USGS Science⌕ Search

SEARCH · USGS Science

Results for “Modern Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53Linked to original sources
USGS2018

Controls on submarine canyon head evolution: Monterey Canyon, offshore central California

The Monterey submarine canyon, incised across the continental shelf in Monterey Bay, California, provides a record of the link between onshore tectonism, fluvial transport, and deep-marine deposition. High-resolution seismic-reflection imaging in Monterey Bay reveals an extensive paleocanyon unit buried below the seafloor of the continental shelf around Monterey and Soquel canyon heads. Paleocanyons shifted position through numerous phases of cut-and-fill in response to Salinas, Pajaro, and San Lorenzo river extensions and avulsions across the continental shelf during high-frequency Pleistocene sea-level and climatic variations. Five seismic facies within the Monterey paleocanyon unit and below the modern canyon are defined to interpret canyon evolution during the Pleistocene. Repeated sea-level oscillations appear to have switched the main fairway(s) of sediment transport. Large-scale erosion and fill occurred in marine environments. Paleocanyon fill is characterized by paleo-axial channel deposits and mass transport deposits, followed by canyon head abandonment and marine sedimentation. The upper portion of the paleocanyon unit contains relatively small channels that were likely incised by erosion in the paleo-Salinas and Pajaro rivers and filled with a mix of nonmarine and marine deposits. Shifting position of submarine canyons over time is characteristic of Monterey Bay, east of the Monterey Bay Fault Zone, and is likely unidentified in other submarine canyon head regions that lack dense high-resolution seismic-reflection subbottom images. We show that canyon heads can be areas of sediment accumulation linked to sea-level oscillations, providing new insights into submarine canyon evolution and sequence stratigraphy.

California↗
USGS2011

Neotectonic inversion of the Hindu Kush-Pamir mountain region

The Hindu Kush-Pamir region of southern Asia is one of Earth's most rapidly deforming regions and it is poorly understood. This study develops a kinematic model based on active faulting in this part of the Trans-Himalayan orogenic belt. Previous studies have described north-verging thrust faults and some strike-slip faults, reflected in the northward-convex geomorphologic and structural grain of the Pamir Mountains. However, this structural analysis suggests that contemporary tectonics are changing the style of deformation from north-verging thrusts formed during the initial contraction of the Himalayan orogeny to south-verging thrusts and a series of northwest-trending, dextral strike-slip faults in the modern transpressional regime. These northwest-trending fault zones are linked to the major right-lateral Karakoram fault, located to the east, as synthetic, conjugate shears that form a right-stepping en echelon pattern. Northwest-trending lineaments with dextral displacements extend continuously westward across the Hindu Kush-Pamir region indicating a pattern of systematic shearing of multiple blocks to the northwest as the deformation effects from Indian plate collision expands to the north-northwest. Locally, east-northeast- and northwest-trending faults display sinistral and dextral displacement, respectively, yielding conjugate shear pairs developed in a northwest-southeast compressional stress field. Geodetic measurements and focal mechanisms from historical seismicity support these surficial, tectono-morphic observations. The conjugate shear pairs may be structurally linked subsidiary faults and co-seismically slip during single large magnitude (> M7) earthquakes that occur on major south-verging thrust faults. This kinematic model provides a potential context for prehistoric, historic, and future patterns of faulting and earthquakes.

Himalayan Geology↗
USGS1998

Boron-rich mud volcanoes of the Black Sea region: Modern analogues to ancient sea-floor tourmalinites associated with Sullivan-type Pb-Zn deposits?

Large submarine mud volcanoes in the abyssal part of the Black Sea south of the Crimean Peninsula are similar in many respects to synsedimentary mud volcanoes in the Mesoproterozoic Belt-Purcell basin. One of the Belt-Purcell mud volcanoes directly underlies the giant Sullivan Pb-Zn-Ag deposit in southeastern British Columbia. Footwall rocks to the Sullivan deposit comprise variably tourmalinized siltstone, conglomerate, and related fragmental rock; local thin pyrrhotite-rich and spessartine-quartz beds are interpreted as Fe and Fe-Mn exhalites, respectively. Analogous Fe- and Mn-rich sediments occur near the abyssal Black Sea mud volcanoes. Massive pyrite crusts and associated carbonate chimneys discovered in relatively shallow waters (∼200 m depth) west of the Crimean Peninsula indicate an active sea-floor–hydrothermal system. Subaerial mud volcanoes on the Kerch and Taman Peninsulas (∼100 km north of the abyssal mud volcanoes) contain saline thermal waters that locally have very high B contents (to 915 mg/L). These data suggest that tourmalinites might be forming in or near submarine Black Sea mud volcanoes, where potential may also exist for Sullivan-type Pb-Zn mineralization.

