10-m cores reappear at deeper levels suggesting that such cores record at least two previous interglacial (or interstadial?) periods. Nevertheless, distinctive species that developed prior to the last glacial period indicate that the dynamics of nutrient cycling in Baikal and the responsible regional climatic environments were not entirely analogous to Holocene conditions. During glacial periods, the deep basin sediments of Lake Baikal are dominated by rapidly deposited clastics entering from large rivers with possibly glaciated headwaters. On the sublacustrine Academician Ridge (depth = 300 m), however, detailed analysis of the diatom biostratigraphy indicates that diastems (hiatuses of minor duration) and (or) highly variable rates of accumulation complicate paleolimnologic and paleoclimatic reconstructions from these records.

Lake Baikal↗

USGS2017

Radiocarbon dates and late-Quaternary stratigraphy from Mamontova Gora, unglaciated central Yakutia, Siberia, U.S.S.R.

A fine exposure of perennially frozen ice-rich silt and associated flora and vertebrate fauna of late-Quaternary age exists at Mamontova Gora along the Aldan River in central Yakutia, Siberia, U.S.S.R. The silt deposit caps a 50-m-high terrace and consists of three units. An upper layer 1–2 m thick overlies a 10–15-m-thick brownish to black silt layer. The lower silt layer is greenish to gray and about 15 m thick. All the silt is well sorted with 60% of the particles falling between 0.005 and 0.5 mm in diameter and is generally chemically and mineralogically homogeneous. The middle unit contains may extinct vertebrate mammal remains and ice wedges. The lower unit contains little vegetation and no ice wedges. The silt is widespread and exists as a loamy blanket on terraces at various elevations on both sides of the lower Aldan River. The origin of the silt blanket of late-Quaternary age in central Yakutia has long been controversial. Various hypotheses have been suggested, including lacustrine and alluvial, as well as frost-action origins. It is sometimes referred to as loess-like loam. Péwé believes the silt at Mamontova Gora is loess, some of which has been retransported very short distances by water. The silt probably was blown from wide, braided, unvegetated flood plains of rivers draining nearby glaciers. The silt deposits are late Quaternary in age and probably associated with the Maximum glaciation (Samarov) and Sartan and Syryan glaciations of Wisconsinan age. On the basis of biostratigraphy, 10 radiocarbon dates, and their relation to the nearby glacial record, it is felt that the upper unit at Mamontova Gora is Holocene and the middle unit is Wisconsinan. The youngest date available from the middle unit at this particular location is 26,000 years. Dates greater than 56,000 years were obtained in the lower part of the middle unit. The lower unit is definitely beyond the range of radiocarbon dating and probably is older than the last interglacial. The sediment, fauna, ice wedges, stratigraphy, and age of perennially frozen slit deposits in central Alaska are remarkably similar to those of the deposits exposed in central Yakutia. Both areas consist of unglaciated rolling lowlands and river terraces surrounded by high mountains that were extensively glaciated in Pleistocene time. The glaciers extended from the high mountains to the edges of the ranges. In both regions, extensively braided, silt-charged rivers drained the mountains and flowed through the lowlands on their way to the sea. It follows that there should be a similar late-Quaternary history.

Siberia↗

USGS2008

The evolution of volcano-hosted geothermal systems based on deep wells from Karaha-Telaga Bodas, Indonesia

