USGS Science⌕ Search

SEARCH · USGS Science

Results for “Offshore”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources
USGS2010

Seismotectonics and fault structure of the California Central Coast

I present and interpret new earthquake relocations and focal mechanisms for the California Central Coast. The relocations improve upon catalog locations by using 3D seismic velocity models to account for lateral variations in structure and by using relative arrival times from waveform cross-correlation and double-difference methods to image seismicity features more sharply. Focal mechanisms are computed using ray tracing in the 3D velocity models. Seismicity alignments on the Hosgri fault confirm that it is vertical down to at least 12 km depth, and the focal mechanisms are consistent with right-lateral strike-slip motion on a vertical fault. A prominent, newly observed feature is an ~25 km long linear trend of seismicity running just offshore and parallel to the coastline in the region of Point Buchon, informally named the Shoreline fault. This seismicity trend is accompanied by a linear magnetic anomaly, and both the seismicity and the magnetic anomaly end where they obliquely meet the Hosgri fault. Focal mechanisms indicate that the Shoreline fault is a vertical strike-slip fault. Several seismicity lineations with vertical strike-slip mechanisms are observed in Estero Bay. Events greater than about 10 km depth in Estero Bay, however, exhibit reverse-faulting mechanisms, perhaps reflecting slip at the top of the remnant subducted slab. Strike-slip mechanisms are observed offshore along the Hosgri–San Simeon fault system and onshore along the West Huasna and Rinconada faults, while reverse mechanisms are generally confined to the region between these two systems. This suggests a model in which the reverse faulting is primarily due to restraining left-transfer of right-lateral slip.

California↗
USGS2015

Basement and regional structure along strike of the Queen Charlotte Fault in the context of modern and historical earthquake ruptures

The Queen Charlotte fault (QCF) is a dextral transform system located offshore of southeastern Alaska and western Canada, accommodating ∼4.4  cm/yr of relative motion between the Pacific and North American plates. Oblique convergence along the fault increases southward, and how this convergence is accommodated is still debated. Using seismic reflection data, we interpret offshore basement structure, faulting, and stratigraphy to provide a geological context for two recent earthquakes, an M w 7.5 strike‐slip event near Craig, Alaska, and an M w 7.8 thrust event near Haida Gwaii, Canada. We map downwarped Pacific oceanic crust near 54° N, between the two rupture zones. Observed downwarping decreases north and south of 54° N, parallel to the strike of the QCF. Bending of the Pacific plate here may have initiated with increased convergence rates due to a plate motion change at ∼6  Ma. Tectonic reconstruction implies convergence‐driven Pacific plate flexure, beginning at 6 Ma south of a 10° bend the QCF (which is currently at 53.2° N) and lasting until the plate translated past the bend by ∼2  Ma. Normal‐faulted approximately late Miocene sediment above the deep flexural depression at 54° N, topped by relatively undeformed Pleistocene and younger sediment, supports this model. Aftershocks of the Haida Gwaii event indicate a normal‐faulting stress regime, suggesting present‐day plate flexure and underthrusting, which is also consistent with reconstruction of past conditions. We thus favor a Pacific plate underthrusting model to initiate flexure and accommodation space for sediment loading. In addition, mapped structures indicate two possible fault segment boundaries along the QCF at 53.2° N and at 56° N.

Alaska↗
USGS2022

The potential of using fiber optic distributed acoustic sensing (DAS) in earthquake early warning applications

As the seismological community embraces fiber optic distributed acoustic sensing (DAS), DAS arrays are becoming a logical, scalable option to obtain strain and ground‐motion data for which the installation of seismometers is not easy or cheap, such as in dense offshore arrays. The potential of strain data in earthquake early warning (EEW) applications has been recently demonstrated using records from borehole strainmeters (BSMs). However, current BSM networks are sparse, installing more BSMs is expensive and often impractical, and BSMs have the same limitations in offshore environments as other traditional seismic instruments. Here, we aim to provide a road map about how DAS data could be used in existing EEW applications, using the ShakeAlert EEW System for the West Coast of the United States as an example. We review the data requirements for EEW systems, examine ways in which strain‐derived ground‐motion data can be incorporated into such systems without significant modifications, and determine what is still needed for full utilization of DAS data in these applications. Importantly, EEW algorithms require ground‐motion amplitude information for rapid earthquake source characterization; thus, accurate strain amplitude observations, not only phase information, are necessary for deriving these ground‐motion metrics from DAS data. To obtain high‐quality ground‐motion observations, EEW‐compatible DAS arrays need to be multicomponent, well coupled, and low noise. We suggest ways to achieve such data requirements using existing DAS technology and discuss areas in which further research is needed to optimize DAS array performance for EEW.

