SEARCH · USGS Science

Results for “Applied and Environmental Microbiology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,657 records · Page 53Linked to original sources

USGS2024

Groundwater and surface-water interactions in the Lower Duwamish Waterway, Seattle, Washington

The U.S. Geological Survey (USGS), in cooperation with the Washington State Department of Ecology (Ecology), conducted a study to describe the current understanding of the regional groundwater system of the lower Duwamish River valley and groundwater and surface-water interactions in the lower Duwamish Waterway. The lower Duwamish Waterway is the final 5-mile (mi) reach of the Duwamish River before it empties into Elliott Bay in Puget Sound near Seattle, Washington. A nearshore site (hereinafter referred to as “Nearshore Site” to distinguish the particular site from general discussions of nearshore areas) along the western shoreline of the Duwamish River, about 1.5 mi upstream from the river mouth, was selected for focused groundwater data collection by USGS. Data loggers were deployed in seven groundwater wells and one stilling well in the Duwamish River to measure specific conductance, temperature, and depth at 15-minute intervals for a period of about 2 years. At the Nearshore Site during 2020–22, water levels in the shallow wells were 3–8 feet (ft) higher than water levels in the deep wells, providing evidence for a low-permeability layer between the shallow and deep aquifers in this area. The shallow wells had a pronounced seasonal variability, with high water levels in winter and low water levels in summer. Data from the deep wells showed far less seasonal variability, with slight increases in winter and a near-constant water level from spring to autumn. The deep wells had a strong hydraulic connection to the Duwamish River, as evidenced by the synchronous water-level variability during the tidal cycle, whereas the shallow wells had minimal to no tidal response. The potentiometric maps developed for the Nearshore Site and surrounding areas indicate large differences in groundwater-flow directions for the shallow and deep aquifers at low and high tides. For the shallow aquifer, flow is toward the lower Duwamish Waterway near the Nearshore Site, regardless of the tidal condition. For the deep aquifer, a potentiometric trough forms parallel to the shoreline during high tide, indicating that groundwater flow converges from the uplands to the west and the Duwamish River to the east. The geometry of the potentiometric surfaces between the nearshore-most well and the shoreline is complex and is further confounded by intermittent shoreline armoring and other buried infrastructure, which could serve as either a barrier or a conduit to flow. Groundwater and surface-water interactions in the lower Duwamish Waterway are inherently complex as a result of three overarching factors. First, water levels in the lower reaches of the Duwamish River vary daily by 11–16 ft because of tides from Puget Sound, which create large swings in the hydraulic gradient in the nearshore groundwater system. Second, the density and chemical composition of water in the Duwamish River change daily with the tides and seasonally, which constrains how river water entering the nearshore sediments interacts with discharging groundwater. Third, the nearshore subsurface and shoreline conditions are heterogenous because of extensive shoreline armoring over the past century, which governs the flow of groundwater and infiltrating river water. These unique features of groundwater and surface-water interactions in the lower Duwamish Waterway thus govern the transport of terrestrial contaminants to the lower Duwamish Waterway. Furthermore, the heterogenous aquifer properties in the lower Duwamish Waterway contribute to spatially and temporally dynamic contaminant-transport processes.

Washington↗

USGS2025

Reduction of red bed sedimentary rocks in connection with energy metal ore formation: A case study from the Sinbad seep, Mesa County, Colorado

