USGS Science⌕ Search

SEARCH · USGS Science

Results for “The Earth Observer”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53Linked to original sources
USGS2012

Lithospheric loading by the 1896 Riku-u earthquake, northern Japan: Implications for plate flexure and asthenospheric rheology

Under favorable circumstances the time-dependent aseismic deformation resulting from the loading of the lithosphere by the stress drop of large dip slip earthquakes can be used to determine both the effective elastic plate thickness and the asthenospheric viscosity. The deformation has several similarities with the deflection of the lithosphere by surface loads and with movements due to postglacial rebound. Level changes obtained in the 80 years since the M = 7.5, 1896 Riku-u earthquake, an intraplate thrust event in northern Honshu, provide convincing evidence that asthenospheric readjustments are responsible for the observed movements. Leveling surveys crossing the zone of surface faulting have been repeated five times since 1900 and delineate a localized depression that has subsided at a continually decreasing rate. The depression is centered close to the 1896 faulting, and its shape and width, about 75 km, are matched by our model using a plate thickness of 30 km. The decaying subsidence rate constrains the viscosity of the uppermost asthenosphere to be 1×10 20 P. A linear viscous rheology matches the observed decay quite well, although measurements are sparse during the several decades following the earthquake.

Journal of Geophysical Research Solid Earth↗
USGS2025

Memory and jamming in fault zone sediments

Many subsurface processes involve transitions in granular material states, from arrested to creeping to flowing. Experiments and frameworks for idealized systems reveal that granular fabrics develop during shearing, co-evolve with applied stress, and govern such transitions. We use microtomography to test whether fabrics at two San Andreas fault sites reflect slip history and whether idealized frameworks extend to nature. Near-surface sediments within the fault zone transition between deformation patterns over the seismic cycle, including bulk/localized grain re-arrangements, individual grain fracturing, and localized zones of fracturing. Aseismic and co-seismic shearing produce distinct preferred grain orientations. Co-seismic fabrics can be preserved after centuries of aseismic strain, aseismic fabrics may be overprinted, and grain size and coordination number influence the fabrics. Idealized frameworks, namely anisotropic critical state theory, frictional jamming, and material memory, can explain our observations, and fault zone sediments likely undergo cycles of memory creation and erasure that influence rigidity spatiotemporally.

California↗
USGS2009

Sediment-hosted zinc-lead deposits of the world— Database and grade and tonnage models

This report provides information on sediment-hosted zinc-lead mineral deposits based on the geologic settings that are observed on regional geologic maps. The foundation of mineral-deposit models is information about known deposits. The purpose of this publication is to make this kind of information available in digital form for sediment-hosted zinc-lead deposits. Mineral-deposit models are important in exploration planning and quantitative resource assessments: Grades and tonnages among deposit types are significantly different, and many types occur in different geologic settings that can be identified from geologic maps. Mineral-deposit models are the keystone in combining the diverse geoscience information on geology, mineral occurrences, geophysics, and geochemistry used in resource assessments and mineral exploration. Too few thoroughly explored mineral deposits are available in most local areas for reliable identification of the important geoscience variables, or for robust estimation of undiscovered deposits - thus, we need mineral-deposit models. Globally based deposit models allow recognition of important features because the global models demonstrate how common different features are. Well-designed and -constructed deposit models allow geologists to know from observed geologic environments the possible mineral-deposit types that might exist, and allow economists to determine the possible economic viability of these resources in the region. Thus, mineral-deposit models play the central role in transforming geoscience information to a form useful to policy makers. This publication contains a computer file of information on sediment-hosted zinc-lead deposits from around the world. It also presents new grade and tonnage models for nine types of these deposits and a file allowing locations of all deposits to be plotted in Google Earth. The data are presented in FileMaker Pro, Excel and text files to make the information available to as many as possible. The value of this information and any derived analyses depends critically on the consistent manner of data gathering. For this reason, we first discuss the rules applied in this compilation. Next, the fields of the data file are considered. Finally, we provide new grade and tonnage models that are, for the most part, based on a classification of deposits using observable geologic units from regional-scaled maps.