Bulletin of the Seismological Society of America↗
USGS2023

A population-based performance evaluation of the ShakeAlert earthquake early warning system for M 9 megathrust earthquakes in the Pacific Northwest, U.S.A.

We evaluate the potential performance of the ShakeAlert earthquake early warning system for M 9 megathrust earthquakes in the Pacific Northwest (PNW) using synthetic seismograms from 30 simulated M 9 earthquake scenarios on the Cascadia subduction zone. The timeliness and accuracy of source estimates and effectiveness of ShakeAlert alert contours are evaluated with a station‐based alert classification scheme using an alert threshold equal to the target threshold. We develop a population‐based alert classification method by aligning a population grid with Voronoi diagrams computed from the station locations for each scenario. Using raster statistics, we estimate the PNW population that would receive timely accurate alerts during an offshore M 9 earthquake. We also examine the range of expected warning times with respect to the spatial distribution of the population. Results show that most of the population in our evaluation region could receive alerts with positive warning times for an alert threshold of modified Mercalli intensity (MMI) III, but that late and missed alerts increase because the alert threshold is increased. An average of just under 60% of the population would be alerted for MMI V prior to the arrival of threshold level shaking. Large regions of late and missed alerts for thresholds MMI IV and V are caused by delays in alert updates, inaccurate FinDer source estimates, and undersized alert contours due to magnitude underestimation. We also investigate an alerting strategy where ShakeAlert sends out an alert to the entire evaluation region when the system detects at least an M 8 earthquake along the coast. Because large magnitude offshore earthquakes are rare in Cascadia, overalerting is most likely to occur from an overestimated M 7+ on the Gorda plate. With appropriate criteria to minimize overalerting, this strategy may eliminate all missed and late alerts except at sites close to the epicenter.

California, Oregon, Washington↗
USGS2016

Observations of seismicity and ground motion in the northeast U.S. Atlantic margin from ocean bottom seismometer data

Earthquake data from two short-period ocean-bottom seismometer (OBS) networks deployed for over a year on the continental slope off New York and southern New England were used to evaluate seismicity and ground motions along the continental margin. Our OBS networks located only one earthquake of M c ∼1.5 near the shelf edge during six months of recording, suggesting that seismic activity (M Lg >3.0) of the margin as far as 150–200 km offshore is probably successfully monitored by land stations without the need for OBS deployments. The spectral acceleration from two local earthquakes recorded by the OBS was found to be generally similar to the acceleration from these earthquakes recorded at several seismic stations on land and to hybrid empirical acceleration relationships for eastern North America. Therefore, the seismic attenuation used for eastern North America can be extended in this region at least to the continental slope. However, additional offshore studies are needed to verify these preliminary conclusions.

Seismological Research Letters↗
USGS2021

Seismotectonic analysis of the 2019–2020 Puerto Rico sequence: The value of absolute earthquake relocations in improved interpretations of active tectonics

