USGS Science⌕ Search

SEARCH · USGS Science

Results for “Techniques and Methods”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54Linked to original sources
USGS2002

Discharge measurements using a broad-band acoustic Doppler current profiler

The measurement of unsteady or tidally affected flow has been a problem faced by hydrologists for many years. Dynamic discharge conditions impose an unreasonably short time constraint on conventional current-meter discharge-measurement methods, which typically last a minimum of 1 hour. Tidally affected discharge can change more than 100 percent during a 10-minute period. Over the years, the U.S. Geological Survey (USGS) has developed moving-boat discharge-measurement techniques that are much faster but less accurate than conventional methods. For a bibliography of conventional moving-boat publications, see Simpson and Oltmann (1993, page 17). The advent of the acoustic Doppler current profiler (ADCP) made possible the development of a discharge-measurement system capable of more accurately measuring unsteady or tidally affected flow. In most cases, an ADCP discharge-measurement system is dramatically faster than conventional discharge-measurement systems and has comparable or better accuracy. In many cases, an ADCP discharge-measurement system is the only choice for use at a particular measurement site. ADCP systems are not yet "turnkey"; they are still under development, and for proper operation, require a significant amount of operator training. Not only must the operator have a rudimentary knowledge of acoustic physics, but also a working knowledge of ADCP operation, the manufacturers' discharge-measurement software, and boating techniques and safety.

Open-File Report↗
USGS2008

Modified method for external attachment of transmitters to birds using two subcutaneous anchors

Of the transmitter attachment techniques for birds, the subcutaneous anchor provides a secure attachment that yields relatively few secondary effects. However, the use of subcutaneous anchors has been limited by transmitter size and retention time. Using a modified method of attachment that utilized two subcutaneous anchors, we deployed 69 GPS transmitters, plus 13 VHF transmitters that were similar in size and weight to GPS models, on Pacific Black Brant ( Branta bernicla nigricans ). Prior to our study, only harnesses were used for attaching GPS transmitters on birds, mainly because GPS transmitters are too large for other external attachment techniques and implantation in the body cavity attenuates the GPS signal. Thus, to increase the size capacity of anchor attachment and to avoid the well‐documented negative effects of harnesses on behavior and survival, we added a second anchor at the transmitter's posterior end. The double‐anchor attachment technique was quickly and easily accomplished in the field, requiring bird handling times of <10 min. Incidental recoveries of tagged Brant indicate a high degree of transmitter retention. Five recaptured birds (4–6 weeks after deployment) and eight killed by hunters (3–6 mo after deployment) retained their GPS transmitters. For studies involving the use of relatively large transmitters, the double‐anchor method appears to provide a viable alternative for external attachment.