Geology↗
USGS1990

Tectonic history of the northern Nabitah fault zone, Arabian Shield, Kingdom of Saudi Arabia

Geologic mapping combined with structural, petrographic, and geochemical investigations were used to evaluate the motion and paleogeographic setting of the northern Nabitah fault zone. The orientation and asymmetry of small structures in three areas along the fault zone suggest that motion was primarily left-lateral strike slip. East of the fault zone, the Afif terrane is underlain by a north-trending granodioritic batholith that is interpreted to be the plutonic core of a volcanic arc (herein named the Nabitah arc) whose activity was coincident with Nabitah faulting. Available geochronologic data indicate that the Nabitah fault zone and arc were active at 710 Ma and that activity may have continued until about 670 Ma. Relicts of a prebatholithic island-arc ophiolite crop out as roof pendants and septa east of the fault zone. Analysis of petrologic, geochemical, and geochronologic data suggests that these rocks may have formed a terrane older than 800 Ma that was continuous from the Nabitah fault zone to the Nuqrah belt. These rocks may have been moved northward by Nabitah faulting from an original position opposite the Asir terrane. Scale-model comparisons with Recent and Phanerozoic volcanic arcs suggest that the Nabitah fault zone may have been a transform fault that developed as a result of sinistral oblique subduction east of the Al Amar fault. According to this model, the Abt schist would have formed in an accretionary prism and the Murdama group would have been deposited in a fore-arc basin. Analogs for thrust faults in the northern Arabian Shield are found in modern arcs developed behind oblique subduction zones. The orientations of the Najd faults may reflect initial formation as normal faults in the fore-arc region of such an arc system. Based on the presence of similar lithologies, similar structure, and analogous tectonic setting, the Mother Lode District in California is reviewed as a model for gold occurrences near the Nabitah fault zone in this report.

Open-File Report↗
USGS2002

Seismic-reflection profiles of the central part of the Clarendon-Linden fault system of western New York in relation to regional seismicity

Geological and geophysical research in upstate New York, with few exceptions, has not definitively associated seismicity with specific Proterozoic basement or Paleozoic bedrock structures. The central part of the Clarendon-Linden fault system (CLFS) between Batavia and Dale, NY is one of those exceptions where seismicity has been studied and has been spatially associated with structure. The CLFS is either a complex system of long faults with associated shorter branches and parallel segments, or a region of many short faults aligned north-south from the Lake Ontario shore southward to Allegany County, NY. Interpretation of 38 km of Vibroseis and approximately 56 km of conventional seismic-reflection data along 13 lines suggests that the CLFS is a broad zone of small faults with small displacements in the lower Paleozoic bedrock section that is at least 77 km long and 7-17 km wide and spatially coincident with a northtrending geophysical (combined aeromagnetic and gravity) lineament within the basement. The relative offset across the faults of the system is more than 91 m near Attica, NY. The CLFS is the expression of tectonic crustal adjustments within the Paleozoic rock above the boundary of two basement megablocks of differing petrologic provinces and differing earthquake characteristics that forms the eastern side of the Elzevir-Frontenac boundary zone. Deep seismic-reflection profiles display concave-eastward listric faults that probably merge at depth near the mid-crustal boundary layer. An interpretive vertical section provides the setting for refined definitions of the CLFS, its extensions at depth and its relation to seismicity. Most modern seismicity in western New York and the Niagara Peninsula of Ontario occurs in apparent patterns of randomly dispersed activity. The sole exception is a line of seven epicenters of small earthquakes that trend east from Attica, NY into the Rochester basement megablock. Earthquakes may be triggered at the intersections of north- and east-trending brittle faults within the Niagara basement megablock. Current interpretations of the mechanisms for earthquake generation in western New York and the Niagara Peninsula of Ontario require conservative estimates of seismic hazards that assume that an earthquake the size of the 1929 Attica, NY, event (Mb = 5.2) or larger could occur anywhere in the Eastern Great Lakes Basin (EGLB). The broad zone of small-displacement faults that marks the CLFS in the lower Paleozoic sedimentary section and the uppermost basement may not provide the structural environment for generation of earthquakes in western New York. If this interpretation is correct, most seismicity is generated within the Niagara basement megablock beneath or west of the CLFS. Consequently, we may have to look to the deeper tectonic regime of basement megablocks to understand the distribution of modern seismicity in the EGLB. ?? 2002 Elsevier Science B.V. All rights reserved.

