SEARCH · USGS Science

Results for “The Leading Edge”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,663 records · Page 52Linked to original sources

USGS2025

Assimilation of reduced carbon triggers platinum alloy saturation in mafic and ultramafic magmas

It is generally observed that magmatic sulfide ores have higher ratios of Pd/Pt than the mantle-like values of their parental magmas. This discrepancy has defied simple explanation because the partitioning behavior of both elements between sulfide and silicate liquids is very similar. Assimilation of sulfur- and carbon-rich country rocks by mafic and ultramafic magmas is considered a critical, if not essential, step in the formation of magmatic base metal sulfide deposits. Although there is general consensus that the assimilation of external sulfur and carbon promotes sulfide saturation, the effect of carbon assimilation on the solubilities of platinum-group elements in natural S-bearing silicate melt has been overlooked. In this study, we investigate the variations of platinum and palladium solubilities during assimilation of graphite and methane through thermodynamic modeling, in comparison with data from an array of highly distinctive magmatic sulfide ore systems representing ages from Archean to Paleozoic, melt compositions from komatiite to basalt, and magmatic settings including lavas, hypabyssal intrusions, plutonic continental arc roots, and plutonic layered intrusions, namely: Raglan, Norilsk-Talnakh, Lac des Iles, and the J-M Reef of the Stillwater Complex. We model assimilation-fractional crystallization processes to estimate the reduction of oxygen fugacity ( ⁠fO2⁠ ) of the melt due to incorporation of graphite and methane. The simulations show that although Pd remains highly soluble during the progressive assimilation of reduced carbon, Pt solubility decreases significantly as the silicate melt becomes increasingly reduced. With less than 8 % of sediment assimilation, Pt alloy may saturate and then deviate from sulfide-undersaturated silicate melts, concomitantly increasing the Pd/Pt value of the remaining melts of the Raglan and Norilsk-Talnakh systems. For the Lac des Iles and Stillwater systems, a higher extent of assimilation is needed to reach Pt saturation because of the relatively carbon-poor nature of the lower crustal rocks. The assimilation of methane volatiles is shown to be more effective than graphite assimilation, and it provides a pathway to Pt alloy fractionation in the absence of detectable amounts of bulk host-rock assimilation. High Pd/Pt values have been documented in many world-class magmatic sulfide deposits whose parental magmas have demonstrably experienced crustal contamination. Our model suggests that although anomalous Pd/Pt values may be explained by other mechanisms such as incongruent melting of preexisting sulfide or differences in the diffusivities of the metals within achieving equilibration, the assimilation of graphite or methane may play an important role in the global occurrence of magmatic sulfide ores with elevated Pd/Pt values.

Economic Geology↗

USGS2025

Ultralong, supershear rupture of the 2025 Mw 7.7 Mandalay earthquake reveals unaccounted risk

The 28 March 2025 moment magnitude ( M w ) 7.7 earthquake in Mandalay, Burma (Myanmar), ruptured 475 kilometers of the Sagaing Fault, which was more than twice the length predicted by magnitude scaling relationships. Kinematic slip models and observation of a Rayleigh Mach wave that passed through parts of Thailand confirmed that rupture occurred at supershear velocities of greater than 5 kilometers per second. The anomalous length exposed a vast population to violent near-fault shaking. The Mandalay earthquake is a modern analog for the M w 7.9 1906 San Francisco earthquake, another atypically long and fast rupture. Probabilistic seismic hazard analyses use scaling relations that do not account for such long ruptures at moderate magnitudes. This limitation, in conjunction with a likely increased population and infrastructure exposure for atypically long ruptures, contributes to a potential mischaracterization of seismic risk.

Mandalay↗

USGS2025

Groundwater salinity: Applying the specific conductance and water type proxy

Groundwater is increasingly needed for water supplies but may have limited utility in some locations because of its salinity. Salinity, often expressed as total dissolved solid (TDS), is frequently estimated using specific conductance (SC) measurements. However, the commonly used proxy (0.65 multiplied by SC to indicate TDS, common in many handheld meters) can result in inaccurate TDS estimates. First, the TDS–SC relationship is not linear over the entire concentration range of groundwater. Furthermore, the TDS (and salinity)–SC relationships vary substantially depending on the major-ion composition. Here we develop a proxy method utilizing SC and major-ion water type to estimate TDS and salinity specifically for groundwaters. Compared to most surface waters, groundwater tends to have a wider range of salinity (fresh to highly saline) and higher concentrations of bedrock-derived solutes such as carbonate ions, silica, and many other ions. The dataset used to develop the proxies includes water chemistry data from 149,059 discrete groundwater samples. The groundwater proxies, which employ nonlinear log–log relations, utilize five water types (HCO 3 , Cl, Ca-Mg-SO 4 , Na-K-SO 4 , and mixed waters), are accurate (median percent difference between TDS and salinity determined using the proxy compared to discrete measurements was <±0.8%) over a wide range of SC (up to 200 mS/cm), rapid, cost-effective, and can be measured on-site.