Journal of Field Ornithology↗
USGS2005

Determination of total mercury in biological and geological samples

The analytical chemist is faced with several challenges when determining mercury in biological and geological materials. These challenges include widespread mercury contamination, both in the laboratory and the environment, possible losses of mercury during sample preparation and digestion, the wide range of mercury values commonly observed, ranging from the low nanogram per gram or per liter for background areas to hundreds of milligrams per kilogram in contaminated or ore-bearing areas, great matrix diversity, and sample heterogeneity1. These factors can be naturally occurring or anthropogenic, but must be addressed to provide a precise and accurate analysis. Although there are many instrumental methods available for the successful determination of mercury, no one technique will address all problems or all samples all of the time. The approach for the determination of mercury used at the U.S. Geological Survey, Crustal Imaging and Characterization Team, Denver Laboratories, utilizes a suite of complementary instrumental methods when approaching a study requiring mercury analyses. Typically, a study could require the analysis of waters, leachates or selective digestions of solids, vegetation, and biological materials such as tissue, bone, or shell, soils, rocks, sediments, coals, sludges, and(or) ashes. No one digestion or sample preparation method will be suitable for all of these matrices. The digestions typically employed at our laboratories include: (i) a closed-vessel microwave method using nitric acid and hydrogen peroxide, followed by digestion/dilution with a nitric acid/sodium dichromate solution, (ii) a robotic open test-tube digestion with nitric acid and sodium dichromate, (iii) a sealed Teflon? vessel with nitric acid and sodium dichromate, (iv) a sealed glass bottle with nitric acid and sodium dichromate, or (v) open test tube digestion with nitric and sulfuric acids and vanadium pentoxide. The common factor in all these digestions is that they are very oxidative to ensure the conversion of all mercury forms into Hg (II). Each method of digestion has its advantages and limitations. The method of detection used in our laboratories involves a combination of an in-house, custom, classic continuous-flow cold-vapor atomic absorption spectrometry (CVAAS), a commercially available, automated, flow-injection and a continuous flow cold-vapor atomic fluorescence spectrometry (CV-AFS) systems, and a relatively new, automated and integrated approach where solid or liquid samples are thermally decomposed under an oxygen atmosphere (a nitrogen atmosphere is used for coals) and the released mercury vapor trapped onto a gold gauze and then thermally released into an AAS system. Other less frequently used instrumental methods available for the determination of mercury include inductively coupled plasma ? optical emission spectrometry (ICP-OES), inductively couple plasma ? mass spectrometry (ICP-MS) (both solution nebulization and laser ablation), and instrumental neutron activation analysis (INAA). Results from two case studies involving the determination of mercury in the challenging matrices of biological materials will be presented. These will include fillet, liver and stomach-content samples from grayling for a baseline/background study in Alaska, and samples of meat tissue and shell material from Tanner crabs from Glacier Bay, Alaska. These studies show that the method of digestion is more important than a very sensitive detection limit for mercury.

Open-File Report↗
USGS1993

Estimation of hydraulic conductivity of a riverbed and aquifer system on the Susquehanna River in Broome County, New York

A three-dimensional finite-difference model of groundwater flow was used to estimate the hydraulic conductivity of riverbed and aquifer material in a 1-square-mile valley-fill aquifer system near a large river in which induced infiltration due to pumping cannot be measured directly. The aquifer consists of a 30- to 70-foot thickness of sand and gravel containing discontinuous layers of compact and silty sand and gravel. Horizontal hydraulic conductivity of the aquifer material, estimated through trial-and-error calibration of simulated water levels to drawdowns measured during an aquifer test, ranged from 500 to 10,000 feet per day; anisotropy (ratio of horizontal to vertical hydraulic conductivity) ranged from 125:1 to 250:1. The vertical hydraulic conductivity of the riverbed was estimated to be 0.1 to 0.5 foot per day, whereas permeameter tests on samples of silty sand and gravel layers from the riverbed yielded vertical hydraulic conductivity of 10 -3 foot per day. A sensitivity analysis indicated that a narrow range of anisotropy values gave the smallest residual error in simulated drawdowns. Residual error increased sharply when the maximum hydraulic conductivity value for the aquifer was lowered to less than 5,000 feet per day. Residual error also was large for large values of vertical hydraulic conductivity of the riverbed, but decreased to a constant amount for values less than 0.1 foot per day. Residual error was relatively insensitive to changes in the storage coefficient and specific yield. A nonlinear regression method that approximated the sensitivity matrix with a perturbation technique was applied to refine the estimates of these parameters and compute standard error of the estimates. The nonlinear regression indicated that the model was sensitive to hydraulic conductivity of the aquifer and anisotropy of the upper part of the aquifer but not to anisotropy of the lower part, and that vertical hydraulic conductivity of the riverbed was less than 0.5 foot per day. The regression method yielded aquifer hydraulic-conductivity values of 210 to 13,000 feet per day and an anisotropy ratio of 350:1 for the upper part of the aquifer; the standard error of these estimates was relatively small. In contrast, the standard errors of estimates of anisotropy in the lower part of the aquifer and the vertical hydraulic conductivity of the riverbed were extremely large.

