USGS Science⌕ Search

SEARCH · USGS Science

Results for “Mining Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources
USGS1990

Geology and mineralization at the Ishmas Kabir gold prospect, Ishmas gold district, Kingdom of Saudi Arabia

Ishmas Kabir ancient gold mine is located approximately 60 km southeast of the city of Ranyah and 9 km northwest of Jabal Ishmas in the southwestern part of the Ishmas gold district. The mine workings are located near the eastern edge of a flat plain covered by eolian sand and drained by Wadi Bishah. Two elongate dumps, 75 m wide and 530 m long (combined length), comprise the workings. Rising 4 m above the plain, they are prominent features in this area of low relief. Core drilling (1,023 m total depth drilled) was conducted to define the extent of potential gold occurrences at the prospect. The two northeasternmost of the four holes drilled unequivocally intersected the gold-bearing main vein zone. Drill hole 1, the northeasternmost hole drilled, passed through significant lengths of altered wall rocks + quartz veins containing > 100 ppb Au (threshold value). The average gold concentration of all intercepts in drill holes 1 through 4 is 278 ppb; the total length of drill core that assayed above the gold threshold value is 13.46 m. The highest gold concentration (1,620 ppb) reported in geochemical assay results was obtained from a 0.33 m length of core in drill hole 1. Gold-intercept occurrences are not economic in the rocks drilled; no further deep drilling is recommended at this time. Gold concentrations in samples obtained from mine dumps are much higher than in drill-core samples. Samples collected by earlier workers assayed 3-7 g/t, and tonnage estimates of mine spoil have been estimated to be as high as 120,000 tons. A possible sampling bias in earlier studies may favor larger gold-enriched, samples relative to samples from quartz tailings. Further work at Ishmas Kabir should be limited to defining gold resource potential in the dumps and in the oxidized, near-surface quartz-vein system. Primary gold at the Ishmas Kabir gold prospect occurs with quartz veins and associated sericite + pyrite alteration hosted by quartz diorite and mafic dikes. The highest gold concentrations both in dumps (earlier studies) and drill core (this investigation) are found with limonite + hematite in breccia zones, in stringer veins, and in sericitic alteration envelopes surrounding quartz veins. Secondary gold is significant in this system and attests to the importance of oxidizing, acidic solutions. Quartz veins intersected by drill holes are surrounded by mylonite schist. Quartz and carbonate veins less than 5 mm thick are boudined, whereas thick quartz veins (£ 1.2 m) have disrupted and brecciated margins; mylonitized country rock envelops quartz-vein fragments. Sulfide mineralization associated with vein formation predates this rock-deformation event. Contemporaneous brittle and ductile deformation of quartz veins and country rocks occurred during the Nabitah orogeny. Supergene gold enrichment took place much later.

Open-File Report↗
USGS2007

Surface-Water Hydrology and Quality at the Pike Hill Superfund Site, Corinth, Vermont, October 2004 to December 2005

