USGS Science⌕ Search

SEARCH · USGS Science

Results for “Water Biology and Security”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,663 records · Page 53Linked to original sources
USGS2025

Summary of results from monitoring the Geysers with continuous passive seismic and repeat magnetotelluric measurements (2021-2023)

Understanding temporal variations in a geothermal field can support operators in decision making that pertains to optimizing production and mitigating hazards. Between 2021 and 2023, The Geysers geothermal field in northern California was monitored with an array of continuous passive seismic sensors and annual repeat magnetotelluric (MT) measurements. Each of these data sets were analyzed and modelled separately to understand the data, sensitivity, and any observable changes. Then, the data were inverted jointly using a crossgradient method to further constrain temporal changes in geophysical properties within the geothermal field. Multiple permutations of annual datasets were used as inputs to the joint inversion. Results demonstrate seismic data constrain smooth inversion of the MT data, and the MT data provide supplementary information about the location of temporal fluid changes. Estimating relative changes in steam saturation for various time intervals of the joint models shows compartmentalized changes in the field, and good spatial correlation with the location of injection wells. These results demonstrate that collecting both passive seismic and MT measurements then modeling them jointly provide complementary information and a relatively inexpensive method for monitoring temporal changes in an active geothermal field that provides results to support operators.

California↗
USGS2025

Tracing mercury from land to river: Global sources, retention, and implications for sustainability

Mercury (Hg) pollution in river systems is a global sustainability challenge. Yet the transport, transformation, and retention of Hg within global rivers remain poorly quantified, particularly in regions with sparse observations such as Southeast Asia and Africa, hindering effective pollution mitigation and reinforcing geographic inequities in scientific knowledge and environmental governance. Here, we present the first global, high-resolution simulation of riverine Hg dynamics using a process-based model that traces Hg from land-based sources through river networks to the ocean. Under a realistic scenario, we estimate that ~1,900 megagrams per year (Mg/yr) of Hg enters global rivers, including 1,500 Mg/yr from human-induced sources and 400 Mg/yr from soil erosion. Nearly half of this flux (~1,000 Mg/yr) is retained in reservoirs and dams, which act as major sinks. While such retention limits downstream delivery to the oceans, it also heightens in-reservoir Hg methylation risks. By bridging the gap between Hg releases and observed riverine exports, our framework offers a scalable tool for data-limited regions, promotes data access, and supports global freshwater and pollution-management strategies.

EarthArXiv↗
USGS2026

Understanding the resource potential of natural hydrogen on Earth: Scientific gaps, uncertainties and recommendations

A comprehensive scientific research roadmap is essential to bridge knowledge gaps and deepen the understanding of key geological, geochemical, and geophysical aspects of natural hydrogen (H 2 ) as a potential new energy resource. This paper reviews major scientific uncertainties on natural H 2 , suggesting research priorities, as a guide for defining exploration strategies, techniques, and data interpretation. The uncertainties concern all phases of the natural H 2 cycle, from generation (source rocks) through migration (advection and diffusion) and accumulation (reservoir and cap rocks) to the application and interpretation of subsurface and surface geochemical and geophysical exploration techniques. Understanding H 2 sources and generation rates (the amount of H 2 generated by a given volume of rock over time) is crucial for determining whether a geological H 2 system operates as a short-term dynamic system with rapid H 2 production and release, or as a conventional gas system with long-term accumulations, analogous to petroleum reservoirs. Preliminary estimates for serpentinisation, radiolysis, and organic matter degradation suggest that H 2 generation is not inherently fast, especially for non-hydrothermal continental systems (crystalline basement of shields, ophiolites, peridotite massifs, sedimentary basins), and long-term accumulations, like those of fossil natural gas systems, represent the most likely scenario. The mechanisms of H 2 migration through geological formations require application of fundamental principles of fluid-flow physics, distinguishing advection and diffusion, as well as their forms (from gas-phase, bubble flows to aqueous solutions). Additional studies of H 2 accumulation and retention in subsurface reservoirs could improve understanding of mechanisms of H 2 migration by focusing on the rock fluid-bearing properties and the factors affecting H 2 preservation, such as the presence of cap rocks impermeable to H 2 , pressure conditions, residence times, and microbial or abiotic consumption. Advanced techniques, including reservoir modelling, flow simulations, 3D imaging (micro-CT) of H 2 -bearing rocks, and extraction and analysis of gas occluded in rocks, can provide insights into the stability and potential recoverability of H 2 accumulations. The interpretation of surface exploration techniques, including gas geochemistry, geophysics, and remote sensing, long employed in mineral and energy resource exploration, is now being adapted for natural H 2 studies, but challenges remain in the data interpretation. Distinguishing H 2 seepage due to geological degassing from H 2 produced near the surface by modern microbial processes or artificial sources, such as hammering or drilling for soil-gas sampling, drilling into aquifers, and corrosion in boreholes, is an essential step in exploration. The simple detection of H 2 in soils, even in morphological structures like sub-circular depressions or “fairy circles”, cannot be cursorily interpreted as a signal of natural H 2 seepage from a deep source. A holistic geochemical approach, including isotopic analyses of gases associated with H 2 , is recommended to distinguish among the variety of possible H 2 origins. Observations of H 2 in wells should be interrogated to rule out possible artifacts such as corrosion and drill bit metamorphism. The integration of multiple geophysical methods, including seismic, gravimetric, magnetic, and electro-magnetic surveys, is recommended to mitigate interpretation ambiguities regarding the structure of a subsurface H 2 system (source and reservoir rocks, including fluid and gas storage), due to the non-uniqueness of rock-specific physical properties.