New York↗
USGS2009

A nonlethal microsampling technique to monitor the effects of mercury on wild bird eggs

Methylmercury is the predominant chemical form of mercury reported in the eggs of wild birds, and the embryo is the most sensitive life stage to methylmercury toxicity. Protective guidelines have been based mainly on captive-breeding studies with chickens (Gallus gallus), mallards (Anas platyrhynchos), and ring-necked pheasants (Phasianus colchicus) or on field studies where whole eggs were collected and analyzed and the effects of the mercury were measured based on the reproductive success of the remaining eggs. However, both of these methods have limitations. As an alternative, we developed a technique that involves extracting a small sample of albumen from a live egg, sealing the egg, returning the egg to its nest to be naturally incubated by the parents, and then relating the hatching success of this microsampled egg to its mercury concentration. After first developing this technique in the laboratory using chicken and mallard eggs, we selected the laughing gull (Larus atricilla) and black-necked stilt (Himantopus mexicanus) as test subjects in the field. We found that 92% of the microsampled laughing gull eggs met our reproductive endpoint of survival to the beginning of hatching compared to 100% for the paired control eggs within the same nests. Microsampled black-necked stilt eggs exhibited 100% hatching success compared to 93% for the paired control eggs. Our results indicate that microsampling is an effective tool for nonlethally sampling mercury concentrations in eggs and, as such, can be used for monitoring sensitive species, as well as for improving studies that examine the effects of mercury on avian reproduction.

Environmental Toxicology and Chemistry↗
USGS1983

Determination of dissolved aluminum in water samples

A technique has been modified for determination of a wide range of concentrations of dissolved aluminum (Al) in water and has been tested. In this technique, aluminum is complexed with 8-hydroxyquinoline at pH 8.3 to minimize interferences, then extracted with methyl isobutyl ketone (MIBK). The extract is analyzed colorimetrically at 395 nm. This technique is used to analyze two forms of monomeric Al, nonlabile (organic complexes) and labile (free, Al, Al sulfate, fluoride and hydroxide complexes). A detection limit 2 ug/L is possible with 25-ml samples and 10-ml extracts. The detection limit can be decreased by increasing the volume of the sample and (or) decreasing the volume of the methyl isobutyl ketone extract. The analytical uncertainty of this method is approximately + or - 5 percent. The standard addition technique provides a recovery test for this technique and ensures precision in samples of low Al concentrations. The average percentage recovery of the added Al plus the amount originally present was 99 percent. Data obtained from analyses of filtered standard solutions indicated that Al is adsorbed on various types of filters. However, the relationship between Al concentrations and adsorption remains linear. A test on standard solutions also indicated that Al is not adsorbed on nitric acid-washed polyethylene and polypropylene bottle wells. (USGS)

Water-Resources Investigations Report↗
USGS2020

Change points in annual peak streamflows: Method comparisons and historical change points in the United States

Change-point, or step-trend, detection is an active area of research in statistics and an area of great interest in hydrology because change points may be evidence of natural or anthropogenic changes in climatic, hydrologic, or landscape processes. A common change-point technique is the Pettitt test; however, many change-point methods are now available and testing of methods has been limited. This study investigated eight methods for detecting change points in the location (central tendency, seven methods) and scale (dispersion or spread, one method) of annual peak streamflows, using simulated data with and without change points, and peak-streamflow series from basins with known large additions of reservoir storage. Parametric methods tested, including a Bayesian one, did not perform well, even when transforming peak streamflows to approximate normality by using logarithms. Nonparametric methods other than the Pettitt test allow for more than one change point but have an unacceptable number of false positives. Based on the results of our methods comparisons, we used the Pettitt and the Mood tests to find change points in location and scale, respectively, in thousands of streamgage records in the conterminous United States. Change points in location (median) and scale are abundant, with the changes in median peak streamflow showing regional patterns, as well as a strong increased streamflow signal around 1970. The changes in scale of peak streamflows are dominated more by temporal than spatial patterns; more streamgages had decreases in scale in earlier decades than recent decades and more streamgages had increases in scale occurring in recent decades than earlier decades.

