USGS Science⌕ Search

SEARCH · USGS Science

Results for “Sensors”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources
USGS2010

Identification of plant species by using high spatial and spectral resolution thermal infrared (8.0–13.5 μm) imagery

High spatial and spectral resolution thermal infrared imagery (8.0–13.5 μm) from the SEBASS airborne sensor was used to analyze and map tree canopy spectral features at the State Arboretum of Virginia, near Boyce, Virginia. Fifty tree species were analyzed and about half were directly identified with varying degrees of success on the basis of spectral matched filtering that utilized laboratory-measured leaf spectra as the target signatures. Spectral averages of pixels extracted from SEBASS emissivity data compared favorably with laboratory spectra of leaves collected from individual tree species. Best results were obtained from species having relatively strong spectral contrast, wide and flat leaves, closed planophile canopies, and/or large canopy areas. Tree species having small leaves or unfavorable leaf orientations showed spectral attenuation likely resulting from cavity blackbody effects. Increased spatial resolution and better image calibration and atmospheric correction might lead to further improvements in thermal infrared plant species identification.

Remote Sensing of the Environment↗
USGS2011

A simple and effective method for filling gaps in Landsat ETM+ SLC-off images

The scan-line corrector (SLC) of the Landsat 7 Enhanced Thematic Mapper Plus (ETM+) sensor failed in 2003, resulting in about 22% of the pixels per scene not being scanned. The SLC failure has seriously limited the scientific applications of ETM+ data. While there have been a number of methods developed to fill in the data gaps, each method has shortcomings, especially for heterogeneous landscapes. Based on the assumption that the same-class neighboring pixels around the un-scanned pixels have similar spectral characteristics, and that these neighboring and un-scanned pixels exhibit similar patterns of spectral differences between dates, we developed a simple and effective method to interpolate the values of the pixels within the gaps. We refer to this method as the Neighborhood Similar Pixel Interpolator (NSPI). Simulated and actual SLC-off ETM+ images were used to assess the performance of the NSPI. Results indicate that NSPI can restore the value of un-scanned pixels very accurately, and that it works especially well in heterogeneous regions. In addition, it can work well even if there is a relatively long time interval or significant spectral changes between the input and target image. The filled images appear reasonably spatially continuous without obvious striping patterns. Supervised classification using the maximum likelihood algorithm was done on both gap-filled simulated SLC-off data and the original "gap free" data set, and it was found that classification results, including accuracies, were very comparable. This indicates that gap-filled products generated by NSPI will have relevance to the user community for various land cover applications. In addition, the simple principle and high computational efficiency of NSPI will enable processing large volumes of SLC-off ETM+ data.

Remote Sensing of Environment↗
USGS2012

High-frequency remote monitoring of large lakes with MODIS 500 m imagery

Satellite-based remote monitoring programs of regional lake water quality largely have relied on Landsat Thematic Mapper (TM) owing to its long image archive, moderate spatial resolution (30 m), and wide sensitivity in the visible portion of the electromagnetic spectrum, despite some notable limitations such as temporal resolution (i.e., 16 days), data pre-processing requirements to improve data quality, and aging satellites. Moderate-Resolution Imaging Spectroradiometer (MODIS) sensors on Aqua/Terra platforms compensate for these shortcomings, although at the expense of spatial resolution. We developed and evaluated a remote monitoring protocol for water clarity of large lakes using MODIS 500 m data and compared MODIS utility to Landsat-based methods. MODIS images captured during May–September 2001, 2004 and 2010 were analyzed with linear regression to identify the relationship between lake water clarity and satellite-measured surface reflectance. Correlations were strong ( R ² = 0.72–0.94) throughout the study period; however, they were the most consistent in August, reflecting seasonally unstable lake conditions and inter-annual differences in algal productivity during the other months. The utility of MODIS data in remote water quality estimation lies in intra-annual monitoring of lake water clarity in inaccessible, large lakes, whereas Landsat is more appropriate for inter-annual, regional trend analyses of lakes ≥ 8 ha. Model accuracy is improved when ancillary variables are included to reflect seasonal lake dynamics and weather patterns that influence lake clarity. The identification of landscape-scale drivers of regional water quality is a useful way to supplement satellite-based remote monitoring programs relying on spectral data alone.

