Geology and coal resources of the Gulnare, Cuchara Pass, and Stonewall area, Huerfano and Las Animas Counties, Colorado
No abstract available.
Colorado↗
SEARCH · USGS Science
Results for “Journal of the Air & Waste Management Association”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Formation of the Mount Weld rare earth deposit, Western Australia: Geochronology constraints
Constraining the age of protracted chemical weathering in stable cratonic areas that may form thick regoliths and the potential enrichment of various elements is challenging. Economic deposits of aluminium, iron, copper, nickel, cobalt, niobium, and rare earth elements (REEs) form in this manner. Determining the age of formation can provide key information for exploration of similar deposits as well as to better constrain paleoclimatic conditions. This study describes our effort to constrain the age of formation of the Mount Weld deposit, a world-class carbonatite-derived REE laterite deposit. We utilize multiple geochronological techniques on different minerals. The oldest dates, ranging from ca. 100 to 50 Ma, were from laser ablation ICPMS, Lu-Hf dating of churchite, a heavy REE phosphate mineral formed by mineral saturation in groundwater. Growth bands on individual minerals show a younging outwards. 40 Ar/ 39 Ar geochronology of cryptomelane, a potassium-bearing manganese oxide mineral, yielded ages ranging from ca. 40 to 26 Ma. Similarly, (U–Th)/He geochronology of goethite yielded ages from ca. 45 to 19 Ma.
Mount Weld deposit↗
Potential for leakage among principal aquifers in the Memphis area, Tennessee
The principal aquifers in the Memphis area consist primarily of sand or sand and gravel, and the confining beds consist of clay, silt, sand, and lignite. The Jackson Formation and upper part of the Claiborne Group serve as the confining bed separating the water table aquifers from the Memphis Sand; the Flour Island Formation separates the Memphis Sand from the Fort Pillow Sand. Differences in total hydraulic head among the principal aquifers in the Memphis urban area result in vertical hydraulic gradients which create a potential for inter-aquifer exchange of water. Throughout this area, the gradient is downward from the water table aquifers to the Memphis Sand. In the central part of the Memphis urban area, the vertical hydraulic gradient is upward from the Fort Pillow Sand to the Memphis Sand, and in the eastern and western parts, it is downward from the Memphis Sand to the Fort Pillow Sand. The vertical distribution of carbon-14 data for water from the fluvial deposits, Memphis Sand, and Fort Pillow Sand shows an increase in the relative age of the water with depth. The areal distribution of carbon-14 data for water from the upper part of the Memphis Sand indicates that relatively recent water has been brought into the major cone of depression in the potentiometric surface of the Memphis Sand, either by horizontal movement or from downward vertical leakage. The normal, near-surface geothermal gradient in the Memphis area was determined to be 0.6 C/100 ft. Deviations from the normal geothermal gradient, in areas affected by intense pumping from the Memphis Sand, indicate that downward vertical leakage occurs from the water table aquifers through the Jackson-upper Claiborne confining bed to the Memphis Sand. The velocity of downward vertical leakage of water from the Memphis Sand through the Flour Island confining bed to the Fort Pillow Sand was determined to be 0.0066 ft/day by analysis of borehole temperature data from an observation well in the northeastern part of the Memphis area. From this velocity and the head difference between the Memphis Sand and the Fort Pillow Sand at this locality, the hydraulic conductivity of the Flour Island confining bed was determined to be 0.00114 ft/day. (Lantz-PTT)
Tennessee↗
Hydrogeologic investigation, framework, and conceptual flow model of the Antlers aquifer, southeastern Oklahoma, 1980–2022
