USGS Science⌕ Search

SEARCH · USGS Science

Results for “Engineering Structures”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources
USGS2007

Minimizing noise in fiberglass aquaculture tanks: Noise reduction potential of various retrofits

Equipment used in intensive aquaculture systems, such as pumps and blowers can produce underwater sound levels and frequencies within the range of fish hearing. The impacts of underwater noise on fish are not well known, but limited research suggests that subjecting fish to noise could result in impairment of the auditory system, reduced growth rates, and increased stress. Consequently, reducing sound in fish tanks could result in advantages for cultured species and increased productivity for the aquaculture industry. The objective of this study was to evaluate the noise reduction potential of various retrofits to fiberglass fish culture tanks. The following structural changes were applied to tanks to reduce underwater noise: (1) inlet piping was suspended to avoid contact with the tank, (2) effluent piping was disconnected from a common drain line, (3) effluent piping was insulated beneath tanks, and (4) tanks were elevated on cement blocks and seated on insulated padding. Four combinations of the aforementioned structural changes were evaluated in duplicate and two tanks were left unchanged as controls. Control tanks had sound levels of 120.6 dB re 1 ??Pa. Each retrofit contributed to a reduction of underwater sound. As structural changes were combined, a cumulative reduction in sound level was observed. Tanks designed with a combination of retrofits had sound levels of 108.6 dB re 1 ??Pa, a four-fold reduction in sound pressure level. Sound frequency spectra indicated that the greatest sound reductions occurred between 2 and 100 Hz and demonstrated that nearby pumps and blowers created tonal frequencies that were transmitted into the tanks. The tank modifications used during this study were simple and inexpensive and could be applied to existing systems or considered when designing aquaculture facilities. ?? 2007 Elsevier B.V. All rights reserved.

Aquacultural Engineering↗
USGS2023

Turbulence near a sandbar island in the lower Missouri River

River turbulence is spatially variable due to interactions between morphology of rivers and physical mechanics of flowing water. Understanding the variation of turbulence in rivers is important for characterizing transport processes of soluble and particulate materials in these systems. We present an exploratory effort to understand ecologically relevant flow patterns using measurements of mean flow and turbulence in a highly engineered river channel around an island in the lower Missouri River. Specifically, the profiles of mean river velocities were investigated to examine the logarithmic relation and associated parameters, including shear velocity and bed roughness. Turbulence intensity and Reynolds shear stress were compared with classic open-channel profiles and previously reported river data in the hydraulics literature. With the capability of pulse-to-pulse coherent Doppler velocity profiling in high spatial resolution, we estimated the profiles of turbulence dissipation rate using resolved one-dimensional velocity spectra. These measurement data allow us to examine the validity of turbulence production-dissipation balance and the classic open-channel profiles of turbulence statistics, including turbulence intensity, Reynolds shear stress, dissipation rate, and eddy viscosity. The field data show a strong variation of turbulence profiles in close vicinity of the river island. In shallow water depths close to the island, turbulence is substantially enhanced in comparison with classic open-channel profiles. Such turbulence enhancement is likely attributed to non-uniformity of the flow structures.

Missouri↗
USGS1988

Methane hydrate - A major reservoir of carbon in the shallow geosphere?

Methane hydrates are solids composed of rigid cages of water molecules that enclose methane. Sediment containing methane hydrates is found within specific pressure-temperature conditions that occur in regions of permafrost and beneath the sea in outer continental margins. Because methane hydrates are globally widespread and concentrate methane within the gas-hydrate structure, the potential amount of methane present in the shallow geosphere at subsurface depths of < ???2000 m is very large. However, estimates of the amount are speculative and range over about three orders of magnitude, from 2 ?? 103 to 4 ?? 106 Gt (gigatons = 1015 g) of carbon, depending on the assumptions made. The estimate I favor is ??? 1 ?? 104 Gt of carbon. The estimated amount of organic carbon in the methane-hydrate reservoir greatly exceeds that in many other reservoirs of the global carbon cycle - for example, the atmosphere (3.6 Gt); terrestrial biota (830 Gt); terrestrial soil, detritus and peat (1960 Gt); marine biota (3 Gt); and marine dissolved materials (980 Gt). In fact, the amount of carbon may exceed that in all fossil fuel deposits (5 ?? 103 Gt). Because methane hydrates contain so much methane and occur in the shallow geosphere, they are of interest as a potential resource of natural gas and as a possible source of atmospheric methane released by global warming. As a potential resource, methane hydrates pose both engineering and production problems. As a contributor to a changing global climate, destabilized methane hydrates, particularly those in shallow, nearshore regions of the Arctic Ocean, may have some effect, but this effect will probably be minimal, at least during the next 100 years. ?? 1988.