We present a new catalog of calibrated earthquake relocations from the 2019–2020 Puerto Rico earthquake sequence related to the 7 January 2020 M w 6.4 earthquake that occurred offshore of southwest Puerto Rico at a depth of 15.9 km. Utilizing these relocated earthquakes and associated moment tensor solutions, we can delineate several distinct fault systems that were activated during the sequence and show that the M w 6.4 mainshock may have resulted from positive changes in Coulomb stress from earlier events. Seismicity and mechanisms define (1) a west–southwest (∼260°) zone of seismicity comprised of largely sinistral strike‐slip and oblique‐slip earthquakes that mostly occurs later in the sequence and to the west of the mainshock, (2) an area of extensional faulting that includes the mainshock and occurs largely within the mainshock’s rupture area, and (3) an north–northeast (∼30°)‐striking zone of seismicity, consisting primarily of dextral strike‐slip events that occurs before and following the mainshock and generally above (shallower than) the normal‐faulting events. These linear features intersect within the M w 6.4 mainshock’s fault plane in southwest Puerto Rico. In addition, we show that earthquake relocations for M 4+ normal‐faulting events, when traced along their fault planes, daylight along east–west‐trending bathymetric features offshore of southwest Puerto Rico. Correlation of these normal‐faulting events with bathymetric features suggests an active fault system that may be a contributor to previously uncharacterized seismic hazards in southwest Puerto Rico.

Puerto Rico↗
USGS2022

Testing the ShakeAlert earthquake early warning system using synthesized earthquake sequences

We test the behavior of the United States (US) West Coast ShakeAlert earthquake early warning (EEW) system during temporally close earthquake pairs to understand current performance and limitations. We consider performance metrics based on source parameter and ground‐motion forecast accuracy, as well as on alerting timeliness. We generate ground‐motion times series for synthesized earthquake sequences from real data by combining the signals from pairs of well‐recorded earthquakes (⁠4.4≤M≤7.1⁠) using time shifts ranging from −60 to +180 s. We examine fore‐ and aftershock sequences, near‐simultaneous events in different source regions, and simulated out‐of‐network and offshore earthquakes. We find that the operational ShakeAlert algorithms Earthquake Point‐source Integrated Code (EPIC) and Finite‐Fault Rupture Detector (FinDer) and the Propagation of Local Undamped Motion (PLUM) method perform largely as expected: EPIC provides the best source location estimates and is often fastest but can underestimate magnitudes or, in extreme cases, miss large earthquakes; FinDer provides real‐time line‐source models and unsaturated magnitude estimates for large earthquakes but currently cannot process concurrent events and may mislocate offshore earthquakes; PLUM identifies pockets of strong ground motion, but can overestimate alert areas. Implications for system performance are: (1) spatially and temporally close events are difficult to identify separately; (2) challenging scenarios with foreshocks that are close in space and time can lead to missed alerts for large earthquakes; and (3) in these situations the algorithms can often estimate ground motion better than source parameters. To improve EEW, our work suggests revisiting the current algorithm weighting in ShakeAlert, to continue developments that focus on using ground‐motion data to aggregate alerts from multiple algorithms, and to investigate methods to optimally leverage algorithm ground‐motion estimates. For testing and certification of EEW performance in ShakeAlert and other EEW systems where applicable, we also suggest that 25 of our 73 scenarios become part of the baseline data set.

California↗
USGS2026

Cascadia Subduction Zone science: Call for the next generation community seismic velocity model

The Cascadia subduction zone (CSZ) hosts major seismic and tsunami hazards, yet key questions persist about the relationship between margin structure, fluid distribution, episodic tremor and slip, shallow megathrust behavior, shaking and tsunamigenesis, and the resulting hazard estimates. Addressing these problems requires an empirically grounded, three‐dimensional seismic velocity model to illuminate subsurface structure and properties and to provide a basis for geophysical studies such as earthquake simulations and ground‐motion estimation. In May 2024, the National Science Foundation‐funded Cascadia Region Earthquake Science Center (CRESCENT) community velocity model (CVM) working group, with U.S. Geological Survey and regional partners, convened a workshop to identify priorities for such a model. Participants emphasized the features necessary for addressing key science questions, including implementing findability, accessibility, interoperability, and reusability (FAIR) access, capturing along‐strike and along‐dip structural heterogeneity, resolving shallow offshore–onshore structure, constraining elastic properties and quantifying their uncertainties for numerical wave propagation simulations, their validation benchmarks, and supporting associated accurate earthquake ground‐motion simulations and hazard assessments. This article describes the priorities defined in the workshop, and a description of how, guided by these needs, CRESCENT plans to develop multiple generations of a CVM to advance CSZ science and improve seismic and tsunami hazard modeling across the Pacific Northwest. The CVM will span the CSZ from the surface to ∼100 km depth, offshore and east of the Cascades into Idaho (∼132°–110° W) and the southern and northern tectonic regime transitions (∼36°–52° N) to capture the entire tectonic system as well as its surroundings.