The 1973 Oklahoma Groundwater Law (Oklahoma Statute §82–1020.5) requires that the Oklahoma Water Resources Board conduct hydrologic investigations of the State’s groundwater basins to support a determination of the maximum annual yield for each groundwater basin. Every 20 years, the Oklahoma Water Resources Board is required to update the hydrologic investigation on which the maximum annual yield determinations were based. The maximum annual yield allocated per acre of land is used to set the equal-proportionate share pumping rate. The maximum annual yield of 5,913,600 acre-feet per year and equal-proportionate-share of 2.1 acre-feet per acre per year currently (2025) in place for the Antlers aquifer were issued by the Oklahoma Water Resources Board on February 14, 1995. Because more than 20 years have elapsed since the 1995 final order for the Antlers aquifer was issued, the U.S. Geological Survey, in cooperation with the Oklahoma Water Resources Board, completed an in-depth hydrologic study that included a hydrogeologic framework and conceptual groundwater-flow model for the 1980–2022 study period. The results of an analysis of land use, long-term climate patterns, streamflow and base-flow patterns, historical groundwater use, as well as groundwater-level fluctuations across the Antlers aquifer are described. In addition, groundwater quality was analyzed for total dissolved solids concentrations and major ions for the Antlers aquifer. An updated hydrogeologic framework was developed that included refining the aquifer boundary in Oklahoma, the creation of new potentiometric surface and saturated thickness of fresh groundwater maps, one multiple-well aquifer test, slug tests, and an analysis of lithologic logs across the aquifer. A conceptual groundwater flow model and water budget were developed by incorporating estimates of recharge from precipitation, saturated-zone evapotranspiration, streambed seepage, lateral groundwater flows, vertical leakage, and withdrawals from groundwater wells.
Oklahoma, Texas↗
Fluid inclusion constraints on the geometry of the magmatic plumbing system beneath Mauna Loa – Part 2: Xenoliths
Mauna Loa volcano erupts crystal-poor material at its summit and more crystal-rich material on its rift zones. Some of the more olivine-rich lava flows contain xenoliths with diverse mineralogy, including cumulate harzburgites with high-Mg# orthopyroxenes and high-Fo olivines (both > 84). Previous experimental work and thermodynamic modelling has proposed that high-Mg# orthopyroxenes only crystallize from Mauna Loa melts at high pressures (> 6 kbar, > 20 km), leading to suggestions that there is a region of sub-Moho magma storage at Mauna Loa in addition to the geophysically imaged magma reservoir at 2–5 km depth below the summit. We use melt and fluid inclusion barometry combined with thermodynamic models to further investigate this suggestion. Fluid inclusion data from harzburgites and dunitic xenoliths yield storage depths remarkably similar to those found in non-xenolithic crystals from lavas and tephras, with a clear peak at ~ 2–3 km (below the summit). Depths from melt inclusions in these xenoliths overlap with fluid inclusion pressures, ruling out the possibility of fluid inclusion re-equilibration during a period of stalling in a shallower reservoir. We examine five different thermodynamic models and find that the minimum pressure of olivine-orthopyroxene co-saturation varies by ~ 4 kbar (~ 12 km). These models also fail to predict that orthopyroxene is stable in ~ 15–80% of compositionally relevant experimental charges which grew orthopyroxene. Overall, this shows that phase stability modelling is an unreliable method of determining magma storage depth at Mauna Loa. We suggest that model discrepancies reflect a lack of experimental constraints on orthopyroxene stability at > 1200 ℃ and 0.01–5 kbar. Based on the presence of large oikocrystic orthopyroxenes completely enclosing rounded olivine chadacrysts, we suggest that these harzburgitic xenoliths formed through the reaction of intruding melts with olivine mush piles within the Mauna Loa edifice at ~ 3 km depth below the summit, with no need for a deeper storage reservoir. The predominance of pre-eruptive shallow storage means that there is more chance of detecting reservoir destabilization with geophysical monitoring techniques compared to a scenario where melts are supplied from sub-Moho reservoirs.
