USGS Science⌕ Search

SEARCH · USGS Science

Results for “Remote Sensing”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources
USGS2014

Modeling a historical mountain pine beetle outbreak using Landsat MSS and multiple lines of evidence

Mountain pine beetles are significant forest disturbance agents, capable of inducing widespread mortality in coniferous forests in western North America. Various remote sensing approaches have assessed the impacts of beetle outbreaks over the last two decades. However, few studies have addressed the impacts of historical mountain pine beetle outbreaks, including the 1970s event that impacted Glacier National Park. The lack of spatially explicit data on this disturbance represents both a major data gap and a critical research challenge in that wildfire has removed some of the evidence from the landscape. We utilized multiple lines of evidence to model forest canopy mortality as a proxy for outbreak severity. We incorporate historical aerial and landscape photos, aerial detection survey data, a nine-year collection of satellite imagery and abiotic data. This study presents a remote sensing based framework to (1) relate measurements of canopy mortality from fine-scale aerial photography to coarse-scale multispectral imagery and (2) classify the severity of mountain pine beetle affected areas using a temporal sequence of Landsat data and other landscape variables. We sampled canopy mortality in 261 plots from aerial photos and found that insect effects on mortality were evident in changes to the Normalized Difference Vegetation Index (NDVI) over time. We tested multiple spectral indices and found that a combination of NDVI and the green band resulted in the strongest model. We report a two-step process where we utilize a generalized least squares model to account for the large-scale variability in the data and a binary regression tree to describe the small-scale variability. The final model had a root mean square error estimate of 9.8% canopy mortality, a mean absolute error of 7.6% and an R 2 of 0.82. The results demonstrate that a model of percent canopy mortality as a continuous variable can be developed to identify a gradient of mountain pine beetle severity on the landscape.

Montana↗
USGS2025

Automated generation of an urban synthetic elevation checkpoint network across the North Carolina coastline, USA

Lidar and structure from motion-derived digital elevation and surface models have widespread application. Consideration of a topographic model's vertical root mean squared error (RMSEz) and systematic directional bias is important for many of these applications, particularly landscape change detection and measurement. Due to logistic, resource, and time constraints, wide area remotely sensed topographic surveys are not always accompanied by an in situ checkpoint network for validating and characterizing survey error. Here we describe and test a method for automatically generating synthetic elevation checkpoints in bulk across hundreds of kilometers using a publicly available lidar-derived DEM time-series, road vector network, and landcover classification map. Our method produced 6000–10,000 synthetic checkpoints across the developed barrier island coastline of North Carolina. These checkpoints characterized vertical error metrics in a statistically similar way as in situ checkpoints when assessing the vertical accuracy of a contemporary lidar-derived DEM and produced RMSEz metrics an average of 0.018 m from the RMSEz of historical lidar DEMs published with tested accuracy metrics. This new method has the potential to A) lower the cost and time required to validate new remotely sensed topographic surveys by reducing or eliminating the field work associated with in situ checkpoint surveys, B) provide a means of retroactively assessing the absolute vertical accuracy and systematic bias of historical topographic datasets that were not published with tested accuracy metrics, and C) generate reference networks to assess and correct spatially variable patterns of vertical bias in topographic datasets.

North Carolina↗
USGS2022

Multi-species inference of exotic annual and native perennial grasses in rangelands of the western United States using Harmonized Landsat and Sentinel-2 data