Temperature and pressure surveys, fluid samples, and petrologic analyses of rock samples from deep drill holes at the Karaha - Telaga Bodas geothermal field on the volcanic ridge extending northward from Galunggung Volcano, West Java, have provided a unique opportunity to characterize the evolution of an active volcano-hosted geothermal system. Wells up to 3 km in depth have encountered temperatures as high as 353??C and a weakly altered granodiorite that intruded to within 2 to 3 km of the surface. The intrusion is shallowest beneath the southern end of the field where an acid lake overlies a nearly vertical low resistivity structure (<10 ohm-m) defined by magnetotelluric measurements. This structure is interpreted to represent a vapor-dominated chimney that provides a pathway to the surface for magmatic gases. Four distinct hydrothermal mineral assemblages document the evolution of the geothermal system and the transition from liquid- to vapor-dominated conditions. The earliest assemblage represents the initial liquid-dominated system generated during emplacement of the granodiorite between 5910 ?? 76 and 4200 ?? 150 y BP. Tourmaline, biotite, actinolite, epidote and clay minerals were deposited contemporaneously at progressively greater distances from the intrusive contact (assemblage 1). At 4200 ?? 150 y BP, flank collapse and the formation of the volcano's crater, Kawah Galunggung, resulted in catastrophic decompression and boiling of the hydrothermal fluids. This event initiated development of the modern vapor-dominated regime. Chalcedony and then quartz were deposited as the early low salinity liquids boiled (assemblage 2). Both vapor- and liquid-rich fluid inclusions were trapped in the quartz crystals. Liquid-rich fluid inclusions from the southern part of the field record salinities ranging from 0 to 26 weight percent NaCl- CaCl2 equivalent and locally contain fluorite daughter crystals. We suggest, based on temperature-salinity relationships and evidence of boiling, that these fluids were progressively concentrated as steam was lost from the system. However, mixing with fluids derived from the underlying intrusion or generated during the formation of acid SO4 water on the vapor-dominated chimney margins could have contributed to the observed salinities. As pressures declined, CO2- and SO4-rich steam-heated water drained downward, depositing anhydrite and calcite (assemblage 3) in the fractures, limiting further recharge. Fluid inclusions with salinities up to 31 weight percent NaCl equivalent were trapped in these minerals as the descending water vaporized. The final assemblage is represented by precipitates of NaCl, KCl and FeClx deposited on rock surfaces in portions of the vapor-dominated zone that boiled dry. Vapor-dominated conditions extend over a distance of at least 10 km and to depths below sea level. Deep wells drilled into the underlying liquid-dominated reservoir in the northern and central part of the volcanic ridge produce low salinity fluids representing recent recharge of meteoric and steam-heated water. The evolution of volcanic-hosted vapor-dominated geothermal systems can be described by a five stage model. Stage 1 involves the formation of an over-pressured liquid-dominated geothermal system soon after magmatic intrusion. In Stages 2 and 3, pressures progressively decrease, and a curtain of steam-heated water surrounding a magmatic vapor-dominated chimney at 350??C and 14 ?? 2 MPa develops. The relatively low pressure near the base of the chimney causes liquid inflow adjacent to the intrusion and the development of a secondary marginal vapor-dominated zone. In Stage 4, the magmatic vapor discharge from the intrusion becomes small, vapor pressure declines, and the secondary vapor-dominated zone expands above the intrusion. In Stage 5, the vapor-dominated zone floods because heat from the intrusion is insufficient to boil all liquid inflow. A more common, liquid-dominated volcanic-hosted system the

American Journal of Science↗

USGS2016

Records of continental slope sediment flow morphodynamic responses to gradient and active faulting from integrated AUV and ROV data, offshore Palos Verdes, southern California Borderland

Variations in seabed gradient are widely acknowledged to influence deep-water deposition, but are often difficult to measure in sufficient detail from both modern and ancient examples. On the continental slope offshore Los Angeles, California, autonomous underwater vehicle, remotely operated vehicle, and shipboard methods were used to collect a dense grid of high-resolution multibeam bathymetry, chirp sub-bottom profiles, and targeted sediment core samples that demonstrate the influence of seafloor gradient on sediment accumulation, depositional environment, grain size of deposits, and seafloor morphology. In this setting, restraining and releasing bends along the active right-lateral Palos Verdes Fault create and maintain variations in seafloor gradient. Holocene down-slope flows appear to have been generated by slope failure, primarily on the uppermost slope (~ 100–200 m water depth). Turbidity currents created a low relief (< 10 m) channel, up-slope migrating sediment waves (λ = ~ 100 m, h ≤ 2 m), and a series of depocenters that have accumulated up to 4 m of Holocene sediment. Sediment waves increase in wavelength and decrease in wave height with decreasing gradient. Integrated analysis of high-resolution datasets provides quantification of morphodynamic sensitivity to seafloor gradients acting throughout deep-water depositional systems. These results help to bridge gaps in scale between existing deep-sea and experimental datasets and may provide constraints for future numerical modeling studies.

Marine Geology↗

USGS2016

Ferromanganese crusts and nodules, rocks that grow

Ferromanganese (Fe-Mn) crusts and nodules are marine sed- imentary mineral deposits, composed mostly of iron and manganese oxides. They precipitate very slowly from seawa- ter, or for nodules also from deep-sea sediment pore waters, recording the chemical signature of these source waters as they grow. Additional elements incorporate via sorption pro- cesses onto the Fe-Mn oxides, including rare and valuable metals that can reach concentrations that are economically valuable.