Groundwater↗

USGS2025

Mine waste as a potential source of critical minerals and other commodities: Examples from the Four Corners states, USA

The growing demand for critical minerals and other mineral resources has raised concerns about possible supplies of these essential commodities. Mine waste is a potential source of these essential commodities. We compiled a geospatial database of publicly available data of the largest non-fuel mine waste features (>200,000 m 2 in areal extent) in the Four Corners states of the United States, where most of those features are from porphyry Cu deposits. The combined volume of those large porphyry Cu mine waste features is approximately 17 cubic kilometers, 60% of which is ore-related material such as tailings. Using publicly available data on density, grade, and previous recovery values, we estimate the contained endowments of Ag, As, Au, Bi, Cu, Mo, Re, S, Sb, Se, Te, and W. These estimates indicate endowments within ore-related mine wastes are collectively comparable to endowments of giant to supergiant deposits. If fully recovered, these commodities could meet current global demand from less than 1 year (Sb) to more than 200 years (Re), underscoring the enormous untapped resource potential of mine waste.

Arizona, Colorado, New Mexico, Utah↗

USGS2025

Structural analysis of brittle-plastic shear zones in the Sangre de Cristo Range, southern Colorado USA: Superposition of Rio Grande rift extension on Laramide contraction

The Sangre de Cristo Range in southern Colorado exposes some of the deepest Cenozoic structural levels in the Rocky Mountain region, including mylonitic shear zones associated with both the Laramide orogeny and Rio Grande rift. We investigated the relation between Laramide contraction and Rio Grande rift extension with detailed geologic mapping, kinematic analysis, and geochronometry in a 50 km 2 area centered on the Independence Mine shear zone (IMSZ). The 15−100-m-thick IMSZ is one of several shallowly to moderately (∼45° ± 20°) W-SW−dipping brittle-plastic shear zones along the western flank of the range. These shear zones display microstructural evidence of initiation as top-NE contractional mylonite zones, consistent with regional Laramide kinematics, which have been pervasively overprinted by shear fabrics indicating top-SW extensional reactivation. Both top-NE and top-SW shear fabrics involve cataclasis and quartz dislocation creep, although top-SW shear is more commonly localized along phyllosilicate-lined shear bands. Shear zones are hosted predominately within Proterozoic gneiss, and contain abundant chlorite and white mica derived from alteration of hornblende and feldspar, which indicates that weakening driven by fluid reactions played an important role in localizing strain. Extensional overprinting appears to be most pervasive along more steeply dipping portions of shear zones and where secondary phyllosilicates form an interconnected weak phase, which suggests that reactivation was primarily controlled by geometry and rheological contrasts inherited from contraction. One top-SW shear zone adjacent to the IMSZ cuts a late Oligocene gabbro stock, and monazite grains synkinematic with top-SW shear in the IMSZ yielded late Oligocene to Early Miocene U-Th-Pb dates that correspond with initiation of the Rio Grande rift. Reactivation of weak reverse faults may represent an important structural control during initial extension in the middle crust, prior to slip along the high-angle Sangre de Cristo normal fault system.

Colorado↗

USGS2025

Petrogenesis and mineralization potential of the Bradley Peak komatiitic basalts, Wyoming Province

The ca. 2.72 Ga Bradley Peak greenstone terrane in the Wyoming Province contains spinifex- and cumulate-textured komatiitic volcanic rocks that may host Ni-Cu-PGE sulfide mineralization. New whole rock geochemistry classifies these rocks as Al-undepleted komatiitic basalts derived from a parental melt with ~17 wt. % MgO. Isotopic data (Sm-Nd, Re-Os) and REE profiles suggest a plume source and possible assimilation of juvenile footwall volcanic rocks. Calculated sulfur concentrations at sulfide saturation and low-detection PGE geochemistry indicate these magmas did not saturate a sulfide liquid resulting in sulfide mineralization. Although the Bradley Peak komatiitic basalt flows are unlikely to host magmatic sulfide mineralization, they are likely the source of Au for regional orogenic gold deposits.