The invasion of exotic annual grass (EAG), e.g., cheatgrass ( Bromus tectorum ) and medusahead ( Taeniatherum caput-medusae ), into rangeland ecosystems of the western United States is a broad-scale problem that affects wildlife habitats, increases wildfire frequency, and adds to land management costs. However, identifying individual species of EAG abundance from remote sensing, particularly at early stages of invasion or growth, can be problematic because of overlapping controls and similar phenological characteristics among native and other exotic vegetation. Subsequently, refining and developing tools capable of quantifying the abundance and phenology of annual and perennial grass species would be beneficial to help inform conservation and management efforts at local to regional scales. Here, we deploy an enhanced version of the U.S. Geological Survey Rangeland Exotic Plant Monitoring System to develop timely and accurate maps of annual (2016–2020) and intra-annual (May 2021 and July 2021) abundances of exotic annual and perennial grass species throughout the rangelands of the western United States. This monitoring system leverages field observations and remote-sensing data with artificial intelligence/machine learning to rapidly produce annual and early season estimates of species abundances at a 30-m spatial resolution. We introduce a fully automated and multi-task deep-learning framework to simultaneously predict and generate weekly, near-seamless composites of Harmonized Landsat Sentinel-2 spectral data. These data, along with auxiliary datasets and time series metrics, are incorporated into an ensemble of independent XGBoost models. This study demonstrates that inclusion of the Normalized Difference Vegetation Index and Normalized Difference Wetness Index time-series data generated from our deep-learning framework enables near real-time and accurate mapping of EAG (Median Absolute Error (MdAE): 3.22, 2.72, and 0.02; and correlation coefficient (r): 0.82, 0.81, and 0.73; respectively for EAG, cheatgrass, and medusahead) and native perennial grass abundance (MdAE: 2.51, r:0.72 for Sandberg bluegrass ( Poa secunda )). Our approach and the resulting data provide insights into rangeland grass dynamics, which will be useful for applications, such as fire and drought monitoring, habitat suitability mapping, as well as land-cover and land-change modelling. Spatially explicit, timely, and accurate species-specific abundance datasets provide invaluable information to land managers.

western United States↗
USGS2024

Evaluating the potential for efficient, UAS-based reach-scale mapping of river channel bathymetry from multispectral images

Introduction: Information on spatial patterns of water depth in river channels is valuable for numerous applications, but such data can be difficult to obtain via traditional field methods. Ongoing developments in remote sensing technology have enabled various image-based approaches for mapping river bathymetry; this study evaluated the potential to retrieve depth from multispectral images acquired by an uncrewed aircraft system (UAS). Methods: More specifically, we produced depth maps for a 4 km reach of a clear-flowing, relatively shallow river using an established spectrally based algorithm, Optimal Band Ratio Analysis. To assess accuracy, we compared image-derived estimates to direct measurements of water depth. The field data were collected by wading and from a boat equipped with an echo sounder and used to survey cross sections and a longitudinal profile. We partitioned our study area along the Sacramento River, California, USA, into three distinct sub-reaches and acquired a separate image for each one. In addition to the typical, self-contained, per-image depth retrieval workflow, we also explored the possibility of exporting a relationship between depth and reflectance calibrated using data from one site to the other two sub-reaches. Moreover, we evaluated whether sampling configurations progressively more sparse than our full field survey could still provide sufficient calibration data for developing robust depth retrieval models. Results: Our results indicate that under favorable environmental conditions like those observed on the Sacramento River during low flow, accurate, precise depth maps can be derived from images acquired by UAS, not only within a sub-reach but also across multiple, adjacent sub-reaches of the same river. Discussion: Moreover, our findings imply that the level of effort invested in obtaining field data for calibration could be significantly reduced. In aggregate, this investigation suggests that UAS-based remote sensing could facilitate highly efficient, cost-effective, operational mapping of river bathymetry at the reach scale in clear-flowing streams.

California↗
USGS2014

High spatial resolution WorldView-2 imagery for mapping NDVI and its relationship to temporal urban landscape evapotranspiration factors

