USGS Science⌕ Search

SEARCH · USGS Science

Results for “General Information Product”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54Linked to original sources

Capacity assessment for Earth Monitoring, Analysis, and Prediction (EarthMAP) and future integrated monitoring and predictive science at the U.S. Geological Survey

Executive Summary Managers of our Nation’s resources face unprecedented challenges driven by the convergence of increasing, competing societal demands and a changing climate that affects the stability, vulnerability, and predictability of those resources. To help meet these challenges, the scientific community must take advantage of all available technologies, data, and integrative Earth systems modeling capacity to better inform resource and risk management decisions. This is the overarching goal of the U.S. Geological Survey (USGS) Earth Monitoring, Analysis, and Prediction (EarthMAP) vision: “By 2030, the USGS will deliver well integrated observations and predictions of the future state of natural systems—water, ecosystems, energy, minerals, hazards—at regional and national scales, working primarily with federal, state, and academic partners to develop and operate the capability” (U.S. Geological Survey, 2021). Providing more integrated Earth systems science and actionable information to decision makers, stakeholders, and the public requires a better understanding of the depth and distribution of existing capacity (capabilities, tools, and techniques) across the Bureau. Identifying existing capacity is also a critical first step toward gap analysis and targeted investments to increase capacity over time. The USGS formed a Capacity Assessment Team (CAT) and charged it with (1) conducting a Request for Information (RFI) to identify existing USGS expertise and activities supportive of integrated and predictive science to inform decision making, (2) developing a strategy and proof-of-concept for a continuously updated capacity assessment capability, and (3) identifying lessons learned to inform development of best practices for future capacity assessment efforts. The RFI took the form of a survey, with content guided by the science and technology needs identified in a USGS report titled “Grand Challenges for Integrated U.S. Geological Survey Science—A Workshop Report” (Jenni and others, 2017). The 44-question survey provided respondents the ability to rate their level of experience with a suite of priority disciplines, analysis and modeling approaches, technologies, and stakeholder engagement strategies and to enter optional narrative text for supporting context. An introductory portion focused on general science capacity assessment, followed by three sections targeting capabilities related to the foundational components of EarthMAP: (1) data and information integration, (2) integrated predictive science, and (3) actionable information. The survey results provided a high-level snapshot of USGS capacity in the targeted areas. Respondents (1,035 individuals) represented approximately 13 percent of the USGS across all mission areas and regions. Seventy-four percent of the respondents held a science-focused position title and the remainder had position titles in information technology, computer science, management, administrative, or other (contractors, volunteers, emeritus, and unknown). To provide greater insight into respondent capabilities and activities, information from the U.S. Department of the Interior and USGS enterprise information systems were used to further characterize topical expertise and organizational associations of survey respondents. To address the ongoing need to assess the Bureau’s capacity to address integrated predictive science priorities, the CAT developed a software-based proof-of-concept called the Integrated Science Assessment Information Database (iSAID) for assembling various information sources together toward making the full extent of USGS capabilities and scientific assets available for routine capacity assessment. This proof-of-concept is intended to serve as a catalyst for further development. The process of implementing the EarthMAP capacity assessment survey, analyzing survey responses, and developing the proof-of-concept resulted in lessons learned, findings, and recommendations. Example scenarios throughout the report demonstrate how capacity assessment data can inform science planning. Three overarching findings and recommendations are: (1) Finding: Capacity is limited in some critical disciplines, skills, and technology applications, but “sufficient” depends on the question and the need relative to availability at a given point in time. Recommendation: Develop an on-demand capacity assessment framework that enables rapid identification and evaluation of existing and available expertise to support decision needs as they arise. (2) Finding: Institutional barriers and lack of awareness constrain the ability of USGS staff to adopt new technologies, collaborate across administrative boundaries, and deliver actionable information to stakeholders in a timely manner. However, these barriers are not universally experienced. Recommendation: Pursue more targeted inquiries to clarify which institutional barriers are obstructing the adoption of new technologies and approaches or the sharing of expertise and equipment across organizational and regional boundaries. These inquiries should inform USGS leadership, mission areas, and regions whether policies can be revised or whether a lack of understanding is creating perceived obstacles. Highlight cases when staff have successfully adopted new technologies and approaches to advance EarthMAP priorities and provide actionable information in a timely manner to spread awareness of how perceived obstacles can be navigated and overcome when appropriate. (3) Finding: Examples of people and projects integrating across disciplines and scales and applying advanced approaches to meet complex stakeholder needs exist. Such examples provide transfer value across the spectrum from approach to decision making. Many projects, already underway, appear to meet elements of the EarthMAP vision, and the USGS has people who can provide leadership in multiple types of specific integrated science efforts. Recommendation: Use these findings as a starting point for near-term strategic planning for integrated science. Highlight, incentivize, and build on existing interdisciplinary predictive science and information delivery activities across the USGS to advance toward further realization of an EarthMAP capacity. The CAT efforts to develop and assess existing USGS capacity to advance the EarthMAP vision revealed a fundamental challenge for not only this effort but any effort to assess existing capacity: A considerable amount of thought, time, and effort is required to survey and assess capabilities and tools available to support a given need, yet best results are still likely to provide an incomplete assessment. To better meet the frequent need to assess capabilities, tools, products, and projects that address an expressed strategic priority, the CAT proposes the concept of an on-demand capacity assessment framework supported by a software package that dynamically pulls and integrates information from existing USGS information systems and public domain registries. Although existing USGS enterprise information systems currently lack the structure, cross-system consistency, interoperability, and stability to support a continuously updated capacity assessment capability, we identify reasonable near-term steps to improve the utility of information gathered on expertise and project capacity and to improve the consistency and completeness of information and the ability of USGS systems to share that information. The ability to search and characterize this information will make future assessments of capacity faster, more complete, more efficient, and more targeted. This approach would grow the Bureau’s capacity knowledge over time, iteratively improving the ability to access, leverage, and synthesize existing capabilities and assets as well as identify and fill critical gaps. The greatest promise for developing integrated science could lie in linking across existing projects and expertise to create a multi-project capacity for addressing large, complex environmental issues.

Open-File Report↗

Simulation of groundwater flow and brine discharge to the Dolores River in the Paradox Valley, Montrose County, Colorado

Salinity, or total dissolved solids (TDS), of the Colorado River affects agricultural, municipal, and industrial water users and is an important concern in the Western United States. In the Paradox Valley of southwestern Colorado, natural discharge of sodium-chloride brine to the Dolores River from the underlying core of a salt-valley anticline accounts for about 6 percent of the salinity load to the Colorado River. Formation of the Paradox Valley began during the Miocene, and subsequent erosion exposed the Pennsylvania Paradox Formation in the core of the anticline where a cap rock, collapse features, breccia, and sodium-chloride saturated brine developed at the top of the exposed salt diapir. The discharge of brine to the Dolores River is affected by these dissolution features, along with seasonal hydrologic conditions and density-dependent flow between older dense brine and the younger fresh groundwater in the overlying alluvial aquifer. To reduce TDS concentrations in the Dolores River through the Paradox Valley, the Bureau of Reclamation has pumped brine from a series of shallow wells adjacent to the river since July 1996. The pumped brine is collected and piped to a deep disposal well where it is injected into the Mississippian Leadville Limestone at a depth of about 4,570-meters below land surface. The pumping and injection operation is collectively known as the Paradox Valley Unit (PVU), and by 2015, the PVU had substantially reduced TDS concentrations in the Dolores River by about 70 percent. Since 2019, injection-pressure limits and related seismic activity have constrained deep-well injection and thus brine pumping at the PVU. In cooperation with the Bureau of Reclamation, the U.S. Geological Survey developed a MODFLOW-6 three-dimensional, variable-density groundwater flow and TDS transport model of the Paradox Valley to evaluate the effects of PVU pumping operations on brine discharge to the Dolores River and to guide additional research. The finite-difference model grid consists of 76 rows and 48 columns oriented from northwest to southeast in alignment with valley topography and groundwater-flow directions in the near-surface freshwater alluvial aquifer. A 7-layer hydrogeologic framework was developed from existing datasets to represent the alluvial aquifer, cap rock, collapse breccia, and groundwater flow and TDS transport from the underlying Paradox Formation salt to the Dolores River. The model represents a 33-year transient calibration period from 1987 through 2020 that includes pre-PVU conditions from 1987 through June 1996 and post-PVU conditions from July 1996 through 2020. A 1,000-year simulation of groundwater flow and coupled TDS transport computed the initial conditions for the subsequent 33-year transient simulation. Observations of precipitation, streamflow, evaporation, agricultural land use, and PVU brine pumping rates were used to specify appropriate boundary conditions to the model representing time-varying recharge, tributary streamflow, groundwater underflow, evapotranspiration (ET), and PVU pumping. Values for average monthly streamflow and TDS concentration at the upstream streamgage, the Dolores River at Bedrock (USGS streamgage 09169500), were specified as model input where the Dolores River enters Paradox Valley. Observed pumping from the PVU, water levels and TDS concentrations in groundwater, and streamflow and estimated TDS concentrations at the downstream streamgage, the Dolores River near Bedrock (USGS streamgage 09171100), were calibration targets that constrained the manual calibration of model parameters representing aquifer hydraulic conductivity, storage, streambed conductance, recharge, and (ET). Two primary model-calibration targets were the match between observed and simulated TDS mass flux from PVU pumping wells and the match between estimated and simulated TDS mass flux to the Dolores River. The simulated TDS mass withdrawn by pumping wells is calculated by the model as the product of the assigned pumping rate and simulated groundwater TDS concentrations. Because actual pumping rates were assigned as simulated values, the total simulated PVU pumping for the 33-year calibration is within 0.5 percent of the observed values. However, simulated concentrations and thus mass flux of TDS withdrawn by the PVU pumping wells were consistently about 26 percent less than observed values for all the simulated time periods (33-year simulation, pre-PVU, and post-PVU). The representation of brine inflow was explored through additional modeling to evaluate the effect of the simulated brine source on groundwater TDS concentrations. Results indicated that a saturated-salt constant-flux brine source best replicated the magnitude and transient pattern observed for TDS mass flux from PVU pumping wells. The simulated TDS mass flux to the Dolores River is compared to estimates based on observed streamflow and specific conductance (SC) data for the downstream streamgage. The calibrated model provided a close fit of simulated to measured streamflow at the downstream streamgage, and the calibrated model fit to estimated TDS concentrations at the downstream streamgage was reasonable. The greatest differences between simulated and estimated values occurred during drought periods from June 2000 to March 2003, May 2012 to June 2013, and October 2013 to October 2014, when simulated TDS concentrations in the river were greater than estimated concentrations. In general, simulated TDS mass flux to the river for the pre-PVU period is in good agreement with estimated values (2-percent difference), but the model overestimated TDS mass flux to the river by about 41 percent during the post-PVU period. The model uncertainty with respect to TDS mass flux to the river indicates other processes or model parameters not well represented by the model are affecting the system, especially during drought. During model calibration, the most sensitive parameters were identified as vertical hydraulic conductivity of the alluvial aquifer, conductance of the Dolores River streambed, ET extinction depth and rate, and recharge rate. Five 5-year scenarios of conditions for 2021–25 were simulated to assist evaluation of alternative strategies to manage the discharge of brine into the Dolores River. The first scenario simulates no PVU pumping and serves as a base case for comparison to the other scenarios. Two scenarios simulate the effects of varying withdrawal timing at an annual rate about one-third less than during 2010 through 2018. During high-flow spring snowmelt runoff periods when brine discharge is naturally minimized, PVU pumping does not substantially affect salinity in the Dolores River, and comparison of these two scenarios indicates that scheduling brine withdrawals during times of low river stage is nearly as effective at reducing TDS mass flux to the river as pumping brine year-round. Cessation of pumping during periods of high river stage may be advantageous for system maintenance, brine injection, and seismic-risk reduction. The fourth scenario tested the effect of reducing irrigation-return flow on brine discharge and predicted a slight reduction of TDS mass flux to the Dolores River, but not as great a reduction as that of using the PVU to remove brine. The fifth scenario simulated 5 years of drought conditions without PVU pumping and indicates brine discharge during drought about 15 percent greater than during average hydrologic conditions. Results from scenario 5 are consistent with the calibrated model results and indicate that aquifer properties and ET processes and parameters may be affecting simulation results during drought. The Paradox Valley groundwater model provides a reasonable overall match to observed conditions in the Dolores River. The model is useful for evaluating relative differences between brine management scenarios to inform PVU operational decisions and to identify gaps in data and process understanding. Representation of the brine source, hydraulic-conductivity parameters, and recharge and ET processes were identified as potential areas for additional field and modeling research. Additional research in the Paradox Valley might include field-data collection that provides additional information on the hydrogeologic framework, groundwater levels, groundwater TDS concentrations, stream characteristics, and aquifer properties. Additional modeling efforts could benefit from applying advanced tools for model development, calibration, and visualization including parameter-estimation and sensitivity analysis. Statistical evaluation of known model uncertainties such as hydraulic conductivity, streambed conductance, representations of the brine source, recharge, and ET could improve the match between simulated and estimated TDS mass flux from PVU pumping wells and to the Dolores River further informing model predictions and system understanding for the Paradox Valley.