Hawaii↗
U-Pb scheelite ages of tungsten and antimony mineralization in the Stibnite-Yellow Pine district, central Idaho
The Stibnite-Yellow Pine district contains the largest antimony resource in the United States, as well as significant gold, and is a historic producer of tungsten. Application of in situ laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) direct dating of scheelite from two Au-Sb-W ore deposits, Yellow Pine and Hangar Flats, yielded an older group of U-Pb ages in the range of 60.0 ± 2.8 to 57.0 ± 1.1 Ma and a younger U-Pb age for scheelite intergrown with stibnite of 47.4 ± 1.1 Ma. These in situ analyses were calibrated by isotope dilution-thermal ionization mass spectrometry (ID-TIMS) U-Pb lower intercept ages of two coarsely crystalline scheelite samples that yielded ages of 57.52 ± 0.22 and 56.62 ± 0.16 Ma. Scheelite of the latter age is of sufficient quality to serve as a primary reference material for LA-ICP-MS scheelite U-Pb geochronology. The group of older U-Pb scheelite ages agrees with 40 Ar/ 39 Ar ages of 56.9 ± 1.2 to 56.38 ± 0.54 Ma on adularia from Yellow Pine and Hangar Flats, whereas the younger U-Pb scheelite age is similar to an 40 Ar/ 39 Ar age of 46.00 ± 0.40 Ma on adularia from an epithermal gold-silver deposit in the adjacent Thunder Mountain caldera. Our results indicate that the main stage of tungsten mineralization occurred at ca. 57 Ma, whereas the main stage of antimony mineralization occurred at ca. 47 Ma—thereby providing first-time age constraints for antimony and tungsten mineralization in the Stibnite-Yellow Pine district.
Idaho↗
Water-quality assessment of the New England coastal basins in Maine, Massachusetts, New Hampshire, and Rhode Island: Environmental settings and implications for water quality and aquatic biota
The New England Coastal Basins in Maine, Massachusetts, New Hampshire, and Rhode Island constitute one of 59 study units selected for water-quality assessment as part of the U.S. Geological Survey's National Water-Quality Assessment (NAWQA) program. England Coastal Basins study unit encompasses the fresh surface waters and ground waters in a 23,000 square-mile area that drains to the Atlantic Ocean. Major basins include those of the Kennebec, Androscoggin, Saco, Merrimack, Charles, Blackstone, Taunton, and Pawcatuck Rivers. Defining the environmental setting of the study unit is the first step in designing and conducting a multi-disciplinary regional water-quality assessment. The report describes the natural and human factors that affect water quality in the basins and includes descriptions of the physiography, climate, geology, soils, surface- and ground-water hydrology, land use, and the aquatic ecosystem. Although surface-water quality has greatly improved over the past 30 years as a result of improved wastewater treatment at municipal and industrial wastewater facilities, a number of water-quality problems remain. Industrial and municipal wastewater discharges, combined sewer overflows, hydrologic modifications from dams and water diversions, and runoff from urban land use are the major causes of water-quality degradation in 1998. The most frequently detected contaminants in ground water in the study area are volatile organic compounds, petroleum-related products, nitrates, and chloride and sodium. Sources of these contaminants include leaking storage tanks, accidental spills, landfills, road salting, and septic systems and lagoons. Elevated concentrations of mercury are found in fish tissue from streams and lakes throughout the study area.
Maine, Massachusetts, New Hampshire, Rhode Island↗
Uppermost Oligocene and Miocene diatom biostratigraphy of Ocean Drilling Program Sites 682 and 688 from the Peru Margin
The diatom biochronology of ODP (Ocean Drilling Program) Holes 682A and 688E provides a detailed framework for refiningMiocene diatom zonation in the East Pisco Basin of southern Peru, establishing both a nearly complete offshore reference section and a correlation tool for the fragmentary onshore vertebrate-bearing deposits. This new biostratigraphic record documents a complete succession of low latitude and/or northeastern Pacific Miocene diatom zones, with two notable exceptions: a dissolution and/or hiatus interval (*16.5–14 Ma) during the Middle Miocene Climatic Optimum and a likely earliest Miocene hiatus (*23.4–21.8 Ma). Although eastern equatorial Pacific diatom zones characterize the Upper Oligocene and Lower Miocene strata, an increased abundance of cool-water diatoms that lived during the Middle and Late Miocene allows better application of northeast Pacific diatom zones, except during the Messinian (7–6 Ma) when warm-water diatoms predominate. The effects of eustatic sea level and tectonics on depositional sequences in the EPB and in offshore cores off central Peru are discussed.
