USGS Science⌕ Search

SEARCH · USGS Science

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources

Luminescence as a sediment tracer and provenance tool

Luminescence holds unique potential as a sediment tracer and provenance method. The tracer application of luminescence has key advantages including ease of measurement, relatively low cost, and applicability to geologically ubiquitous quartz and feldspar sand and silt. These advantages can help answer fundamental questions about geomorphology, sediment transport, sediment production, and the tectonic/climatic controls on source‐to‐sink sedimentary systems. There is a notable body of research on luminescence as a sediment tracer. These tracer methods range from identifying source locations based on unique luminescence characteristics, to observing changes in luminescence characteristics with transport, to using residual luminescence to infer rates of transport. Previous applications of luminescence include provenance and quantification of fluvial transport rate, tracing of coastal longshore drift, estimations of mixing rates in soil or sediment, and provenance of wind‐blown deposits. The few studies that compare luminescence methods with nonluminescence tracer methods show good agreement. However, more work is needed to test the application of luminescence tracers in sediments. Future research directions should focus on comparing luminescence‐based with nonluminescence tracer methods. Furthermore, research is needed on the effects of specific geomorphic processes on luminescence characteristics and residual doses. While there is significant potential for future research, luminescence is already a useful sediment tracer and provenance tool applicable to a wide range of geomorphic environments.

Reviews of Geophysics↗

Site response for Seattle and source parameters of earthquakes in the Puget Sound Region

We analyzed seismograms from 21 earthquakes ( M L 2.0-4.9) recorded by digital seismographs we deployed in urban Seattle to determine site response and earthquake stress drops. The seismometers were situated on a wide variety of geologic units, including artificial fill (e.g., Kingdome, Harbor Island), Pleistocene age soils (glacial till and outwash deposits of Seattle's hills), modified land (downtown Seattle, Space Needle), and Tertiary sedimentary rock. Two mainshock-aftershock sequences were recorded: the June 1997 Bremerton sequence (mainshock M L 4.9) and the February 1997 South Seattle sequence (mainshock M L 3.5), along with other events in the Puget Sound region. We developed a new inversion procedure to estimate site response, source corner frequencies, and seismic moments from the S -wave spectra. This inversion uses corner frequencies determined from spectral ratios of mainshock-aftershock pairs as constraints. The site responses found from the inversion are not relative to the rock site but are relative to an idealized site with a flat frequency response. The response of the rock site is also found from the inversion. The inversion results show high response for the sites on artificial fill, more moderate amplification for most sites on stiff Pleistocene soils or modified land, and low response for the rock site. Some sites display resonances, such as a strong 2-Hz resonance at our site near the Kingdome, which is caused by the surficial layers of fill and younger alluvium. The sites in West Seattle exhibit high amplification, even though they are on relatively stiff soils of glacial outwash. This may be partly caused by basin surface waves produced by conversion of incident S waves. This high response in West Seattle is consistent with damage reports from the 1949 ( m b 7.1) and 1965 ( m b 6.5) earthquakes. Stress-drop estimates for the events we recorded were generally low, between 0.4 and 25 bars, although some of the events may have had higher stress drops that could not be resolved because of the limited passband. We calculated a stress drop of 24 bars for the Bremerton mainshock and 10 bars for the South Seattle mainshock.

Washington↗

Gravity survey and interpretation of Fort Irwin and vicinity, Mojave Desert, California

In support of a hydrogeologic study of the groundwater resources on Fort Irwin, we have combined new gravity data with preexisting measurements to produce an isostatic residual gravity map, which we then separated into two components reflecting (1) the density distribution in the pre-Cenozoic basement complex and (2) the distribution of low-density Cenozoic volcanic and sedimentary deposits that lie on top of the basement complex. The second component was inverted to estimate the three-dimensional distribution of Cenozoic deposits by using constraints from geology, drillholes, and time-domain electromagnetic soundings. In most of the base, the Cenozoic deposits are no more than 300 m thick, except in the basins with more than 500 m of fill beneath Coyote Lake, Red Pass Lake, west of Nelson Lake, west of Superior Lake, Bicycle Lake, and in the vicinity of Nelson Lake.

California↗

Report on workshop to incorporate basin response in the design of tall buildings in the Puget Sound region, Washington

On March 4, 2013, the City of Seattle and the U.S. Geological Survey (USGS) convened a workshop of 25 engineers and seismologists to provide recommendations to the City for the incorporation of amplification of earthquake ground shaking by the Seattle sedimentary basin in the design of tall buildings in Seattle. The workshop was initiated and organized by Susan Chang, a geotechnical engineer with the City of Seattle Department of Planning and Development, along with Art Frankel and Craig Weaver of the USGS. C.B. Crouse of URS Corporation, Seattle made key suggestions for the agenda. The USGS provided travel support for most of the out-of-town participants. The agenda and invited attendees are given in the appendix. The attendees included geotechnical and structural engineers working in Seattle, engineers with experience utilizing basin response factors in other regions, and seismologists who have studied basin response in a variety of locations. In this report, we summarize the technical presentations and the recommendations from the workshop.