Open-File Report↗
USGS2019

Remote sensing of dryland ecosystem structure and function: Progress, challenges, and opportunities

Drylands make up roughly 40% of the Earth's land surface, and billions of people depend on services provided by these critically important ecosystems. Despite their relatively sparse vegetation, dryland ecosystems are structurally and functionally diverse, and emerging evidence suggests that these ecosystems play a dominant role in the trend and variability of the terrestrial carbon sink. More, drylands are highly sensitive to climate and are likely to have large, non-linear responses to hydroclimatic change. Monitoring the spatiotemporal dynamics of dryland ecosystem structure (e.g., leaf area index) and function (e.g., primary production and evapotranspiration) is therefore a high research priority. Yet, dryland remote sensing is defined by unique challenges not typically encountered in mesic or humid regions. Major challenges include low vegetation signal-to-noise ratios, high soil background reflectance, presence of photosynthetic soils (i.e., biological soil crusts), high spatial heterogeneity from plot to regional scales, and irregular growing seasons due to unpredictable seasonal rainfall and frequent periods of drought. Additionally, there is a relative paucity of continuous, long-term measurements in drylands, which impedes robust calibration and evaluation of remotely-sensed dryland data products. Due to these issues, remote sensing techniques developed in other ecosystems or for global application often result in inaccurate, poorly constrained estimates of dryland ecosystem structural and functional dynamics. Here, we review past achievements and current progress in remote sensing of dryland ecosystems, including a detailed discussion of the major challenges associated with remote sensing of key dryland structural and functional dynamics. We then identify strategies aimed at leveraging new and emerging opportunities in remote sensing to overcome previous challenges and more accurately contextualize drylands within the broader Earth system. Specifically, we recommend: 1) Exploring novel combinations of sensors and techniques (e.g., solar-induced fluorescence, thermal, microwave, hyperspectral, and LiDAR) across a range of spatiotemporal scales to gain new insights into dryland structural and functional dynamics; 2) utilizing near-continuous observations from new-and-improved geostationary satellites to capture the rapid responses of dryland ecosystems to diurnal variation in water stress; 3) expanding ground observational networks to better represent the heterogeneity of dryland systems and enable robust calibration and evaluation; 4) developing algorithms that are specifically tuned to dryland ecosystems by utilizing expanded ground observational network data; and 5) coupling remote sensing observations with process-based models using data assimilation to improve mechanistic understanding of dryland ecosystem dynamics and to better constrain ecological forecasts and long-term projections.

Remote Sensing of Environment↗
USGS2017

Numerical simulation of the paleohydrology of glacial Lake Oshkosh, eastern Wisconsin, USA

Proglacial lakes, formed during retreat of the Laurentide ice sheet, evolved quickly as outlets became ice-free and the earth deformed through glacial isostatic adjustment. With high-resolution digital elevation models (DEMs) and GIS methods, it is possible to reconstruct the evolution of surface hydrology. When a DEM deforms through time as predicted by our model of viscoelastic earth relaxation, the entire surface hydrologic system with its lakes, outlets, shorelines and rivers also evolves without requiring assumptions of outlet position. The method is applied to proglacial Lake Oshkosh in Wisconsin (13,600 to 12,900??cal yr BP). Comparison of predicted to observed shoreline tilt indicates the ice sheet was about 400??m thick over the Great Lakes region. During ice sheet recession, each of the five outlets are predicted to uplift more than 100??m and then subside approximately 30??m. At its maximum extent, Lake Oshkosh covered 6600??km2 with a volume of 111??km3. Using the Hydrologic Engineering Center-River Analysis System model, flow velocities during glacial outburst floods up to 9??m/s and peak discharge of 140,000??m3/s are predicted, which could drain 33.5??km3 of lake water in 10??days and transport boulders up to 3??m in diameter. ?? 2007 University of Washington.