Cascadia Subduction Zone↗
USGS1990

Introduction to stratigraphy and hydrocarbon occurrence in Oligocene and Miocene rocks of the Santa Barbara-Ventura and Santa Maria Basins of California

The Santa Barbara-Ventura and Santa Maria basins of southern California have been of great interest to the oil industry because oil or gas has been produced from nearly all the sedimentary units ranging in age from the Cretaceous to the Pleistocene. In particular, the Neogene section of these basins is oil-rich, containing eight giant oil fields (greater than 100 million barrels) in the onshore and at least five in the offshore. In the Santa Barbara-Ventura basin the sedimentary sequence includes marine beds ranging in age from Cretaceous to Pleistocene and two nonmarine sequences of Eocene-Oligocene and Pleistocene ages. The main reservoir for hydrocarbons in this basin is the thick deep-sea sand sequence of the Pliocene and Pleistocene Pico Formation. The other important production in this basin is from reservoirs in the Miocene and, to a lesser extent, the Oligocene sequences. These reservoirs, including the nonmarine Sespe Formation and the marine Alegria, Vaqueros, Monterey, and Sisquoc Formations, are the emphasis of this core workshop. In the Santa Maria basins to the north and northwest of the Santa Barbara-Ventura basin, the Paleogene sequence is absent for the most part, and the upper Neogene sequence does not include the thick Pliocene and Pleistocene Pico Formation. In both the onshore and offshore Santa Maria basins the fractured rocks of the deep-marine Miocene Monterey Formation are the main reservoir for hydrocarbons. Another important reservoir is the upper Miocene and Pliocene marine Sisquoc Formation; both Monterey and Sisquoc cores from the Santa Maria basin are shown in this workshop. As in the Santa Barbara-Ventura basin, the pre-Monterey sedimentary sequence of the Santa Maria basins also contains minor petroleum accumulations.

California↗
USGS2008

Evidence of Late Pliocene-Early Pleistocene marine environments in the deep subsurface of the Lihue Basin, Kauai, Hawaii

Cuttings recovered from two deep exploratory wells in the Lihue Basin, Kauai, Hawaii, include fossiliferous marine deposits that offer an uncommon opportunity to study paleoenvironments from the deep subsurface in Hawaii and interpret the paleogeography and geologic history of Kauai. These deposits indicate that two marine incursions gave rise to protected shallow-water, low-energy embayments in the southern part of the Lihue Basin in the late Pliocene-early Pleistocene. During the first marine incursion, the embayment was initially zoned, with a variable-salinity environment nearshore and a normal-marine reef environment offshore. The offshore reef environment eventually evolved to a nearshore, variable-salinity environment as the outer part of the embayment shallowed. During the second marine incursion, the embayment had normal-marine to hypersaline conditions, which constitute a significant departure from the variable-salinity environment present during the first marine incursion. Large streams draining the southern Lihue Basin are a likely source of the freshwater that caused the salinity fluctuations evident in the fossils from the first marine incursion. Subsequent volcanic eruptions produced lava flows that buried the embayment and probably diverted much of the stream flow in the southern Lihue Basin northward, to its present point of discharge north of Kalepa Ridge. As a result, the embayment that formed during the second marine incursion received less freshwater, and a normal-marine to hypersaline environment developed. The shallow-water marine deposits, currently buried between 86 m and 185 m below present sea level, have implications for regional tectonics and global eustasy. Copyright ?? 2008, SEPM (Society for Sedimentary Geology).