Colorado↗

The effects of management practices on grassland birds — An introduction to North American grasslands and the practices used to manage grasslands and grassland birds

The Great Plains of North America is defined as the land mass that encompasses the entire central portion of the North American continent that, at the time of European settlement, was an unbroken expanse of primarily herbaceous vegetation. The Great Plains extend from central Saskatchewan and Alberta to central Mexico and from Indiana to the Rocky Mountains. The expanses of herbaceous vegetation are often referred to as native prairie or native grasslands. Native grasslands share the characteristics of a general uniformity in vegetation structure, dominance by grasses and forbs, a near absence of trees and shrubs, annual precipitation ranging from 25 to 100 centimeters, extreme intra-annual fluctuations in temperature and precipitation, and a flat to rolling topography over which fires can spread. To the west of the Great Plains lie the sagebrush communities of the Great Basin, which extend from British Columbia and Saskatchewan to northern Arizona and New Mexico and from the eastern slopes of the Sierra Nevada and Cascade mountain ranges to western South Dakota. Sagebrush communities share similar characteristics to native grasslands, but their location east of the Rocky Mountains creates a more moderating influence from prevailing westerly winds that affect timing of peak precipitation and growth form of dominant vegetation. Native grasslands and sagebrush communities harbor a diverse array of grassland, wetland, and woodland plant and animal communities that are uniquely adapted to the natural forces of the Great Plains and Great Basin, namely the interactive forces of climate, fire, and grazing. The arrival of European settlers to North America brought profound change to native grassland and sagebrush communities, including the establishment of permanent towns and cities, the proliferation of cropland-based agricultural systems, and the suppression of wildfires. The near extirpation of bison by the 1860s paved the way for dramatic changes in the dominant grazers and a shift in the disturbance patterns that historically influenced vegetation structure. The greatest threat to native grasslands and sagebrush communities in modern times is their loss due to conversion to rowcrop agriculture and to urbanization. Concomitant with habitat loss is a precipitous decline in populations of bird species that evolved with, and are uniquely adapted to, the native grassland and sagebrush habitats. Avian population trends are linked strongly to agricultural land use. Besides outright loss of suitable breeding habitat, agricultural practices affect birds through factors such as pesticide exposure, habitat fragmentation, shifts in predator community composition, and occurrence of brood parasites. Bird populations face other stressors, such as loss of habitat to and behavioral avoidance of urbanized areas, roads, and infrastructure associated with energy production. Despite the many anthropogenic changes to North American grassland and sagebrush communities, some bird species are adaptable and opportunistic in their habitat selection and now utilize one or more human-created habitats. Human-created habitats include pastures, hayfields, agricultural terraces, crop buffer strips, field borders, grassed waterways, fencerows, road rights-of-way, airports, reclaimed coal mines, and planted wildlife cover. Fields of seeded grasslands enrolled in Federal long-term set-aside programs, such as the Conservation Reserve Program in the United States and the Permanent Cover Program in Canada, provide important nesting habitat for grassland bird species. The array of habitats used by birds makes habitat and avian management a complex undertaking, and the scale (for example, local, regional, international) at which management actions can be implemented are such that a universal approach to managing grasslands for the conservation of the entire suite of bird species does not exist. Experienced land managers recognize that it is impossible to manage for all bird species simultaneously, and thus, prioritization is necessary towards those habitats or bird species that the manager or management agency ranks highest for a specific region or management unit. The primary tools available for management are burning, grazing, mowing, herbicide application, and idling, but before choosing a particular practice, a manager will want to consider issues of seasonality, intensity, and frequency. Despite the thousands of studies that are cited in this compendium, much remains unknown about the effects of management practices on bird species. The series of species accounts in this compendium review the current state of knowledge regarding management of grassland and sagebrush bird species and summarize information on the effects of management practices on individual species. The accounts do not give definitive statements on the effects of management practices for any particular species, primarily because there are very few replicated studies in which identical management practices have been applied in the same geographical area with consistent results, which are elements necessary to provide concrete recommendations for the management of a particular species in a particular area. Documentation of the effects of management treatments on individual species through statistically sound methods that incorporate multiple years and locations will further scientists’ and land managers’ knowledge far more than 1–2-year studies that are limited in scope as well as time, but studies of that scope and breadth are rare.

Professional Paper↗

Preliminary hydrogeologic assessment and study plan for a regional ground-water resource investigation of the Blue Ridge and Piedmont provinces of North Carolina

Prolonged drought, allocation of surface-water flow, and increased demands on ground-water supplies resulting from population growth are focuses for the need to evaluate ground-water resources in the Blue Ridge and Piedmont Provinces of North Carolina. Urbanization and certain aspects of agricultural production also have caused increased concerns about protecting the quality of ground water in this region. More than 75 percent of the State's population resides in the Blue Ridge and Piedmont Provinces in an area that covers 30,544 square miles and 65 counties. Between 1940 and 2000, the population in the Piedmont and Blue Ridge Provinces increased from 2.66 to 6.11 million; most of this increase occurred in the Piedmont. Of the total population, an estimated 1.97 million people, or 32.3 percent (based on the 1990 census), relied on ground water for a variety of uses, including commercial, industrial, and most importantly, potable supplies. Ground water in the Blue Ridge and Piedmont traditionally has not been considered as a source for large supplies, primarily because of readily available and seemingly limitless surface-water supplies, and the perception that ground water in the Blue Ridge and Piedmont Provinces occurs in a complex, generally heterogeneous geologic environment. Some reluctance to use ground water for large supplies derives from the reputation of aquifers in these provinces for producing low yields to wells, and the few high-yield wells that are drilled seem to be scattered in areas distant from where they are needed. Because the aquifers in these provinces are shallow, they also are susceptible to contamination by activities on the land surface. In response to these issues, the North Carolina Legislature supported the creation of a Resource Evaluation Program to ensure the long-term availability, sustainability, and quality of ground water in the State. As part of the Resource Evaluation Program, the North Carolina Division of Water Quality, Groundwater Section, in cooperation with the U.S. Geological Survey, initiated a multiyear study of ground water in the Blue Ridge and Piedmont Provinces. The study began in 1999. Most of the study area is underlain by a complex, two-part, regolith-fractured crystalline rock aquifer system. Thickness of the regolith throughout the study area is highly variable and ranges from 0 to more than 150 feet. The regolith consists of an unconsolidated or semiconsolidated mixture of clay and fragmental material ranging in grain size from silt to boulders. Because porosities range from 35 to 55 percent, the regolith provides the bulk of the water storage within the Blue Ridge and Piedmont ground-water system. At the base of the regolith is the transition zone where saprolite grades into unweathered bedrock. The transition zone has been identified as a potential conduit for rapid ground-water flow. If this is the case, the transition zone also may serve as a conduit for rapid movement of contaminants to nearby wells or to streams with channels that cut into 1 U.S. Geological Survey, Raleigh, North Carolina. 2 North Carolina Department of Environment and Natural Resources, Division of Water Quality, Groundwater Section. or through the transition zone. How rapidly a contaminant moves through the system largely may be a function of the characteristics of the transition zone. The transition zone is one of several topics identified during the literature review and data synthesis, for which there is a deficiency in data and understanding of the processes involved in the movement of ground water to surface water. Because the Blue Ridge and Piedmont study area is so large, and the hydrogeology diverse, it is not feasible to study all of the area in detail. A more feasible approach is to select areas that are most representative of the land use, geology, and hydrology to obtain an understanding of the hydrologic processes in the selected areas, and transfer the knowledge from these local "type areas" to similar regional hydrogeologic areas. For the purpose of this study, the term "type area" applies to a 10- to 100-square mile area within a hydrogeologic terrane where information is sufficient to develop and test a concept of ground-water flow by using analytical or numerical methods that can be validated by field measurements. Ideally, these type areas are selected to be representative of the flow system that is present wherever a particular hydrogeologic terrane is present. This report consists of two basic parts. The first part describes the results of a comprehensive review and synthesis of information and literature that provides the basic background for the study. This includes current (2002) knowledge regarding general geology and the hydrogeologic framework of the fractured-rock aquifer system that underlies the Blue Ridge and Piedmont Provinces. In spite of the quantity of information identified during the literature review and the amount of past work that has been documented, there are still research needs to be met. The second part of the report describes State ground-water issues and problems, available data, and data deficiencies. It also describes the design and implementation of efforts to characterize ground-water quality and to quantify factors that influence the movement and availability of ground water in the hydrogeologic terranes characterized by (1) massive or foliated crystalline rocks overlain by thick regolith and (2) massive or foliated crystalline rocks overlain by thin regolith. As of September 2001, seven sites had been identified as potential study sites to be used to characterize the hydrogeology and water quality of ype areas considered representative of the larger terranes. Detailed geologic mapping, core drilling, well installation, and surface and borehole geophysical surveys are in progress at four of the sites.

North Carolina↗

Groundwater quality, age, and susceptibility and vulnerability to nitrate contamination with linkages to land use and groundwater flow, Upper Black Squirrel Creek Basin, Colorado, 2013