Chemical Geology↗
USGS2007

River enhancement in the Upper Mississippi River basin: Approaches based on river uses, alterations, and management agencies

The Upper Mississippi River is characterized by a series of locks and dams, shallow impoundments, and thousands of river channelization structures that facilitate commercial navigation between Minneapolis, Minnesota, and Cairo, Illinois. Agriculture and urban development over the past 200 years have degraded water quality and increased the rate of sediment and nutrient delivery to surface waters. River enhancement has become an important management tool employed to address causes and effects of surface water degradation and river modification in the Upper Mississippi River Basin. We report information on individual river enhancement projects and contrast project densities, goals, activities, monitoring, and cost between commercially non-navigated and navigated rivers (Non-navigated and Navigated Rivers, respectively). The total number of river enhancement projects collected during this effort was 62,108. Cost of all projects reporting spending between 1972 and 2006 was about US$1.6 billion. Water quality management was the most cited project goal within the basin. Other important goals in Navigated Rivers included in-stream habitat improvement and flow modification. Most projects collected for Non-navigated Rivers and their watersheds originated from the U.S. Department of Agriculture (USDA). The U.S. Army Corps of Engineers and the USDA were important sources for projects in Navigated Rivers. Collaborative efforts between agencies that implement projects in Non-navigated and Navigated Rivers may be needed to more effectively address river impairment. However, the current state of data sources tracking river enhancement projects deters efficient and broad-scale integration. ?? Journal compilation ?? 2007 Society for Ecological Restoration International.

Restoration Ecology↗
USGS2024

Representation of surface-water flows using Gradient-Related Discharge in an Everglades Network

The Everglades Depth Estimation Network interpolates water-level gage data to produce daily water-level elevations for the Everglades in south Florida. These elevations were used to estimate flow vectors (gradients and directions) and volumetric flow rates using the Gradient-Related Discharge in an Everglades Network (GARDEN) application developed by the U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers. Flow rates in both the east-west and north-south directions were computed on a 400-meter square grid using modified parameters in the Manning’s equation. The frictional resistance parameter in the Manning’s equation was calibrated to measured flow rates at coastal creeks fed by Everglades Depth Estimation Network boundary flows. Levees and other features that act as barriers to flow were defined as “no-flow” grid cells where vectors were set to zero. The flow volume magnitudes were calibrated with 2020 daily values of coastal river flows, and verification was performed using 2021 data. Within a given day, the measured coastal river flows fluctuate more than the GARDEN boundary flows because of tidal and wind forcings. Because the GARDEN boundary flows were the upstream water source for the coastal rivers, calibration focused on matching average daily flow volumes rather than daily fluctuations. The Pearson’s correlation coefficient is 0.766 for the 2020 calibration period and 0.566 for the 2021 verification period. Applying GARDEN to periods with hydraulic-control-structure releases allows the propagation of structure flows to be seen in the daily flow-vector maps along with the multiday response of flows farther downgradient. Flow vectors may be overestimated near control structures because of difficulties in resolving the water gradient downstream from the structure. Flow vectors farther from the structure are more accurate than those near the structure.

Florida↗
USGS1979

Summary of hydrologic data for Tampa Bypass Canal System, July 1974 to September 1976