Earth-Science Reviews↗
USGS2026

A deep dive into subduction zones and the Japan Trench

Deep beneath the ocean, giant slabs of rock slide beneath one another in areas called subduction zones. These powerful movements shape the planet by building mountains, creating fiery volcanoes, and even causing huge earthquakes. Scientists study subduction zones to understand why these natural events happen and where and how they might occur so we can be better prepared. One important subduction zone is the Japan Trench, where a big earthquake happened in 2011. To learn more about subduction zones, scientists go on ocean drilling expeditions. They sail on research ships, drill into the seafloor, and collect rock samples. These samples help scientists understand what happened in the past and how subduction zones work. In turn, this information helps communities better understand and prepare for future earthquakes.

Frontiers for Young Minds↗
USGS2026

Tracing mercury from land to river: Global sources, retention, and implications for sustainability

Mercury (Hg) pollution in river systems is a global sustainability challenge. Yet the transport, transformation, and retention of Hg within global rivers remain poorly quantified, particularly in regions with sparse observations such as Southeast Asia and Africa, hindering effective pollution mitigation and reinforcing geographic inequities in scientific knowledge and environmental governance. Here, we present the first global, high-resolution simulation of riverine Hg dynamics using a process-based model that traces Hg from land-based sources through river networks to the ocean. Under a realistic scenario, we estimate that ∼1900 megagrams per year (Mg/yr) of Hg enters global rivers, including 1500 Mg/yr from human-induced sources and 400 Mg/yr from soil erosion. Nearly half of this flux (∼1000 Mg/yr) is retained in reservoirs and dams, which act as major sinks. While such retention limits downstream delivery to the oceans, it also heightens in-reservoir Hg methylation risks. By bridging the gap between Hg releases and observed riverine exports, our framework offers a scalable tool for data-limited regions, promotes data access, and supports global freshwater and pollution-management strategies.

Environmental Science & Technology↗
USGS2025

Depth of magma crystallization and fluid exsolution beneath the porphyry-skarn Cu deposits at Santa Rita and Hanover-Fierro, New Mexico, USA