The Paradox Basin’s Sinbad seep is a modern analog for ancient bleaching of red bed sediments by introduced alkaline, reducing brines. This bleaching, involving reductive alteration of former red beds, is essential ground preparation that enables the altered rocks to trap Cu, U, and V from later oxidized fluids, forming ore deposits. Study of Sinbad thus offers insights into these metallic mineralization processes in the Paradox and other sedimentary basins. The Sinbad seep occurs where shallow groundwater interacts with organic-rich petroleum source rocks, flows up a fault, and discharges into Salt Creek. Ratios of Na/Cl, Na/Br, and Cl/Br, plus high sulfate concentrations, indicate that the salinity of the seep water originated from dissolution of halite and gypsum during topographically driven flow of meteoric water across a diapir of the Pennsylvanian Paradox Formation, rather than from deep basinal brines. In contact with the organic-rich shales of the Paradox, these SO 4 -rich waters become reduced through bacterial reduction, producing H 2 S. The waters react with red beds of the Permian Cutler Formation, causing pervasive bleaching. The bleaching at Sinbad is characterized by iron-conservative reduction of ferric iron in diagenetic hematite and detrital ilmenite and magnetite to Fe sulfides. The ferrous iron is retained in these sulfides likely as sorbed Fe. Associated alteration includes precipitation of quartz and feldspar overgrowths, partial dissolution of detrital quartz and feldspar caused by pressure solution, formation of clay and authigenic rutile, and precipitation of carbonate and gypsum. The Fe sulfides rapidly degenerate to a mixture of jarosite and iron oxides on weathering at the surface. Among the major-oxide elements and most trace elements, there is no statistical difference between unbleached and bleached samples. The exceptions are uranium and sulfur, which are somewhat greater in bleached samples. Fission track radiography illuminates that uranium is preferentially concentrated in iron oxide cements, iron sorbed into detrital clasts, and finely disseminated iron oxide in illite cement in bleached samples. A leaching experiment suggests that uranium may be more easily available for mobilization from rocks that have undergone bleaching alteration, making them potential U sources. In addition, bleached rocks form effective traps for U, V, and some Cu mineralization.

Colorado↗

USGS2025

Reservoir thermal energy storage pre-assessment for the United States

Storing thermal energy underground for later use in electricity production or direct-use heating/cooling is a promising, viable, and economical green energy option. Reservoir thermal energy storage (RTES) is one such option, which stores energy in underutilized permeable strata with low ambient groundwater flow rates and more geochemically evolved (e.g. brackish/saline) waters relative to overlying principal aquifer systems. The U.S. Geological Survey has begun assessing RTES potential nationally by focusing on five generalized geologic regions (Basin and Range, Coastal Plain, Illinois Basin, Michigan Basin, Pacific Northwest) across the United States. Hydrogeologic reservoir models are developed for the following eight metropolitan area cities within those regions to evaluate RTES performance across different climates and subsurface conditions: Albuquerque, New Mexico; Charleston, South Carolina; Chicago and Decatur, Illinois; Lansing, Michigan; Memphis, Tennessee; Phoenix, Arizona; and Portland, Oregon. Evaluated metrics include estimated required well spacing, thermal storage capacity, and thermal recovery efficiency through time. Also considered for each reservoir are potential complicating factors, including reservoir depth, thermally driven free convection, and groundwater salinity. This work focuses on direct-use cooling because the need for cooling modern office buildings greatly exceeds that for heating in most parts of the country (Falta and others, 2016); however, the evaluated metrics are also relevant to heating and electricity applications. Results indicate that favorable RTES conditions exist in each region, with the Coastal Plain and Basin and Range being especially favorable for thermal storage capacity, while the Pacific Northwest and Michigan Basin excel at energy recovery for the evaluated cooling application. The results underscore the utility of developing maps of thermal storage capacity, subsurface temperature models, and volumetric estimates of thermal storage capacity to serve as key RTES resource classification standards. Overall, this pre-assessment provides a basic understanding of RTES potential in several cities and geologic regions throughout the country and will aid ongoing thermal energy storage assessment efforts.