Stratigraphy↗
Deep critical zone controls on shallow landslides
The deep critical zone (CZ) has long been recognized for its importance in influencing shallow landslides but was not considered feasible to include in slope stability models at the watershed scale. In this study, we demonstrate that simple approximations of the CZ in a fully coupled hydrologic and soil slope stability model can effectively capture the location, timing, and likely size of shallow landslides. To achieve this, we use coupled, process-based models that incorporate the effects of 1) deep CZ structures, 2) three-dimensional transient hydrology, and 3) multidimensional slope stability, calibrated with data from an intensively monitored field site. Our results show that the hydrologically active deep CZ guides groundwater flow, influencing where it drains from or exfiltrates to the soil mantle, producing distinct patterns of soil saturation and seepage forces at the soil-bedrock boundary. Deep conductive weathered critical zone drains the soil mantle, reducing the likelihood of destabilizing pore pressures, while the downslope thinning of the CZ forces groundwater to the surface. This creates localized instability and a tendency for similar-sized landslides across the landscape. In contrast, the absence of conductive weathered bedrock results in more widespread destabilizing pore pressures, leading to larger landslides and the likelihood of landslides earlier in a storm than in landscapes underlain by a deep CZ. Our findings suggest that first-order variations of deep CZ can provide physical explanations for variations observed in the susceptibility, magnitude, and timing of shallow landslides, and that CZ structure may be inferred from patterns and timing of landsliding.
Proceedings of the National Academy of Sciences↗
Groundwater source water assessment area delineation of public supply wells in the Treasure Valley, western Idaho
The Idaho Department of Environmental Quality (IDEQ) is responsible for assessing the source water for public water supply systems including the delineation of source water assessment areas for wells, which are defined as the subsurface areas contributing water to a well during a period of time. Part of the IDEQ assessment plan is to update source water assessments over time. The U.S. Geological Survey (USGS) developed a new groundwater-flow model for part of the western Snake River Plain aquifer in southwestern Idaho. This groundwater- flow model provided a new opportunity for IDEQ to update source water assessment for public water supply wells within the model boundary. The USGS, in cooperation with IDEQ, used the USGS Treasure Valley Groundwater Flow Model along with a MODPATH particle tracking post-processing program to reassess public-water supply source water assessment areas. The USGS created an automated script that requests a well location, depth, and pumpage rate, and then incorporates that information into the Treasure Valley Groundwater Flow Model combined with the MODPATH model to create 3-, 6-, and 10-year time of travel zones that are output to a geographic information system shapefile. The TVSWA_Delineator script provides a fast, transparent tool for IDEQ to reassess or create new public-water supply source water assessment area delineations based on new and updated information and is available as a Python script and a Windows executable with the compiled script and all necessary components. TVSWA_Delineator utilizes a quadtree approach to rediscretize the Treasure Valley Groundwater Flow Model grid around the pumping well location from 1-mile cell lengths telescoped down to 1/16 mile. This rediscretization increases the source water assessment area delineation resolution near the pumping well and minimizes the effect of weak sinks in the MODPATH model. The stress inputs for each month of the final 10 years (2006 to 2015) of the Treasure Valley Groundwater Flow model historical simulation were averaged for the particle tracking analysis. The MODPATH model used backwards tracking of particles released at each stress period to create the source water assessment area delineations. This report documents the creation of the TVSWA_Delineator Python script, including adaptations made to the Treasure Valley Groundwater Flow Model, creation of a companion MODPATH model, and post-processing results to provide source water assessment areas.
