USGS Science⌕ Search

SEARCH · USGS Science

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources
USGS1969

Recent surface movements in the Baldwin Hills, Los Angeles County, California

The Baldwin Hills are located in the northwest part of the densely populated Los Angeles basin. They comprise one of several groups of isolated hills that extend along the northwest-trending Newport-Inglewood zone of folds and faults, a structural lineament identified with a series of very productive oil fields. In addition to being the site of the Inglewood oil field, these hills are the site of surface deformation that has been monitored for over 35 years. This record of deformation, which includes differential subsidence, horizontal displacements, and surface rupturing, forms one of the best documented examples of oilfield-associated surface deformation yet recognized. The deformation is described in detail, analyzed as to cause(s), and finally attributed largely or essentially entirely to the exploitation of the spatially-associated Inglewood oil field. The Baldwin Hills are underlain by gently to moderately arched and conspicuously faulted Cenozoic sedimentary and volcanic rocks that overlie crystalline basement rocks at a depth of more than 10,000 feet. The Inglewood fault, a part of the northwest-trending Newport-Inglewood zone, diagonally transects the hills. Right-lateral displacements of 3,000-4,000 feet since middle or late Pliocene time and 1,500-2,000 feet during Quaternary time are indicated by offset structural and physio-graphic features; indications of vertical separations of up to about 200 feet during late Quaternary time occur locally. Evidence of continuing deformation includes recognized seismicity and regional elevation changes. The M5-5 1/2 Inglewood earthquake of 1920, the largest local earthquake of record, is believed to have originated immediately southeast of the Baldwin Hills; it was apparently unassociated with surficial fault displacements. Leveling in and around the west and central Los Angeles basin has shown that lowland stations have been consistently subsiding, whereas foothill stations commonly have been rising. Several seemingly persistent basins of differential subsidence and a zone of positive movement, roughly coincident with the Newport-Inglewood zone, have also been identified in the northwest part of the basin. A prominent, elliptically-shaped, northwest-trending subsidence bowl encompassing the northwest part of the Baldwin Hills, has been defined by repeated level circuits. Partial reconstruction of selected level circuits with respect to a common, relatively stable control point (Hollywood E-11), located on the edge of the subsidence bowl, has permitted evaluation of the subsidence since 1910 and 1911 at two points near the center of the bowl. Thus bench mark PBM 67 is estimated to have subsided approximately 4.324 feet between June 1910 and February 1963; and bench mark PBM 68 (the only bench mark within the subsidence bowl that was leveled prior to 1926 and has been repeatedly leveled since) subsided 3.846 feet between November 1911 and June 1962. Analysis of the available data indicates little if any elevation change at PBM 68 (or elsewhere throughout the Baldwin Hills-Inglewood area) associated with the Inglewood earthquake of 1920. Maximum subsidence of PBM 122 (which has remained very close to the center of subsidence since at . least 1950) between 1911 and 1963 is calculated to have been 5.67 feet. Horizontal displacements (with respect to a north-south base line about 3 miles east of the hills) of six triangulation points within the subsidence bowl have been measured for various periods between 1934 and 1963. Displacements have been generally toward the center of subsidence and almost precisely perpendicular to the immediately adjacent isobases of equal elevation change. Maximum movement has been recorded at triangulation point Baldwin Aux, which was displaced 2.21 feet between 1934 and 1961; horizontal displacements of three additional points ranged from 0.95 foot to 1.85 feet between 1936 and 1961. Displacements of 0.10-0.29 foot were recorded at all six monuments during the period 1961-1963. "Earth cracks" and surficial fault displacements were recognized in the Baldwin Hills at least as early as 1957. The cracks are relatively straight, generally continuous fractures confined to the structural block east of the Inglewood fault; they are concentrated in two areas centering on (1) the Baldwin Hills Reservoir and (2) the Stocker Street-LaBrea Avenue-Overhill Drive intersection. The cracks trend north to north-northeast and are nearly everywhere parallel to or coincident with minor faults and joints, and are generally orthogonal to radii emanating from the center of subsidence. Differential movement along the cracks has been almost entirely dip slip along steep to nearly vertical surfaces, and generally down-dropped toward the center of subsidence. Cumulative displacements have been as much as 6 or 7 inches. Rates of displacement have ranged widely, and the movement has generally occurred as creep or very small discrete jumps. A probable exception is the several inches of differential movement that is believed to have occurred along a crack through the floor of the Baldwin Hills Reservoir on or about December 14, 1963. The contemporary surface movements are attributable to one or more of the following phenomena: (1). exploitation of the Inglewood oil field; (2) changes in the ground-water regimen; (3) compaction of sedimentary materials in response to surface loading; (4) tectonic activity. The following considerations indicate that the differential subsidence is attributable largely or entirely to exploitation of the underlying Inglewood oil field: (1) the coincidence of the centers of the oil field, the producing structure, and the subsidence bowl; (2) the general correspondence between the pattern of subsidence and the outlines of the oil field; (3) the approximate coincidence between the initiation of production and the initiation of subsidence; (4) the generally linear relations between various measures of subsidence and liquid production from both the field as a whole and the exceptionally prolific Vickers zone in particular; (5) the sharp deceleration of subsidence in the eastern block of the field coincident with the initiation of full-scale water flooding there; (6) the many examples of oil fields In which both spatial and temporal associations between production and subsidence are recognized; (7) the many similarities of the subsidence-production relations in the Inglewood field to those in the Wilmington field, where the subsidence has been authoritatively attributed to oilfield operations; (8) the theoretical relation between subsidence or a tendency toward subsidence and increased effective pressure associated with underground fluid extraction. Consideration of six possible explanations for the increasing rather than decreasing or constant rate of subsidence with respect to reservoir fluid pressure decline suggests that measured or calculated down-hole reservoir fluid pressure decline is non-representative of average or real fluid pressure decline away from producing wells. The near-linear relations between net-liquid production and subsidence are explained through analogy with a tightly confined artesian system of infinite areal extent, where production must derive from liquid expansion and/or reservoir compaction. Test data from compaction studies in two other oil fields yield estimates of ultimate compaction of the Vickers zone resulting from a total loss of fluid pressure; these estimates range over an order of magnitude. The best estimate, based on these data and considerations of late Cenozoic history in the Baldwin Hills area, is about 10 feet. The centripetally-directed horizontal movements are considered attributable to exploitation of the Inglewood oil field on the basis of: (1) their well-defined symmetrical and geometrical association with the differential subsidence; (2) the similarities between these associations and those developed in and around other subsiding oil fields; and (3) the mechanical compatibility of these movements with subsidence induced by the extraction of subsurface materials. The earth cracks and surficial fault displacements are considered largely or entirely attributable to the exploitation of the Inglewood oil field on the basis of: (1) their spatial and temporal relations to both oil-field operations and the differential subsidence; (2) the similarities of these cracks and displacements to those generated in and around other oil fields and areas of subsurface materials extraction; and (3) surface strain patterns predicted from the measured vertical and horizontal surface movements. The cracks and displacements can i)e explained by an exploitation-based, elastic-rebound model which requires elastic compression of the sedimentary section in response to compaction-induced downdrag within those blocks around the periphery of the subsidence bowl. The measured displacements have been about one-quarter to one-half those predicted for a purely elastic system. Analysis of: (1) the history of ground-water extraction within and around the Baldwin Hills; and (2) subsidence associated with water-level declines in sediments comparable with those in the Baldwin Hills, indicate that the surface movements can be no more than incidentally attributed to changes in ground-water conditions. Similarly, analysis of the history of natural and artificial changes in surface loading indicate that these movements are generally unassociated with changes in surface loading conditions. Considerations of local geologic history and various tectonic associations indicate that it is very unlikely that the differential subsidence and horizontal movements are due to tectonic downwarping. There exists a far stronger prima facie argument for tectonic involvement in the earth cracking and associated fault displacements. This argument is disputed by; (1) the spatial and temporal relations of the earth cracks to, and their mechanical compatibility with, the nontectonic differential subsidence; (2) the absence of displacements on the Inglewood fault in conjunction with those along the conjugate earth cracks; (3) the probability that purely tectonic displaceMents would be characterized by oblique or strike slip; and (4) the absence of any clear temporal relation between crack growth and local seismicity, However, because as much as 10 percent of the local isobase gradient may be unexplained' by oil-field exploitation, a small fraction of this gradient, and thus the displacements among the southern group of cracks, may be attributable to tectonic activity. This fraction should have been insignificant in the presence of the strain pattern produced by nontectonic compaction of the underlying oil measures. Because nearly all of the observed and measured surface movements can be fully explained as the products of oil-field operations, yet can be no more than incidentally attributed to changes in ground-water conditions, surface loading, or tectonic activity, we conclude that these movements are attributable largely or essentially entirely to the exploitation of the Inglewood oil field.