Wyoming↗

USGS2026

A deep dive into subduction zones and the Japan Trench

Deep beneath the ocean, giant slabs of rock slide beneath one another in areas called subduction zones. These powerful movements shape the planet by building mountains, creating fiery volcanoes, and even causing huge earthquakes. Scientists study subduction zones to understand why these natural events happen and where and how they might occur so we can be better prepared. One important subduction zone is the Japan Trench, where a big earthquake happened in 2011. To learn more about subduction zones, scientists go on ocean drilling expeditions. They sail on research ships, drill into the seafloor, and collect rock samples. These samples help scientists understand what happened in the past and how subduction zones work. In turn, this information helps communities better understand and prepare for future earthquakes.

Frontiers for Young Minds↗

USGS2026

USGS 2025 critical minerals review

The United States Geological Survey (USGS) provides scientific information for the Department of Interior and the nation, consistent with its original mission expressed in the Organic Act of 1879 (43 U.S.C. 31): “the classification of the public lands and examination of the geological structure, mineral resources, and products within and outside the national domain.” Legislation such as the Energy Act of 2020 and the 2022 Infrastructure Investment and Jobs Act (43 USC 31l) and recent executive actions (Executive Orders 14154 , 14153, 14241 Secretary’s Orders 3417, 3418, 3422, 3436) underscore the importance of mineral resources and focus USGS activities on mapping and assessing mineral resources, with a particular focus on those presently identified as critical, both in ground and above ground in mine wastes. This article reviews selected activities and accomplishments by the USGS Mineral Resources Program related to critical minerals in 2025. Highlights include a new List of Critical Minerals, a first-ever national mine waste inventory, international minerals partnerships, mineral resource assessment advancements, and national data collection activities and outcomes of the Earth Mapping Resources Initiative (Earth MRI). The selected contributions are not comprehensive but are intended to demonstrate USGS leadership in critical mineral mapping and assessment, the importance of domestic and global partnerships, and the breadth of research activities that are responsive to national needs and priorities.

Mining Engineering↗

USGS2025

Cave records reveal recent origin of North America’s deepest canyon

We explore how and when Hells Canyon, North America’s deepest river gorge (~2,400 m deep), formed, addressing these fundamental questions first posed by W. Lindgren [ The Gold Belt of the Blue Mountains of Oregon (1901)]. Existing hypotheses about the canyon’s formation and timing of incision remain speculative due to a lack of direct constraints and geomorphic analysis in the canyon. Herein, we combine cosmogenic nuclide dating of cave-bound river deposits, river profile analysis, and numerical modeling to provide the first direct age constraints and systematic analysis of incision processes at work in Hells Canyon. Our study reveals a significant drainage capture triggered rapid incision at ~2.1 ± 1.0 Ma, establishing the Snake River’s modern route into the Columbia River system. The increased drainage area and subsequent increase in stream power resulted in the rapid incision of Hells Canyon and the formation of tributary knickpoints (KPs) that decrease in elevation away from the capture location. Cosmogenic dating of cave deposits indicates incision rates increased from ~0.01 to ~0.16 mm y −1 . Numerical modeling of the stream capture supports these observations, demonstrating how abrupt drainage area increase drives rapid river incision. Our findings from Hells Canyon provide a well-constrained example of how drainage capture can dramatically shape the evolution of a major river gorge.

Idaho, Oregon, Washington↗

USGS2024

Forecasting storm-induced coastal flooding for 21st century sea-level rise scenarios in the Hawaiian, Mariana, and American Samoan Islands

Oceanographic, coastal engineering, ecologic, and geospatial data and tools were combined to evaluate the increased risks of storm-induced coastal flooding in the populated Hawaiian, Mariana, and American Samoan Islands as a result of climate change and sea-level rise. We followed a hybrid (dynamical and statistical) downscaling approach to map flooding due to waves and storm surge at 10-square meter resolution along all 1,870 kilometers of these islands’ coastlines for annual (1-year), 20-year, and 100-year return-interval storm events and +0.00 meter (m), +0.25 m, +0.50 m, +1.00 m, +1.50 m, +2.00 m, and +3.00 m sea-level rise scenarios. We quantified the coastal flood depths and extents using the latest climate forcing from Intergovernmental Panel for Climate Change’s Sixth Assessment Report Coupled Model Intercomparison Project. The data generated using these methods provide stakeholders and decision makers with a spatially explicit, rigorous valuation of how, where, and when climate change and sea-level rise increase coastal storm-induced flooding to help identify areas where management and (or) restoration could potentially help reduce the risk to, and increase the resiliency of, the coastal communities in the populated Hawaiian, Mariana, and American Samoan Islands.