The Tampa Bypass Canal is part of a flood-control project east of the city of Tampa under construction by the U.S. Army Corps of Engineers. It will divert floodwater from the Hillsborough River at points upstream from Tampa through a canal system to McKay Bay. The U.S. Geological Survey began a hydrologic data program in 1974 to provide data needed to identify existing hydrologic conditions and to evaluate the effects of canal construction. A network of surface-water and ground-water sites was designed to monitor changes in nutrients, trace metals, major inorganic constituents, pesticides, and benthic invertebrates along the canal system; to monitor changes in trace elements, common constituents, nitrates, specific conductance, and chlorides in the Floridan aquifer; and to monitor changes in the potentiometric surface of the Floridan aquifer. In 1974-75, the monitoring program consisted of drilling 12 monitor wells and initiation of the surface-water sampling program. In 1976, the program consisted of drilling five additional wells, continuation of the surface-water sampling, initiation of ground-water sampling program, and monitoring of discharge from springs. Water-quality data for nine surface-water sites in the basin were collected at each of the control structure sites, in the tidal portion of the canal, and at each of the major tributaries to the canal system. Fifteen ground-water sites were sampled annually to provide information on ground-water quality. Ten wells were sampled semiannually for dissolved chloride concentrations to provide information on the freshwater-saltwater interface. Ground-water levels were collected at 34 wells in the areas adjacent to the canal to monitor changes in the potentiometric surface in the Floridan aquifer. Discharge measurements from springs along the canal system were made in 1969-73 and 1976 to provide data on the quantity of ground water entering the canal. A daily discharge station was operated at structure S-160 to determine quantity of water flowing from the canal system into the bay.

Florida↗
USGS1996

Description and field analysis of a coupled ground-water/surface-water flow model (MODFLOW/BRANCH) with modifications for structures and wetlands in southern Dade County, Florida

A coupled surface-water model (BRANCH) and ground-water model (MODFLOW) model were tested to simulate the interacting wetlands/surface-water/ ground-water system of southern Dade County. Several options created for the MODFLOW ground- ground-water model were used in representing this field situation. The primary option is the MODBRANCH interfacing software, which allows leakage to be accounted for between the MODFLOW ground-water model and the BRANCH dynamic model for simulation of flow in an interconnected network of open channels. A modification to an existing software routine, which is referred to as BCF2, allows cells in MODFLOW to rewet when dry--a requirement in representing the seasonal wetlands in Dade County. A companion to BCF2 is the modified evapotranspiration routine EVT2. The EVT2 routine changes the cells where evapotranspiration occurs, depending on which cells are wet. The Streamlink package represents direct connections between the canals and wetlands at locations where canals open directly into overland flow. Within the BRANCH model, the capability to represent the numerous hydraulic structures, gated spillways, gated culverts, and pumps was added. The application of these modifications to model surface-water/ground-water interactions in southern Dade County demonstrated the usefulness of the coupled MODFLOW/BRANCH model. Ground-water and surface-water flows are both simulated with dynamic models. Flow exchange between models, intermittent wetting and drying, evapotranspiration, and hydraulic structure operations are all represented appropriately. Comparison was made with a simulation using the RIV1 package instead of MODBRANCH to represent the canals. RIV1 represents the canals by user-defined stages, and computes leakage to the aquifer. Greater accuracy in reproducing measured ground- water heads was achieved with MODBRANCH, which also computes dynamic flow conditions in the canals, unlike RIV1. The surface-water integrated flow and transport two-dimensional model (SWIFT2D) was also applied to the southeastern coastal wetlands for comparison with the wetlands flow approximation made in MODFLOW. MODFLOW simulates the wetlands as a highly conductive upper layer of the aquifer, whereas SWIFT2D solves the hydrodynamic equations. Comparison in this limited test demonstrated no specific advantage for either method of representation. However, much additional testing on a wider variety of geometric and hydraulic situations, such as in areas with greater tidal or other dynamic forcing effects, is needed to make definite conclusions. A submodel of the existing southern Dade County model schematization was used to examine water-delivery alternatives proposed by the U.S. Army Corps of Engineers. For this application, the coupled MODFLOW/BRANCH model was used as a design tool. A new canal and several pumps to be tested to maintain lower water levels in a residential area (while water levels in the Everglades are raised) were added to the model schematization. The pumps were assumed to have infinite supply capacity in the model so that their maximum pumping rates during the simulation could be used to determine pump sizes.

Water-Resources Investigations Report↗
USGS2021

Response study of a 51-story-tall Los Angeles, California building inferred from motions of the Mw7.1 July 5, 2019 Ridgecrest, California earthquake

A 51-story building in downtown Los Angeles that is equipped with a seismic monitoring accelerometric array recorded the Mw7.1 Ridgecrest, California earthquake of July 5, 2019. The building is a dual-core reinforced-concrete shear-wall and perimeter-column structure with ~ 80% of floors constructed as post-tensioned flat slabs, which makes it a trending design. Using system identification methods, spectral analyses, and coherence-phase angle computations, the recorded response data allowed the identification of dynamic response characteristics (fundamental frequencies of [NS] 0.21 Hz, [EW] 0.28 Hz, and [Torsional] 0.45 Hz, critical damping percentages < 2.5%, and associated mode shapes), as well as computation of drift ratios with maximum peaks of 0.145% for both NS and EW directions. The critical damping percentages are consistent with those recommended by LATBSDC ( 2017 ). There is no indication from the records that post-tensioned slab design played any role in altering the dynamic characteristics.