The hydrology and quality of surface water in and around the Pike Hill Brook watershed, in Corinth, Vermont, was studied from October 2004 to December 2005 by the U.S. Geological Survey in cooperation with the U.S. Environmental Protection Agency (USEPA). Pike Hill was mined intermittently for copper from 1847 to 1919 and the site is known to be contributing trace elements and acidity to Pike Hill Brook and an unnamed tributary to Cookville Brook. The site has been listed as a Superfund site since 2004. Streamflow, specific conductance, pH, and water temperature were measured continuously and monthly at three sites on Pike Hill Brook to determine the variation in these parameters over an annual cycle. Synoptic water-quality sampling was done at 10 stream sites in October 2004, April 2005, and June 2005 and at 13 stream sites in August 2005 to characterize the quality of surface water in the watershed on a seasonal and spatial basis, as well as to assess the effects of wetlands on water quality. Samples for analysis of benthic macroinvertebrate populations were collected at 11 stream sites in August 2005. Water samples were analyzed for 5 major ions and 32 trace elements. Concentrations of trace elements at sites in the Pike Hill Brook watershed exceeded USEPA National Recommended Water Quality Criteria acute and chronic toxicity standards for aluminum, iron, cadmium, copper, and zinc. Concentrations of copper exceeded the chronic criteria in an unnamed tributary to Cookville Brook in one sample. Concentrations of sulfate, calcium, aluminum, iron, cadmium, copper, and zinc decreased with distance from a site directly downstream from the mine (site 1), as a result of dilution and through sorption and precipitation of the trace elements. Maximum concentrations of aluminum, iron, cadmium, copper, and zinc were observed during spring snowmelt. Concentrations of sulfate, calcium, cadmium, copper, and zinc, and instantaneous loads of calcium and aluminum were statistically different (p<0.05) among the three continuously monitored sites (sites 1, 4, and 5). Instantaneous loads of aluminum, iron, and copper decreased by one to three orders of magnitude from site 1 to a site 1.1 mi downstream (site 4). Instantaneous loads of sulfate were similar between sites 1, 4, and at a site 3 mi downstream (site 5). Instantaneous loads of cadmium and zinc were similar between sites 1 and 4, and loads of iron and copper were similar between sites 4 and 5. Loads of chemical constituents were compared at site 1 (closest to the mine waste piles) and site 5 (near the mouth of Pike Hill Brook and below a majority of the wetlands). Annually, the loads of dissolved cadmium and zinc at site 1 were about five times greater than loads at site 5, and the load of dissolved copper at site 1 was about 17 times greater than at site 5. The ratio of loads for dissolved cadmium, copper, and zinc to total cadmium, copper, and zinc at site 1 was about 1. Samples collected in Pike Hill Brook upstream and downstream from the wetlands during low flows in August 2005 showed that oxidation of ferrous iron and precipitation of iron-hydroxides were probably not affecting trace metals in the wetlands through sorption; however, a significant portion of the iron entering the wetlands was in particulate form and may have transported sorbed copper and other trace metals. Thus, aerobic activity in the wetlands was probably not affecting metal cycling in the watershed. Concentrations and loads of sulfate may be unlikely to define unequivocally the role of the wetlands with regard to anaerobic bacterial sulfate reduction; however, bacterial sulfate removal may have affected loads of sulfate. Loads of copper increased downstream from the wetlands and may reflect the reductive dissolution of ferric hydroxide particulates in anaerobic parts of the wetlands.Concentrations of dissolved iron increased downstream from the wetlands. The most apparent effects on the macroinvertebr

Scientific Investigations Report↗
USGS2010

Factors Affecting Specific-Capacity Tests and their Application--A Study of Six Low-Yielding Wells in Fractured-Bedrock Aquifers in Pennsylvania

This report by the U.S. Geological Survey, prepared in cooperation with the Pennsylvania Department of Environmental Protection, Bureau of Mining and Reclamation, evaluates factors affecting the application of specific-capacity tests in six low-yielding water wells in areas of coal mining or quarrying in Pennsylvania. Factors such as pumping rate, duration of pumping, aquifer properties, wellbore storage, and turbulent flow were assessed by theoretical analysis and by completing multiple well tests, selected to be representative of low-yielding household-supply wells in areas of active coal mining or quarrying. All six wells were completed in fractured-bedrock aquifers--five in coal-bearing shale, siltstone, sandstone, limestone, and coal of Pennsylvanian and Permian age and one in limestone of Cambrian age. The wells were pumped 24 times during 2007-09 at rates from 0.57 to 14 gallons per minute during tests lasting from 22 to 240 minutes. Geophysical logging and video surveys also were completed to determine the depth, casing length, and location of water-yielding zones in each of the test wells, and seasonal water-level changes were measured during 2007-09 by continuous monitoring at each well. The tests indicated that specific-capacity values were reproducible within about ? 20 percent if the tests were completed at the same pumping rate and duration. A change in pumping duration, pumping rate, or saturated aquifer thickness can have a substantial effect on the comparability of repeated tests. The largest effect was caused by a change in aquifer thickness in well YO 1222 causing specific capacity from repeated tests to vary by a factor of about 50. An increase in the duration of pumping from 60 to 180 minutes caused as much as a 62 percent decrease in specific capacity. The effect of differing pumping rates on specific capacity depends on whether or not the larger rate causes the water level in the well to fall below a major water-yielding zone; when this decline happened at well CA 462, specific capacity was reduced by about 63 percent. Estimates of the maximum yield for low-yielding wells that are computed by multiplying the available drawdown by the specific-capacity value may contain large errors if the wells were pumped at low rates that do not cause much water-level drawdown. The estimates of yield are likely to be too large because the effects of lowering the water level in the well below water-yielding zones have not been incorporated. Better yield estimates can be made by the use of step-drawdown tests or by over-pumping at a rate large enough to dewater most of the wellbore. The maximum well yield, after overpumping, can be estimated from the rate of water-level recovery or by subtracting the incremental rate of change of borehole storage at the end of the test from the pumping rate.