Palaios↗
USGS1991

Tectonic evolution of submarine canyons along the California continental margin

The development of submarine canyons along active-plate margins commonly is influenced by tectonic processes. Recent studies of submarine canyons along the transform margin of western North America show that the origin and subsequent evolution of many canyons are correlatable with plate motion and plate-margin deformation. Elements of canyon morphology such as bends and meanders commonly are controlled by faults and folds that are relatable to the structural fabric of the continental shelf and slope. Some canyon heads that appear to be displaced from their lower reaches are explainable as the result of movement along strike-slip faults associated with the plate margin. Many submarine canyons along the California margin are not associated with large rivers and thus may owe their origins either to pre-Holocene fluvial or structural processes. Some modern canyons appear to be associated with pre-Pleistocene ancestral canyons. Because of both vertical and horizontal tectonic movements during the past 20 Ma, some California submarine canyons have been repeatedly filled and exhumed; the most recent exhumation began during the latest lowstand of sea level and continues today. Canyons that today have their upper reaches on the continental slope or outermost shelf, distant from large rivers or other sources of sediment supply, commonly appear to have been laterally displaced along offshore faults. Palinspastic reconstructions along these faults commonly reveal a genetic relation between such canyons and canyons heading nearshore, from which they were offset. For example, detailed studies of the Ascension-Monterey Submarine Canyon system in Monterey Bay suggest that several smaller canyons on the outer shelf and upper slope have been displaced northwestward from the headward part of Monterey Canyon by right slip along offshore faults of the Palo Colorado-San Gregorio, Ascension, and Monterey Bay fault zones. Many other canyons on the California margin have developed along, or had their courses abruptly altered by, structural zones, owing either to canyon cutting along a zone of weakness or to fault displacement. Mass wasting associated with zones of faulting and slumping, which may have been seismically induced, also may affect canyon form. Clearly, submarine canyons along the California margin commonly owe their origin and morphologic development to influences other than fluvial erosion during sea-level lowstands. A chief influence has been the San Andreas fault system.

California↗
USGS2004

Ship Shoal as a prospective borrow site for barrier island restoration, coastal south-central Louisiana, Usa: Numerical wave modeling and field measurements of hydrodynamics and sediment transport

Ship Shoal, a transgressive sand body located at the 10 m isobath off south-central Louisiana, is deemed a potential sand source for restoration along the rapidly eroding Isles Dernieres barrier chain and possibly other sites in Louisiana. Through numerical wave modeling we evaluate the potential response of mining Ship Shoal on the wave field. During severe and strong storms, waves break seaward of the western flank of Ship Shoal. Therefore, removal of Ship Shoal (approximately 1.1 billion m 3 ) causes a maximum increase of the significant wave height by 90%–100% and 40%–50% over the shoal and directly adjacent to the lee of the complex for two strong storm scenarios. During weak storms and fair weather conditions, waves do not break over Ship Shoal. The degree of increase in significant wave height due to shoal removal is considerably smaller, only 10%–20% on the west part of the shoal. Within the context of increasing nearshore wave energy levels, removal of the shoal is not significant enough to cause increased erosion along the Isles Dernieres. Wave approach direction exerts significant control on the wave climate leeward of Ship Shoal for stronger storms, but not weak storms or fairweather. Instrumentation deployed at the shoal allowed comparison of measured wave heights with numerically derived wave heights using STWAVE. Correlation coefficients are high in virtually all comparisons indicating the capability of the model to simulate wave behavior satisfactorily at the shoal. Directional waves, currents and sediment transport were measured during winter storms associated with frontal passages using three bottom-mounted arrays deployed on the seaward and landward sides of Ship Shoal (November, 1998–January, 1999). Episodic increases in wave height, mean and oscillatory current speed, shear velocity, and sediment transport rates, associated with recurrent cold front passages, were measured. Dissipation mechanisms included both breaking and bottom friction due to variable depths across the shoal crest and variable wave amplitudes during storms and fair-weather. Arctic surge fronts were associated with southerly storm waves, and southwesterly to westerly currents and sediment transport. Migrating cyclonic fronts generated northerly swell that transformed into southerly sea, and currents and sediment transport that were southeasterly overall. Waves were 36% higher and 9% longer on the seaward side of the shoal, whereas mean currents were 10% stronger landward, where they were directed onshore, in contrast to the offshore site, where seaward currents predominated. Sediment transport initiated by cold fronts was generally directed southeasterly to south-westerly at the offshore site, and southerly to westerly at the nearshore site. The data suggest that both cold fronts and the shoal, exert significant influences on regional hydrodynamics and sediment transport.