The depth level at which porphyry Cu–forming magmas fractionated and exsolved mineralizing fluids is actively debated. In the classic model, extensive magma fractionation occurs in large, upper crustal magma chambers, and concomitant fluid exsolution leads to forceful expulsion of residual magmas in the form of porphyry dikes, stocks, and breccia pipes, which subsequently serve as pathways for the mineralizing fluids. In contrast, some recent studies highlighting the role of deep crustal magma fractionation in the production of fertile magmas essentially deny the existence of upper crustal magma chambers at the time of mineralization. To address this, we conducted a detailed thermobarometric investigation of 13 intermediate to felsic, porphyritic intrusive rocks related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, United States, representing two premineralization magmas (61–60 Ma), seven synmineralization magmas (60–58 Ma), and four late- to postmineralization magmas (58–57 Ma). For each sample, the pressure of last magma crystallization before final magma ascent to the current exposure level was reconstructed based on Al-in-hornblende barometry of small hornblende inclusions trapped within quartz phenocrysts and through titanium-in-quartz (TitaniQ) thermobarometry of the host quartz phenocrysts themselves. Since quartz is one of the last crystallizing magmatic minerals, and no significant phenocryst growth could have occurred in small dikes and stocks after final magma emplacement, quartz phenocrysts and their contained hornblende inclusions record the depth of last magma crystallization before final magma ascent. When present, hornblende phenocrysts and hornblende inclusions within other major phenocrysts were also analyzed. Both quartz and hornblende barometers return consistent average pressures of 3.2 ± 0.4 kbar for the entire suite of pre- to postmineralization magmas, corresponding to depths of 11 to 14 km. The synmineralization magmas return even more consistent average pressures of 3.1 ± 0.2 kbar, corresponding to a depth of 12 ± 1 km. The volume of the mineralizing porphyry dikes and stocks at the emplacement level is far too small to have provided all the fluids and metals required to form the observed ore deposits. Therefore, the majority of the ore-forming fluids must have originated from the magmas that crystallized at 12 ± 1 km depth. The ore deposits, conversely, formed at ~5-km paleodepth. This implies that most of the mineralizing fluids traveled an average vertical distance of ~7 km from their magmatic source to the eventual site of ore precipitation. The relatively unaltered nature and low veining degree of deeper parts of mineralized porphyry dikes and stocks suggest that the fluid transport through these intrusive bodies occurred mostly at near-solidus conditions by means of fluid percolation along grain boundaries. In summary, our results suggest that (1) a large, upper crustal pluton exists ~7 km beneath the Santa Rita and Hanover-Fierro deposits; (2) abundant phenocryst crystallization occurred at this depth level; and (3) this pluton was the main source for the exsolution of ore-forming fluids. However, the investigated rocks have elevated whole-rock Sr/Y ratios, indicating magma fractionation at deep crustal levels. As a result, our preferred model is a combination of the two end-member models introduced above, with most magma fractionation having occurred in the deep crust and with residual, intermediate to felsic melts having ascended and accumulated at 11 to 14 km paleodepth, where they continued to crystallize with comparatively little crystal-liquid separation, before some of these magmas ascended further to shallow levels and quenched to porphyries.

New Mexico↗
USGS2025

Multi-lithofacies alluvial characterization via airborne electromagnetic-borehole fusion using ordinary interval kriging and geologic constraints

Airborne electromagnetic (AEM) survey provides extensive spatial coverage and detailed resolution at the near surface and can be used to develop hydrogeological models. However, utilization of AEM data is not straightforward because AEM resistivity is an indirect measurement for inferring sediment types. This study develops an ordinary interval kriging (OIK) algorithm and a resistivity-to-multi-lithofacies (R2ML) data fusion workflow for multi-lithofacies alluvial characterization. OIK utilizes irregular interval data to construct three-dimensional (3D) resistivity fields from one-dimensional inverted AEM resistivity models. The R2ML workflow maps the resistivity field generated from OIK into a multi-facies lithological model, incorporating geologic constraints derived from well logs and geological observations. The numerical and real-world cases demonstrate that OIK is computationally efficient, accounts for 3D anisotropy, and minimizes the smoothing effect, thereby preserving resistivity contrasts and reducing interpolation uncertainty. The methodology is applied to lithologic characterization of the Mississippi River Valley alluvial aquifer (MRVA) in the Shellmound area, Mississippi, U.S. A frequency-domain AEM survey was conducted to support groundwater studies for the managed aquifer recharge (MAR) to the MRVA. The resulting lithological model, including four types of lithofacies—clay, very fine sand, fine-medium sands, and graveliferous sands, illustrates the geomorphological processes of the MRVA and implies potential MAR. The alignment between the lithological model and existing geological and hydrogeological investigations demonstrates that OIK and R2ML workflow effectively capture the subsurface architecture of the MRVA. The methods have broad applicability for characterizing alluvial aquifers through AEM-borehole data fusion, supporting sustainable groundwater management.