Quaternary Research↗
USGS2021

Multimineral petrophysics of thermally immature Eagle Ford Group and Cretaceous mudstones, U.S. Geological Survey Gulf Coast 1 research wellbore in central Texas

Traditional petrophysical methods to evaluate organic richness and mineralogy using gamma-ray and resistivity log responses are not diagnostic in source rocks. We have developed a deterministic, nonproprietary method to quantify formation variability in total organic carbon (TOC) and three key mudrock mineralogical components of nonhydrocarbon-bearing source rock strata of the Eagle Ford Group by developing a set of log-derived multimineral models calibrated with Fourier transform infrared spectroscopy core data from the research borehole U.S. Geological Survey Gulf Coast 1 West Woodway. We determined that bulk density response is a reliable indicator of organic content in these thermally immature, water-bearing source rocks. Multimineral findings indicate that a high degree of laminae-scale mineralogical heterogeneity exists due to thinly interbedded carbonate cements amid clay-rich mudstone layers. The lower part of the Eagle Ford Group contains the highest average TOC content (4.7 wt%) and the highest average carbonate volume (64.1 vol%), making it the optimal target in thermally mature areas for source-rock potential and hydraulic-fracture placement. In contrast, the uppermost portion of the Eagle Ford Group contains the highest average volume of clay minerals (42.6 vol%), which increases the potential for wellbore stability issues. Petrophysical characterization reveals that porosity is approximately 30% in this relatively uncompacted formation. In this thermally immature source rock, water saturation is nearly 100% and no free hydrocarbons were observed on the resistivity logs. No evidence of borehole ellipticity was observed on the three-arm caliper log, and horizontal stresses are presumed to be directionally uniform in the vicinity of this near-surface wellbore. This shallow wellbore has a temperature gradient of 1.87°F/100 ft (16.3°C/km) and is likely influenced by earth surface heating.

Texas↗
USGS1979

Progress in remote sensing as it applies to missions of Committee for Coordination of Joint Prospecting for Mineral Resources in Asian Offshore Areas

The major thrusts of investigations of the use of space data for understanding our Earth continue to focus on the land and near-shore environments. This is expectable; people live on the land, draw most of their resources from the land or near-shore areas, and in these areas environmental degradation or improvement are most clearly observable. An exception to this focus of investigation was the launch of Seasat, a satellite dedicated to marine investigations. Seasat was short lived but the data produced strongly supported the use of imaging radar for land investigation, and, although studies are incomplete, suggest eventual benefits for the navigator, searchers for marine resources, and mariners--provided that the data and/or interpretations can be available to the marine users shortly after collection. In this regard, the positive steps now being taken in Southeast Asia to establish reception, processing, and interpretation centers are a major development.

Open-File Report↗
USGS1998

Deep earthquakes beneath the Fiji Basin, SW Pacific: Earth's most intense deep seismicity in stagnant slabs

Previous work has suggested that many of the deep earthquakes beneath the Fiji Basin occur in slab material that has been detached and foundered to the bottom of the transition zone or has been laid down by trench migration in a similar recumbent position. Since nowhere else in the Earth do so many earthquakes occur in slabs stagnated in the transition zone, these earthquakes merit closer study. Accordingly, we have assembled from historical and modern data a comprehensive catalogue of the relocated hypocenters and focal mechanisms of well-located deep events in the geographic area between the bottoms of the main Vanuatu and Tonga Wadati-Benioff zones. Two regions of deep seismogenesis are recognized there: (i) 163 deep shocks have occurred north of 15??S in the Vityaz Group from 1949 to 1996. These seismological observations and the absence of other features characteristic of active subduction suggest that the Vityaz group represents deep failure in a detached slab that has foundered to a horizontal orientation near the bottom of the transition zone. (ii) Another group of nearly 50 'outboard' deep shocks occur between about 450 and 660 km depth, west of the complexly buckled and offset western edge of the Tonga Wadati-Benioff zone. Their geometry is in the form of two or possibly three small-circle arcs that roughly parallel the inferred motion of Tonga trench migration. Earthquakes in the southernmost of these arcs occur in a recumbent high-seismic-wavespeed slab anomaly that connects both to the main inclined Tonga anomaly to the east and a lower mantle anomaly to the west [Van der Hilst, R., 1995. Complex morphology of subducted lithosphere in the mantle beneath the Tonga trench. Nature, Vol. 374, pp. 154-157.]. Both groups show complexity in their focal mechanisms. The major question raised by these observations is the cause of this apparent temporary arrest in the descent of the Tonga slab into the lower mantle. We approach these questions by considering the effects of buoyant metastable peridotite in cold slab material that was detached and rapidly foundered, or was buckled, segmented and laid out in the transition zone.