Book chapter↗

USGS2020

Thicknesses of lava flows in satellite images: Comparison of layered mare units with terrestrial analogs

Recent advances in satellite imaging technology have greatly improved our observations of planetary surfaces. The Lunar Reconnaissance Orbiter (LRO) Narrow Angle Camera (NAC) records images with resolutions on average of 0.5 m per pixel, resolving meter scale features on the surface of the Moon. NAC images have revealed layered deposits, interpreted to be sequences of mare basalt flows, in the walls of impact craters on the lunar nearside. However, caution must be exercised in the interpretation of surface processes from morphologies of features that are close to the limits of detectability. Our goal is to quantify where that limit is for lava flow stratigraphy. Here we report on a terrestrial analog study conduced to better constrain limitations in the measurements of thicknesses of lava flows observed in high-resolution satellite-collected images. Using WorldView-2 satellite images, we mapped layered basalt flows at three sites in the Wai'anae and Ko'olau Ranges of O'ahu, Hawai'i. Fieldwork conducted at these sites allowed for assessment of the accuracy of image interpretations. We found that flow thickness estimates made using WorldView-2 images overestimated thicknesses of individual lava flows measured in the field at all eight locations visited by a factor of 1.2 to 3.5. A primary reason for this overestimation by remote sensing analysis is that many outcropping “layers” within a transect contain more than one individual flow, a distinction that is not visible in satellite images. However, the mean thickness of the layers seen in the orbital data was 0.8 to 1.7 times the outcrop thickness measured in the field, suggesting that the remote measurements should be considered estimates of the outcrop thickness rather than the thickness of individual lava flows. Measurements of layered lunar mare lava units in LRO NAC images provided layer thicknesses that ranged from <1–6 times greater than those derived from images of the O'ahu study sites. It is reasonable to expect that many lunar outcrops similarly contain more than one individual flow and display similar outcropping patterns. This suggests that many current estimates of layer thicknesses derived by comparable methods actually correspond to outcrop thicknesses. Current interpretations of lava flow thicknesses derived from planetary images should be considered maximums for individual flow thicknesses with uncertainties that may be as high as a factor of 3 or more.

Hawaii↗

USGS2026

Sedimentological reconstruction of hurricane storm surges from a carbonate reef coastline at Anegada, British Virgin Islands

Anegada is a small, low-lying carbonate island in the British Virgin Islands that is highly vulnerable to marine inundation from frequent hurricanes. A major challenge in forecasting the timing, intensity, and impacts of future hurricanes to islands such as Anegada is the limited short-term instrumental record that does not capture the full spectrum of inundation events from the frequent but low-magnitude to rare, but high-magnitude events. Washover deposits, which are transported onshore by hurricane-related storm surges and preserved within the onshore stratigraphy, can provide insight into the recurrence of these events. Here, we use grain size distributions, X-ray fluorescence (XRF) data, and an inverse sediment transport model to characterize a series of anomalous sand deposits from shallow hypersaline ponds to determine the variability in storm surges impacting Anegada over at least the last 70 years. The analyses were successfully applied to modern analogues of storms impacting Anegada's southern shoreline (Hurricanes Donna in 1960 at Category 3; Earl in 2010 at Category 4; and Irma in 2017 at Category 5). These deposits are identified by coarse-grained material and elevated marine geochemical signals (Ca, Sr, ln(Br/Ti)). Inverse modelled flow parameters (average flow depth = 0.89–1.46 m relative to the reef flat, average flow speed = 2.95–3.78 m/s) agree with observational data and eyewitness accounts, and the deposit associated with Hurricane Donna indicates the greatest impacts occurred along the southern shoreline (modelled flow depth = 1.24–1.46 m relative to the reef flat, flow speed = 3.49–3.78 m/s). Using the modern analogues as a basis for comparison, we infer the origin of an older sand deposit to be from Hurricane Dog in 1950, when it tracked by Anegada as a Category 3 storm. This methodology provides a transferable framework for interpreting storm recurrence in carbonate-dominated coastlines worldwide that could be used to inform hurricane hazard assessments and risk management efforts.

