USGS Science⌕ Search

SEARCH · USGS Science

Results for “The Alaska Miner”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources
USGS1992

Map, tables, and summary of fossil and isotopic age data, Mount Hayes Quadrangle, eastern Alaska range, Alaska

This report describes, summarizes, and interprets all known bedrock fossil and isotopic age studies for the Mount Hayes quadrangle, eastern Alaska Range, Alaska. The accompanying map shows the location of all known bedrock fossil and isotopic sample localities in the quadrangle on a generalized geologic base map. These fossil and isotopic age data are obtained from new studies, unpublished data of the U.S. Geological Survey, contributed unpublished data, and published data. This report is one result of a five-year mineral resource assessment of the quadrangle that was done during the summers of 1978 through 1982, with additional topical studiesin 1985 and 1986. This report is one part of a folio on the geological, geochemical, geophysical, and mineral-resource assessment studies of the quadrangle prepared as part of the Alaskan Mineral Resource Assessment Program (AMRAP) of the U.S. Geological Survey.

Alaska↗
USGS2012

Migrated hydrocarbons in exposure of Maastrichtian nonmarine strata near Saddle Mountain, lower Cook Inlet, Alaska

Magoon and others (1980) described an 83-meter- (272-foot-) thick succession of Maastrichtian (Upper Cretaceous) conglomerate, sandstone, mudstone, and coal exposed on the south side of an unnamed drainage, approximately 3 kilometers (1.8 miles) east of Saddle Mountain in lower Cook Inlet (figs. 1 and 2). The initial significance of this exposure was that it was the first reported occurrence of nonmarine rocks of this age in outcrop in lower Cook Inlet, which helped constrain the Late Cretaceous paleogeography of the area and provided important information on the composition of latest Mesozoic sandstones in the basin. The Saddle Mountain section is thought to be an outcrop analog for Upper Cretaceous nonmarine strata penetrated in the OCS Y-0097 #1 (Raven) well, located approximately 40 kilometers (25 miles) to the south–southeast in Federal waters (fig. 1). Atlantic Richfield Company (ARCO) drilled the Raven well in 1980 and encountered oil-stained rocks and moveable liquid hydrocarbons between the depths of 1,760 and 3,700 feet. Completion reports on file with the Bureau of Ocean Energy Management (BOEM; formerly Bureau of Ocean Energy Management, Regulation and Enforcement, and prior to 2010, U.S. Minerals Management Service) either show flow rates of zero or do not mention flow rates. A fluid analysis report on file with BOEM suggests that a wireline tool sampled some oil beneath a 2,010-foot diesel cushion during the fl ow test of the 3,145–3,175 foot interval, but the recorded fl ow rate was still zero (Kirk Sherwood, written commun., January 9, 2012). Further delineation and evaluation of the apparent accumulation was never performed and the well was plugged and abandoned. As part of a 5-year comprehensive evaluation of the geology and petroleum systems of the Cook Inlet forearc basin, the Alaska Division of Geological & Geophysical Surveys obtained a research permit from the National Park Service to access the relatively poorly understood ‘Saddle Mountain exposure’ that is located in the Lake Clark National Park and Preserve. This work was done in cooperation with the Alaska Division of Oil & Gas and U.S. Geological Survey (USGS) research geologists. This report expands on Magoon and others’ (1980) description of the exposure, presents new data on sandstone composition and reservoir quality, presents new geochemical data on petroleum extracted from the outcropping sandstone, and describes oil-bearing correlative strata penetrated by the Raven well. Although the exposure is more than a kilometer (0.6 mile) east of Saddle Mountain (fig. 2), in this report we variously refer to it as the Saddle Mountain succession, Saddle Mountain section, or the rocks at Saddle Mountain underlain by Upper Jurassic strata of the Naknek Formation.