Remote Sensing of Environment↗
USGS2013

Assessment of the NASA-USGS Global Land Survey (GLS) Datasets

The Global Land Survey (GLS) datasets are a collection of orthorectified, cloud-minimized Landsat-type satellite images, providing near complete coverage of the global land area decadally since the early 1970s. The global mosaics are centered on 1975, 1990, 2000, 2005, and 2010, and consist of data acquired from four sensors: Enhanced Thematic Mapper Plus, Thematic Mapper, Multispectral Scanner, and Advanced Land Imager. The GLS datasets have been widely used in land-cover and land-use change studies at local, regional, and global scales. This study evaluates the GLS datasets with respect to their spatial coverage, temporal consistency, geodetic accuracy, radiometric calibration consistency, image completeness, extent of cloud contamination, and residual gaps. In general, the three latest GLS datasets are of a better quality than the GLS-1990 and GLS-1975 datasets, with most of the imagery (85%) having cloud cover of less than 10%, the acquisition years clustered much more tightly around their target years, better co-registration relative to GLS-2000, and better radiometric absolute calibration. Probably, the most significant impediment to scientific use of the datasets is the variability of image phenology (i.e., acquisition day of year). This paper provides end-users with an assessment of the quality of the GLS datasets for specific applications, and where possible, suggestions for mitigating their deficiencies.

Remote Sensing of Environment↗
USGS2013

Hyperspectral versus multispectral crop-productivity modeling and type discrimination for the HyspIRI mission

Precise monitoring of agricultural crop biomass and yield quantities is critical for crop production management and prediction. The goal of this study was to compare hyperspectral narrowband (HNB) versus multispectral broadband (MBB) reflectance data in studying irrigated cropland characteristics of five leading world crops (cotton, wheat, maize, rice, and alfalfa) with the objectives of: 1. Modeling crop productivity, and 2. Discriminating crop types. HNB data were obtained from Hyperion hyperspectral imager and field ASD spectroradiometer, and MBB data were obtained from five broadband sensors: Landsat-7 Enhanced Thematic Mapper Plus (ETM +), Advanced Land Imager (ALI), Indian Remote Sensing (IRS), IKONOS, and QuickBird. A large collection of field spectral and biophysical variables were gathered for the 5 crops in Central Asia throughout the growing seasons of 2006 and 2007. Overall, the HNB and hyperspectral vegetation index (HVI) crop biophysical models explained about 25% greater variability when compared with corresponding MBB models. Typically, 3 to 7 HNBs, in multiple linear regression models of a given crop variable, explained more than 93% of variability in crop models. The evaluation of λ 1 (400–2500 nm) versus λ 2 (400–2500 nm) plots of various crop biophysical variables showed that the best two-band normalized difference HVIs involved HNBs centered at: (i) 742 nm and 1175 nm (HVI742-1175), (ii) 1296 nm and 1054 nm (HVI1296-1054), (iii) 1225 nm and 697 nm (HVI1225-697), and (iv) 702 nm and 1104 nm (HVI702-1104). Among the most frequently occurring HNBs in various crop biophysical models, 74% were located in the 1051–2331 nm spectral range, followed by 10% in the moisture sensitive 970 nm, 6% in the red and red-edge (630–752 nm), and the remaining 10% distributed between blue (400–500 nm), green (501–600 nm), and NIR (760–900 nm). Discriminant models, used for discriminating 3 or 4 or 5 crop types, showed significantly higher accuracies when using HNBs (> 90%) over MBBs data (varied between 45 and 84%). Finally, the study highlighted 29 HNBs of Hyperion that are optimal in the study of agricultural crops and potentially significant to the upcoming NASA HyspIRI mission. Determining optimal and redundant bands for a given application will help overcoming the Hughes' phenomenon (or curse of high dimensionality of data).