California↗
USGS2022

Water-level data for the Albuquerque Basin and adjacent areas, central New Mexico, period of record through September 30, 2021

The Albuquerque Basin, located in central New Mexico, is about 100 miles long and 25–40 miles wide. The basin is hydrologically defined as the extent of consolidated and unconsolidated deposits of Tertiary and Quaternary age that encompasses the structural Rio Grande Rift between San Acacia to the south and Cochiti Lake to the north. A 20-percent population increase in the basin from 1990 to 2000 and a 22-percent population increase from 2000 to 2010 resulted in an increased demand for water in areas within the basin. Drinking-water supplies throughout the basin were obtained primarily from groundwater resources until December 2008, when the Albuquerque Bernalillo County Water Utility Authority (ABCWUA) began treatment and distribution of surface water from the Rio Grande through the San Juan-Chama Drinking Water Project. An initial network of wells was established by the U.S. Geological Survey (USGS) in cooperation with the City of Albuquerque from April 1982 through September 1983 to monitor changes in groundwater levels throughout the Albuquerque Basin. In 1983, this network consisted of 6 wells with analog-to-digital recorders and 27 wells where water levels were measured monthly. As of water year 2021, the network consisted of 120 wells and piezometers at 54 locations. The USGS, in cooperation with the ABCWUA, the New Mexico Office of the State Engineer, and Bernalillo County, measures water levels at the wells and piezometers in the network; this report, prepared in cooperation with the ABCWUA, presents water-level data collected by USGS personnel at the sites through water year 2021 (October 1, 2020, through September 30, 2021). Water-level data that were collected in previous water years from wells that were later discontinued were published in previous USGS reports.

New Mexico↗
USGS2005

Surface-geophysical investigation of a formerly used defense site, Machiasport, Maine, February 2003

Surface-geophysical surveys were conducted in February 2003 at a formerly used defense site in Maine, where residual chlorinated solvents are affecting off-site domestic water-supply wells. The U.S. Geological Survey and Argonne National Laboratory used surface-geophysical methods, including ground-penetrating radar and seismic-refraction tomography, to characterize the lithology and structure of the bedrock at the site and to identify highly fractured areas that may provide pathways for ground-water flow and contaminant transport. Multifrequency electromagnetic and inductive terrain-conductivity methods also were evaluated, but these techniques were adversely affected by a nearby naval computer and telecommunications station. Interpretation of the data from ground-penetrating radar indicates that depth to the weathered bedrock surface is approximately 0.5 to 3 meters. Reflections from within the bedrock are visible throughout all ground-penetrating radar profiles, and zones of scattered electromagnetic energy may correlate to zones of highly fractured bedrock. Interpretation of the data from seismic-refraction tomography inversion indicates that zones of relatively low seismic velocity and topographic lows may correlate with fractured and water-producing intervals within the bedrock. Integrated interpretation of the results from ground-penetrating radar and seismic-refraction tomography was used to locate boreholes along the surface-geophysical profiles. An integrated analysis of information obtained from the surface- and borehole-geophysical surveys and test drilling will be used by the U.S. Army Corps of Engineers to develop a conceptual model of ground-water flow and solute transport at the site.

Maine↗
USGS1993

Applications of research from the U.S. Geological Survey program, assessment of regional earthquake hazards and risk along the Wasatch Front, Utah