Pennsylvania↗
USGS1877

Geology of the Henry Mountains

If these pages fail to give a correct account of the structure of the Henry Mountains the fault is mine and I have no excuse. In all the earlier exploration of the Rocky Mountain Region, as well as in much of the more recent survey, the geologist has merely accompanied the geographer and has had no voice in the determination of either the route or the rate of travel. When the structure of a mountain was in doubt he was rarely able to visit the points which should resolve the doubt, but was compelled to turn regretfully away. Not so in the survey of the Henry Mountains. Geological exploration had shown that they were well disposed for examination, and that they promised to give the key to a type of structure which was at best obscurely known; and I was sent by Professor Powell to make a study of them, without restriction as to my order or method. I was limited only in time, the snow stopping my work two months after it was begun. Two months would be far too short a period in which to survey a thousand square miles in Pennsylvania or Illinois, but among the Colorado Plateaus it proved sufficient. A few comprehensive views from mountain tops gave the general distribution of the formations, and the remainder of the time was spent in the examination of the localities which best displayed the peculiar features of the structure. So thorough was the display and so satisfactory the examination, that in preparing my report I have felt less than ever before the desire to revisit the field and prove my conclusions by more extended observation.

Utah↗
USGS1987

Oblique map of the northern Sierra Nevada, California, showing location of gold-bearing areas

More than a third of the gold produced by the United States was mined in California. The bulk of this gold was recovered from the western slope of the northern half of the Sierra Nevada between the Merced River in the south and the Feather River to the north, a distance of about 170 mi. Gold was first discovered, in this region, on the American River at Coloma in 1848, triggering the famed California gold rush. Mining was continuously active, somewhere in the area, from the discovery of gold until World War II when mining was legally prohibited. Dramatic increases in gold prices in the past decade coupled with recent advances in extractive techniques have revitalized prospecting, and major deposits are currently being explored and developed. Gold has been found in a variety of geologic environments in the region. In addition to production from the complex vein systems of the historically famous Mother Lode and associated East Gold Belt and West Gold Belt, large amounts of gold have also been recovered from the Grass Valley-Nevada City and other isolated lode districts and from Tertiary river channels and Quaternary alluvium. This oblique map illustrates the relation of the different gold-bearing environments to each other and to the general terrain of the northern Sierra Nevada. The map was derived from the 1970 U.S. Geological Survey 1:500,000-scale topographic map of California and the 1976 U.S. Geological Survey 1:500,000-scale topographic map of Nevada, using an isometrograph, a mechanical instrument that produces an oblique framework by tracing individual contours. Form lines sketched over this framework graphically portray the physiographic configuration of the region. Relief on the oblique map has a 3:1 vertical exaggeration and appears as if viewed from a 30&deg; angle above the horizon. Locations of lode gold prospects and mines shown on the map were obtained from the U.S. Geological Survey's Mineral Resource Data System (MRDS), a computerized mineral-resource information file, and plotted in their respective locations (D.F. Huber, written commun., 1986). Some locations from two northern counties, missing from the MRDS retrival, were added. The twenty lode mines believed to be the most productive are cited in table 1. A total of nearly 4,000 sites, including both prospects and mines, were initially plotted, but about a third of those were obscured by topography on the oblique map. Locations of Tertiary river channels and gold-dredging fields were taken from published general references modified by examining specific sources and by cursory field examination. Seven of the major dredge fields are identified in table 2.