California↗
USGS1971

Ground-water reconnaissance of selected sites in Rocky Mountain National Park and Shadow Mountain National Recreation area, Colorado

An evaluation of the ground-water supply potential at 30 sites within the Rocky Mountain National Park and Shadow Mountain National Recreation Area was made by the U.S. Geological Survey in 1967 and 1968. The work consisted of a geohydrologic reconnaissance, well inventory, and test drilling. The study sites are underlain by. Precambrian crystalline rocks, Tertiary sediments, or Quaternary glacial and alluvial deposits. The crystalline rocks are generally poor aquifers; however, some wells intercepting fractures may yield as much as 10 gallons per minute from wells 100 to 200 feet deep. Wells drilled in Tertiary sandstones to a depth of 50 to 500 feet may supply 1 to 50 gallons per minute. Wells drilled in unconsolidated glacial and alluvial deposits of Quaternary age yield the largest supplies of ground water in the Rocky Mountain National Park. These deposits commonly can supply 5 to 100 gallons per minute to wells.

Open-File Report↗
USGS1969

Seismic environment of the Burro Flats site, Ventura County, California: a brief, limited literature review

A limited review of available literature suggests that the maximum horizontal ground acceleration at the Burro Flats site from earthquakes in the region could range from less than 0.1 to 0.49 g. A magnitude 8 earthquake on the nearby San Andreas fault could produce ground acceleration in the range 0.18 to 0.31 g, and an expectable larger earthquake on that fault could produce larger accelerations. Ground motion from possible smaller but closer earthquakes ranges up to 0.49 g for an earthquake of magnitude 6.5 on the adjacent "Burro Flats fault". Estimation of these accelerations is dependent on determining the geologic environment of the site, the appropriate earthquake magnitudes to be assigned significant faults in that environment, and the attenuation of shaking between the earthquake epicenters and the site. The site lies within a tectonically active region--the historically active San Andreas fault is only 34 miles to the northeast, and lesser faults showing evidence of late Quaternary displacement are located closer to the site. Evidence for youthfulness of these lesser faults varies, and except for the active Newport-Inglewood zone and the Santa Ynez fault, they qualify as possible but as yet-unproven active faults. All known faults with appropriate length to site-distance ratios that are reasonably classed as late Quaternary faults are discussed, and are included as potential earthquake generators. Earthquakes of appropriate magnitude to be assigned to each fault are determined by assuming rupture in one event of half the map length of the fault, and applying relations (determined by several authors) between earthquake magnitude and rupture length in historic events to determine magnitudes. These magnitudes are, for the purposes of this brief review, probably reasonable estimates of the capabilities of each fault, although earthquakes of larger magnitude are possible. Accelerations are then determined by assuming earthquakes of the above determined magnitude placed at the closest point to the site on the fault trace, and applying attenuation curves of three different authors. Considerable uncertainty is inherent in the rough estimates of seismic accelerations made herein, for they are dependent on a chain of judgments, each of which, in itself, is uncertain. Present knowledge of the geology of the region is incomplete, so that geometry and structural relations of the faults are in part uncertain, and much evidence bearing on the youth of the faults has yet to be gathered and evaluated. Estimation of earthquake magnitude is also uncertain, and even assuming that approximate magnitude is known rather than estimated from fault length, estimates of maximum ground acceleration may differ greatly depending on the authority used. Further consideration of ground acceleration at the site might refine the estimates made herein and resolve the apparent contradictions between the authorities cited. Attention to frequency and duration of strong shaking would also be appropriate. This study was undertaken at the request of A. J. Pressesky, Assistant Director for Nuclear Safety, Division of Reactor-Development and Technology, U.S. Atomic Energy Commission, in March, 1969. It is based on a brief review of pertinent literature to which the authors had immediate access during the few weeks (April-May, 1969) available for report preparation. Because the report is limited both in scope and thoroughness, it must be considered no more than a first estimate of the tectonic and seismic environment of the Burro Flats site, and should not be considered sufficient, in itself, as a basis for design. The report is intended, however, to indicate the breadth of inquiry that is necessary in the consideration of ground acceleration at sites in California, and to indicate the incomplete status of geologic mapping and other geologic studies in the region. The report describes the tectonic environment of the Burro Flats site, discusses 10 pertinent faults individually, and presents possible earthquake magnitudes for those faults and resultant potential ground accelerations at the site.