Evapotranspiration estimation has benefitted from recent advances in remote sensing and GIS techniques particularly in agricultural applications rather than urban environments. This paper explores the relationship between urban vegetation evapotranspiration (ET) and vegetation indices derived from newly-developed high spatial resolution WorldView-2 imagery. The study site was Veale Gardens in Adelaide, Australia. Image processing was applied on five images captured from February 2012 to February 2013 using ERDAS Imagine. From 64 possible two band combinations of WorldView-2, the most reliable one (with the maximum median differences) was selected. Normalized Difference Vegetation Index (NDVI) values were derived for each category of landscape cover, namely trees, shrubs, turf grasses, impervious pavements, and water bodies. Urban landscape evapotranspiration rates for Veale Gardens were estimated through field monitoring using observational-based landscape coefficients. The relationships between remotely sensed NDVIs for the entire Veale Gardens and for individual NDVIs of different vegetation covers were compared with field measured urban landscape evapotranspiration rates. The water stress conditions experienced in January 2013 decreased the correlation between ET and NDVI with the highest relationship of ET-Landscape NDVI (Landscape Normalized Difference Vegetation Index) for shrubs (r 2 = 0.66) and trees (r 2 = 0.63). However, when the January data was excluded, there was a significant correlation between ET and NDVI. The highest correlation for ET-Landscape NDVI was found for the entire Veale Gardens regardless of vegetation type (r 2 = 0.95, p > 0.05) and the lowest one was for turf (r 2 = 0.88, p > 0.05). In support of the feasibility of ET estimation by WV2 over a longer period, an algorithm recently developed that estimates evapotranspiration rates based on the Enhanced Vegetation Index (EVI) from MODIS was employed. The results revealed a significant positive relationship between ETMODIS and ETWV2 (r 2 = 0.9857, p > 0.05). This indicates that the relationship between NDVI using high resolution WorldView-2 imagery and ground-based validation approaches could provide an effective predictive tool for determining ET rates from unstressed mixed urban landscape plantings.

Adelaide↗
USGS2025

Absolute radiometric calibration evaluation of Uncrewed Aerial System (UAS) Headwall and MicaSense sensors and improving data quality using the Empirical Line Method

The use of Uncrewed Aerial Systems (UASs) for remote sensing applications has increased significantly in recent years due to their low cost, operational flexibility, and rapid advancements in sensor technologies. In many cases, UAS platforms are considered viable alternatives to conventional satellite and crewed airborne platforms, offering very high spatial, spectral, and temporal resolution data. However, the radiometric quality of UAS-acquired data has not received equivalent attention, particularly with respect to absolute calibration. In this study, we (1) evaluate the absolute radiometric performance of two commonly used UAS sensors: the Headwall Nano-Hyperspec hyperspectral sensor and the MicaSense RedEdge-MX Dual Camera multispectral system; (2) assess the effectiveness of the Empirical Line Method (ELM) in improving the radiometric accuracy of reflectance products generated by these sensors; and (3) investigate the influence of calibration target characteristics—including size, material type, reflectance intensity, and quantity—on the performance of ELM for UAS data. A field campaign was conducted jointly by the U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center and the USGS National Uncrewed Systems Office (NUSO) from 15 to 18 July 2023, at the USGS EROS Ground Validation Radiometer (GVR) site in Sioux Falls, South Dakota, USA, over a 160 m × 160 m vegetated area. Absolute calibration accuracy was evaluated by comparing UAS sensor-derived reflectance to in situ measurements of the site. Results indicate that the Headwall Nano-Hyperspec and MicaSense sensors underestimated reflectance by approximately 0.05 and 0.015 reflectance units, respectively. While the MicaSense sensor demonstrated better inherent radiometric accuracy, it exhibited saturation over bright targets due to limitations in its automatic gain and exposure settings. Application of the ELM using just two calibration targets reduced discrepancies to within 0.005 reflectance units. Reflectance products generated using various target materials—such as felt, melamine, or commercially available validation targets—showed comparable agreement with in situ measurements when used with the Nano-Hyperspec sensor. Furthermore, increasing the number of calibration targets beyond two did not yield measurable improvements in calibration accuracy. At a flight altitude of 200 ft above ground level (AGL), a target size of 0.6 m × 0.6 m or larger was sufficient to provide pure pixels for ELM implementation, whereas smaller targets (e.g., 0.3 m × 0.3 m) posed challenges in isolating pure pixels. Overall, the standard manufacturer-recommended calibration procedures were insufficient for achieving high radiometric accuracy with the tested sensors, which may restrict their applicability in scenarios requiring greater accuracy and precision. The use of the ELM significantly improved data quality, enhancing the reliability and applicability of UAS-based remote sensing in contexts requiring high precision and accuracy.