California↗
USGS1998

Geology and mineral resources of the Lake Valley area, Sierra County, New Mexico

At the request of the Bureau of Land Management, the U.S. Geological Survey assessed the Lake Valley Area of Critical Environmental Concern (ACEC), which includes the historic Lake Valley townsite and silver-manganese mining district, for undiscovered mineral resources. The Lake Valley ACEC is along the southeastern margin of the Black Range of western Sierra County, New Mexico. The Black Range contains eleven mining districts from which silver, lead, zinc, manganese, copper, gold, and tin have been recovered. As part of the study, an area of over 75 square mi (195 square km) in the area of the Lake Valley ACEC was mapped to understand ore controls and to assess mineral-resource potential. Lake Valley mining district is in Mississippian Lake Valley Formation carbonate rocks, but much of the surrounding terrane consists of volcanic rocks on the southeastern edge of the Emory cauldron which formed about 34.9 Ma. Volcanic rocks are part of the Mogollon-Datil volcanic province which include flows, breccias, ash-flow tuffs, and intrusive rhyolites. The Lake Valley mining district is located about 20 mi (32 km) south of the Late Cretaceous Laramide copper-gold porphyry intrusion at Hillsboro. It is also located at the western boundary of the Rio Grande rift basin.The Lake Valey fault is the major structural feature of the study area. Geological and geophysical data suggest the fault is composed of two segments: a southern, northwest-striking segment that may have a pre-Tertiary history and a northerly-striking segment that is part of the Emory cauldron ring fracture. The mining district is bounded by the southern, northwest-striking segment of the fault which may have up to 800 ft (240m) of normal offset. Deposit types identified in the Black Range, and for which we assess mineral potential, are Laramide porphyry, Laramide skarns, Laramide veins, gold placer, carbonate-hosted, volcanic-epithermal, and rhyolite tin; no Rio Grande Rift baritefluorite-galena deposits are known, but they are included in the assessment. The most likely deposits to be discovered in the Lake Valley district are carbonate-hosted silver-manganese deposits. These deposits could be deposited by hydrothermal fluids or be related to intrusion of Oligocene rhyolite or Laramide porphyry. An aeromagnetic high south of the district probably reflects a small felsic intrusion of unknown age. We assess the Lake Valley ACEC as having low to moderate potential for undiscovered carbonate-hosted deposits associated with volcanic rocks or Laramide porphyry plutons, and low potential for gold placer and rhyolite tin deposits.

New Mexico↗
USGS2013

Environmental consequences of the Retsof Salt Mine roof collapse

In 1994, the largest salt mine in North America, which had been in operation for more than 100 years, catastrophically flooded when the mine ceiling collapsed. In addition to causing the loss of the mine and the mineral resources it provided, this event formed sinkholes, caused widespread subsidence to land, caused structures to crack and subside, and changed stream flow and erosion patterns. Subsequent flooding of the mine drained overlying aquifers, changed the groundwater salinity distribution (rendering domestic wells unusable), and allowed locally present natural gas to enter dwellings through water wells. Investigations including exploratory drilling, hydrologic and water-quality monitoring, geologic and geophysical studies, and numerical simulation of groundwater flow, salinity, and subsidence have been effective tools in understanding the environmental consequences of the mine collapse and informing decisions about management of those consequences for the future. Salt mines are generally dry, but are susceptible to leaks and can become flooded if groundwater from overlying aquifers or surface water finds a way downward into the mined cavity through hundreds of feet of rock. With its potential to flood the entire mine cavity, groundwater is a constant source of concern for mine operators. The problem is compounded by the viscous nature of salt and the fact that salt mines commonly lie beneath water-bearing aquifers. Salt (for example halite or potash) deforms and “creeps” into the mined openings over time spans that range from years to centuries. This movement of salt can destabilize the overlying rock layers and lead to their eventual sagging and collapse, creating permeable pathways for leakage of water and depressions or openings at land surface, such as sinkholes. Salt is also highly soluble in water; therefore, whenever water begins to flow into a salt mine, the channels through which it flows increase in diameter as the surrounding salt dissolves. Some mines leak at a slow rate for decades before a section of rock gives way, allowing what initially was a trickle of water to suddenly become a cascade and finally a torrent. Other mines become flooded and are destroyed when an errant drill hole punctures the mine ceiling, allowing water from overlying sources to flow into the mine. Either scenario can cause catastrophic flooding and permanent loss of the mine. Occasionally, a mine that has remained dry for a century will undergo a roof collapse that results in flooding.