Washington↗

Ore controls at the Mahd adh Dhahab gold mine, Kingdom of Saudi Arabia

Mahd adh Dhahab is the largest of numerous ancient gold mines scattered through the Precambrian shield of Saudi Arabia and the only one with recent production. Free gold and silver, tellurides, pyrite, galena, sphalerite, and chalcopyrite are in and associated with quartz veins and quartz veinlet stockworks. Country rocks consist of a sequence of pyroclastic and transported pyroclastic rocks of the Halaban Group that are locally highly silicified and potassium-feldspathized. Two known ore zones occur in a north-trending zone of quartz veins and breccias, faults, alteration, and metallization approximately 400 m wide and 1,000 m long. The ancient and recent workings are located in the northern part of this zone, and a significant new discovery, the southern mineralized zone, is in the southern part. A potential resource of 1.1 million tons of 27 g/t Au and 73 g/t Ag ore is contained in the southern mineralized zone. Geologic setting of ore bodies is similar in both zones. Significant mineralization occurs only within altered and fractured agglomerate directly beneath a cap of fine-grained tuff and sedimentary rock where the layered rocks are cut by metalliferous quartz veins. Ore was localized by four interacting controls; depth, an impervious cap, metalliferous quartz veins and a receptive host rock.

Open-File Report↗

Geology of Mount Rainier National Park, Washington

Mount Rainier National Park includes 378 square miles of rugged terrain on the west slope of the Cascade Mountains in central Washington. Its mast imposing topographic and geologic feature is glacier-clad Mount Rainier. This volcano, composed chiefly of flows of pyroxene andesite, was built upon alt earlier mountainous surface, carved from altered volcanic and sedimentary rocks invaded by plutonic and hypabyssal igneous rocks of great complexity. The oldest rocks in the park area are those that make up the Olmnapecosh Formation of late Eocene age. This formation is more than 10,000 feet thick, and consists almost entirely of volcanic debris. It includes some lensoid accumulations of lava and coarse mudflows, heaped around volcanic centers., but these are surrounded by vastly greater volumes of volcanic clastic rocks, in which beds of unstratified coarse tuff-breccia, about 30 feet in average thickness, alternate with thin-bedded breccias, sandstones, and siltstones composed entirely of volcanic debris. The coarser tuff-breccias were probably deposited from subaqueous volcanic mudflows generated when eruption clouds were discharged directly into water, or when subaerial ash flows and mudflows entered bodies of water. The less mobile mudflows and viscous lavas built islands surrounded by this sea of thinner bedded water-laid clastics. In compostion the lava flows and coarse lava fragments of the Ohanapecosh Formation are mostly andesite, but they include less abundant dacite, basalt, and rhyolite. The Ohanapecosh Formation was folded, regionally altered to minerals characteristic of the zeolite facies of metamorphism, uplifted, and deeply eroded before the overlying Stevens Ridge Formation of Oligocene or early Miocene age was deposited upon it. The Stevens Ridge rocks, which are about 3,000 feet in maximum total thickness, consist mainly of massive ash flows. These are now devitrified and altered, but they originally consisted of rhyodacite pumice lapilli and glass shards, which compacted and welded into thick massive units during emplacement and cooling. Subordinate water-laid clastic rocks occur t(ward the top of the formation, and thin-bedded pyroclastic layers occur between some of the ash flows. Exposures on Backbone Ridge and on Carbon River below the mouth of Cataract Creek show that in places the thick basal Stevens Ridge ash flows swept with great violence over an old erosion surface developed on rocks of the Ohanapecosh Formation. Masses of mud, tree trunks, and other surface debris were swirled upward into the base of the lowermost ash fiery, and lobes and tongues of hot ash were forced downward into. the saprolitic mud. The Stevens Ridge Formation is concordantly overlain by the Fifes Peak Formation of probable early Miocene age, which consists of lava flows, subordinate mudflows, and minor quantities of tuffaceous clastic rocks. The lavas are predominantly olivine basalt and basaltic andesite, but they include a little rhyolite. They are slightly to moderately altered: the ferromagnesian phenocrysts are generally replaced by saponite, chiprite, or carbonate ; the glass is devitrified ; and the rocks are locally permeated by veinlets of zeolite. Swarms of diabase sills and dikes are probably intrusive equivalents of the Fifes Peak lavas. The upper part of the Fifes Peak Formation has been mostly eroded from Mount Rainier National Park, but farther north, in the Cedar Lake quadrangle, it attains a thickness of more than 5,000 feet. The Fifes Peak and earlier formations were gently folded, faulted, uplifted, and eroded before the. late Miocene Tatoosh pluton worked its way upward to shallow depths and eventually broke through to the surface. The rise of the pluton was accompanied by .the injection of a complicated melange of satellitic stocks, sills, and dikes. A favored horizon for intrusion of sills was along or near the unconfo

Professional Paper↗

Evaluation of geohydrologic framework, recharge estimates and ground-water flow of the Joshua Tree area, San Bernardino County, California