Mississippi↗
USGS2024

Ambient flow and transport in long-screened, sand-packed wells: Insights into cross contamination and wellbore flow

The presence of long-screened wells with a surrounding sand pack can have a major effect on the redistribution of contaminants in groundwater, particularly when the wells are set in low-hydraulic conductivity aquifers. Such redistribution, or cross contamination, can occur through vertical flow and advective transport or by in-well mixing via multiple non-advective transport processes. A multi-method approach, including the use of single borehole dilution tracer (SBDT) logging, was undertaken to estimate vertical transport of trichloroethylene (TCE) in 8 discontinued remedial extraction wells, all constructed with long screens (100 ft, or 30.6 m long) and surrounding sand packs, at Site 25, Edwards Air Force Base, California. The site is within an enclosed drainage basin that is underlain primarily by quartz-monzonite-granitic rocks in various states of weathering. Prior to this study, little information was available on the depths of fracture zones intersecting the wellbores. Results indicate that because of in-well mixing processes, a potential redistribution of TCE of up to 9 g/d per well occurs as a consequence of leaving the wells inactive (unpumped) and unsealed, as measured by SBDT logging. Simulations of flow made with a generic model of the site show that if the wells were to be sealed with well liners, with the intent of reducing vertical TCE transport but the sand pack left intact, TCE transport decreases by 53% overall compared to leaving the wells unlined.

Environmental Earth Sciences↗
USGS2025

Pre-Acadian tectonics of the eastern Orange-Milford Belt, south-central Connecticut

This excursion presents a reinterpretation of mapping and new analytical data from the eastern Orange-Milford belt (OMB) in south-central Connecticut. The OMB is a fault-bound terrane of argillites and mafic rocks of anomalously low metamorphic grade—and of poorly constrained ages and tectonic affinity—wedged between kyanite/sillimanite-grade peri- Laurentian rocks to the west and anatectic peri-Gondwanan rocks to the east (Fig. 1A). Our data demonstrate that Ordovician(?) igneous and sedimentary rocks of the OMB were variably metamorphosed in the Ordovician and Silurian but escaped regionally pervasive, high-grade Devonian and later metamorphism. Previous interpretations (Fritts 1963a, 1965a, 1965b; Burger, 1967; Burger and others, 1968; Rodgers, 1985) described these rocks as a conformable sequence of low-grade, Ordovician to Devonian metasediments and metavolcanics. Our results reveal that the “metavolcanics” are not extrusive rocks but rather slivers of lower oceanic crust with complicated high- and low-grade metamorphic fabrics, intruded by a swarm of Silurian sheeted basalt dikes, and in fault contact with the surrounding metasediments. The purpose of this trip is to show evidence of early Paleozoic (Taconic) deformation and metamorphism preserved in rocks of the eastern OMB. These rocks remained shallow, cool, and sufficiently dry during the regionally dominant Acadian and Alleghanian orogenies to have avoided significant overprinting. As such, these rocks serve as windows into a geologic history otherwise unavailable between anatectic rocks of the peri-Gondwanan Bronson Hill, Avalon, and Gander terranes east of the Hartford basin and sillimanite-grade rocks of the peri-Laurentian Hartland and gneiss dome belts west of the OMB. We present major and trace element geochemistry including rare-earth element patterns for all mafic units in the eastern OMB as well as 40 Ar/ 39 Ar age spectra of amphibole, muscovite, and K-feldspar from rocks of the Maltby Lakes complex (of Deasy and others, 2017), Savin Schist, and Wepawaug Schist. Our evidence demonstrates that the units of the OMB have been assembled by faulting or intrusion, and that no stratigraphic relationships exist between the argillaceous schists and the metaigneous rocks.

Connecticut↗
USGS2026

Aspergillosis (Avian) case definition for wildlife

Diagnostic laboratories receive carcasses and samples for diagnostic evaluation and pathogen/toxin detection. Case definitions bring clarity and consistency to the evaluation process. Their use within and between organizations allows more uniform reporting of diseases and etiologic agents. The intent of a case definition is to provide scientifically based criteria for determining: (a) if an individual carcass has a specific disease and degree of confidence in that diagnosis and (b) if there is evidence of a pathogen or toxin in a carcass or sample (for example, swab, tissue sample, skin scraping, blood/serum sample, environmental sample, or other). This case definition is specific to aspergillosis and applies to all avian species.

Techniques and Methods↗
USGS2025

Rapid fault healing from cementation controls the dynamics of deep slow slip and tremor

Despite its status as one of the most important discoveries in geophysics, the physical mechanism(s) responsible for slow slip events (SSEs) are not well understood. Here, we synthesize observations of deep SSEs in the Cascadia Subduction Zone and argue that rapid, cohesive fault strengthening may control the dynamics of deep SSEs. Cohesive strength is frequently ignored in constitutive laws used to describe fault rheology in numerical simulations of earthquakes and SSEs alike. To demonstrate its importance, we perform and analyze a suite of petrological experiments that simulate fault healing under representative pressure and temperature conditions. We show that significant cohesive strength recovery caused by dissolution-precipitation processes occurs on timescales of just a few hours. Together, our experimental and observational results support the idea that cohesion is a key component of fault strength under SSE conditions and highlight the need for its inclusion in both future experiments and numerical models of fault slip.