Arizona, Illinois, Michigan, New Mexico, Oregon, S↗

USGS2025

Quantitative subsurface characterization illuminates the origin of the Quaternary Mississippi River Valley alluvial aquifer

The Mississippi River Valley alluvial aquifer (MRVA) is vital to U.S. food security and global agricultural supply. However, quantitative understanding of its Quaternary origin, architecture, and hydrologic function remains incomplete. Here we develop a three-dimensional hydrostratigraphic model to characterize the deposition of clay and silt, fine-medium sands, and graveliferous sands using lithologic data from 75,000 boreholes compiled across the Lower Mississippi Valley and a geostatistical method—interval kriging. We find that cyclic glacial entrenchments, evidenced by remnants of pre-Wisconsinan postglacial sediments, alongside geodynamic activities shaped the MRVA basal configuration. Stratal weakening from faulting and salt diapirism enhanced glacial incision and thereby produced abrupt aquifer thickening. We demarcate the top of graveliferous sands as the regional marker of the Pleistocene-Holocene transition. The MRVA hydrostratigraphy reveals hydrologic function and geologic controls on groundwater storage and quality, advancing the assessment of aquifer sustainability under a changing climate, with implications for alluvial aquifers globally.

Arkansas, Illinois, Kentucky, Louisiana, Mississip↗

USGS2025

Completion summary for monitor wells NRF-17 and NRF-18 at the Naval Reactors Facility, Idaho National Laboratory, Idaho

The U.S. Geological Survey (USGS)—in cooperation with the U.S. Department of Energy (DOE) for the Naval Reactors Laboratory Field Office that supports operations for the Naval Reactors Facility (NRF) located at the Idaho National Laboratory (INL)—drilled and constructed well NRF-17 (formerly borehole USGS 151) and well NRF-18 (formerly borehole USGS 152) for stratigraphic framework analyses and water-quality monitoring at the Idaho National Laboratory (INL) near the NRF, in southeastern Idaho. Borehole USGS 151 was continuously cored from about 48 to 1,070 feet (ft) below land surface (BLS); rotary drilled from approximately 1,070 to 1,720 ft BLS; and re-drilled to complete construction as a monitor well NRF-17, completed to 461 ft BLS. Borehole USGS 152 was continuously cored from approximately 19 to 1,259 ft BLS; rotary drilled from approximately 1,259 to 1,630 ft BLS; and re-drilled to complete construction as a monitor well NRF-18, completed to 450 ft BLS. Geophysical data were examined with photographed core material to record lithologic descriptions and to suggest zones where groundwater flow was anticipated. Basalt flows varied from highly fractured to dense, with high-to-low vesiculation. Well NRF-17 generally was constructed in mostly dense basalt (greater than 75 percent), and well NRF-18 was constructed in primarily fractured and (or) vesicular basalt. In well NRF-17, the well capacity is directly affected by the limited amount of fractured basalt, which serves as the primary pathway for groundwater. This effect was observed during the pumping test conducted after the well's final construction. Single-well aquifer tests were done at wells NRF-17 and NRF-18 to provide estimates of transmissivity and hydraulic conductivity after final well construction and initial well development. Estimated values of transmissivity and hydraulic conductivity for well NRF-17 were 8.81 feet squared per day (ft 2 /d) and 1.04×10 -2 feet per day (ft/d), respectively. Estimated values of transmissivity and hydraulic conductivity for well NRF-18 were 4.77×10 3 ft 2 /d and 5.61 ft/d, respectively. The NRF-17 pump test resulted in 19.41 ft of measured drawdown at a sustained average pumping rate of 3.3 gallons per minute (gal/min). The NRF-18 pump test resulted in 0.55 ft of measured drawdown at a sustained average pumping rate of 31.0 gal/min. Water-quality samples collected from the two wells were analyzed for cations, anions, metals, nutrients, volatile organic compounds, stable isotopes, and radionuclides. Water samples for select inorganic constituents showed concentrations consistent with signatures from tributary valley groundwater with influences from ephemeral surface-water recharge from the Big Lost River. Water-quality samples analyzed for stable isotopes of oxygen and hydrogen are consistent with signatures from tributary valley groundwater and surface-water recharge inputs to the aquifer. No measured water-quality results were greater than their respective maximum contaminant levels for public drinking-water supplies. Inorganic and nutrient water-quality results for well NRF-17 and well NRF-18 suggest the groundwater in this area is potentially affected by industrial wastewater disposal.