Journal of Hydrology↗
USGS1975

Geochemical Exploration Techniques Applicable in the Search for Copper Deposits

Geochemical exploration is an important part of copper-resource evaluation. A large number of geochemical exploration techniques, both proved and untried, are available to the geochemist to use in the search for new copper deposits. Analyses of whole-rock samples have been used in both regional and local geochemical exploration surveys in the search for copper. Analyses of mineral separates, such as biotite, magnetite, and sulfides, have also been used. Analyses of soil samples are widely used in geochemical exploration, especially for localized surveys. It is important to distinguish between residual and transported soil types. Orientation studies should always be conducted prior to a geochemical investigation in a given area in order to determine the best soil horizon and the best size of soil material for sampling in that area. Silty frost boils, caliche, and desert varnish are specialized types of soil samples that might be useful sampling media. Soil gas is a new and potentially valuable geochemical sampling medium, especially in exploring for buried mineral deposits in arid regions. Gaseous products in samples of soil may be related to base-metal deposits and include mercury vapor, sulfur dioxide, hydrogen sulfide, carbon oxysulfide, carbon dioxide, hydrogen, oxygen, nitrogen, the noble gases, the halogens, and many hydrocarbon compounds. Transported materials that have been used in geochemical sampling programs include glacial float boulders, glacial till, esker gravels, stream sediments, stream-sediment concentrates, and lake sediments. Stream-sediment sampling is probably the most widely used and most successful geochemical exploration technique. Hydrogeochemical exploration programs have utilized hot- and cold-spring waters and their precipitates as well as waters from lakes, streams, and wells. Organic gel found in lakes and at stream mouths is an unproved sampling medium. Suspended material and dissolved gases in any type of water may also be useful media. Samples of ice and snow have been used for limited geochemical surveys. Both geobotanical and biogeochemical surveys have been successful in locating copper deposits in many parts of the world. Micro-organisms, including bacteria and algae, are other unproved media that should be studied. Animals can be used in geochemical-prospecting programs. Dogs have been used quite successfully to sniff out hidden and exposed sulfide minerals. Tennite mounds are commonly composed of subsurface material, but have not as yet proved to be useful in locating buried mineral deposits. Animal tissue and waste products are essentially unproved but potentially valuable sampling media. Knowledge of the location of areas where trace-element-associated diseases in animals and man are endemic as well as a better understanding of these diseases, may aid in identifying regions that are enriched in or depleted of various elements, including copper. Results of analyses of gases in the atmosphere are proving valuable in mineral-exploration surveys. Studies involving metallic compounds exhaled by plants into the atmosphere, and of particulate matter suspended in the atmosphere are reviewed these methods may become important in the future. Remote-sensing techniques are useful for making indirect measurements of geochemical responses. Two techniques applicable to geochemical exploration are neutron-activation analysis and gamma-ray spectrometry. Aerial photography is especially useful in vegetation surveys. Radar imagery is an unproved but potentially valuable method for use in studies of vegetation in perpetually clouded regions. With the advent of modern computers, many new techniques, such as correlation analysis, regression analysis, discriminant analysis, factor analysis, cluster analysis, trend-surface analysis, and moving-average analysis can be applied to geochemical data sets. Selective use of these techniques can provide new insights into the interpretatio

Professional Paper↗
USGS2020

Mapping the extent and methods of small-scale emerald mining in the Panjshir Valley, Afghanistan

Emerald mining in the Panjshir Valley, Afghanistan, has occurred for thousands of years, yet few records exist documenting the detailed spatial extent, techniques, or productivity of small-scale miners. This study proposes new methods to map and monitor the extent and changes in small-scale mining in remote and inaccessible terrain by integrating multispectral remote sensing analysis with archival geologic data and three-dimensional topographic change detection to examine emerald deposit zones and mining activity in the Panjshir Valley. Specifically, previously mapped geologic units known to host emeralds were re-analyzed using Landsat multispectral analysis to investigate the potential distribution of mining activity. Interpretation of very fine-resolution satellite imagery showed that mining activity is becoming more concentrated and transitioning from traditional tunneling methods to mechanized surface excavation. Finally, topographic change analysis of mechanized mine sites was combined with archival grade data to estimate production and consider improved recovery methods by small-scale miners.

Panjshir Valley↗
USGS2007

Application of information theory methods to food web reconstruction

In this paper we use information theory techniques on time series of abundances to determine the topology of a food web. At the outset, the food web participants (two consumers, two resources) are known; in addition we know that each consumer prefers one of the resources over the other. However, we do not know which consumer prefers which resource, and if this preference is absolute (i.e., whether or not the consumer will consume the non-preferred resource). Although the consumers and resources are identified at the beginning of the experiment, we also provide evidence that the consumers are not resources for each other, and the resources do not consume each other. We do show that there is significant mutual information between resources; the model is seasonally forced and some shared information between resources is expected. Similarly, because the model is seasonally forced, we expect shared information between consumers as they respond to the forcing of the resources. The model that we consider does include noise, and in an effort to demonstrate that these methods may be of some use in other than model data, we show the efficacy of our methods with decreasing time series size; in this particular case we obtain reasonably clear results with a time series length of 400 points. This approaches ecological time series lengths from real systems.