California↗
USGS1975

Metallogenic provinces of the southeastern Pacific region

Metalliferous mineral deposits of the southeastern Pacific region include: (1) hydrothermal, magmatic, and sedimentary deposits of the Andean region, one of the great mineral belts of the world; 2) Scattered hydrothermal mineral occurrences in the Antarctic Peninsula; and 3) metal-enriched pelagic sediments, ferromanganese nodules, and volcanic rocks(?) in the southeast Pacific basin. Andean metalliferous deposits, the chief concern of this report, are for the most part spatially and genetically related to calc-alkaline plutons, sub-volcanic intrusions, and volcanic rocks emplaced during the Andean orogeny of Late Triassic to Quaternary age. These deposits are components of a single metallogenic province superimposed on two or more pre-Andean metallogenic provinces that are indicated by scattered deposits of Paleozoic and Precambrian(?) age. Occurrences in the Antarctic Peninsula are of age and origin similar to the deposits in the Andes and are considered to belong to the Andean province. The Andean metallogenic province may be divided into several subprovinces, each parallel to the Andes and the continental margin and each having a dominant metal or suite of metals. The central Andes of Peru, northern Chile, and Bolivia, which contain the greatest concentration of exploitable deposits and the greatest variety of ore types, have as many as five linear partly overlapping subprovinces. These sub-provinces, from west to east (Pacific coast to the eastern Andean front), are characterized, respectively, by deposits of : 1) iron; 2) copper, with or without associated gold; 3) polymetallic base metals (zinc, lead, copper), generally containing silver; 4) tin; and 5) gold. Iron deposits chiefly are near the coast in central to northern Chile and in southern Peru. The copper and polymetallic provinces are characterized by abundant deposits in the central Andean region but comparatively few scattered deposits in the north (Ecuador, Colombia, and Venezuela) and in southern Chile and Argentina. Scattered gold-rich veins and placers occur along the western Andean front and coastal region, the general area of the copper province, from central Chile to northern Colombia. Similar deposits occur along a discontinuous belt in the eastern Andes from Bolivia to Ecuador and in the central Andes of Colombia. Tin deposits are almost wholly restricted to the eastern Andes of Bolivia. The position and age distribution of plutonic and volcanic rocks and associated metalliferous deposits of the Andes indicate presence of an active subduction zone in this region since at least Late Triassic time. Magmas of the calc-alkaline igneous rocks are believed to have formed chiefly by partial melting of mantle, oceanic sediments, and oceanic crust along the Benioff zone at depths of 100 to 200 km. Plutonic and volcanic rocks show a general though nonuniform progression of decreasing age from west to east. Rocks of Jurassic and Cretaceous age are most abundant near the coast, whereas those of Tertiary and Quaternary age dominate in the Andes. Locally, intrusive rocks and ore deposits of widely different ages are juxtaposed. Metals of the ore deposits associated with the calc-alkaline rocks were supplied by the source rocks in the Benioff zone, some of which probably had been previously enriched in certain metals at the ancestral East Pacific Rise and were mobilized or assimilated from metal-rich zones in the overlying mantle and continental crust by magmas rising from the Benioff zone.

Open-File Report↗
USGS1976

Sampling procedures and catalogue of samples for eight boreholes at Clear Lake, Lake County, California

Clear Lake, California, is situated in an area which has been subject to crustal movement, earthquake-generated ground shaking, volcanic eruptions, and climatic fluctuations during late Quaternary time. The U.S. Geological Survey, in cooperation with Lake County, has undertaken a study of the seismic, volcanic, and environmental history recorded in the late Quaternary sediments beneath the floor of the lake (Sims, 1974). This study is based on continuous core samples measuring 12 cm or 15 cm in diameter that were obtained in August-November, 1973, from 8 boreholes measuring 14-113 m in length (Figure 1). Preliminary description of many of these samples and interpretation of ancient seismic events can be found in Sims and Rymer (1975). Over 2,000 multiple samples have been taken from these cores in order to study the environmental record preserved in the lacustrine sediments. Samples were taken for pollen, diatoms, cladocera, bulk mineralogy, fine size analysis, macrofossils, and water-content/organic carbon-content at designated depths. In addition, volcanic ash and radiocarbon samples were removed for correlation studies and age determinations. This report provides a description of the standard sampling procedures designed for sapropelic muds and peat-rich clays, a description of modified sampling procedures developed for sampling sands and coarser sediments, and a catalogue of samples from the Clear Lake cores. Table 2 outlines the steps followed for the standard sampling procedures.