Idaho↗

USGS2024

The projected exposure and response of a natural barrier island system to climate-driven coastal hazards

Accelerating sea level rise (SLR) and changing storm patterns will increasingly expose barrier islands to coastal hazards, including flooding, erosion, and rising groundwater tables. We assess the exposure of Cape Lookout National Seashore, a barrier island system in North Carolina (USA), to projected SLR and storm hazards over the twenty-first century. We estimate that with 0.5 m of SLR, 47% of current subaerial barrier island area would be flooded daily, and the 1-year return period storm would flood 74%. For 20-year return period storms, over 85% is projected to be flooded for any SLR. The modelled groundwater table is already shallow (< 2 m deep), and while projected to shoal to the land surface with SLR, marine flooding is projected to overtake areas with emergent groundwater. Projected shoreline retreat reaches an average of 178 m with 1 m of SLR and no interventions, which is over 60% of the current island width at narrower locations. Compounding these hazards is subsidence, with one-third of the study area currently lowering at > 2 mm/yr. Our results demonstrate the difficulty of managing natural barrier systems such as those managed by federal park systems tasked with maintaining natural ecosystems and protecting cultural resources.

North Carolina↗

USGS2026

Tectonically driven integration of the 4.8 Ma Colorado River USA tracked with detrital sanidine and fish genetics

The development of the continental-scale Colorado River system, western USA, from 8 to 4.8 Ma, is revealed using 60-40 Ma detrital sanidine tracer grains and fish phylogeny. Here we show that precursor paleoriver segments became integrated north to south as traced by 60-40 Ma sand grains that were derived from the north and sequentially appeared in the 25-8 Ma Browns Park Formation of Utah, 7-6 Ma upper Bidahochi Formation of Arizona, and 4.8 Ma Bouse Formation of the lower Colorado River and proto Gulf of California. This timing is mimicked by molecular clock estimates of divergence times among fish lineages. River integration was a response to headwater uplifts in the Yellowstone hotspot track and Rocky Mountains. 40 Ar/ 39 Ar ages refine the timing for mantle-drips that caused subsidence, then uplift, of depositional basins that influenced the integration pathway and tempo. The ~ 3-million-year timescale suggests that multiscale mantle-driven uplift, rather than lake spillover, was the primary driver for integration of the proto-Colorado River through Grand Canyon.

Colorado River↗

USGS2025

Colored shaded-relief bathymetry and acoustic backscatter of Lake Sammamish, Washington

Evidence of strong earthquakes (such as underwater landslides and associated deposits) may be recorded within the lacustrine sediments of Pacific Northwest lakes. The floor of Lake Sammamish, Wash., an approximately 11 kilometer (6.8 mile) long, 2 kilometer (1.2 mile) wide, and 35 meter (114.8 feet) deep lake located in a populated region just east of Seattle, was mapped by the U.S. Geological Survey in November of 2021 to search for evidence of past earthquakes. Mapping was conducted using a SWATHplus-M 234-kHz interferometric side-scan sonar system was pole-mounted on the U.S. Geological Survey research vessel Parke Snavely, and the system collected full-coverage bathymetric and acoustic backscatter data, which were processed to 2-meter spatial resolution. Two maps were created, a colored shaded-relief bathymetric map showing lake floor morphology (sheet 1), and an acoustic-backscatter map showing backscatter intensities (sheet 2). The results may then be utilized together to investigate past earthquake activity.