Ground water historically has been the sole source of water supply for the community of Joshua Tree in the Joshua Tree ground-water subbasin of the Morongo ground-water basin in the southern Mojave Desert. The Joshua Basin Water District (JBWD) supplies water to the community from the underlying Joshua Tree ground-water subbasin. The JBWD is concerned with the long-term sustainability of the underlying aquifer. To help meet future demands, the JBWD plans to construct production wells in the adjacent Copper Mountain ground-water subbasin. As growth continues in the desert, there may be a need to import water to supplement the available ground-water resources. In order to manage the ground-water resources and to identify future mitigating measures, a thorough understanding of the ground-water system is needed. The purpose of this study was threefold: (1) improve the understanding of the geohydrologic framework of the Joshua Tree and Copper Mountain ground-water subbasins, (2) determine the distribution and quantity of recharge using field and numerical techniques, and (3) develop a ground-water flow model that can be used to help manage the water resources of the region. The geohydrologic framework was refined by collecting and interpreting water-level and water-quality data, geologic and electric logs, and gravity data. The water-bearing deposits in the Joshua Tree and Copper Mountain ground-water subbasins are Quarternary alluvial deposits and Tertiary sedimentary and volcanic deposits. The Quarternary alluvial deposits were divided into two aquifers (referred to as the 'upper' and the 'middle' alluvial aquifers), which are about 600 feet (ft) thick, and the Tertiary sedimentary and volcanic deposits were assigned to a single aquifer (referred to as the 'lower' aquifer), which is as thick as 1,500 ft. The ground-water quality of the Joshua Tree and Copper Mountain ground-water subbasins was defined by collecting 53 ground-water samples from 15 wells (10 in the Joshua Tree ground-water subbasin and 5 in the Copper Mountain ground-water subbasin) between 1980 and 2002 and analyzing the samples for major ions, nutrients, and selected trace elements. Selected samples also were analyzed for oxygen-18, deuterium, tritium, and carbon-14. The water-quality data indicated that dissolved solids and nitrate concentrations were below regulatory limits for potable water; however, fluoride concentrations in the lower aquifer exceeded regulatory limits. Arsenic concentrations and chromium concentrations were generally below regulatory limits; however, arsenic concentrations measured in water from wells perforated in the lower aquifer exceeded regulatory limits. The carbon-14 activities ranged from 2 to 72 percent modern carbon and are consistent with uncorrected ground-water ages (time since recharge) of about 32,300 to 2,700 years before present. The oxygen-18 and deuterium composition of water sampled from the upper aquifer is similar to the volume-weighted composition of present-day winter precipitation indicating that winter precipitation was the predominant source of ground-water recharge. Field studies, conducted during water years 2001 through 2003 to determine the distribution and quantity of recharge, included installation of instrumented boreholes in selected washes and at a nearby control site. Core material and cuttings from the boreholes were analyzed for physical, chemical, and hydraulic properties. Instruments installed in the boreholes were monitored to measure changes in matric potential and temperature. Borehole data were supplemented with temperature data collected from access tubes installed at additional sites along study washes. Streambed hydraulic properties and the response of instruments to infiltration were measured using infiltrometers. Physical and geochemical data collected away from the stream channels show that direct infiltration of precipitation to depths below the root zone and subsequent gro

Scientific Investigations Report↗

Simulation of ground-water flow to assess geohydrologic factors and their effect on source-water areas for bedrock wells in Connecticut

Generic ground-water-flow simulation models show that geohydrologic factors?fracture types, fracture geometry, and surficial materials?affect the size, shape, and location of source-water areas for bedrock wells. In this study, conducted by the U.S. Geological Survey in cooperation with the Connecticut Department of Public Health, ground-water flow was simulated to bedrock wells in three settings?on hilltops and hillsides with no surficial aquifer, in a narrow valley with a surficial aquifer, and in a broad valley with a surficial aquifer?to show how different combinations of geohydrologic factors in different topographic settings affect the dimensions and locations of source-water areas in Connecticut. Three principal types of fractures are present in bedrock in Connecticut?(1) Layer-parallel fractures, which developed as partings along bedding in sedimentary rock and compositional layering or foliation in metamorphic rock (dips of these fractures can be gentle or steep); (2) unroofing joints, which developed as strain-release fractures parallel to the land surface as overlying rock was removed by erosion through geologic time; and (3) cross fractures and joints, which developed as a result of tectonically generated stresses that produced typically near-vertical or steeply dipping fractures. Fracture geometry is defined primarily by the presence or absence of layering in the rock unit, and, if layered, by the angle of dip in the layering. Where layered rocks dip steeply, layer-parallel fracturing generally is dominant; unroofing joints also are typically well developed. Where layered rocks dip gently, layer-parallel fracturing also is dominant, and connections among these fractures are provided only by the cross fractures. In gently dipping rocks, unroofing joints generally do not form as a separate fracture set; instead, strain release from unroofing has occurred along gently dipping layer-parallel fractures, enhancing their aperture. In nonlayered and variably layered rocks, layer-parallel fracturing is absent or poorly developed; fracturing is dominated by well-developed subhorizontal unroofing joints and steeply dipping, tectonically generated fractures and (or) cooling joints. Cross fractures (or cooling joints) in nonlayered and variably layered rocks have more random orientations than in layered rocks. Overall, nonlayered or variably layered rocks do not have a strongly developed fracture direction. Generic ground-water-flow simulation models showed that fracture geometry and other geohydrologic factors affect the dimensions and locations of source-water areas for bedrock wells. In general, source-water areas to wells reflect the direction of ground-water flow, which mimics the land-surface topography. Source-water areas to wells in a hilltop setting were not affected greatly by simulated fracture zones, except for an extensive vertical fracture zone. Source-water areas to wells in a hillside setting were not affected greatly by simulated fracture zones, except for the combination of a subhorizontal fracture zone and low bedrock vertical hydraulic conductivity, as might be the case where an extensive subhorizontal fracture zone is not connected or is poorly connected to the surface through vertical fractures. Source-water areas to wells in a narrow valley setting reflect complex ground-water-flow paths. The typical flow path originates in the uplands and passes through either till or bedrock into the surficial aquifer, although only a small area of the surficial aquifer actually contributes water to the well. Source-water areas in uplands can include substantial areas on both sides of a river. Source-water areas for wells in this setting are affected mainly by the rate of ground-water recharge and by the degree of anisotropy. Source-water areas to wells in a broad valley setting (bedrock with a low angle of dip) are affected greatly by fracture properties. The effect of a given fracture is to channel the

