SEARCH · USGS Science

Results for “Mining, Metallurgy and Exploration”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,691 records · Page 53Linked to original sources

USGS2026

Neutron scattering reveals fractionation of natural gas mixtures in unconventional petroleum reservoir pores: Perspectives on energy resource recovery and storage

In unconventional petroleum reservoirs hydrocarbon fluids are hosted by both mineral and organic matter pores. These pores can have diameters that range from microns to less than a single nanometer and, for unconventional reservoirs, there is evidence that small pores ( <20 nm diameter) may constitute a large proportion of the available space. Understanding subsurface volumes and how fluids behave in them can be helpful for predicting hydrocarbon production and storage in the subsurface. One area with knowledge gaps regarding hydrocarbon behavior in small pores is the possibility for mixtures to fractionate (i.e., unmix) based on pore size or pore type. Mixture fractionation as a function of pore size could impact recovery of hydrocarbons, drive compositional shifts during production, and limit fluid storage within candidate reservoirs. To investigate natural gas fractionation in small geologic pores, we applied total neutron scattering to probe methane-ethane mixtures at reservoir pressures (up to ≈30 MPa) and temperature (60°C) within a sample from the Upper Cretaceous Niobrara Formation. Neutron scattering data reveal only minor fractionation occurs between methane and ethane in 20-nm diameter sample mesopores. Increased fractionation is observed for sample micropores, with up to 72% (±1% at 1-sigma) methane found in 2 nm diameter pores following injection of a 50%-50% methane-ethane mixture. These data provide rarely available direct experimental observations of hydrocarbon mixture behavior under nanoconfinement in a sample from an important unconventional petroleum reservoir. Our results are discussed in the context of evaluating hydrocarbon resources in unconventional reservoir meso- and micropores, reconciling observed gas composition changes during production, and more broadly, understanding subsurface pore volumes within an energy storage framework.

Fuel↗

USGS2025

Induced earthquakes are generally not tidally triggered in Oklahoma and Kansas

Human-induced earthquakes occur along critically stressed faults as injected wastewater simultaneously heightens fluid pressure and pushes faults to failure. We investigate the possibility that small stresses imposed by Earth tides could trigger earthquakes in the induced seismicity region of Oklahoma and Kansas from 2011 to 2018. We decluster a catalog consisting of ∼110,000 earthquakes using three methods (Reasenberg, nearest-neighbor distance, and phase-bin). We find no significant tidal earthquake triggering using Schuster's p -value test for the declustered catalogs as a whole. We search for localized triggering using discretized space-time cells and find ∼0–6% of cells have significant tidal triggering which is close to what is randomly expected (5%) and indicates there is an insignificant amount of tidal triggering for the full study region. One area that has significant p -values across multiple time windows, ∼2014–2016 is ∼15 km from a region of large wastewater injection volume. It is possible that localized tidal triggering occurs for this time and area because faults remain critically stressed and are particularly susceptible to slip under the small stress load from the semidiurnal tide. Possible explanations for the lack of tidal triggering in our broader study are that the pre-seismic stressing rate in the earthquake nucleation area is faster than the tidal stressing rate (∼3 kPa/day), faults are not close enough to critically stressed to be affected by tidal forcing, and that nucleation occurs over longer periods than the tides considered in this study (∼1, ∼14 days). Fluid injection could be the source of a higher pre-seismic stress rate.

Kansas, Oklahoma↗

USGS2026

Flood-inundation maps for Río Grande De Loíza in and near Caguas, Puerto Rico, 2026

Digital flood-inundation maps for a 2.7-mile reach of Río Grande De Loíza in Caguas, Puerto Rico, were created by the U.S. Geological Survey. Water-surface profiles were computed for the stream reach by using a one-dimensional, steady-state, step-backwater model. The model was calibrated to the current (2025) stage-streamflow relation (rating curve) for the U.S. Geological Survey streamgage 50055000, Río Grande De Loíza, Puerto Rico. The resulting hydraulic model was then used to compute 16 water-surface profiles for water levels (flood stages) ranging from 19.00 to 34.00 feet at the streamgage; these flood stages range from “moderate flood stage” to above “major flood stage” as defined by the National Weather Service. The 34.00-foot stage exceeds the historical maximum peak stage of 33.20 feet, recorded at the streamgage in 1945. The simulated water-surface profiles were used in combination with a digital elevation model derived from light detection and ranging (lidar) data to map the inundated areas associated with each flood profile. The flood-inundation maps and the supporting hydraulic model produced by this study can be used by emergency managers and local officials to assess flood-mitigation strategies and to define flood-hazard areas to help protect life and property, to coordinate flood-response activities such as evacuations and road closures, and to aid post-flood recovery efforts.