Anegada↗

USGS2006

Migration of the Pee Dee River system inferred from ancestral paleochannels underlying the South Carolina Grand Strand and Long Bay inner shelf

Several generations of the ancestral Pee Dee River system have been mapped beneath the South Carolina Grand Strand coastline and adjacent Long Bay inner shelf. Deep boreholes onshore and high-resolution seismic-reflection data offshore allow for reconstruction of these paleochannels, which formed during glacial lowstands, when the Pee Dee River system incised subaerially exposed coastal-plain and continental-shelf strata. Paleochannel groups, representing different generations of the system, decrease in age to the southwest, where the modern Pee Dee River merges with several coastal-plain tributaries at Winyah Bay, the southern terminus of Long Bay. Positions of the successive generational groups record a regional, southwestward migration of the river system that may have initiated during the late Pliocene. The migration was primarily driven by barrier-island deposition, resulting from the interaction of fluvial and shoreline processes during eustatic highstands. Structurally driven, subsurface paleotopography associated with the Mid-Carolina Platform High has also indirectly assisted in forcing this migration. These results provide a better understanding of the evolution of the region and help explain the lack of mobile sediment on the Long Bay inner shelf. Migration of the river system caused a profound change in sediment supply during the late Pleistocene. The abundant fluvial source that once fed sand-rich barrier islands was cut off and replaced with a limited source, supplied by erosion and reworking of former coastal deposits exposed at the shore and on the inner shelf.

South Carolina↗

USGS2007

Surficial sediment character of the New York-New Jersey offshore continental shelf region: A GIS compilation

Broad continental shelf regions such as the New York Bight are the product of a complex geologic history and dynamic oceanographic processes, dominated by the Holocene marine transgression (>100 m sea-level rise) following the end of the last Pleistocene ice advance ~ 20,000 years ago. The area of the U.S. Exclusive Economic Zone (U.S. EEZ) territory, extending 200 nautical miles seaward from the coast, is larger than the continental U.S. and contains submerged landforms that provide a variety of natural functions and societal benefits, such as: critical habitats for fisheries, ship navigation and homeland security, and engineering activities (i.e. oil and gas platforms, pipeline and cable routes, potential wind-energy-generation sites). Some parts of the continental margins, particularly inner-continental shelf regions, also contain unconsolidated hard-mineral deposits such as sand and gravel that are regarded as potential aggregate resources to meet or augment needs not met by onshore deposits (Williams, 1992). The present distribution of surficial sediment off the northeastern United States is shaped from the deposits left by the last glaciation and reflects the cumulative effects of sediment erosion, transport, sorting, and deposition by storm and tidal processes during the Holocene rise in sea level. As a result, the sediments on the sea floor represent both an historical record of former conditions and a guide to possible future sedimentary environments. The U.S. Geological Survey (USGS) through the Coastal and Marine Geology Program, in cooperation with the University of Colorado and other partners, has compiled extant sediment character and textural data as well as other geologic information on the sea floor from all regions around the U.S. into the usSEABED data system (Reid and others, 2005; Buczkowski and others, 2006; Reid and others, 2006). The usSEABED system, which contains information on sediment grain size and lithology for more than 340,500 stations within the U.S. EEZ. has been developed and populated with data as part of the USGS Marine Aggregate Resources and Processes and the National Benthic Habitats projects in order to provide the base-line data needed to update the current maps of offshore surficial geologic character and sediment distribution. The maps are also used to characterize benthic sea floor environments important for marine ecosystems. U.S. Geological Survey, Data Series 118 (Reid and others, 2005), of the usSEABED data release series, represents the combined efforts of the USGS and several other government agencies to provide a unified resource for accessing and preserving records of U.S. east coast sea floor geologic information and sediment texture data. For this present report, we have chosen to focus on the New York-New Jersey region, an area that has been intensely studied by the USGS for many years to address many complex issues. This report illustrates the uses of the usSEABED database for GIS applications, while offering additional insight into the resources and data available from the USGS and its collaborative institutions. This report is based on data contained in U.S. Geological Survey Data Series 118 (Reid and others, 2005) and shows an assortment of example GIS products that are possible using usSEABED. All data are intended to be GIS-ready and should not require any additional cleanup, formatting, or renaming of fields in order to use the data in a Geographic Information System. This project employs the Environmental Systems Research Institute's (ESRI) ArcView™ software. Many of these maps were made as part of the ongoing USGS study to assess marine aggregate resources offshore New York and New Jersey, but these maps can serve many other purposes. The marine science community, educators, students and others are encouraged to use these data to generate GIS products for their own purposes. The objectives of the Marine Aggregate Resources and Processes project are to produce a series of new geologic maps and reports of the sea floor that will provide scientific insights into the character and geologic development of U.S. continental margins and to use these maps and information to assess the potential availability of offshore sand and gravel resources. The mapping and aggregate resource assessments are being conducted on a national scale using the usSEABED data base as described in Williams and others (2003). Potential uses for these data include: (1) defining the geological variability of the sea floor in relation to benthic habitat diversity; (2) improving our understanding of the processes that control the distribution and transport of bottom sediments and benthic habitats; (3) locating aggregate resources for beach nourishment and industrial applications; and (4) providing a detailed geospatial framework for future marine science research, monitoring, and management activities. The initial assessments are in progress for the New York Bight and Louisiana offshore areas.