Ecological Modelling↗
USGS2019

Evaluation of artificial cover units as a sampling technique and habitat enhancement for madtoms in rivers

Instream habitat degradation and loss are major threats to freshwater fishes and critical conservation issues among nongame species, due to a lack of research and knowledge concerning their habitat requirements. Instream physical cover is an important component of fish habitat, especially for benthic species that require cover for reproduction and shelter from predators. One such species is the Carolina Madtom Noturus furiosus, a small, imperiled, nongame catfish endemic to the Neuse and Tar river basins of North Carolina. To enhance understanding of instream cover dynamics, we constructed artificial cover units from terra cotta materials and deployed them in rivers to (1) evaluate if they could be an effective passive sampling technique to estimate detection and occupancy of the Carolina Madtom, and (2) determine their potential to enhance habitat in systems where instream cover has been lost. Artificial cover units were deployed at 8 sites in the Neuse and Tar river basins, and collected 30 Carolina Madtoms at 2 sites in the Tar River basin. Occupancy modeling estimated Carolina Madtom detection probability using artificial cover units at 0.92. Compared to other standardized sampling methods, artificial cover units were an efficient, passive sampling technique for detecting Carolina Madtoms. Observations also revealed that artificial cover units were occupied by Carolina Madtoms for reproduction. These findings provide natural resource managers an additional means to assess the status of this imperiled species using an inexpensive, passive sampling device that can provide spawning habitat, protection from predators, and help mitigate effects of instream habitat degradation.

North Carolina↗
USGS2022

Special section overview: Effects of ecosystem change on North American percid populations.

Walleye Sander vitreus , Sauger S. canadensis , and Yellow Perch Perca flavescens (referred to as percids herein) are collectively among the most culturally and ecologically important fish species in North America. As ecosystems change in response to environmental drivers, such as climate change, nutrient loading, and invasive species, there is a need to understand how percid populations respond to these changes. To address this need, a symposium was held during the 81st Annual Midwest Fish and Wildlife Conference to bring fishery scientists and managers together to describe and discuss percid population responses to ecosystem change. Prevailing symposium themes included the challenge of identifying mechanisms responsible for population-level changes, developing strategies to adaptively manage for resilient fisheries, and consideration of scale, context, and methods when interpreting variable results. Given the uncertainty of how ecosystem changes affect percid populations, participants emphasized the importance of communicating uncertainties to stakeholders, implementing data-driven management strategies, setting realistic goals, and revising management actions in an adaptive framework. There was universal agreement on both the challenge and necessity of facilitating constructive engagement among stakeholders in cooperative decision making. Symposium participants identified knowledge gaps and discussed future efforts to build on our current understanding of percid populations, including continuation of long-term monitoring, improved standardization of evaluation metrics, implementing adaptive management experiments to identify causal relationships, development of more robust analytical methods, use of historical data sources, and refining techniques to realistically convey management options to stakeholders.

North American Journal of Fisheries Management↗
USGS2014

Caution on the use of NBS 30 biotite for hydrogen-isotope measurements with on-line high-temperature conversion systems