INTERACTIVE WORKSHOPS: ESSENTIAL ELEMENTS OF THE EARTHQUAKE HAZARDS RESEARCH AND REDUCTION PROGRAM IN THE WASATCH FRONT, UTAH: Interactive workshops provided the forum and stimulus necessary to foster collaboration among the participants in the multidisciplinary, 5-yr program of earthquake hazards reduction in the Wasatch Front, Utah. The workshop process validated well-documented social science theories on the importance of interpersonal interaction, including interaction between researchers and users of research to increase the probability that research will be relevant to the user's needs and, therefore, more readily used. REDUCING EARTHQUAKE HAZARDS IN UTAH: THE CRUCIAL CONNECTION BETWEEN RESEARCHERS AND PRACTITIONERS: Complex scientific and engineering studies must be translated for and transferred to nontechnical personnel for use in reducing earthquake hazards in Utah. The three elements needed for effective translation, likelihood of occurrence, location, and severity of potential hazards, and the three elements needed for effective transfer, delivery, assistance, and encouragement, are described and illustrated for Utah. The importance of evaluating and revising earthquake hazard reduction programs and their components is emphasized. More than 30 evaluations of various natural hazard reduction programs and techniques are introduced. This report was prepared for research managers, funding sources, and evaluators of the Utah earthquake hazard reduction program who are concerned about effectiveness. An overview of the Utah program is provided for those researchers, engineers, planners, and decisionmakers, both public and private, who are committed to reducing human casualties, property damage, and interruptions of socioeconomic systems. PUBLIC PERCEPTIONS OF THE IMPLEMENTATION OF EARTHQUAKE MITIGATION POLICIES ALONG THE WASATCH FRONT IN UTAH: The earthquake hazard potential along the Wasatch Front in Utah has been well defined by a number of scientific and engineering studies. Translated earthquake hazard maps have also been developed to identify areas that are particularly vulnerable to various causes of damage such as ground shaking, surface rupturing, and liquefaction. The implementation of earthquake hazard reduction plans are now under way in various communities in Utah. The results of a survey presented in this paper indicate that technical public officials (planners and building officials) have an understanding of the earthquake hazards and how to mitigate the risks. Although the survey shows that the general public has a slightly lower concern about the potential for economic losses, they recognize the potential problems and can support a number of earthquake mitigation measures. The study suggests that many community groups along the Wasatch Front, including volunteer groups, business groups, and elected and appointed officials, are ready for action-oriented educational programs. These programs could lead to a significant reduction in the risks associated with earthquake hazards. A DATA BASE DESIGNED FOR URBAN SEISMIC HAZARDS STUDIES: A computerized data base has been designed for use in urban seismic hazards studies conducted by the U.S. Geological Survey. The design includes file structures for 16 linked data sets, which contain geological, geophysical, and seismological data used in preparing relative ground response maps of large urban areas. The data base is organized along relational data base principles. A prototype urban hazards data base has been created for evaluation in two urban areas currently under investigation: the Wasatch Front region of Utah and the Puget Sound area of Washington. The initial implementation of the urban hazards data base was accomplished on a microcomputer using dBASE III Plus software and transferred to minicomputers and a work station. A MAPPING OF GROUND-SHAKING INTENSITIES FOR SALT LAKE COUNTY, UTAH: This paper documents the development of maps showing a

Professional Paper↗
USGS2026

Regreening, restoring, and reconnecting a southwestern wetland ecosystem – the Zeedyk wetland

Alluvial wetland ecosystems are vital as biodiversity hotspots but are increasingly threatened by anthropogenic stressors and drought. These pressures are especially acute in arid and semi-arid regions, where eco-hydrologic connectivity is fragile and recovery is slow. This study quantifies the efficacy of nature-based solutions, particularly the ‘Zeedyk approach,’ which employs low-tech Natural Infrastructure in Dryland Streams (NIDS)—including rock detention structures—to slow surface water, raise groundwater tables, and restore wetland function at a spring-fed wetland in Cebolla Canyon, New Mexico, U.S.A. Our results depict a Restoration Feedback Loop that captures stages of change from a healthy wetland in 1935, altered by 20th-century agriculture and grazing, to the re-establishment of the historical flow regime by 2024 documented through an 89-year archive of aerial imagery (1935–2024). By the end of our study period, the Spring-Fed Wetland had expanded by roughly 229% of the original 1935 area, to 4.13 ha. Using 40 years of satellite data, we assess changes in vegetation and hydrology with remote sensing indices. Spatial and temporal analyses reveal significant increases in vegetation greenness and wetness, particularly in an Expanded Wetland subregion, which exhibited ∼3.5x higher wetness and ∼1.5x higher greenness trends compared to adjacent areas. Monthly metrics highlight seasonal variability, with increases in greenness linked to monsoonal rainfall and lateral water redistribution, indicating that restoration impacts extend beyond the primary wetland. This study demonstrates the utility of cloud-based platforms like Google Earth Engine and USGS EarthExplorer for long-term monitoring of wetland restoration, while quantifying the efficacy of the ‘Zeedyk approach’ and demonstrating its potential as a scalable method to restore and conserve wetland meadows in other arid and semi-arid landscapes.