Tectonophysics↗
USGS1953

Geology of the Knife River area, North Dakota

The Knife River area, consisting of six 15-minute quadrangles, includes the lower half of the Knife River valley in west-central North Dakota. The area, in the center of the Williston Basin, is underlain by the Tongue River member of the Fort Union formation (Paleocene) and the Golden Valley formation (Eocene). The Tongue River includes beds equivalent to the Sentinel Butte shale; the Golden Valley formation, which receives its first detailed description in this report, consists of two members, a lower member of gray to white sandy kaolin clay and an upper member of cross-bedded micaceous sandstone. Pro-Tongue River rocks that crop out in southwestern North Dakota include the Ludlow member of the Fort Union formation, the Cannonball marine formation (Paleocene) and the Hell Creek, Fox Hills, and Pierre formations, all upper Cretaceous. Post-Golden Valley rocks include the White River formation (Oligocene) and gravels on an old planation surface that may be Miocene or Pliocent. Surficial deposits include glacial and fluvial deposits of Pleistocene age and alluvium, dune sand, residual silica, and landslide blocks of Recent age. Three ages of glacial deposits can be differentiated, largely on the basis of three fills, separated by unconformities, in the Knife River valley. All three are of Wisconsin age and probably represent the Iowan, Tazewell, and Mankato substages. Deposits of the Cary substage have not been identified either in the Knife River area or elsewhere in southern North Dakota. Iowan glacial deposits form the outermost drift border in North Dakota. Southwest of this border are a few scattered granite boulders that are residual from the erosion of either the White River formation or a pre-Wisconsin till. The Tazewell drift border cannot be followed in southern North Dakota. The Mankato drift border can be traced in a general way from the South Dakota State line northwest across the Missouri River and through the middle of the Knife River area. The major land forms of southwestern North Dakota are: (1) high buttes that stand above (2) a gravel-capped planation surface and (3) a gently-rolling upland; below the upland surface are (4) remnants of a broad valley stage of erosion into which (5) modern valleys have been cut. The broad valley profiles of many streams continue east across the Missouri River trench and are part of a former drainage system that flowed into Hudson Bay. Crossing the divides are (6) large trenches, formed when the former northeast-flowing streams were dammed by the glacier and diverted to the southeast. The largest diversion valley is occupied by the Missouri River; another diversion system, now largely abandoned, extends from the Killdeer Mountains southwest to the mouth of Porcupine Creek in Sioux County. By analogy with South Dakota, most of the large diversion valleys are thought to have been cut in Illinoian time. Numerous diversion valleys of Illinoian to late Wisconsin age cut across the divides. Other Pleistocene land forms include ground and moraines, kames, and terraces. Land forms of Recent age include dunes, alluvial terraces, floodplains, and several types of landslide blocks. One type of landslide, called rockslide slump, has not previously been described. Drainage is well adjusted to the structure, most of the streams flowing down the axes of small synclines. The bedrock formations have been gently folded into small domes and synclines that interrupt a gentle northward regional dip into the Williston Basin. Three episodes of deformation affected southwestern North Dakota in Tertiary time: (1) intra-Paleocene, involving warping and minor faulting; (2) post-Eocene, involving uplift and tilting; (2) Oligocene, involving uplift and gentle folding. Mineral resources include ceramic clay, sand and gravel and lignite coal. The Knife River area is the largest lignite-producing district in the United States.

North Dakota↗
USGS2025

U.S. Geological Survey Pollinator Science Strategy, 2025–35—A Review and Look Forward

This “U.S. Geological Survey Pollinator Science Strategy, 2025–35—A Review and Look Forward” (“Pollinator Science Strategy”) describes the science vision of the U.S. Geological Survey (USGS) to support management, conservation, and policy decisions on animal pollinators and their habitats. As the science arm of the Department of the Interior, the USGS has a primary role in providing scientific information to natural resource managers and policymakers across the United States. This “Pollinator Science Strategy” was drafted by a team of USGS pollinator researchers and was further developed through feedback from Federal, State, Tribal, nongovernmental organizations, and industry partners. This “Pollinator Science Strategy” highlights the USGS’s role in the research to promote healthy pollinator populations and address partner information gaps so they can make more informed management decisions. By outlining the importance of USGS science in addressing the information needs of other agencies, organizations, and the public, the “Pollinator Science Strategy” reaffirms the USGS’s commitment to pollinator research and showcases our research priorities for 2025–35. With more than 300 research centers nationally, the USGS is equipped to address pollinator science across scales of complexity and geographic range. USGS pollinator science is organized according to the following five thematic areas: Assessing species ecology, distributions, and natural history requirements. Tracking species status and trends. Understanding species threats and stressors. Informing restoration and management actions. Developing novel methods for improving pollinator research, monitoring, and population outcomes that can benefit our Nation. Our pollinator information products and associated data are made widely available to the public to ensure scientific transparency and accessibility. This “Pollinator Science Strategy” concludes with several research goals that the USGS will work towards from 2025 to 2035, representing our vision for USGS science. These research goals include synthesizing and modernizing the latest information on pollinator threats, developing research that assists managers with habitat design and restoration, providing training to partners on native bee identification and monitoring design, and developing new technologies for assessing the status and trends of our nation’s pollinators.

Circular↗
USGS2023

Historical changes to channel planform and bed elevations downstream from dams along Fall Creek and Middle Fork Willamette River, Oregon, 1926–2016