Syr Darya River Basin↗
USGS2014

Rapid dispersal of saltcedar (Tamarix spp.) biocontrol beetles (Diorhabda carinulata) on a desert river detected by phenocams, MODIS imagery and ground observations

We measured the rate of dispersal of saltcedar leaf beetles ( Diorhabda carinulata ), a defoliating insect released on western rivers to control saltcedar shrubs ( Tamarix spp.), on a 63 km reach of the Virgin River, U.S. Dispersal was measured by satellite imagery, ground surveys and phenocams. Pixels from the Moderate Resolution Imaging Spectrometer (MODIS) sensors on the Terra satellite showed a sharp drop in NDVI in midsummer followed by recovery, correlated with defoliation events as revealed in networked digital camera images and ground surveys. Ground surveys and MODIS imagery showed that beetle damage progressed downstream at a rate of about 25 km yr −1 in 2010 and 2011, producing a 50% reduction in saltcedar leaf area index and evapotranspiration by 2012, as estimated by algorithms based on MODIS Enhanced Vegetation Index values and local meteorological data for Mesquite, Nevada. This reduction is the equivalent of 10.4% of mean annual river flows on this river reach. Our results confirm other observations that saltcedar beetles are dispersing much faster than originally predicted in pre-release biological assessments, presenting new challenges and opportunities for land, water and wildlife managers on western rivers. Despite relatively coarse resolution (250 m) and gridding artifacts, single MODIS pixels can be useful in tracking the effects of defoliating insects in riparian corridors.

Arizona, Nevada↗
USGS2014

Landsat-8: Science and product vision for terrestrial global change research

Landsat 8, a NASA and USGS collaboration, acquires global moderate-resolution measurements of the Earth's terrestrial and polar regions in the visible, near-infrared, short wave, and thermal infrared. Landsat 8 extends the remarkable 40 year Landsat record and has enhanced capabilities including new spectral bands in the blue and cirrus cloud-detection portion of the spectrum, two thermal bands, improved sensor signal-to-noise performance and associated improvements in radiometric resolution, and an improved duty cycle that allows collection of a significantly greater number of images per day. This paper introduces the current (2012–2017) Landsat Science Team's efforts to establish an initial understanding of Landsat 8 capabilities and the steps ahead in support of priorities identified by the team. Preliminary evaluation of Landsat 8 capabilities and identification of new science and applications opportunities are described with respect to calibration and radiometric characterization; surface reflectance; surface albedo; surface temperature, evapotranspiration and drought; agriculture; land cover, condition, disturbance and change; fresh and coastal water; and snow and ice. Insights into the development of derived ‘higher-level’ Landsat products are provided in recognition of the growing need for consistently processed, moderate spatial resolution, large area, long-term terrestrial data records for resource management and for climate and global change studies. The paper concludes with future prospects, emphasizing the opportunities for land imaging constellations by combining Landsat data with data collected from other international sensing systems, and consideration of successor Landsat mission requirements.

Remote Sensing of Environment↗
USGS2014

Marsh dieback, loss, and recovery mapped with satellite optical, airborne polarimetric radar, and field data

Landsat Thematic Mapper and Satellite Pour l'Observation de la Terre (SPOT) satellite based optical sensors, NASA Uninhabited Aerial Vehicle synthetic aperture radar (UAVSAR) polarimetric SAR (PolSAR), and field data captured the occurrence and the recovery of an undetected dieback that occurred between the summers of 2010, 2011, and 2012 in the Spartina alterniflora marshes of coastal Louisiana. Field measurements recorded the dramatic biomass decrease from 2010 to 2011 and a biomass recovery in 2012 dominated by a decrease of live biomass, and the loss of marsh as part of the dieback event. Based on an established relationship, the near-infrared/red vegetation index (VI) and site-specific measurements delineated a contiguous expanse of marsh dieback encompassing 6649.9 ha of 18,292.3 ha of S. alterniflora marshes within the study region. PolSAR data were transformed to variables used in biophysical mapping, and of this variable suite, the cross-polarization HV (horizontal send and vertical receive) backscatter was the best single indicator of marsh dieback and recovery. HV backscatter exhibited substantial and significant changes over the dieback and recovery period, tracked measured biomass changes, and significantly correlated with the live/dead biomass ratio. Within the context of regional trends, both HV and VI indicators started higher in pre-dieback marshes and exhibited substantially and statistically higher variability from year to year than that exhibited in the non-dieback marshes. That distinct difference allowed the capturing of the S. alterniflora marsh dieback and recovery; however, these changes were incorporated in a regional trend exhibiting similar but more subtle biomass composition changes.