California↗
USGS1977

Surface sedimentary units of the Gulf of Alaska continental shelf: Montague Island to Yakutat Bay

Four major sedimentary units occur on the sea floor of the continental shelf in the northern Gulf of Alaska. These units, defined on the basis of seismic and sedimentologic data, are: (1) Holocene sediments, (2) Holocene mind moraines, C3) Quaternary glacial marine sediments, and (4) Tertiary and Pleistocene lithified deposits. A wedge of Holocene fine sand to clayey silt covers most of the inner shelf, reaching maximum thicknesses of about 350 m seaward of the Copper River and about 200 m seaward of Icy Bay. Holocene end moraines are found at the mouth of Icy Bay, south of Bering Glacier, and at the mouth of Yakutat Bay. Quaternary glacial marine sediments are found in a narrow arc that borders, on the north and west side of Tart Bank and in a large arc 20 km or more offshore that parallels the shoreline between Kayak Island and Yakutat Bay. Tertiary or Pleistocene stratified sedimentary rocks, which in profile commonly are folded, faulted, and truncated, crop out on Tarr Bank, offshore of Montague Island, and in several localities southeast and southwest of Cape Yakataga. The lack of Holocene cover on Tarr Bank and Middleton, Kayak and Montague Island platforms may be due to the scouring action of swift bottom currents and large storm waves. West of Kayak Island the Copper River is the primary source of Holocene sediment. East of Kayak Island the major sediment sources are streams draining the larger ice fields, notably, the Malaspina and Bering Glaciers. Transport of bottom and suspended sediment is predominantly to the west. If deglaciation of the shelf was completed by 10,000 years B.P., maximum rates of accumulation of Holocene sediment on the inner shelf may be as high as 10-35 m per 1,000 years.

Open-File Report↗
USGS1977

Geology of the Monterey Bay region

Geophysical data and sea floor samples collected from the continental shelf and slope between Ano Nuevo Point and Point Sur, California indicate that the Monterey Bay region has had a complex late Cenozoic tectonic history. Uplift and depression have produced a succession of regressive and transgressive sedimentary units, while contemporaneous right-slip along faults of the San Andreas system have offset major structural and lithologic elements. This deformation produced three regional and several local unconformities within upper Tertiary rocks and initiated development of a canyon system that today includes the Monterey, Ascension, Carmel, and other large submarine canyons. The Tertiary stratigraphy of the offshore Monterey Bay area is divided into two provinces by a major structural boundary, the north-trending Palo Colorado-San Gregorio fault zone. East of this zone in the offshore are four seismically distinct sequences that can be correlated with major sequences onshore. These sequences comprise (1) pre-Tertiary basement, and (2) middle Miocene, (3) upper Miocene to Pliocene, and (4) upper Pliocene to Holocene sedimentary intervals. Each of the latter three sequences is bounded by unconformities, as is its counterpart on land. Only Neogene sedimentary rocks are present offshore; Paleogene units, if originally present, have been removed completely by pre-middle Miocene erosion. An extensive erosional surface was cut during Zemorrian time into the late Mesozoic granitic basement rocks. Incised into this surface are the ancestral Monterey Canyon and an unnamed canyon. Marine sedimentary rocks of upper Miocene and Pliocene age overlie this unconformably and fill the unnamed canyon. Similar rocks also may have once filled Monterey Canyon. Near shore these strata are covered by terrestrial alluvial and eolian deposits, deltaic deposits, marine canyon fill, landslide and slump deposits, and unconsolidated sediments that range in age from upper Pliocene to Holocene. Monterey Canyon appears to have been filled and exhumed at least twice since its inception in Oligocene time, once in late Miocene and once in Pleistocene time. Three major seismic stratigraphic units are apparent in continuous seismic reflection profiles from the offshore area west of the Palo Colorado-San Gregorio fault zone. These are (1) acoustical basement, and (2) middle Tertiary and (3) late Tertiary to Quaternary sedimentary intervals. Acoustical basement comprises Cretaceous to early Tertiary sedimentary rocks, Mesozoic or older metamorphic rocks, and Cretaceous or Jurassic rocks of the Franciscan assemblage. The middle Tertiary sequence consists of sedimentary rocks of questionable Miocene age. The late Tertiary to Quaternary sequence is composed of Pliocene sedimentary rocks and unconsolidated marine sediments, and submarine landslide and slump deposits. Seismic reflection surveys indicate two major, intersecting, northwest-trending fault zones to be present in the offshore Monterey Bay area. The Palo Colorado-San Gregorio fault zone may be more than 200 km long; it is narrow (approximately 3 km wide) and is represented in most places by one or two faults. This zone appears to connect with faults mapped on land near Ano Nuevo Point and Point Sur. The Monterey Bay fault zone, located in the area between Santa Cruz and Monterey, is a diffuse zone, approximately 10 to 15 km wide, of en echelon faults. Faults within this zone appear to connect with faults on land near Monterey, and the zone appears to be truncated by the Palo Colorado-San Gregorio fault zone west of Santa Cruz. Locations of more than 110 earthquakes (1968-1976) show that the newly mapped fault zones in Monterey Bay are seismically active. Epicenters in the bay form two clusters, one at the intersection of the Monterey Bay and Palo Colorado-San Gregorio fault zones, and the other in a linear belt that trends northwest along the Palo Colorado-San Gregorio fault zone. Faults within th

California↗
USGS1978

The marine geology of the eastern Santa Barbara Channel, with particular emphasis on the ground water basins offshore from the Oxnard Plain, Southern California

