SEARCH · USGS Science

Results for “Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources

USGS1972

Mineral reconnaissance of the southern part of the Wadi Qaraqir quadrangle, Saudi Arabia

Introduction At the end of a field trip to the Wadi as Surr quadrangle (Johnson and Trent, 1967) a few days were spent in the southern part of the adjoinning Wadi Qaraqir quadrangle in order to extend our mineral reconnaissance as far east as the Arabian Plateau. The area examine is shown by the distribution of sample localities on the accompanying map. No mineral deposits of economic interest were seen. The terrain is one of broad plains and low hills that extend westward from the base of a prominent erosional scarp which forms the western edge of the Arabian Plateau. Streams cutting headward into the low-dipping massive sandstone of the Plateau have carved deep canyongs with vertical walls, and outliers of the sandstone are preserved as buttes and erosional forms of varied shapes. There are no permanent settlements in the mapped areas. The one road leads up a tributary of Wadi Qaraqir to some date gardens at the base of the sandstone cliffs. A well-travelled caravan route crosses the passes at Al Khuraytah to reach the Plateau H. St. John Philby strongly recommended that a road be constructed through these passes to provide direct access from Tabuk to the Red Sea coast. Burton (1878) was probably the first European to visit the area. He was searching for mineral deposits and he also located some Nabatcan ruins. Philby in company with R. G. Bogue, U. S. Geological Survey, explored the scarp in the Wadi Qaraqir valley and drove northwestward to Al Khuraytah pass. The geology of the Wadi Qaraqir quadrangle shown on the geologic map of the Northwestern Hijaz (Brown and others, 1963) was compiled from Bogue's work. Our work consisted of making traverses around the hilly area and up accessible wadis. We examined the rocks along the traverse routes and visited target areas that had been selected by examination of aerial photographs. Samples of wadi sediment were collected from fault zones, granite contacts, and areas that showed some evidence of hydrothermal alteration. The work was made possible by the cooperation fo the officials of the Directorate General of Mineral Resources, Ministry of Petroleum and Mineral Resources, who arranged for vehicles and accompanying personnel. We did not have a counterpart Saudi geologist for this portion of our trip.

Open-File Report↗

USGS1975

Mineral deposits in western Saudi Arabia; a preliminary report

Mineral deposits in Saudi Arabia include a variety of deposits which were formed in many geologic environments. These include magmatic and late magmatic deposits in igneous masses, contact metamorphic deposits along the margins of igneous bodies, and stratiform sulfide deposits and veins. Notable deposits of sedimentary origin include deposits of iron oxides and phosphate. Strata-bound massive sulfide deposits containing copper, zinc, and nickel sulfides associated with pyrite and pyrrhotite in complexly deformed volcanic rocks in Saudi Arabia have been the subject of controversy. They are considered by some geologists to be of syngenetic or volcanogenic origin, and by others to be epigenetic. The principal mineral deposits in western Saudi Arabia are localized in mineral belts within tectonic zones that trend northerly, northeasterly, and northwesterly. These belts contain the exploration target areas most promising for future exploration. Noteworthy among these are: 1) the northerly-trending Bidah copper-zinc belt; 2) the Sayid copper-zinc zone; 3) the northwest-trending Nuqrah copper zinc-silver belt; and 4) the north-northwesterly-trending Al Amar belt. Gold and silver deposits are mainly localized in north-trending structural features of the Hijaz geotectonic cycle and northwest Najd trends. Saudi Arabian metal deposits known thus far contain reserves in the 2 billion dollar range. Further exploration should result in discoveries that could significantly increase this amount; Saudi Arabia may well have workable metallic and nonmetallic mineral resources for industrial developments in many parts of the Kingdom. In order to effectively carry on a search for new mineral deposits, the belts should be mapped in detail, with emphasis on the delineation of stratigraphic and structural features that control metallization. In addition, geochemical and geophysical studies should be made of promising areas to outline exploration targets. These targets could then be systematically explored.