The Upper Black Squirrel Creek Basin is located about 25 kilometers east of Colorado Springs, Colorado. The primary aquifer is a productive section of unconsolidated deposits that overlies bedrock units of the Denver Basin and is a critical resource for local water needs, including irrigation, domestic, and commercial use. The primary aquifer also serves an important regional role by the export of water to nearby communities in the Colorado Springs area. Changes in land use and development over the last decade, which includes substantial growth of subdivisions in the Upper Black Squirrel Creek Basin, have led to uncertainty regarding the potential effects to water quality throughout the basin. In response, the U.S. Geological Survey, in cooperation with Cherokee Metropolitan District, El Paso County, Meridian Service Metropolitan District, Mountain View Electric Association, Upper Black Squirrel Creek Groundwater Management District, Woodmen Hills Metropolitan District, Colorado State Land Board, and Colorado Water Conservation Board, and the stakeholders represented in the Groundwater Quality Study Committee of El Paso County conducted an assessment of groundwater quality and groundwater age with an emphasis on characterizing nitrate in the groundwater. Groundwater-quality samples were collected from 50 randomly selected wells between May and June 2013. The samples were analyzed for major ions, nutrients, dissolved gases, tritium ( 3 H), chlorofluorocarbons (CFC-11, CFC-12, and CFC-113), and fuel products (such as benzene, toluene, ethylbenzene, and xylenes). None of the groundwater samples exceeded the U.S. Environmental Protection Agency (EPA) National Primary Drinking Water Regulations for primary maximum contaminant levels (MCL) for major ions. Secondary maximum contaminant levels, which are not health concerns and affect mainly taste, color, or odor of the water, were observed in rare instances for pH (2 samples), chloride (1 sample), iron (3 samples), and manganese (8 samples). The secondary maximum contaminant level for total dissolved solids was also exceeded for two samples. Nitrate (nitrite plus nitrate as nitrogen in groundwater) was elevated above the estimated background concentration of natural recharge waters of 1 milligram per liter (mg/L) in 44 of the 50 wells sampled and showed a median concentration of 5.4 mg/L. Nitrate concentrations were above the MCL of 10 mg/L in 5 of the 50 wells sampled and above half of the EPA MCL (5 mg/L) in 27 of the 50 wells sampled, which included samples above the MCL. Dissolved-oxygen concentrations exceeded 0.5 mg/L in 95 percent of reported values (40 of 42 samples) and exceeded 2.0 mg/L in 90 percent of reported values (38 of 42 samples). The oxidized conditions observed in most areas indicate that nitrate from fertilizers and animal or human waste was geochemically stable and could persist in the groundwater for decades or perhaps longer. A historical analysis of median nitrate concentrations over nearly three decades showed an increase in nitrate of approximately 1 mg/L from 4.3 to 5.4 mg/L, although the increase was not determined to be significantly different using nonparametric statistical methods. Major-ion data indicate that groundwater representative of the primary aquifer was classified as calcium-sodium bicarbonate type water. Other water samples from wells located mainly along the periphery of the primary aquifer had cation-anion compositions consistent with distinct water sources, including groundwater contributions from the underlying bedrock aquifers. The areas with differentiable water sources were located mainly where alluvial deposits were thin and geologic contacts to the underlying bedrock aquifers were relatively shallow. Nitrate concentrations in the groundwater were evaluated for relations to land use. An agricultural region was defined using a sequence of land satellite imagery. Groundwater flow directions interpreted from median water-table elevations measured from 2000 to 2013 were used in conjunction with cropland locations to define the agricultural region boundaries by encompassing potential pathways of nitrate transport in the groundwater from nitrogen-based fertilizers. A statistically significant higher median nitrate concentration was observed for areas inside the agricultural region (6.7 mg/L) compared to areas outside the agricultural region (2.3 mg/L), although median concentrations in both areas were below the MCL (10 mg/L). Median nitrate concentration was also significantly greater in land parcels with septic use (4.9 mg/L) compared to nonseptic parcels (1.7 mg/L). In general, agriculture or septic use was identified as the primary source of nitrate, depending on location, while commercial, county, grazing, and residential land uses were generally secondary sources of nitrate. Apparent groundwater ages were estimated from chlorofluorocarbons (CFC-11, CFC-12, and CFC-113) and tritium ( 3 H) data using models that assumed piston flow and binary mixing (dilution of a young component with old, tracer-free water). The mean and median groundwater ages were about 30 years and the standard deviation was 6 years, indicating that most groundwater in the primary aquifer was “young” water that had recharged to the aquifer over the last few decades (post-1950s). The median fraction of young water was about 71 percent, and the standard deviation was 29 percent. The remaining water predated the 1950s, which may have originated from deeper geologic formations or may represent slow moving groundwater within the primary aquifer. Some of the oldest groundwater ages (older than 30 years) were observed in the upper reaches of the aquifer to the northwest where the primary aquifer is thin and intersects bedrock, supporting the hypothesis of geochemically distinct groundwater entering the primary aquifer from below. Groundwater that had reached the central part of the aquifer from upgradient areas of the basin was variable in age because of differences in flow paths and travel velocities. The groundwater age analysis showed that current (2013) land-use practices could affect water quality over decades to come, and that responses to remedial actions could be slow, especially for constituents, such as nitrate, that are stable under oxidized conditions. Fuel products (including acetone, benzene, diisopropyl ether, ethylbenzene, methyl acetate, methyl tertiary butyl ether (MTBE), methyl tert-pentyl ether, m- + p-xylene, o-xylene, tert-amyl alcohol, tert-butyl alcohol, tert-butyl ethyl ether, and toluene) were analyzed in groundwater from 49 of the 50 wells. Water from seven sites had detections for fuel compounds; all concentrations were below MCL. The results provided assurance of water quality and a valuable baseline to evaluate future trends of fuel constituents as the region is further developed. Probability maps were developed from logistic regression models to examine the likelihood that nitrate concentrations in groundwater exceeded specified levels. Susceptibility analysis examined relations between mid-level (5.0 mg/L) nitrate concentrations and climatic, hydrologic, and geologic variables; the significant variables were identified as depth to groundwater, soil organic matter, and soil water storage to 25-centimeter (cm) depth. The vulnerability assessments included natural factors driving susceptibility but also human factors related to land use and septic use. Vulnerability to low-level (2.5 mg/L) nitrate was related to depth to groundwater, septic zoning, and soil organic matter. The results highlighted that septic zoning affected low-level nitrate concentrations. Vulnerability to mid-level (5.0 mg/L) nitrate was examined using all 50 samples and also with two data outliers removed, which showed relatively high nitrate concentrations but also anomalous water chemistry or were located beyond the primary study area. Vulnerability to mid-level (5.0 mg/L) nitrate using all 50 samples was related to depth to groundwater, land use, septic use within a 500-meter (m) radius, soil water storage to a 25-cm depth, soil organic matter, and whether a location was within the agricultural region. The mid-level (5.0 mg/L) vulnerability model using 48 samples (two outliers removed) produced the best overall fit and was related to the same variables as when using all samples except septic use. The results for mid-level vulnerability provided additional support that septic use was associated with low levels of nitrate in the groundwater. Soil properties and land use were identified as the main drivers of moderate nitrate concentrations. Probabilities of exceeding low-level nitrate concentrations were high in most areas with the lowest probabilities usually to the northwest along thin geologic deposits in the upper part of the basin. The results of this investigation offer the foundational information needed for developing best management practices to mitigate nitrate contamination, basic concepts on water quality to aid public education, and information to guide regulatory measures if policy makers determine this is warranted. Science-based decision making will require continued monitoring and analysis of water quality in the future.

Colorado↗

Geology of possible petroleum provinces in Alaska

The history of petroleum exploration in Alaska and the geology of possible petroleum provinces in Alaska are reviewed. Maps showing Alaska's major Mesozoic and Tertiary tectonic elements, possible petroleum provinces, and indications of petrol, are included in this report. Annotated references in Geological Survey publications relating to petroleum and oil shale in Alaska are given at the end of the report. For the purpose of appraising its petroleum possibilities, Alaska is divided into the southern, central, and northern major geologic-physiographic regions. Southern Alaska includes the arcuate mountain chain formed by the Alaska and Aleutian Ranges and the Mentasta- Nutzotin Mountains, the coastal range and valley area to the south, and the southeastern Alaska "panhandle" -- an area of 185,000 square miles. Oil seeps on the west shore of Cook Inlet in southern Alaska were known as early as 1853, and claims were staked in this region in 1882. Drilling began near the oil seeps in the Katalla district about 1901, and this started Alaska's first period of oil activity. From 1902 to 1933 the Katalla field produced 154,000 barrels of oil from fractured shale and sandstone of Tertiary age the- first and only commercial production in Alaska. On the basis of geology, surficial indications of petroleum, and test wells drilled, six possible petroleum provinces are indicated in southern Alaska. They are Heceta Island area, Keku Islands area, Cook Inlet Mesozoic province, Gulf of Alaska Tertiary province, Cook Inlet Tertiary province, and Copper River basin. The exposed rocks in the Heceta Island area include lower Paleozoic graywacke-type sandstone, sandstone, conglomerate, and massive limestones with reeflike structures; igneous rocks are rare or lacking in much of the area. The Kosciusko-Tuxekan-Heceta synclinorium, the main structural feature, is modified by minor folds and faults. Some of the minor folds are reported to be broad and open, with flanks dipping 20°-145°. As far as known, the Heceta Island area has not heretofore been seriously considered as a possible petroleum province. Rocks of Silurian to Cretaceous age are exposed in the Keku Island area and include moderately folded and relatively unaltered limestone and other marine sedimentary rocks. The Cook Inlet Mesozoic province, a land area of approximately 18,500 square miles, includes a great thickness of unmetamorphosed marine sedimentary rocks of Jurassic and Cretaceous age. At least 23 test wells were drilled or started in this province by the end of 1955. Shows of oil and gas were encountered in many of these wells. During 1955 at least ten oil companies were active in this area and by the end of 1955 about 1 1/2 million acres were included in oil and gas leases applied for or granted. The Gulf of Alaska Tertiary province includes about 5,200 square miles in which rocks of Tertiary age are exposed or are believed to underlie Quaternary deposits. Between 1901 and the end of 1955 about 47 wells were drilled or started in this province. The Cook Inlet Tertiary province embraces an area of about 9,500 square miles, of which about 4,100 is covered by the shallow waters of Cook Inlet. Petroleum exploration has been in that part of the area which overlaps the Cook Inlet Mesozoic province. Eocene or younger Tertiary nonmarine sedimentary rocks are believed to underlie much of the province, and marine rocks of Tertiary age may also be present. The Copper River basin is a topographic basin underlain by unconsolidated deposits of Quaternary age. Tertiary rocks favorable for the accumulation of petroleum may underlie part of the basin but this is not believed likely. Except for some leasing activity no petroleum exploration has been recorded in the Copper River Basin to the end of 1955. Central Alaska is a region of about 275,000 square miles and consists of an irregular assemblage of intricately dissected uplands and alluvium-floored lowland basins. Scattered peaks of resistant intrusive igneous rocks surmount most of the upland areas. In the vast region of central Alaska only six test wells are known to have been drilled for the purpose of finding oil and gas. The maximum depth reached was 350 feet and the holes were mostly or entirely in Quaternary deposits. In recent years several oil companies have investigated some parts of the region and large areas in the Yukon-Koyukuk province are now under lease. Oil seeps, gas seeps, and other indications of petroleum have been reported from many localities; samples from two localities have been analyzed and reported to be petroleum. The geology of central Alaska is similar in a general way to that of the area between the Rocky Mountains and Sierra-Cascade belts of the United States. Sedimentary rocks, probably equivalent to the Precambrian Belt series, and rocks of the Cambrian and all younger geologic systems have been recognized in central Alaska. The structure of the region is known to be complex, but except in local mineral districts, it has not been mapped in detail. Based on the limited amount of available information, the region cannot be regarded as distinctly favorable for significant accumulations of petroleum. However, three pre-Cenozoic provinces, the Yukon-Koyukuk, the Kobuk, and the Kandik, and several large Cenozoic basin provinces may be worthy of further investigation. Northern Alaska includes the Brooks Range and all the treeless tundra north to the Arctic Coast, an area of about 125,000 square miles. The presence of oil seeps along the Arctic Coast has been known at least since 1900 and a description of the Cape Simpson oil seeps vas published in 1909. Since then oil and gas seeps have been described from nine localities, and oil shales and oil-bearing sandstones are known from many localities in the Arctic Foothills province. Oil and gas deposits have been discovered and geologic conditions are favorable for oil and gas accumulations in approximately half of the region. In 1923 approximately 37,000 square miles in northern Alaska was reserved by Executive order as Naval Petroleum Reserve No. 4. In 1944 the U. S. Navy began a vast petroleum exploration program which was suspended in 1953. In the years 1945 through 1955, 37 test wells and 45 core tests were drilled on 18 structures. Three oil fields, Umiat, Simpson, and Fish Creek, and two gas fields, South Barrow and Gubik, were discovered. Total reserve estimates for all discoveries of oil to 1955 range from 30 to 100 million barrels, and for gas, from 370 billion to 900 billion cubic feet. All northern Alaska, with the exception of the Brooks Range, can be considered a possible petroleum province, but the region can be subdivided into provinces of somewhat different potentialities. These subdivisions roughly correspond with the geomorphic provinces and sections, which in turn reflect differences in geology. The known oil-bearing beds are of Mesozoic age, primarily Cretaceous, and thus the possible petroleum provinces could be designated as Mesozoic. However, Paleozoic and Cenozoic rocks with favorable reservoir characteristics are exposed in the region and possibly underlie, in favorable structural situations, some of the areas as yet not tested. The Arctic Coastal Plain province includes gently folded and flat-lying Mesozoic beds that overlie a basement complex of Paleozoic and early Mesozoic age. Near the southern edge of this province the basement rocks are at depths of at least 20,000 feet, and to the north these rocks rise to within 2,500 feet of the surface. The Teshukpuk Lake section of the Arctic Coastal plain includes many of the known oil seeps; it is the most accessible to sea transportation, and lies almost completely within NPR 4. Thirteen test wells and 35 core tests have been drilled here; one gas field and two (at present, noncommercial) oil fields have been discovered. The possibility of further discoveries may depend largely on locating porous sandstones in stratigraphic rather than anticlinal traps. The White Hills section is distinguished topographically from the Teshukpruk section by its white-gravel-covered hills and fever lakes, and geologically by the presence of Tertiary rocks, including 2,000 feet of nonmarine beds in the west and at least 7,000 feet of marine beds to the east, in the vicinity of Carter Creek. This section appears to be more complex structurally. No test wells have been drilled in the White Hills section. The Northern Foothills section includes many closed anticlines. Twenty-four test wells and ten core tests have been drilled on 11 structures and two discoveries have been made -the Umiat oil field and the Gubik gas field. All these tests have been drilled in Cretaceous rocks. The Southern Foothills section is structurally similar to the Alberta Foothills and to the northern part of the Brooks Range. Great thicknesses of marine shale of Lover Cretaceous, Jurassic, and Triassic age are exposed. The outcropping Mesozoic sandstones are generally poorly sorted, nonporous, and impermeable. To the south the section is bordered by mountainous exposures of Mississippian limestone, which probably underlie at least part of this section. The rocks that underlie the deeply eroded complex structures of the Brooks Range include schist, slate, argillite, and limestone. Some exposed limestones have a strong petroleum-like odor and contain traces of petroleum residues.