Journal of Coastal Research↗
USGS2019

A ship's ballasting history as an indicator of foraminiferal invasion potential--An example from Prince William Sound, Alaska, USA

We investigated the potential role of ballast sediment from coastal and transoceanic oil tankers arriving and de-ballasting in Port Valdez as a vector for the introduction of invasive benthic foraminifera in Prince William Sound, Alaska. Forty-one ballast sediment samples were obtained in 1998-1999 from 11 oil tankers that routinely discharged their ballast in Prince William Sound after sailing from other West Coast (Los Angeles/Long Beach Harbor, San Francisco Bay, and Puget Sound) or foreign ports (Japan, Korea, and China) where they originally ballasted. Forty of these samples contained benthic foraminifera, including 27 (66%) with the introduced species Trochammina hadai Uchio from nine (81%) of the ships. In all, 59 species were recovered and foraminiferal abundance peaked at 27,000 specimens per gram dry sediment. Of the 41 samples, three were stained and living benthic foraminifera were recovered in all three of them. The entrained foraminifera reflected the number of times ballasting occurred (single or multiple sources), the location of ballasting (estuarine or offshore), and post-acquisition alteration of the sediment (i.e., growth of gypsum crystals at the possible expense of calcareous tests). In temperate regions, sediment samples resulting from single-source ballasting in estuaries (SSBE), multiple-source ballasting in estuaries (MSBE), single-source ballasting offshore (SSBO), and a combination of SSBO and SSBE or MSBE, typically contained increasingly higher species richness, respectively. The potential for an invasion is dependent on the presence of viable candidates and their survivability, their abundance in the ballasting location, and the number of times ballasting occurs, most of which are evident from the ship’s ballasting history. Trochammina hadai is a good example of a successful invasive in Prince William Sound for the following reasons: 1) the species is abundant enough in West Coast and foreign ports where ballasting occurs that sufficient individuals needed for reproduction may be transported to the receiving waters; 2) Port Valdez, in particular, receives repeated and frequent inoculations from the same source ports where T. hadai is present; 3) large quantities of sediment are taken up by commercial vessels during ballasting and benthic foraminifera occur in abundance in ballast sediment; 4) ballast sediment provides a suitable environment in which benthic foraminifera can survive for extended periods of time during transport; 5) T. hadai flourishes in a wide range of temperatures and environmental conditions that characterize both the ports where ballasting takes place as well as in Port Valdez where de-ballasting occurs; and 6) the species is capable of asexual reproduction and possibly the ability to form a dormant resting stage, both of which have the potential to lower the threshold for colonization. Clearly, ballast sediment is a viable vector for the introduction of T. hadai and other invasives into Alaskan ports and elsewhere worldwide.

Alaska↗
USGS1993

Trace metals (Cd, Cu, Ni, and Zn) and nutrients in coastal waters adjacent to San Francisco Bay, California

Samples collected in December 1990 and July 1991 show that dissolved Cd, Cu, Ni, and Zn distributions in the Gulf of the Farallones are dominated by mixing of two end-members: (1) metal-enriched San Francisco Bay water and (2) offshore California Current water. The range of dissolved metal concentrations observed is 0.2–0.9 nmol kg −1 for Cd, 1–20 nmol kg −1 for Cu, 4–16 nmol kg −1 for Ni, and 0.2–20 nmol kg −1 for Zn. Effective concentrations in fresh water discharged into San Francisco Bay during 1990–1991 (estimated by extrapolation to zero salinity) are 740–860 μmol kg −1 for silicate, 21–44 μmol kg −1 for phosphate, 10–15 nmol kg −1 for Cd, 210–450 nmol kg −1 for Cu, 210–270 nmol kg −1 for Ni, and 190–390 nmol kg −1 for Zn. Comparison with effective trace metal and nutrient concentrations for freshwater discharge reported by Flegal et al. (1991) shows that input of these constituents to the northern reaches of San Francisco Bay accounts for only a fraction of the input to Gulf of the Farallones from the estuary system as a whole. The nutrient and trace metal composition of shelf water outside a 30-km radius from the mouth of the estuary closely resembles that of California Current water further offshore. In contrast to coastal waters elsewhere, there is little evidence of Cd, Cu, Ni, and Zn input by sediment diagenesis in continental shelf waters of California.