Hawaii↗

USGS2024

Radiogenic strontium- and uranium-isotope tracers of water-rock interactions and hydrothermal flow in the Upper Geyser Basin, Yellowstone Plateau Volcanic Field, USA

Natural radiogenic isotopes (primarily 87 Sr/ 86 Sr) from hot springs in the Upper Geyser Basin of the Yellowstone Plateau volcanic field and associated rocks were used to evaluate groundwater flow patterns, water-rock reactions, and the extent of mixing between various groundwater sources. Thermal waters have very low uranium concentrations and 234 U/ 238 U activity ratios near 1.0, which limit their utility as tracers in this reducing setting. Thermal waters have higher Sr concentrations (<22 ng/g) and a wide range of 87 Sr/ 86 Sr values that vary both temporally at individual discharge sites and between adjacent springs, indicating that conduits tap different subsurface reservoirs to varying degrees. Sr from local rhyolites have 87 Sr/ 86 Sr compositions that bound the range of values observed in groundwater throughout the basin. Non-boiling springs on the west flank of the basin discharge water with low 87 Sr/ 86 Sr consistent with flow through young volcanic rocks exposed at the surface. Boiling springs in the central basin have higher 87 Sr/ 86 Sr values reflecting interactions with older, more radiogenic volcanic rocks. Variability in upwelling thermal waters requires mixing with a low 87 Sr/ 86 Sr component derived from young lava or glacial sediments, or more likely, from deeper sources of hot groundwater circulating through buried Lava Creek Tuff having intermediate 87 Sr/ 86 Sr. Isotope data constrain basin-wide output of thermal water to 110–140 kg·s −1 . Results underscore the utility of radiogenic Sr isotopes as valuable tracers of hydrothermal flow patterns and improve the understanding of temperature-dependent water-rock reactions in one of the largest continental hydrothermal systems on Earth.

Wyoming↗

USGS1976

Water-quality study of a reach of the Merced River in Yosemite National Park and vicinity, California, April 1973 through September 1974

A 25-mile (40-kilometre) reach of the Merced River was studied to provide the National Park Service with water-quality data prior to the operation of a new sewage-treatment plant. Data were collected periodically at four Merced River and two inflow stations. Discharge varied seasonally with highest flow occurring at the time of spring snowmelt runoff. Lowest flow occurred during late summer, coinciding with high park visitor use and elevated water temperature. Water-quality variables investigated were discharge, temperature, major chemical constituents, selected trace metals, specific conductance, suspended sediment, turbidity, dissolved oxygen, pH, alkalinity, carbon dioxide, total organic carbon, nitrogen, phosphorus, algal growth potential, coliform bacteria, periphyton, and benthic invertebrates. Diel measurements were made at some stations to delineate daily fluctuations in selected water-quality variables. Results indicate that water in the reach of the Merced River studied was of good quality. The river had low concentrations of dissolved solids (8 to 41 milligrams per litre) and low alkalinity values (2 to 24 milligrams per litre of alkalinity as CaCO 3 ). Mean concentrations of nitrogen and phosphorus were highest in the Merced River at Rancheria Flat. Algal growth potential tests showed that phosphorus was limiting algal growth at Happy Isles Bridge, El Capitan Bridge, and South Fork Merced River, whereas nitrogen was limiting growth at Rancheria Flat. Input of excessive nitrogen and phosphorus concentrations in the Merced River during the summer low-flow period, and mixing with warm tributary inflow could cause excessive algal growth and production. The algal types found were diatoms, green algae, and blue-green algae. Biomass/chlorophyll a ratios in the Merced River were low (0.3 to 7.7). Benthic invertebrates consisted chiefly of Diptera, Ephemeroptera, and Plecoptera.