Scientific Investigations Report↗

Geologic map and map database of the Spreckels 7.5-minute Quadrangle, Monterey County, California

Introduction The Spreckels quadrangle lies at the north end of the Sierra de Salinas and extends from the Salinas Valley on the northeast across Los Laurelles Ridge south to Carmel Valley, an intermontane valley that separates the Santa Lucia Range from the Sierra de Salinas (fig. 1). The Toro Regional Park occupies the east-central part of the quadrangle, whereas the former Fort Ord Military Reservation covers the northwestern part of the area and is the probable locus of future development. Subdivisions largely occupy the older floodplain of Toro Creek and the adjacent foothills, with less dense development along the narrower canyons of Corral de Tierra and San Benancio Gulch to the south. The foothills southwest of the Salinas River are the site of active residential development. Geologically, the study area has a crystalline basement of Upper Cretaceous granitic rocks of the Salinian block and older metasedimentary rocks of the schist of the Sierra de Salinas of probable Cretaceous age. Resting nonconformably upon these basement rocks is a sedimentary section that ranges in age from middle Miocene to Holocene and has a composite thickness of as much as 1,200 m. One of the purposes of the present study was to investigate the apparent lateral variation of the middle to upper Miocene sections from the typical porcelaneous and diatomaceous Monterey Formation of the Monterey and Seaside quadrangles to the west (Clark and others, 1997) to a thick marine sandstone section in the eastern part of the Spreckels quadrangle. Liquefaction, which seriously affected the Spreckels area in the 1906 San Francisco earthquake (Lawson, 1908), and landsliding are the two major geological hazards of the area. The landslides consist mainly of older large slides in the southern and younger debris flows in the northern part of the quadrangle. This digital map database, compiled from previously published and unpublished data, and new mapping by the authors, represents the general distribution of bedrock and surficial deposits in the mapped area. Together with the accompanying text file (skmf.txt, skmf.pdf, or skmf.ps), it provides current information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The scale of the source maps limits the spatial resolution (scale) of the database to 1:24,000 or smaller.

Miscellaneous Field Studies Map↗

Martian mud volcanism: Terrestrial analogs and implications for formational scenarios

The geology of Mars and the stratigraphic characteristics of its uppermost crust (mega-regolith) suggest that some of the pervasively-occurring pitted cones, mounds, and flows may have formed through processes akin to terrestrial mud volcanism. A comparison of terrestrial mud volcanism suggests that equivalent Martian processes likely required discrete sedimentary depocenters, volatile-enriched strata, buried rheological instabilities, and a mechanism of destabilization to initiate subsurface flow. We outline five formational scenarios whereby Martian mud volcanism might have occurred: (A) rapid deposition of sediments, (B) volcano-induced destabilization, (C) tectonic shortening, (D) long-term, load-induced subsidence, and (E) seismic shaking. We describe locations within and around the Martian northern plains that broadly fit the geological context of these scenarios and which contain mud volcano-like landforms. We compare terrestrial and Martian satellite images and examine the geological settings of mud volcano provinces on Earth in order to describe potential target areas for piercement structures on Mars. Our comparisons help to evaluate not only the role of water as a functional component of geological processes on Mars but also how Martian mud volcanoes could provide samples of otherwise inaccessible strata, some of which could contain astrobiological evidence.

Marine and Petroleum Geology↗

Arsenic in New Jersey Coastal Plain streams, sediments, and shallow groundwater: effects from different geologic sources and anthropogenic inputs on biogeochemical and physical mobilization processes

Arsenic (As) concentrations in New Jersey Coastal Plain streams generally exceed the State Surface Water Quality Standard (0.017 micrograms per liter (&micro;g/L)), but concentrations seldom exceed 1 &micro;g/L in filtered stream-water samples, regardless of geologic contributions or anthropogenic inputs. Nevertheless, As concentrations in unfiltered stream water indicate substantial variation because of particle inputs from soils and sediments with differing As contents, and because of discharges from groundwater of widely varying chemistry. In the Inner Coastal Plain, streams draining to lower reaches of the Delaware River traverse As-rich glauconitic sediments of marine origin in which As contents typically are about 20 milligrams per kilogram (mg/kg) or greater. In some of these sedimentary units, As concentrations exceed the New Jersey drinking-water maximum contaminant level (5 &micro;g/L) in shallow groundwater that discharges to streams. Microbes, fueled by organic carbon beneath the streambed, reduce iron (Fe) and As, releasing As and Fe into solution in the shallow groundwater from geologic materials that likely include (in addition to glauconite) other phyllosilicates, apatite, and siderite. When the groundwater discharges to the stream, the dissolved Fe and As are oxidized, the Fe precipitates as a hydroxide, and the As sorbs or co-precipitates with the Fe. Because of the oxidation/precipitation process, dissolved As concentrations measured in filtered stream waters of the Inner Coastal Plain are about 1 &micro;g/L, but the total As concentrations (and loads) are greater, substantially amplified by As-bearing suspended sediment in stormflows. In the Outer Coastal Plain, streams draining to the Atlantic Ocean traverse quartz-rich sediments of mainly deltaic origin where the As content generally is low (<8 mg/kg). In unfiltered and filtered water samples, As concentrations typically are less than 1 &micro;g/L in the acidic stream water and groundwater of the Outer Coastal Plain, but are greater in waters from urban areas. Despite the generally small geologic contributions to Outer Coastal Plain groundwater, where wastewater inputs were indicated, concentrations of As in unfiltered shallow groundwater discharging to small urban streams exceeded the maximum contaminant level. With a history of agriculture in the New Jersey Coastal Plain, anthropogenic inputs of As, such as residues from former pesticide applications in soils, can amplify any geogenic As in runoff. Such inputs contribute to an increased total As load to a stream at high stages of flow. As a result of yet another anthropogenic influence, microbes that reduce and mobilize As beneath the streambeds are stimulated by inputs of dissolved organic carbon (DOC). Although DOC is naturally occurring, anthropogenic contributions from wastewater inputs may deliver increased levels of DOC to subsurface soils and ultimately groundwater. Arsenic concentrations may increase with the increases in pH of groundwater and stream water in developed areas receiving wastewater inputs, as As mobilization caused by pH-controlled sorption and desorption reactions are likely to occur in waters of neutral or alkaline pH (for example, Nimick and others, 1998; Barringer and others, 2007b). Because of the difference in As content of the geologic materials in the two sub-provinces of the Coastal Plain, the amount of As that is mobile in groundwater and stream water is, potentially, substantially greater in the Inner Coastal Plain than in the Outer Coastal Plain. In turn, streams within the Inner and Outer Coastal Plain can receive substantially more As in groundwater discharge from developed areas than from environments where DOC appears to be of natural origin.