RATIONALE The supply of NBS 30 biotite is nearly exhausted. During measurements of NBS 30 and potential replacements, reproducible δ 2 H VSMOW-SLAP values could not be obtained by three laboratories using high-temperature conversion (HTC) systems. The cause of this issue has been investigated using the silver-tube technique for hydrogen-isotope measurements of water. METHODS The δ 2 H VSMOW-SLAP values of NBS 30 biotite, other biotites, muscovites, and kaolinite with different particle sizes, along with IAEA-CH-7 polyethylene, and reference waters and NBS 22 oil that were sealed in silver-tube segments, were measured. The effect of absorbed water on mineral surfaces was investigated with waters both enriched and depleted in 2 H. The quantitative conversion of hydrogen from biotite into gaseous hydrogen as a function of mass and particle size was also investigated. RESULTS The δ 2 H VSMOW-SLAP values of NBS 30 obtained by three laboratories were as much as 21 ‰ too high compared with the accepted value of −65.7 ‰, determined by conventional off-line measurements. The experiments showed a strong correlation between grain size and the δ 2 H VSMOW-SLAP value of NBS 30 biotite, but not of biotites with lower iron content. The δ 2 H VSMOW-SLAP values of NBS 30 as a function of particle size show a clear trend toward −65.7 ‰ with finer grain size. CONCLUSIONS Determination of the δ 2 H VSMOW-SLAP values of hydrous minerals and of NBS 30 biotite by on-line HTC systems coupled to isotope-ratio mass spectrometers may be unreliable because hydrogen in this biotite may not be converted quantitatively into molecular hydrogen. Extreme caution in the use and interpretation of δ 2 H VSMOW-SLAP on-line measurements of hydrous minerals is recommended.

Rapid Communications in Mass Spectrometry↗
USGS1984

Sampling design optimization for spatial functions

A new procedure is presented for minimizing the sampling requirements necessary to estimate a mappable spatial function at a specified level of accuracy. The technique is based on universal kriging, an estimation method within the theory of regionalized variables. Neither actual implementation of the sampling nor universal kriging estimations are necessary to make an optimal design. The average standard error and maximum standard error of estimation over the sampling domain are used as global indices of sampling efficiency. The procedure optimally selects those parameters controlling the magnitude of the indices, including the density and spatial pattern of the sample elements and the number of nearest sample elements used in the estimation. As an illustration, the network of observation wells used to monitor the water table in the Equus Beds of Kansas is analyzed and an improved sampling pattern suggested. This example demonstrates the practical utility of the procedure, which can be applied equally well to other spatial sampling problems, as the procedure is not limited by the nature of the spatial function. ?? 1984 Plenum Publishing Corporation.

Journal of the International Association for Mathe↗
USGS1992

Decomposition techniques

Sample decomposition is a fundamental and integral step in the procedure of geochemical analysis. It is often the limiting factor to sample throughput, especially with the recent application of the fast and modern multi-element measurement instrumentation. The complexity of geological materials makes it necessary to choose the sample decomposition technique that is compatible with the specific objective of the analysis. When selecting a decomposition technique, consideration should be given to the chemical and mineralogical characteristics of the sample, elements to be determined, precision and accuracy requirements, sample throughput, technical capability of personnel, and time constraints. This paper addresses these concerns and discusses the attributes and limitations of many techniques of sample decomposition along with examples of their application to geochemical analysis. The chemical properties of reagents as to their function as decomposition agents are also reviewed. The section on acid dissolution techniques addresses the various inorganic acids that are used individually or in combination in both open and closed systems. Fluxes used in sample fusion are discussed. The promising microwave-oven technology and the emerging field of automation are also examined. A section on applications highlights the use of decomposition techniques for the determination of Au, platinum group elements (PGEs), Hg, U, hydride-forming elements, rare earth elements (REEs), and multi-elements in geological materials. Partial dissolution techniques used for geochemical exploration which have been treated in detail elsewhere are not discussed here; nor are fire-assaying for noble metals and decomposition techniques for X-ray fluorescence or nuclear methods be discussed.

Journal of Geochemical Exploration↗
USGS2005

Inorganic, isotopic, and organic composition of high-chloride water from wells in a coastal southern California aquifer

Chloride concentrations were as high as 230 mg/L in water from the surface discharge of long-screened production wells in Pleasant Valley, Calif., about 100 km NW of Los Angeles. Wells with the higher Cl − concentrations were near faults that bound the valley. Depending on well construction, high-Cl − water from different sources may enter a well at different depths. For example, Cl − concentration in the upper part of some wells completed in overlying aquifers influenced by irrigation return were as high as 220 mg/L, and Cl − concentrations in water sampled within wells at depths greater than 450 m were as high as 500 mg/L. These high-Cl − waters mix within the well during pumping and produce the water sampled at the surface discharge. Changes in the major ion, minor ion, trace element, and δ 34 S and δ 13 C isotopic composition of water in wells with depth were consistent with changes resulting from SO 4 reduction, precipitation of calcite, and cation exchange. The chemical and isotopic composition of high-Cl − water from deep wells trends towards the composition of oil-field production water from the study area. Chloride concentrations in oil-field production water present at depths 150 m beneath freshwater aquifers were 2200 mg/L, and Cl − concentrations in underlying marine rock were as high as 4400 mg/L. High-Cl − concentrations in water from deeper parts of wells were associated with dissolved organic C composed primarily of hydrophobic neutral compounds believed to be similar to those associated with petroleum in underlying deposits. These compounds would not be apparent using traditional sampling techniques and would not be detected using analytical methods intended to measure contamination.