Marine geophysical investigations provide new data concerning the stratigraphy, tectonic and sedimentary history, and the ground water geology of the southeastern Santa Barbara Channel region. The offshore stratigraphy identified in seismic reflection profiles includes a succession of Neogene to Quaternary strata. The middle Miocene Conejo volcanics form an acoustical basement and the overlying late Cenozoic sedimentary rocks attain a thickness greater than 2,500 m. These sedimentary deposits fill a structurally controlled, physiographic and depositional depression called the Ventura Basin. Structure consists generally of a gently folded, east-trending Tertiary synclinorium bordered on the north by a regional thrust fault and on the south by a steep asymmetrical anticlinal ridge. Most structures show evidence of north-south compression that occurred during early Pleistocene time. Three well-defined unconformities represent widespread erosion in late Miocene, early to middle Pleistocene, and late Pleistocene time. The boundaries of Miocene, Pliocene, and lower Pleistocene strata continue uninterrupted eastward along the southern part of Santa Barbara basin to Hueneme Canyon, where they turn northeast and can be traced to the coast near Port Hueneme. These limits probably represent the south edge of the Santa Barbara basin during Pliocene and Pleistocene time. Fresh water-bearing materials of the Oxnard plain are unconsolidated Quaternary sediment laid down on more consolidated Tertiary rocks. Offshore, the total fresh water-bearing materials distinguished in the seismic reflection profiles attain a thickness of about 356 m and have an areal extent of over 760 km2. Strata that contain the offshore continuation of the five major on-land aquifers (Grimes Canyon, Fox Canyon, Hueneme, Mugu, and Oxnard aquifers) are identified in the seismic reflection profiles. These strata make up the two offshore ground-water basins, the Mound and Oxnard plain ground-water basins, which are separated by the east-west trending Oak Ridge fault. Possible entrance areas for salt water intrusion into fresh water aquifers are found along the walls of the submarine canyons and along the northern slopes of Santa Barbara and Santa Monica basins. Hueneme and Mugu aquifers are probably exposed locally in all five submarine canyons of the Oxnard offshore area and may also crop out along the upper northern slope of Santa Monica basin. In all of these areas, salt water readily intrudes the aquifers. A salinity-temperature-depth study made in April, 1971, does not indicate any great dilution of surface ocean water by fresh water that could be 'leaking' from the exposed aquifers along the walls of Hueneme Canyon and the landward slope of Santa Barbara Channel. Earthquakes in the vicinity of the Oxnard plain suggest that the region is seismically active. Epicenters are widely dispersed over the region. No distinct trend or alignment of earthquake epicenters occurs near the trace of any of the faults, although many epicenters are scattered around the Oak Ridge zone of deformation in the northern part of the region. The largest magnitude earthquake recorded in the area was a magnitude 5.7 that occurred on February 21, 1973, offshore of Point Mugu, south of the Oxnard plain.

California↗
USGS1978

Reconnaissance engineering geology of the Petersburg area, southeastern Alaska, with emphasis on geologic hazards

A program to study the engineering geology of most larger Alaska coastal communities and to evaluate their earthquake and other geologic hazards was started following the 1964 Alaska earthquake; this report about the Petersburg area is a product of that program. Field-study methods were of a reconnaissance nature, and thus, interpretations in the report are tentative. Landscape of the northern end of Mitkof Island on which Petersburg is situated is characterized by a gently sloping, muskeg-covered terrain, with altitudes mostly less than 30 m. In contrast, much of the rest of the island is composed of mountainous terrain with many steep valleys. During the Pleistocene Epoch, the Petersburg area presumably was covered by ice several times; glaciers deeply eroded many valleys on Mitkof Island and adjacent areas. The last major deglaciation probably was largely completed by 12,000 years ago. Delayed rebound of the earth's crust, after the melting of large amounts of ice, permitted extensive inundation of land in the Petersburg area. Subsequently, emergence has elevated marine deposits to a present-day altitude of at least 65 m and probably to 75 m. Bedrock in the Petersburg map area is composed of relatively hard metamorphic rocks, chiefly phyllite and probably some graywacke. Rocks are of Middle(?) Jurassic to Early Cretaceous age. Five types of surficial geologic material of Quaternary age were recognized: (1) mixed deposits consisting of diamicton, silt-clay, and sand or sandy pebble gravel, (2) alluvial deposits, (3) shore and delta deposits, (4) organic deposits, and (5) artificial fill. Geologic structure in southeastern Alaska is complex because several cycles of tectonic deformation since at least early Paelozoic time have affected different parts of the region. The latest of the major tectonic events in southeastern Alaska occurred in Tertiary time, with some minor activity continuing into the Quaternary Period. Along the outer coast of southeastern Alaska, active strike-slip movement is occurring along the Chichagof-Baranof and Queen Charlotte faults. A segment of the prominent Coast-Range lineament, part of which may be a fault, lies 18 km northeast of Petersburg. Many earthquakes occur along the outer coast of southeastern Alaska. Most of these shocks are associated with movements along the Chichagof-Baranof, Queen Charlotte, and Transition faults. A few small earthquakes occur in the region between the outer coast and the southern part of the Coast Mountains. 0nly a few earthquakes have been recorded as felt at Petersburg; these shocks and others possibly felt in the Petersburg region are tabulated. Among the recorded earthquakes the highest intensity (about V-VI) as the magnitude 7.1 earthquake of October 24, 1927, that occurred probably along the Chichagof-Baranof fault, and about 225 km northwest of Petersburg; damage was reported as minor. Other large earthquakes along the Chichagof-Baranof fault that affected or probably affected the Petersburg area in a minor way occurred on August 22, 1949 (magnitude 8.1) and on July 30, 1972 (magnitude 7.25). From a consideration of the tectonics and earthquake history of the region, earthquakes similar to the 1927, 1949, and 1972 shocks are expected to recur on segments of the Chichagof-Baranof or Queen Charlotte faults. The closest of these fault segments is about 170 km southwest from Petersburg. The likelihood of destructive earthquakes being generated along faults closer to Petersburg is unknown. A very generalized discussion of possible geologic effects that could occur in the area during a postulated, theoretically reasonable worst case earthquake of magnitude 8 occurring along the outer coast about 170 km southwest from Petersburg notes that ground shaking probably would be strongest on organic deposits and least on bedrock and on firm, compact diamicton. Among other effects that could happen are: (1) liquefaction of some of the few delta and alluvial