Alaska↗

Long-term groundwater availability in the Waihe‘e, ‘Īao, and Waikapū aquifer systems, Maui, Hawai‘i

Groundwater levels have declined since the 1940s in the Wailuku area of central Maui, Hawai‘i, on the eastern flank of West Maui volcano, mainly in response to increased groundwater withdrawals. Available data since the 1980s also indicate a thinning of the freshwater lens and an increase in chloride concentrations of pumped water from production wells. These trends, combined with projected increases in demand for groundwater in central Maui, have led to concerns over groundwater availability and have highlighted a need to improve general understanding of the hydrologic effects of proposed groundwater withdrawals in the Waihe‘e, ‘Īao, and Waikapū areas of central Maui. A numerical groundwater model was constructed to simulate the flow and salinity of groundwater in central Maui. The model simulates the effects of changes in groundwater withdrawals and recharge on water levels, freshwater-lens thicknesses, and chloride concentrations of pumped water from production wells. The model incorporates updated water-budget estimates of groundwater recharge from infiltration and direct recharge, seepage in stream channels, and inflow from inland areas. Mean annual groundwater recharge from infiltration and direct recharge was estimated using a daily water-budget model and the most current data, including the distributions of monthly rainfall and potential evapotranspiration, for the study area for nine historical periods from 1926 through 2012: 1926–69, 1970–79, 1980–84, 1985–89, 1990–94, 1995–99, 2000–04, 2005–09, and 2010–12. The water-budget model also estimated groundwater recharge based on one hypothetical scenario that used 1980–2010 rainfall and 2017 land cover. For the nine historical periods, estimated recharge from infiltration and direct recharge within the area of the groundwater model ranged from 30.4 million gallons per day (Mgal/d) during 2010–12 to 98.7 Mgal/d during 1926–69. Variability in recharge during these periods mainly reflects changes in rainfall and irrigation over time. Between 2010 and 2014, streamflow restoration in previously diverted streams resulted in an estimated increase in recharge from seepage in stream channels of about 12.5 Mgal/d. Average groundwater inflow of about 39.6 Mgal/d from inland, dike-intruded areas to the main area of interest was estimated from an existing island-wide numerical groundwater-flow model, which is at a larger scale and incorporates a greater number of simplifying assumptions. The numerical groundwater model developed for this study was calibrated to 1926–2012 transient water levels, vertical salinity profiles, and chloride concentrations of water pumped by production wells in the study area. The model was then used to evaluate one future recharge and six selected withdrawal scenarios, developed in consultation with the Maui Department of Water Supply, in terms of long-term changes in water level and 50-percent ocean-water salinity surface. The groundwater model was also used to simulate the future salinity of water withdrawn by existing and proposed production wells. The simulations were run to steady-state conditions, providing an estimate of the long-term effects of changes in withdrawal and recharge on the groundwater resource. Results of the simulated future withdrawal scenarios indicate that, relative to 2017–18 rates, the scenarios’ long-term effect of increased withdrawals ultimately leads to lower water levels and a higher 50-percent ocean-water salinity surface indicating a thinning of the freshwater lens. Results also indicate that the increased withdrawals produce some groundwater with chloride concentration below 250 milligrams per liter and some groundwater with higher chloride concentration. The amount of drawdown near production wells and the quality of water withdrawn from production wells is dependent on the rate and spatial distribution of the withdrawals. The model was also used to evaluate how groundwater availability may be affected for a drier recharge scenario based on a published study of future climate. Model results of the future recharge scenario indicate that the rate of groundwater recharge is a controlling factor for (1) water levels, (2) the 50-percent ocean-water salinity surface, and (3) the quality of water withdrawn from production wells in the Wailuku area. Coupled with reduced groundwater recharge (with all other factors remaining equal), the modeled future withdrawals in the scenario would tend to cause lower water levels, a higher 50-percent ocean-water salinity surface, and increased salinity of water withdrawn from production wells. The three-dimensional numerical groundwater model developed for this study utilizes the latest available hydrologic and geologic information and is a useful tool for understanding the long-term hydrologic effects of additional groundwater withdrawals in central Maui. The model has several limitations, including its non-uniqueness and inability to account for local-scale heterogeneities. Short-term effects of changes in recharge and withdrawals—and optimization of pumping rates to meet increased demand for water with acceptable salinity—are possible conditions for future simulation analyses.

Hawaii↗

Strategic Plan for the North American Breeding Bird Survey: 2006-2010

Executive Summary The mission of the North American Breeding Bird Survey (BBS) is to provide scientifically credible measures of the status and trends of North American bird populations at continental and regional scales to inform biologically sound conservation and management actions. Determining population trends, relative abundance, and distributions of North American avifauna is critical for identifying conservation priorities, determining appropriate conservation actions, and evaluating those actions. The BBS program, jointly coordinated by the U.S. Geological Survey and Environment Canada’s Canadian Wildlife Service, provides the U.S. and Canadian Federal governments, state and provincial agencies, other conservation practitioners, and the general public with science-based avian population trend estimates and other information for regional and national species’ population assessments. Despite the demonstrated value of the BBS for furthering avian conservation across North America, its importance is often underappreciated, and it is underfunded compared with many other government-supported programs that report on status of the environment. Today, BBS resources, adjusted for inflation, are below the amount allocated in the 1970s and are still only sufficient to support two biologists. Yet the number of routes, participants, data, and data requests has quadrupled. Data and information management and delivery requirements and security concerns, non-existent in 1966, impose further demands on BBS resources. In addition, the Mexican expansion of the BBS offers new hope for a truly continental approach to avian conservation, but also brings additional challenges. Meeting the goals of this plan will take cooperation among myriad stakeholders; yet, even with collaboration, most objectives of this plan will be unattainable if BBS program support is not increased. The BBS developed this strategic plan to help set priorities and identify resources required for the program to continue to meet the evolving needs of the conservation community for information on bird population change. By setting clear goals, strategies, and measures of success, this plan provides a cohesive framework and vision for maintenance and development of the BBS. The plan identifies two major goals for the BBS, with a number of strategies and objectives to achieve these goals. Over the next 5 years, progress made in addressing each long-term goal and its associated 5-year strategies and objectives will gage the plan’s success. Specific actions, projected outcomes, and measures of success related to accomplishing these are outlined in Table 1, with a timeline in Table 2. The two main goals for the program, with a summary of the strategies to achieve them, are: Goal 1: Collect scientifically credible measures of the status and trends of North American bird populations at continental and regional scales. The North American Breeding Bird Survey will continue to support North American natural resource conservation through the collection of scientifically credible measures of the status and trends of continental bird populations. While doing this, the BBS will work to improve the science behind the program to better meet its mission and the changing needs of the avian conservation community. In partnership with collaborators, the BBS will address detection probability bias and habitat bias, improve analytical methods, and more fully assess and account for observer quality. Moreover, the BBS will improve the quality and breadth of avian population data through strategic increases in route density and the establishment of a Mexican BBS program. Goal 2: Ensure BBS data and analytical results are widely available and easily accessible for use by the avian conservation and management communities. At the heart of the BBS lies a four-million-record database containing more than 40 years of data on more than 600 bird species. These data are of no value if not well maintained, appropriately analyzed, and widely and easily accessible. The USGS has greatly improved data management and accessibility in recent years. Trend estimates were first made available via the Internet in the mid-1990s, followed closely by the raw data with baseline metadata and standard operating procedures. Nevertheless, numerous enhancements to data management and the usability of BBS results will greatly improve the ability of the BBS to serve avian conservation goals. The BBS needs to ensure that BBS data and results presented on the web site use the best data-management practices and statistical methods, with adequate documentation for users to understand them and any differences between different trend estimates. Moreover, the BBS needs to increase communication with BBS partners and stakeholders to ensure that it continues to meet the avian population status and trends needs of the conservation community and to encourage the development of new products. Working with collaborators, the BBS will develop tools for integrating environmental parameters like habitat change into the analyses, and for integrating BBS data with other avian survey results. In addition, the BBS will continue to improve data and database management through the incorporation of additional data and data fields, such as georeferenced stop locations and more complete metadata for the raw data and results, thus enhancing the uses that can be made of the data.

Circular↗

Hydrologic effects of potential changes in climate, water use, and land cover in the Upper Scioto River Basin, Ohio

This report presents the results of a study to provide information on the hydrologic effects of potential 21st-century changes in climate, water use, and land cover in the Upper Scioto River Basin, Ohio (from Circleville, Ohio, to the headwaters). A precipitation-runoff model, calibrated on the basis of historical climate and streamflow data, was used to simulate the effects of climate change on streamflows and reservoir water levels at several locations in the basin. Two levels of simulations were done. The first level of simulation (level 1) accounted only for anticipated 21st-century changes in climate and operations of three City of Columbus upground reservoirs located in northwest Delaware County, Ohio. The second level of simulation (level 2) accounted for development-driven changes in land cover and water use in addition to changes in climate and reservoir operations. A statistical change-factor approach was used to construct future climate time series that were used in the precipitation-runoff model to compute time series of future streamflows and reservoir water levels. Monthly change factors were computed by determining differences or fractional changes between baseline historical climate time series and future climate time series consisting of outputs from selected global climate models that were included in the World Climate Research Programme’s Coupled Model Intercomparison Project phase 3 (CMIP3). Eight sets of change factors were determined on the basis of outputs from four global climate models, each of which was run under two greenhouse-gas scenarios (the “A1b” and “A2” scenarios from the Intergovernmental Panel on Climate Change’s 4th assessment). The 4 global climate models whose data were used in this study were selected to represent a wide range of potential climate outcomes as compared to the entire range of potential climate outcomes associated with the 16 global climate models represented in the CMIP3 multimodel dataset. Future land-cover and water-use data were estimated for use in the level-2 precipitation-runoff simulations to account for development-driven changes in land cover and water use. Future land-cover characteristics were estimated for selected future years based on population projections and zoning plans for communities in the basin. Future water-use data for major water suppliers and wastewater-treatment facilities were estimated from current per capita water use, population projections for 2035, and population projections for 2090 assuming full build-out. A statistical change-factor-based approach was used to estimate future water-use characteristics by major water suppliers and wastewater-treatment facilities on the basis of reference-period historical water uses. Annual change factors that were determined for future years other than 2035 and 2090 (when the change factors could be explicitly computed) were estimated by interpolating or extrapolating linearly in time. Water uses by entities other than major water suppliers and wastewater-treatment facilities were assumed to remain unchanged because of uncertainty about if and (or) how they might change. Results from the level-1 simulations were analyzed primarily to facilitate evaluation of climate-driven temporal changes in annual, seasonal, and monthly streamflow and water-level characteristics, as well as in maximum and minimum 7-, 30-, and 180-day average streamflow and reservoir water levels. Results from the level-2 simulations were analyzed to help evaluate and contrast (relative to level-1 results) the effects of the added development-related factors on maximums and minimum 7-, 30-, and 180-day average streamflows and reservoir water levels and duration characteristics of 7- and 30-day average streamflows and reservoir water levels. Results for 12 stream locations and 5 reservoirs in the Upper Scioto River Basin are presented primarily as a series of plots. Although it is beyond the scope of this study to address results in detail for each model-output location, selected results are discussed to illustrate potential uses and interpretations of the graph products provided in this report. In addition, general trends and patterns in streamflow and water-level characteristics are identified where possible.

Ohio↗

Analysis of nutrients in the surface waters of the Georgia–Florida Coastal Plain study unit, 1970–91

During the early phase of the Georgia-Florida National Water Quality Assessment study, existing information on nutrients was compiled and analyzed in order to evaluate the nutrient concentrations within the 61,545 square mile study unit. Evaluation of the nutrient concentrations collected at surface-water sites between October 1, 1970, and September 30, 1991, utilized the environmental characteristics of land resource provinces, land use, and nonpoint and point-source discharges within the study unit. Long-term trends were investigated to determine the temporal distribution of nutrient concentrations. In order to determine a level of concern for nutrient concentrations, the U.S. Environmental Protection Agency (USEPA) guidelines were used: (1) for nitrate concentrations, the maximum contaminant level in public-drinking water supplies (10 mg/L); (2) for ammonia concentrations, the chronic exposure of aquatic organisms to un-ionized ammonia (2.1 mg/L); (3) for total-phosphorus concentrations, the recommended concentration in flowing water to discourage excessive growth of aquatic plants (0.1 mg/L); and (4) for kjeldahl concentrations, however, no guidelines were available. For sites within the 10 major river basins, median nutrient concentrations were enerally below USEPA guidelines, except for total-phosphorus concentrations where 45 percent of the medians exceeded the guideline. The only median ammonia concentration that exceeded the guideline occurred at the Swift Creek site (3.4 mg/L), in the Suwannee River basin, perhaps due to wastewater discharges. For all sites within the Withlacoochee, Aucilla, and St. Marys River basins, median concentrations of nitrate, ammonia, and total phosphorus were below the USEPA guidelines. Nutrient data at each monitoring site within each major basin were aggregated for comparisons of median nutrient concentrations among major basins. The Ochlockonee and Hillsborough River basins had the highest median nutrient concentrations, the Aucilla River basin had the lowest. Median concentrations of nitrate and ammonia among all major basins were below USEPA guidelines. The median total-phosphorus concentrations for the following river basins exceeded the USEPA guideline: Hillsborough, St. Johns, Suwannee, Ochlockonee, Satilla, Altamaha, and Ogeechee. Although nutrient concentrations within the study unit were low, long-term increasing trends were found in all four nutrients. All 18 study-unit wide nitrate trends had increasing slopes ranging from less than 0.01 to 0.07 (mg/L)/yr. The range in slope for the 13 ammonia trends was -0.03 to 0.01 (mg/L)/yr with 6 increasing trends in the northern part of the study unit. Of the 17 total-phosphorus trends found in the study unit, 10 were found at sites where the median concentration exceeded the USEPA guideline. At these 10 sites, 4 sites had increasing trends with slopes ranging from less than 0.01 to 0.07 (mg/L)/yr, 5 sites had decreasing trends with slopes ranging from -0.01 to -0.24 (mg/L)/yr, and one site showed a seasonal concentration trend. Median nutrient concentrations were significantly different among the four land resource provinces: Southern Piedmont, Southern Coastal Plain, Coastal Flatwoods, and Central Florida Ridge. As a result, nutrient concentrations among basins with similar nutrient inputs but located within different land resource provinces are not expected to be the same due to differences in the combination of factors such as soil permeability, runoff rates, and stream channel slopes. This concept is an important consideration in designing a surface-water quality network within the study area. For the most part, the Coastal Flatwoods showed the lowest median nutrient concentrations and the Southern Coastal Plain had the highest median nutrient concentrations. Lower median nitrate concentrations in surface-water basins were associated with the forest/wetland land-use category and higher median concentrations of nitrate and ammonia with the urban category when land-use percentages were classified into four land-use categories (agriculture, forest/wetland, mixed, and urban). These results were reasonable based on expected high nutrient inputs from urban areas and low inputs from forested and wetland areas. However, the lack of association between high nutrient concentrations and the agricultural land-use category was not expected since high nutrient inputs are generally needed for agriculture production.