Operation of large, multipurpose dams within the Middle Fork Willamette River Basin, Oregon, including the Fall Creek sub-basin, have disrupted natural streamflow and sediment transport regimes and fish passage along the river corridors. Documenting channel morphology, including channel planform, landforms, vegetation cover, and river channel elevations at multiple points in time spanning the 20th and early 21st centuries, is useful for characterizing net changes occurring in response to construction and operation of these dams. The U.S. Geological Survey assessed historical channel changes that occurred within the past century in response to the construction and operation of flood-control dams by evaluating planimetric datasets (from 1926 plan and profile surveys and 1936 and 2016 aerial photographs) and elevation datasets (from 1926 plan and profile surveys and 2015 light detection and ranging [lidar]). This study specifically focuses on the lower 27.3 kilometers (km) of the Middle Fork Willamette River and the lower 11.5 km of Fall Creek, or the reaches downstream from the U.S. Army Corps of Engineers Dexter Dam and Fall Creek Dam, to the confluence with Coast Fork Willamette River. Altogether, compilation and evaluation of datasets for Fall Creek and the Middle Fork Willamette River downstream from the dams provide a foundation for understanding: channel morphology and patterns of geomorphic stability prior to dam construction in 1926 and 1936; channel morphology and patterns of lateral and vertical stability of the early 21st century that reflect present-day (post-dam) streamflow and sediment regimes as of 2015–16; and geomorphic transformations of the river corridors in the decades following dam construction, including changes in planform and bed elevation (determined from water-surface elevations). Findings from this study can be used to provide historical and geomorphic context for geomorphic responses to deep reservoir drawdowns on Fall Creek Lake that mobilize reservoir sediment downstream and informing other restoration and river-management activities; this report summarizes one component of a larger research effort to document the magnitude and spatial distribution of geomorphic responses to sediment releases from draining Fall Creek Lake. As of 2016, the modern Fall Creek flows through a narrow, semi-alluvial channel that efficiently conveys water and sediment at typical streamflows downstream from Fall Creek Dam. This channel planform, including the positions and distributions of bars and secondary water features (side channels, alcoves, and ponds), generally reflects pre-dam conditions in 1936, suggesting relatively modest morphological adjustments resulted from reductions in sediment supply and alterations to peak streamflow after dam construction. The most substantial morphologic change detected over this period was a reduction in unvegetated gravel bars. As of 2016, the modern Middle Fork Willamette River is a large, gravel-bed river that, despite substantial transformations in channel morphology and reduction in lateral dynamism following the construction of multiple upstream dams, remains a dominantly alluvial river. Prior to dam construction in 1926 and 1936, the reaches of the Middle Fork Willamette River downstream from Dexter Dam were laterally active with multi-thread and single-thread channels flanked by large, shifting gravel bars. Since streamflow regulation and other channel modifications in the mid-20th century, these reaches have become less laterally active and encompass a narrower floodplain corridor as abundant former gravel bars were converted to low-elevation floodplains colonized by young, dense forests. The Middle Fork Willamette River downstream from Dexter Dam has remained mostly vertically stable between 1926 and 2015, although localized segments possibly decreased in elevation as much as 2.3 meters.

Oregon↗
USGS2005

Mercury- and silver-rich ferromanganese oxides, southern California Borderland: Deposit model and environmental implications

Mercury- and silver-enriched ferromanganese oxide crusts were recovered at water depths of 1,750 tol,300 m from La Victoria knoll, located about 72 km off the coast of northern Baja California. No other ferromanganese precipitate found so far in the modern ocean basins is similarly enriched in Hg and Ag. The precipitates consist of submetallic gray, brecciated, Mn oxide layers overlain by brown earthy, laminated Fe-Mn oxide crusts. Both oxide types are rich in Hg (to 10 ppm) and Ag (to 5.5 ppm). The Mn-rich layers are composed of ??MnO2, with lesser amounts of 10A?? and 7A?? manganates, whereas the Mn phase in the Fe-Mn crusts is solely ??MnO2. The Fe phase in both layers is X-ray amorphous. Established criteria for distinguishing hydrothermal versus hydrogenetic crusts indicate that the Mn-rich layers are predominantly of low-temperature hydrothermal origin, whereas the Fe-Mn crusts are hydrogenetic, although there is some overlap in the source of chemical components in both types. La Victoria knoll is uplifted continental basement rock with basalt, andesite, and schist cropping out at the surface; the knoll may have an intrusive core. The Hg and Ag were derived from leaching by hydrothermal fluids of organic matter-rich sediments in basins adjacent to La Victoria knoll and, to a lesser extent, from continental basement rocks underlying the knoll and adjacent basins. Both rock types are notably enriched in Ag and Hg. Faults were the main fluid transport pathway, and hydrothermal circulation was driven by high heat flow associated with thinned crust. Other elements derived from the hydrothermal fluids include Tl, Cd, Cr, and Li. The main host for Hg and Ag is FeOOH, although MnO2 likely hosts some of the Ag. Minor sulfide and barite also may contain small amounts of these metals. Possible analogs in the geologic record for this deposit type are found in the Basin and Range province of the western United States and Mexico. The discovery highlights the fact that fluids circulating along faults in the offshore California borderland are transporting potentially toxic metals (Hg, Ag, Tl, As, Cd, Cr, Pb, and Ni) and depositing them on and just below the ocean floor. ?? 2005 Society of Economic Geologists, Inc.

Economic Geology↗
USGS1969

Pecos National Monument, New Mexico: Its geologic setting

The ruins of the pueblos and missions of Pecos lie on the east bank of Glorieta Creek near its junction with the Pecos River at the south end of the Sangre de Cristo Mountains in north-central New Mexico. Here the Pecos River and Glorieta Creek have formed a broad rolling valley in which the red adobe walls of the mission church stand as a striking monument to a historic past. This is beautiful country; the bright hues of red rocks are complemented by the varied greens of the junipers, pi?ons, and ponderosa pines. Northward the Sangre de Cristo Mountains stretch for miles in a blue mist toward the Truchas Peaks and forests of the Pecos Wilderness. A few miles south of the ruins the steep high escarpment of Glorieta Mesa marks, in a general way, the southern termination of the Rocky Mountain System, which here is represented by the Sangre de Cristos. The escarpment of Glorieta Mesa has been formed largely by the Pecos River and its tributaries eroding the soft sedimentary layers. The Pecos flows southward from the high mountains in the north, parallels the mesa escarpment for 15 miles, and breaches the mesa near San Jose. About 1-1/2 miles southwest of the Pecos ruins at Cerro de Escobas is the highest point on Glorieta Mesa. It is the most conspicuous feature of the local landscape and rises to an elevation of 8,212 feet - 1,270 feet above the ruins. The slope of the escarpment here is very steep, rising 6 feet in every 10 horizontal feet. Along the north side of the Glorieta Mesa escarpment is a 30-mile-long natural pass around the south end of the Sangre de Cristos that extends from Canoncito on the west to Starvation Peak on the east (fig. 1). The elevation of the pass is greater than 6,000 feet at all places, and it reaches its summit of 7,432 feet near the village of Glorieta near the west end of the pass. This pass has been used as a major travel route for more than 800 years by the Indians, Spanish, and Americans. The famous Santa Fe Trail passed through here and was superseded by the railroad, whose main-line tracks closely parallel the traces of the old wagon ruts. The modern four-lane divided highway, Interstate Highway I-25, carries high-speed automotive traffic through Glorieta Pass alongside the Santa Fe Railway. Glorieta Pass has been the locale of many important historical events, including the passage of Coronado's expedition in 1540-41; the construction of the two large mission churches at Pecos Pueblo; the capture and imprisonment of the men of the Texas Expedition in 1841; the passage of the American Army under General Kearny on its way to Santa Fe, Chihuahua, and California in 1846; and the Civil War Battle of Glorieta Pass in 1862.