Puerto Rico↗

USGS2026

The effect of temperature, flow, density and disease on smallmouth bass (Micropterus dolomieu) early life growth rate

Individual growth rates of fish are influenced by gradually changing environmental conditions and rapid-onset events. However, there is a paucity of information on drivers of spatiotemporal variability in growth rates of fishes across large spatial extents. Using a 36-year dataset of smallmouth bass ( Micropterus dolomieu ) length-at-age data across 10 river reaches in Pennsylvania, USA ( n = 54,068 individuals), we estimated annual early life growth rates (mm year −1 ) and assessed the effects of relative abundance, summer temperature, summer streamflow rate and a disease outbreak on growth rate. We found that temperature had a positive effect on growth rate, varied spatially, and had a stronger effect in diseased reaches. There was also evidence for an impact of disease on early life growth through density-dependent mechanisms, with growth rates increasing from ∼85 to 101 mm·year −1 following disease-related decreases in abundance. This study adds to our understanding of the factors that shape early life growth, including rapid-onset events like disease which can have immediate and lasting effects on growth rate trajectory.

Pennsylvania↗

USGS1976

Transport and dispersion of fluorescent tracer particles for the dune-bed condition, Atrisco Feeder Canal near Bernalillo, New Mexico

A tracer technique in which mineral particles were coated with fluorescent dyes was used to study the rates of transport and dispersion of sediment particles`of various diameters and specific gravities for a dune-bed condition in an alluvial channel. The experiment was conducted in the Atrisco Feeder Canal near Bernalillo, N. Mex., between May 1 and July 14, 1967. A continuous point source of tracers, approximated by injections at 5- or 10-minute intervals, was maintained for 7 days so that the steady-dilution procedure could be used to calculate the transport rate of bed material. After termination of the injection process, the spatial-integration procedure was used to follow the movement of the tracers downstream and to calculate the transport rate. Samples of the bed material in transport and the accompanying tracers moving along the surface of the dune bed were obtained periodically throughout the study with the "dustpan" sampler especially designed for fluorescent tracer studies. In addition, the spatial distributions of the tracers in the dune bed were determined three times during the study by core sampling.

New Mexico↗

USGS2025

Reply to, “Comment on ‘The 1886 Charleston, South Carolina, earthquake: Relic railroad offset reveals rupture,’ by Roger Bilham and Susan E. Hough”

We welcome this opportunity to respond to Pratt et al. (2024) (hereinafter P24). Bilham and Hough (2023) proposed a “first-cut” elastic deformation model for the 1886 earthquake, a quantitative source model constrained by identified coseismic constraints. A key observation was the measurement of a lateral offset of a railroad line south of Summerville, leading to a model with predominately dextral slip and minor convergence, from which we concluded that active faulting had raised the Penholoway Marine Terrace >6 m since ∼770 ka. P24 questioned these constraints and proposed an alternative rupture model with predominantly reverse slip. This alternative model is neither consistent with coseismic constraints nor with other geophysical data. In a revised model presented here, we recognize that uplift of the Penholoway Terrace is confined to the eastern edge of the terrace, which we conclude results from active folding and tectonic transpression centered on the dextral fault that offset the railroad in 1886.