Idaho↗
An exploration of the relative influence of physical models for Omori’s law
Omori’s law states that the rate of aftershocks decays as a function of inverse time. There are multiple physical explanations that we reduce into a nonlinear mixed effects relation of three terms: (1) a Rate/State expression that can account for static/dynamic and viscoelastic triggering caused directly by the mainshock, (2) a fluid diffusion triggering term, and (3) a randomized secondary triggering (cascade) term. We fit free physical-model parameters to an observed aftershock sequence through two nonlinear regression methods to find the relative contributions of physics-based models in an observed aftershock sequence. Results from both methods show that Rate/State models overpredict aftershock rates by ∼0–30%. Secondary aftershocks cause a net negative contribution (seismicity rate reduction that corrects overprediction by other terms) ranging between ∼0 and 30%. All regression solutions yield negative secondary triggering contributions without being guided to do so. A physical explanation for this is that aftershock occurrence relieves stress from the crust, ultimately causing the sequence to extinguish itself. Fluid diffusion triggering contributions range from ∼0 to 20%. Diffusion processes are observed to be shorter in time than the full duration of an aftershock sequence and they are also spatially limited, diminishing their influence. Our results apply to an aftershock decay curve from the 2016 Central Apennines earthquake sequence, meaning that our specific results may not be general. Our primary conclusion is that any one physical model cannot alone fit the observed sequence as well as the combination of three we investigated.
Frontiers in Earth Science↗
Migration of seismicity from the mantle to the upper crust beneath Harrat Lunayyir volcanic field, Saudi Arabia
Harrat Lunayyir is a volcanic field in Saudi Arabia that experienced a Mw~5.4 earthquake driven by an upper-crustal dike intrusion in May 2009. This volcanic field has exhibited numerous forms of volcanic seismicity both prior to and since the 2009 dike intrusion. Significantly, earthquakes within the lithospheric mantle and, rarely, the lower crust are present in the two-decade long seismicity catalog of Harrat Lunayyir. Here we analyze 24 years of volcanic seismicity at Harrat Lunayyir from 1998 to 2022. We find that: 1) precursory seismicity began at least eight years prior to the 2009 event, with a particularly notable seismic episode one year prior; 2) lithospheric mantle seismicity is highly localized in space and in time, largely occurring in discrete sequences lasting on the order of a few hours to a few days; 3) one seismic sequence clearly migrates upward from the lithospheric mantle to the upper crust, including seismicity within the nominally ductile lower crust; 4) crustal seismicity has been slowly declining over time; and 5) lithospheric-mantle seismicity does not show any apparent decline with time. From these observations we infer that the seismicity is driven by magmatic fluids or volatiles, and seismic monitoring of this volcanic field should continue into the future.
Harrat Lunayyir volcanic field↗
Refining the earthquake history of south-central Alaska through lake records
The Alaska–Aleutian subduction zone (AASZ) is one of the world's most seismically active plate boundaries and the source of the 1964 M w 9.2 Great Alaska earthquake–the second largest instrumentally recorded earthquake in the world. Understanding the nature and frequency of such earthquakes is necessary for seismic and tsunami hazard assessment, but instrumental and historical records that span less than 150 years are too short to allow a statistically reliable analysis of earthquake recurrence times. This calls for studies of evidence of past earthquakes, extending the earthquake catalog further back in time. Subduction-zone paleoseismology in south-central Alaska is predominantly based on coastal evidence of land-level changes and tsunamis generated by megathrust earthquakes and preserved in the geological record. A complementary approach is lacustrine paleoseismology, which is still a relatively young discipline in Alaska. However, globally, lake basins are well-established high-resolution and continuous recorders of paleoseismic activity along subduction zones, relying on the identification of underwater landslide deposits and turbidites generated by seismic shaking. As a result, lake basins not only register ground shaking from megathrust earthquakes, but also from intraslab and crustal earthquakes, which are typically not accompanied by significant land-level changes. In this review paper, we combine coastal and lacustrine paleoseismology approaches to refine the south-central Alaskan earthquake history by comparing the paleoseismic records from two lakes (i.e., Eklutna Lake, located in the Chugach Mountain Range, and Skilak Lake, situated on the Kenai Peninsula) with the coastal and crustal earthquake catalog in Alaska. The resulting age ranges of all known megathrust earthquakes involving the Alaskan megathrust between the Kodiak and Prince William