Alaska↗
USGS2011

Soil carbon distribution in Alaska in relation to soil-forming factors

The direction and magnitude of soil organic carbon (SOC) changes in response to climate change remain unclear and depend on the spatial distribution of SOC across landscapes. Uncertainties regarding the fate of SOC are greater in high-latitude systems where data are sparse and the soils are affected by sub-zero temperatures. To address these issues in Alaska, a first-order assessment of data gaps and spatial distributions of SOC was conducted from a recently compiled soil carbon database. Temperature and landform type were the dominant controls on SOC distribution for selected ecoregions. Mean SOC pools (to a depth of 1-m) varied by three, seven and ten-fold across ecoregion, landform, and ecosystem types, respectively. Climate interactions with landform type and SOC were greatest in the uplands. For upland SOC there was a six-fold non-linear increase in SOC with latitude (i.e., temperature) where SOC was lowest in the Intermontane Boreal compared to the Arctic Tundra and Coastal Rainforest. Additionally, in upland systems mineral SOC pools decreased as climate became more continental, suggesting that the lower productivity, higher decomposition rates and fire activity, common in continental climates, interacted to reduce mineral SOC. For lowland systems, in contrast, these interactions and their impacts on SOC were muted or absent making SOC in these environments more comparable across latitudes. Thus, the magnitudes of SOC change across temperature gradients were non-uniform and depended on landform type. Additional factors that appeared to be related to SOC distribution within ecoregions included stand age, aspect, and permafrost presence or absence in black spruce stands. Overall, these results indicate the influence of major interactions between temperature-controlled decomposition and topography on SOC in high-latitude systems. However, there remains a need for more SOC data from wetlands and boreal-region permafrost soils, especially at depths > 1 m in order to fully understand the effects of climate on soil carbon in Alaska.

Geoderma↗
USGS2009

Geochemical data for samples collected in 2008 near the concealed pebble porphyry Cu-Au-Mo deposit, Southwest Alaska

In the summer of 2007, the U.S. Geological Survey (USGS) began an exploration geochemical research study over the Pebble porphyry copper-gold-molybdenum deposit. This report presents the analytical data collected in 2008. The Pebble deposit is world class in size, and is almost entirely concealed by tundra, glacial deposits, and post-Cretaceous volcanic rocks. The Pebble deposit was chosen for this study because it is concealed by surficial cover rocks, is relatively undisturbed (except for exploration company drill holes), is a large mineral system, and is fairly well-constrained at depth by the drill hole geology and geochemistry. The goals of this study are to 1) determine whether the concealed deposit can be detected with surface samples, 2) better understand the processes of metal migration from the deposit to the surface, and 3) test and develop methods for assessing mineral resources in similar concealed terrains. The analytical data are presented as an integrated Microsoft Access 2003 database and as separate Excel files.

Alaska↗
USGS1954

Magnetite deposits at Tuxedni Bay, Alaska

The magnetite deposits on an island in Tuxedni Bay occur in contact-metamorphosed volcanic and sedimentary rocks near their contact with a quartz diorite batholith which underlies large areas of the adjacent Aleutian Range. The deposits are pyrometasomatic in origin and are localized along northeast-trending fractures. The eastern deposit is a low-grade disseminated deposit occurring in hornfels. The western deposit occurs as a massive lens of magnetite and garnet with a marble hanging wall and a hornfels footwall. The tenor of mineral rock in the western deposit may average 75 percent of magnetite. The deposit is lenticular and can be followed along strike for 55 feet in outcrop and, where concealed beneath a cover of soil and vegetation, can be followed for an additional 55 feet with a dip needle. Where exposed in a sea cliff the deposit is 30 to 35 feet thick.

Alaska↗
USGS1981

Gravity anomaly and interpretation map of the Chignik and Sutwik Island quadrangles, Alaska