South Carolina↗

USGS2026

Altitude of the potentiometric surface and depth to water in the Mississippi River Valley alluvial aquifer, spring 2024

Potentiometric-surface and depth-to-water maps for spring 2024 were created for the Mississippi River Valley alluvial aquifer using groundwater-altitude data from 1,151 wells completed in the Mississippi River Valley alluvial aquifer and from the altitude of the top of the water surface in area rivers from 160 U.S. Geological Survey and U.S. Army Corps of Engineers streamgages. The potentiometric-surface and depth-to-water maps for 2024 were created to support investigations to characterize the Mississippi River Valley alluvial aquifer as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the Mississippi River Valley alluvial aquifer for spring 2024 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 330 feet (ft) above the North American Vertical Datum of 1988. The regional direction of the groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient direction was into the depression, and near rivers, where the groundwater gradient direction was either from the aquifer to the river or from the river into the aquifer. Groundwater depressions in the potentiometric-surface map are in the lower one-half of the Cache region and in most of the Grand Prairie and Delta regions. Depth to water by well in the Mississippi River Valley alluvial aquifer in spring 2024 ranged from 0.27 ft above land surface to 145.65 ft below land surface.

Arkansas, Illinois, Kentucky, Louisiana, Mississip↗

USGS2024

Will there be water? Climate change, housing needs, and future water demand in California

Climate change in California is expected to alter future water availability, impacting water supplies needed to support future housing growth and agriculture demand. In groundwater-dependent regions like California's Central Coast, new land-use related water demand and decreasing recharge is already stressing depleted groundwater basins. We developed a spatially explicit state-and-transition simulation model that integrates climate, land-use change, water demand, and groundwater gain-loss to examine the impact of future climate and land use change on groundwater balance and water demand in five counties along the Central Coast from 2010 to 2060. The model incorporated downscaled groundwater recharge projections based on a Warm/Wet and a Hot/Dry climate future from a spatially explicit hydrological process-based model. Two urbanization projections from a parcel-based, regional urban growth model representing 1) recent historical and 2) state-mandated housing growth projections were used as alternative spatial targets for future urban growth. Agricultural projections were based on recent historical trends from remote sensing data. Annual projected changes in groundwater balance were calculated as the difference between land-use related water demand, based on historical estimates, and climate-driven recharge plus agriculture return flows. Results indicate that future changes in climate-driven groundwater recharge, coupled with cumulative increases in agricultural water demand, result in overall declines in future groundwater balance, with a Hot/Dry future resulting in cumulative groundwater decline in all but Santa Cruz County. Cumulative declines by 2060 are especially prominent in San Luis Obispo (−2.9 to −5.1 Bm 3 ) and Monterey counties (−6.5 to −8.7 Bm 3 ), despite limited changes in agricultural water demand over the model period. These two counties show declining groundwater reserves in a Warm/Wet future as well, while San Benito and Santa Barbara County barely reach equilibrium. These results suggest future groundwater supplies may not be able to keep pace with regional demand and declining climate-driven recharge, resulting in a potential reduction in water security in the region. However, our county-scale projections showed new housing and associated water demand does not conflict with California's groundwater sustainability goals. Rather, future climate coupled with increasing agricultural groundwater demand may reduce water security in some counties, potentially limiting available groundwater supplies for new housing.

California↗

USGS2025

Bathymetric and acoustic-backscatter mapping of Lake Sammamish, Washington, during USGS field activity 2021-656-FA

In 2021, scientists from the U.S. Geological Survey (USGS) acquired bathymetric and acoustic-backscatter data within Lake Sammamish, Washington. Mapping was completed to find evidence of past earthquakes such as underwater landslides and is part of a larger USGS project to understand the overall geologic hazards history of the Cascadia Margin region. The survey was conducted using the USGS research vessel Parke Snavely outfitted with an interferometric sidescan-sonar system for swath mapping. Three estimates of bathymetric uncertainty were calculated from the post-processed bathymetric data. This report provides a summary of the mapping mission.