Sound (PWS) sections are more precise and accurate for the last 1.3 kyrs BP than the previously published age ranges from coastal records. As a result, this study supports the following key conclusions: (1) The 1964 CE earthquake was an exceptionally strong and unique event in the last 2000 years, rupturing the PWS, Kenai, Barren Islands, and Kodiak sections simultaneously. (2) The high-resolution and seasonal markings of the varved lake records now disentangle for the first time closely timed earthquakes, which was not possible based on the coastal evidence alone. (3) No persistent megathrust rupture boundaries exist. So, the possibility of a full rupture of the entire eastern AASZ, from PWS to Semidi cannot be excluded. (4) The rupture pattern in the eastern AASZ reveals superimposed cycles of multi-asperity ruptures (1964 earthquake) and clustered complementary partial ruptures, or rupture cascades. (5) The PWS section hosts the largest asperity in the eastern AASZ. (6) The shaking record of megathrust earthquakes indicates a time-dependent (quasiperiodic) behavior for the study area, but the observation of complementary clusters means that the hazards will not drop to zero but instead may even increase for a neighboring section. (7) The time-independent behavior of intraplate earthquakes implies that the intraslab hazard did not decrease following the 2016 and 2018 earthquakes. This study utilizes an integrated approach for subduction zone paleoseismology as a solution for unraveling recurrence and rupture patterns in Alaska, which can be applied worldwide.
Alaska↗
Overview of The SCEC/USGS Community Stress Drop Validation Study using the 2019 Ridgecrest earthquake sequence
We present initial findings from the ongoing Community Stress Drop Validation Study to compare spectral stress‐drop estimates for earthquakes in the 2019 Ridgecrest, California, sequence. This study uses a unified dataset to independently estimate earthquake source parameters through various methods. Stress drop, which denotes the change in average shear stress along a fault during earthquake rupture, is a critical parameter in earthquake science, impacting ground motion, rupture simulation, and source physics. Spectral stress drop is commonly derived by fitting the amplitude‐spectrum shape, but estimates can vary substantially across studies for individual earthquakes. Sponsored jointly by the U.S. Geological Survey and the Statewide (previously, Southern) California Earthquake Center our community study aims to elucidate sources of variability and uncertainty in earthquake spectral stress‐drop estimates through quantitative comparison of submitted results from independent analyses. The dataset includes nearly 13,000 earthquakes ranging from M 1 to 7 during a two‐week period of the 2019 Ridgecrest sequence, recorded within a 1° radius. In this article, we report on 56 unique submissions received from 20 different groups, detailing spectral corner frequencies (or source durations), moment magnitudes, and estimated spectral stress drops. Methods employed encompass spectral ratio analysis, spectral decomposition and inversion, finite‐fault modeling, ground‐motion‐based approaches, and combined methods. Initial analysis reveals significant scatter across submitted spectral stress drops spanning over six orders of magnitude. However, we can identify between‐method trends and offsets within the data to mitigate this variability. Averaging submissions for a prioritized subset of 56 events shows reduced variability of spectral stress drop, indicating overall consistency in recovered spectral stress‐drop values.
California↗
Rapid characterization of the 2025 Mw 8.8 Kamchatka, Russia earthquake
The 29 July 2025 M w 8.8 Kamchatka, Russia, earthquake was the sixth largest instrumentally recorded earthquake. This event was seismically well observed at regional and teleseismic distances, but publicly available near‐source data were sparse at the time of the event, presenting unique challenges for rapid source and impact characterization. The U.S. Geological Survey (USGS) National Earthquake Information Center provides global real‐time monitoring for earthquakes, including rapid response information products that estimate source characteristics, shaking, and the resulting impacts. We describe the USGS rapid response earthquake information products following the Kamchatka event and discuss their implications for ongoing hazards in the region. We describe potential improvements to our response workflows motivated by this event, including more rapid constraints on source geometries and the automated selection of fault geometries for finite‐fault inversions. The rapid response products together support the interpretation of a unilateral southwestward rupture with significant slip on the southwestern end of the rupture extent. The M w 8.8–9.0 event in 1952, which ruptured a comparable extent of the Kuril–Kamchatka subduction interface, has many similarities to the 2025 rupture. This illustrates that slip deficits may remain following great earthquakes and highlights the usefulness of comparative studies between historic and modern events.