Louisiana↗
USGS2016

Evaluating Landsat 8 evapotranspiration for water use mapping in the Colorado River Basin

Evapotranspiration (ET) mapping at the Landsat spatial resolution (100 m) is essential to fully understand water use and water availability at the field scale. Water use estimates in the Colorado River Basin (CRB), which has diverse ecosystems and complex hydro-climatic regions, will be helpful to water planners and managers. Availability of Landsat 8 images, starting in 2013, provides the opportunity to map ET in the CRB to assess spatial distribution and patterns of water use. The Operational Simplified Surface Energy Balance (SSEBop) model was used with 528 Landsat 8 images to create seamless monthly and annual ET estimates at the inherent 100 m thermal band resolution. Annual ET values were summarized by land use/land cover classes. Croplands were the largest consumer of “blue” water while shrublands consumed the most “green” water. Validation using eddy covariance (EC) flux towers and water balance approaches showed good accuracy levels with R 2 ranging from 0.74 to 0.95 and the Nash–Sutcliffe model efficiency coefficient ranging from 0.66 to 0.91. The root mean square error (and percent bias) ranged from 0.48 mm (13%) to 0.60 mm (22%) for daily (days of satellite overpass) ET and from 7.75 mm (2%) to 13.04 mm (35%) for monthly ET. The spatial and temporal distribution of ET indicates the utility of Landsat 8 for providing important information about ET dynamics across the landscape. Annual crop water use was estimated for five selected irrigation districts in the Lower CRB where annual ET per district ranged between 681 mm to 772 mm. Annual ET by crop type over the Maricopa Stanfield irrigation district ranged from a low of 384 mm for durum wheat to a high of 990 mm for alfalfa fields. A rainfall analysis over the five districts suggested that, on average, 69% of the annual ET was met by irrigation. Although the enhanced cloud-masking capability of Landsat 8 based on the cirrus band and utilization of the Fmask algorithm improved the removal of contaminated pixels, the ability to reliably estimate ET over clouded areas remains an important challenge. Overall, the performance of Landsat 8 based ET compared to available EC datasets and water balance estimates for a complex basin such as the CRB demonstrates the potential of using Landsat 8 for annual water use estimation at a national scale. Future efforts will focus on (a) use of consistent methodology across years, (b) integration of multiple sensors to maximize images used, and (c) employing cloud-computing platforms for large scale processing capabilities.

Arizona, California, Colorado, Nevada, New Mexico,↗
USGS2016

Landsat 8 and ICESat-2: Performance and potential synergies for quantifying dryland ecosystem vegetation cover and biomass