New York↗
USGS2011

Breccia-pipe uranium mining in northern Arizona: Estimate of resources and assessment of historical effects

About 1 million acres of Federal land in the Grand Canyon region of Arizona were temporarily withdrawn from new mining claims in July 2009 by the Secretary of the Interior because of concern that increased uranium mining could have negative impacts on the land, water, people, and wildlife. During a 2-year interval, a Federal team led by the Bureau of Land Management is evaluating the effects of withdrawing these lands for extended periods. As part of this team, the U.S. Geological Survey (USGS) conducted a series of short-term studies to examine the historical effects of breccia-pipe uranium mining in the region. The USGS studies provide estimates of uranium resources affected by the possible land withdrawal, examine the effects of previous breccia-pipe mining, summarize water-chemistry data for streams and springs, and investigate potential biological pathways of exposure to uranium and associated contaminants. This fact sheet summarizes results through December 2009 and outlines further research needs.

Arizona↗
USGS1980

High-resolution seismic-reflection profiling data from the inner continental shelf of southeastern Massachusetts

Six hundred-seventy kilometers of closely spaced high-resolution seismic-­reflection data have been collected from eastern Rhode Island Sound and Vineyard Sound, Mass, by the U.S. Geological Survey in cooperation with the Massachusetts Department of Public Works. These data were obtained during the June 1975 cruise of the R/V ASTERIAS as part of a continuing regional study of the Massachusetts offshore area to assess potential mineral resources, to evaluate environmental impact of mining of resources and of offshore disposal of solid waste and harbor dredge-spoil materials, and to map the offshore geology and shallow structure. The data were obtained by using a surface-towed EG&G Unit Pulse Boomer* (300 joules: 400 Hz-8kHz frequency) sound source. Reflected acoustic energy was detected by a 4.6-m, a-element hydrophone array, was amplified, was actively filtered (400 Hz-4kHz bandpass), and was graphically displayed on an EPC* dry paper recorder at a 0.25-second sweep rate. System resolution was generally 1 to 1.5 m. Navigational control was provided by Loran C (posi­tional accuracy within 0.2 km) and was supplemented by radar and visual fixes. Positional information was logged at 15-minute intervals and at major course changes. The original records may be examined at the Data Library, U.S. Geological Survey, Woods Hole, MA 02543. Microfilm copies of the data are available for purchase from the National Geophysical and Solar-Terrestrial Data Center (NGSDC), Boulder, CO 80302.

Open-File Report↗
USGS2008

Selected Water- and Sediment-Quality, Aquatic Biology, and Mine-Waste Data from the Ely Copper Mine Superfund Site, Vershire, VT, 1998-2007

The data contained in this report are a compilation of selected water- and sediment-quality, aquatic biology, and mine-waste data collected at the Ely Copper Mine Superfund site in Vershire, VT, from August 1998 through May 2007. The Ely Copper Mine Superfund site is in eastern, central Vermont (fig. 1) within the Vermont Copper Belt (Hammarstrom and others, 2001). The Ely Copper Mine site was placed on the U.S. Environmental Protection Agency (USEPA) National Priorities List in 2001. Previous investigations conducted at the site documented that the mine is contributing metals and highly acidic waters to local streams (Hammarstrom and others, 2001; Holmes and others, 2002; Piatak and others, 2003, 2004, and 2006). The U.S. Geological Survey (USGS), in cooperation with the USEPA, compiled selected data from previous investigations into uniform datasets that will be used to help characterize the extent of contamination at the mine. The data may be used to determine the magnitude of biological impacts from the contamination and in the development of remediation activities. This report contains analytical data for samples collected from 98 stream locations, 6 pond locations, 21 surface-water seeps, and 29 mine-waste locations. The 98 stream locations are within 3 streams and their tributaries. Ely Brook flows directly through the Ely Copper Mine then into Schoolhouse Brook (fig. 2), which joins the Ompompanoosuc River (fig. 1). The six pond locations are along Ely Brook Tributary 2 (fig. 2). The surface-water seeps and mine-waste locations are near the headwaters of Ely Brook (fig. 2 and fig. 3). The datasets 'Site_Directory' and 'Coordinates' contain specific information about each of the sample locations including stream name, number of meters from the mouth of stream, geographic coordinates, types of samples collected (matrix of sample), and the figure on which the sample location is depicted. Data have been collected at the Ely Copper Mine Superfund site by the USEPA, the Vermont Department of Environmental Conservation (VTDEC), and the USGS. Data also have been collected on behalf of USEPA by the following agencies: Arthur D. Little Incorporated (ADL), U.S. Army Cold Region Research and Engineering Laboratory (CRREL), URS Corporation (URS), USEPA, and USGS. These data provide information about the aquatic communities and their habitats, including chemical analyses of surface water, pore water, sediments, and fish tissue; assessments of macroinvertebrate and fish assemblages; physical characteristics of sediments; and chemical analyses of soil and soil leachate collected in and around the piles of mine waste.