Washington↗

USGS2025

Groundwater dominates snowmelt runoff and controls streamflow efficiency in the western United States

Climate change in seasonally snow-covered mountain catchments is reducing water supply and decreasing streamflow predictability. Here, we use tritium age dating to show that contrary to the common assumption that snowmelt quickly contributes to runoff, streamflow during snowmelt in western US catchments is dominated by older groundwater. The average age of streamwater during snowmelt runoff (5.7 ± 4.3 years) was intermediate to the average age of groundwater (10.4 ± 4.5 years) and recent precipitation, indicating that 58% (±34%) of snowmelt runoff was derived from groundwater. Water ages, streamflow, and groundwater storage were mediated by bedrock geology: low-permeability hard rock/shale catchments exhibited younger ages, less storage, and more efficient streamflow generation than high-permeability sandstone/clastic catchments. Our results demonstrate that snowmelt runoff is the result of multiple prior years of climate mediated by groundwater storage. Including these interactions will be crucial for predicting water resources as climate and landscape changes accelerate.

western united States↗

USGS2025

Gravity and magnetic surveys of the Skaergaard intrusion, East Greenland

Aeromagnetic and gravity surveys of the Skaergaard intrusion in East Greenland were carried out in July–August 1971 as part of a grant to the University of Oregon Center for Volcanology to refine the models of crystallization and differentiation of the intrusion, specifically to test whether the intrusion is underlain by dense rocks of a reservoir 20 kilometers (km) thick (referred to as a “hidden zone”). The Skaergaard intrusion is a source of platinum group elements that are critical mineral resources for many technologies, and because no new data have been collected these legacy datasets remain a valuable asset. The total-intensity aeromagnetic survey was flown in early July 1971 with a proton precession magnetometer at a constant barometric altitude of 1.5 km (5,000 feet) with a nominal line spacing of 1 km. Two gravimeters were used to acquire 168 stations of which 86 were at known altitudes (mainly sea level) and 82 had altitudes measured by altimetry in late July–August 1971. Finally, a north-south ground vertical-intensity magnetic traverse was completed across the intrusion together with collection of oriented hand specimens. The hand specimens were measured for remnant magnetization and density, along with density measurements of more specimens collected by expedition geologists for other purposes. The intrusion is composed of layered gabbro with extensive crystal fractionation that is dense and strongly reversely polarized. After terrain correction and standard Bouguer gravity reduction, the gravity anomaly dataset was corrected for all rock above sea level using the density measurements of the various zones of the intrusion and the topographic and geologic maps (variable density Bouguer gravity reduction). A large regional gradient in the gravity anomaly data was removed using orthogonal polynomial fitting to the gridded data. The zonal volumes of rock below sea level were calculated from the dipping polygonal layer gravity model of the intrusion below sea level and combined with elliptic cross–section cylinders for the various zones above sea level to approximate the original zonal volumes of the intrusion. The residual gravity anomaly of 18–20 milligals (mGal) was only about half of the expected anomaly if a large hidden zone proposed from petrologic considerations were present, and both two-dimensional and three-dimensional models imply that the exposed series of intrusion zones explain the gravity anomaly by their down-dip extension below sea level together with a small hidden-zone volume. A three-dimensional model of the exposed rocks and their down-dip extension below sea level also can account for the aeromagnetic anomaly with little or no requirement for hidden-zone rock. The middle and upper zone units of the intrusion contain the most magnetite and account for most of the aeromagnetic anomaly.

Skaergaard intrusion↗

USGS2025

Three-dimensional seismic velocity model for the Cascadia Subduction Zone with shallow soils and topography, version 1.7

The U.S. Geological Survey’s seismic velocity model for the Cascadia Subduction Zone provides P- and S-wave velocity ( V P and V S , respectively) information from 40.2° to 50.0° N. latitude and −129.0° to −121.0° W. longitude, and is used to support a variety of research topics, including three-dimensional (3D) earthquake simulations and seismic hazard assessment in the Pacific Northwest. This report describes an update to the previous version (v) 1.6 of the 3D seismic velocity model for the Cascadia Subduction Zone. This new model (herein referred to as v1.7) contains more detailed near-surface structure for improved earthquake ground motion modeling. Updated features include the addition of a new shallow soil velocity model in the top few hundred meters and the option of adding user-specified topography. Although v1.6 of the Cascadia seismic velocity model has a minimum V S of 600 meters per second (m/s), the new model (v1.7) has a minimum V S of approximately 40 m/s. Overall, this update will allow for more accurate ground motion estimates from 3D simulations of scenario earthquakes in the Cascadia Subduction Zone region.