Open-File Report↗

USGS1976

Computer-enhanced LANDSAT imagery as a tool for mineral exploration in Alaska

Recent work in the Nabesna and McCarthy quadrangles, Alaska, indicates that computer-enhanced LANDSAT imagery shows many of the known mineral deposits and can help in the prediction of potential mineral occurrences. False color, "simulated natural color" and color ratio techniques, were used successfully in conjunction with a black and white, single band photomosaic of Alaska. Computer techniques involved 2 stages of digital image processing: 1) atmospheric and sun elevation corrections, noise removal, computer mosaicking and change of the data format; and 2) image enhancement, involving data manipulation for maximum discrimination of surface materials and structure. Application of a new technique called a "sinusoidal" stretch gave information not available in other products having standard contrast stretches. We identified several orthogonal sets of linears and found parallel linears to be regularly spaced at approximately 30-35 km intervals. The locations of known mineral occurrences correlate well with the linears. Extensions of known faults and possible locations of hidden intrusive bodies were identified. Analysis of numerous areas of anomalous light reflectance showed that most are associated with known mineral occurrences, altered zones or geochemical anomalies, whereas some are not and may represent unexplored altered zones or mineralized areas worthy of future exploration.

Alaska↗

USGS1979

Geology and porphyry copper-type alteration-mineralization of igneous rocks at the Christmas Mine, Gila County, Arizona

The Christmas copper deposit, located in southern Gila County, Arizona, is part of the major porphyry copper province of southwestern North America. Although Christmas is known for skarn deposits in Paleozoic carbonate rocks, ore-grade porphyry-type copper mineralization also occurs in a composite granodioritic intrusive complex and adjacent mafic volcanic country rocks. This study considers the nature, distribution, and genesis of alteration-mineralization in the igneous rock environment at Christmas. At the southeast end of the Dripping Spring Mountains, the Pennsylvanian Naco Limestone is unconformably overlain by the Cretaceous Williamson Canyon Volcanics, a westward-thinning sequence of basaltic volcanic breccia and lava flows, and subordinate clastic sedimentary rocks. Paleozoic and Mesozoic strata are intruded by Laramide-age dikes, sills, and small stocks of hornblende andesite porphyry and hornblende rhyodacite porphyry, and the mineralized Christmas intrusive complex. Rocks of the elongate Christmas stock, intruded along an east-northeast-trending fracture zone, are grouped into early, veined quartz diorite (Dark Phase), biotite granodiorite porphyry (Light Phase), and granodiorite; and late, unveined dacite porphyry and granodiorite porphyry. Biotite rhyodacite porphyry dikes extending east and west from the vicinity of the stock are probably coeval with biotite granodiorite porphyry. Accumulated normal displacement of approximately 1 km along the northwest-trending Christmas-Joker fault system has juxtaposed contrasting levels (lower, intrusive-carbonate rock environment and upper, intrusive-volcanic rock environment) within the porphyry copper system. K-Ar age determinations and whole-rock chemical analyses of the major intrusive rock types indicate that Laramide calc-alkaline magmatism and ore deposition at Christmas evolved over an extended period from within the Late Cretaceous (~75-80 m.y. ago) to early Paleocene (~63-61 m.y. ago). The sequence of igneous rocks is progressively more alkaline and silicic from basalt to granodiorite. Early (Stage I) chalcopyrite-bornite (-molybdenite) mineralization and genetically related K-silicate alteration are centered on the Christmas stock. K-silicate alteration is manifested by pervasive hornblende-destructive biotitization in the stock, biotitization of basaltic volcanic wall rocks, and a continuous stockwork of K-feldspar veinlets and quartz-K-feldspar veins in the stock and quartz-sulfide veins in volcanic rocks. Younger (Stage II) pyrite-chalcopyrite mineralization and quartz-sericite-chlorite alteration occur in a zone overlapping with but largely peripheral to the zone of Stage I stockwork veins. Within the Christmas intrusive complex, K-silicate-altered rocks in the central stock are flanked east and west by zones of fracture-controlled quartz-sericite alteration and strong pyritization. In volcanic rocks quartz-chlorite-pyrite-chalcopyrite veins are superimposed on earlier biotitization and crosscut Stage I quartz-sulfide veins. Beyond the zones of quartz-sericite alteration, biotite rhyodacite porphyry dikes contain the propylitic alteration assemblage epidote-chlorite-albite-sphene. Chemical analyses indicate the following changes during pervasive alteration of igneous rocks: (1) addition of Si, K, H, S, and Cu, and loss of Fe 3+ and Ca during intense biotitization of basalt; (2) loss of Na and Ca, increase of Fe3+/Fe2+, and strong H-metasomatism during sericitization of quartz diorite; and (3) increase in Ca, Na, and Fe3+/Fe2+, and loss of K during intense propylitization of biotite rhyodacite porphyry dikes. Thorough biotitization of biotite granodiorite porphyry in the Christmas stock was largely an isochemical process. Fluid-inclusion petrography reveals that Stage I veins are characterized by low to moderate populations of moderate-salinity and gas-rich inclusions, and sparse but ubiquitous halite-bearing inclusions. Moderate-salinity an