New Mexico↗
USGS2025

Habitat and predator influences on the spatial ecology of nine-banded armadillos

Mesopredator suppression has implications for community structure, biodiversity, and ecosystem function, but mesopredators with physical defenses may not avoid apex predators. We investigated nine-banded armadillos ( Dasypus novemcinctus ) in southwestern Oklahoma (USA) to evaluate if a species with physical defenses was influenced by a dominant predator, the coyote ( Canis latrans ). We sampled nine-banded armadillos and coyotes with motion-activated cameras. We used single-species and conditional two-species occupancy models to assess the influences of environmental factors and coyotes on nine-banded armadillo occurrence and site-use intensity (i.e., detection). We used camera-based detections to characterize the diel activity of each species and their overlap. Nine-banded armadillo occupancy was greater at sites closer to cover, with lower slopes, and further from water, whereas coyote space use was greater at higher elevations; both species were positively associated with recent burns. Nine-banded armadillo occurrence was not influenced by coyotes, but site-use intensity was suppressed by the presence of coyotes. Nine-banded armadillos (strictly nocturnal) and coyotes (predominantly nocturnal) had a high overlap in summer diel activity. Nine-banded armadillos are ecosystem engineers but are often considered a threat to species of concern and/or a nuisance. Thus, understanding the role of interspecific interactions on nine-banded armadillos has important implications for conservation and management.

Oklahoma↗
USGS2024

Developing international standards and guidelines for disseminating and validating simulated ground motions

We are leading an effort to develop international standards and guidelines for curating, disseminating, and validating simulated ground-motion data. This effort is organized as a working group within the Consortium of Organizations for Strong Motion Observation Systems (COSMOS). In 2022 we held online workshops on 7 and 8 June and 20 October. The first workshop focused on curating and disseminating simulated ground-motion data. The second workshop focused on validating simulated ground-motions for engineering applications. About 100 people participated in each of the workshops with strong representation from North America, Europe, and western Asia. In the coming year, we intend to form a technical committee to draft the international guidelines and standards while continuing to engage stakeholders from across the globe through online and in-person meetings. The key points from the workshops include: (1) Numerous groups are generating simulated earthquake ground motions and making them openly available; however there is very little coordination among groups to provide consistent interfaces for searching and retrieving data; (2) Standardizing interfaces for metadata and data access should consider agile approaches that can adapt to changing capabilities and user needs while building upon existing efforts; (3) A distributed architecture is preferred by most participants to allow institutions to host and manage their own data while broadcasting their holdings to a combined catalog; (4) Validation of ground-motion simulations applies to the entire workflow for simulating earthquake ground-motions, including the rupture model, seismic velocity model, and seismic wave propagation software; (5) Metrics to evaluate the validation are application dependent; more research is needed to tie structural response characteristics to ground-motion characteristics; and (6) Validation results should provide a clear, transparent, and quantitative assessment of the simulated ground motions.

Conference Paper↗
USGS1983

Shallow structure and stratigraphy of the carbonate West Florida continental slope and their implications to sedimentation and geohazards

An 1800-joule sparker survey of the West Florida continental slope between about 26?N and 29?15?N showed a top bed of Pleistocene age forming an irregular drape over a surface that is probably Pliocene. The contact between the top two layers is unconformable in the south and, in some places, shows karst collapse and solution features. Karst topography grades into a more hummocky erosional surface to the north, which in turn smoothes out; the contact become conformable still further north. A period of folding, which is widespread over the outer portion of the study area and which may be related to large scale mass wasting, occurred at about the same time represented by the unconformity. Significant subsidence has occurred as late as Pleistocene. The surface layer thins to a minimum (0 in the south) at about 525-meters water depth and then thickens again dramatically to the west, downslope. This thinning is interpreted to be due to the Loop Current, which flows from north to south in the area and which acts to block deposition and scour the bottom. Despite the fact that the margin is dominated by carbonates, usually associated with low sedimentation rates, there is widespread evidence of mass wasting affecting ancient and surficial deposits on the outer part of the upper slope. Three potential groups of geohazards identified are: 1. Potential bottom failure in areas where a thin top layer overlies the karst surface. 2. Potential for sliding and slumping. 3. Scour due to currents which could also affect drilling and engineering activities.