British Columbia, California, Oregon, Washington↗

USGS2024

Static and dynamic strain in the 1886 Charleston, South Carolina, earthquake

During the 1886 Mw 7.3 Charleston, South Carolina, earthquake, three railroads emanating from the city were exposed to severe shaking. Expansion joints in segmented railroad tracks are designed to allow railroad infrastructure to withstand a few parts in 10,000 of thermoelastic strain. We show that, in 1886, transient contractions exceeding this limiting value buckled rails, and transient extensions pulled rails apart. Calculated values for dynamic strain in the meizoseismal region are in reasonable agreement with those anticipated from the relation between strain and moment magnitude proposed by Barbour et al. (2021) and exceed estimated tectonic strain released by the earthquake by an order of magnitude. Almost all of the documented disturbances of railroad lines, including evidence for shortening of the rails, can thus be ascribed to the effects of dynamic strain changes, not static strain. Little or no damage to railroads was reported outside the estimated 10 −4 dynamic strain contour. The correspondence between 10 −3 and 2×10 −4 contours of dynamic strain and Mercalli intensity 9 and 8, anticipated from the dependence of each quantity on peak ground velocity, suggests it may be possible to use railroad damage to quantitatively estimate shaking intensity. At one location, near Rantowles, ≈20 km west of Charleston, a photograph of buckled track taken one day after the earthquake has been cited as evidence for shallow dextral slip and has long focused a search for a causal fault in this region. Photogrammetric analysis reveals that the buckle was caused by transient contraction of <10 cm with no dextral offset. Our results further weaken the evidence for faulting in the swamps and forests south of the Ashley River in 1886, hitherto motivated by the photograph and limited macroseismic evidence for high‐intensity shaking.

South Carolina↗

USGS2024

Improving crop-specific groundwater use estimation in the Mississippi Alluvial Plain: Implications for integrated remote sensing and machine learning approaches in data-scarce regions

Study region The Mississippi Alluvial Plain (MAP) in the United States (US). Study focus Understanding local-scale groundwater use, a critical component of the water budget, is necessary for implementing sustainable water management practices. The MAP is one of the most productive agricultural regions in the US and extracts more than 11 km 3 /year for irrigation activities. Consequently, groundwater-level declines in the MAP region pose a substantial challenge to water sustainability, and hence, we need reliable groundwater pumping monitoring solutions to manage this resource appropriately. New hydrological insights for the region We incorporate remote sensing datasets and machine learning to improve an existing lookup table-based model of groundwater use previously developed by the U.S. Geological Survey (USGS). Here, we employ Distributed Random Forests, an ensemble machine learning algorithm to predict annual and monthly groundwater use (2014–2020) throughout this region at 1-km resolution, using pumping data from existing flowmeters in the Mississippi Delta. Our model compares favorably with the existing USGS model, with higher R 2 (0.51 compared to 0.42 in the previous model), and lower root mean square error (RMSE) and mean absolute error (MAE)— 0.14 m and 0.09 m, respectively in our model, compared to 0.15 m and 0.1 m in the previous model. Therefore, this work advances our ability to predict groundwater use in regions with scarce or limited in-situ groundwater withdrawal data availability.

Journal of Hydrology Regional Studies↗

USGS2025

‘The fish that stop’: Drivers of historical decline for Pacific cod and implications for modern management in an era of rapidly changing climate

n the Gulf of Alaska, a series of marine heat waves depleted Pacific cod ( Gadus macrocephalus ) biomass to the lowest abundance ever recorded and led to the fishery’s closure in 2020. Although the fishery has been productive for decades, this collapse may have historical precedents. Traditional knowledge holders refer to cod as ‘the fish that stop’, and there is a suggested period of decline in the 1930s. Here we conduct a catch reconstruction of the early commercial fishery (1864–1950), confirming a rapid catch decline in the 1920s and 1930s. Next, we evaluate evidence for possible drivers. We document changes to demand and technology that contributed to declining catch. However, we also find both qualitative and quantitative evidence of depletion, suggesting catch declines were not driven entirely by social factors. Overfishing may have contributed to localized catch declines as evidenced by declining catch rates in heavily fished localities. We also find evidence for climate as a driver of regional decline, with the period of catch decline characterized by up to 2°C higher temperatures as compared to the earlier period of high fisheries production. Our analysis underscores the importance of understanding long-term drivers of fisheries productivity and the value of linking fisheries and climate histories.