New Jersey↗

Scanning electron microscopic evaluation of broad ion beam milling effects to sedimentary organic matter: Sputter-induced artifacts or naturally occurring porosity?

Research examining organic-matter hosted porosity has significantly increased during the last decade due to greater focus on understanding hydrocarbon migration and storage in source-rock reservoirs, and technological advances in scanning electron microscopy (SEM) capabilities. The examination of nanometer-scale organic-matter hosted porosity by SEM requires the preparation of exceptionally flat geologic samples beyond the abilities of traditional mechanical polishing, which can deform or otherwise obscure organic surfaces. To meet this demand, broad ion beam (BIB) milling was introduced as a sample preparation technique for SEM petrographic analysis of geologic samples. As with any sample preparation technique, there can be unintended consequences. In this study, we examined the development of nanometer-scale sputter-induced voids caused by BIB milling of thermoset plastic binder material [poly(methyl methacrylate), PMMA] used for the mounting of geologic samples, and artifact sputter-induced voids in the organic matter of Green River Formation and Kimmeridge Clay Formation source rocks. Development of artifact sputter-induced voids was evaluated in relation to variations in the slope of the sample examination surface (0.0–4.9% slope), effectively varying the angle of ion incidence. The results indicate that only minor variations in the angle of ion incidence can generate sputter-induced voids in both PMMA (10.0–386.2 nm diameter sputter-induced voids) and sample sedimentary organic matter (solid bitumen; 12.2–103.6 nm diameter sputter-induced voids). Overall, average artifact pore diameters increased with increasing ion incidence angle within PMMA. Although sputter-induced voids within solid bitumen in the Green River Formation sample were only found in limited extent, the size of these void artifacts falls within the same size range as naturally occurring meso-macroporosity. That is, the pore-like artifacts could easily be misconstrued as naturally developed organic porosity, which is a major concern for SEM-based porosity evaluation methods. This study describes the factors that contribute to the creation of artifact sputter-induced voids, their distinguishing characteristics, and best practices for avoiding the creation of ion-induced artifacts.

International Journal of Coal Geology↗

Geology of the Black Mingo Group (Paleocene) in the Kingstree and St. Stephen areas of South Carolina

Paleocene vertebrate remains from the areas of Kingstree and St. Stephen, South Carolina, come from the Rhems and Williamsburg formations of the Black Mingo Group. Sedimentary textures and fossils indicate that both units accumulated in shallow, nearshore marine, lagoonal, and deltaic depositional environments. Calcareous nannofossils and dinoflagellates indicate that the vertebrate-bearing portions of the Williamsburg Formation near St. Stephen belong within calcareous nannoplankton Zones NP 3-5 (Lower Bridge Member) and within calcareous nannoplankton zones NP 8-9 (Chicora Member). Paleocene vertibrate remains from Kingstree probably all come from near the base of the Rhems Formation.