New Mexico↗
USGS2005

Ground-water flow and water quality in the Upper Floridan aquifer, southwestern Albany area, Georgia, 1998-2001

During 1997, the Dougherty County Health Department sampled more than 700 wells completed in the Upper Floridan aquifer in Dougherty County, Georgia, and determined that nitrate as nitrogen (hereinafter called nitrate) concentrations were above 10 milligrams per liter (mg/L) in 12 percent of the wells. Ten mg/L is the Georgia primary drinking-water standard. The ground-water flow system is complex and poorly understood in this predominantly agricultural area. Therefore, the U.S. Geological Survey (USGS) - in cooperation with Albany Water, Gas and Light Commission - conducted a study to better define ground-water flow and water quality in the Upper Florida aquifer in the southwestern Albany area, Georgia. Ground-water levels were measured in the southwestern Albany area, Georgia, during May 1998 and March 1999 (spring), and October 1998 and September 1999 (fall). Groundwater levels measured in 75 wells open only to the Upper Floridan aquifer were used to construct potentiometric-surface maps for those four time periods. These maps show that ground water generally flows from northwest to southeast at gradients ranging from about 2 to greater than 10 feet per mile. During spring and fall 1998, ground-water levels were high and mounding of the potentiometric surface occurred in the central part of the study area, indicating a local recharge area. Water levels declined from December through February, and by March 1999 the mound in the potentiometric surface had dissipated. Of the 75 wells in the potentiometric network, 24 were selected for a water-quality network. These 24 wells and 1 spring were sampled during fall 1998 and spring 1999. Samples were analyzed for major chemical constituents, selected minor constituents, selected nutrients, and chlorofluorocarbons (CFC). Water-quality field measurements - such as water temperature, pH, specific conductance (SC), and dissolved oxygen (DO) - were taken at each well. During August 2000, a ground-water sample was collected and analyzed for selected sewage tracers. During March 2001, water samples from selected wells were analyzed for nitrogen and oxygen isotopes. Age-dating analysis using CFCs yield apparent groundwater ages that range from modern to greater than 50 years. The chemistry of ground water in the Upper Floridan aquifer varies widely throughout the southwestern Albany area, Georgia, and in general represents the chemistry commonly found in recharge areas. From fall 1998 through spring 1999, median values of pH, SC, and DO concentration were 7.6 standard units, 266 microsiemens per centimeter at 25 degrees Celsius (uS/cm), and 5.6 mg/L, respectively. The SC is highest (350 - 400 uS/cm) where mounding of the potentiometric surface exists. Specific DO concentrations indicate an area of anoxic ground water in the north-central part of the study area. Water samples indicate that ground water in the study area is dominated by calcium and bicarbonate ions, which is consistent with the limestone lithology of the aquifer. About 25 percent of the samples contained sodium and chloride at ratios similar to those in rainfall, indicating a close proximity to recharge areas. The remaining water samples, however, had sodiumchloride ratios less than 0.90, the ratio in Tift County, Georgia, rainfall samples. These low sodium-chloride ratios are consistent with chloride enrichment. Minor constituent and nutrient concentrations typically are below laboratory reporting limits; however, the maximum nitrate concentration measured during the study period was 12.2 mg/L, and the median concentration for the study period was 3.0 mg/L. Samples collected during 1999 had a higher median nitrate concentration than the 1998 samples. Regression analysis indicated that nitrate concentrations are related exponentially to chloride concentrations. Four distinct groups of ground-water-quality samples, plus four unique samples, were identified using cluster analysis. Water-quality groups I and

Georgia↗
USGS2022

Towards a holistic sulfate-water-O2 triple oxygen isotope systematics

Triple oxygen isotope (∆ 17 O with δ 18 O) signals of H 2 O and O 2 found in sulfate of oxidative weathering origin offer promising constraints on modern and ancient weathering, hydrology, atmospheric gas concentrations, and bioproductivity. However, interpretations of the sulfate-water-O 2 system rely on assuming fixed oxygen-isotope fractionations between sulfate and water, which, contrastingly, are shown to vary widely in sign and amplitude. Instead, here we anchor sulfate-water-O 2 triple oxygen isotope systematics on the homogeneous composition of atmospheric O 2 with empirical constraints and modeling. Our resulting framework does not require a priori assumptions of the O 2 - versus H 2 O‑oxygen ratio in sulfate and accounts for the signals of mass-dependent and mass-independent fractionation in the ∆ 17 O and δ 18 O of sulfate's O 2 ‑oxygen source. Within this framework, new ∆ 17 O measurements of sulfate constrain ~2.3 Ga Paleoproterozoic gross primary productivity to between 6 and 160 times present-day levels, with important implications for the biological carbon cycle response to high CO 2 concentrations prevalent on the early Earth.