Washington↗

USGS2024

Spatial differences in soil nutrients along a hydrographic gradient on floodplains in Dongting Lake

The spatial heterogeneity of soil nutrients is crucial for the water bird and whole floodplain wetland ecosystem in large lakes, and it is influenced by the dramatic water level changes and sedimentation progress in West Dongting Lake (WDL). Soil samples were collected at various soil depths along the Yuan River and Li River that feed into WDL. The concentrations of soil total organic carbon (TOC), total nitrogen (TN), total phosphorus (TP), and soil grain size were tested. The stoichiometric ratios of C, N, P, and the mean value of soil grain size ( Mz ) were calculated. The differences of soil TOC, TN, TP and the stoichiometric ratio at different sites and soil depths were compared. Linear regression was used to explore the relationships of Mz and nutrient concentrations, and relationships between TOC, TN, and TP. Redundancy analysis was used to explore the relationship between soil nutrients, heavy metal concentrations, and plant community diversity. The results showed that the distributions of soil TOC, TN, and TP concentrations differed across regions in west Dongting Lake along the Yuan and Li Rivers. Total organic carbon concentration differed at different sedimentation depths. Soil grain size showed negative effect with soil TOC, TN, and TP concentrations in this region. Plant community diversity correlated positively with soil TOC and negatively with Hg. West Dongting Lake was N limited despite the high wet deposition of N. It could potentially be attributed to the insufficient presence of aerobic environments for microbes during intermittent flooding of the floodplain, coupled with feeble mineralization. This study can provide valuable insights for the conservation of water bird habitats and wetland ecosystems.

West Dongting Lake↗

USGS1997

Integrity of production wells and confining unit at the Naval Weapons Industrial Reserve Plant, Dallas, Texas, 1995

Ground water in the shallow alluvial aquifer is contaminated at the Naval Weapons Industrial Reserve Plant, Dallas, Texas. Five production wells at the site are cased through the alluvial aquifer and underlying units and are screened in either the Paluxy or Twin Mountains aquifers. Three abandoned wells, originally completed in the Twin Mountains aquifer but filled with drilling mud in 1958, also penetrate the alluvial aquifer. The Paluxy and Twin Mountains aquifers are used for drinking-water supplies in and around the Dallas-Fort Worth metroplex. Trichloroethylene and its degradation products, dichloroethylene and vinyl chloride, and the metal chromium previously have been detected in the shallow alluvial aquifer. Current (1995) analyses of water-quality samples taken from the static water column of the five production wells and one of the abandoned wells indicate no trichloroethylene, dichloroethylene, or vinyl chloride in the water column of these wells. Chromium was detected in all samples, but concentrations were less than the practical quantitation limit, which is the regulatory action level for this site. The results of borehole geophysical log analysis indicate that two of the production wells could have vertically connected intervals where cement bonding in the well annulus is poor. The other production wells have overall good bonding. Temperature logs do not indicate flow behind casing except in the screened interval of one well. Geophysical logs show the Eagle Ford Shale ranges from 147 to 185 feet thick at the site. The Eagle Ford Shale has low permeability and a high plasticity index. These physical characteristics make the Eagle Ford Shale an excellent confining unit.

Texas↗

USGS2025

Protected from Pterygoplichthys? Predicting thermal habitat suitability for nonnative armored catfish in the Suwannee River