South Carolina↗

Geology of the Anlauf and Drain quadrangles, Douglas and Lane counties, Oregon

The Anlauf and Drain quadrangles, Oregon, lie about 20 miles south of the City of Eugene, in Douglas and Lane Counties. They constitute an area of about 435 square miles that includes parts of both the Cascade Range and Coast Range physiographic provinces. A sequence of lower Tertiary sedimentary and volcanic rocks with a maximum thickness of about 20,000 feet is exposed in the area. The oldest part of this sequence is the Umpqua formation of early Eocene age consisting of a lower Member of vesicular and amygdaloidal olivine basalt flows, a middle member of water-laid vitric and lapilli crystal tuff, and an upper member of interbedded fissile siltstone and basaltic sandstone which contains a 300-foot tongue of massive to thick-bedded basaltic sandstone near its top. These rocks are predominantly of marine origin, although the general absence of pillow structures Which are common in basaltic lavas of equivalent age elsewhere in the Coast Ranges suggests that some of the flows were poured out subaerially. The overlying tuff member, however, contains Foraminifera and in places has a lime content slightly in excess of 10 percent. Mollusca and Foraminifera indicate that the Umpqua formation is of early Eocene age and is a correlative of the Capay formation of California. The Tyee formation of middle Eocene age overlies the Umpqua formation and consists of more than 5,000 feet of rhythmically deposited sandstone and siltstone in beds 2 to 30 feet thick. The basal part of each bed consists of medium- to coarse-grained sandstone that grades upward into line-grained sandstone and siltstone. The principal constituents of the sandstone are quartz, partly altered feldspar, mica, clay, and fragments of basalt, fine-grained argillaceous rocks, and mica schist. Other detrital minerals include epidote, garnet, blue-green hornblende, tourmaline, and zoisite. The depositional environment of the Tyee formation is poorly known, although the rhythmic-graded bedding suggests turbidity currents. About 500 feet of sandstone and siltstone assigned to the Spencer formation of late Eocene age unconformably overlies the Tyee formation. The Spencer formation, better exposed in the east-central part of the Coast Ranges, contains marine fossils but also has thin impure coal beds, indicative of strand-line accumulation. The sandstone in the Spencer formation is very similar to that in the Tyee formation, from which it was probably derived. The Fisher formation contains about 5,500 feet of nonmarine pyroclastic and Volcanic rocks that are related to the volcanic rock sequences of the western Cascade Range. The formation is characterized by a wide variety of rock types, including conglomerate, tuffaceous sandstone and siltstone, vitric and crystal tuff, waterlaid and mudflow breccia, and andesitic lava flows. These rocks generally occur in lenticular beds that have little stratigraphic significance. The rocks apparently accumulated on a plain slightly above sea level that was subjected alternately to flooding by running water and to desiccation. Fossil leaves from the lowermost part of the Fisher formation are of late Eocene age; the upper part of the formation is of early, and possibly middle, Oligocene age. A few exposures of olivine basalt were mapped in the extreme northern part of the Anlauf quadrangle. The flows, more extensively exposed to the north, overlie the Fisher formation, and, therefore, are tentatively considered to be post-Oligocene in age. All these stratigraphic units, but principally the Fisher formation, are cut by dikes, sills, and stocklike bodies of porphyritic basalt, diabase, and norite. Contemporaneously with the emplacement of most of these rocks, in late Miocene(?) time, hydrothermal solutions locally altered the sedimentary and extrusive igneous rocks and deposited cinnabar and other sulfide minerals, carbonates, and silica. Three parallel northeastward-trending anticlines in the older marine rocks are the most conspicuous structural features in the area. These folds plunge both to the northeast and southwest and expose in their central parts basalt flows of the Umpqua formation. The rocks along the west margin of the area dip westward into a structural basin in the adjacent Elkton quadrangle, whereas to the east the Fisher formation generally has an easterly dip typical of the nonmarine rocks in the western Cascade Range. Geologic studies in the Anlauf and Drain quadrangles were undertaken principally to evaluate the petroleum possibilities of the area. Available data indicate that source beds and reservoir rock suitable for the formation and accumulation of petroleum are absent in this part of the Coast Ranges, but because of the lack of subsurface information, this evaluation is only tentative. Mineral deposits of economic value in the area include quicksilver and alumina clay.

Oregon↗

Geologic structure and altitude of the top of the Minnelusa Formation, northern Black Hills, South Dakota and Wyoming, and Bear Lodge Mountains, Wyoming

Beginning in 1981, a 3-yr project was conducted to determine the availability and quality of groundwater in the sedimentary bedrock aquifers in the Black Hills of South Dakota and Wyoming. The project was limited to three bedrock units in order of increasing age: the Cretaceous Inyan kara Group, Permian and Pennsylvanian Minnelusa Formation, and Mississippian Madison (or Pahasapa) Limestone. This map shows the altitude of the top of the Minnelusa Formation in the northern Black Hills, and shows the configuration of the structural features in the northern part of the Black Hills and the eastern part of the Bear Lodge Mountains. In general, the Minnelusa Formation dips away from the Black Hills uplift, either to the northeast and the Williston Basin or, south of the Bear Lodge Mountains, to the southwest and the Powder River basin, which is outside the map area. In the map area, the upper beds of the Minnelusa Formation are an aquifer and the lower beds are a confining or semi-confining unit. The upper part of the Minnelusa Formation has a greater percentage of coarse-grained sandstone beds than the lower part. Furthermore, solution and removal of anhydrite, brecciation, and solution of cement binding the sandstone grains may have increased the permeability of the upper part of the Minnelusa Formation in the Black Hills. Wells completed in the upper part of the Minnelusa have yields that exceed 100 gal/min in some areas and at least one large diameter well is reported to flow 1,000 gal/min in some areas and at least one large diameter well is reported to flow 1,000 gal/min. Flowing wells have been completed in the Minnelusa aquifer in most of the study area in South Dakota and in about the northern one-half of Crook County, Wyoming. (Lantz-PTT)

Water-Resources Investigations Report↗

Geologic map of the Montauk quadrangle, Dent, Texas, and Shannon Counties, Missouri

The Montauk 7.5-minute quadrangle is located in south-central Missouri within the Salem Plateau region of the Ozark Plateaus physiographic province. About 2,000 feet (ft) of flat-lying to gently dipping lower Paleozoic sedimentary rocks, mostly dolomite, chert, sandstone, and orthoquartzite, overlie Mesoproterozoic igneous basement rocks. Unconsolidated residuum, colluvium, terrace deposits, and alluvium overlie the sedimentary rocks. Numerous karst features, such as caves, springs, and sinkholes, have formed in the carbonate rocks. Many streams are spring fed. The topography is a dissected karst plain with elevations ranging from approximately 830 ft where the Current River exits the middle-eastern edge of the quadrangle to about 1,320 ft in sec. 16, T. 31 N., R. 7 W., in the southwestern part of the quadrangle. The most prominent physiographic features within the quadrangle are the deeply incised valleys of the Current River and its major tributaries located in the center of the map area. The Montauk quadrangle is named for Montauk Springs, a cluster of several springs that resurge in sec. 22, T. 32 N., R. 7 W. These springs supply clean, cold water for the Montauk Fish Hatchery, and the addition of their flow to that of Pigeon Creek produces the headwaters of the Current River, the centerpiece of the Ozark National Scenic Riverways park. Most of the land in the quadrangle is privately owned and used primarily for grazing cattle and horses and growing timber. A smaller portion of the land within the quadrangle is publicly owned by either Montauk State Park or the Ozark National Scenic Riverways (National Park Service). Geologic mapping for this investigation was conducted in 2007 and 2009.