Open-File Report↗

USGS1980

A topology of mineralization and its meaning for prospecting

Epigenetic mineral deposits are universal members of an orderly spatial-temporal arrangement of igneous rocks, endomorphic rocks, and hydrothermally altered rocks. The association and sequence of these rocks is invariant whereas the metric relations and configurations of the properties of these rocks are unlimited in variety. This characterization satisfies the doctrines of topology. Metric relations are statistical, and their modes are among the better guides to optimal areas for exploration. Metric configurations are graphically irregular and unpredictable mathematical surfaces like mountain topography. Each mineral edifice must be mapped to locate its mineral deposits. All measurements and observations are only positive or neutral for the occurrence of a mineral deposit. Effective prospecting is based on an increasing density of positive data with proximity to the mineral deposit. This means sampling for maximal numbers of positive data, pragmatically the highest ore-element assays at each site, by selecting rock showing maximal development of lode attributes.

Open-File Report↗

USGS1981

Mineral deposits and geology of northern Oman as of 1974

An investigation of the mineral resources of northern Oman was carried out under an agreement between the U. S. Geological Survey and the Ministry of Development, Sultanate of Oman, during late 1973 and early 1974. The purpose of the investigation was to provide an evaluation of the mineral potential of northern Oman and produce recommendations leading toward the utilization of any viable mineral deposits that were found. The widespread copper deposits located within the Semail volcanics appear to be mineable, the iron-nickel laterites developed upon the weathered surface of the Semail ophiolite have economic potential. Manganese and chromite deposits investigated have only a marginal value and are not likely to be of economic importance in the near future. Discovery of economic copper and iron deposits warrants further geologic mapping and mineral exploration in northern Oman. In addition to this, recommendations regarding the organization of a geological and mining group within the Directorate of Petroleum and Minerals are presented.

Open-File Report↗

USGS1982

Mineralization and other geologic factors related to the Morrison Formation in particular the northern two-thirds of the Colorado Plateau region; basic data and factor-analysis results

A vanadium-mercury mineralization factor and five other significant geologic factors were determined by multivariate factor analysis of data for Morrison Formation rock samples from the Colorado Plateau region. The data presented in the report were obtained from an agglomeration of 876 samples which yielded a correlation matrix of 44 variables. The variables consisted of geochemical, petrographic, and geographic location parameters. Mineralization factor scores demonstrate the relative intensity of mineralization in rock samples collected in and around uranium-vanadium ore deposits. The factors affecting composition and texture of the rocks identified from the analysis are: (1) metalliferous mudstones; (2) interstitial carbonate cements; (3) competing sources of different composition; (4) heavy mineral sources; (5) vanadium mineralization; and (6) regional and stratigraphic sampling bias.

Open-File Report↗

USGS1982

Digital data base application to porphyry copper mineralization in Alaska; case study summary

The purpose of this report is to summarize the progress in use of digital image analysis techniques in developing a conceptual model for assessing porphyry copper mineral potential. The study area consists of approximately the southern one-half of the 1? by 3? Nabesna quadrangle in east-central Alaska. The digital geologic data base consists of data compiled under the Alaskan Mineral Resource Assessment Program (AMRAP) as well as digital elevation data and Landsat spectral reflectance data from the Multispectral Scanner System. The digital data base used to develop and implement a conceptual model for porphyry-type copper mineralization consisted of 16 original data types and 18 derived data sets formatted in a grid-cell (raster) structure and registered to a map base in the Universal Transverse Mercator (UTM) projection. Minimum curvature and inverse distance squared interpolation techniques were used to generate continuous surfaces from sets of irregularly spaced data points. Processing requirements included: (1) merging or overlaying of data sets, (2) display and color coding of maps and images, (3) univariate and multivariate statistical analyses, and (4) compound overlaying operations. Data sets were merged and processed to create stereoscopic displays of continuous surfaces. The ratio of several data sets were calculated to evaluate relative variations and to enhance the display of surface alteration (gossans). Factor analysis and principal components analysis techniques were used to determine complex relationships and correlations between data sets. The resultant model consists of 10 parameters that identify three areas most likely to contain porphyry copper mineralization; two of these areas are known occurrences of mineralization and the third is not well known. Field studies confirmed that the three areas identified by the model have significant copper potential.