The Landsat 8 mission provides new opportunities for quantifying the distribution of above-ground carbon at moderate spatial resolution across the globe, and in particular drylands. Furthermore, coupled with structural information from space-based and airborne laser altimetry, Landsat 8 provides powerful capabilities for large-area, long-term studies that quantify temporal and spatial changes in above-ground biomass and cover. With the planned launch of ICESat-2 in 2017 and thus the potential to couple Landsat 8 and ICESat-2 data, we have unprecedented opportunities to address key challenges in drylands, including quantifying fuel loads, habitat quality, biodiversity, carbon cycling, and desertification. In this study, we explore the strengths of Landsat 8's Operational Land Imager (OLI) in estimating vegetation structure in a dryland ecosystem, and compare these results to Landsat 5's Thematic Mapper (TM). We also demonstrate the potential of OLI when coupled with light detection and ranging (lidar) in estimating vegetation cover and biomass in a dryland ecosystem. The OLI and TM predictions were similarly positive, indicating data from these sensors may be used in tandem for long-term time-series analysis. Results indicate shrub and herbaceous cover are well predicted with multi-temporal OLI data, and a combination of OLI and lidar derivatives improves most of these estimates and reduces uncertainty. For example, significant improvements were made for shrub cover (R 2 = 0.64 and 0.78 using OLI only and both OLI and lidar data, respectively). Importantly, a time series of OLI, with some improvement from lidar, provides strong estimates of herbaceous cover (68% of the variance is explained with OLI alone). In contrast, OLI data explain roughly 59% of the variance in total shrub biomass, however approximately 71% of the variance is explained when combined with lidar derivatives. To estimate the potential synergies of OLI and ICESat-2 we used simulated ICESat-2 photon data to predict vegetation structure. In a shrubland environment with a vegetation mean height of 1 m and mean vegetation cover of 33%, vegetation photons are able to explain nearly 50% of the variance in vegetation height. These results, and those from a comparison site, suggest that a lower detection threshold of ICESat-2 may be in the range of 30% canopy cover and roughly 1 m height in comparable dryland environments and these detection thresholds could be used to combine future ICESat-2 photon data with OLI spectral data for improved vegetation structure. Overall, the synergistic use of Landsat 8 and ICESat-2 may improve estimates of above-ground biomass and carbon storage in drylands that meet these minimum thresholds, increasing our ability to monitor drylands for fuel loading and the potential to sequester carbon.

Remote Sensing of Environment↗
USGS2017

UAV lidar and hyperspectral fusion for forest monitoring in the southwestern USA

Forest vegetation classification and structure measurements are fundamental steps for planning, monitoring, and evaluating large-scale forest changes including restoration treatments. High spatial and spectral resolution remote sensing data are critically needed to classify vegetation and measure their 3-dimensional (3D) canopy structure at the level of individual species. Here we test high-resolution lidar, hyperspectral, and multispectral data collected from unmanned aerial vehicles (UAV) and demonstrate a lidar-hyperspectral image fusion method in treated and control forests with varying tree density and canopy cover as well as in an ecotone environment to represent a gradient of vegetation and topography in northern Arizona, U.S.A. The fusion performs better (88% overall accuracy) than either data type alone, particularly for species with similar spectral signatures, but different canopy sizes. The lidar data provides estimates of individual tree height ( R 2 = 0.90; RMSE = 2.3 m) and crown diameter ( R 2 = 0.72; RMSE = 0.71 m) as well as total tree canopy cover ( R 2 = 0.87; RMSE = 9.5%) and tree density ( R 2 = 0.77; RMSE = 0.69 trees/cell) in 10 m cells across thin only, burn only, thin-and-burn, and control treatments, where tree cover and density ranged between 22 and 50% and 1–3.5 trees/cell, respectively. The lidar data also produces highly accurate digital elevation model (DEM) ( R 2 = 0.92; RMSE = 0.75 m). In comparison, 3D data derived from the multispectral data via structure-from-motion produced lower correlations with field-measured variables, especially in dense and structurally complex forests. The lidar, hyperspectral, and multispectral sensors, and the methods demonstrated here can be widely applied across a gradient of vegetation and topography for monitoring landscapes undergoing large-scale changes such as the forests in the southwestern U.S.A.