Physics of the Earth and Planetary Interiors↗
USGS2014

Seismological and geodetic constraints on the 2011 M w 5.3 Trinidad, Colorado earthquake and induced deformation in the Raton Basin

The Raton Basin of southern Colorado and northern New Mexico is an actively produced hydrocarbon basin that has experienced increased seismicity since 2001, including the August 2011 M w 5.3 Trinidad normal faulting event. Following the 2011 earthquake, regional seismic observations were used to relocate 21 events, including the 2011 main shock, two foreshocks, and 13 aftershocks. Additionally, interferometric synthetic aperture radar (InSAR) observations of both the 2011 event and preevent basin deformation place constraint on the spatial kinematics of the 2011 event and localized basin subsidence due to ground water or gas withdrawal. We find that the 2011 earthquake ruptured an 8–10 km long segment of a normal fault at depths of 1.5–6.0 km within the crystalline Precambrian basement underlying the Raton Basin sedimentary rocks. The earthquake also nucleated within the crystalline basement in the vicinity of an active wastewater disposal site. The ensuing aftershock sequence demonstrated statistical properties expected for intraplate earthquakes, though the length of the 2011 earthquake is unexpectedly long for an M w 5.3 event, suggesting that wastewater disposal may have triggered a low stress drop, otherwise natural earthquake. Additionally, preevent and postevent seismicity in the Raton Basin spatially correlates to regions of subsidence observed in InSAR time series analysis. While these observations cannot discern a causal link between hydrocarbon production and seismicity, they constrain spatial relationships between active basin deformation and geological and anthropogenic features. Furthermore, the InSAR observations highlight the utility of space-based geodetic observations for monitoring and assessing anthropogenically induced and triggered deformation.

Journal of Geophysical Research B: Solid Earth↗
USGS2020

Seismic and geodetic progression of the 2018 summit caldera collapse of Kīlauea Volcano

The 2018 eruption of Kīlauea volcano, Hawaiʻi, resulted in a major collapse of the summit caldera along with an effusive eruption in the lower East Rift Zone. The caldera collapse comprised 62 highly similar collapse cycles of strong ground deformation and earthquake swarms that ended with a magnitude 5 collapse event and one partial cycle that did not end with a collapse event. We analyzed geodetic and seismic data to better understand how the caldera collapse progressed over 3 months of activity, focusing on the cyclical activity. We identified 3 main phases of collapse: initial ring-fault activation and small explosions (Phase 1), an eastward shift in activity and freeing of the central piston (Phase 2), and a recoupling of the piston to the reservoir followed by relatively steady behavior until the eruption’s end (Phase 3). Additionally, we observed geodetic evidence of tangential motion from the localization of the main ring fault (Phase 2) and the formation of a major peripheral ring fault on the eastern side of the collapse caldera during Phase 3. Both geodetic and seismic parameters suggest that the collapse may have had an eastward-component of motion after the ring fault system had formed. The cyclical seismic and geodetic parameters show no obvious signs that the collapse was coming to an end, with the only notable change being a significant increase in the ratio of cyclical displacement to co-collapse displacement observed during the last complete cycle on GNSS stations outside the caldera region.

Hawaii↗
USGS2000

Seismovolcanic signals at Deception Island volcano, Antarctica: Wave field analysis and source modeling

The seismovolcanic signals associated with the volcanic activity of Deception Island (Antarctica), recorded during three Antarctic summers (1994–1995, 1995–1996 and 1996–1997), are analyzed using a dense small-aperture (500 m) seismic array. The visual and spectral classification of the seismic events shows the existence of long-period and hybrid isolated seismic events, and of low-frequency, quasi-monochromatic and spasmodic continuous tremors. All spectra have the highest amplitudes in the frequency band between 1 and 4 Hz, while hybrids and spasmodic tremors have also significant amplitudes in the high-frequency band (4–10 Hz). The array analysis indicates that almost all the well-correlated low-frequency signals share similar array parameters (slowness and back azimuth) and have the same source area, close to the array site. The polarization analysis shows that phases at high-frequency are mostly composed of P waves, and those phases dominated by low frequencies can be interpreted as surface waves. No clear shear waves are evidenced. From the energy evaluation, we have found that the reduced displacement values for surface and body waves are confined in a narrow interval. Volcano-tectonic seismicity is located close to the array, at a depth shallower than 1 km. The wave-field properties of the seismovolcanic signals allow us to assume a unique source model, a shallow resonating fluid-filled crack system at a depth of some hundreds of meters. All of the seismic activity is interpreted as the response of a reasonably stable stationary geothermal process. The differences observed in the back azimuth between low and high frequencies are a near-field effect. A few episodes of the degassification process in an open conduit were observed and modeled with a simple organ pipe.