Chemical Geology↗
USGS2023

Seismic source characterization in central and eastern United States

This report documents earthquake geology studies conducted in the central and eastern United States (CEUS) between 2018 and 2023. The overarching goal of the earthquake geology studies was to identify and characterize fault sources in the New Madrid seismic zone, the eastern Tennessee seismic zone, and the Charleston seismic zone. These studies primarily relied on the interpretation of high-resolution topography, morphotectonic analysis of 10-meter (m) digital elevation models, field reconnaissance, and integration with new and existing subsurface datasets. Results from each study are placed into a seismic hazard framework. The first two chapters focus on the New Madrid seismic zone, which is the most seismically active region in the CEUS, to better characterize the southern extent of the Reelfoot fault in the Obion River valley, and identify and characterize proposed faults along the margins of Crowleys Ridge in the center of the Mississippi River embayment. Crowleys Ridge is a ~320-kilometer (km) long landform that has been proposed to be formed by intermittent faulting or erosion from the Mississippi River. Legacy seismic reflection data documented Eocene, Mesozoic, and older strata offset by faults on the margins of the ridge (Van Arsdale et al., 1999). A morphotectonic analysis of the topography along Crowleys Ridge indicated southward increases in catchment hypsometric integral and slope. Neotectonic mapping on high-resolution lidar data revealed a series of subparallel linear fault and fold scarps along the margins of Crowleys Ridge. These scarps offset previously mapped fluvial and alluvial surfaces that were <56 thousand years ago (ka) (Rittenour et al., 2007). Integration of new seismic reflection and airborne electromagnetic data, legacy seismic data, with the landscape morphotectonic analysis and neotectonic mapping supports the interpretation that Crowleys Ridge is bound by faults that have been active in the late Quaternary but do not experience modern seismicity. By placing these newly characterized faults into the regional framework, the Crowleys Ridge faults can be interpreted as thrust faults associated with stepovers in the overall dextral fault system, similar to the Reelfoot fault. The results of these studies indicate that seismicity has migrated eastward during the late Quaternary, with the Reelfoot fault accommodating much of the modern-day strain. The Reelfoot fault ruptured in the 1811-1812 New Madrid earthquake sequence (Fuller, 1912) and has a record of past large earthquakes (Tuttle et al., 2002; 2019). Whereas the northern extent of the fault intersects the Mississippi River and has well-expressed surface deformation, questions remained regarding the southern limit of seismicity, deformation, and overall fault length. Analysis of <25 ka river terraces along the Obion River valley in western Tennessee revealed subtle fold scarps, with increased magnitudes of deformation on progressively older terraces, indicative of a longer record of fault movement than has been documented by paleoseismic and paleoliquefaction studies alone (e.g., Kelson et al., 1996; Gold et al., 2019; Tuttle et al., 2019). The third chapter integrates surface and subsurface data to assess the landscape record of surface deformation in the eastern Tennessee seismic zone (ETSZ), which is the second most seismically active region in the CEUS. Seismicity in the ETSZ is deep (5-26 km) and focused in the Proterozoic rock below the Paleozoic detachment. Although the region has experienced moderate (≤ Mw 4.8) seismicity in the instrumental record, the lack of a large historical earthquake and limited paleoseismic and paleoliquefaction evidence of prehistoric large ground shaking events have made seismic hazard characterization of the region challenging. Two models have emerged to predict the style and orientation of active surface deformation in the ETSZ. One suggests that surface rupturing earthquakes would exploit pre-existing faults along the regional structural grain (Cox et al., 2022). The second model advocates for primarily strike-slip motion on east-west or north-south faults, following analyses of recent seismicity (Chapman et al., 1997; Dunn and Chapman, 2006; Daniels and Peng, 2022) and the modern stress field (Levandowski et al., 2018). In our analysis, neotectonic mapping of high-resolution lidar data reveals a concentration of lineaments with east-west orientations, with some corresponding to previously mapped east-west faults that crosscut the northeast-southwest regional structural grain from the Paleozoic orogeny. A morphotectonic analysis of catchments and river segments within the same lithology indicates subtle differences that may be indicative of a longer-term tectonic uplift signal. These changes in morphotectonic metrics spatially correspond to newly mapped lineaments and previously mapped east-west trending faults. Within a regional framework, we suggest that diffuse surface deformation associated with deep seismicity is accommodated on a network on east-west faults. However, further work is needed to better understand the potential late Pleistocene fault activity of these lineaments, and we propose that the ETSZ is still best characterized as an area source in seismic hazard models. The final chapter presents preliminary work to create a geographic information system (GIS) database of recent studies analyzing surface and subsurface datasets and interpretations in the Charleston seismic zone, South Carolina. This GIS database will serve as a foundation for future work to analyze new quality level 1 (QL1; <0.5 m resolution) lidar data over the 1886 magnitude (M) 7 Charleston epicentral region to identify possible fault source sources responsible for the 1886 or other surface-rupturing events. This chapter briefly summarizes three new subsurface datasets, including seismic reflection (Pratt et al., 2022; Liberty, 2022) and seismicity data (Chapman et al., 2016), and one new surface dataset (Marple and Hurd, 2020), and their interpretations of potentially active lineaments and faults in the region.