Florida, Georgia↗

Hydrogeology and potential effects of changes in water use, Carson Desert agricultural area, Churchill County, Nevada

Operating Criteria and Procedures established in 1988 for delivery of water for irrigation in the Newlands Project area include regulations and methods to increase Project efficiency. Public Law 101-618 of 1990 includes a target of 75-percent Project efficiency and a program of water-rights acquisition for wetlands maintenance. The directives could result in large reductions in water used for irrigation in the Carson Desert, potentially affecting ground-water supplies. Previous studies of the area have been evaluated to determine the current understanding of how aquifers are recharged, what controls the flow and quality of ground water, potential effects of changes in water use, and what additional information would be needed to quantify further changes in water use. Inflow of surface water to the basin from Lahontan Reservoir averaged about 370,000 acre-ft/yr (acre-feet per year) from 1975 to 1992, supplying water for irrigation of more than 50,000 acres. More than half of the water released from the reservoir is lost to seepage, operational spills, and evaporation before delivery of about 170,000 acre-ft/yr to farm headgates. The volume of water delivered to farms that does not contribute to crop consumptive use (on-farm loss) is poorly known but could be as much as 60,000 acre-ft/yr. Consumptive use on irrigated land may be about 180,000 acre-ft/yr, of which 50,000 acre-ft/yr may be derived from the shallow aquifer. Outflow from irrigated land is a mixture of operational spill, runoff from irrigated fields, and ground-water seepage to drains. Total outflow averages about 170,000 to 190,000 acre-ft/yr. This water flows to wetlands at Carson Lake, Stillwater Wildlife Management Area, and Carson Sink. Three sedimentary aquifers were previously defined in the basin: a shallow aquifer having highly variable lithology and water quality, an intermediate aquifer containing principally fresh water, and a deep aquifer having water of poor quality. The deep aquifer could possibly be divided into sedimentary and volcanic zones. In addition, a near-surface zone may exist near the top of the shallow aquifer where vertical flow is inhibited by underlying clay beds. A basalt aquifer near the center of the basin is the source of public supply and is recharged by the shallow, intermediate, and deep aquifers. Water levels in the basalt aquifer have declined about 10 feet from pre-pumping levels, and chloride and arsenic concentrations in the water have increased. The average depth to ground water has decreased beneath large areas of the Carson Desert since 1904 as a result of recharge of surface water used for irrigation. Ground water generally flows from west to east, and dissolvedsolids concentrations increase greatly near areas of ground-water discharge, where State of Nevada drinking-water standards commonly are exceeded. Uncertainties in the rates of recharge to and discharge from the basin cause an imbalance in the calculated water budget. Estimates for total recharge range from 400,000 to 420,000 acreft/yr, whereas estimates for discharge range from 630,000 to 680,000 acre-ft/yr. Estimates of inflow to and outflow from aquifers of the study area are as follows: shallow aquifer, more than 120,000 acre-ft/yr; intermediate aquifer, possibly more than 25,000 acre-ft/yr; deep aquifer, unknown; and basalt aquifer, about 4,000 acre-ft/yr. Estimates for flow volumes to and from the shallow and intermediate aquifers are based on assumed aquifer properties and could be in error by an order of magnitude or more. Conceptual models of the basin show that ground-water flow is downward from the shallow aquifer to the intermediate aquifer in the western part and near the center of the basin, and is upward in the eastern part of the basin. Little is known about flow in the deep aquifer. Nearsurface clay beds inhibit vertical flow near the center and eastern part of the basin except where breached by relict sand-filled channels of the Carson River. Conceptual models of the basin show that changes in water use in the western part of the basin probably would affect recharge to the sedimentary and basalt aquifers. Near the center of the basin, water-use changes could affect the shallow and basalt aquifers but might have less effect on the intermediate aquifer. In the eastern part of the basin, changes could affect the shallow aquifer, but would probably not affect the intermediate or basalt aquifers. If seepage is decreased by lining canals, and land is removed from production, water-level declines in the shallow aquifer could be greater than 10 feet as far as 2 miles from the lined canals. Depending upon the distribution of specific yield, decreasing recharge by 25,000 to 50,000 acre-ft/yr beneath 30,000 acres could cause water levels to decline from 4 to 17 feet. Where ground water supplements crop consumptive use, water levels could temporarily rise when land is removed from production. Where water is pumped from a near-surface zone of the shallow aquifer, water-level declines might not greatly affect pumped wells where the nearsurface zone is thickest, but could cause wells to go dry where the zone is thin. The understanding of surface-water and ground-water relations, recharge and discharge of ground water, ground-water movement, and the potential effects of changes in water use in the Carson Desert can be refined by studying (1) the extent of potable water in the intermediate and basalt aquifers, (2) lithology and specific yield of aquifer materials, (3) data on ground-water levels and quality, and (4) data on surface-water flow and quality, as well as monitoring the effects of changes in water use as they take place.

Nevada↗

Part 3: Volcano investigations on Umnak Island, 1946

Umnak Island is a dumbbell-shaped island in the eastern part of the Aleutian Islands. The island is 70 miles long and trends northeast-southwest. During 1946 volcano investigations were begun on the island and geologic mapping of most of northeastern Umnak Island was completed. Okmok Volcano, a large, broad volcanic mountain rising to altitudes of 3,000 to 3,500 feet, occupies the central portion of northeastern Umnak Island. Fort Glenn, and Army airbase, is situated on the eastern end of the island, approximately 9 miles east of Okmok Volcano. The central part of Okmok Volcano is indented by Okmok caldera, a large cliff-rimmed volcanic depression, 7%, miles in maximum diameter. The floor of the caldera is 1,500 to 2,500 feet below the caldera rim. Nine large cinder cones and many small ones lie on the caldera floor, chiefly along two arcuate zones. The caldera is drained by Crater Creek, which flows through a deep gorge cut in the northeastern wall of the caldera, and into Bering Sea. Mount Tulik (4,111 feet altitude) and Mount Idak (1,918 feet altitude) arc important centers of ancient volcanism on the flanks of Okmok Volcano. The geologic history of Okmok Volcano falls into three stages: The first includes the upbuilding of an ancient cone—Mount Okmok—to an altitude of at least 6;500 feet on the site of the present caldera; the second encompasses the destruction in a castastrophic eruption of the summit cone and the formation of the caldera; the third comprises events since the great eruption. The earliest activity at Mount Okmok probably dates hack to the late Tertiary period. A composite cone, concave-sided in profile, was built by the alternate eruption of ash, coarse pyroclastics, and basalt flows. During the late Pleistocene, volcanic activity at Mount Okmok was greatly reduced and a topography of late youth was carved on the lower slopes by streams and valley glaciers. The summit of Mount Okmok was upwarped and dikes and necks were injected into the resulting fractures. A large volcano at the site of Mount Idak was active during part of the period of upbuilding at Mount Okmok but became extinct during the middle Pleistocene. A parasitic vent, Mount Tulik, became active during the late Pleistocene and built a steep-sided cone before it became extinct, shortly before the formation of Okmok caldera. A cataclysmic eruption terminated the period of dissection at Mount Okmok, 10,000 or more years ago. Part of the summit was blown away by the explosive violence of this eruption. Nuees ardentes (glowing clouds) and mudflows deposited tuff-breccia and agglomerate in the glacial valleys; later phases of the eruption blanketed the landscape with ash. Near the end of the eruption, the remaining upper part of the volcano collapsed along arcuate fractures: large blocks subsided several thousand feet and are now concealed in the caldera Poor beneath later deposits. A large arcuate fault block which subsided less than other blocks stands above the floor in the northeastern part of the caldera. After the eruption, water collected in the caldera, forming a lake. Small but frequently active cones built islands in the lake and covered its bottom with pyroclastic debris. The lake eventually overflowed the lowest point in the rim of the caldera, and Crater Creek Gorge was carved, draining the lake and dissecting its deposits. Renewed movement along faults at the head of Crater Creek Gorge later raised a harrier which temporarily dammed the drainage and formed a second caldera lake. Readjustments among subsided blocks in the caldera floor resulted in the folding of postcaldera deposits at several localities. Much of the caldera floor has been covered by lava flows extruded from several cones since the draining of the first caldera lake. In general, however, volcanic activity seems to have declined since the great caldera-forming eruption. Seven eruptions from cones on the caldera floor have been recorded since 1817; the latest occurred in 1945. As part of the geochemical program for the study of Okmok Volcano, temperatures of fumaroles were measured and samples of the products of the volcanic activity were analyzed. Average temperatures of fumaroles at one source of the 1945 lava low dropped from 320° C. on July 19 to 90° C. on September 5. The temperatures of fumaroles associated with the crater vents on both Cones A and C ranged from 95° C. to 97" C., which is slightly below the condensation point of steam, indicating the presence of minor quantities of gases other than steam. The magmatic gases of fumaroles on Cone A consisted of carbon dioxide and sulfur dioxide in about equal amounts. The lack of halogen acid gases in the fumaroles and the steadily dropping temperatures arc interpreted as indicating that the present quiescence of Cone A will continue for many months. Solid reaction products from areas of fumarolic activity on Cone A are sulfates of sodium, calcium, and iron. The presence of hydrogen sulfide as the dominant sulfur gas at Cone C is interpreted as indicating the dying stages of the present cycle of activity of Cone C. Thermal springs along the north base of Cone D have a total discharge of 115 cubic feet per second. Their average temperature is approximately 7° C. above the annual mean. From these figures it is calculated that about 21,000 kilogram calories per second are being given off by Cone D. The spring waters contain minute quantities of boron which is indicative of a magmatic source for a small part of the water. Hence, Cone D though quiescent is not extinct. Evidence is presented to show that most of the spring water from Cone D is meteoric in origin. Thermal waters in the southwestern part of Umnak Island at Hot Springs Cove and south of Geyser Bight contain lithium, boron, arsenic, and antimony in solution. These elements are regarded as derived from underlying magmas that are in an advanced state of crystallization and hence not likely to give rise in the near future to large-scale volcanic activity. Three portable seismographs were placed on the flanks of Okmok Volcano and were in operation during most of the period from June 1 to October 1. During this period several slight tremors and one moderate tremor, all of distant origin, were registered, but no tremors attributable to Okmok Volcano were recorded. The lack of tremor records, however, may have been due more to the insensitivity of the instruments than to the absence of tremors. Earth-current investigations were carried on during August and September by comparison of records obtained from a base station at Fort Glenn with those from a station 1 V2 miles southwest of Mount Tulik. The records obtained indicate that no difference in magnitude or direction of earth currents existed between the Fort Glenn and Mount Tulik areas. The similarity of record obtained is indicative of the absence of a disturbing factor such as a large body of live magma beneath Okmok Volcano. Future eruptions of Okmok Volcano are expected to he of mild to moderate intensity, and will he chiefly in the form of ash falls from vents inside the caldera. There would be a great menace—in the form of lava flows, nuees ardentes, and mudflows—to installations at Fort Glenn if a new center of volcanism came into existence on the east slope of Okmok Volcano. Small postcaldera cones now exposed there indicate that extra-caldera eruptions have occurred in the recent past and can be expected in the future. The possibility of another catastrophic eruption of the caldera-forming type, however, is remote. Okmok Volcano should be kept under close observation, partly because of its possible threat to Fort Glenn and partly because it is a readily accessible locale for accumulating information on details of volcanic processes, applicable to other volcanoes in the Aleutian arc and elsewhere.