Open-File Report↗
USGS1981

Composition of tidal flat sediments, Willapa Bay, Washington

The purpose of this study was to characterize the modern sediments of sandy tidal flats in Willapa Bay, Washington based on their composition. Generally, clay comprises less than five percent of the sediment. Clay content increases upslope and up-estuary. Principal clay minerals are montmorillanite, illite, and chlorite; two clay mineral suites are present: (1) muddy flat suite with clay containing 44% montmorillonite, and (2) sandy flat suite with clay composition of 88% montmorillonite. Heavy minerals make up approximately four percent of the tidal flat sediment. Distribution of heavy minerals reflect their source with (1) heavy minerals most abundant near the beach on flats to the north where they were eroded out of terrace deposits, and (2) relatively greater heavy mineral concentrations (supplied by the Naselle River) across the entire flat to the south. The composition of the heavy mineral suite is mainly clinopyroxene, orthopyroxene, hornblende, epidote, and opaque minerals. This mineral suite represents several sources including rivers, ocean and ocean beaches, and reworked local Tertiary and Quaternary deposits. Tidal flat sediments are approximately 90% light minerals, mostly quartz. The light fraction also contains small quantities of lithic fragments, pumice, vegetation, and biogenic shell fragments. Tertiary and Quaternary terrace deposits are the major source of most of the light material. Fossils make up less than one percent of the bottom sediment. Two foram assemblages are present: (1) a modern shallow-water assemblage characterized by Trochammina inflata, found mainly in muddy flats near rivers, and (2) a relic deep-water assemblage (Eocene to Cretaceous) characterized by such species as Bathysiphon and Cyclammina found predominantly on the sandy flats. Macrofossils consists of shells of the modern tidal flat mollusc assemblage. Organic sediments were mostly carbon (1%). The highest concentrations of organic carbon are associated with muddy sediments near the Palix River and Pickernell Creek; overall, organic carbon concentration increased up-estuary. C/N ratios are transitional between open marine environments and marsh deposits of estuaries.

Washington↗
USGS1982

Availability and quality of water from the Dakota aquifer, northwest Iowa

The Dakota aquifer in northwest Iowa consists of sandstones in the Dakota Formation. It underlies most of the study area and is the most extensive source of ground water in the area. Individual sandstone beds are from less than 10 to more than 150 feet thick. The cumulative thickness of sandstone is more than 200 feet throughout much of the area. The aquifer is confined by overlying Cretaceous limestone and shale, Quaternary glacial deposits and loess. The underlying confining material is shale of the Dakota Formation, undifferentiated Paleozoic age rocks, or Precambrian crystalline rock. Water flows through the aquifer from the north-central part of the study area to the east, south and southwest. Recharge is dominantly by infiltration from the land surface through the confining materials. Discharge is to underlying Paleozoic aquifers and to the alluvium and glacial outwash deposits along the Missouri and Big Sioux Rivers in the southwest part of the area. Flow components toward bedrock valleys may reflect discharge to Quaternary sand and gravel deposits in these valleys. Pumping tests conducted in the study area indicate a narrow range of hydraulic conductivities of the Dakota aquifer, from 37 to 50 feet per day. Consequently, an average hydraulic conductivity of 40 feet per day was used to estimate the potential yield to wells completed in the aquifer. Yields of more than 250 gallons per minute can be expected throughout much of the study area and more than 1000 gallons per minute could be produced in some areas. The quality of water from the Dakota is a calcium, magnesium, sulfate type. It is generally suitable for irrigation purposes, based on comparisons of sodium adsorption ratios and electrical conductivities. In some areas the aquifer has water with high salinity hazard that may restrict its use to irrigation of only well drained types of soil. The concentration of radium226 and other radionuclides exceed recommended limits at several sites. The quality of water pumped from the aquifer may be altered by induced leakage from the underlying aquifers in Paleozoic age rocks if withdrawals reverse the pattern of natural flow from the Dakota into the Paleozoic aquifers. Evidence for such a reversal exists in the area around the city of LeMars.

Iowa↗
USGS1982

Reconnaissance geology of the Wadi Amq Quadrangle, sheet 18/41 C, Kingdom of Saudi Arabia

The Wadi Amq quadrangle (sheet 18/41 C) lies between lat 18?00' and 18?30' N. and long 41?00' and 41?30' E. and encompasses an area of 2,937 km2, of which only about 150 km2 is land; the remainder is covered by the Red Sea. The only geologic formations exposed in the quadrangle are Quaternary volcanic rocks and surficial deposits. Most of the volcanic rocks are basalt that was extruded during a continuation of the opening of the Red Sea rift. The Quaternary surficial deposits include those of shallow bank and coral reefs, carbonate sand, sabkhahs, pediment and plains, and alluvial sand and gravel. The coral reefs could possibly provide raw material for a cement industry if required, and the sabkhahs might yield useful salts; otherwise the quadrangle has no economic mineral potential.

Open-File Report↗
USGS1982

Reconnaissance geology of the Jabal Shaqran Quadrangle, sheet 17/44 B, Kingdom of Saudi Arabia

The Jabal Shaqran quadrangle lies in the southeastern Asir province, mostly within the westernmost part of the Rub al Khali desert, and is largely covered by Quaternary deposits. Proterozoic crystalline rocks are exposed as inselbergs or rock pediment surfaces along the western border of the quadrangle. The crystalline basement is metavolcanic rock intruded by plutonic to hypabyssal rocks consisting of diorite and gabbro, biotite tonalite gneiss, biotite-hornblende monzogranite, biotite-sodic amphibole granite, and syenogranite to quartz syenite, listed in the inferred order of emplacement. Rhyolite-dacite fels, associated with andesitic to basaltic metavolcanic flow rocks and minor amphibolite, is interpreted to have resulted from metasomatic alteration of the flow rocks during emplacement of granitic plutons. The Wajid Sandstone, of Cambrian to Ordovician age, is largely a coarse-grained quartz arenite with pebbly phases; common crossbedds indicate north-northwest to north-northeast directions of sand transport. Beds are cemented by iron oxide, carbonate, and minor quartz. The Wajid Sandstone is exposed only in the northwestern and northern parts of the quadrangle. Quaternary deposits record a climate that became increasingly more arid. They include Holocene and Pleistocene(?) alluvial and fluvial deposits of sand, gravel, and silt, minor carbonate crusts, and eolian sand and silt. Gravel terraces and gravel plains less than 10 m above the present major wadi channels are widespread and commonly are overlain by marly silt along the wadis. Between major wadis, which discharge into the Rub al Khali basin, gravel-topped surfaces are partly covered by a complex of low, sinuous, discontinuous, generally northwest trending transverse sand dunes. Normal to this trend, higher and more extensive linear dunes and dune complexes, including seif (irq) dunes as high as 50 m, have encroached southwestward. The transverse and linear dunes may represent two stages of advance separated by a pluvial cycle. Studies of aerial photographs indicate that the dunes have not changed appreciably in shape or size between 1951 and 1959, although some seif dunes have advanced their leading edges 15 to 25 m. No potentially economic mineral resources other than sand and gravel were found.