Open-File Report↗

USGS1983

A preliminary evaluation of stream sediment sampling for the detection of cobalt mineralization in the Bou Azzer District, Morocco

Analyses of 28 stream sediment samples collected in the Bou Azzer district, Morocco, show that this sampling technique may be useful in locating the cobalt arsenide mineralization that exists in this area. The absence of exceptionally high values of cobalt and arsenic, the nearly lognormal distribution of cobalt values, and the lack of correlation between the highest values of cobalt and arsenic were unanticipated results that do not support the use of this sampling technique. However, highest values of several metals, including cobalt, were associated with an identified area of cobalt mineralization, and high cobalt was present near a second area in which cobalt mineralization is suspected. Although probably mostly reflecting the geochemistry of unexposed ultramafic rocks, the association of these metals with mineralization shows that this type of sampling can independently locate areas of known or potential cobalt mineralization.

Open-File Report↗

USGS1984

An evaluation of the applicability of the telluric-electric and audio-magnetotelluric methods to mineral assessment on the Arabian Shield, Kingdom of Saudi Arabia

Feasibility studies of two electromagnetic methods were made in selected areas of the Jabal Hibshi (1:250,000) quadrangle, 26F, in the Kingdom of Saudi Arabia in March of 1983. The methods tested were the natural source-field telluricelectric and audio-magnetotelluric methods developed and extensively used in recent years by the U.S. Geological Survey in some of its domestic programs related to geothermal and mineral resource assessment. Results from limited studies in the Meshaheed district, the Jabal as Silsilah ring complex, and across a portion of the Raha fault zone clearly demonstrate the appropriateness of these sub-regional scale, reconnaissance-type studies to mineral resource assessment. The favorable results obtained are largely attributed to distinctive and large contrasts in the electrical resistivity of the major rock types encountered. It appears that the predominant controlling factor governing the rock resistivities is the amount of contained clay minerals. Accordingly, unaltered (specifically, non-argillic) igneous and metamorphic rocks have very high resistivities; metasedimentary rocks of the Murdama group that contain several percent clay minerals have intermediate values of resistivity; and highly altered rocks, containing abundant clay minerals, have very low values of resistivity. Water-filled fracture porosity may be a secondary, but important, factor in some settings. However, influences from variations in interstitial or intercrystalline, water-filled porosity are probably small because these types of porosity are generally low. It is reasonable to expect similar results in other areas within the Arabian Shield.

Open-File Report↗

USGS1992

Mineral and energy resources of the BLM Roswell Resource Area, east-central New Mexico