Objective Nonnative fishes can modify ecosystems and harm economies when they are introduced to new environments. Climate change is likely to assist the spread and establishment of some nonnative fishes (e.g., warmwater species), but spatiotemporal gaps in water temperature monitoring and modeling may prevent ecologists and managers from forecasting thermal habitat suitability for these taxa. The purpose of this study was to develop a predictive model of winter water temperatures and thermal habitat suitability for two priority nonnative armored catfish, Vermiculated Sailfin Catfish Pterygoplichthys disjunctivus and Orinoco Sailfin Catfish P. multiradiatus , in the Suwannee River, Florida and Georgia. Methods Precipitation- and groundwater-corrected air–water temperature models were developed and evaluated using a model selection procedure to predict water temperatures at four sites in the Suwannee River. These models were chosen because they blend the simplicity of air–water temperature models with the accuracy of hydrometeorological models to create an efficient, economical, management-relevant approach for analyzing and forecasting water temperature. Results Most of the top-performing water temperature models (92%) had precipitation or groundwater corrections to air–water temperature formulations. Projected mean and maximum water temperatures increased as simulated climate change intensified. All four Suwannee River sites studied were projected to be thermally hospitable to the survival of Vermiculated Sailfin Catfish. Lower river sites, noticeably warmer than upper river sites, were conducive to the survival of Orinoco Sailfin Catfish throughout the winter months. The upper river sites were too cold for Orinoco Sailfin Catfish survival in some climate-change scenarios, but the Suwannee River has an abundance of constant-temperature springs that are likely hospitable to Vermiculated Sailfin Catfish and Orinoco Sailfin Catfish throughout the year. Conclusions The findings suggest that winter water temperatures will likely not be a barrier to the survival of Pterygoplichthys catfish in the Suwannee River, amplifying the importance of conservation and management approaches to inhibit their spread and establishment. If the Pterygoplichthys population remains small and isolated and decision makers are able to devote required staff time and resources to managing these species, removal and eradication at local if not broader scales may be reasonable goals. This study provides a water temperature modeling approach that can aid ecologists and managers in prioritizing sites to prevent the introduction, slow the dispersal, eradicate, and control Pterygoplichthys catfish and other nonnative fishes in the Suwannee River and beyond.

Florida, Georgia↗

USGS2025

Preliminary depth to basement modeling at Salton Sea, California

The San Andreas Fault – Imperial Fault (SAF-IF) transtensional step-over zone along the southern margin of the Salton Sea hosts substantial geothermal production and lithium brine resources. Recent volcanism at the Salton Buttes and active seismicity along the SAFIF fault system highlight active tectonic and magmatic processes that pose natural hazards and may impact energy and mineral production. Characterizing the subsurface architecture and extent of concealed alteration associated with this tectono-magmatic system enhances understanding of these active processes, associated hazards, and resources. We have compiled a gravity database, consisting of new and re-processed existing data, from which we have constructed a new isostatic residual gravity anomaly map of the Salton trough. We have used this new gravity dataset together with a compilation of publicly available borehole data to develop new depth to basement inversion models for the region. These depth to basement models help to constrain basin geometries, inform alteration mapping, and reveal variations in basement rocks. Due to the concealed nature of the complex tectonic framework at the Salton trough, it is necessary to utilize geophysical methods for subsurface characterization. These new depth to basement models are a first step toward constructing 2D and 3D geophysical and geologic models of the Imperial Valley and Salton Sea geothermal area. This analysis complements other geophysical initiatives, including magnetotelluric (MT) modeling (Tokmakoff et al., 2024), magnetic mapping (Glen and Earney, 2023, 2024) and potential field modeling, and seismic studies focused on hazard and resource investigations in the Imperial Valley.

California↗

USGS2025

U.S. Geological Survey—Department of the Interior, Region 11, Alaska—2023–24 biennial science report

Introduction U.S. Geological Survey (USGS) Mission—The USGS national mission is to monitor, analyze, and predict the current and evolving dynamics of complex human and natural Earth-system interactions and to deliver actionable information at scales and timeframes relevant to decision makers. Consistent with the national mission, the USGS in Alaska provides timely and objective scientific information to help address issues and inform management decisions across five interconnected focus areas: Energy and Minerals; Geospatial Mapping; Natural Hazards; Water Quality, Streamflow, and Ice Dynamics; and Ecosystems. The USGS in Alaska consists of approximately 350 scientists and support staff working in 3 Alaska-based science centers. USGS science activities are also initiated by the Cooperative Research Unit and USGS centers outside Alaska. In the last 5 years, USGS research in Alaska has produced many scientific benefits resulting from more than 900 publications. Publications relevant to Alaska can be conveniently searched by keyword through the USGS Publications Warehouse at https://pubs.usgs.gov/.