Alaska↗

Physics to fish—Understanding the factors that create and sustain native fish habitat in the San Francisco Estuary

Executive Summary The Bureau of Reclamation (Reclamation) operates the Central Valley Project (CVP), one of the nation’s largest water projects. Reclamation has an ongoing need to improve the scientific basis for adaptive management of the CVP and, by extension, joint operations with California’s State Water Project. The U.S. Geological Survey (USGS) works cooperatively with the Bureau of Reclamation to provide scientific support for the management of Reclamation’s CVP project. Major habitat restoration efforts and a new water-diversion point are planned to benefit delta smelt ( Hypomesus transpacificus ) and other species of concern while ensuring the reliability of water supply. In addition, various flow actions and management activities have been identified as possible methods to increase populations of delta smelt and salmonid ( Oncorhynchus spp.) runs of concern. The overarching goal of this cooperative project was to provide Reclamation with the scientific information needed to evaluate the efficacy of ongoing and future adaptive management actions and to improve the scientific basis for more flexible CVP operations that would achieve water-supply reliability and fish protection. The research and monitoring described in this report comprises the period 2015–19 and focuses on management issues related to native fish species of concern, especially delta smelt. Conserving the delta smelt population while providing a reliable water supply is a primary management and policy issue in California. Our approach for this cooperative project is based on the “physics to fish” concept, the idea that high-quality habitat is generated and sustained by the interaction between physical processes and the landscape. These interactions create a template for chemical and biological processes that can change across a variety of spatial and temporal scales. Following this concept, this project (hereafter referred to as “the physics to fish project”) included monitoring and studies of water flows, sediments, water quality, and invertebrate and fish dynamics across a range of spatial and temporal scales and in regions relevant to resource managers tasked with managing water supplies and ecosystem health in the San Francisco Estuary. The intent of this approach was to document the habitat conditions, important processes, and interactions among them that create high-quality habitat for native fishes so that the likely effects of future management actions (for example, habitat restoration) can be objectively assessed at the local (site-specific), regional (within subregions of the estuary), and landscape (across the entire estuary and beyond) scales. Hydrodynamically, the upper estuary (landward of Carquinez Strait) is characterized by a fixed volume of tidally exchanged water (for example, tidal prism) that interacts with the existing channel network and bathymetry to create regions with differing hydrodynamics. Our results indicate that careful study of construction or reoperation of existing infrastructure to perform management actions can help (1) improve the accuracy of hydrodynamic models; (2) further understanding of ecological effects; and (3) enhance abilities to predict ecological outcomes. At the local scale, we developed a new concept called the Lagrangian to Eulerian (LE) ratio that can be used as a tool for understanding the importance of various hydrodynamic processes in specific channels or channel networks and for forecasting transport dynamics. Channels with LE ratios<1 in a channel network or in a dead-end slough are hydrodynamically able to develop an exchange zone between two parcels of water that may have different chemical and physical properties. In a dead-end channel, there is a landward region with long residence time (no-exchange zone) and a seaward region with short residence time (high-exchange zone) that are well mixed with seaward waters. At the transition (exchange zone) between the high and no-exchange regions, a gradient will form in water-quality constituents that differ in concentration between the landward and seaward waters. Turbidity affects fish habitat and has declined through time in the San Francisco Estuary. Average turbidity across the Sacramento–San Joaquin Delta (hereafter referred to as “the Delta”) is dependent on annual hydrology. In dry years, the region around Cache Slough (known regionally as the “Cache Slough Complex”) in the northern Delta is generally more turbid than Suisun Bay and the lower Sacramento River. When the Yolo By-Pass (known regionally as “Yolo Bypass”), a large flood bypass that runs parallel to the Sacramento River in the northern Delta, is not flooding and river flows are lower, sediment is usually transported into the Cache Slough Complex because flood tides dominate ebb tides, resulting in transport of suspended sediment from seaward areas of the upper estuary into the Cache Slough Complex. These hydrodynamic conditions also favor the formation of turbidity maximums (TMs) in the Cache Slough Complex. The TMs are areas of higher suspended-sediment concentration, providing higher-turbidity habitat favored by some fishes, including delta smelt, and they can also concentrate other constituents, including phytoplankton and organic carbon that can be important in food webs. Pelagic primary production by phytoplankton is the basis for Delta food webs supporting pelagic fishes such as delta smelt; however, phytoplankton abundance in the Delta has declined during recent decades. We examined how nutrients, hydrodynamics, and other factors affect phytoplankton blooms. Based on our results, we developed three new concepts of phytoplankton bloom formation in the Delta, each associated with a distinct set of hydrologic conditions. First, productivity cascades highlighted how local processes can contribute to phytoplankton blooms observed at the regional scale. Second, we observed phytoplankton blooms in the upper San Francisco Estuary that were associated with transport out of Yolo By-Pass (transport blooms). Third, we also documented a series of phytoplankton blooms that were in the confluence area at the landward edge of Suisun Bay. The conditions leading to creation of confluence phytoplankton blooms are not yet understood, but the confluence region connects the Cache Slough Complex with Suisun Marsh. Therefore, blooms in this area have the potential to spread to large areas of the Delta. At the landscape scale, the distribution of the invasive clams ( Potamocorbula amurensis and Corbicula fluminea , hereafter referred to as “ Corbicula ”) is driven by salinity. At smaller spatial scales, the distribution of either species is sensitive to multiple factors affecting survival and reproduction, complicating efforts to predict distribution and abundance without considering local-scale conditions across the area of interest. In the Cache Slough Complex, the area landward of the exchange zone in regions with LE ratio<1 were characterized by low abundances of Corbicula probably because recruits from seaward areas are not transported past the exchange zone and because there are no landward tributaries with adult Corbicula to provide an upstream source of recruits. Corbicula biomass was highest near or downstream from the exchange zone consistent with Corbicula grazing on phytoplankton produced in the exchange zone or transported from the no-exchange zone. The severity of Corbicula grazing could be reduced by manipulating the hydrodynamic characteristics of waterways; however, the beneficial and harmful effects on the organisms meant to benefit from increased phytoplankton production, including zooplankton and fish species of concern, should be thoroughly examined before manipulating hydrodynamic characteristics. The distribution of fishes at the landscape scale is generally driven by the position of the salinity field in the estuary. The physics to fish project compared distributions of fishes at Ryer Island, a tidal wetland in Suisun Bay and a region of variable salinity, with fish distributions at the Cache Slough Complex, a freshwater region. At Ryer Island, there was an absence of freshwater invasive species and an abundance of native species, such as Sacramento splittail ( Pogonichthys macrolepidotus ), tule perch ( Hysterocarpus traskii ), and Sacramento pikeminnow ( Ptychocheilus grandis ). The native species were almost exclusively captured in wetland and nearshore shallow-water habitat regardless of water-quality conditions. In the Cache Slough Complex, our regional scale objective was to elucidate how hydrodynamic-physical habitat interactions drive fish-community structure. Our studies showed that dendritic channel systems were better able to support native species, while intertidal habitats supported those species best able to exploit the transient character of the habitat. Habitats upstream from the exchange zone were especially important in supporting high numbers of native fishes relative to within or downstream from the exchange zone. Many of the native species were associated with tidal marsh in the no-exchange zone. More pelagic-oriented, mobile species, such as Striped Bass ( Morone saxatilis ), threadfin shad ( Dorosoma petenense ), and Sacramento pikeminnow, were more affected by water-quality conditions, such as turbidity. The physics to fish concept developed in this project provides a framework for designing individual projects and for considering the cumulative effects of multiple projects in a region, using the LE ratio as a guiding metric. The physics to fish concept may also provide a suitable framework for coordinating management actions. Tidal wetlands can function in several ways in the hydrodynamic framework. Relatively small tidal wetlands with short channel networks and with LE ratios>1 are not able to maintain a landward no-exchange zone or an exchange zone. This likely means that any contributions to pelagic food webs would be limited to resources derived from wetland vegetation, which can include dissolved and particulate organic matter (detritus) and populations of consumers that can increase in abundance based on those resources. The fate of the contributed production from these channels depends on the characteristics of the receiving waters seaward of the tidal wetland. If these channels join a large system such as Suisun Bay, then any contribution is likely to be rapidly dispersed in the larger volume; however, the channel junction might provide a focal point for consumers, such as fishes, to congregate and feed on material leaving the wetland on ebb tides before it is dispersed in the larger volume. Fishes might also access these resources by entering the wetland. The physics to fish project has established a foundation and several new concepts for understanding how habitat restoration can benefit native fish populations at the local and regional levels. Many of the ideas regarding habitat restoration and channel modifications outlined in this report could help guide management actions that could improve conditions for native fishes at little or no water cost beyond water already dedicated to other management actions. A complete list of products originating from this work is provided in appendix 1.

California↗

Graphic and algebraic solutions of the discordant lead-uranium age problem

Uranium-bearing minerals that give lead-uranium and lead—lead ages that are essentially in agreement, i.e. concordant, generally are considered to have had a relatively simple geologic history and to have been unaltered since their deposition. The concordant ages obtained on such materials are, therefore, assumed to approach closely the actual age of the minerals. Many uranium-bearing samples, particularly uranium ores, give the following discordant age sequences; Pb 206 U 238 &lt; Pb 207 U 235 &#x2AA1; Pb 207 Pb 206 "> Pb 206 U 238 <Pb 207 U 235 ⪡Pb 207 Pb 206 or, less frequently, Pb 207 Pb 206 &#x2AA1; Pb 207 U 235 &lt; Pb 206 U 238 "> Pb 207 Pb 206 ⪡Pb 207 U 235 <Pb 206 U 238 . These discordant age sequences have been attributed most often to uncertainties in the common lead correction, selective loss of radio-active daughter products, loss or gain of lead or uranium, or contamination by an older generation of radiogenic lead. The evaluation of discordant lead isotope age data may be separated into two operations. The first operation, with which this paper is concerned, is mechanical in nature and involves the calculation of the different possible concordant ages corresponding to the various processes assumed to have produced the discordant ages. The second operation is more difficult to define and requires, in part, some personal judgement. It includes a synthesis of the possible concordant age solutions with other independent geologic and isotopic evidence. The concordant age ultimately chosen as most acceptable should be consistent not only with the known events in the geologic history of the area, the age relations of the enclosing rocks, and the mineralogic and paragenetic evidence, but also with other independent age measurements and the isotopic data obtained on the lead in related or associated non-radioactive minerals. The calculation of the possible concordant ages from discordant age data has been greatly simplified by Wetherill's graphical method of plotting the mole ratios of radiogenic Pb 206 U 238 "> Pb 206 U 238 ( N 206 N 238 "> N 206 N 238 ) vs. radiogenic Pb 207 U 235 "> Pb 207 U 235 ( N 207 N 235 "> N 207 N 235 ) after correcting for the contaminating common Pb 206 and Pb 207 . The linear relationships noted in this graphical procedure have been extended to plots of the mole ratios of total Pb 206 U 238 "> Pb 206 U 238 ( t N 206 N 238 "> t N 206 N 238 ) vs. total Pb 207 U 235 "> Pb 207 U 235 ( t N 207 N 235 "> t N 207 N 235 ). This modification permits the calculation of concordant ages for unaltered samples using only the Pb 207 Pb 206 "> Pb 207 Pb 206 ratio of the contaminating common lead. If isotopic data are available for two samples of the same age, x and y , from the same or related deposits or outcrops, graphs of the normalized difference ratios [ ( N 206 N 204 )x &#x2212; ( N 206 N 204 )y ( N 238 N 204 )x &#x2212;( N 238 N 204 )y ] vs. [ ( N 207 N 204 )x &#x2212; ( N 207 N 204 )y ( N 235 N 204 )x &#x2212;( N 235 N 204 )y ] "> [(N 206 N 204 )x − (N 206 N 204 )y(N 238 N 204 )x −(N 238 N 204 )y] vs. [(N 207 N 204 )x − (N 207 N 204 )y(N 235 N 204 )x −(N 235 N 204 )y] can give concordant ages corrected for unknown amounts of a common lead with an unknown Pb 207 / Pb 206 ratio. (If thorium is absent the difference ratios may be normalized with the more abundant index isotope, Pb 208 .) Similar plots of tho normalized, difference ratios for three genetically related samples ( x − y ) and( x − z ), will give concordant ages corrected, in addition, for either one unknown period of past alteration or initial contamination by an older generation of radiogenic lead of unknown Pb 207 /Pb 206 ratio. Practical numerical solutions for many of tho concordant age calculations are not currently available. However, the algebraic equivalents of these new graphical methods give equations which may be programmed for computing machines. For geologically probable parameters the equations of higher order have two positive real roots that rapidly converge on the exact concordant ages corrected for original radiogenic lead and for loss or gain of lead or uranium. Modifications of these general age equations expanded only to the second degree have been derived for use with desk calculators. These graphical and algebraic methods clearly suggest both the type and minimum number of samples necessary for adequate mathematical analysis of discordant lead isotope age data. This mathematical treatment also makes it clear that discordant lead isotope data alone cannot provide the basis for the choice of one of the possible concordant age solutions. The new equations, in particular, provide an incentive to improve our physical constants, analytical techniques and sampling methods in order that we may derive all of the useful geologic information that is available in a comprehensive lead isotope age study.