Journal of Geophysical Research: Solid Earth↗
USGS2011

A model for seasonal changes in GPS positions and seismic wave speeds due to thermoelastic and hydrologic variations

It is known that GPS time series contain a seasonal variation that is not due to tectonic motions, and it has recently been shown that crustal seismic velocities may also vary seasonally. In order to explain these changes, a number of hypotheses have been given, among which thermoelastic and hydrology-induced stresses and strains are leading candidates. Unfortunately, though, since a general framework does not exist for understanding such seasonal variations, it is currently not possible to quickly evaluate the plausibility of these hypotheses. To fill this gap in the literature, I generalize a two-dimensional thermoelastic strain model to provide an analytic solution for the displacements and wave speed changes due to either thermoelastic stresses or hydrologic loading, which consists of poroelastic stresses and purely elastic stresses. The thermoelastic model assumes a periodic surface temperature, and the hydrologic models similarly assume a periodic near-surface water load. Since all three models are two-dimensional and periodic, they are expected to only approximate any realistic scenario; but the models nonetheless provide a quantitative framework for estimating the effects of thermoelastic and hydrologic variations. Quantitative comparison between the models and observations is further complicated by the large uncertainty in some of the relevant parameters. Despite this uncertainty, though, I find that maximum realistic thermoelastic effects are unlikely to explain a large fraction of the observed annual variation in a typical GPS displacement time series or of the observed annual variations in seismic wave speeds in southern California. Hydrologic loading, on the other hand, may be able to explain a larger fraction of both the annual variations in displacements and seismic wave speeds. Neither model is likely to explain all of the seismic wave speed variations inferred from observations. However, more definitive conclusions cannot be made until the model parameters are better constrained. Copyright ?? 2011 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS2008

Radiometric calibration stability and inter-calibration of solar-band instruments in orbit using the moon

With the increased emphasis on monitoring the Earth's climate from space, more stringent calibration requirements are being placed on the data products from remote sensing satellite instruments. Among these are stability over decade-length time scales and consistency across sensors and platforms. For radiometer instruments in the solar reflectance wavelength range (visible to shortwave infrared), maintaining calibration on orbit is difficult due to the lack of absolute radiometric standards suitable for flight use. The Moon presents a luminous source that can be viewed by all instruments in Earth orbit. Considered as a solar diffuser, the lunar surface is exceedingly stable. The chief difficulty with using the Moon is the strong variations in the Moon's brightness with illumination and viewing geometry. This mandates the use of a photometric model to compare lunar observations, either over time by the same instrument or between instruments. The U.S. Geological Survey in Flagstaff, Arizona, under NASA sponsorship, has developed a model for the lunar spectral irradiance that explicitly accounts for the effects of phase, the lunar librations, and the lunar surface reflectance properties. The model predicts variations in the Moon's brightness with precision ???1% over a continuous phase range from eclipse to the quarter lunar phases. Given a time series of Moon observations taken by an instrument, the geometric prediction capability of the lunar irradiance model enables sensor calibration stability with sub-percent per year precision. Cross-calibration of instruments with similar passbands can be achieved with precision comparable to the model precision. Although the Moon observations used for intercomparison can be widely separated in phase angle and/or time, SeaWiFS and MODIS have acquired lunar views closely spaced in time. These data provide an example to assess inter-calibration biases between these two instruments.