Alaska↗

USGS2025

Understanding market sensitivity: Estimation of supply and demand elasticities for non-fuel minerals

In today’s rapidly changing economic landscape, understanding market responsiveness to price changes and the factors influencing commodity prices has become increasingly relevant. Price elasticities serve as indicators of how variations in market conditions affect supply and demand, providing insights into the sensitivity of commodity markets to price fluctuations. This paper presents a comprehensive analysis of price elasticities of supply and demand for 74 non-fuel mineral commodities including precious metals, base metals, minor metals, and industrial minerals that are utilized across various industries. We employ various econometric techniques, including fixed effects models for panel data and two-stage dynamic ordinary least squares (2S-DOLS) alongside autoregressive distributed lag (ARDL) models for time series analysis, to derive robust estimates of price elasticities. Our findings reveal variability in elasticities among different commodities and indicate that all studied mineral commodities exhibit price inelastic supply and demand in the short run, which we define as one year for the purposes of our analysis, given that the data is all annual. This research provides original estimates of price responsiveness for a wide range of commodities that have not been previously addressed in the literature, thereby enhancing the understanding of market dynamics in the mineral sector. Given that price elasticities can be influenced by factors such as market structure, technological advancements, mining costs, and industry-specific demand drivers, we use variables that serve as proxies for these factors.

Mineral Economics↗

USGS2026

High‐resolution surface deformation and slip distribution observations for the 2023 Kahramanmaraş, Türkiye, earthquake sequence help constrain the rupture process

Splay, or branch, faults are a common geometric feature of earthquake surface ruptures and may provide constraints on the rupture behavior of an earthquake. The 2023 M w 7.8 Pazarcık and M w 7.5 Elbistan, Türkiye, earthquakes are examples of ruptures with multiple small splays, and the Pazarcık earthquake nucleated on a splay fault, the Narlı fault, before rupturing bilaterally on the East Anatolian fault (EAF). Here, we present 3‐m‐resolution surface displacement from subpixel correlation of Planet Dove optical images for the entirety of both ruptures with corresponding surface slip distributions. For a 30‐km‐long study region spanning the Narlı‐EAF intersection, we compare surface slip derived from five data sets with different resolutions (on‐the‐ground, WorldView, Planet Dove, Sentinel‐2, and Sentinel‐1) to elucidate complementary information. In addition, we integrate information from the surface expression of faulting with published dynamic rupture simulations and rupture process studies to constrain a rupture evolution for the Pazarcık earthquake that is consistent across data sets. This work highlights the complementary nature of disparate surface slip data sets and the role that high‐resolution surface displacement information, including from fault splays, can play in constraining nonunique rupture models and refining understanding of the earthquake rupture process.

Bulletin of the Seismological Society of America↗

USGS2026

Multiple-well monitoring site adjacent to the Midway- Sunset and Buena Vista Oil Fields, Kern County, California