Kuril-Kamchatka subduction zone↗
Water resources of Mellette and Todd counties, South Dakota
Mellette and Todd Counties are located in south-central South Dakota and have a combined area of 2,694 square miles. The White River and its tributaries, which include the Little White River, drain Mellette County and about one-half of Todd County. Tributaries to the Niobrara River, which include the Keya Paha River, drain the other one-half of Todd County. The average discharge of the Little White River is about 56 cubic feet per second as the river enters Todd County and is about 131 cubic feet per second as it discharges to the White River in northern Mellette County. The average discharge of the Keya Paha River just outside Todd County is about 39 cubic feet per second. The average annual runoff for Mellette and Todd Counties ranges from 0.94 to 2.36 inches based on records from nine streamflow-gaging stations in and near the counties. The average annual runoff is 1.62 inches, which compares with the average annual precipitation of about 19 inches. In Todd County, shallow wells completed in the alluvial, Ogallala, Arikaree, and White River aquifers generally can supply water that has low concentrations of dissolved solids, is fresh, and is soft to moderately hard. Ground water from shallow aquifers is limited in Mellette County; therefore, deep wells, often greater than 1,000 feet, are sometimes installed. The Pierre Shale often is used to supply rural domestic and stock wells in Mellette County even though well yields are low and the water has high dissolved solids, is moderately saline, and is very hard. Alluvial aquifers are present in both counties and store an estimated 1.6 million acre-feet of water. The water quality of the alluvial aquifers is dependent on the underlying deposits, and generally the water has low concentrations of dissolved solids, is fresh, and is soft to moderately hard where underlain by the Ogallala and Arikaree Formations; has moderate concentrations of dissolved solids, is slightly saline, and is hard where underlain by the White River Group; and has high concentrations of dissolved solids, is saline, and is very hard where underlain by the Pierre Shale. Also, yields often are lower where the alluvial aquifers are underlain by the Pierre Shale. The Ogallala aquifer is present in only Todd County, and the Arikaree aquifer is present throughout most of Todd County and southwestern and south-central Mellette County. The Ogallala aquifer contains an estimated 17 million acre-feet of water in storage, and the Arikaree aquifer contains an estimated 50 million acre-feet of water in storage. Both aquifers generally are suitable for irrigation, and yields from these aquifers are sometimes greater than 1,000 gallons per minute. Nitrate concentrations in 13 out of 92 water samples collected from the Ogallala aquifer exceeded the Primary Drinking Water Maximum Contaminant Level (MCL) of 10 milligrams per liter. In 11 out of 46 samples collected from the Arikaree aquifer, arsenic concentrations exceeded the MCL of 50 micrograms per liter. The White River aquifer, where present, is usually the shallowest source of ground water in Mellette County. The White River aquifer also is used in northern Todd County where the Ogallala and Arikaree aquifers are not present. The White River aquifer contains an estimated 50 million acre-feet of water in storage. Reported yields from the aquifer range from 1 to 30 gallons per minute, which generally is insufficient to support irrigation in most areas. However, yields are sufficient for livestock-watering and rural-domestic purposes. In both counties, the Pierre Shale is the shallowest bedrock aquifer and is exposed at the land surface throughout most of Mellette County. This aquifer is used primarily in Mellette County. Although the aquifer contains an estimated maximum of 1.5 million acre-feet of water in storage, it is not a viable source of ground water because the aquifer is relatively impermeable, yields are low, and water usually can be obtained from shallower sources, especially in Todd County. Reported yields from the Pierre Shale aquifer range from 1 to 8 gallons per minute. Because few test holes and wells penetrate below the Pierre Shale, little is known about the extent of the deeper bedrock aquifers. All wells completed in the Dakota Sandstone, Inyan Kara, and Minnelusa and Madison aquifers in the counties are used for stock-watering purposes. High concentrations of dissolved solids and hard water are characteristic of the water quality in the bedrock aquifers. Depths to the top of the deeper bedrock aquifers range from 1,270 feet to greater than 2,000 feet below land surface.