Applied Geochemistry↗
USGS1996

Use of liquefaction-induced features for paleoseismic analysis

Liquefaction features can be used in many field settings to estimate the recurrence interval and magnitude of strong earthquakes through much of the Holocene. These features include dikes, craters, vented sand, sills, and laterally spreading landslides. The relatively high seismic shaking level required for their formation makes them particularly valuable as records of strong paleo-earthquakes. This state-of-the-art summary for using liquefaction-induced features for paleoseismic interpretation and analysis takes into account both geological and geotechnical engineering perspectives. The driving mechanism for formation of the features is primarily the increased pore-water pressure associated with liquefaction of sand-rich sediment. The role of this mechanism is often supplemented greatly by the direct action of seismic shaking at the ground surface, which strains and breaks the clay-rich cap that lies immediately above the sediment that liquefied. Discussed in the text are the processes involved in formation of the features, as well as their morphology and characteristics in field settings. Whether liquefaction occurs is controlled mainly by sediment grain size, sediment packing, depth to the water table, and strength and duration of seismic shaking. Formation of recognizable features in the field generally requires a low-permeability cap above the sediment that liquefied. Field manifestations are controlled largely by the severity of liquefaction and the thickness and properties of the low-permeability cap. Criteria are presented for determining whether observed sediment deformation in the field originated by seismically induced liquefaction. These criteria have been developed mainly by observing historic effects of liquefaction in varied field settings. The most important criterion is that a seismic liquefaction origin requires widespread, regional development of features around a core area where the effects are most severe. In addition, the features must have a morphology that is consistent with a very sudden application of a large hydraulic force. This article discusses case studies in widely separated and different geological settings: coastal South Carolina, the New Madrid seismic zone, the Wabash Valley seismic zone, and coastal Washington State. These studies encompass most of the range of settings and the types of liquefaction-induced features likely to be encountered anywhere. The case studies describe the observed features and the logic for assigning a seismic liquefaction origin to them. Also discussed are some types of sediment deformations that can be misinterpreted as having a seismic origin. Two independent methods for estimating prehistoric magnitude are discussed briefly. One method is based on determination of the maximum distance from the epicenter over which liquefaction-induced effects have formed. The other method is based on use of geotechnical engineering techniques at sites of marginal liquefaction, in order to bracket the peak accelerations as a function of epicentral distance; these accelerations can then be compared with predictions from seismological models.

Engineering Geology↗
USGS2008

Evaluation of unsaturated zone air permeability through pneumatic tests

Predicting the steady state distribution of air pressure in the unsaturated zone resulting from a pneumatic test provides a method for determining air-phase permeability. This technique is analogous to the inverse problem of well hydraulics; however, air flow is more complicated than ground water flow because of air compressibility, the Klinkenberg effect, variations in air density and viscosity that result from temperature fluctuations in the unsaturated zone and the possibility of inducing water movement during the pneumatic test. An analysis of these complicating factors reveals that, when induced water movement can be neglected, a linear version of the airflow equation can provide an appropriate approximation for the purpose of determining air-phase permeability. Two analytical solutions for steady state, two-dimensional, axisymmetric airflow to a single well partially screened in the unsaturated zone are developed. One solution applies where there is a stratum of relatively low air permeability, separating the stratum in which the well is completed, from the atmosphere. The other solution applies where there is no separating stratum between the domain and atmosphere. In both situations the water table forms the lower horizontal boundary. Applications of both solutions to determine air permeability from data collected during pneumatic tests are presented.

Water Resources Research↗