California↗

USGS2025

Tracking diagenetic alteration of magnetic susceptibility in thrust ridge and slope basin sediments of the Cascadia margin (ODP Sites 1249 and 1252; IODP Site U1325)

We investigated sediment core records from the Cascadia Margin (Ocean Drilling Program Sites 1249 and 1252 at Hydrate Ridge; Integrated Ocean Drilling Program Site U1325 offshore Vancouver Island) using a Zr/Rb heavy mineral proxy from X-ray fluorescence (XRF) core scanning to identify intervals of primary detrital magnetic susceptibility (κ) and predict intervals where diagenesis caused magnetite dissolution by hydrogen sulfide. We also measured total sulfur (TS) content, grain size distributions, total organic carbon (TOC) content, and the magnetic mineral assemblage to further constrain the role of diagenesis on κ. Understanding how κ can be used to better characterize the varied effects of detrital and diagenetic signals in marine settings is important for understanding biogeochemical cycling and records of paleoenvironmental change. The upper 100 m of slope basin Site 1252 contains multiple intervals (> 90 m total) of decreased κ correlated with elevated TS content, consistent with dissolution of magnetite and precipitation of pyrite, iron monosulfides, and/or elemental sulfur. Similarly at the other slope basin site, Site U1325, κ is lower and TS is elevated in the interval between 24 and 51 mbsf, due to sulfide formation. At both slope basin sites, these low κ intervals correspond with high TOC, suggesting the possibility that organoclastic sulfate reduction (OSR) is likely a major driver of diagenetic alteration of κ at these sites. High TS:TOC ratios at Site U1325 suggests anaerobic oxidation of methane (AOM) during sulfate-methane transition zone (SMTZ) migration may have contributed to alteration of κ. In contrast, within the upper 90 m of Site 1249, a methane seep site at the summit of Hydrate Ridge, κ is almost entirely altered by diagenetic processes, with much of the low κ explained by a high degree of iron sulfide formation, while some intervals are affected by precipitation of magnetic iron sulfides that maintain or even increase κ. The presence of abundant methane seepage and gas hydrate as well as chemosynthetic seafloor fauna at this site, suggests that sulfide is released to the water column and AOM, rather than OSR, drives diagenetic alteration of κ at this site. Overall, the slope basin sites show episodic variation of κ that is influenced by TOC content, likely driven by changes in marine primary productivity and sedimentation rate, while the seep site shows consistently altered κ with lower TS content and no correlation with TOC. Methane seep environments likely experience loss of hydrogen sulfide to the water column and oxidation of hydrogen sulfide by seafloor seep fauna, which limits the amount of solid phase sulfur (pyrite, iron monosulfides, elemental sulfur) that can be precipitated within the sediments. In contrast, the migration of a buried SMTZ at slope basin sites results in enhanced sulfur precipitation within the sediments. This integrated magnetic and geochemical approach reveals the diagenetic production pathway and residence time of sulfide with the sediment column ultimately controls the style and degree of diagenetic loss of κ in marine sediments. This approach works best in environments with unaltered reference intervals/sites, consistent magnetic mineralogy, and clay-to-silt grain sizes.

Cascadia margin, Pacific Ocean↗

USGS2026

Opportunities for the U.S. Geological Survey’s National Seismic Hazard Model to improve seismic risk assessment of critical infrastructure.

As fragility and risk modeling techniques and computational capabilities evolve, complemented by moving toward more routine and systematic seismic risk assessment of all buildings and critical infrastructure, the authors pose a few critical questions to investigate how the U.S. Geological Survey (USGS) National Seismic Hazard Models (NSHMs) can be used and enhanced further to serve such issues. In this paper, we use three examples from multiple sectors to (1) identify the role of USGS NSHMs in evaluating seismic risks to critical infrastructure, (2) quantify potential impacts from NSHM enhancements (i.e., [i] hazard curves for the vertical component of ground motion, [ii] stochastic event sets, and [iii] maps of probabilistic ground failure hazards), and (3) clarify the feasibility of relevant NSHM improvements. We illuminate that NSHMs are commonly used in location-specific performance assessments, whereas earthquake effects on critical infrastructure can be widespread across large geospatial regions. Further, we found that without the NSHM extensions considered here, risk can be severely underestimated, e.g., neglecting ground failure hazards can underestimate regional loss by a factor of two or more. Although many challenges remain, we developed example prototypes to clarify the feasibility of the NSHM extensions, which can facilitate improved management of risks to critical infrastructure.