The gravity field of the Chignik and Sutwik Island quadrangles near the center of the Alaska Peninsula represents a complex series of transitions between probable continental crust on the north, probable oceanic crust on the south, sedimentary basins on each side of the peninsula, and a central structural high and volcanic arc. The resulting gravity field may be generalized as a central southwest- to northeast-trending gravity high bordered on both sides by flanking gravity lows over sedimentary basins underlying the lowlands and continental shelf. All three gravitational features show discontinuities and magnitude variations that reflect the complex geologic setting. Data concerning this complex gravity field have accumulated slowly and intermittently since an initial measurement was made at Port Heiden more than 25 years go (Thiel and others, 1958, 1959). A few reconnaissance measurements by R. V. Allen and an offshore traverse conducted by the U.S. Coast and Geodetic Survey R/V Surveyor were made in the early 1960's (Barnes and others, 1966; Barnes, 1967). At about the same time, Gulf Oil Corp. contracted for a relatively detailed survey of the lowlands on the north shore of the peninsula; the map prepared from this survey is now available (Gulf Oil Corp., Port Moller Development Contract Report, available at U.S. Geological Survey, Anchorage, Alaska). In the early 1970's, a few new land measurements were made by P. L. Dobey, of the Alaska Division of Geological and Geophysical Surveys, and an offshore traverse was completed by the R/V C. Greene on contract to the U.S. Geological Survey (Fisher, 1979, and M. A. Fisher, written commun., 1977). The most recent measurements, the basis for this map, were made by M. E. Yount, D. L. Detra, D. R. Jefferis, and J. E. Case during the mineral assessment of the two quadrangles. D. F. Barnes, R. L. Morin, D. R. Jefferis, and R. F. Sikora have shared in the data compilation. Geologic background for the text was provided by R. L. Detterman, T. P. Miller, E. Young, and F. H. Wilson (1979, 1981).

Alaska↗
USGS2020

Evaluation of the analytical methods used to determine the elemental concentrations found in the stream geochemical dataset compiled for Alaska

A recent U.S. Geological Survey data compilation of stream-sediment geochemistry for Alaska contains decades of analyses collected under numerous Federal and State programs. The compiled data were determined by various analytical methods. Some samples were reanalyzed by a different analytical method than the original, resulting in some elements having concentrations reported by multiple analytical methods. Consideration of the analytical methods used to determine the elemental concentrations is an important step in a mineral prospectivity analysis. We used the compiled data to compare concentrations of barium (Ba), cobalt (Co), copper (Cu), chromium (Cr), nickel (Ni), lead (Pb), and zinc (Zn) determined by different analytical methods to show how simple data comparisons can identify bias and provide a general sense of the comparability of different analytical methods. The elements were selected because they have a range of geochemical properties that may affect the performance of different analytical procedures. Generally, agreement between Ba, Co, Cu, Cr, Ni, Pb, and Zn concentrations is good for most quantitative methods that use a total decomposition of the sample. However, Cr concentrations typically were lower for methods using quantitative-instrumental analysis following a multi-acid dissolution technique that included hydrofluoric acid compared to those using sinter decomposition. Additionally, low- to middle-range concentrations for Co, Cr, Cu, Ni, Pb, and Zn by instrumental neutron activation (NA) and energy-dispersive x-ray spectroscopy (EDX) analyzed by the National Uranium Resource Evaluation (NURE) program have high uncertainty. Concentrations determined by methods that use partial decomposition of the sample generally correspond well to concentrations determined by methods that use a total decomposition technique, except for Ba and Cr. For Ba and Cr, partial decomposition techniques yield lower concentrations than those determined by methods that use a total decomposition technique. Comparison of Ba, Co, Cr, Cu, Ni, Pb, and Zn concentrations determined by semiquantitative visual six-step direct-current arc emission spectrography (ES_SQ) to those determined by quantitative methods using either a total or partial decomposition technique consistently show scatter that exceeds the values expected based on the range represented by the semiquantitative concentration. The data compilation includes a best-value determination that was selected based on the analytical method from the all concentration data for that sample. Ba, Cr, Co, and Zn concentrations determined by NA usually are selected as the best-value determination. However, the NURE-NA method was designed for high throughput and the uncertainty associated with low- and mid-range concentrations is greater than that of the multi-acid method used to reanalyze many samples. Selection of the multi-acid method over the NURE-NA method for Ba, Co, and Zn could be warranted. Additionally, concentrations determined by ES_SQ usually are selected as the best-value determination over all methods that use a partial decomposition of the sample. Substitution of concentrations determined by methods that use a partial decomposition for those of ES_SQ may be warranted for Co, Cu, Ni, Pb, and Zn. Regardless of the selection of the best-value determination, the dataset remains a mixed method dataset and the uncertainty due to differences in analytical methodology must be considered when using the dataset.