Texas↗

Widespread loess-like deposit in the Martian northern lowlands identifies Middle Amazonian climate change

Consistently mappable units critical to distinguishing the style and interplay of geologic processes through time are sparse in the Martian lowlands. This study identifies a previously unmapped Middle Amazonian (ca. 1 Ga) unit (Middle Amazonian lowland unit, mAl) that postdates the Late Hesperian and Early Amazonian lowland plains by >2 b.y. The unit is regionally defined by subtle marginal scarps and slopes, has a mean thickness of 32 m, and extends >3.1 &times; 10 6 km 2 between lat 35&deg;N and 80&deg;N. Pedestal-type craterforms and nested, arcuate ridges (thumbprint terrain) tend to occur adjacent to unit mAl outcrops, suggesting that current outcrops are vestiges of a more extensive deposit that previously covered &sim;16 &times; 10 6 km 2 . Exposed layers, surface pits, and the draping of subjacent landforms allude to a sedimentary origin, perhaps as a loess-like deposit emplaced rhythmically through atmospheric fallout. We propose that unit mAl accumulated coevally with, and at the expense of, the erosion of the north polar basal units, identifying a major episode of Middle Amazonian climate-driven sedimentation in the lowlands. This work links ancient sedimentary processes to climate change that occurred well before those implied by current orbital and spin axis models.