Conference Paper↗
USGS2015

Geological processes and orchid biogeography with applications to southeast central America

This contribution owes its origins to a paper presentation by Dr. Calloway H. Dodson at the Second International Conference on Neotropical Orchidology held in San José, Costa Rica in May of2003 (Dodson 2003). Dr. Dodson outlined some ofthe reasons to suspect that regional geological fac-tors may play important roles in orchid speciation and biogeography and gave examples from the northwestern South America. He also suggested that evolutionary change in orchid might occur over fairly short time periods, perhaps even as short as decades, centuries or millennia (Dodson 2003, SHK lecture notes). These ideas stimulated the author, a professional earth scientist, to begin thinking about how these exciting ideas could begin to be tested in Costa Rica neighboring and Central American countries, an area that has drawn him to return frequently over the last decade. The present contribution is a proposal for integrating geological observations, such as the chronology of arc volcanic activity in Nicaragua,Costa Rica, and Panama, in hypothesis forming and testing of the geographic distribution of orchids (and possibly other biota). I initially focus on comparisons between orchid inventories on the windward slopes of mountainous regions (elevation > 1000 m)with high rainfall (> 1-2 m) in tropical regions, the so-called tropical cloud forests. These regions represent the tropical pre-montane rain forestto lower montane tropical rain forest life zones of Holdridge(1967) and the montane vegetation zone applied to Costa Rica and Panama by Dressler (1993). An important message of this paper is that such tropical mountainous regions are not necessarily static, but may change in elevation over geologic time due to active tectonic deformation and uplift and that the presence of active volcanism in a mountain range may also introduce additional chemical factors, such as volcanic gases, acid rain, and volcanic soils, and also physical factors, such as interruption of gene flow by explosive eruptions and coverage by their air fall products such as ash (tephra), lava flows, and lahars (volcanic mudflows). Thus over a given geological time interval, forests may be slowly increasing in elevation by tectonic uplift or by the accumulation of volcanic products such as steep-sided strato volcanoes (built from both lavas and tephra), or by down-slope accumulations of lava flows or lahars. Mountains may also lose elevation by erosion or by tectonic subsidence. As we shall see, tropical Central America shows an extraordinarily high level of tectonic and volcanic history that has changed its geography and, by implication, climate, life zones,and likely orchid distribution. My working hypo thesis put forward for testing is that orchid adaptations to these changes may have led to the development of new species and endemism in this region.

Lankesteriana↗
USGS2012

Hydrogeology and water quality of the Floridan aquifer system and effect of Lower Floridan aquifer pumping on the Upper Floridan aquifer, Pooler, Chatham County, Georgia, 2011–2012

Two test wells were completed in Pooler, Georgia, in 2011 to investigate the potential of using the Lower Floridan aquifer as a source of water for municipal use. One well was completed in the Lower Floridan aquifer at a depth of 1,120 feet (ft) below land surface; the other well was completed in the Upper Floridan aquifer at a depth of 486 ft below land surface. At the Pooler test site, the U.S. Geological Survey performed flowmeter surveys, packer-isolated slug tests within the Lower Floridan confining unit, slug tests of the entire Floridan aquifer system, and aquifer tests of the Upper and Lower Floridan aquifers. Drill cuttings, geophysical logs, and borehole flowmeter surveys indicate that the Upper Floridan aquifer extends 333 –515 ft below land surface, the Lower Floridan confining unit extends 515–702 ft below land surface, and the Lower Floridan aquifer extends 702–1,040 ft below land surface. Flowmeter surveys indicate that the Upper Floridan aquifer contains two water-bearing zones at depth intervals of 339 –350 and 375–515 ft; the Lower Floridan confining unit contains one zone at a depth interval of 550–620 ft; and the Lower Floridan aquifer contains five zones at depth intervals of 702–745, 745–925, 925–984, 984–1,015, and 1,015–1,040 ft. Flowmeter testing of the test borehole open to the entire Floridan aquifer system indicated that the Upper Floridan aquifer contributed 92.4 percent of the total flow rate of 708 gallons per minute; the Lower Floridan confining unit contributed 3.0 percent; and the Lower Floridan aquifer contributed 4.6 percent. Horizontal hydraulic conductivity of the Lower Floridan confining unit derived from slug tests within three packer-isolated intervals ranged from 0.5 to 10 feet per day (ft/d). Aquifer-test analyses yielded values of transmissivity for the Upper Floridan aquifer, Lower Floridan confining unit, and the Lower Floridan aquifer of 46,000, 700, and 4,000 feet squared per day (ft 2 /d), respectively. Horizontal hydraulic conductivity of 4 ft/d for the Lower Floridan confining unit, derived from aquifer-test analyses, is near the midrange for values derived from packer-isolated slug tests. The transmissivity of the entire Floridan aquifer system derived from aquifer-test analyses totals about 51,000 ft 2 /d, similar to the value of 58,000 ft 2 /d derived from open slug tests on the entire Floridan aquifer system. Water-level data for each aquifer test were filtered for external influences such as barometric pressure, earth-tide effects, and long-term trends to enable detection of small (less than 1 foot) water-level responses to aquifer-test pumping. During the 72-hour aquifer test of pumping the Lower Floridan aquifer, a drawdown response of 51.7 ft was observed in the Lower Floridan pumped well and a drawdown response of 0.9 foot was observed in the Upper Floridan observation well located 85 ft from the pumped well.