central and eastern United States↗
USGS1998

Surficial geologic map along the Castle Mountain Fault between Houston and Hatcher Pass Road, Alaska

The surficial geology of the map area is dominated by sedimentary deposits laid down during and after the Naptowne glaciation (Karlstrom, 1964) of late Pleistocene age. During this episode, a large valley glacier flowed westward down the Matanuska Valley along the southern flank of the Talkeetna Mountains. The youngest of two documented advances has been referred to as the Elmendorf stade, which reached its maximum extent about 12,000 radiocarbon years ago (Schmoll and others, 1972; Reger and Updike, 1983). Deposits from this stade in the map area include: glacial till (Qg), lateral moraine (Qml) and kame terrace (Qk) deposits. Older episodes of glaciation have been inferred by a number of workers (e.g., Karlstrom, 1964; Reger and Updike, 1983; Reger and Updike, 1989; Schmoll and Yehle, 1986). The ridge above and north of the map area, Bald Mountain Ridge, is rounded in contrast to higher areas of the Talkeetna Mountains to the east. Therefore, within the map area older glacial deposits (Qg2) are inferred to lie above the highest Naptowne deposits. After reaching its maximum extent the valley glacier stagnated (Reger and Updike, 1983), as indicated by a crevasse-fill-ridge complex south of Houston in the map area, perched drainages along the sides of the Talkeetna Mountains, and an esker (unit Qe in the middle of the western map area). The ancient stream deposits (unit Qad) are perched on the southern flanks of the Talkeetna Mountains and were deposited by westward flowing streams as the valley glacier stagnated. These sinuous ancient drainages commonly incised up to 20 m into the underlying glacial till. Because stream flow is not as high today as when the drainages formed, the modern streams flowing within these drainages are underfit, and the ancient drainage courses are commonly filled with peat deposits (Qp). After ice of the Elmendorf stade melted, modern stream courses were established. These include the southward flowing streams on the flank of the Talkeetna Mountains as well as the west-southwestward flowing Little Susitna River. The Little Susitna River cut down through older river terrace deposits (Qat) to form the active alluvial plain (Qaa). Alluvium from the southward flowing streams (Qas) forms alluvial fans on top of, and presumably interfingering with, active alluvium along the Little Susitna River.

Alaska↗
USGS2000

Functional groups and elemental analyses of cuticular morphotypes of Cordaites principalis (Germar) Geinitz, Carboniferous Maritimes Basin, Canada

Well-preserved cuticles were isolated from Cordaites principalis (Germar) Geinitz leaf compressions, i.e., foliage from extinct gymnosperm trees Coniferophyta: Order Cordaitales. The specimens were collected from the Sydney. Stellarton and Bay St. George subbasins of the once extensive Carboniferous Maritimes Basin of Atlantic Canada. Fourier transformation of infrared spectra (FTIR) and elemental analyses indicate that the ca. 300-306-million-year-old fossil cuticles share many of the functional groups observed in modern cuticles. The similarities of the functional groups in each of the three cuticular morphotypes studied support the inclusion into a single cordaite-leaf taxon, i.e., C. principalis (Germar), confirming previous morphological investigations. Vitrinite reflectance measurements on coal seams in close proximity to the fossil-bearing sediments reveal that the Bay St. George sample site has the lowest thermal maturity, whereas the sites in Sydney and Stellarton are more mature. IR absorption and elemental analyses of the cordaite compressions corroborate this trend, which suggests that the coalified mesophyll in the leaves follows a maturation path similar to that of vitrinite. Comparison of functional groups of the cordaite cuticles with those from certain pteridosperms previously studied from the Sydney Subbasin shows that in the cordaite cuticles highly conjugated C-O (1632 cm-1) bands dominate over carbonyl stretch that characterizes the pteridosperm cuticles. The differences demonstrate the potential of chemotaxonomy as a valuable tool to assist distinguishing between Carboniferous plant-fossil groups. Published by Elsevier Science B.V.