Estuaries↗
USGS1991

Mortality of seabirds in the Japanese land-based gillnet fishery for salmon

Mortality rates of seabirds in the Japanese land-based drift gillnet fishery for salmon were assessed from 413 gillnet sets made by Japanese research vessels in offshore areas used by the commercial fleet. Sixteen species of seabirds were recorded in nets. Shearwaters, primarily Short-tailed Shearwaters ( Puffinus tenuirostris ), and to a lesser extent Sooty Shearwaters ( P. griseus ), predominated in the catches, followed by lesser numbers of Tufted Puffins ( Fratercula cirrhata ) and Thick-billed Murres ( Uria lomvia ). Catch-rates of seabirds varied by oceanographic zone, with most being caught in oceanic waters north of the Subarctic Front. Approximately 151,000 seabirds were killed in the offshore component of the land-based fishery in 1977. Mortality was reduced to about 57,000 seabirds in 1987 because of a reduction in fishing effort. No estimates are available of seabird mortality in the nearshore component of the fishery. Mortality of seabirds in the land-based fishery is discussed with respect to other major drift gillnet fisheries in the North Pacific.

The Condor↗
USGS1993

Distribution and abundance of Marbled Murrelets in Alaska

Most seabirds breed in colonies on offshore islands, but throughout most of their range from California to Alaska Marbled Murrelets ( Brachyramphus marmoratus ) fly inland to nest on trees in old-growth coniferous forests. Some fraction of the murrelet population nests on the ground in Alaska. The relative distribution and abundance of murrelets in forested and treeless areas of Alaska is poorly known. We analyzed data on seabird abundance at sea and on colonies in Alaska that were obtained under the Outer Continental Shelf Environmental Assessment Program during the 1970s and 1980s. Whereas most seabirds may be censused at breeding colonies, murrelet populations must be estimated from surveys at sea. We compared colony and pelagic population estimates for 13 colonial seabird species in Alaska and found that they were strongly correlated (r 2 = 0.94). We therefore used at-sea censuses to estimate that at least 160,000 murrelets reside in Alaska. Most (97%) Marbled Murrelets are concentrated offshore of large tracts of coastal coniferous forests in southeast Alaska (Alexander Archipelago), Prince William Sound, and the Kodiak Archipelago.

Alaska↗
USGS1993

Sediment export by ice rafting from a coastal Polynya, Arctic Alaska, U.S.A.

Strong offshore winds in early 1989 produced a shore polynya that reached along the entire north coast of Alaska and eastward beyond the mouth of the Mackenzie River in Canada. From January through April, this open water periodically exposed the shelf to sediment entrainment by suspension freezing. This process requires turbulence and supercooled water, which results in the formation of frazil and anchor ice. The resulting granular, sediment-laden ice was observed to extend over 100 km seaward of the outer continental shelf after having been advected offshore. It was sampled to determine sediment type and to quantify the particle load. The particle size was mainly silt and clay, with local admixtures of as much as 27% sand and coarser clasts. Melted ice samples contained from 31 to nearly 600 mg L -1 of sediment. Combining these data with over 400 km of shipboard and aerial observations, photographs, and computer analysis of a summer Landsat image, we estimated the sediment load per unit area of sea ice. Seaward of the shelf, in regions of dense pack ice, a conservatively estimated sediment load was over 289 t km -2 . Using a westward summer drift rate of 3 cm s -1 , the sediment transport through a 1-km-long north-south segment is 67,418 t during 3 mo. In terms of regional sediment dynamics (littoral transport estimated at 10,000 t during the same period) and sediment budget (continental denudation estimated at 10 t km -2 during the same period), this number is very significant. Benthic microfossils indicate that bottom sediment incorporated in the ice came from water depths ranging from the inner neritic seaward to 50 m. The large load of shelf-derived sediment observed seaward of the continental shelf indicates that ice entrainment and transport cause shelf erosion. Nothing is known about sediment release over the Arctic Ocean Basin from these pulses of dirty ice that are periodically introduced into the Transpolar Drift.