New Jersey, New York↗

USGS2004

Hydrogeology and simulation of regional ground-water-level declines in Monroe County, Michigan

Observed ground-water-level declines from 1991 to 2003 in northern Monroe County, Michigan, are consistent with increased ground-water demands in the region. In 1991, the estimated ground-water use in the county was 20 million gallons per day, and 80 percent of this total was from quarry dewatering. In 2001, the estimated ground-water use in the county was 30 million gallons per day, and 75 percent of this total was from quarry dewatering. Prior to approximately 1990, the ground-water demands were met by capturing natural discharge from the area and by inducing leakage through glacial deposits that cover the bedrock aquifer. Increased ground-water demand after 1990 led to declines in ground-water level as the system moves toward a new steady-state. Much of the available natural discharge from the bedrock aquifer had been captured by the 1991 conditions, and the response to additional withdrawals resulted in the observed widespread decline in water levels. The causes of the observed declines were explored through the use of a regional ground-water-flow model. The model area includes portions of Lenawee, Monroe, Washtenaw, and Wayne Counties in Michigan, and portions of Fulton, Henry, and Lucas Counties in Ohio. Factors, including lowered water-table elevations because of below average precipitation during the time period (1991 - 2001) and reduction in water supply to the bedrock aquifer because of land-use changes, were found to affect the regional system, but these factors did not explain the regional decline. Potential ground-water capture for the bedrock aquifer in Monroe County is limited by the low hydraulic conductivity of the overlying glacial deposits and shales and the presence of dense saline water within the bedrock as it dips into the Michigan Basin to the west and north of the county. Hydrogeologic features of the bedrock and the overlying glacial deposits were included in the model design. An important step of characterizing the bedrock aquifer was the determination of inputs and outputs of water—leakage from glacial deposits and flows across model boundaries. The imposed demands on the groundwater system create additional discharge from the bedrock aquifer, and this discharge is documented by records and estimates of water use including: residential and industrial use, irrigation, and quarry dewatering. Hydrologic characterization of Monroe County and surrounding areas was used to determine the model boundaries and inputs within the ground-water model. MODFLOW-2000 was the computer model used to simulate ground-water flow. Predevelopment, 1991, and 2001 conditions were simulated with the model. The predevelopment model did not include modern water use and was compared to information from early settlement of the county. The 1991 steady-state model included modern demands on the ground-water system and was based on a significant amount of data collected for this and previous studies. The predevelopment and 1991 simulations were used to calibrate the numerical model. The simulation of 2001 conditions was based on recent data and explored the potential ground-water levels if the current conditions persist. Model results indicate that the ground-water level will stabilize in the county near current levels if the demands imposed during 2001 are held constant.

Michigan↗

USGS2013

Combined impacts of current and future dust deposition and regional warming on Colorado River Basin snow dynamics and hydrology