Arizona↗
USGS2017

Validation of the USGS Landsat Burned Area Essential Climate Variable (BAECV) across the conterminous United States

The Landsat Burned Area Essential Climate Variable (BAECV), developed by the U.S. Geological Survey (USGS), capitalizes on the long temporal availability of Landsat imagery to identify burned areas across the conterminous United States (CONUS) (1984–2015). Adequate validation of such products is critical for their proper usage and interpretation. Validation of coarse-resolution products often relies on independent data derived from moderate-resolution sensors (e.g., Landsat). Validation of Landsat products, in turn, is challenging because there is no corresponding source of high-resolution, multispectral imagery that has been systematically collected in space and time over the entire temporal extent of the Landsat archive. Because of this, comparison between high-resolution images and Landsat science products can help increase user's confidence in the Landsat science products, but may not, alone, be adequate. In this paper, we demonstrate an approach to systematically validate the Landsat-derived BAECV product. Burned area extent was mapped for Landsat image pairs using a manually trained semi-automated algorithm that was manually edited across 28 path/rows and five different years (1988, 1993, 1998, 2003, 2008). Three datasets were independently developed by three analysts and the datasets were integrated on a pixel by pixel basis in which at least one to all three analysts were required to agree a pixel was burned. We found that errors within our Landsat reference dataset could be minimized by using the rendition of the dataset in which pixels were mapped as burned if at least two of the three analysts agreed. BAECV errors of omission and commission for the detection of burned pixels averaged 42% and 33%, respectively for CONUS across all five validation years. Errors of omission and commission were lowest across the western CONUS, for example in the shrub and scrublands of the Arid West (31% and 24%, respectively), and highest in the grasslands and agricultural lands of the Great Plains in central CONUS (62% and 57%, respectively). The BAECV product detected most (> 65%) fire events > 10 ha across the western CONUS (Arid and Mountain West ecoregions). Our approach and results demonstrate that a thorough validation of Landsat science products can be completed with independent Landsat-derived reference data, but could be strengthened by the use of complementary sources of high-resolution data.

Remote Sensing of Environment↗
USGS2019

Historical background and current developments for mapping burned area from satellite Earth observation

Fire has a diverse range of impacts on Earth's physical and social systems. Accurate and up to date information on areas affected by fire is critical to better understand drivers of fire activity, as well as its relevance for biogeochemical cycles , climate, air quality, and to aid fire management. Mapping burned areas was traditionally done from field sketches. With the launch of the first Earth observation satellites, remote sensing quickly became a more practical alternative to detect burned areas, as they provide timely regional and global coverage of fire occurrence. This review paper explores the physical basis to detect burned area from satellite observations, describes the historical trends of using satellite sensors to monitor burned areas, summarizes the most recent approaches to map burned areas and evaluates the existing burned area products (both at global and regional scales). Finally, it identifies potential future opportunities to further improve burned area detection from Earth observation satellites.

Remote Sensing of Environment↗
USGS2019

Remote sensing of dryland ecosystem structure and function: Progress, challenges, and opportunities

Drylands make up roughly 40% of the Earth's land surface, and billions of people depend on services provided by these critically important ecosystems. Despite their relatively sparse vegetation, dryland ecosystems are structurally and functionally diverse, and emerging evidence suggests that these ecosystems play a dominant role in the trend and variability of the terrestrial carbon sink. More, drylands are highly sensitive to climate and are likely to have large, non-linear responses to hydroclimatic change. Monitoring the spatiotemporal dynamics of dryland ecosystem structure (e.g., leaf area index) and function (e.g., primary production and evapotranspiration) is therefore a high research priority. Yet, dryland remote sensing is defined by unique challenges not typically encountered in mesic or humid regions. Major challenges include low vegetation signal-to-noise ratios, high soil background reflectance, presence of photosynthetic soils (i.e., biological soil crusts), high spatial heterogeneity from plot to regional scales, and irregular growing seasons due to unpredictable seasonal rainfall and frequent periods of drought. Additionally, there is a relative paucity of continuous, long-term measurements in drylands, which impedes robust calibration and evaluation of remotely-sensed dryland data products. Due to these issues, remote sensing techniques developed in other ecosystems or for global application often result in inaccurate, poorly constrained estimates of dryland ecosystem structural and functional dynamics. Here, we review past achievements and current progress in remote sensing of dryland ecosystems, including a detailed discussion of the major challenges associated with remote sensing of key dryland structural and functional dynamics. We then identify strategies aimed at leveraging new and emerging opportunities in remote sensing to overcome previous challenges and more accurately contextualize drylands within the broader Earth system. Specifically, we recommend: 1) Exploring novel combinations of sensors and techniques (e.g., solar-induced fluorescence, thermal, microwave, hyperspectral, and LiDAR) across a range of spatiotemporal scales to gain new insights into dryland structural and functional dynamics; 2) utilizing near-continuous observations from new-and-improved geostationary satellites to capture the rapid responses of dryland ecosystems to diurnal variation in water stress; 3) expanding ground observational networks to better represent the heterogeneity of dryland systems and enable robust calibration and evaluation; 4) developing algorithms that are specifically tuned to dryland ecosystems by utilizing expanded ground observational network data; and 5) coupling remote sensing observations with process-based models using data assimilation to improve mechanistic understanding of dryland ecosystem dynamics and to better constrain ecological forecasts and long-term projections.