Alaska↗
USGS1962

Borates in the United States, exclusive of Alaska and Hawaii

This map shows the location of borate deposits in the United States (exclusive of Alaska and Hawaii). Because all the known borate deposits of the United States of any historic or present economic importance occur in California, western Nevada, and southern Oregon, this map covers only the western part of the country.

Mineral Investigations Resource Map↗
USGS1946

Preliminary report on the stratigraphy and structure of the Kurupa, Colville, and Oolamnagavik Rivers, Alaska

U. S. Geological Survey Party No. 4 covered the area between 68° 30' and 69° 08' N. latitude and between 154° and 155°20' W. longitude during the period May 18 to September 2. Traverses were confined mainly to the valleys of the Kurupa, Colville, and Oolamnagavik Rivers inasmuch as very little rock is exposed in the interstream areas. This report is limited to the Colville River valley area between the Kura and Killik Rivers, and to a stratigraphic section exposed. on the Kurupa 7-12 miles south of the Colville. A final report will be prepared by April 1, 1947, on the total area and will include discussions of the stratigraphy and structure of Upper Cretaceous formations A through D on the Oolamnagavik and Kurupa, the stratigraphy of Formation D on the Colville, and the Lower Cretaceous and Triassic rocks. Separation and identification of heavy minerals from the sandstones and conglomerates, binocular and petrographic microscope examinations of specimens, identification of megafossils, and separation and identification of microfossils, if any, will be undertaken. Detailed examination of all aerial photos will be made to trace out structures and formations in the adjacent areas to the east, north, and west. It seems probable that close correlation between this area, the Killik River area, and Maybe Creek area will be possible by extrapolating field and aerial photo data. It is possible also to trace structures and some formation westward from the Kurupa River.

Alaska↗
USGS2003

Experimental and textural constraints on mafic enclave formation in volcanic rocks

We have used experiments and textural analysis to investigate the process of enclave formation during magma mixing at Southwest Trident volcano, Alaska. Andesite enclaves are present throughout the four dacite lava flows produced by the eruption, and resemble mafic enclaves commonly found in other volcanic rocks. Our experiments replicate the pressure–temperature–time path taken by enclave-forming andesite magma as it is engulfed in dacite during magma mixing. Pressure and temperature information for the andesite and dacite are from [Coombs et al., Contrib. Mineral. Petrol. 140 (2000) 99–118]. The andesite was annealed at 1000°C, and then cooled to 890°C at rates of 110°C h −1 , 10°C h −1 , and 2°C h −1 . Once cooled to 890°C, andesite was held at this lower temperature from times ranging from 1 to 40 h. The andesite that was cooled at the slower rates of 2°C h −1 and 10°C h −1 most resembles enclave groundmass texturally and compositionally. Based on simple thermal calculations, these rates are more consistent with cooling of the andesite groundmass below an andesite–dacite interface than with cooling of enclave-sized spheres. If enclaves do crystallize as spheres, post-crystallization disaggregation must occur. Calculations using the MELTS algorithm [Ghiorso and Sack, Contrib. Mineral. Petrol. 119 (1995) 197–212] show that for incoming andesite to become less dense than the dacite ∼34 volume % of its groundmass must crystallize to undergo ∼18 volume % vesiculation; these values are similar to those determined for Southwest Trident enclaves. Thus such crystallization may lead to ‘flotation’ of enclaves and be a viable mechanism for enclave formation and dispersal. The residual melt in the cooling experiments did not evolve to rhyolitic compositions such as seen in natural enclaves due to a lack of a decompression step in the experiments. Decompression experiments on Southwest Trident dacite suggest an average ascent rate for the eruption of ∼2–3 MPa h −1 . An andesite experiment that was cooled and then decompressed at this rate contains melt that matches that of the natural enclaves. It is apparent that decompression (ascent)-induced crystallization occurs in enclaves, but not in the form of microlites as happens in the dacite host, due either to insufficient residence time at chamber temperatures or to the pre-existing microphenocrysts which act as sites for new growth.