British Columbia, Washington↗
USGS2024

Plan to coordinate post-earthquake investigations supported by the National Earthquake Hazards Reduction Program (NEHRP)

Introduction This report presents a plan supported by the National Earthquake Hazards Reduction Program (NEHRP) to coordinate domestic and international post-earthquake investigations (herein called “the Plan”). Post-earthquake scientific and engineering investigations are undertaken to capture critical information to understand the causes and impacts of the event, lessons from which can substantially improve the Nation’s resilience after future earthquakes. NEHRP is the Federal Government’s coordinated nationwide program to reduce risks to life and property from earthquakes. The Plan describes the activation and coordination of the four designated NEHRP Agencies in the Federal Government: Federal Emergency Management Agency, National Institute of Standards and Technology, U.S. National Science Foundation, and U.S. Geological Survey (USGS). The Plan also describes coordination between NEHRP Agencies and other organizations that may participate in pre-event and post-earthquake investigations, including non-NEHRP Federal agencies; State, regional, local, Tribal, and territorial agencies; domestic nongovernmental organizations; academic institutions and affiliated organizations; private companies; foreign governmental agencies and nongovernmental organizations; and international organizations. The Plan delineates the coordination of NEHRP post-earthquake scientific and engineering investigations to document the direct, indirect, and cascading physical and societal impacts from fault rupture and ground shaking hazards and from secondary hazards such as landslides, liquefaction, and tsunamis. In addition, the Plan identifies pre-event activities necessary to ensure that post-earthquake investigations are executed effectively. The USGS is the lead NEHRP Agency for activating and coordinating NEHRP post-earthquake investigations and for implementing this Plan. The USGS also leads coordination of the NEHRP Agencies in completing the pre-event activities identified in the Plan. The Plan has new information and supersedes USGS Circular 1242, “The Plan to Coordinate NEHRP Post-Earthquake Investigations,” which was published in 2003. This second-generation Plan was developed with the assistance of the Applied Technology Council (ATC) of Redwood City, California, under USGS contract 140G0121P0309, ATC-155. A 17-member Project Review Panel provided guidance on plan development, and input was solicited from subject matter experts representing key stakeholder groups and from participants at a public workshop.

Circular↗
USGS2025

Dynamic feedbacks between river meandering and landsliding in northwestern Washington glacial terraces

Landsliding in river valleys poses unique risks for cascading hazards and can damage infrastructure and cause fatalities. In postglacial valleys, many landslides are posited to occur in relation to lateral river erosion, but the dynamics of fluvial-hillslope interactions are not well understood. Here, we investigate a section of the Nooksack River in western Washington State where the channel is flanked by landslide-prone glacial terraces similar to those that failed in the 2014 State Route 530 “Oso” landslide. We map 216 landslides through time across 17 aerial imagery data sets (1933–2022) and analyze them in relation to river meandering and curvature. We observe dynamic feedbacks between lateral river meandering and valley-adjacent landsliding. Terrace lateral retreat rates of up to 25 m/year owing to combined fluvial erosion and slope failure occur on pinned, outer meander bends immediately downstream from peaks in river curvature (>0.0075 1/m); these locations are predisposed to both shallow and deep-seated landslides. Deep-seated landslides extending 17%–32% of the active valley width into the floodplain can displace the river away from the floodplain margin and change the channel planform. River-displacing landslides relocate meanders up- or downstream, thereby conditioning the location of subsequent landslides. This conceptual model of coupled landslide-driven meander displacement and valley-adjacent landsliding is exemplified across western Washington river systems. The distance between up- and downstream valley-adjacent landsliding scales with valley width, meander wavelength, and terrace height. Our results can advance our understanding of the river-hillslope interface in landscape evolution and can be used to inform hazard management in river corridors.