Earthquake Spectra Journal↗

USGS2025

Dating a medieval tsunami with uranium-series techniques on Caribbean corals

Uranium-series dates from coral boulders constrain the timing of a medieval tsunami from the Puerto Rico Trench. Previously reported evidence for this tsunami includes hundreds of coral boulders that came to rest hundreds of meters inland on Anegada, British Virgin Islands. New U-series dates on these coral boulders provide limiting dates for the tsunami. The narrowest limits were by dating interior bands of a coral that retains the hemispherical form of a living coral colony, and which include adjustments for the number of annual density band couplets between the dated samples and the boulder exteriors. By those limits, the tsunami dates between 1381 and 1391 CE, and likely occurred during summer or fall. The tsunami is important as the only reported sign that the eastern Puerto Rico Trench has produced a great earthquake. The dating may aid in defining the earthquake source and in communicating tsunami hazards.

British Virgin Islands, Puerto Rico↗

USGS2025

Rapid fault healing from cementation controls the dynamics of deep slow slip and tremor

Despite its status as one of the most important discoveries in geophysics, the physical mechanism(s) responsible for slow slip events (SSEs) are not well understood. Here, we synthesize observations of deep SSEs in the Cascadia Subduction Zone and argue that rapid, cohesive fault strengthening may control the dynamics of deep SSEs. Cohesive strength is frequently ignored in constitutive laws used to describe fault rheology in numerical simulations of earthquakes and SSEs alike. To demonstrate its importance, we perform and analyze a suite of petrological experiments that simulate fault healing under representative pressure and temperature conditions. We show that significant cohesive strength recovery caused by dissolution-precipitation processes occurs on timescales of just a few hours. Together, our experimental and observational results support the idea that cohesion is a key component of fault strength under SSE conditions and highlight the need for its inclusion in both future experiments and numerical models of fault slip.

British Columbia, Washington↗

USGS2025

Accurate simulation of flow through dipping aquifers with MODFLOW 6 using enhanced cell connectivity

In simulations of groundwater flow through dipping aquifers, layers of model cells are often “deformed” to follow the top and bottom elevations of the aquifers. When this approach is used in MODFLOW, adjacent cells within the same model layer are vertically offset from one another, and the standard conductance-based (two-point) formulation for flow between cells does not rigorously account for these offsets. The XT3D multi-point flow formulation in MODFLOW 6 is designed to account for geometric irregularities in the grid, including vertical offsets, and to provide accurate results for both isotropic and anisotropic groundwater flow. A recent study evaluated the performance of the standard formulation and XT3D using a simple, synthetic benchmark model of a steeply dipping aquifer. Although XT3D generally improved the accuracy of flow simulations relative to the standard formulation as expected, neither formulation produced accurate flows in cases that involved large vertical offsets. In this paper, we explain that the inability of XT3D to produce accurate flows in the steeply dipping aquifer benchmark was not due to an inherent limitation of the flow formulation, but rather to the limited cell connectivity inherent in the most commonly used discretization packages in MODFLOW 6. Furthermore, we demonstrate that XT3D is able to produce the expected accuracy when adequate cell connectivity is introduced using MODFLOW's unstructured grid type and the aquifer is discretized vertically using at least two model layers.

Groundwater↗

USGS2025

Wetlands, groundwater and seasonality influence the spatial distribution of stream chemistry in a low-relief catchment

Evaluating stream water chemistry patterns provides insight into catchment ecosystem and hydrologic processes. Spatially distributed patterns and controls of stream solutes are well-established for high-relief catchments where solute flow paths align with surface topography. However, the controls on solute patterns are poorly constrained for low-relief catchments where hydrogeologic heterogeneities and river corridor features, like wetlands, may influence water and solute transport. Here, we provide a data set of solute patterns from 58 synoptic surveys across 28 sites and over 32 months in a low-relief wetland-rich catchment to determine the major surface and subsurface controls along with wetland influence across the catchment. In this low-relief catchment, the expected wetland storage, processing, and transport of solutes is only apparent in solute patterns of the smallest subcatchments. Meanwhile, downstream seasonal and wetland influence on observed chemistry can be masked by large groundwater contributions to the main stream channel. These findings highlight the importance of incorporating variable groundwater contributions into catchment-scale studies for low-relief catchments, and that understanding the overall influence of wetlands on stream chemistry requires sampling across various spatial and temporal scales. Therefore, in low-relief wetland-rich catchments, given the mosaic of above and below ground controls on stream solutes, modeling efforts may need to include both surface and subsurface hydrological data and processes.

Michigan↗