Alaska↗
USGS1998

Tectonic setting of synorogenic gold deposits of the Pacific Rim

More than 420 million oz of gold were concentrated in circum-Pacific synorogenic quartz loades mainly during two periods of continental growth, one along the Gondwanan margin in the Palaeozoic and the other in the northern Pacific basin between 170 and 50 Ma. These ores have many features in common and can be grouped into a single type of lode gold deposit widespread throughout clastic sedimentary-rock dominant terranes. The auriferous veins contain only a few percent sulphide minerals, have gold:silver ratios typically greater than 1:1, show a distinct association with medium grade metamorphic rocks, and may be associated with large-scale fault zone. Ore fluids are consistently of low salinity and are CO2-rich. In the early and middle Palaeozoic in the southern Pacific basin, a single immense turbidite sequence was added to the eastern margin of Gondwanaland. Deformation of these rocks in southeastern Australia was accompanied by deposition of at least 80 million oz of gold in the Victorian sector of the Lachlan fold belt mainly during the Middle and Late Devonian. Lesser Devonian gold accumulations characterized the more northerly parts of the Gondwanan margin within the Hodgkinson-Broken River and Thomson fold belts. Additional lodes were emplaced in this flyschoid sequence in Devonian or earlier Palaeozoic times in what is now the Buller Terrane, Westland, New Zealand. Minor post-Devonian growth of Gondwanaland included terrane collision and formation of gold-bearing veins in the Permian in Australia's New England fold belt and in the Jurassic-Early Cretaceous in New Zealand's Otago schists. Collision and accretion of dozens of terranes for a 100-m.y.-long period against the western margin of North America and eastern margin of Eurasia led to widespread, lattest Jurassic to Eocene gold veining in the northern Pacific basin. In the former location, Late Jurassic and Early Cretaceous veins and related placer deposits along the western margin of the Sierra Nevada batholith have yielded more than 100 million oz of gold. Additional significant ore-forming events during the development of North America's Cordilleran orogen included those in the Klamath Mountains region, California in the Late Jurassic and Early Cretaceous; the Klondike district, Yukon by the Early Cretaceous; the Nome and Fairbanks districts, Alaska, and the Bridge River district, British Columbia in the middle Cretaceous; and the Juneau gold belt, Alaska in the Eocene. Gold-bearing veins deposited during the Late Jurassic and Early Cretaceous terrane collision that formed the present-day Russian Far East have been the source for more than 130 million oz of placer gold. The abundance of gold-bearing quartz-carbonate veins throughout the Gondwanan, North American and Eurasian continental margins suggests the migration and concentration of large fluid volumes during continental growth. Such volumes could be released during orogenic heating of hydrous silicate mineral phases within accreted marine strata. The common temporal association between gold veining and magmatism around the Pacific Rim reflects these thermal episodes. Melting of the lower thickened crust during arc formation, slab rollback and extensional tectonism, and subduction of a slab window beneath the seaward part of the forearc region can all provide the required heat for initation of the ore-forming processes.

Ore Geology Reviews↗
USGS2021

Linear deconvolution applied to ASTER imagery of terrestrial dune analog sites

Advanced Spaceborne Thermal Emission and Reflec-tion (ASTER) radiometer onboard NASA’s Terra satellite has nearly complete global coverage in the 8 – 14 µm thermal infrared (TIR) atmospheric window and is the highest resolution sensor providing TIR emissivity data at 90-m spatial resolution and five multispectral bands. ASTER imagery enables mapping of spatial variations in the distribution of mineral abundances across terrestrial dune fields. We compared simulated ASTER emissivity spectra derived from higher resolution laboratory measurements, with those simulated for various higher and lower resolution multispectral and hyperspectral sensors. Linear deconvolution was then applied to simulated ASTER as well as seven other convoluted laboratory spectral measurements of eight samples that we collected from seven different dune fields throughout the Western United States and Alaska: (1) Algodones, CA; (2) Big Dune, NV; (3) Bruneau, ID; (4) Great Kobuk Sand Dunes (GKSD), AK; (5) Great Sand Dunes National Park and Preserve (GSDNPP), CO; (6) Sunset Crater, AZ; and (7) White Sands National Monument, NM. We evaluate the utility of each of these seven dune fields as potential Martian aeolian analog sites by comparing their compositional similarities and differ-ences between morphologically similar dune land-forms found on Mars.