Data Series↗
USGS1996

Mineral Resources Data System (MRDS)

The U.S. Geological Survey (USGS) operates the Mineral Resources Data System (MRDS), a digital system that contained 111,955 records on Sept. 1, 1995. Records describe metallic and industrial commodity deposits, mines, prospects, and occurrences in the United States and selected other countries. These records have been created over the years by USGS commodity specialists and through cooperative agreements with geological surveys of U.S. States and other countries. This CD-ROM contains the complete MRDS data base, several subsets of it, and software to allow data retrieval and display. Data retrievals are made by using GSSEARCH, a program that is included on this CD-ROM. Retrievals are made by specifying fields or any combination of the fields that provide information on deposit name, location, commodity, deposit model type, geology, mineral production, reserves, and references. A tutorial is included. Retrieved records may be printed or written to a hard disk file in four different formats: ascii, fixed, comma delimited, and DBASE compatible.

Data Series↗
USGS2021

Two-event genesis of Butte lode veins: Geologic and geochronologic evidence from ore veins, dikes, and host plutons

The long-standing ore-genesis model for world-class deposits of the Butte mining district, Montana, is of deep pre-Main Stage porphyry Cu-Mo and overlying Main Stage Ag-Zn-Cu-zoned lode veinsformed from discrete hydrothermal systems related to rhyolite dikes. The lode-specific model describes metals zones that formed in the lode veins as hydrothermal processes diminished in intensity (changing temperature and chemical characteristics) outward from the district center. New geologic and multi-method geochronologic studies pro- vide new timing constraints on the lode veins and reevaluation of geologic relations (Lund and others, 2018), leading to a new model for formation of the lode veins and their relations to stockwork Cu-Mo deposits and igneous events.

Montana↗
USGS2014

Geologic map of the Weka Dur gold deposit, Badakhshan Province, Afghanistan, modified from the 1967 original map compilation of M.P. Guguev and others

This geologic map of the Weka Dur gold deposit located in Badakhshan Province, Afghanistan, is a redrafted and modified version of the Geological map of the Weka Dur area, scale 1:10,000 and Geological map of the Weka Dur deposit, scale 1:2,000 from Guguev and others (1967) (Soviet report no. R1584). That unpublished Soviet report contains the original maps and cross sections, which were prepared in cooperation with the Ministry of Mines and Industries of the Republic of Afghanistan in 1967 under contract no. 1378 (Technoexport, USSR). This USGS publication not only reproduces the geology of the original Soviet maps and cross sections, but also illustrates a mapped adit with reported gold concentrations from sampling within the adit, and shows the location of Soviet trenches along the Weka Dur gold deposit. The Weka Dur gold deposit lies in a cluster of other gold deposits in Badakhshan Province (Ragh district), such as the Kadar, Nesheb Dur, and Rishaw gold occurrences. These gold occurrences lie within a zone of late Hercynian folding and are most likely related to fluids that originated from orogenic processes. The Weka Dur deposit is the largest recorded gold occurrence in Afghanistan and is hosted in Proterozoic mica schist and amphibolite that is intruded by diabase dikes and other intrusive rocks. The tabular orebody is 350 meters (m) long and 2 m wide and can be traced downdip for 110 m. Mineralization consists of ochreous, brecciated schists containing high gold concentrations along gently and steeply dipping fissures. The brecciated rocks grade to 46.7 grams per ton (g/t) silver and contain arsenopyrite, galena, chalcopyrite, and scheelite. Trenches and adits were constructed, mapped, and sampled during the 1960s. Calculated resources are 958.3 kilograms of gold, averaging 4.1 g/t gold.