The sedimentary formations of the Roswell Resource Area have significant mineral and energy resources. Some of the pre-Pennsylvanian sequences in the Northwestern Shelf of the Permian Basin are oil and gas reservoirs, and Pennsylvanian rocks in Tucumcari basin are reservoirs of oil and gas as well as source rocks for oil and gas in Triassic rocks. Pre-Permian rocks also contain minor deposits of uranium and vanadium, limestone, and associated gases. Hydrocarbon reservoirs in Permian rocks include associated gases such as carbon dioxide, helium, and nitrogen. Permian rocks are mineralized adjacent to the Lincoln County porphyry belt, and include deposits of copper, uranium, manganese, iron, polymetallic veins, and Mississippi-valley-type (MVT) lead-zinc. Industrial minerals in Permian rocks include fluorite, barite, potash, halite, polyhalite, gypsum, anhydrite, sulfur, limestone, dolomite, brine deposits (iodine and bromine), aggregate (sand), and dimension stone. Doubly terminated quartz crystals, called "Pecos diamonds" and collected as mineral specimens, occur in Permian rocks along the Pecos River. Mesozoic sedimentary rocks are hosts for copper, uranium, and small quantities of gold-silver-tellurium veins, as well as significant deposits of oil and gas, COa, asphalt, coal, and dimension stone. Mesozoic rocks contain limited amounts of limestone, gypsum, petrified wood, dinosaur remains, and clays. Tertiary rocks host ore deposits commonly associated with intrusive rocks, including platinum group elements, iron skarns, manganese, uranium and vanadium, molybdenum, polymetallic vein deposits, gold-silver- tellurium veins, and thorium-rare earth veins. Museum-quality quartz crystals in Lincoln County were formed in association with intrusive rocks in the Lincoln County porphyry belt. Industrial minerals in Tertiary rocks include fluorite, vein- and bedded-barite, caliche, limestone, and aggregate. Tertiary and Quaternary sediments host important placer deposits of gold and titanium, and minor silver, uranium occurrences, as well as important industrial commodities, including caliche, limestone and dolomite, and aggregate (sand). Quaternary basalt contains sub-ore-grade uranium, scoria, and clay deposits.

New Mexico↗

USGS1981

Metamorphic mineral assemblages of slightly calcic pelitic rocks in and around the Taconic Allochthon, southwestern Massachusetts and adjacent Connecticut and New York

The mineral assemblages from metamorphosed slightly calcic pelitic rocks of the Taconic Range in southwestern Massachusetts and adjacent areas of Connecticut and New York were studied petrographically and chemically. These rocks vary in metamorphic grade from those below the chloritoid zone through the chloritoid and garnet zones into the kyanite-staurolite zone. Microprobe data on the ferromagnesian minerals show that the sequence of increasing Fe/ (Fe+Mg) value is, from the lowest, chlorite, biotite, hornblende, chloritoid, staurolite, garnet. Hornblende, epidote, garnet, and plagioclase are the most common minerals that carry significant calcium. Biotite is persistently deficient in alkali but is abnormally rich in octahedral aluminum to such an extent that the overall charge balance can be ascribed to an AI=K+ (Fe,Mg) diadochy. Muscovite contains small though persistent amounts of iron and magnesium in octahedral positions but has a variable K/Na ratio, which is potentially useful as a geothermometer. One low-grade muscovite is highly phengitic, but the white micas in rocks from metamorphic grades higher than chloritoid zone do not contain significant phengite components. Chlorite is persistently high in aluminum and so its ratio of divalent ions to aluminum is approximately that of garnet. Many garnets show pronounced zoning in manganese and less pronounced zoning in calcium. Garnet coexisting with hornblende contains a high proportion of the grossularitic component. The calcium content is significant in all the analyzed garnets, except those from a cummingtonite-bearing sample that is free of muscovite. This suggests that in slightly calcic pelitic rocks, calcium-free garnet cannot coexist with muscovite. Most of the mineral assemblages formed in the presence of excess quartz and muscovite. The phase-petrologic analysis, made with the aid of an eight-phase multisystematic model, shows the following major points: 1. Chloritoid and staurolite coexist in a definite interval of prograde metamorphism. 2. Biotite-chloritoid does not constitute an alternative assemblage to garnet-chlorite-muscovite, because the former combination is found predominantly in the presence of the latter combination. Because the garnet contains lime, all five phases are stable together in lowlime pelitic rocks. 3. The first appearance of staurolite in the area does not correspond to the reaction leading to the first intrinsic stable existence of this phase. Inasmuch as the first appearanc,e of staurolite is always in chlorite-bearing as semblages, I suggest that the mapped staurolite zone marker corresponds to a reaction whereby staurolitechlorite becomes stable. The probable lower grade chemical equivalent, for example, chloritoid-aluminum silicate, however, has not been found in the area of study. Several staurolite-forming reactions discussed in the literature are ruled out because of the relative siderophility of the minerals. A second staurolite isograd involves the reaction, chloritoid+chlorite+muscovite= staurolite+biotite. A third isograd involves staurolite+ chlorite=biotite+kyanite; this reaction is postulated on the basis of the observed assemblage biotite-kyanitesta urolite-garnet-muscoviteplagioclase-quartzilmenite. 4. In low-grade rocks, epidote is stable considerably before the first appearance of chloritoid. The nature of the high-aluminum phase in low-grade rocks that leads to the formation of chloritoid remains obscure. The epidote is always rich in ferric iron (pistacite content of about 1/ 4 to 1/3). Garnet-bearing assemblages (with or without epidote) are formed next as metamorphic grade increases. The next more calcium-rich silicate is hornblende, and despite the meager data on assemblages that include hornblende, the first intrinsic appearance of this phase has probably been recorded. At highstaurolite grade, the most calcium-rich assemblage in pelitic rocks is hornblende-garnet-biotite-plagioclase (bytownit