Conference Paper↗
USGS2013

Tectonic setting of the pebble and other copper-gold-molybdenum porphyry deposits within the evolving middle cretaceous continental margin of Northwestern North America

The Pebble Cu-Au-Mo deposit in southwestern Alaska, containing the largest gold resource of any known porphyry in the world, developed in a tectonic setting significantly different from that of the present-day. It is one of a series of metalliferous middle Cretaceous porphyritic granodiorite, quartz monzonite, and diorite bodies, evolved from lower crust and metasomatized lithospheric mantle melts, which formed along much of the length of the North American craton suture with the Peninsular-Alexander-Wrangellia arc. The porphyry deposits were emplaced within the northernmost two of a series of ca. 130 to 80 Ma flysch basins that define the suture, as well as into arc rocks immediately seaward of the two basins. Deposits include the ca. 100 to 90 Ma Pebble, Neacola, and other porphyry prospects along the Kahiltna basin-Peninsula terrane boundary, and the ca. 115 to 105 Ma Baultoff, Carl Creek, Horsfeld, Orange Hill, Bond Creek, and Chisna porphyries along the Nutzotin basin-Wrangellia terrane boundary. The porphyry deposits probably formed along the craton margin more than 1,000 km to the south of their present latitude. Palinspastic reconstructions of plate kinematics from this period are particularly difficult because magmatism overlaps the 119 to 83 Ma Cretaceous Normal Superchron, a period when sea-floor magnetic data are lacking. Our favored scenario is that ore formation broadly overlaps the cessation of sedimentation and contraction and the transition to a transpressional continental margin regime, such that the remnant ocean basins were converted to strike-slip basins. The basins and outboard Peninsular-Alexander-Wrangellia composite superterrane, which are all located seaward of the deep crustal Denali-Farewell fault system, were subjected to northerly dextral transpression for as long as perhaps 50 m.y., beginning at ca. 95 ± 10 Ma. The onset of this transpression was marked by development of the mineralized bodies along fault segments on the seaward side of the basins. Geochemical and radiogenic isotopic data for igneous rocks associated with the Pebble porphyry deposit suggest continuous melt derivation from enriched lithosphere of a recently metasomatized mantle. These geochemical characteristics, coupled with the arc-continent-related collisional setting, suggest that lithospheric thickening and postcollisional lithospheric melting are the most likely cause of the ore-related magmatism. Subsequent to translation of the Alaskan margin terranes and early Tertiary oroclinal bending of Alaska, the northernmost Kahiltna basin and the Pebble deposit, as well as the other porphyry systems, reached their present-day locations along southern Alaska.

Alaska, Yukon↗
USGS1982

Alaska index (December 1980 - November 1981)

In an effort to develop the oil and gas resources of the Outer Continental Shelf (OCS), the United States currently conducts a leasing program for these resources. The Secretary of the Department of the Interior (DOI) has been designated by the Outer Continental Shelf Lands Act of 1953 (43 U.S.C. 1331-1343), as amended by the Outer Continental Shelf Lands Act Amendments of 1978 (43 U.S.C. 1801-1866), to manage and regulate many of the activities that relate to the leasing, exploration, development, and production of the OCS mineral resources. Many of the Secretary's responsibilities have been delegated to the Bureau of Land Management (BLM) and the Minerals Management Service (MMS). Responsibilities of the Minerals Management Service were formerly delegated to the Conservation Division of the U.S. Geological Survey (USGS).

Alaska↗
USGS2007

USGS national surveys and analysis projects: Preliminary compilation of integrated geological datasets for the United States: A section in Digital mapping techniques '06 - Workshop proceedings

The growth in the use of Geographic Information Systems (GIS) has highlighted the need for regional and national digital geologic maps attributed with age and rock type information. Such spatial data can be conveniently used to generate derivative maps for purposes that include mineral-resource assessment, metallogenic studies, tectonic studies, human health and environmental research. In 1997, the United States Geological Survey’s Mineral Resources Program initiated an effort to develop national digital databases for use in mineral resource and environmental assessments. One primary activity of this effort was to compile a national digital geologic map database, utilizing state geologic maps, to support mineral resource studies in the range of 1:250,000- to 1:1,000,000-scale. Over the course of the past decade, state databases were prepared using a common standard for the database structure, fields, attributes, and data dictionaries. As of late 2006, standardized geological map databases for all conterminous (CONUS) states have been available on-line as USGS Open-File Reports. For Alaska and Hawaii, new state maps are being prepared, and the preliminary work for Alaska is being released as a series of 1:500,000-scale regional compilations. See below for a list of all published databases.