Alaska↗

USGS2025

Assessing nonpoint-source uranium pollution in an irrigated stream-aquifer system

Uranium (U) in rocks and soils of arid and semi-arid environments can be mobilized by irrigation and fertilization, posing environmental and health risks. Elevated U, along with selenium (Se) and nitrate (NO 3 ) co-constituents, necessitates careful monitoring and management. We developed a distributed-parameter numerical model to assess U pollution in an irrigated stream-aquifer system, applying it to a 552 km 2 region in Colorado's Lower Arkansas River Valley (LARV) over 14 years. A MODFLOW model, describing groundwater and stream flow, was coupled with an RT3D-OTIS model to portray reactive U transport. Calibration using the PESTPP-iES iterative ensemble smoother (iES) software indicated good agreement with observed U concentrations. The model revealed substantial and variable U levels across the LARV, highlighting potential hotspots and possible contributing factors, such as geological composition of the bedrock and near-surface shale and aquifer sediments derived from them, irrigation practices, and riparian landscape. U levels exceed the chronic standard (85th percentile = 30 μg/L, set by the US Environmental Protection Agency), which is the permissible regulatory threshold, in groundwater across 44 % of the region and along the river by an average factor of 2.9. Simulated average U concentrations in the non-riparian aquifer and river are 124 μg/L and 60 μg/L, respectively, compared with 112 μg/L and 62 μg/L for measured values. The average 85th percentile U concentration is 222 μg/L in the aquifer and 82 μg/L in the river. Average simulated U mass loading to the river is 0.17 kg/day per km, compared to an estimated 0.23 kg/day per km. Findings provide a baseline for comparing future simulated outcomes of alternative best management practices (BMPs) for U pollution mitigation and offer a methodology applicable to other irrigated regions.

Colorado↗

USGS1990

Effects of storm-water runoff on local ground-water quality, Clarksville, Tennessee

Storm-related water-quality data were collected at a drainage-well site and at a spring site in Clarksville, Tennessee, to define the effects of storm-water runoff on the quality of ground water in the area. A dye-trace test verified the direct hydraulic connection between the drainage well and Mobley Spring. Samples of storm run off and spring flow were collected at these sites for nine storms during the period February to October 1988. Water samples were collected also from Mobley Spring and two other springs and two observation wells in the area during dry-weather conditions to assess the general quality of ground water in an urban karst terrain. Evaluation of the effect of storm-water runoff on the quality of local ground water is complicated by the presence of other sources of contaminants in the area Concentrations and load for most major constituents were much smaller in storm-water runoff at the drainage well than in the discharge of Mobley Spring, indicating that much of the chemical constituent load discharged from the spring comes from sources other than the drainage well. However, for some of the minor constituents associated with roadway runoff (arsenic, copper, lead, organic carbon, and oil and grease), the drainage well contributed relatively large amounts of these constituents to local ground water during storms. The close correlation between concentrations of total organic carbon and concentrations of most trace metals at the drainage-well and Mobley Spring sites indicates that these constituents are transported together. Many trace metals were flushed early during each runoff event. Mean storm loads for copper, lead, zinc, and four nutrient species (total nitrogen, ammonia nitrogen, total phosphorus, and orthophosphorus) in storm-water runoff at the drainage-well site were lower than mean storm load predicted from an existing regression model. The overprediction by the model may be a result of the small size of the drainage area relative to the range of drainage areas used in the development of the models, or to the below-normal amounts of rainfall during the period of sampling for this investigation. Loads& in storm-water runoff for 22 constituents were extrapolated from sampled storms to total loads for the period February to October 1988. Calculated loads for trace metals for the period ranged from 0.030pound.s for cadmium to 12pound.s for strontium. Loads of the primary nutrients ranged from 0.97pounds for nitrite as nitrogen to 34pounds of organic nitrogen. Storm-water quality at the drainage-well and Mobley Spring sites was compared to background water quality of the local aquifer; as characterized by dry-weather samples from three springs and two observation wells in the Clarksville area. Concentrations of total-recoverable cadmium, chromium, copper, lead, and nickel were higher in many stormwater samples from both the drainage-well and Mobley Spring sites than in samples from any other site. In addition, concentrations of total organic carbon, methylene blue active substances, and total-recoverable oil and grease were generally higher in storm-water samples from the drainage-well site than in any ground-water sample. Densities of fecal coliform and fecal streptococcus bacteria and concentrations of total recoverable iron, manganese, and methylene blue active substances in storm samples from the drainage-well site exceeded the maximum contaminant levels listed in Tennessee’s drinking-water standards (1988) by as much as 2,500 and 5,500 colonies per 100 milliliters, and 2.7, 0.29, and 0.05 milligrams per liter, respectively. Densities of fecal coliform and fecal streptococcus bacteria and concentrations of total-recoverable iron, manganese, and lead in storm samples from Mobley Spring exceeded the maximum contaminant levels by as much as 500 and 4,500 colonies per 100 milliliters, and 18.7,0.65, and 0.02 milligrams per liter, respectively. For iron, manganese, and bacteria, these undesirable levels are not necessarily attributable to storm-water recharge, because concentrations of these constituents also exceeded drinking-water standards in one or more of the dry-weather samples from selected springs and observation wells in the area.