Remote Sensing of Environment↗
USGS2020

Transitioning from change detection to monitoring with remote sensing: A paradigm shift

The use of time series analysis with moderate resolution satellite imagery is increasingly common, particularly since the advent of freely available Landsat data. Dense time series analysis is providing new information on the timing of landscape changes, as well as improving the quality and accuracy of information being derived from remote sensing. Perhaps most importantly, time series analysis is expanding the kinds of land surface change that can be monitored using remote sensing. In particular, more subtle changes in ecosystem health and condition and related to land use dynamics are being monitored. The result is a paradigm shift away from change detection, typically using two points in time, to monitoring, or an attempt to track change continuously in time. This trend holds many benefits, including the promise of near real-time monitoring. Anticipated future trends include more use of multiple sensors in monitoring activities, increased focus on the temporal accuracy of results, applications over larger areas and operational usage of time series analysis.

Remote Sensing of Environment↗
USGS2020

Using NASA Earth observations and Google Earth Engine to map winter cover crop conservation performance in the Chesapeake Bay watershed

Winter cover crops such as barley, rye, and wheat help to improve soil structure by increasing porosity, aggregate stability, and organic matter, while reducing the loss of agricultural nutrients and sediments into waterways. The environmental performance of cover crops is affected by choice of species, planting date, planting method, nutrient inputs, temperature, and precipitation. The Maryland Department of Agriculture (MDA) oversees an agricultural cost-share program that provides farmers with funding to cover costs associated with planting winter cover crops, and the U.S. Geological Survey (USGS) and the U.S. Department of Agriculture-Agricultural Research Service (USDA-ARS) have partnered with the MDA to develop satellite remote sensing techniques for measuring cover crop performance. The MDA has developed the capacity to digitize field boundaries for all fields enrolled in their cover crop programs (>26,000 fields per year) to support a remote sensing performance analysis at a statewide scal,e and has requested assistance with the associated imagery processing from the National Aeronautics and Space Administration (NASA). Using the Google Earth Engine (GEE) cloud computing platform, scripts were developed to process Landsat 5/7/8 and Harmonized Sentinel-2 imagery to measure winter cover crop performance. We calibrated cover crop performance models using linear regression between satellite vegetation indices and USGS / USDA-ARS field sampling data collected on Maryland farms between 2006 and 2012 (1298 samples). Satellite-derived Normalized Difference Vegetation Index (NDVI) values showed significant correlation with the natural logarithm of cover crop biomass ( p ≤0.01, R 2 = 0.56) and with observed percent vegetative ground cover (p ≤0.01, R 2 = 0.68). The GEE scripts were used to composite seasonal maximum NDVI values for each enrolled cover crop field and calculate performance metrics for the winter and spring seasons of three enrollment years (2014–15, 2015–16, and 2017–18) for four Maryland counties. Results from winter 2017–18 demonstrate that rye and barley fields had higher biomass than wheat fields, and that early planting, along with planting methods that increase seed-soil contact, increased performance. The processing capabilities of GEE will support the MDA in scaling up remote sensing performance analysis statewide, providing information to evaluate the environmental outcomes associated with various agronomic management strategies. The tool can be modified for different seasonal cutoffs, utilize new sensors to capture phenology in winter and spring, and scale to larger regions for use in adaptive management of winter cover crops planted for environmental benefit.