Professional Paper↗

USGS2011

Investigation of the potential for concealed base-metal mineralization at the Drenchwater Creek Zn-Pb-Ag occurrence, northern Alaska, using geology, reconnaissance geochemistry, and airborne electromagnetic geophysics

In 2005, the U.S. Geological Survey, Bureau of Land Management, and State of Alaska cooperated on an investigation of the mineral potential of a southern part of the National Petroleum Reserve in Alaska, Howard Pass quadrangle, to provide background information for future land-use decisions. The investigation incorporated an airborne electromagnetic (EM) survey covering 1,500 mi 2 (~3,900 km 2 ), including flight lines directly over the Drenchwater Creek sediment-hosted Zn-Pb-Ag occurrence, the largest known base-metal occurrence in the survey area. Samples from the mineralized outcrop and rubblecrop contain metal concentrations that can exceed 11 percent Zn+Pb, with appreciable amounts of Ag. Soil samples with anomalous Pb concentrations are distributed near the sulfide-bearing outcrops and along a >2.5 km zone comprising mudstone, shale, and volcanic rocks of the Kuna Formation. No drilling has taken place at the Drenchwater occurrence, so alternative data sources (for example, geophysics) are especially important in assessing possible indicators of mineralization. Data from the 2005 electromagnetic survey define the geophysical character of the rocks at Drenchwater and, in combination with geological and surface-geochemical data, can aid in assessing the possible shallow (up to about 50 m), subsurface lateral extent of base-metal sulfide accumulations at Drenchwater. A distinct >3-km-long electromagnetic conductive zone (observed in apparent resistivity maps) coincides with, and extends further westward than, mineralized shale outcrops and soils anomalously high in Pb concentrations within the Kuna Formation; this conductive zone may indicate sulfide-rich rock. Models of electrical resistivity with depth, generated from inversion of electromagnetic data, which provide alongflight-line conductivity-depth profiles to between 25 and 50 m below ground surface, show that the shallow subsurface conductive zone occurs in areas of known mineralized outcrops and thins to the east. Broader, more conductive rock along the western ~1 km of the geophysical anomaly does not reach ground surface. These data suggest that the Drenchwater deposit is more extensive than previously thought. The application of inversion modeling also was applied to another smaller geochemical anomaly in the Twistem Creek area. The results are inconclusive, but they suggest that there may be a local conductive zone, possibly due to sulfides.

Professional Paper↗

USGS2016

Global stocks of selected mineral-based commodities

Introduction The U.S. Geological Survey, National Minerals Information Center, analyzes mineral and metal supply chains by identifying and describing major components of mineral and material flows from ore extraction, through intermediate forms, to a final product. This report focuses on an important component of the world’s supply chain: the amounts and global distribution of major consumer, producer, and exchange stocks of selected mineral commodities. In this report, the term “stock” is used instead of “inventory” and refers to accumulations of mined ore, intermediate products, and refined mineral-based commodities that are in a form that meets the agreed-upon specifications of a buyer or processor of intermediate products. These may include certain ores such as bauxite, concentrates, smelter products, and refined metals. Materials sometimes referred to as inventory for accounting purposes, such as ore contained in a deposit or in a leach pile, or materials that need to be further processed before they can be shipped to a consumer, are not considered. Stocks may be held (owned) by consumers, governments, investors, producers, and traders. They may serve as (1) a means to achieve economic, social, and strategic goals through government policies; (2) a secure source of supply to meet demand and to mitigate potential shortages in the supply chain; (3) a hedge to mitigate price volatility; and (4) vehicles for speculative investment. The paucity and uneven reliability of data for stocks of ores and concentrates and for material held by producers, consumers, and merchants hinder the accurate estimating of the size and distribution of this portion of the supply chain for certain commodities. This paper reviews the more visible stocks held in commodity exchange warehouses distributed throughout the world.