Tennessee↗

USGS2025

Assimilation of reduced carbon triggers platinum alloy saturation in mafic and ultramafic magmas

It is generally observed that magmatic sulfide ores have higher ratios of Pd/Pt than the mantle-like values of their parental magmas. This discrepancy has defied simple explanation because the partitioning behavior of both elements between sulfide and silicate liquids is very similar. Assimilation of sulfur- and carbon-rich country rocks by mafic and ultramafic magmas is considered a critical, if not essential, step in the formation of magmatic base metal sulfide deposits. Although there is general consensus that the assimilation of external sulfur and carbon promotes sulfide saturation, the effect of carbon assimilation on the solubilities of platinum-group elements in natural S-bearing silicate melt has been overlooked. In this study, we investigate the variations of platinum and palladium solubilities during assimilation of graphite and methane through thermodynamic modeling, in comparison with data from an array of highly distinctive magmatic sulfide ore systems representing ages from Archean to Paleozoic, melt compositions from komatiite to basalt, and magmatic settings including lavas, hypabyssal intrusions, plutonic continental arc roots, and plutonic layered intrusions, namely: Raglan, Norilsk-Talnakh, Lac des Iles, and the J-M Reef of the Stillwater Complex. We model assimilation-fractional crystallization processes to estimate the reduction of oxygen fugacity ( ⁠fO2⁠ ) of the melt due to incorporation of graphite and methane. The simulations show that although Pd remains highly soluble during the progressive assimilation of reduced carbon, Pt solubility decreases significantly as the silicate melt becomes increasingly reduced. With less than 8 % of sediment assimilation, Pt alloy may saturate and then deviate from sulfide-undersaturated silicate melts, concomitantly increasing the Pd/Pt value of the remaining melts of the Raglan and Norilsk-Talnakh systems. For the Lac des Iles and Stillwater systems, a higher extent of assimilation is needed to reach Pt saturation because of the relatively carbon-poor nature of the lower crustal rocks. The assimilation of methane volatiles is shown to be more effective than graphite assimilation, and it provides a pathway to Pt alloy fractionation in the absence of detectable amounts of bulk host-rock assimilation. High Pd/Pt values have been documented in many world-class magmatic sulfide deposits whose parental magmas have demonstrably experienced crustal contamination. Our model suggests that although anomalous Pd/Pt values may be explained by other mechanisms such as incongruent melting of preexisting sulfide or differences in the diffusivities of the metals within achieving equilibration, the assimilation of graphite or methane may play an important role in the global occurrence of magmatic sulfide ores with elevated Pd/Pt values.

Economic Geology↗