International Journal of Coal Geology↗
USGS2010

Pressure calibrants in the hydrothermal diamond-anvil cell

Based on the equation of state of water (EOSW), experimental pressure in the hydrothermal diamond-anvil cell (HDAC) using pure water or dilute aqueous solutions as a pressure medium can be accurately determined at each measured temperature. Consequently, meaningful interpretations can be obtained for observations in the HDAC, which has been widely accepted as a versatile, modern apparatus for hydrothermal experiments. However, this is not true when other pressure media were used because there is no reliable way to determine experimental pressure other than the use of in situ pressure sensors. Most of the available pressure sensors are difficult to apply because they either require expensive facilities to perform the measurements or are unable to provide the accuracy needed for the interpretation of hydrothermal experiments. The only exception is to use the interferometric method to detect the ??-?? quartz transition, although such applications are limited to temperatures above 573??C. In this study, three pressure calibrants were calibrated for applications at lower temperatures, and they were based on visual observation of the ferroelastic phase transitions in BaTiO3 (tetragonal/cubic), Pb3(PO4)2 (monoclinic/trigonal), and PbTiO3 (tetragonal/cubic). For the phase transitions in BaTiO3 and Pb3(PO4)2, the temperature at which twinning disappears during heating was taken as the transition temperature (Ttr); the phase transition pressures (Ptr) can be calculated, respectively, from Ptr (MPa; ??3%) = 0.17 - 21.25 [(Ttr) - 115.3], and Ptr (MPa; ??2%) = 1.00 - 10.62 [(Ttr) - 180.2], where Ttr is in ??C. For the phase transition in PbTiO3, the temperature at which the movement of phase front begins (or ends) on heating (or cooling) was taken as the transition temperature (Ttr,h or Ttr,c), and the phase transition pressures on heating (Ptr,h) and cooling (Ptr,c) can be calculated from Ptr,h (MPa; ??4%) = 7021.7 - 14.235 (Ttr,h), and Ptr,c (MPa; ??4%) = 6831.3 - 14.001 (Ttr,c). Phase transitions for these three pressure calibrants are easy to detect visually, and their P-T phase boundaries have negative slopes and intersect isochors of most of the geologic fluids at high angles and, therefore, are easy to apply. Copyright ?? 2007 by V. H. Winston & Son, Inc. All rights reserved.

International Geology Review↗
USGS2017

Tracking riverborne sediment and contaminants in Commencement Bay, Washington, using geochemical signatures

Large rivers carry terrestrial sediment, contaminants, and other materials to the coastal zone where they can affect marine biogeochemical cycles and ecosystems. This U.S. Geological Survey study combined river and marine sediment geochemistry and organic contaminant analyses to identify riverborne sediment and associated contaminants at shoreline sites in Commencement Bay, Puget Sound, Washington, that could be used by adult forage fish and other marine organisms. Geochemical signatures distinguished the fine fraction (<0.063 millimeter, mm) of Puyallup River sediment—which originates from Mount Rainier, a Cascade volcano—from glacial fine sediment in lowland bluffs that supply sediment to beaches. In combination with activities of beryllium-7 ( 7 Be), a short-lived radionuclide, geochemical signatures showed that winter 2013–14 sediment runoff from the Puyallup River was transported to and deposited along the north shore of Commencement Bay, then mixed downward into the sediment column. The three Commencement Bay sites at which organic contaminants were measured in surface sediment did not have measurable 7 Be activities in that layer, so their contaminant assemblages were attributed to sources from previous years. Concentrations of organic contaminants (the most common of which were polycyclic aromatic hydrocarbons, polychlorinated biphenyls, and fecal sterols) were higher in the <0.063-mm fraction compared to the <2-mm fraction, in winter compared to summer, in river suspended sediment compared to river bar and bank sediment, and in marine sediment compared to river sediment. The geochemical property barium/aluminum (Ba/Al) showed that the median percentage of Puyallup River derived fine surface sediment along the shoreline of Commencement Bay was 77 percent. This finding, in combination with higher concentrations of organic contaminants in marine rather than river sediment, indicates that riverborne sediment-bound contaminants are retained in shallow marine habitats of Commencement Bay. The retention of earlier inputs complicates efforts to identify recent inputs and sources. Understanding modern sources and fates of riverborne sediment and contaminants and their potential ecological impacts will therefore require a suite of targeted geochemical studies in such marine depositional environments.

Washington↗
USGS1975

Mercury distribution in ancient and modern sediment of northeastern Bering Sea

Reconnaissance sampling of surface and subsurface sediment to a maximum depth of 80 m below the sea floor shows that typical values of 0.03 p.p.m. and anomalies of 0.2-1.3 p.p.m. mercury have been present in northeastern Bering Sea since Early Pliocene time. Values are highest in modern beach (maximum 1.3 and mean 0.22 p.p.m. Hg) and nearshore subsurface gravels (maximum 0.6 and mean 0.06 p.p.m. Hg) along the highly mineralized Seward Peninsula and in clayey silt rich in organic matter (maximum 0.16 and mean 0.10 p.p.m. Hg) throughout the region. Although gold mining may be partly responsible for high mercury levels in the modern beach near Nome, Alaska (maximum 0.45 p.p.m.), equally high or greater concentrations of mercury occur in buried Pleistocene sediments immediately offshore (maximum 0.6 p.p.m.) and in modern unpolluted beach sediments at Bluff (maximum 1.3 p.p.m.); this suggests that the contamination effects of mining may be no greater than natural concentration processes in the Seward Peninsula region. The mercury content of offshore surface sediment, even adjacent to mercury-rich beaches, corresponds to that of unpolluted marine and fresh-water sediment elsewhere. The normal values that prevail offshore may be attributable to entrapment of mercury-bearing heavy minerals on beaches near sources and/or dilution effects of offshore sedimentation. The few minor anomalies offshore occur in glacial drift derived from mercury source regions of Chukotka (Siberia) and Seward Peninsula; Pleistocene shoreline processes have reworked the drift to concentrate the heavy metals. The distribution pattern of mercury indicates that particulate mercury-bearing minerals have not been widely dispersed from onland deposits in quantities sufficient to increase mercury levels above normal in offshore sediments of Bering Sea; however, it shows that natural sedimentary processes can concentrate this mercury in beaches of the coastal zone where there already is concern because of potential pollution from man's activities.

Marine Geology↗