The Colorado River provides water to 40 million people in seven western states and two countries and to 5.5 million irrigated acres. The river has long been overallocated. Climate models project runoff losses of 5–20% from the basin by mid-21st century due to human-induced climate change. Recent work has shown that decreased snow albedo from anthropogenic dust loading to the CO mountains shortens the duration of snow cover by several weeks relative to conditions prior to western expansion of the US in the mid-1800s, and advances peak runoff at Lees Ferry, Arizona, by an average of 3 weeks. Increases in evapotranspiration from earlier exposure of soils and germination of plants have been estimated to decrease annual runoff by more than 1.0 billion cubic meters, or ~5% of the annual average. This prior work was based on observed dust loadings during 2005–2008; however, 2009 and 2010 saw unprecedented levels of dust loading on snowpacks in the Upper Colorado River Basin (UCRB), being on the order of 5 times the 2005–2008 loading. Building on our prior work, we developed a new snow albedo decay parameterization based on observations in 2009/10 to mimic the radiative forcing of extreme dust deposition. We convolve low, moderate, and extreme dust/snow albedos with both historic climate forcing and two future climate scenarios via a delta method perturbation of historic records. Compared to moderate dust, extreme dust absorbs 2× to 4× the solar radiation, and shifts peak snowmelt an additional 3 weeks earlier to a total of 6 weeks earlier than pre-disturbance. The extreme dust scenario reduces annual flow volume an additional 1% (6% compared to pre-disturbance), a smaller difference than from low to moderate dust scenarios due to melt season shifting into a season of lower evaporative demand. The sensitivity of flow timing to dust radiative forcing of snow albedo is maintained under future climate scenarios, but the sensitivity of flow volume reductions decreases with increased climate forcing. These results have implications for water management and suggest that dust abatement efforts could be an important component of any climate adaptation strategies in the UCRB.

Arizona, Colorado, New Mexico, Utah, Wyoming↗

USGS1989

Geologic map of the Latir Volcanic Field and adjacent areas, northern New Mexico

This map was first published as a printed edition in 1989. The geologic data have now been captured digitally and are presented here along with images of the printed map sheet and component parts as PDF files. This map encompasses all or parts of ten 7.5 minute quadrangles in the Taos Range of the Sangre de Cristo Mountains in northern New Mexico. Geologic mapping was initiated in this area by the U.S. Geological Survey in response to its mandate under the Wilderness Act of 1964 to evaluate the mineral resource potential of the Latir and Wheeler Peak Wildernesses and the Columbine-Hondo Wilderness Study Area in the Carson National Forest. The mapping was later extended to adjacent areas in order to better understand the regional geology and geologic history of the range. The present map focuses on the early Tertiary (largely Oligocene) Latir Volcanic Field and plutonic rocks associated with it. The basement rocks in the map area are Paleoproterozic amphibolite-facies metasedimentary and metavolcanic rocks intruded by large bodies of quartz monzonite, granodiorite and gabbro dated at between 1,750 and 1,690 Ma. The basement rocks are locally overlain by Mississippian limestone or by Pennsylvanian and Permian redbeds. The basement rocks were thrust eastward across a thick section of similar late Paleozoic rocks along low-angle faults during the Laramide Orogeny. Post-Laramide erosion largely removed the sedimentary cover from the basement rocks and reduced the topography to a low-relief surface locally overlain by scattered lenses of Eocene to Oligocene shale, sandstone, and conglomerate. It was on this surface that the earliest rocks of the Latir Volcanic Field were deposited, beginning in the Oligocene, about 30 Ma. The early volcanic rocks comprise a thick sequence of andesite, dacite, and minor rhyolite, deposited as flows, breccia, and volcaniclastic sediments from numerous local volcanic centers; thin layers of rhyolite tuff are from distant eruptions, some probably in the San Juan Mountains. These volcanic rocks probably record early growth of an upper-crustal batholith. At 25 Ma enormous eruptions of peralkaline rhyolite ash-flow tuff were accompanied by collapse of the roof of the growing batholith to form the Questa Caldera, a volcanic depression at least 14 km across. The ash flows traveled for tens of kilometers from the caldera rims to form a widespread sheet of densely welded tuff; ash also fell back to fill the subsiding caldera depression. Concurrent extension along northwest-trending faults segmented the volcanic edifice and rotated the originally sub-horizontal layers, so that some are nearly vertical. Formation of the caldera was accompanied by further batholith growth, involving intrusion of large plutons of granite, granodiorite, and related rocks into both caldera fill and the adjacent rocks, including both the earlier volcanic rocks and the basement rocks. The large molybdenum deposit along the Red River east of Questa is related to the emplacement of one of these late granitic plutons. Intrusive activity continued into the Miocene. Development of the Rio Grande Rift beginning at about 15 Ma was accompanied by development of the north-south trending normal faults along the western foot of the Taos Range. The rift is filled with thousands of meters of clastic sediments interleaved with basalt flows, some as young as 3.6 Ma. The bounding faults of the rift cut the Questa Caldera so that the western part of the original structure is now deeply buried beneath the rift fill.