Remote Sensing↗
USGS2021

Quantifying plant-soil-nutrient dynamics in rangelands: Fusion of UAV hyperspectral-LiDAR, UAV multispectral-photogrammetry, and ground-based LiDAR-digital photography in a shrub-encroached desert grassland

Rangelands cover 70% of the world's land surface, and provide critical ecosystem services of primary production, soil carbon storage, and nutrient cycling. These ecosystem services are governed by very fine-scale spatial patterning of soil carbon, nutrients, and plant species at the centimeter-to-meter scales, a phenomenon known as “islands of fertility”. Such fine-scale dynamics are challenging to detect with most satellite and manned airborne platforms. Remote sensing from unmanned aerial vehicles (UAVs) provides an alternative option for detecting fine-scale soil nutrient and plant species changes in rangelands tn0020 smaller extents. We demonstrate that a model incorporating the fusion of UAV multispectral and structure-from-motion photogrammetry classifies plant functional types and bare soil cover with an overall accuracy of 95% in rangelands degraded by shrub encroachment and disturbed by fire. We further demonstrate that employing UAV hyperspectral and LiDAR fusion greatly improves upon these results by classifying 9 different plant species and soil fertility microsite types (SFMT) with an overall accuracy of 87%. Among them, creosote bush and black grama, the most important native species in the rangeland, have the highest producer's accuracies at 98% and 94%, respectively. The integration of UAV LiDAR-derived plant height differences was critical in these improvements. Finally, we use synthesis of the UAV datasets with ground-based LiDAR surveys and lab characterization of soils to estimate that the burned rangeland potentially lost 1474 kg/ha of C and 113 kg/ha of N owing to soil erosion processes during the first year after a prescribed fire. However, during the second-year post-fire, grass and plant-interspace SFMT functioned as net sinks for sediment and nutrients and gained approximately 175 kg/ha C and 14 kg/ha N, combined. These results provide important site-specific insight that is relevant to the 423 Mha of grasslands and shrublands that are burned globally each year. While fire, and specifically post-fire erosion, can degrade some rangelands, post-fire plant-soil-nutrient dynamics might provide a competitive advantage to grasses in rangelands degraded by shrub encroachment. These novel UAV and ground-based LiDAR remote sensing approaches thus provide important details towards more accurate accounting of the carbon and nutrients in the soil surface of rangelands.

New Mexico↗
USGS2017

Prediction of forest canopy and surface fuels from Lidar and satellite time series data in a bark beetle-affected forest

Wildfire behavior depends on the type, quantity, and condition of fuels, and the effect that bark beetle outbreaks have on fuels is a topic of current research and debate. Remote sensing can provide estimates of fuels across landscapes, although few studies have estimated surface fuels from remote sensing data. Here we predicted and mapped field-measured canopy and surface fuels from light detection and ranging (lidar) and Landsat time series explanatory variables via random forest (RF) modeling across a coniferous montane forest in Colorado, USA, which was affected by mountain pine beetles ( Dendroctonus ponderosae Hopkins) approximately six years prior. We examined relationships between mapped fuels and the severity of tree mortality with correlation tests. RF models explained 59%, 48%, 35%, and 70% of the variation in available canopy fuel, canopy bulk density, canopy base height, and canopy height, respectively (percent root-mean-square error (%RMSE) = 12–54%). Surface fuels were predicted less accurately, with models explaining 24%, 28%, 32%, and 30% of the variation in litter and duff, 1 to 100-h, 1000-h, and total surface fuels, respectively (%RMSE = 37–98%). Fuel metrics were negatively correlated with the severity of tree mortality, except canopy base height, which increased with greater tree mortality. Our results showed how bark beetle-caused tree mortality significantly reduced canopy fuels in our study area. We demonstrated that lidar and Landsat time series data contain substantial information about canopy and surface fuels and can be used for large-scale efforts to monitor and map fuel loads for fire behavior modeling at a landscape scale.