Open-File Report↗
USGS1962

Mercury in the United States, exclusive of Alaska and Hawaii

This map shows the location of mercury districts and deposits in the United States (exclusive of Alaska and Hawaii). The map was compiled from published reports and from data in the files of the Geological Survey. All map locations are numbered consecutively in each state and names, geographic coordinates, and selected references are given in the Index.

Mineral Investigations Resource Map↗
USGS2008

Substrate Geochemistry and Soil Development in Boreal Forest and Tundra Ecosystems in the Yukon-Tanana Upland and Seward Peninsula, Alaska

We report on soil development as a function of bedrock type and the presence of loess in two high latitude ecosystems (boreal forest and tundra) and from two regions in Alaska?the Yukon-Tanana Upland (YTU, east-central Alaska) and the Seward Peninsula (SP, far-west coastal Alaska). This approach to the study of 'cold soils' is fundamental to the quantification of regional geochemical landscape patterns. Of the five state factors in this study, bedrock and biota (ecosystem; vegetation zone) vary whereas climate (within each area) and topography are controlled. The influence of time is assumed to be controlled, as these soils are thousands of years old (late Quaternary to Holocene). The primary minerals in soils from YTU, developed over loess and crystalline bedrock (metamorphic and intrusive), are quartz, plagioclase, and 2:1 clays; whereas in the SP, where loess and metasedimentary bedrock (schist and quartzite) predominate, they are quartz and muscovite. The A horizon of both regions is rich in peat. Examination of the ratio of mobile (K2O, CaO, and Fe2O3) to immobile (TiO2) major oxides, within each region, shows that very little difference exists in the chemical weathering of soils developed between the two ecosystems examined. Differences were observed between tundra soils developed in the two regions. These differences are most probably due to the dissimilarity in the geochemical importance of both loess and bedrock. A minimal loss of cadmium with soil depth is seen for soils developed over YTU crystalline bedrock in the boreal forest environments. This trend is related to the mobility of cadmium in these soils as well as to its biogenic cycling. Major differences were observed in the proportion of cadmium and zinc among the A, B, and C horizon material sequestered in various soil fractions as measured by sequential soil extractions. These trends followed such variables as the decrease with depth in organic matter, the change in clay minerals, and the change in the proportion of oxides/hydroxides. An analysis of the bulk soil mineralogy and the relation between CaO and MgO and Al2O3 and Fe2O3 indicates that the silty textured soils of the YTU are predominantly eolian (that is, of late Tertiary or Quaternary age) but not broad-regional in origin. Their composition instead is probably the result of locally derived dusts as well as input from long-term, in-place bedrock weathering.

Scientific Investigations Report↗
USGS2007

USGS national surveys and analysis projects: Preliminary compilation of integrated geological datasets for the United States

The growth in the use of Geographic nformation Systems (GS) has highlighted the need for regional and national digital geologic maps attributed with age and rock type information. Such spatial data can be conveniently used to generate derivative maps for purposes that include mineral-resource assessment, metallogenic studies, tectonic studies, human health and environmental research. n 1997, the United States Geological Survey’s Mineral Resources Program initiated an effort to develop national digital databases for use in mineral resource and environmental assessments. One primary activity of this effort was to compile a national digital geologic map database, utilizing state geologic maps, to support mineral resource studies in the range of 1:250,000- to 1:1,000,000-scale. Over the course of the past decade, state databases were prepared using a common standard for the database structure, fields, attributes, and data dictionaries. As of late 2006, standardized geological map databases for all conterminous (CONUS) states have been available on-line as USGS Open-File Reports. For Alaska and Hawaii, new state maps are being prepared, and the preliminary work for Alaska is being released as a series of 1:500,000-scale regional compilations. See below for a list of all published databases.

Conference Paper↗