New Mexico↗

USGS1988

A 250,000-year climatic record from Great Basin vein calcite: Implications for Milankovitch theory

A continuous record of oxygen-18 (δ 18 O) variations in the continental hydrosphere during the middle-to-late Pleistocene has been obtained from a uranium-series dated calcitic vein in the southern Great Basin. The vein was deposited from ground water that moved through Devils Hole—an open fault zone at Ash Meadows, Nevada—between 50 and 310 ka (thousand years ago). The configuration of the δ 18 O versus time curve closely resembles the marine and Antarctic ice core (Vostok) δ 18 O curves; however, the U-Th dates indicate that the last interglacial stage (marine oxygen isotope stage 5) began before 147 ± 3 ka, at least 17,000 years earlier than indicated by the marine δ 18 O record and 7,000 years earlier than indicated by the less well dated Antarctic δ 18 O record. This discrepancy and other differences in the timing of key climatic events suggest that the indirectly dated marine δ 18 O chronology may need revision and that orbital forcing may not be the principal cause of the Pleistocene ice ages.

Nevada↗

USGS2020

Cretaceous to Oligocene magmatic and tectonic evolution of the western Alaska Range: Insights from U-Pb and 40Ar/39Ar geochronology

New U-Pb and 40 Ar/ 39 Ar ages integrated with geologic mapping and observations across the western Alaska Range constrain the distribution and tectonic setting of Cretaceous to Oligocene magmatism along an evolving accretionary plate margin in south-central Alaska. These rocks were emplaced across basement domains that include Neoproterozoic to Jurassic carbonate and siliciclastic strata of the Farewell terrane, Triassic and Jurassic plutonic and volcanic rocks of the Peninsular terrane, and Jurassic and Cretaceous siliciclastic strata of the Kahiltna assemblage. Plutonic rocks of different ages also host economic mineralization including intrusion-related Au, porphyry Cu-Mo-Au, polymetallic veins and skarns, and peralkaline intrusion-related rare-earth elements. The oldest intrusive suites were emplaced ca. 104–80 Ma into the Peninsular terrane only prior to final accretion. Deformation of the northern Kahiltna succession and underlying Farewell terrane occurred at ca. 97 Ma, and more widespread deformation ca. 80 Ma involved south-vergent folding and thrusting of the Kahiltna assemblage that records collisional accretion of the Peninsular-Wrangellia terrane and juxtaposition of sediment wedges formed on the inboard and outboard terranes. More widespread magmatism ca. 75–55 Ma occurred in two general pulses, each having distinct styles of localized deformation. Circa 75–65 Ma plutons were emplaced in a transpressional setting and stitch the accreted Peninsular and Wrangellia terranes to the Farewell terrane. Circa 65–55 Ma magmatism occurred across the entire range and extends for more than 200 km inboard from the inferred position of the continental margin. The Paleocene plutonic suite generally reflects shallower emplacement depths relative to older suites and is associated with more abundant andesitic to rhyolitic volcanic rocks. Deformation ca. 58–56 Ma was concentrated along two high-strain zones, the most prominent of which is 1 km wide, strikes east-northeast, and accommodated dextral oblique motion. Emplacement of widespread intermediate to mafic dikes ca. 59–51 Ma occurred before a notable magmatic lull from ca. 51–44 Ma reflecting a late Paleocene to early Eocene slab window. Magmatism resumed ca. 44 Ma, recording the transition from slab window to renewed subduction that formed the Aleutian-Meshik arc to the southwest. In the western Alaska Range, Eocene magmatism included emplacement of the elongate north-south Merrill Pass pluton and large volumes of ca. 44–37 Ma andesitic flows, tuffs, and lahar deposits. Finally, a latest Eocene to Oligocene magmatic pulse involved emplacement of a compositionally variable but spatially concentrated suite of magmas ranging from gabbro to peralkaline granite ca. 35–26 Ma, followed by waning magmatism that coincided with initiation of Yakutat shallow-slab subduction. Cretaceous to Oligocene magmatism throughout the western Alaska Range collectively records terrane accretion, translation, and integration together with evolving subduction dynamics that have shaped the southern Alaska margin since the middle Mesozoic.

Alaska↗