Geochimica et Cosmochimica Acta↗

Geology and mineral deposits of the Carlile quadrangle, Crook County, Wyoming

The Carlile quadrangle-is along the northwestern flank of the Black Hills uplift in Crook County, Wyo. The area-is primarily one of canyons and divides that are a result of downcutting by the Belle Fourche River and its tributaries through an alternating succession of sandstone, siltstone, and mudstone or shale beds. The present topography is also influenced by the regional structure, as reflected by the beds that dip gently westward and by the local structural features such as anticlines, domes, synclines, basins, and terraces, which are superimposed upon the regional setting. Rocks exposed include shale and thin limestone and sandstone beds belonging to the Redwater shale member of the Sundance formation and to the Morrison formation, both of Late Jurassic age; sandstone, siltstone, and mudstone of the Lakota and Fall River formations of Early Cretaceous age; and shale and sandstone of the Skull Creek shale, Newcastle sandstone, and Mowry shale, also of Early Cretaceous age. In the southwestern part of the quadrangle rocks of the Upper Cretaceous series are exposed. These include the Belle Fourche shale, Greenhorn formation, and Carlile shale. Gravel terraces, landslide debris, and stream alluvium comprise the surficial deposits. The Lakota and Fall River formations, which make up the Iriyan Kara group, contain uranium deposits locally in the northern Black Hills. These formations were informally subdivided in order to show clearly the vertical and lateral distribution of the sandstone, siltstone, and mudstone facies within them. The Lakota was subdivided into a sandstone unit and an overlying mudstone unit; the Fall River was subdivided, in ascending order, into a siltstone unit, a mudstone unit, a sandstone unit, and an upper unit. The lithologic character of the Lakota changes abruptly locally, and the units are quite inconsistent with respect to composition, thickness, and extent. This is in contrast to a notable consistency in the lithologic character and thickness among all the Fall River units, with the exception of the upper unit. Petrographic studies on selected samples of units from both formations show differences in composition between Lakota and Fall River rocks. The Carlile quadrangle lies immediately east of the monocline that marks the outer limit of the Black Hills uplift, and the rocks in this area have a regional dip of less than 2° outward from the center of the uplift. Superimposed upon the regional uplift are many subordinate structural features anticlines, synclines, domes, basins, and terraces which locally modify the regional features. The most pronounced of these subordinate structural features are the doubly-plunging Pine Ridge, Oil Butte, and Dakota Divide anticlines, and the Eggie Creek syncline. Stress throughout the area was relieved almost entirely through folding; only a few small nearly vertical normal faults were found within the quadrangle. Uranium has been mined from the Carlile deposit, owned by the Homestake Mining Co. The ore minerals, carnotite and tyuyamnuite occur in a sandstone lens that is enclosed within relatively impermeable clayey beds in the mudstone unit of the Lakota formation. The ore also includes unidentified black vanadium minerals and possibly coffinite. Uranium minerals are more abundant in and adjacent to thicker carbonaceous and silty seams in the sandstone lens. A mixture of fine-grained calcium carbonate and calcium sulfate fills the interstices between detrital quartz grains in mineralized sandstone. Selenium and arsenic are more abundant in samples that are high in uranium. Drilling on Thorn Divide about 1 mile west of the Carlile mine has roughly outlined concentrations of a sooty black uranium mineral associated with pyrite In two stratigraphic intervals of the Lakota formation. One is in the same sandstone lens that contains the ore at the Carlile mine; the other is in conglomeratic sandstone near the base of the Lakota. These deposits are relatively deep, and no mining has been attempted. The mineralogy of the Carlile deposits and the lithologic features of the sandstone host rock suggest that uranium and vanadium were transported in the high-valent state by carbonate or sulfate solutions, were extracted from solution by organic material, and were reduced to low-valent states to form an original assemblage of oxides and silicates. These primary minerals were oxidized in place, and the present carnotite-tyuyamunite assemblage was formed. In general, radioactivity analyses correspond fairly closely with chemical analyses of uranium, thus it is believed that only minor solution and migration of uranium has occurred since the present suite of oxidized minerals was formed. The factors responsible for ore localization are not clear, but probably a combination of three lithologic and structural elements contributed to provide a favorable environment for precipitating uranium from aqueous solutions: abundant carbonaceous material or pyrite in a thin, permeable sandstone enclosed within relatively thick impermeable clays; local structural basins; and a regional structural setting involving a broad syncline between two anticlines. The structural features controlled the regional flow of ground water and the lithologic features controlled the local rate of flow and provided the proper chemical environment for uranium deposition. Bentonite has been mined from an opencut in the Mowry shale in the southwest part of the quadrangle. A bentonite bed in the Newcastle sandstone also seems to be of minable thickness and quality. Exploration for petroleum has been unsuccessful within the quadrangle; however, some wells that yielded oil were recently drilled on small anticlines to the west and southeast. It is possible that similar structural features in the Carlile area, that were previously overlooked, may be equally productive.

Wyoming↗

Range-wide assessment of livestock grazing across the sagebrush biome

Domestic livestock grazing occurs in virtually all sagebrush habitats and is a prominent disturbance factor. By affecting habitat condition and trend, grazing influences the resources required by, and thus, the distribution and abundance of sagebrush-obligate wildlife species (for example, sage-grouse Centrocercus spp.). Yet, the risks that livestock grazing may pose to these species and their habitats are not always clear. Although livestock grazing intensity and associated habitat condition may be known in many places at the local level, we have not yet been able to answer questions about use, condition, and trend at the landscape scale or at the range-wide scale for wildlife species. A great deal of information about grazing use, management regimes, and ecological condition exists at the local level (for individual livestock management units) under the oversight of organizations such as the Bureau of Land Management (BLM). However, the extent, quality, and types of existing data are unknown, which hinders the compilation, mapping, or analysis of these data. Once compiled, these data may be helpful for drawing conclusions about rangeland status, and we may be able to identify relationships between those data and wildlife habitat at the landscape scale. The overall objective of our study was to perform a range-wide assessment of livestock grazing effects (and the relevant supporting data) in sagebrush ecosystems managed by the BLM. Our assessments and analyses focused primarily on local-level management and data collected at the scale of BLM grazing allotments (that is, individual livestock management units). Specific objectives included the following: 1. Identify and refine existing range-wide datasets to be used for analyses of livestock grazing effects on sagebrush ecosystems. 2. Assess the extent, quality, and types of livestock grazing-related natural resource data collected by BLM range-wide (i.e., across allotments, districts and regions). 3. Compile and synthesize recommendations from federal and university rangeland science experts about how BLM might prioritize collection of different types of livestock grazing-related natural resource data. 4. Investigate whether range-wide datasets (Objective 1) could be used in conjunction with remotely sensed imagery to identify across broad scales (a) allotments potentially not meeting BLM Land Health Standards (LHS) and (b) allotments in which unmet standards might be attributable to livestock grazing. Objective 1: We identified four datasets that potentially could be used for analyses of livestock grazing effects on sagebrush ecosystems. First, we obtained the most current spatial data (typically up to 2007, 2008, or 2009) for all BLM allotments and compiled data into a coarse, topologically enforced dataset that delineated grazing allotment boundaries. Second, we obtained LHS evaluation data (as of 2007) for all allotments across all districts and regions; these data included date of most recent evaluation, BLM determinations of whether region-specific standards were met, and whether BLM deemed livestock to have contributed to any unmet standards. Third, we examined grazing records of three types: Actual Use (permittee-reported), Billed Use (BLM-reported), and Permitted Use (legally authorized). Finally, we explored the possibility of using existing Natural Resources Conservation Service (NRCS) Ecological Site Description (ESD) data to make up-to-date estimates of production and forage availability on BLM allotments. Objective 2: We investigated the availability of BLM livestock grazing-related monitoring data and the status of LHS across 310 randomly selected allotments in 13 BLM field offices. We found that, relative to other data types, the most commonly available monitoring data were Actual Use numbers (permittee-reported livestock numbers and season-of-use), followed by Photo Point, forage Utilization, and finally, Vegetation Trend measurement data. Data availability and frequency of data collection varied across allotments and field offices. Analysis of the BLM's LHS data indicated 67 percent of allotments analyzed were meeting standards. For those not meeting standards, livestock were considered the causal factor in 45 percent of cases (about 15 percent of all allotments). Objective 3: We sought input from 42 university and federal rangeland science experts about how best to prioritize rangeland monitoring activities associated with ascertaining livestock impacts on vegetation resources. When we presented a hypothetical scenario to these scientists and asked them to prioritize monitoring activities, the most common response was to measure ground and vegetation cover, a variable that in many cases (10 of 13 field offices sampled) BLM had already identified as a monitoring priority. Experts identified several other traditional (for example, photo points) and emerging approaches (for example, high-resolution aerial photography) to monitoring. Objective 4: We used spatial allotment data (described in Objective 1) and remotely sensed vegetation data (sagebrush cover, herbaceous vegetation cover, litter and bare soil) to assess differences in allotment LHS status ("Not met" vs. "Met"; if "Not met" - livestock-caused vs. not). We then developed logistic regression models, using vegetation variables to predict LHS status of BLM allotments in sagebrush steppe habitats in Wyoming and portions of Montana and Colorado. In general, we found that more consistent data collection at the local level might improve suitability of data for broad-scale analyses of livestock impacts. As is, data collection methodologies varied across field offices and States, and we did not find any local-level monitoring data (Actual Use, Utilization, Vegetation Trend) that had been collected consistently enough over time or space for range-wide analyses. Moreover, continued and improved emphasis on monitoring also may aid local management decisions, particularly with respect to effects of livestock grazing. Rangeland science experts identified ground cover as a high monitoring priority for assessing range condition and emphasized the importance of tracking livestock numbers and grazing dates. Ultimately, the most effective monitoring program may entail both increased data collection effort and the integration of alternative monitoring approaches (for example, remote sensing or monitoring teams). In the course of our study, we identified three additional datasets that could potentially be used for range-wide analyses: spatial allotment boundary data for all BLM allotments range-wide, LHS evaluations of BLM allotments, and livestock use data (livestock numbers and grazing dates). It may be possible to use these spatial datasets to help prioritize monitoring activities over the extensive land areas managed by BLM. We present an example of how we used spatial allotment boundary data and LHS data to test whether remotely sensed vegetation characteristics could be used to predict which allotments met or did not meet LHS. This approach may be further improved by the results of current efforts by BLM to test whether more intensive (higher resolution) LHS assessments more accurately describe land health status. Standardized data collection in more ecologically meaningful land units may improve our ability to use local-level data for broad-scale analyses.