Open-File Report↗
USGS1982

Geohydrology of principal aquifers in the Republican River basin, Kansas

Principal aquifers in the Republican River basin in Kansas are unconsolidated alluvial deposits. One such aquifer is formed by the Ogallala Formation of Miocene age which covers most of the western part of the area. Because saturated thickness of the aquifer decrease northeastward, maximum yields to irrigation wells decrease in that direction from 2,000 to 500 gallons per minute. The Grand Island Formation of Pleistocene age occurs in an ancestral channel of the Republican River in northeast Jewell and northwest Republic counties. The maximum yield to wells from this aquifer was estimated to be 2,000 gallons per minute. Quaternary alluvium of Pleistocene and Holocene age occurs in most major stream valleys. The aquifer in the Republican River valley yields as much as 2,000 gallons per minute to irrigation wells. Water levels in the Ogallala Formation commonly declined from 5 to 40 feet during 1950-77 as a result of irrigation withdrawals. Recharge from irrigation by stream diversions have raised water levels as much as 25 feet in the Grand Island Formation and as much as 15 feet in the Quaternary alluvium of the Prairie Dog Creek valley. (USGS)

Open-File Report↗
USGS1982

Structure and petroleum potential of the continental margin between Cross Sound and Icy Bay, northern Gulf of Alaska

Major structural features of the Yakutat segment, the segment of the continental margin between Cross Sound and Icy Bay, northern Gulf of Alaska, are delineated by multichannel seismic reflection data. A large structural high is centered on Fairweather Ground and lies generally at the edge of the shelf from Cross Sound to west of the Alsek Valley. A basement uplift, the Dangerous River zone, along which the seismic acoustic basement shallows by up to two kilometers, extends north from the western edge of Fairweather Ground towards the mouth of the Dangerous River. The Dangerous River zone separates the Yakutat segment into two distinct subbasins. The eastern subbasin has a maximum sediment thickness of about 4 km, and the axis of the basin is near and parallel to the coast. Strata in this basin are largely of late Cenozoic age (Neogene and Quaternary) and approximately correlate with the onshore Yakataga Formation. The western subbasin has a maximum of at least 9 km of sediment, comprised of a thick (greater than 4.5 km) Paleogene section overlain by late Cenozoic strata. The Paleogene section is truncated along the Dangerous River zone by a combination of erosion, faulting, and onlap onto the acoustic basement. Within the western subbasin, the late Cenozoic basin axis is near and parallel to the coast, but the Paleogene basin axis appears to trend in a northwest direction diagonally across the shelf. Sedimentary strata throughout the Yakutat shelf show regional subsidence and only minor deformation except in the vicinity of the Fairweather Ground structural high, near and along the Dangerous River zone, and at the shoreline near Lituya Bay. Seismic data across the continental slope and adjacent deep ocean show truncation at the continental slope of Paleogene strata, the presence of a thick (to 6 km) undeformed or mildly deformed abyssal sedimentary section at the base of the slope that in part onlaps the slope, and a relatively narrow zone along the slope or at the base of the slope where faulting may have occurred. Observed deformation at the base of the slope is primarily related to the late Cenozoic uplift of Fairweather Ground, and to Quaternary folding perpendicular to the Pacific-North America relative convergence vector. No accretionary section or major deformation is observed along the continental slope. The absence of these features suggests that no major subduction of the Pacific plate beneath the Yakutat margin has occurred during the late Cenozoic. However, transform faulting along the base of the slope has occurred, because probable Oligocene oceanic basement is juxtaposed against Mesozoic and Paleogene sedimentary strata of the Yakutat slope. This juxtaposition most likely occurred during late Oligocene and Miocene time. During much of the late Cenozoic, and especially during Pliocene-Pleistocene time, the Yakutat segment has apparently been moving northward with the Pacific plate. Dredge samples from the continental slope recovered potential hydrocarbon source and reservoir rocks from the Paleogene sedimentary sequence. Most of the organic matter from these samples is immature to marginally mature. Lopatin calculations suggest that rocks beneath the shelf are likely to be thermally mature at a depth of 4 to 5 km and deeper. In general, the strata at these depths are largely of Paleogene age. Thus, the Paleogene strata may have significant resource potential if source and reservoir rocks similar to those dredged at the slope are present below the shelf. The Paleogene strata are contained primarily within the western subbasin; strata in the east subbasin appear to have little resource potential. Structural traps are apparently present in parts of the basin near and along the Dangerous River zone. These traps are in an updip position from potentially mature strata of the western subbasin, and may hold commercial accumulations of hydrocarbons, if sufficient hydrocarbon generation and migration has occurred

Open-File Report↗
USGS1982

Preliminary appraisal of gravity and magnetic data at Syncline Ridge, western Yucca Flat, Nevada Test Site, Nye County, Nevada