Maryland↗
USGS2020

Landsat 9: Empowering open science and applications through continuity

The history of Earth observation from space is well reflected through the Landsat program. With data collection beginning with Landsat-1 in 1972, the program has evolved technical capabilities while maintaining continuity of land observations. In so doing, Landsat has provided a critical reference for assessing long-term changes to Earth's land environment due to both natural and human forcing. Poised for launch in mid-2021, the joint NASA-USGS Landsat 9 mission will continue this important data record. In many respects Landsat 9 is a clone of Landsat-8. The Operational Land Imager-2 (OLI-2) is largely identical to Landsat 8 OLI, providing calibrated imagery covering the solar reflected wavelengths. The Thermal Infrared Sensor-2 (TIRS-2) improves upon Landsat 8 TIRS, addressing known issues including stray light incursion and a malfunction of the instrument scene select mirror. In addition, Landsat 9 adds redundancy to TIRS-2, thus upgrading the instrument to a 5-year design life commensurate with other elements of the mission. Initial performance testing of OLI-2 and TIRS-2 indicate that the instruments are of excellent quality and expected to match or improve on Landsat 8 data quality. Landsat-9 will maintain the current data acquisition rate of up to 740 scenes per day, with these scenes available from the Landsat archive at no cost to users. In this communication, we provide background and rationale for the Landsat 9 mission, describe the instrument payloads and ground system, and discuss data products available from the Landsat 9 mission through USGS.

Remote Sensing of Environment↗
USGS2020

Estimating wildfire fuel consumption with multitemporal airborne laser scanning data and demonstrating linkage with MODIS-derived fire radiative energy

Characterizing pre- and post-fire fuels remains a key challenge for estimating biomass consumption and carbon emissions from wildfires. Airborne laser scanning (ALS) data have demonstrated effectiveness for estimating canopy, and to a lesser degree, surface fuel components at fine-scale (i.e., 30 m) across landscapes. Using pre- and post-fire ALS data and corresponding field data, this study estimated consumption of canopy fuel (ΔCF), understory fuel (ΔUF), total fuel (ΔTF), and canopy bulk density (ΔCBD) for the 2012 Pole Creek fire in Oregon, USA (10,760 ha), and portions of the 2011 Las Conchas fire in New Mexico, USA (4,934 ha). Additionally, the feasibility of predicting fuel consumption was tested using separate pre- and post-fire models (PrePost), models combining all pre- and post-fire data (Pooled), and models using all data from both fires (Global). Estimates of ΔTF were then compared to fire radiative energy (FRE, units: MJ) derived from Fire Radiative Power (FRP, units: MW) observations from the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor onboard NASA Terra and Aqua satellites to mechanistically derive a biomass combustion coefficient (BCC, units: kg MJ −1 ). The PrePost and Pooled approaches yielded similar results at Las Conchas, but at Pole Creek insufficient pre-fire field data resulted in erroneous fuel consumption estimates outside the fire perimeter using the PrePost models. These results demonstrated that pre-fire field data were less important for these models than having field data which represent the full range of fuel conditions likely to exist across the landscape. Estimated total biomass consumed for the PrePost, Pooled, and Global models were 226 Gg, 224 Gg, and 224 Gg at Las Conchas, and 581 Gg, 713 Gg, and 552 Gg at Pole Creek. Comparisons between estimated ΔTF and FRE yielded an average BCC for both fires of 0.367 (s.d. ± 0.049) kg MJ −1 based on pixels with at least five MODIS observations. Both higher MODIS observations per pixel and accounting for canopy occlusion of FRE improved the relationship between ΔTF and MODIS-FRE. This study suggested a practical modelling approach for future efforts using only post-fire field observations and quantified a landscape-scale relationship between MODIS-derived FRE and fine-scale fuel consumption consistent with prior experiments.

New Mexico, Oregon↗