Alaska↗
USGS2016

Erosional and depositional history of the Atlantic passive margin as recorded in detrital zircon fission-track ages and lithic detritus in Atlantic Coastal plain sediments

Comparison of fission-track (FT) ages of detrital zircons recovered from Atlantic Coastal Plain sediments to FT ages of zircons from bedrock in source terranes in the Appalachians provides a key to understanding the provenance of the sediments and, in turn, the erosional and depositional history of the Atlantic passive margin. In Appalachian source terranes, the oldest zircon fission-track (ZFT) ages from bedrock in the western Appalachians (defined for this paper as the Appalachian Plateau, Valley and Ridge, and far western Blue Ridge) are notably older than the oldest ages from bedrock in the eastern Appalachians (Piedmont and main part of the Blue Ridge). The age difference is seen both in ZFT sample ages and in individual zircon grain ages and reflects differences in the thermotectonic history of the rocks. In the east, ZFT data indicate that the rocks cooled from temperatures high enough to partially or totally reset ZFT ages during the Paleozoic and (or) Mesozoic. The majority of the rocks are interpreted to have cooled through the ZFT closure temperature (∼235 °C) at various times during the late Paleozoic Alleghanian orogeny. In contrast, most of the rocks sampled in the western Appalachians have never been heated to temperatures high enough to totally reset their ZFT ages. Reflecting their contrasting thermotectonic histories, nearly 80 percent of the sampled western rocks yield one or more zircon grains with very old FT ages, in excess of 800 Ma; zircon grains yielding FT ages this old have not been found in rocks in the Piedmont and main part of the Blue Ridge. The ZFT data suggest that the asymmetry of zircon ages of exposed bedrock in the eastern and western Appalachians was in evidence by no later than the Early Cretaceous and probably by the Late Triassic. Detrital zircon suites from sands collected in the Atlantic Coastal Plain provide a record of detritus eroded from source terranes in the Appalachians during the Mesozoic and Cenozoic. In Virginia and Maryland, sands of Early Cretaceous through late early Oligocene age do not yield any old zircons comparable in age to the old zircons found in bedrock in the western Appalachians. Very old zircons yielding FT ages >800 Ma are only encountered in Coastal Plain sands of middle early Miocene and younger age. Miocene and younger fluvial-deltaic deposits associated with the major mid-Atlantic Coastal Plain rivers that now head in the western Appalachians (the Hudson, Delaware, Susquehanna, Potomac, James, and Roanoke) contain abundant clasts of fossiliferous chert and quartzite and other distinctive rock types derived from Paleozoic rocks of the western Appalachians. These distinctive clasts have not been reported in older Coastal Plain sediments. The ZFT and lithic detritus data indicate that the drainage divide for one or more east-flowing mid-Atlantic rivers migrated west into the western Appalachians, and the river(s) began transporting western Appalachian detritus to the Atlantic Coastal Plain, sometime between the late early Oligocene and middle early Miocene. By no later than late middle Miocene most if not all of the major rivers that now head west of the Blue Ridge were transporting western Appalachian detritus to the Coastal Plain. Prior to the drainage divide migrating into the western Appalachians, the ZFT data are consistent with the dominant source of Atlantic Coastal Plain sediments being detritus from the Piedmont and main part of the Blue Ridge, with possible input from distant volcanic sources. The ZFT data suggest that the rapid increase in the rate of siliciclastic sediment accumulation in middle Atlantic margin offshore basins that peaked in the middle Miocene and produced almost 30 percent of the total volume of post-rift siliciclastic sediments in the offshore basins began in the early Miocene when Atlantic river(s) gained access to the relatively easily eroded Paleozoic sedimentary rocks of the western Appalachians.

American Journal of Science↗