Badakhshan Province↗
USGS2004

Questa baseline and pre-mining ground-water quality investigation. 1. Depth to bedrock determinations using shallow seismic data acquired in the Straight Creek drainage near Red River, New Mexico

In late May and early June of 2002, the U.S. Geological Survey (USGS) acquired four P-wave seismic profiles across the Straight Creek drainage near Red River, New Mexico. The data were acquired to support a larger effort to investigate baseline and pre-mining ground-water quality in the Red River basin (Nordstrom and others, 2002). For ground-water flow modeling, knowledge of the thickness of the valley fill material above the bedrock is required. When curved-ray refraction tomography was used with the seismic first arrival times, the resulting images of interval velocity versus depth clearly show a sharp velocity contrast where the bedrock interface is expected. The images show that the interpreted buried bedrock surface is neither smooth nor sharp, but it is clearly defined across the valley along the seismic line profiles. The bedrock models defined by the seismic refraction images are consistent with the well data.

New Mexico↗
USGS1994

Principal reference section for part of the Eocene Ghazij Formation, Moghal Mine area, Mach coal field, Balochistan, Pakistan

The information presented on this sheet was collected as part of a joint U.S. Geological Survey-Geological Survey of Pakistan program sponsored by the U.S. Agency for International Development. As a project within this program, the coal-bearing Ghazij Formation (Eocene) was investigated in the northeastern part of Balochistan cast and south of the provincial capital of Quetta. Strata exposed in this area range in age from Permian to Holocene and crop out as a belt of folded and thrusted rocks that form a southeast-facing orocline. In this region of Pakistan, the Ghazij can usually be divided into three parts. The lower part is the thickest (probably more than 1,000 m) and consists of gray-weathering calcareous mudrock (shale, mudstone, and impure claystone) and a few tabular bodies of fine-to medium-grained calcareous sandstone. The middle part (27-300 m) consists of gray-weathering calcareous mudrock and tabular to lenticular bodies of fine-to medium-grained calcareous sandstone; beds of carbonaceous shale and coal are common. The upper part (as thick as 533 m) contains reddish-weathering calcareous mudrock that contains scattered lenticular bodies of fine- to medium-grained calcareous sandstone. Fossil plant debris is common in mudrock of the lower and middle parts of the Ghazij, and bivalves and gastropods are common in the middle part; the upper part of the Ghazij is usually unfossiliferous. This three-fold division of the Ghazij is less distinct in the Johan area. Here, the upper part of the formation is clearly identifiable, but rocks below it are poorly exposed and assigning a stratigraphic level that separates the middle and lower parts of the formation is problematic. Below the upper part of the formation is a thick sequence of greenish-gray calcareous mudrock that contains locally abundant plant debris and isolated bodies of brown-weathering sandstone. Rare carbonaceous shale and even rarer coal are present in the upper part of this sequence, and this interval of the formation might correspond to the middle part of the Ghazji exposed in areas to the north. We propose that, in the Johan area, those rocks below the upper part of the formation be referred to as the main body of the Ghazij (for example, main-body Ghazij). Underlying the Ghazij are the carbonate rocks of the Paleocene Dungan Formation (or its equivalent), and overlying the Ghazij are the mostly carbonate rocks of the Eocene Kirthar Formation (or its equivalent). Both contacts can be conformable or unconformable. All of the pre-Neogene rocks in Balochistan are greatly deformed by the collision of India and Asia. The Ghazij is especially susceptible to regional compressional tectonics because it contains a large amount of shale and is sandwiched between two thick carbonate units. As a result, bedding-plane faults and isoclinal folds are common. As part of our study of the Ghazij Formation, five stratigraphic sections were measured: one near Pir Ismail Ziarat, one in the Sor Range, two in the vicinity of Mach, and one near Johan. Each area's section is published separately.

Balochistan↗