A gravity and magnetic study of the Syncline Ridge area was conducted as part of an investigation of argillite rocks of the Eleana Formation under consideration as a medium for the possible storage of high-level radioactive waste. Bouguer gravity anomaly data, viewed in light of densities obtained by gamma-gamma logs and previous work of D. L. Healey (1968), delineate two regions of steep negative gradient where Cenozoic rocks and sediments are inferred to abruptly thicken: (1) the western third of the study area where Tertiary volcanic rocks are extensively exposed and (2) the northeast corner of the area where Quaternary alluvium is exposed and where volcanic rocks are inferred to occur at depth. In the remainder of the area, a region extending contiguously from Mine Mountain northwestward through Syncline Ridge to the Eleana Range, the gravity data indicate that the Eleana Formation, where not exposed, is buried at depths of less than about 200 m, except in a limited area of exposed older Paleozoic rocks on Mine Mountain. Quaternary alluvium and Tertiary volcanic rocks are inferred to occur in this region as veneers or shallow dishes of deposit on Tippipah Limestone or Eleana Formation. Low-level aeromagnetic anomaly data, covering the western two-thirds of the study area, delineate relatively magnetic tuff units within the Tertiary volcanic rocks and provide a very attractive means for distinguishing units of normal polarization from units of reversed polarization. If used in conjunction with results of previous magnetization studies of G. D. Bath (1968), the low-level survey may prove to be an effective tool for mapping specific tuff members in the volcanic terrane. The important question of the feasibility of discriminating high-quartz argillite from low-quartz argillite of the Eleana Formation using surface gravity data remains unresolved. If the more highly competent, denser, high-quartz phase should occur as stratigraphic units many tens of meters thick, closely spaced gravity data may reliably detect these units. If the high-quartz phase occurs only as relatively thin units, interbedded with low-quartz phase, borehole gravity surveying can be used much more effectively than equivalent surface gravity surveying.

Nevada↗
USGS1983

Hydrology of area 54, northern Great Plains, and Rocky Mountain coal provinces, Colorado and Wyoming

A nationwide need for information characterizing hydrologic conditions in mined and potential mine areas has become paramount with the enactment of the Surface Mining Control and Reclamation Act of 1977. This report, one in a series covering the coal provinces nationwide, presents information thematically by describing single hydrologic topics through the use of brief texts and accompanying maps, graphs, or other illustrations. The summation of the topical discussions provides a description of the hydrology of the area. Area 54, in north-central Colorado and south-central Wyoming, is 1 of 20 hydrologic reporting areas of the Northern Great Plains and Rocky Mountain coal provinces. Part of the Southern Rocky Mountains and Wyoming Basin physiographic provinces, the 8,380-square-mile area is one of contrasting geology, topography, and climate. This results in contrasting hydrologic characteristics. The major streams, the North Platte, Laramie, and Medicine Bow Rivers, and their principal tributaries, all head in granitic mountains and flow into and through sedimentary basins between the mountain ranges. Relief averages 2,000 to 3,000 feet. Precipitation in the mountains may exceed 40 inches annually, much of it during the winter, which produces deep snowpacks. Snowmelt in spring and summer provides most streamflow. Precipitation in the basins averages 10 to 16 inches annually, insufficient for sustained streamflow; thus, streams originating in the basins are ephemeral. Streamflow quality is best in the mountains where dissolved-solids concentrations generally are least. These concentrations increase as streams flow through sedimentary basins. The increases are mainly natural, but some may be due to irrigation in and adjacent to the flood plains. In the North Platte River, dissolved-solids concentrations are usually less than 300 milligrams per liter; in the Laramie and the Medicine Bow Rivers, the concentrations may average 500 to 850 milligrams per liter. However, water-quality stations on the Laramie and the Medicine Bow Rivers are farther removed from the mountain sources than the stations in the North Platte drainage. Because of the semiarid climate of the basins, soils are not adequately leached. Consequently, flow in ephemeral streams usually has a larger concentration of dissolved solids than that in perennial streams, averaging 1,000 to 1,600 milligrams per liter. Aquifers containing usable ground water are combined into three groups: (1) consolidated and unconsolidated non-coal-bearing Quaternary and Upper Tertiary deposits, (2) Mesozoic and Paleozoic sedimentary rocks, and (3) Lower Tertiary and Upper Cretaceous sedimentary rocks containing coal. These aquifers are used for municipal, domestic, irrigation, and stock supplies. Well yields range from about 5 to 1,000 gallons per minute, and depend on type of aquifer, saturated thickness, and degree of fracturing. The best quality ground water usually comes from the non-coal-bearing Quaternary and Upper Tertiary rocks or the Mesozoic and Paleozoic rocks; often it is dominated by calcium and bicarbonate ions. The coal-bearing formations have a large variability in water chemistry; dominant ions may be bicarbonate or sulfate and sodium, calcium, or magnesium. Dissolved-solids concentrations are generally larger than in the former two groups. The U.S. Geological Survey operates a network of hydrologic stations to observe the streamflow and groundwater conditions. This network currently includes 31 surface-water stations and 35 observation wells; information is available for many other sites observed in the past. Data available include rate of flow, water levels, and water quality; much of the data are available in published reports or from computer storage through the National Water Data Exchange (NAWDEX) or the National Water Data Storage and Retrieval System (WATSTORE). Five formations of Late Cretaceous and early Tertiary age contain coal.

Colorado, Wyoming↗
USGS1985

Reconnaissance geologic map of the Jizan Quadrangle, sheet 16/42 B, Kingdom of Saudi Arabia

The Jizan quadrangle, bounded by lat 16°30’ and 17°00’ N. and long 42°30’ and 43°00’ E., is one of the southernmost quadrangles of the Kingdom of Saudi Arabia. It is named after Jizan, the largest city and principal port of the region, with about 30,000 inhabitants. Other significant towns and villages include Abu Arish, Al Madayah and Karbus, all linked to Jizan and adjoining quadrangles by paved roads. Most of the quadrangle is occupied by coastal plain bordering the Red Sea; one third is occupied by part of the Red Sea and the extreme northeast corner includes foothills of the Red Sea escarpment. The coastal plain, as much as 40 km wide, is covered by Quaternary surficial deposits overlying a sequence of Tertiary and Quaternary sedimentary rocks as much as 5 km thick. The only relief on the plain is provided by the Jizan salt dome, elevated about 50 m above sea level at Jizan city, and by small extinct volcanoes 100 to 150 m high near Abu Arish. The coastal plain is separated form islands, tidal mud flats and shallow lagoons. The sea is shallow, less than 200 m deep, and forms part of the shelf marginal to the main axial trough of the Red Sea. The high ground in the northeast of the quadrangle is formed by Jabal at Tirf, 452 m above sea level at its summit.

Open-File Report↗