Open-File Report↗

Reconnaissance engineering geology of the Skagway area, Alaska, with emphasis on evaluation of earthquake and other geologic hazards

A program to study the engineering geology of most of the larger Alaska coastal communities and to evaluate their earthquake and other geologic hazards was started promptly after the 1964 Alaska earthquake; this report is a product of that program. Field-study methods were largely reconnaissance, and thus the interpretations in the report are subject to revision as further information becomes available. The report provides broad guidelines for planners and engineers when considering geologic factors during preparation of land-use plans. The use of this information should lead to minimizing future loss of life and property, especially during major earthquakes. Skagway was established in 1897 as a seaport near the head of Taiya Inlet fiord in the northern part of southeastern Alaska. Rugged mountains, steep-walled valleys, fiords, and numerous glaciers and icefields characterize the landscape of the area. Valley floors are narrow and most carry large streams, which end in tidewater deltas. Skagway is situated on the delta and lower valley floor of the Skagway River. Glaciers became vastly enlarged during the Pleistocene Epoch and presumably covered the area at least several times. The last major deglaciation probably occurred about 10,000 years ago. Subsequently, there was minor expansion and then partial retreat of glaciers; land rebound because of glacial melting is still going on today. Bedrock is composed predominantly of plutonic intrusive rocks, chiefly quartz diorite and granodiorite, some metamorphic rocks and a few dikes are present. Most bedrock is of Jurassic and Cretaceous age. An assortment of surficial deposits of Quaternary age form the valley bottoms and locally part of the valley walls. Thick deposits of sand and gravel have accumulated as deltas at the heads of fiords and as alluvium in the main stream valleys; deposits may be as much as S8S feet thick at Skagway. Locally, thin deposits mantle some of the steep bedrock slopes and also form some moderately to gently sloping ground. Manmade fill covers much of the top of the delta and floor of the Skagway valley. The fill is composed chiefly of gravel and sand. Quarried blocks of granodiorite are used as riprap to face river dikes and on fill areas exposed to waves of Taiya Inlet. The geologic structure of the area is imperfectly known. However, it appears that plutonic rocks intruded metamorphic rocks in Jurassic and Cretaceous time. Extensive faulting is strongly indicated by the strikingly linear or curvilinear pattern of fiords and many large and small valleys, but no major faults have been positively identified because of concealment by water or surficial deposits. Inferred faults include those coincident with the lower Skagway valley, Taiya Inlet-Taiya valley, and the Katzehin River delta-Upper Dewey Lake. Principal fault movements probably occurred in middle Tertiary time but some movement might have been in late Tertiary or possibly early Quaternary time. Local faults appear to join the Chilkat River fault, a segment of the important Denali fault system, one of the major tectonic elements of southeastern Alaska. One fault segment of this system shows evidence of movement within the last several hundred years. Southeastern Alaska's other major fault system is the active Fairweather-Queen Charlotte Islands fault system'near the coast of the Pacific Ocean. This fault system passes to within about 100 miles of Skagway. At its northwest end the fault system merges with the Chugach-St. Elias fault. One hundred twenty-two earthquakes, some of them strong, have been felt or possibly felt at Skagway during the years 1898 through 1969. The closest large earthquake (magnitude about 8) causing some damage at Skagway occurred July 10, 1958. Its epicenter was about 100 miles to the southwest. Other earthquakes, as much as 150 miles away, also have caused slight to moderate damage. The closest instrumentally recorded earthquake (magnitude 6) had its epicenter about 30 miles to the west of Skagway. Most earthquakes in southeastern Alaska have occurred southwest, west, or northwest of Skagway, near the coast of the Pacific Ocean. They appear to be related to movement along the Fairweather-Queen Charlotte Islands fault system or the Chugach-St. Elias fault. Most have had their epicenters offshore. Some earthquakes may be related to movement at depth along the Denali fault system. The probability of destructive earthquakes at Skagway is unknown because the tectonics of the region have not been studied in detail. However, on the basis of the seismic record and limited tectonic evidence, we suggest that sometime in the future an earthquake of at least magnitude 6 probably will occur very close to the city, a magnitude 7 earthquake might occur in the general area, and an earthquake of magnitude 8 probably will occur at some distance to the southwest, west, or northwest. Effects from nearby large earthquakes could cause extensive damage at Skagway. Nine principal effects are considered. 1. Surface displacement. Displacement of ground caused by fault movement would affect only structures built athwart the fault. However, a sudden tectonic uplift of land of as much as a few feet might affect a wide area and necessitate extensive dredging and wharf rebuilding. On the other hand, a subsidence of several feet would allow tidewater to reach inland and flood part of the harbor facilities and the business district. 2. Ground shaking. Because intensity of ground shaking during earthquakes largely depends on type and water content of the geologic material being shaken, the geologic materials are separated into three categories. Those considered susceptible to strongest shaking are grouped into category 1 (containing materials that are saturated, loose, and of medium- to fine-grain sizes); those of intermediate susceptibility in category 2; and those least susceptible to shaking in category 3. 3. Compaction of some medium-grained sediments during strong earthquake shaking could cause local settling of alluvial and deltaic surfaces. Also, some manmade fills near the harbor might undergo marked differential settling. 4. Liquefaction of saturated beds of uniform, fine sand commonly occurs during strong earthquakes. Few such beds, however, are positively identified at Skagway; some may occur within deltaic and alluvial deposits. If present, these beds might liquefy and cause local settling or trigger landslides. 5. Ejection of water-sediment mixtures from earthquake-induced fractures or from point sources, plus some associated ground subsidence, is common during major earthquakes where saturated sand and fine gravel deposits are confined beneath generally impermeable beds. Some alluvial and deltaic deposits at Skagway probably are susceptible to these processes. Locally, ejecta might cover roads and areas between buildings and fill low-lying areas. Associated ground fracturing might damage roadways, foundations of buildings, and other facilities. 6. Subaerial and subaqueous slides occur frequently during earthquakes. Saturated loose sediments on steep slopes are especially susceptible to sliding. During a major earthquake, surficial deposits forming such slopes along the southeast side of the Skagway valley probably would be subject to sliding or earthflowing on an extensive scale. Some sliding might extend onto the valley floor and damage or destroy buildings and part of the railroad. Rockfalls would be numerous and locally very large rockslides might occur. Subaqueous sliding of the Skagway delta is potentially the most damaging of earthquake effects. Sliding may have occurred there during the earthquake of September 16, 1899; any future major earthquake close to the city would cause extensive sliding, possibly triggered in part by liquefaction. If shaking continued for several minutes, successive slides might progressively remove large portions of the delta and allow extensive land spreading and fracturing of Skagway River alluvium as much as several thousand feet landward from the shoreline. 7. Glacier surfaces commonly receive extensive snow avalanches and rockslides during seismic shaking. In the Skagway area, glaciers may be disrupted at their margins, and resulting blocked streams might form lakes in a few places. If these lakes drained suddenly, downstream areas would he flooded. No long-term effects, such as glacier expansion, are expected. 8. Ground- and surface-water levels often are affected during and after strong earthquake shaking. At Skagway, ground-water levels probably would be lowered, but there would be no permanent change in water quality. Earthquake-triggered landslides could dam the Skagway River; the sudden failure of the dams might cause severe flooding. 9. Waves generated by earthquakes include tsunamis, seiche waves, and waves caused by subaerial and submarine sliding and tectonic displacement of land. Damage in the Skagway area would depend on wave height, tidal stage, and warning time. Some waves triggered by subaerial and subaqueous slides have a strong possibility of reaching heights of as much as 60 feet--or possibly even higher. Tsunamis from the open ocean must travel 160 miles of fiords before reaching Skagway, which allows sufficient time for appraisal of expectable wave height and, if necessary, evacuation of the harbor area and other low-lying ground. Geologic hazards other than those hazards associated with earthquakes include nonearthquake-induced subaerial and subaqueous slides, floods, and slow uplift (rebound) of land. Landslides of moderate size are known to have occurred from time to time during heavy rains such as those of September 1967. Subaqueous slides happen intermittently during the normal growth of deltas. Submarine cables on the floor of northern Taiya Inlet presumably were broken by such slides on September 10, 1927. Flooding by the Skagway River has inundated parts of the city many times, usually during heavy rains in the fall. Two floods were reported to have been caused by the sudden draining of glacier-dammed lakes. Dikes protect the city from many smaller floods, but heightening and broadening is needed to give full protection. Slow land uplift at Skagway, because of regional glacioisostatic rebound, averages 0.059 foot per year. On this basis, the shoreline theoretically shifted seaward 500 feet and the harbor shoaled 4.4 feet between 1897 and 1972. It is recommended that future geologic study of the Skagway area include: detailed geologic mapping and collection of data on geologic materials, joints, faults, and slope stability; complete evaluation of earthquake probability and response of materials to shaking; and collection and evaluation of periodic soundings and sediment data from Skagway and Taiya deltas to assist in forecasting the stability of the delta front.

Alaska↗

Users and uses of Landsat 8 satellite imagery—2014 survey results

Executive Summary In 2013, Landsat 8 began adding high quality, global, moderate-resolution imagery to the more than 40-year archive of Landsat imagery. To assess the potential effects of the availability of Landsat 8 imagery on users and their work, the U.S. Geological Survey (USGS) Land Remote Sensing Program (LRS) initiated a survey of Landsat users. The objectives of the survey were to 1. Characterize various Landsat user groups, such as United States (U.S.) and international users and Landsat 8 and non-Landsat 8 users; 2. Identify any differences among user groups in uses and preferences; 3. Measure the importance of and satisfaction with Landsat 8 attributes; 4. Assess the importance to users of the frequency of usable imagery; and 5. Determine any challenges in using Landsat 8. The online survey was sent to 51,617 Landsat users registered with USGS in May 2014. Almost 13,000 people responded to the survey for a response rate of 25 percent (n = 12,966). Current Landsat users (users who had used Landsat in their work in the year prior to the survey) composed 89 percent of the sample (n = 11,549) and past Landsat users composed 11 percent (n = 1,417). The results reported here apply to current Landsat users registered with the USGS Earth Resources Observation and Science (EROS) Center. Users from 161 countries responded to the survey. Of those, 19 percent were citizens or permanent residents of the United States and 81 percent resided in other countries. More than 70 percent of current users had used Landsat 8 in the year prior to the survey. The majority of Landsat 8 users (65 percent) were established users who used Landsat imagery regularly both before and after Landsat 8 imagery became available. The average current Landsat user was male, 36 years old, and highly educated, with 9 years of experience using satellite imagery or geographic information system (GIS) software. Landsat 8 users had, on average, two more years of experience than non-Landsat 8 users. Users were employed predominantly by academic institutions (65 percent), followed by private businesses (13 percent), Federal governments (10 percent), State and local governments (6 percent), and nonprofit organizations (6 percent). Of the Landsat imagery obtained in the past year by current users, on average 31 percent came from a Landsat 8 sensor. An equivalent amount came from the Landsat 7 ETM+ sensor (33 percent); slightly less came from Landsats 4 and 5 TM sensors (27 percent). Much less came from Landsats 1 through 5 MSS sensors (5 percent). Overall, more than a third of users&rsquo; work used Landsat imagery (38 percent). Of this work, on average, 37 percent of the work was operational. Landsat 8 users considered a greater proportion of their work operational than non-Landsat 8 users (39 percent compared with 29 percent). Environmental sciences and management were the most commonly selected primary applications (selected by 42 percent of users). Land use/land cover (23 percent) was the second most commonly selected primary application, followed by education (12 percent), agriculture (9 percent), and planning and development (6 percent). Landsat 8 users were asked to rank the importance of certain attributes in determining whether to use Landsat 8 imagery in their work. The archive was ranked most important, followed by cost, spatial resolution, extent of coverage, data quality, and frequency of revisit. Users were asked how satisfied they were with these same attributes as they currently apply to Landsat 8 imagery. On average, users were most satisfied with lack of cost, extent of coverage, data quality, and the archive, but they were satisfied with all attributes. Users were asked how often they needed Landsat imagery to meet various requirements for their primary application. The survey question specifically asked how often users needed usable imagery, which differs from how often they would like the Landsat satellites to acquire an image. Users were asked to identify their needed frequency of usable imagery for the following levels: 1. Threshold level&mdash;the minimum frequency of usable imagery needed to be of any value to their primary application. 2. Breakthrough level&mdash;the frequency of usable imagery that would result in a significant improvement for their primary application of the imagery. 3. Target level&mdash;the frequency of usable imagery that would only provide a limited additional increase in the expected performance for their primary application. To meet the threshold level, three-quarters of users needed usable imagery every 17 days or less frequently. At the breakthrough level, two-thirds of users (64 percent) needed a usable image every 5&ndash;16 days. The current constellation of two satellites (Landsat 7 and 8) is capable of meeting the threshold and breakthrough needs of most users at least some of the time, but a single satellite would be highly unlikely to do so. Two-fifths of users (40 percent) felt that usable imagery provided every 4 days or more frequently would meet their target level which the current Landsat constellation cannot provide. Landsat 8 users were significantly more likely than non-Landsat 8 users to need usable imagery more frequently to meet their target levels. Additionally, U.S. Landsat 8 users were significantly more likely than other Landsat users to need usable imagery more frequently in order meet both their breakthrough and target levels. To explore the effect of the availability of Landsat 8 imagery on Landsat imagery use in general, established users (those who had consistently used Landsat imagery both before and after Landsat 8 imagery became available) using Landsat 8 imagery were asked about changes in the amount of Landsat imagery they used. The majority of established users using Landsat 8 imagery (60 percent) reported an average increase of 51 percent in the number of scenes obtained after Landsat 8 imagery became available. Landsat 8 users were asked if they had encountered challenges in using Landsat 8 whereas non-Landsat 8 users were asked if such challenges had played a role in why they were not using Landsat 8 imagery. Although many users did not encounter challenges when using or trying to use Landsat 8 data, slightly less than 30 percent did encounter issues with processing the data to a usable point. The most common issue reported was not being able to create or have access to a surface reflectance corrected product. Other challenges were related to the file sizes of images being too large to download, store, or analyze. There were no statistically significant differences between Landsat 8 and non-Landsat 8 users in terms of challenges encountered when using or trying to use the imagery, which indicates that users were not unduly discouraged by the challenges they may have encountered. When asked about potential consequences of not using Landsat 8, more than half of the non-Landsat 8 users did not report detrimental effects on their work from not using the imagery. Of those who did report detrimental effects, decreased quality of work, decreased scope of work, and increased time spent on work were the most common.

Open-File Report↗