Open-File Report↗
USGS1997

Effect of wave-enhanced bottom friction on storm-driven circulation in Massachusetts Bay

Massachusetts Bay is a shallow (35 m average depth) semienclosed embayment, roughly 100 ?? 50 km, which opens into the Gulf of Maine at its eastern boundary. Surface waves associated with winter storm winds from the northeast cause large sediment resuspension events, and wave and circulation fields during these events have a quasi-steady response to the wind stress. Coupled wave, circulation, and boundary layer models indicate that wave-enhanced bottom friction has a significant damping effect on storm-driven circulation in Massachusetts Bay. The simulated response exhibits significant three-dimensional structure, but still can be fundamentally understood using idealized models. The depth-integrated momentum balance is dominated by along-bay stress, pressure gradient, and bottom stress. The effective bottom drag coefficient during typical storm conditions is increased by a factor of 2-5 when wave effects are included, but the mean bottom stress is relatively unaffected by wave effects due to a reduction in bottom currents by 30-50%. The vertical mixing is also relatively unaffected by the waves, and the result is that the increased drag causes a nearly depth-independent offset of the vertical current profiles. The alongshore transport in the bay is reduced 10-50%, depending on wind direction.

Cape Cod Bay, Massachussetts Bay↗
USGS2007

Study of a prehistoric landslide using seismic reflection methods integrated with geological data in the Wasatch Mountains, Utah, USA

An integration of geological and geophysical techniques characterizes the internal and basal structure of a landslide along the western margin of the Wasatch Mountains in northern Utah, USA. The study area is within a region of planned and continuing residential development. The Little Valley Landslide is a prehistoric landslide as old as 13??ka B.P. Drilling and trenching at the site indicate that the landslide consists of chaotic and disturbed weathered volcanic material derived from Tertiary age volcanic rocks that comprise a great portion of the Wasatch Range. Five short high-resolution common mid-point seismic reflection profiles over selected portions of the site examine the feasibility of using seismic reflection to study prehistoric landslides in the Wasatch Mountain region. Due to the expected complexity of the near-surface geology, we have pursued an experimental approach in the data processing, examining the effects of muting first arrivals, frequency filtering, model-based static corrections, and seismic migration. The results provide a framework for understanding the overall configuration of the landslide, its basal (failure) surface, and the structure immediately underlying this surface. A glide surface or de??collement is interpreted to underlie the landslide suggesting a large mass movement. The interpretation of a glide surface is based on the onset of coherent reflectivity, calibrated by information from a borehole located along one of the seismic profiles. The glide surface is deepest in the center portion of the landslide and shallows up slope, suggesting a trough-like feature. This study shows that seismic reflection techniques can be successfully used in complex alpine landslide regions to (1) provide a framework in which to link geological data and (2) reduce the need for an extensive trenching and drilling program. ?? 2007 Elsevier B.V. All rights reserved.

Engineering Geology↗
USGS2016

Application of ground penetrating radar for identification of washover deposits and other stratigraphic features: Assateague Island, MD

A combination of ground penetrating radar (GPR) data, core data, and aerial photographs were analyzed to better understand the evolution of two portions of Assateague Island, Maryland. The focus of the study was to investigate the applicability of using GPR data to image washover deposits in the stratigraphic record. High amplitude reflections observed in two shore-perpendicular GPR profiles were correlated to shallow (<1 m) lithologic contacts observed in sediment cores. At these contacts, deposits consisting primarily of quartz sand overlie sediments with organic matter that include degraded plant root or stem material. The underlying organic matter likely represents the vegetated portion of the barrier island that was buried by washover fans deposited during hurricanes Irene (2011) and Sandy (2012), as indicated in high-resolution aerial photographs. The GPR data were able to delineate the washover deposits from the underlying stratigraphic unit; however, the radar data did not resolve finer structures necessary to definitively differentiate washover facies from other sand-rich deposits ( e.g., flood-tide deltas and dunes). Other GPR profiles contain reflections that likely correlate to geomorphic features like tidal channels and vegetated zones observed in historical aerial imagery. Burial of these features by overwash fluxes were observed in the aerial imagery and thus the resulting radar sequence is largely interpreted as washover deposits. Deeper, channel-like features that have been infilled were also observed in shore-parallel profiles and these features coincide with scour channels observed in the 1966 aerial photography. Additional sedimentological data are required to determine what role overwash played in the in-filling of these features.

Journal of Environmental & Engineering Geophysics↗