Colorado↗
USGS2026

Sentinel-2 for chlorophyll-a water quality monitoring: A review of validation evidence and application potential

Water quality monitoring is integral to preserving the health of freshwater ecosystems, and satellite remote sensing has emerged as one monitoring method. Sentinel-2, in particular, has been valuable for water quality monitoring due to its 5-day global temporal revisit time and spatial resolution that ranges from 10 to 60 metres. Sentinel-2 can be used to measure and monitor chlorophyll-a, which historically has been used as an indicator of water quality, eutrophication and harmful algal blooms. Our goal was to review aquatic chlorophyll-a Sentinel-2 research to assess the types of validation evidence reported. Validation evidence is defined here as the set of information key to assessing algorithm performance, and include the spatial and temporal scales of satellite validation, reported in situ sampling method context information, demonstration of validation results through plots, and appropriate algorithm performance metrics. We highlight how the body of literature collectively contributes to advancing a national scale chlorophyll-a product that could support future resource management applications. Our review of 122 published studies indicated that much of the validation evidence corresponded to early stages, as defined by the NASA data maturity framework, due to a limited focus on individual lakes and limited detail on methodology for reproducibility. Prioritizing data accessibility for both in situ data and satellite workflows used in published studies; reporting methods with transparency and consistency; and using standard algorithm performance metrics could provide a consistent framework to support and enhance the utility of satellite inland water quality research. These three quality assurance mechanisms can promote effective evaluation of approaches for remote sensing of chlorophyll-a. Adopting these quality criteria could enable the integration of validation evidence from multiple studies, supporting more spatially and temporally representative products that would advance these approaches towards maturation for broader application.

International Journal of Remote Sensing↗
USGS2009

Calibration and validation of the relative differenced Normalized Burn Ratio (RdNBR) to three measures of fire severity in the Sierra Nevada and Klamath Mountains, California, USA

Multispectral satellite data have become a common tool used in the mapping of wildland fire effects. Fire severity, defined as the degree to which a site has been altered, is often the variable mapped. The Normalized Burn Ratio (NBR) used in an absolute difference change detection protocol (dNBR), has become the remote sensing method of choice for US Federal land management agencies to map fire severity due to wildland fire. However, absolute differenced vegetation indices are correlated to the pre-fire chlorophyll content of the vegetation occurring within the fire perimeter. Normalizing dNBR to produce a relativized dNBR (RdNBR) removes the biasing effect of the pre-fire condition. Employing RdNBR hypothetically allows creating categorical classifications using the same thresholds for fires occurring in similar vegetation types without acquiring additional calibration field data on each fire. In this paper we tested this hypothesis by developing thresholds on random training datasets, and then comparing accuracies for (1) fires that occurred within the same geographic region as the training dataset and in similar vegetation, and (2) fires from a different geographic region that is climatically and floristically similar to the training dataset region but supports more complex vegetation structure. We additionally compared map accuracies for three measures of fire severity: the composite burn index (CBI), percent change in tree canopy cover, and percent change in tree basal area. User's and producer's accuracies were highest for the most severe categories, ranging from 70.7% to 89.1%. Accuracies of the moderate fire severity category for measures describing effects only to trees (percent change in canopy cover and basal area) indicated that the classifications were generally not much better than random. Accuracies of the moderate category for the CBI classifications were somewhat better, averaging in the 50%-60% range. These results underscore the difficulty in isolating fire effects to individual vegetation strata when fire effects are mixed. We conclude that the models presented here and in Miller and Thode ([Miller, J.D. & Thode, A.E., (2007). Quantifying burn severity in a heterogeneous landscape with a relative version of the delta Normalized Burn Ratio (dNBR). Remote Sensing of Environment, 109, 66-80.]) can produce fire severity classifications (using either CBI, or percent change in canopy cover or basal area) that are of similar accuracy in fires not used in the original calibration process, at least in conifer dominated vegetation types in Mediterranean-climate California.

Remote Sensing of Environment↗
USGS2019

Evaluating k-nearest neighbor (kNN) imputation models for species-level aboveground forest biomass mapping in northeast China