Georgia↗
USGS1988

Seismic design and engineering research at the U.S. Geological Survey

The Engineering Seismology Element of the USGS Earthquake Hazards Reduction Program is responsible for the coordination and operation of the National Strong Motion Network to collect, process, and disseminate earthquake strong-motion data; and, the development of improved methodologies to estimate and predict earthquake ground motion. Instrumental observations of strong ground shaking induced by damaging earthquakes and the corresponding response of man-made structures provide the basis for estimating the severity of shaking from future earthquakes, for earthquake-resistant design, and for understanding the physics of seismologic failure in the Earth's crust.

Earthquakes & Volcanoes (USGS)↗
USGS2016

Terrestrial nitrogen cycling in Earth system models revisited

Understanding the degree to which nitrogen (N) availability limits land carbon (C) uptake under global environmental change represents an unresolved challenge. First-generation ‘C-only’vegetation models, lacking explicit representations of N cycling,projected a substantial and increasing land C sink under rising atmospheric CO 2 concentrations. This prediction was questioned for not taking into account the potentially limiting effect of N availability, which is necessary for plant growth (Hungate et al.,2003). More recent global models include coupled C and N cycles in land ecosystems (C–N models) and are widely assumed to be more realistic. However, inclusion of more processes has not consistently improved their performance in capturing observed responses of the global C cycle (e.g. Wenzel et al., 2014). With the advent of a new generation of global models, including coupled C, N, and phosphorus (P) cycling, model complexity is sure to increase; but model reliability may not, unless greater attention is paid to the correspondence of model process representations ande mpirical evidence. It was in this context that the ‘Nitrogen Cycle Workshop’ at Dartington Hall, Devon, UK was held on 1–5 February 2016. Organized by I. Colin Prentice and Benjamin D. Stocker (Imperial College London, UK), the workshop was funded by the European Research Council,project ‘Earth system Model Bias Reduction and assessing Abrupt Climate change’ (EMBRACE). We gathered empirical ecologists and ecosystem modellers to identify key uncertainties in terrestrial C–N cycling, and to discuss processes that are missing or poorly represented in current models.

New Phytologist↗
USGS2020

The pervasive and multifaceted influence of biocrusts on water in the world’s drylands

The capture and use of water are critically important in drylands, which collectively constitute Earth's largest biome. Drylands will likely experience lower and more unreliable rainfall as climatic conditions change over the next century. Dryland soils support a rich community of microphytic organisms (biocrusts), which are critically important because they regulate the delivery and retention of water. Yet despite their hydrological significance, a global synthesis of their effects on hydrology is lacking. We synthesized 2,997 observations from 109 publications to explore how biocrusts affected five hydrological processes (times to ponding and runoff, early [sorptivity] and final [infiltration] stages of water flow into soil, and the rate or volume of runoff) and two hydrological outcomes (moisture storage, sediment production). We found that increasing biocrust cover reduced the time for water to pond on the surface (−40%) and commence runoff (−33%), and reduced infiltration (−34%) and sediment production (−68%). Greater biocrust cover had no significant effect on sorptivity or runoff rate/amount, but increased moisture storage (+14%). Infiltration declined most (−56%) at fine scales, and moisture storage was greatest (+36%) at large scales. Effects of biocrust type (cyanobacteria, lichen, moss, mixed), soil texture (sand, loam, clay), and climatic zone (arid, semiarid, dry subhumid) were nuanced. Our synthesis provides novel insights into the magnitude, processes, and contexts of biocrust effects in drylands. This information is critical to improve our capacity to manage dwindling dryland water supplies as Earth becomes hotter and drier.

Global Change Biology↗