Groundwater quality in and around oil fields in the Southern San Joaquin Valley is of interest to many California residents that rely heavily on groundwater for domestic, commercial, and agricultural use. To help assess the effects of historical oil-field activities and natural geologic sources on groundwater near the southwest margins of the Kern County Groundwater Subbasin, a multiple-well monitoring site was installed near the administrative boundary between the Midway-Sunset and Buena Vista Oil Fields in Kern County, California. The installation of the Midway-Sunset Buena Vista multiple-well monitoring site (MSBV) supports regional analysis of the relations of oil and gas sources to groundwater quality by providing information about the geology, hydrology, geophysical properties, and water quality of the alluvial and upper Tulare aquifers in areas where groundwater data were limited. Data collected from the site included drill cuttings, whole core samples, sidewall core samples, mud-gas analysis, borehole geophysical logs, depth to water measurements, and water quality samples. Whole cores were scanned using dual energy computed tomography. Subsamples of selected cores were analyzed for density, porosity, specific retention, and bulk minerology. Thin sections of the subsamples were prepared, photographed, and examined. Two samples were analyzed using scanning electron microscope technology to examine the microporosity of diatomite laden sediment. Instrumentation installed in the wells collect hourly depth to water measurements. Analysis of the data show there is 355 feet of alluvium overlying the Tulare Formation at the well site. The contact between the two formations is an aquitard resulting in a perched aquifer in the alluvium and unconfined aquifer in the Tulare Formation. The alluvium is more heterogenous and finer grained than the Tulare Formation resulting in markedly higher porosity in the alluvium compared to the Tulare Formation. Higher specific retention observed in the alluvium is attributed to the finer grained sediment and greater abundance of reworked diatomite (as represented by opal-CT [cristobalite-tridymite]) compared to the Tulare Formation. Total dissolved solids (TDS) approached or exceeded 10,000 milligrams per liter (mg/L) in the alluvium from approximately 176 to 242 feet below land surface and at the top of the Amnicola clay at approximately 670 feet below land surface within the Tulare Formation. Elevated TDS, chloride, and boron concentrations in the alluvium and on top of the Amnicola clay likely reflect groundwater that is mixed with oil-field water. Water chemistry and modern-aged groundwater in the alluvial monitoring well (MSBV #3) are consistent with the oil-field water in the alluvium being derived from documented historical surface disposal of oil-field water upslope (northwest) of the site. Water chemistry and pre-modern groundwater age in the deeper Tulare monitoring well (MSBV #1) on top of the Amnicola clay are consistent with oil-field fluids derived from upslope natural geologic sources or old oil wells that leak in the subsurface. Shallow groundwater in the Tulare (MSBV #2) is not affected by mixing with oil-field sources.

EarthArXiv↗

USGS2026

Widespread landslide activity in an extreme wet season and implications for regional sediment management, eastern San Francisco Bay area, California

Watershed sediment production is expected to increase in a warmer future with more extreme rain, with cascading effects throughout drainage and sediment-transport networks. This study investigated landscape-scale sediment movement in the eastern San Francisco Bay area, California, USA, during the extreme 2016–2017 wet season that brought major rainfall, landslides, and flooding. Mapping 8,928 landslides across a 1,050-km 2 study area revealed new sediment yield of 510–956 t/km 2 , equivalent to denudation of 193–361 mm/ky. These results correspond closely to long-term denudation rates in the northern and central California Coast Ranges, indicating that mass wasting in very wet years dominates long-term sediment mobilization. However, due to long residence times in drainage networks, the 2017 landslides contributed at most ∼1%–2% of the estimated locally derived fluvial sediment transport to San Francisco Bay. Although the amount of sediment mobilized did not threaten municipal water supplies, small rangeland impoundments in this mixed-use landscape lost storage capacity to new sedimentation. Considering regional sediment supply and demand, even the exceptionally large sediment delivery in an extreme wet year cannot meet the need for sediment to accrete tidal wetlands in the bay. To keep pace with rising sea levels, this abnormally high terrestrial sediment input would need to occur in 50 of the next 75 years, an unlikely occurrence due to the prevalence of recent drought years. Shoreline protection and restoration in the bay would need additional sources of sediment, such as through management of dredged sediment through beneficial-reuse programs.

California↗

USGS2024

Aftershock forecasting

Aftershocks can compound the impacts of a major earthquake, disrupting recovery efforts and potentially further damaging weakened buildings and infrastructure. Forecasts of the probability of aftershocks can therefore aid decision-making during earthquake response and recovery. Several countries issue authoritative aftershock forecasts. Most aftershock forecasts are based on simple statistical models that were first developed in the 1980s and remain the best available models. We review these statistical models, and the wide-ranging research to advance aftershock forecasting through better statistical, physical, and machine learning methods. Physics-based forecasts based on mainshock stress changes can sometimes match the statistical models in testing, but don’t yet outperform them. Physical models are also hampered by unsolved problems such as the mechanics of dynamic triggering and the influence of background conditions. Initial work on machine learning forecasts shows promise, and new machine learning earthquake catalogs provide an opportunity to advance all types of aftershock forecasts.

Annual Review of Earth and Planetary Sciences↗