South Dakota↗
Are field observations of surface rupture useful? An example from the 2023 Mw 7.8 Pazarcık, Turkey (Türkiye), earthquake
Field investigations have long been an important component of the scientific response to surface‐faulting earthquakes. However, in light of advances in remote data and models, the question arises whether field‐based observations of surface rupture remain useful for understanding rupture processes and seismic hazards. We approach this question using a field‐based study of the central 2023 M w 7.8 Pazarcık, Turkey (Türkiye), earthquake rupture, at the intersection of the east Anatolian fault (EAF) and Narlı fault. Our field observations include the surface rupture expression and extent of the central EAF and northernmost Narlı fault in generally forested and steep terrain and 68 measurements of left‐lateral surface displacement. These data improve our understanding of the Pazarcık rupture complexity, resolve the surface geometry of the Narlı fault–EAF connection, and exhibit a clear (>2 m) change in surface displacement across this intersection zone that confirms remote‐based coseismic slip models. Our study shows that focusing field efforts in areas of obscured or low‐resolution remote data can yield essential data for refining rupture extent, documenting perishable on‐fault displacement, and improving postearthquake situational awareness. A comparison of similarly large‐magnitude continental surface‐rupturing earthquakes indicates that displacement uncertainties relate to a complex set of factors, including measurement methods, rupture complexity, and displacement magnitude. Our study validates the need for postearthquake field observations, which, when driven by clear motivating questions and knowledge of methodological strengths and limitations, provide high‐resolution rupture data that complement remote‐based models.
Pazarcık↗
California State Waters Map Series—Benthic habitat characterization in the region offshore Humboldt Bay, California
Coastal and Marine Ecological Classification Standard (CMECS) geoform, substrate, and biotic component geographic information system (GIS) products were developed for the California State Waters of northern California in the region offshore of Humboldt Bay. The study was motivated by interest in development of offshore wind-energy capacity and infrastructure in Federal waters offshore. This project, carried out by the U.S. Geological Survey (USGS), resulted in four data releases for individual map blocks that are part of the “California State Waters Map Series”: (1) Offshore of Arcata, (2) Offshore of Eureka, (3) Offshore of the Eel River, and (4) Offshore of Cape Mendocino. The study area consists of 436 square kilometers of multibeam echo sounder (MBES) data acquired by Fugro Pelagos, Inc., in 2007. Towed camera-sled video was acquired in 2009 and 2010 to supervise the classification of the MBES data into habitats, and single channel sparker data were collected to calculate sediment thickness above the transgressive unconformity. Using video observations of habitat as ground truth, derivatives of the MBES data were classified into 3 seafloor character types (hard-rugose, hard-flat, and soft-flat), 26 induration-slope-depth groups, and 15 geoforms. The study area substrate is predominantly soft-flat sediment (mud and fine sand) covering 73.6 percent of the area. Hard-flat substrate areas, predominantly coarse sediment in scour depressions, cover 5.4 percent of the study area. The hard-rugose substrate areas are primarily outcrops of layered sedimentary bedrock and constitute 20.9 percent of the study area. Fifteen geoforms were identified in the analysis. The predominant geoforms mirror the seafloor character results, shelf geoforms, rock outcrop geoforms, and scour depression geoforms. Rock and scour areas are restricted to the southern portion of the study area off Cape Mendocino where uplift has exposed bedrock. On the flat shelf area post-transgressive sediment varies in thickness from 1.7 meters (m) nearshore to 28.1 m offshore.
California↗