Scientific Investigations Report↗

USGS2023

Creating oriented and precisely sectioned mineral mounts for in situ chemical analyses—An example using olivine for diffusion chronometry studies

Diffusion chronometry is now a widely applied methodology for determining the rates and timescales of geologic processes from the chemical zoning observed in minerals. Despite the popularity of the method, several challenges still remain during its application, including: (1) the random sectioning of minerals either in thin sections or grain mounts in which both off-center and oblique sections contribute substantial uncertainty to modeled timescales and (2) diffusion anisotropy needs to be accounted for in models, which generally requires determining the principal crystallographic axes of the mineral using electron backscatter diffraction, a technique that is both challenging and limiting because few scanning electron microscopes have an electron backscatter detector. This guide developed by the U.S. Geological Survey focuses on a step-by-step methodology for mounting individually oriented minerals that are sectioned through their cores prior to polishing for analytical work. Using this technique, one can significantly reduce the uncertainties associated with off-center sections and minimize or completely remove the need for determining crystallographic orientation via electron backscatter diffraction analyses. This report is presented as a guide for using the technique on olivine crystals but can be applied to any minerals that can be extracted for analysis. Two variations of the methodology are included here: (1) The individual crystal method that entails mounting individually sectioned single crystals and crystal groups and (2) the whole mount method in which multiple single crystals or crystal clusters are mounted and sectioned at the same time.

Techniques and Methods↗

USGS1984

FEDERAL MINERAL LAND INFORMATION SYSTEM.

The ability of geographic information systems to combine point, line, and areal data has been widely documented, although the establishment of a particular data base presents its own unique problems. The U. S. Geological Survey is developing a geographic information system consisting of information on Federal surface ownership, Federal subsurface mineral rights, location of actual mineral occurrences and (or) known potential, and formal restrictions to mineral development. By utilizing information already compiled or soon to be collected by other agencies, the Federal Mineral Land Information System should be able to provide answers relating to mineral availability on public lands.

Conference Paper↗

USGS1988

COEXISTING GALENA, PbS//S//S AND SULFOSALTS: EVIDENCE FOR MULTIPLE EPISODES OF MINERALIZATION IN THE ROUND MOUNTAIN AND MANHATTAN GOLD DISTRICTS, NEVADA.

Studies of galena and Pb-Bi-Ag-Cu(Hg) sulfosalts of varied compositions in the Round Mountain and Manhattan gold districts of Nevada corroborate the occurrence of several distinct mineralized systems characterized by different mineral compositions and assemblages. The different episodes of mineralization are related to different Cretaceous and Tertiary magmatic-hydrothermal events, although the assignment of specific mineral compositions and associations with dated mineralized systems is still incomplete. At the Fairview mine, galena associated with Pb-Bi-Ag sulfosalts and simple sulfides occurs as intergrowths of discretely different composition controlled by silver and bismuth content. A galena-type phase (Pbs//s//s) with solid solution toward matildite, AgBiS//2(composition Gal//6//0Mat//4//0) was found. If silver and, to a lasser extent, bismuth are absent, the galena formed will be almost pure PbS. Some minor antimony may substitute for bismuth. This study confirms a linear relationship between a cell edge and Ag-Bi(Sb) content for galena containing less than about 15 wt. percent Ag and Bi(Sb).

Canadian Mineralogist↗

USGS1987

ECONOMICS AND THE SEARCH FOR OFFSHORE HEAVY MINERAL DEPOSITS.

This paper examines the relative importance, in terms of a deposit's commercial status, of physical characteristics of onshore titanium-bearing heavy-mineral placer deposits, and applies these findings to the search for and evaluation of offshore deposits. Results obtained by applying statistical discriminant analysis show that the characteristics most useful for predicting a deposit's commercial status are the grades of the constituent titanium minerals and the size of the deposit. Heavy-mineral grade or even the combined grades of all titanium-bearing minerals (without information and constituent mineral grades) are inferior predictors of a deposit's commercial status. When data from homogeneous regions are analyzed separately, the ability to accurately predict the deposit's commerical status improves.

Marine Mining↗