Quantifying spatially explicit or pixel-level aboveground forest biomass (AFB) across large regions is critical for measuring forest carbon sequestration capacity, assessing forest carbon balance, and revealing changes in the structure and function of forest ecosystems. When AFB is measured at the species level using widely available remote sensing data, regional changes in forest composition can readily be monitored. In this study, wall-to-wall maps of species-level AFB were generated for forests in Northeast China by integrating forest inventory data with Moderate Resolution Imaging Spectroradiometer (MODIS) images and environmental variables through applying the optimal k -nearest neighbor ( k NN) imputation model. By comparing the prediction accuracy of 630 k NN models, we found that the models with random forest (RF) as the distance metric showed the highest accuracy. Compared to the use of single-month MODIS data for September, there was no appreciable improvement for the estimation accuracy of species-level AFB by using multi-month MODIS data. When k > 7, the accuracy improvement of the RF-based k NN models using the single MODIS predictors for September was essentially negligible. Therefore, the k NN model using the RF distance metric, single-month (September) MODIS predictors and k = 7 was the optimal model to impute the species-level AFB for entire Northeast China. Our imputation results showed that average AFB of all species over Northeast China was 101.98 Mg/ha around 2000. Among 17 widespread species, larch was most dominant, with the largest AFB (20.88 Mg/ha), followed by white birch (13.84 Mg/ha). Amur corktree and willow had low AFB (0.91 and 0.96 Mg/ha, respectively). Environmental variables (e.g., climate and topography) had strong relationships with species-level AFB. By integrating forest inventory data and remote sensing data with complete spatial coverage using the optimal k NN model, we successfully mapped the AFB distribution of the 17 tree species over Northeast China. We also evaluated the accuracy of AFB at different spatial scales. The AFB estimation accuracy significantly improved from stand level up to the ecotype level, indicating that the AFB maps generated from this study are more suitable to apply to forest ecosystem models (e.g., LINKAGES) which require species-level attributes at the ecotype scale.

Remote Sensing↗
USGS2007

Adequacy of satellite derived rainfall data for stream flow modeling

Floods are the most common and widespread climate-related hazard on Earth. Flood forecasting can reduce the death toll associated with floods. Satellites offer effective and economical means for calculating areal rainfall estimates in sparsely gauged regions. However, satellite-based rainfall estimates have had limited use in flood forecasting and hydrologic stream flow modeling because the rainfall estimates were considered to be unreliable. In this study we present the calibration and validation results from a spatially distributed hydrologic model driven by daily satellite-based estimates of rainfall for sub-basins of the Nile and Mekong Rivers. The results demonstrate the usefulness of remotely sensed precipitation data for hydrologic modeling when the hydrologic model is calibrated with such data. However, the remotely sensed rainfall estimates cannot be used confidently with hydrologic models that are calibrated with rain gauge measured rainfall, unless the model is recalibrated. ?? Springer Science+Business Media, Inc. 2007.

Natural Hazards↗
USGS2015

Advanced Land Observing Satellite (ALOS) Phased Array Type L-Band Synthetic Aperture Radar (PALSAR) mosaic for the Kahiltna terrane, Alaska, 2007-2010

The U.S. Geological Survey (USGS) has initiated a multi-disciplinary study investigating the applicability of remote sensing technologies for geologic mapping and identification of prospective areas for base and precious metal deposits in remote parts of Alaska. The Kahiltna terrane in southwestern Alaska was selected for investigation because of its known mineral deposits and potential for additional mineral resources. An assortment of technologies is being investigated to aid in remote analysis of terrain, and includes imaging spectroscopy (hyperspectral remote sensing), high spatial resolution electro-optical imagery, and Synthetic Aperture Radar (SAR). However, there are significant challenges to applying imaging spectroscopy and electro-optical imagery technologies in this area because of the low solar angle for parts of the year, seasonal periods of darkness and snow cover, and the frequently cloudy weather that characterizes Alaska. Synthetic Aperture Radar (SAR) was selected because this technology does not rely on solar illumination and has all-weather capability. The USGS has compiled a continuous, cloud-free 12.5-meter resolution radar mosaic of SAR data of approximately 212,000 square kilometers to examine the suitability of this technology for geologic mapping. This mosaic was created from Advanced Land Observing Satellite (ALOS) Phased Array type L-band Synthetic Aperture Radar (PALSAR) data collected from 2007 to 2010 spanning the Kahiltna terrane and the surrounding area. Interpretation of these data may help geologists understand past geologic processes and identify areas with potential for near-surface mineral resources for further ground-based geological and geochemical investigations.

Alaska↗
USGS2001

MAUP: Modifiable Areal Unit Problem in raster GIS datasets. Raster pixels as modifiable areas

The Modifiable Areal Unit Problem (MAUP) is a well-studied aspect of geographic phenomena. It is usually associated with socio-economic data collected by census enumeration units. This problem also applies directly to geographic data in raster formats, including both GIS categorical data layers and remotely sensed images. The author briefly provides a foundation for examining the component parts of the MAUP in remotely sensed raster data.