Geology↗

Geology and ground-water resources of the island of Hawaii

Hawaii, the largest island in the Hawaiian group, is 93 miles long, 76 miles wide, and covers 4,030 square miles. Mauna Loa Volcano is 13,680 feet high and Mauna Kea is 13,784 feet high. Plate 1 shows the geology, wells, springs, and water-development tunnels. Plate 2 is a map and description of points of geologic interest along the main highways. Plate 3 (same sheet as plate 2) shows highways and points of geologic interest in Hawaii National Park area. The volcanic terms used in the report are defined. Hawaii was built by five volcanoes. All the rocks are volcanic, except for minor amounts of sedimentary rock derived from them. Mauna Loa and Kilauea volcanoes erupt often; Hualalai Volcano last erupted in 1801; Mauna Kea has had Recent but no historic eruptions; Kohala Mountain has long been extinct. Kohala Mountain constitutes the northern end of the island. It is built largely of rocks of the Pololu volcanic series which are dominantly olivine basalt with a few thin intercalated beds of vitric basaltic ash. After the eruption of this series, Kohala Volcano was deeply eroded on the windward (northeastern) side, and a deep soil formed on its other slopes. Later, oligoclase andesite and trachyte lava flows, named the Hawi volcanic series, were erupted. They rest on soil at the top of the Pololu series, and lie in the valleys cut into the Pololu lavas on the windward slope. Both the Pololu and Hawi volcanics were erupted from three rift zones trending N. 35&deg; W., S. 65&deg; E., and S. 50&deg; W. from the summit of the mountain. The rift zones are marked at the surface by rows or cinder cones, and beneath the surface by innumerable dikes. A caldera occupied the summit of the mountain at the beginning of the eruption of the Hawi lavas, and for a time confined the flows. It was gradually filled and the lava escaped northeastward into the large valleys. Some of the caldera faults can still be traced. A shallow graben indents the summit now. South of Kohala Mountain lies the much larger volcano of Mauna Kea. The early rocks of Mauna Kea constitute the Hamakua volcanic series. The lower member of this series consists chiefly of olivine basalt flows with intercalated thin beds of vitric basaltic ash. The olivine basalt of the lower member changes gradationally into the upper member, in which basalt and olivine basalt arc still abundant, but andesite also is present. Lavas of the upper member interfinger with Hawi lavas of Kohala Mountain. The Hamakua volcanic series is mantled with Pahala ash 5 to 20 feet thick, above which lie the rocks of the Laupahoehoe volcanic series. Locally the two series are separated by erosional unconformity, The Laupahoehoe lavas are dominantly andesite. The andesites erupted after the last glacial epoch are mapped separately on plate 1. The Laupahoehoe volcanic series, and probably also the Hamakua volcanic series, were erupted principally from three rift zones, trending west, northeast and south-southeast from the summit of the mountain. The upper slopes are studded with many large cinder cones, lying principally along the rift zones. Late in its geologic history, Mauna Kea was capped by a small glacier, presumably contemporaneous with the Wisconsin stage of glaciation in North America, which left conspicuous terminal, lateral, and ground moraines. Deposits exposed in canyons on the southern slope, formerly believed to be of glacial origin, are now believed to be volcanic explosion breccias. The main bulk of Hualalai Volcano is built of basalts of the Hualalai volcanic series. One flow of andesite has been found. The cinder and spatter cones lie principally along three rift zones which trend northwest, north, and southeast from the summit. On the northern slope of Hualalai Volcano lies the large trachyte pumice cone of Puu Waawaa, and its thick flow of trachyte. These are grouped together as the Waawaa volcanics. They are partly buried by later basalts from both Hualalai and Mauna Loa. The last eruption of Hualalai Volcano, in 1800&ndash;1801, produced olivine basalt. The earliest exposed rocks of Mauna Loa comprise the Ninole volcanic series. Several beds of altered vitric ash are intercalated with the lavas. Following eruption of the Ninole series, a long period or quiescence occurred, during which deep amphitheater-headed valleys were cut. This was followed by the eruption of the Kahuku volcanic series, consisting mostly of lavas with some thin beds of ash. The Rahuku series is overlain by the Pahala ash, which overlies also the Hilina volcanic series on Kilauea, the Hamakua volcanic series on Mauna Kea, and the Hawi volcanic series on Kohala, providing a rough datum for correlation of the lavas of the four mountains. Deposition of the Pahala ash was followed on Mauna Loa by eruption of the Kau volcanic series, which has continued until the present time. The historic and flaws of the Kau series are mapped separately on plate 1. The historic eruptions and volcanic activity of Mauna Loa are briefly described. The western and southern slopes of Mauna Loa are cut by normal faults along which the lower flanks of the mountain have slipped seaward. The Kau volcanic series and presumably also the Kahuku and Ninole volcanic series were erupted principally from vents along two rift zones which extend northeast and southwest from the summit caldera. The lavas of all three series are preponderantly olivine basalt. Many of the lavas contain small amounts of hypersthene. The Pahala ash on the northeastern and eastern slopes of Mauna Loa was derived largely from Mauna Kea. West and south of Kilauea Caldera, however, it was derived principally from Kilauea. Minor amounts were contributed by eruptions of Mauna Loa. It is a vitric basaltic ash, now generally altered to palagonite. The earliest exposed lavas and thin intercalated ash beds of Kilauea Volcano comprise the Hilina volcanic series. These are capped by the Pahala ash, which in turn, is overlain by the lavas and thin ash beds of the Puna volcanic series. The volcanics of both series were erupted along two rift zones, one extending southwestward from Kilauea Caldera, and the other extending southeastward for 5 miles and then bending sharply east by north. The lavas of both series are very largely olivine basalt. A few flows contain hypersthene. Augite phenocrysts are common in Mauna Loa lavas, but rare in those of Kilauea, indicating that crystallization has not progressed as far in the magma chamber of Kilauea Volcano as in that of Mauna Loa. Eruption of the Puna volcanic series has continued until the present time, the historic flows being separated from the prehistoric ones on plate 1. The historic eruptions and volcanic activity of Kilauea are briefly described. Kilauea Volcano originated on the southern slope of Mauna Loa where faults intersected the Eastern Fundamental Fissure of the Hawaiian Archipelago. The southern flank of Kilauea is cut by normal faults, along which the southern part is sliding seaward. The volcanoes of the island of Hawaii are believed to have started their activity in the Tertiary period. The great erosional period which followed deposition of the Pololu and Ninole volcanic series is placed near the end of the Pliocene. The Hilina and Hamakua volcanic series were probably erupted in the late Pliocene and earlier Pleistocene. The Hawi volcanic series and the Waawaa volcanics are probably early or middle Pleistocene in age. The main period of deposition of the Pahala ash was probably late in the middle Pleistocene or early in the upper Pleistocene. The Laupahoehoe volcanic series is late Pleistocene and Recent in age, most of the flows antedating the Wisconsin glaciation. The Hualalai volcanic series probably extends from Tertiary to historic time, and the Kau and Puna volcanic series from late Pleistocene to the present. A chapter is devoted to the petrography of the rocks in which are listed all reliable chemical rock analyses. The rocks of the island are highly permeable. Most of the rainfall sinks quickly into the ground. Perennial streams are present only on the windward slopes of Kohala Mountain and Mauna Kea. Most of the water sinks rapidly to the basal water table, where it floats on salt water according to the Ghyben-Herzberg principle. Basal water escapes in springs at or near sea level all along the coast. Only a very small proportion of it is recovered in wells. Along the windward coasts the basal water is of good quality and large supplies await development. Along the leeward coasts most of the basal water is brackish. In Kohala Mountain, much water is perched on ash beds in the Pololu volcanic series and on ash and soil at the base of the Hawi volcanic series. It escapes in perched springs in the big valleys and along the windward sea cliff and is recovered in tunnels. Along the windward slope of Mauna Keu, small amounts of water are perched by ash beds and dense lava flows in the Hamakua volcanic series. Small perched springs issue from these structures and water is recovered by tunnels. In the Kau District ash beds perch considerable water, which is recovered by many tunnels. On the southern slope of Mauna Kea small springs are perched by beds of hill wash. Dikes in the rift zones are relatively impermeable, but enclose masses of permeable rock. Water is confined at high level in the interdike compartments in Kohala Mountain, and probably in the other volcanoes. It escapes in high-level springs in the deep valleys on Kohala Mountain; some of it is recovered by tunnels. It is estimated that an average of about 13,085 million gallons of water a day falls as rain over the whole island. Of this only about 2.5 percent is visibly discharged from wells, tunnels, and springs. Large supplies of basal groundwater await development. Projects for development of additional water for the city of Hilo and the Kona District are described. Chemical analyses of water, water supplies of towns and villages, descriptions of wells, springs, and tunnels, and discharge records of numerous springs and tunnels are given in tabulated form.

Hawaii↗