Washington↗
USGS2025

Unveiling coseismic deformation from differenced legacy aerial photography and modern lidar topography: The 1983 M6.9 Borah Peak earthquake, Idaho, USA

The 1983 M6.9 Borah Peak, Idaho, earthquake is one of the largest historical normal fault earthquakes in the western United States. We quantified meter-scale vertical change along the 35 km-long rupture using topographic differencing of 1966 aerial imagery and 2019 lidar-derived data. The initial differencing results are largely obscured by horizontal and vertical georeferencing errors and flight-line stripes. Our error corrections are designed to be insensitive to the coseismic deformation and reduced error by 50%. We calculated vertical separation and resolved a maximum of 2.02 ± 0.46 m at Doublespring Pass. Our vertical separation measurements are generally consistent with those from prior studies using field data and post-earthquake topographic data. However, the differencing measurements are a few decimeters lower than these prior measurements, indicating that differencing can isolate historical from prehistoric earthquake deformation. Our study demonstrates that revisiting historical earthquakes can provide new insights into the magnitude and patterns of coseismic deformation.

Idaho↗
USGS2026

USGS 2025 critical minerals review

The United States Geological Survey (USGS) provides scientific information for the Department of Interior and the nation, consistent with its original mission expressed in the Organic Act of 1879 (43 U.S.C. 31): “the classification of the public lands and examination of the geological structure, mineral resources, and products within and outside the national domain.” Legislation such as the Energy Act of 2020 and the 2022 Infrastructure Investment and Jobs Act (43 USC 31l) and recent executive actions (Executive Orders 14154 , 14153, 14241 Secretary’s Orders 3417, 3418, 3422, 3436) underscore the importance of mineral resources and focus USGS activities on mapping and assessing mineral resources, with a particular focus on those presently identified as critical, both in ground and above ground in mine wastes. This article reviews selected activities and accomplishments by the USGS Mineral Resources Program related to critical minerals in 2025. Highlights include a new List of Critical Minerals, a first-ever national mine waste inventory, international minerals partnerships, mineral resource assessment advancements, and national data collection activities and outcomes of the Earth Mapping Resources Initiative (Earth MRI). The selected contributions are not comprehensive but are intended to demonstrate USGS leadership in critical mineral mapping and assessment, the importance of domestic and global partnerships, and the breadth of research activities that are responsive to national needs and priorities.

Mining Engineering↗
USGS2025

Comparative properties of saponitic fault gouge and serpentinite muds cored from mud volcanoes of the Mariana subduction zone

We obtained 12 core samples for physical and chemical characterization from three serpentinite mud volcanoes (Yinazao, Asùt Tesoru, and Fantangisña) located on the forearc of the Mariana subduction system, that were drilled during International Ocean Discovery Program Expedition 366. Two samples from the Fantangisña mud volcano are interpreted to be clay-rich fault gouges derived from the subduction channel. Their bulk compositions are intermediate between the serpentinites and oceanic basalts. The oceanic crustal materials in the gouges have been thoroughly metasomatized and the serpentinites extensively altered to the trioctahedral, Mg-rich smectite clays saponite and corrensite. The only relict phases in clasts of crustal rock are accessory Ti- and P-bearing minerals. The two fault gouge samples have lower frictional strengths ( μ < 0.2) than the serpentinites ( μ = 0.2–0.4), and their measured permeabilities are also somewhat lower. Their physical and compositional properties correspond to saponitic gouges from other faults that juxtapose serpentinite against crustal rocks, in particular gouges from the two creeping traces of the San Andreas Fault recovered in the core from the San Andreas Fault Observatory at Depth. The décollement beneath Fantangisña mud volcano is thus expected to be very weak and likely characterized by stable slip.

Geophysics, Geochemistry, Geosystems↗
USGS2024

Evaluation of an open earthquake early warning system in Mexico, and laboratory tests of their sensors

Microelectromechanical system (MEMS) accelerometers are useful for seismological and engineering applications because of their ability to record unsaturated large seismic signals. Recent advances in MEMS technologies enable the design of instruments with improved capabilities that also allow the recording of small signals. As a result, MEMS can be useful across a broad dynamic range and for both major earthquakes and smaller magnitude events. Here, we analyze the performance of a MEMS‐based accelerometer with the capability of real‐time data transmission. We discuss the self‐noise level, dynamic range, and sensitivity, along with the timing precision and data transmission latency, and compare these parameters to other MEMS‐based instruments. We also summarize observations from a regional network deployed in southern Mexico over a period of 3+ yr for the purpose of earthquake early warning. In addition to the sensor evaluation, we present a large, openly available data set of strong motion data from the Mexican network that comprises continuous ground‐motion records from 24 accelerometers in the period between 2017 and 2022.

Seismological Research Letters↗