GIM International↗
USGS1990

Procedures for woody vegetation surveys in the Kazgail rural council area, Kordofan, Sudan

Efforts to reforest parts of the Kordofan Province of Sudan are receiving support from international development agencies. These efforts include planning and implementing reforestation activities that require the collection of natural resources and socioeconomic data, and the preparation of base maps. A combination of remote sensing, geographic information system and global positioning systems procedures are used in this study to meet these requirements. Remote sensing techniques were used to provide base maps and to guide the compilation of vegetation resources maps. These techniques provided a rapid and efficient method for documenting available resources. Pocket‐sized global positioning system units were used to establish the location of field data collected for mapping and resource analysis. A microcomputer data management system tabulated and displayed the field data. The resulting system for data analysis, management, and planning has been adopted for the mapping and inventory of the Gum Belt of Sudan.

Geocarto International↗
USGS2014

National Land Imaging Requirements (NLIR) Pilot Project summary report: Summary of moderate resolution imaging user requirements

Under the National Land Imaging Requirements (NLIR) Project, the U.S. Geological Survey (USGS) is developing a functional capability to obtain, characterize, manage, maintain and prioritize all Earth observing (EO) land remote sensing user requirements. The goal is a better understanding of community needs that can be supported with land remote sensing resources, and a means to match needs with appropriate solutions in an effective and efficient way. The NLIR Project is composed of two components. The first component is focused on the development of the Earth Observation Requirements Evaluation System (EORES) to capture, store and analyze user requirements, whereas, the second component is the mechanism and processes to elicit and document the user requirements that will populate the EORES. To develop the second component, the requirements elicitation methodology was exercised and refined through a pilot project conducted from June to September 2013. The pilot project focused specifically on applications and user requirements for moderate resolution imagery (5–120 meter resolution) as the test case for requirements development. The purpose of this summary report is to provide a high-level overview of the requirements elicitation process that was exercised through the pilot project and an early analysis of the moderate resolution imaging user requirements acquired to date to support ongoing USGS sustainable land imaging study needs. The pilot project engaged a limited set of Federal Government users from the operational and research communities and therefore the information captured represents only a subset of all land imaging user requirements. However, based on a comparison of results, trends, and analysis, the pilot captured a strong baseline of typical applications areas and user needs for moderate resolution imagery. Because these results are preliminary and represent only a sample of users and application areas, the information from this report should only be used to indicate general user needs for the applications covered. Users of the information are cautioned that use of specific numeric results may be inappropriate without additional research. Any information used or cited from this report should specifically be cited as preliminary findings.

Open-File Report↗
USGS1989

Remote characterization of marine bird habitats with satellite imagery

Remote sensing techniques such as radar altimetry, synthetic aperture radar, coastal zone color scanning, and infrared radiometry provide effective, instantaneous, and relatively inexpensive means for characterizing critical habitats of marine birds. In order to make optimal use of satellite-derived data, the rationale for marine habitat classification is presented, and advantages and limitations of different remote sensing techniques are discussed. An application of remote characterization is used to test for short-term habitat use and selection by the Black-Capped Petrel ( Pterodroma hasitata ). By comparing synoptic satellite mapping (e.g. infrared radiometry) with ship-board censusing, it was possible to demonstrate that petrels did not use all marine habitats equally, nor did petrels use habitats in proportion to their availability (areal extent).

Colonial Waterbirds↗
USGS1981

Studying the Earth from space

Space age technology contains a key to increased knowledge about the Earth's resources; this key is remote sensing detecting the nature or condition of something without actually touching it. An early and still most useful form of remote sensing is photography which records the scene, as man sees it, on film sensitive to that part of the electromagnetic spectrum called visible energy. Electromagnetic energy travels in waves of various lengths; most are invisible to the human eye. Wavelengths progressively longer than those that the eye can see are infrared and microwave. Wavelengths progressively shorter than the eye can see are ultraviolet, X-rays, and gamma rays.

General Information Product↗